Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are robust, precision-fabricated protective sleeves designed to guard the outer surfaces of tubes in boilers, heat exchangers, incinerators, and high-temperature processing equipment. Engineered to extend the service life of tubes exposed to corrosive gases, abrasive particulates, and elevated temperatures, these shields provide a reliable barrier against mechanical and chemical degradation. The half-round design facilitates easy installation while ensuring a secure, form-fitting layer of defense. 1Cr13 Half Round Tube Shield The 1Cr13 Half Round Tube Shield is a semi-cylindrical component manufactured from martensitic stainless steel containing approximately 13% chromium. Classified under the 1Cr13 grade, this alloy delivers good corrosion resistance, excellent wear performance, and moderate strength at elevated temperatures. It is especially suited for thermal environments that are not extremely oxidizing or carburizing but where erosion and mechanical wear are a concern. With a higher hardness potential through heat treatment and moderate thermal resistance, 1Cr13 shields are ideal for applications involving flue gas exposure, soot-laden atmospheres, and temperature cycling. The shield’s half-round configuration is precision-engineered for optimal tube coverage and long-term durability. It offers a balance of strength, corrosion resistance, and cost-effectiveness, making it suitable for a wide range of industrial processes. Chemical Composition of 1Cr13 – Martensitic Stainless Steel • Carbon (C): 0.15 – 0.20% • Silicon (Si): ≤ 1.00% • Manganese (Mn): ≤ 1.00% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.030% • Chromium (Cr): 12.0 – 14.0% • Nickel (Ni): ≤ 0.60% • Iron (Fe): Balance Uses • Boiler Tube Protection – Shields tube surfaces from flue gas erosion, ash particle abrasion, and soot buildup in economizers and waterwalls. • Heat Exchanger Tubes – Provides an extra layer of wear resistance in zones prone to mechanical stress and fluid turbulence. • Incinerator and Waste Heat Units – Guards tubes exposed to fluctuating temperatures, slag, and particulate deposits. • Cement Plant Piping – Protects tubing and ducts in kiln exhaust systems from abrasive dust and high flow velocity. • Air Preheaters and Recuperators – Enhances the durability of components subjected to temperature variations and corrosive gases. Features • Moderate Oxidation Resistance – Chromium content enables good performance in mildly oxidizing environments and intermittent exposure to high temperatures. • Wear and Abrasion Resistance – Martensitic structure offers high surface hardness and resistance to mechanical wear. • Heat Treatable – Can be hardened to increase durability and resistance to deformation. • Cost-Effective – Provides a lower-cost alternative to austenitic and superalloy shields for moderate service conditions. • High Dimensional Accuracy – Manufactured with tight tolerances to ensure secure fitment and uniform tube coverage. • Convenient Installation – Half-round shape enables quick mounting through welding or clamping techniques. • Versatile Finishing Options – Supplied with pickled or mechanically polished surfaces to improve corrosion resistance and adhesion. Applications • Power Generation – Used in economizer, preheater, and convection sections of boilers to prevent erosion and fouling. • Chemical and Fertilizer Plants – Protects exposed tube surfaces in systems with moderate chemical exposure. • Metallurgical Furnaces – Shields mechanical and flue components exposed to particulate movement and temperature cycling. • Pulp and Paper Industry – Used in recovery boilers and heat exchangers where corrosion resistance and mechanical strength are both required. • Petrochemical Plants – Applied in lower-temperature zones where scaling and erosion are primary concerns. Conclusion The 1Cr13 Half Round Tube Shield by Ladhani Metal Corporation provides an optimal solution for industrial tube protection in moderate temperature and corrosion environments. Its martensitic stainless steel composition ensures excellent wear resistance, good oxidation stability, and structural strength at a competitive cost. Designed for easy installation and reliable performance, these shields are ideal for various applications in power, process, and heat recovery systems. Custom-built to meet specific dimensions, material thicknesses, and finishing preferences, 1Cr13 tube shields offer dependable service life extension for critical heat transfer equipment. For technical specifications, pricing, or customization inquiries, please contact Ladhani Metal Corporation.

