'flat gaskets'

DIN 2576 Stainless Steel Flanges PN 10 are high-quality, slip-on flanges manufactured from corrosion-resistant stainless steel, designed for use in low to medium-pressure piping systems. Produced according to the DIN 2576 standard, these flanges offer reliable sealing, ease of installation, and long-term durability in environments involving water, steam, air, oil, and chemical fluids. The slip-on design allows the flange to slide over the pipe and be welded into place, ensuring accurate alignment and structural integrity in a wide range of industrial applications. Ladhani Metal Corporation is a recognized manufacturer and global exporter of stainless steel flanges, delivering products that meet international quality, dimensional, and performance standards. DIN 2576 flanges provide excellent mechanical strength and corrosion resistance, making them ideal for use in chemical plants, water treatment systems, and general process industries. Pressure Rating: • PN 10 (10 bar / 145 psi): Designed for systems operating under low to moderate pressure, offering dependable performance in industrial fluid and gas transport. Flange Types: • Slip-On Flanges Designed to slip over the pipe and be welded on both the inside and outside, these flanges provide easy installation and solid structural support. • Flat Face (FF) Flanges Used with flat gaskets and flat mating surfaces to ensure even gasket compression and proper load distribution, especially when joining with non-metallic components or cast iron. Stainless Steel Grades and Composition: Stainless Steel 304 (UNS S30400) Composition: • Chromium (Cr): 18.0 – 20.0% • Nickel (Ni): 8.0 – 10.5% • Carbon (C): ≤ 0.08% • Manganese (Mn), Silicon (Si), Phosphorus (P), Sulfur (S): Trace amounts • Iron (Fe): Balance Applications: 304 stainless steel offers good corrosion resistance, formability, and weldability, making it suitable for applications in food processing, water piping, and light chemical handling. Stainless Steel 316 (UNS S31600) Composition: • Chromium (Cr): 16.0 – 18.0% • Nickel (Ni): 10.0 – 14.0% • Molybdenum (Mo): 2.0 – 3.0% • Carbon (C): ≤ 0.08% • Iron (Fe): Balance Applications: 316 stainless steel is ideal for more aggressive environments, offering superior resistance to chlorides, acids, and marine exposure. Common applications include chemical plants, pharmaceutical systems, and marine piping. Stainless Steel 321 (UNS S32100) Composition: • Chromium (Cr): 17.0 – 19.0% • Nickel (Ni): 9.0 – 12.0% • Titanium (Ti): ≥ 5x(C) minimum • Carbon (C): ≤ 0.08% • Iron (Fe): Balance Applications: 321 stainless steel is stabilized with titanium to resist intergranular corrosion after welding. It is commonly used in high-temperature applications such as exhaust systems, heat exchangers, furnace parts, and thermal fluid piping in the chemical and petrochemical industries. Applications of DIN 2576 Stainless Steel Flanges: • Chemical and Petrochemical Industries Used in piping systems that handle corrosive chemicals, acids, and solvents, ensuring safe and long-lasting operation. • Water Treatment and Distribution Widely used in pipelines for potable water, wastewater, and desalination plants due to their corrosion resistance and hygienic properties. • Food and Beverage Processing Ideal for sanitary fluid handling systems, where stainless steel ensures contamination-free and easy-to-clean connections. • Marine and Offshore Applications Suitable for piping exposed to seawater and atmospheric corrosion, especially in deck and ballast systems. • General Industrial Use Used in heating systems, compressed air lines, fire protection networks, and process piping. • High-Temperature Services Grade 321 stainless steel is preferred in applications involving thermal cycling and continuous elevated temperatures, such as refinery piping and power plant components. Key Features: • Manufactured according to DIN 2576 standard • PN 10 pressure rating for low to medium-pressure systems • Excellent corrosion resistance and mechanical strength • Available in stainless steel 304, 316, 321, and other grades • Slip-on design ensures easy welding and alignment • Flat face options available for specific gasket and joint requirements • Suitable for chemical, marine, thermal, and general industrial applications • Available in customized sizes, face types, and surface finishes Conclusion: DIN 2576 Stainless Steel Flanges PN 10 from Ladhani Metal Corporation provide reliable, corrosion-resistant performance for a wide range of industrial systems operating under moderate pressure. For technical support, material selection, or custom orders, contact Ladhani Metal Corporation today. 📞 Contact Ladhani Metal Corporation Website: https://www.ladhanimetal.in/ https://www.ladhanimetal.com/ Email: info@ladhanimetals.com Request a Quote: Custom dimensions, materials, and finishes available upon request.