Half Round Tube Shield Ladhani Metal Corporation manufactures 1Cr25Ni20Si2 Half Round Straight Tube Shields to deliver exceptional protection to straight boiler and heat exchanger tubes in aggressive high-temperature environments. 1Cr25Ni20Si2 Half Round Straight Tube Shield The 1Cr25Ni20Si2 Half Round Straight Tube Shield is fabricated in a semi-cylindrical form to protect the outer surface of straight tubes from scaling, tube wall thinning, and structural damage caused by hot combustion gases or ash-laden flows. Its high silicon content improves oxidation resistance and inhibits the formation of brittle scales, while the alloy’s high-temperature stability ensures long service life under cyclic heating and cooling operations. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of 1Cr25Ni20Si2 Half Round Straight Tube Shields, offering precise fit and durable tube protection across thermal and petrochemical industries. Material Grade 1Cr25Ni20Si2 – High-chromium, high-nickel heat-resistant alloy with enhanced silicon for improved oxidation and thermal shock resistance. Chemical Composition of 1Cr25Ni20Si2 • Carbon (C): ≤ 0.10% • Silicon (Si): 1.50 – 2.50% • Manganese (Mn): ≤ 1.50% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.030% • Chromium (Cr): 24.0 – 26.0% • Nickel (Ni): 19.0 – 22.0% • Iron (Fe): Balance Uses • Radiant section protection in waste heat boilers and reformers • Straight tube shielding in high-temperature furnaces • Heat recovery units in ammonia, hydrogen, and methanol plants • Erosion control in fluidized bed combustion systems Features • Excellent oxidation and scaling resistance at high temperatures • High thermal stability under long-term service • Superior resistance to carburization and sulfidation • Durable against erosion from high-velocity gas and ash • Maintains mechanical integrity under thermal shock • Custom-fabricated to match tube size, radius, and operational needs Applications • petrochemical and fertilizer plants – For reformer and convection section protection • power generation – In boilers, WHRBs, and waste incinerators • thermal process systems – For furnace and heat exchanger tube shielding • hydrogen and ammonia production – Suitable for synthesis gas environments • metallurgy – For steel reheating furnaces and heat treatment zones Conclusion 1Cr25Ni20Si2 Half Round Straight Tube Shields from Ladhani Metal Corporation are engineered for performance in the harshest high-temperature environments. Their robust composition and resistance to thermal and chemical degradation make them essential for extending the life of straight tubes exposed to extreme flue gas conditions. For orders, custom fabrication, and technical support, contact Ladhani Metal Corporation. #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Salem #Erode #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Hassan #Cuttack #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Gaya #Muzaffarpur #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier #SSShielding #IndustrialTubeShield #BoilerTubeGuard #CustomMetalParts #SteelIndustryIndia #MetalEngineering #HeavyIndustrySupply #StainlessSteelIndia #SteelExporters #MetalComponentExport #FabricatedProducts #SteelDealer #IndustrialSupplyIndia #BoilerTubeFittings #TubeShieldingSolutions #HalfTubeCover #HeatExchangerShield #halftubeshield #utypehalftubeshield #tubeshieldexporter

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are protective components designed to guard heat exchanger coils, boiler tubes, and superheater assemblies from erosion, high-temperature scaling, slag accumulation, and corrosion. These shields are vital in high-performance industrial systems, including power plants, refineries, and chemical process units. Their half-round shape allows easy installation on both straight and curved tubes, improving system longevity while minimizing downtime and maintenance frequency. 1Cr20Ni14Si2 U Type Inner Half Round Tube Shield The 1Cr20Ni14Si2 U Type Inner Half Round Tube Shield is manufactured using a high-temperature austenitic stainless steel alloy with enhanced chromium, nickel, and silicon content. This alloy delivers excellent oxidation resistance, thermal fatigue resistance, and structural stability at elevated temperatures. The inner U-type configuration is tailored to cover the inner arc of U-bend tubes, offering critical protection where high-velocity gas, turbulence, and slag deposits can rapidly wear or degrade tube surfaces. • Inner U Type Half Round Tube Shield – Designed to protect the inner curvature of U-bend tubes from scaling, erosion, and heat-related damage in thermal systems. Ladhani Metal Corporation is a leading manufacturer, supplier, and exporter of 1Cr20Ni14Si2 U Type Inner Half Round Tube Shields, delivering high-performance shielding solutions for demanding high-temperature environments. Chemical Composition of 1Cr20Ni14Si2 – High Chromium-Nickel-Silicon Heat-Resistant Alloy • Carbon (C): ≤ 0.20% • Manganese (Mn): ≤ 1.50% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.030% • Silicon (Si): 1.80 – 2.50% • Chromium (Cr): 19.0 – 21.0% • Nickel (Ni): 13.0 – 15.0% • Iron (Fe): Balance Applications: Ideal for continuous high-temperature operations involving oxidizing or sulfur-containing gases. Well-suited for applications requiring excellent heat resistance and minimal thermal deformation. Uses • Shields inner arcs of U-bend tubes in boilers and superheaters operating at elevated temperatures • Installed in WHRBs and HRSGs to prevent scaling, slag, and erosion in internal tube bends • Used in curved coils in reformers and process heaters exposed to hot gas and thermal cycling • Protects tube bends in chemical reactors, incinerators, and industrial furnaces from oxidation and surface degradation • Effective in systems where stability at high temperatures and resistance to carburizing and sulfidizing environments are essential Features • Excellent high-temperature performance – Withstands long-term exposure to temperatures exceeding 1000°C • Inner arc coverage – Precisely shields erosion-prone internal tube bends in critical heat transfer zones • Superior oxidation and scaling resistance – Resists corrosion in aggressive combustion gas atmospheres • Custom-fit design – Fabricated according to specified tube radii and diameters for optimal coverage and secure fit • Quick and secure installation – Compatible with clamping, banding, or tack welding methods • Long operational life – Reduces the frequency of tube failures, improving reliability and plant efficiency Applications • power plants – Installed on U-bend tubes in superheaters and reheaters facing continuous high-temperature service • petrochemical plants – Protects inner arcs of tubes in reformers and gas processing heat exchangers • waste heat recovery – Shields return bends in WHRBs and HRSGs exposed to hot flue gas and slag • thermal processing – Applied in furnaces and incinerators where hot combustion gases affect internal tube surfaces • chemical industry – Guards against oxidizing and corrosive gas damage in curved tube sections of reactors Conclusion The 1Cr20Ni14Si2 U Type Inner Half Round Tube Shield by Ladhani Metal Corporation – manufacturer, supplier, and exporter – is a robust and heat-resistant solution for protecting U-bend tubes in high-temperature and chemically aggressive conditions. Its high alloy composition, excellent thermal resistance, and customized fitment make it ideal for enhancing tube performance and reliability in critical thermal systems. For technical specifications, customized fabrication, or quotations, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are essential components used to protect heat exchanger tubes, boiler coils, and superheater assemblies from erosion, scaling, slag buildup, and high-temperature corrosion. Designed with a semi-cylindrical profile, they offer easy installation over straight or curved tube surfaces. These shields play a vital role in increasing service life, reducing tube maintenance, and ensuring the efficient operation of thermal systems across power generation, chemical processing, and petrochemical industries. 1Cr25Ni20Si2 U Type Inner Half Round Tube Shield The 1Cr25Ni20Si2 U Type Inner Half Round Tube Shield is fabricated from a high-temperature resistant chromium-nickel-silicon alloy steel. This grade offers excellent resistance to oxidation, sulfur corrosion, and thermal fatigue, even under prolonged exposure to temperatures above 1000°C. The inner U-type configuration is specifically designed to shield the internal curvature of U-bend tubes, a zone vulnerable to accelerated wear caused by flue gas turbulence, slag impact, and thermal cycling. • Inner U Type Half Round Tube Shield – Designed to cover the inside arc of U-bend tubes, offering protection from erosion, scale formation, and heat stress. Ladhani Metal Corporation is a reliable manufacturer, supplier, and exporter of 1Cr25Ni20Si2 U Type Inner Half Round Tube Shields, providing high-performance protective solutions for extreme