Product Name: Medical Titanium Bars Standard: ASTM F136/ ISO 5832-3 Material: Grade 5/Gr23 Unit Price: $25.5usd/kg- $55.5usd/kg Shape: Round Diameter: 3-350mm Length: Max 6000mm Surface: Bright Condition: Annealed Application:Medical,surgical implant(Bone nail implant, dentistry etc.) Medical titanium material has excellent corrosion resistance, elastic modulus close to natural bone, and good biocompatibility. Medical pure titanium is a single-phase structure, which can not be strengthened by heat treatment. It can be used as internal bone plate, bone screw, dental implant, etc. it can also be used as artificial skull, artificial heart valve, pacemaker and titanium alloy for radiother.

Being one of the leading organization in the market, highly involved in offering a broad range of Dished Ends as per DIN 28011 And DIN28013 to our esteemed customers. Our offered products are manufactured suing utmost quality raw material which is obtained from the authentic vendor if the supplier. Moreover, these products are accessible in different sizes and dimensions to suit the varied demands and needs of our customers.We Manufacture and Export Types Of Dishends / Endcaps / Heads ELLIPSOIDAL HEAD HEMISPHERICAL HEAD. TORISPHERICAL HEAD KLÖPPER HEAD KORBBOGEN HEAD Semi ellipsoidal head DIN28013 Flat dished heads Standard Flat dished heads Flat heads Convex Discs Plate Type Heads Diffuser Heads Cone , Bulk & Tank Vehicle Heads Weld Counstriction Special Pressed part Experienced In Making Grades Like Carbon steel,P265-GH, 16Mo3,15NiCuMoNb5, CrMo(V), Alloy steel, 10CrMo9-10,13CrMo4-5,ASME SA 387 Gr.11,Gr12,ASME SA 387 Gr.91,P355-Gh,-NH,-NL1,-NL2,ASME SA 516 Gr.60 , Gr.70,Stainless steel 1.4301,1.4307,1.4404,1.4541,1.4571,1.4539,1.4501,Stainless steel ASME SA240 304,304L,316,316l,321,321H,316Ti,904L,2205,Super Duplex 1.4462 , cr25,Nickel alloys Alloy 20,59,200,MONEL 400,INCONEL 600,601,625,INCOLOY 800,825, 825,Copper,Titanium Grade 2,Grade 5, Aluminium Test method: Impact -Test acc. to DIN EN 10045-2 Tensile test acc to DIN EN 10002-1 , ISO 6892-1 , ASTM A 370 Hot tensile test acc to DIN EN 10002-5 until 900°C Hardness Test acc. to Brinell and DIN EN ISO 6506-1 Testing of intercrystalline corrosion acc to ISO 3651-2 (A) , ASTM A 262 Pract. E X – Ray -Examination acc. to EN 1435 , ISO 5817 , ASME V Art.2 , VIII Div.1 § UW -51 UT - Ultrasonic testing acc. to EN 10160 , EN 10307 , ASME SA-578 , ASME SA-435 PT - Penetrant testing acc. to EN 571 , ASME V Art.6 , ASME VIII Div.1 App.8 MT- Magnetic particle testing acc. to EN 1291 , ASME V Art.7 , ASMEVIII Div.1 App.6 Certificate: Certificate acc. to EN 10204 - 3.1 and 3.2 from independent organization