temperature and chemically aggressive environments. Chemical Composition of 1Cr25Ni20Si2 – High Temperature Alloy Steel • Carbon (C): ≤ 0.20% • Manganese (Mn): ≤ 1.50% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.030% • Silicon (Si): 1.80 – 2.50% • Chromium (Cr): 24.0 – 26.0% • Nickel (Ni): 19.0 – 22.0% • Iron (Fe): Balance Applications: Suited for high-temperature environments with oxidizing, sulfurizing, or carburizing gases. Especially effective in boiler, furnace, and WHRB systems operating under cyclic thermal conditions. Uses • Installed on the inner arc of U-bend tubes in power plant boilers and superheaters exposed to slag and thermal stress • Protects curved tube bends in WHRBs, HRSGs, and reformers subjected to flue gas erosion and oxidation • Applied in heat exchangers and reactors operating in high-temperature and chemically active atmospheres • Used in furnace coils, metallurgical plants, and incinerators for protection from sulfur-laden and high-heat gas streams • Suitable for curved tube coils in petrochemical and process industries where scaling and corrosion are common Features • Excellent oxidation resistance – Performs effectively at continuous service temperatures up to 1100°C • Superior inner arc protection – Covers high-wear zones exposed to heat, slag, and turbulent gas flow • Enhanced thermal fatigue resistance – Designed for use in cyclic heating environments without distortion • Corrosion resistance – Withstands acid gases and sulfur-rich flue gases common in industrial combustion systems • Precision fitment – Fabricated to match specific tube sizes and bend radii for optimal protection and stability • Easy installation – Can be fixed using clamping, tack welding, or banding methods depending on system design Applications • power generation – Shields inner U-bend tubes in superheaters and reheaters from high-temperature erosion • waste heat recovery – Used in WHRBs and HRSGs to protect internal arcs against scaling and oxidation • petrochemical processing – Protects U-bend tubes in reformers and exchangers exposed to acidic gas streams • chemical industry – Ensures long-lasting performance in reactors and thermal processing equipment • metallurgical and furnace systems – Applied where high heat and slag exposure are routine Conclusion The 1Cr25Ni20Si2 U Type Inner Half Round Tube Shield by Ladhani Metal Corporation – manufacturer, supplier, and exporter – provides high-strength, heat-resistant shielding for the internal arcs of U-bend tubes operating in severe industrial environments. Its resistance to oxidation, corrosion, and thermal fatigue makes it a dependable solution for extending equipment life and performance under extreme conditions. For custom sizes, technical support, or pricing inquiries, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are high-performance protective components engineered to safeguard boiler tubes, heat exchanger coils, and superheaters from erosion, thermal fatigue, scaling, and corrosion. Widely used in thermal power plants, petrochemical units, and process heating systems, these shields offer reliable surface protection in extreme environments. Their half-round design allows quick installation over both curved and straight tube sections, extending tube life and minimizing maintenance requirements. Cr25Ni20 U Type Inner Half Round Tube Shield The Cr25Ni20 U Type Inner Half Round Tube Shield is made from a high-alloy chromium-nickel austenitic stainless steel that offers outstanding resistance to oxidation, carburization, and high-temperature corrosion. This alloy is well suited for environments involving thermal cycling and chemically aggressive gases. The inner U-type configuration is specifically designed to protect the inside curvature of U-bend tubes—where gas turbulence, thermal stress, and slag accumulation can lead to premature wear and damage. • Inner U Type Half Round Tube Shield – Designed to guard the inner arc of U-bend tubes against erosion, scaling, and oxidation under high thermal loads and gas flow impact. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of Cr25Ni20 U Type Inner Half Round Tube Shields, delivering precision-engineered solutions for demanding heat and corrosion environments. Chemical Composition of Cr25Ni20 – High Chromium-Nickel Austenitic Alloy • Carbon (C): ≤ 0.20% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.040% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.50% • Chromium (Cr): 24.0 – 26.0% • Nickel (Ni): 19.0 – 22.0% • Iron (Fe): Balance Applications: Ideal for high-temperature applications involving oxidizing, carburizing, or sulfidizing gases, where mechanical and chemical durability is critical. Uses • Shields inner arcs of U-bend tubes in boilers and superheaters exposed to oxidizing combustion gases • Protects return bends in waste heat recovery boilers (WHRBs) and heat recovery steam generators (HRSGs) • Applied in curved tubes in reformers, incinerators, and heat exchangers operating above 900°C • Used in chemical and petrochemical systems with chloride- or sulfur-laden atmospheres • Suitable for tube protection in high-temperature furnaces and metallurgical processes Features • Excellent high-temperature oxidation resistance – Performs reliably at sustained service temperatures up to 1150°C • Inner arc protection – Focused shielding of the bend area most affected by thermal cycling and gas turbulence • Corrosion and scaling resistance – Maintains integrity in aggressive chemical and flue gas environments • Precision engineering – Custom-manufactured to match specific tube diameter and bend geometry • Easy to install – Compatible with clamp-on, tack welding, or stainless steel banding • Durable and long-lasting – Reduces frequency of tube failures and downtime in critical systems Applications • power generation – Used in superheater U-bends where inner arcs are exposed to extreme thermal loads • petrochemical and fertilizer plants – Shields inner return bends in steam reformers and reactors • waste heat recovery – Installed in WHRBs and HRSGs to prevent scaling and oxidation on inner bend surfaces • chemical process industry – Protects U-bend tubes from acid vapors, hot gases, and corrosion • metallurgical industry – Ideal for inner arc protection in high-temperature treatment furnaces Conclusion The Cr25Ni20 U Type Inner Half Round Tube Shield by Ladhani Metal Corporation – manufacturer, supplier, and exporter – offers robust protection for U-bend tubes operating in high-temperature and corrosive environments. Its exceptional resistance to oxidation and thermal damage makes it ideal for critical industrial systems requiring long-lasting performance and reliability. For detailed specifications, custom fabrication, or quotations, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are precisely engineered components used to safeguard boiler tubes, superheaters, and heat exchanger coils from erosion, scaling, thermal stress, and high-temperature corrosion. Their half-round construction enables quick and secure installation over straight or curved tube surfaces, offering long-term protection and minimizing maintenance in industrial heating systems, power plants, and petrochemical facilities. 1Cr18Ni9Ti U Type Inner Half Round Tube Shield The 1Cr18Ni9Ti U Type Inner Half Round Tube Shield is manufactured from a titanium-stabilized austenitic stainless steel grade, offering superior resistance to intergranular corrosion and oxidation at elevated temperatures. This grade is particularly effective in welded applications and thermal systems subjected to cycling and corrosive media. The inner U-type configuration is designed to shield the inside curvature of U-bend tubes, where turbulent gas flow, slag, and thermal concentration often cause accelerated wear and scaling. • Inner U Type Half Round Tube Shield – Designed to protect the internal arc of U-bend tubes from high-temperature scaling, slag impact, and turbulent gas erosion. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of 1Cr18Ni9Ti U Type Inner Half Round Tube Shields, offering durable, high-performance shielding solutions for critical thermal systems. Chemical Composition of 1Cr18Ni9Ti – Titanium-Stabilized Austenitic Stainless Steel • Carbon (C): ≤ 0.12% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 17.0 – 19.0% • Nickel (Ni): 8.0 – 11.0% • Titanium (Ti): Stabilized as required • Iron (Fe): Balance Applications: Ideal for welded and high-temperature systems exposed to oxidation, intergranular corrosion, and chloride-bearing flue gases. Uses • Protects inner arcs of U-bend tubes in superheaters and reheaters of thermal power plants • Installed in return bends of waste heat recovery boilers (WHRBs) and HRSGs facing slag and scale accumulation • Applied in curved tube sections in chemical reactors and heat exchangers exposed to acidic or oxidizing gases • Suitable for marine and coastal heating systems where chlorides and moisture are present • Used in food processing, metallurgical furnaces, and process plants requiring stable, high-temperature performance Features • Excellent intergranular corrosion resistance – Stabilized with titanium to prevent carbide precipitation • Inner arc protection – Shields high-stress areas from gas turbulence and heat-induced damage • High-temperature performance – Reliable up to 870°C in oxidizing environments • Custom fit – Fabricated to match specific tube diameters and bend radii for precise installation • Easy to install – Suitable for clamp-on, weld-on, or banding methods • Long service life – Reduces frequency of tube replacement and supports consistent thermal performance Applications • thermal power generation – Inner arc protection in U-bend tubes exposed to combustion gases and temperature fluctuations • petrochemical and fertilizer plants – Shields tube bends in reactors and reformers exposed to acidic gases • waste heat recovery – Guards inner surfaces of tube coils in WHRBs and HRSGs from scaling and corrosion • marine heat exchangers – Suitable for use in systems exposed to saltwater vapors and high humidity • industrial furnaces and incinerators – Provides internal bend protection under severe thermal cycling Conclusion The 1Cr18Ni9Ti U Type Inner Half Round Tube Shield by Ladhani Metal Corporation – manufacturer, supplier, and exporter – delivers robust and reliable protection for U-bend tubes operating in corrosive and high-temperature environments. With titanium stabilization and a custom-engineered fit, this shield ensures extended tube life, reduced wear, and optimized performance in industrial heating systems. For technical assistance, custom specifications, or quotations, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are designed to protect heat exchanger tubes, boiler coils, and superheater assemblies from erosion, scaling, and surface degradation in high-temperature and corrosive environments. These shields are used extensively in power plants, chemical processing units, and industrial heating systems. Their half-round construction enables fast and secure installation over both straight and curved tube surfaces, providing an effective barrier against damage from flue gas, slag, and particulate impact. SS 430 U Type Inner Half Round Tube Shield The SS 430 U Type Inner Half Round Tube Shield is manufactured from ferritic stainless steel grade 430, known for its good corrosion resistance, excellent thermal conductivity, and oxidation resistance. It performs reliably in moderate-temperature applications and provides dependable protection against scaling and surface deterioration. The inner U-type configuration is specifically engineered to cover the inside arc of U-bend tubes, which are particularly vulnerable to high-velocity gas flow and localized heat concentration. • Inner U Type Half Round Tube Shield – Covers the internal curvature of U-bend tubes to guard against turbulence-driven erosion, slag buildup, and scaling in thermal systems. Ladhani Metal Corporation is a leading manufacturer, supplier, and exporter of SS 430 U Type Inner Half Round Tube Shields, offering reliable protection components for heat-exposed industrial systems. Chemical Composition of SS 430 – Ferritic Stainless Steel • Carbon (C): ≤ 0.12% • Manganese (Mn): ≤ 1.00% • Phosphorus (P): ≤ 0.040% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 16.0 – 18.0% • Nickel (Ni): ≤ 0.75% • Iron (Fe): Balance Applications: Suitable for moderately corrosive and oxidizing environments where high thermal conductivity and scaling resistance are required, especially in non-welded systems. Uses • Installed on inner arc of U-bend tubes in boiler and superheater coils subject to flue gas turbulence • Protects return bends in WHRBs and HRSGs from surface degradation and slag impact • Used in heat exchangers and process heaters with moderate corrosion and temperature exposure • Applied in thermal processing plants, food-grade heating systems, and chemical units • Effective for curved coil protection in dryers, economizers, and incinerator heat recovery sections Features • Good corrosion and oxidation resistance – Performs well in moderately aggressive environments • Inner arc coverage – Specifically shields areas affected by heat, scale, and turbulent flow • Cost-effective – Offers a balance between performance and affordability for general-purpose applications • Thermal stability – Maintains structural integrity at service temperatures up to 815°C • Custom-fabricated – Tailored to match specific tube bend radius and outer diameter for secure fit • Easy installation – Compatible with clamp-on, banding, or weld-on mounting for fast and efficient assembly Applications • power generation – Used in superheater and economizer return bends to prevent scale and erosion • chemical and food industry – Applied in heat recovery systems requiring corrosion-resistant inner arc protection • waste heat recovery – Installed in WHRB and HRSG curved tubes to reduce slag and flue gas impact • dryers and kilns – Shields inner U-bend tubes in rotating or stationary heating equipment • process heating units – Provides mechanical and thermal protection for tubes exposed to oxidizing gas streams Conclusion The SS 430 U Type Inner Half Round Tube Shield by Ladhani Metal Corporation – manufacturer, supplier, and exporter – is a reliable and economical solution for protecting the inner arcs of U-bend tubes in moderately corrosive and thermal environments. With its ferritic composition, good thermal performance, and ease of installation, it is ideal for general-purpose heat system applications. For technical assistance, customized dimensions, or quotations, please contact Ladhani Metal Corporation

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are engineered to protect heat exchanger, boiler, and superheater tubes from erosion, thermal scaling, and high-temperature corrosion. These shields are widely used in power plants, petrochemical systems, and high-temperature industrial equipment where tubes are exposed to direct flame, turbulent gas flow, and particulate matter. Their half-round shape ensures easy installation over curved or straight tube surfaces, providing an effective layer of protection without the need for equipment disassembly. SS 310S U Type Inner Half Round Tube Shield The SS 310S U Type Inner Half Round Tube Shield is made from stainless steel grade 310S, a low-carbon variant of SS 310. It offers excellent resistance to oxidation and high-temperature corrosion while providing improved weldability and reduced risk of sensitization during thermal cycling. This inner U-type shield is specifically designed to cover the inside arc of U-bend tubes, an area commonly affected by accelerated wear due to turbulence, heat concentration, and gas flow deflection. • Inner U Type Half Round Tube Shield – Designed to protect the inner curvature of U-bend tubes from erosion, slag buildup, and oxidation caused by high-velocity gas flow and thermal cycling. Ladhani Metal Corporation is a recognized manufacturer, supplier, and exporter of SS 310S U Type Inner Half Round Tube Shields, providing tailored solutions for heat-exposed systems in demanding industrial environments. Chemical Composition of SS 310S – Low Carbon Austenitic Stainless Steel • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.50% • Chromium (Cr): 24.0 – 26.0% • Nickel (Ni): 19.0 – 22.0% • Iron (Fe): Balance Applications: Best suited for oxidizing and high-temperature environments where welded structures are used and resistance to thermal fatigue is critical. Uses • Inner arc shielding for U-bend tubes in high-temperature boilers and superheaters • Installed in the return bends of HRSGs and waste heat recovery boilers (WHRBs) • Used in curved sections of heat exchangers exposed to combustion gases and fluctuating heat • Protects tube bends in petrochemical reactors, reformers, and process furnaces • Ideal for inner arc protection in high-temperature flue gas zones and incinerator coils Features • Excellent high-temperature oxidation resistance – Effective performance in environments up to 1050°C • Low carbon content – Reduces risk of intergranular corrosion after welding or extended service • Focused protection – Shields the inner bend surface most prone to gas turbulence and scaling • Accurate fitment – Custom-fabricated to match specific tube sizes and radii for optimal coverage • Fast installation – Can be securely mounted using stainless steel clamps, bands, or welds • Reliable performance – Enhances the lifespan of U-bend tubes and minimizes maintenance in heat-affected areas Applications • power plants – Used on U-bend inner surfaces in superheaters and reheaters to resist scale and corrosion • petrochemical industry – Shields inside tube arcs in reformers and exchangers exposed to hot process gases • waste heat systems – Protects internal tube bends in WHRBs and HRSGs from slag and thermal fatigue • chemical plants – Provides corrosion protection for return bends in reactors and condensers • high-temperature industrial units – Installed in curved tube coils subjected to flame exposure and oxidizing gases Conclusion The SS 310S U Type Inner Half Round Tube Shield by Ladhani Metal Corporation – manufacturer, supplier, and exporter – is a dependable, high-temperature protective solution for shielding the inner arc of U-bend tubes. With its excellent oxidation resistance, low carbon content, and suitability for welded environments, this shield is ideal for critical systems operating under thermal stress and corrosive gas flow. For technical consultation, custom fabrication, or quotations, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are precision-fabricated protective components used to extend the life of boiler, superheater, and heat exchanger tubes exposed to extreme heat, flue gas erosion, scaling, and corrosive environments. These shields are installed on curved or straight sections of tubes, helping to prevent mechanical wear and oxidation damage while ensuring reliable performance in thermal power, petrochemical, and industrial heat recovery systems. The half-round structure offers a secure fit and easy installation, eliminating the need for system disassembly. SS 310 U Type Inner Half Round Tube Shield The SS 310 U Type Inner Half Round Tube Shield is made from high-temperature austenitic stainless steel grade 310, which contains elevated levels of chromium and nickel. This alloy provides excellent resistance to oxidation, scaling, and thermal fatigue at service temperatures up to 1100°C. The inner U-type configuration is specifically designed to shield the inner curvature of U-bend tubes, which are susceptible to accelerated degradation due to turbulence, corrosive combustion gases, and localized heat concentration. • Inner U Type Half Round Tube Shield – Covers the inside arc of U-bend tubes, offering robust protection against turbulent flow erosion, slag buildup, and high-temperature scaling. Ladhani Metal Corporation is a leading manufacturer, supplier, and exporter of SS 310 U Type Inner Half Round Tube Shields, offering custom-built solutions for high-temperature tube protection in demanding process and energy systems. Chemical Composition of SS 310 – Austenitic High-Temperature Stainless Steel • Carbon (C): ≤ 0.25% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.50% • Chromium (Cr): 24.0 – 26.0% • Nickel (Ni): 19.0 – 22.0% • Iron (Fe): Balance Applications: Ideal for high-temperature and oxidizing environments such as boilers, reformers, kilns, and heat exchangers where scaling, corrosion, and thermal stress are prevalent. Uses • Installed on inner arcs of U-bend tubes in power plant superheaters and reheaters exposed to extreme temperatures • Applied in return bends of steam reformers and heat exchangers handling oxidizing and acidic gases • Shields inner curves in waste heat recovery boilers (WHRBs) and heat recovery steam generators (HRSGs) • Used in chemical process units, incinerators, and high-temperature furnace systems • Suitable for curved tube coils in metallurgical, cement, and process gas heating applications Features • Excellent oxidation resistance – Performs at temperatures up to 1100°C without significant scaling • Inner arc protection – Guards against erosion and heat damage caused by turbulent flue gas flow • High structural stability – Maintains strength and surface integrity under thermal cycling and load conditions • Precision fit – Custom-engineered to match tube diameter and bend radius for secure, long-lasting placement • Easy installation – Can be attached using stainless bands, clamps, or tack welding methods • Extended service life – Minimizes tube replacement and reduces maintenance frequency in high-heat systems Applications • thermal and power plants – Protects U-bend tubes in superheaters from flame impingement and slag attack • petrochemical industries – Shields return bends in reformers and exchangers from high-temperature gas streams • waste heat recovery – Used in WHRBs and HRSGs to defend tube bends from scaling and erosion • high-temperature process plants – Provides inner arc coverage in systems handling oxidizing combustion byproducts • furnace systems – Installed in curved tube coils subjected to high radiant heat and thermal cycling Conclusion The SS 310 U Type Inner Half Round Tube Shield by Ladhani Metal Corporation – manufacturer, supplier, and exporter – is a high-performance shielding solution for protecting the inner bend of tubes operating under intense heat and oxidation stress. Designed for precise fitment and long-term durability, this shield is ideal for boilers, reformers, and heat exchangers in power generation, petrochemical, and industrial heating systems. For technical consultation, custom orders, or quotations, please contact Ladhani Metal Corporation.