Being one of the leading organization in the market, highly involved in offering a broad range of Dished Ends as per DIN 28011 And DIN28013 to our esteemed customers. Our offered products are manufactured suing utmost quality raw material which is obtained from the authentic vendor if the supplier. Moreover, these products are accessible in different sizes and dimensions to suit the varied demands and needs of our customers.We Manufacture and Export Types Of Dishends / Endcaps / Heads ELLIPSOIDAL HEAD HEMISPHERICAL HEAD. TORISPHERICAL HEAD KLÖPPER HEAD KORBBOGEN HEAD Semi ellipsoidal head DIN28013 Flat dished heads Standard Flat dished heads Flat heads Convex Discs Plate Type Heads Diffuser Heads Cone , Bulk & Tank Vehicle Heads Weld Counstriction Special Pressed part Experienced In Making Grades Like Carbon steel,P265-GH, 16Mo3,15NiCuMoNb5, CrMo(V), Alloy steel, 10CrMo9-10,13CrMo4-5,ASME SA 387 Gr.11,Gr12,ASME SA 387 Gr.91,P355-Gh,-NH,-NL1,-NL2,ASME SA 516 Gr.60 , Gr.70,Stainless steel 1.4301,1.4307,1.4404,1.4541,1.4571,1.4539,1.4501,Stainless steel ASME SA240 304,304L,316,316l,321,321H,316Ti,904L,2205,Super Duplex 1.4462 , cr25,Nickel alloys Alloy 20,59,200,MONEL 400,INCONEL 600,601,625,INCOLOY 800,825, 825,Copper,Titanium Grade 2,Grade 5, Aluminium Test method: Impact -Test acc. to DIN EN 10045-2 Tensile test acc to DIN EN 10002-1 , ISO 6892-1 , ASTM A 370 Hot tensile test acc to DIN EN 10002-5 until 900°C Hardness Test acc. to Brinell and DIN EN ISO 6506-1 Testing of intercrystalline corrosion acc to ISO 3651-2 (A) , ASTM A 262 Pract. E X – Ray -Examination acc. to EN 1435 , ISO 5817 , ASME V Art.2 , VIII Div.1 § UW -51 UT - Ultrasonic testing acc. to EN 10160 , EN 10307 , ASME SA-578 , ASME SA-435 PT - Penetrant testing acc. to EN 571 , ASME V Art.6 , ASME VIII Div.1 App.8 MT- Magnetic particle testing acc. to EN 1291 , ASME V Art.7 , ASMEVIII Div.1 App.6 Certificate: Certificate acc. to EN 10204 - 3.1 and 3.2 from independent organization

Being one of the leading organization in the market, highly involved in offering a broad range of Dished Ends as per DIN 28011 And DIN28013 to our esteemed customers. Our offered products are manufactured suing utmost quality raw material which is obtained from the authentic vendor if the supplier. Moreover, these products are accessible in different sizes and dimensions to suit the varied demands and needs of our customers.We Manufacture and Export Types Of Dishends / Endcaps / Heads ELLIPSOIDAL HEAD HEMISPHERICAL HEAD. TORISPHERICAL HEAD KLÖPPER HEAD KORBBOGEN HEAD Semi ellipsoidal head DIN28013 Flat dished heads Standard Flat dished heads Flat heads Convex Discs Plate Type Heads Diffuser Heads Cone , Bulk & Tank Vehicle Heads Weld Counstriction Special Pressed part Experienced In Making Grades Like Carbon steel,P265-GH, 16Mo3,15NiCuMoNb5, CrMo(V), Alloy steel, 10CrMo9-10,13CrMo4-5,ASME SA 387 Gr.11,Gr12,ASME SA 387 Gr.91,P355-Gh,-NH,-NL1,-NL2,ASME SA 516 Gr.60 , Gr.70,Stainless steel 1.4301,1.4307,1.4404,1.4541,1.4571,1.4539,1.4501,Stainless steel ASME SA240 304,304L,316,316l,321,321H,316Ti,904L,2205,Super Duplex 1.4462 , cr25,Nickel alloys Alloy 20,59,200,MONEL 400,INCONEL 600,601,625,INCOLOY 800,825, 825,Copper,Titanium Grade 2,Grade 5, Aluminium Test method: Impact -Test acc. to DIN EN 10045-2 Tensile test acc to DIN EN 10002-1 , ISO 6892-1 , ASTM A 370 Hot tensile test acc to DIN EN 10002-5 until 900°C Hardness Test acc. to Brinell and DIN EN ISO 6506-1 Testing of intercrystalline corrosion acc to ISO 3651-2 (A) , ASTM A 262 Pract. E X – Ray -Examination acc. to EN 1435 , ISO 5817 , ASME V Art.2 , VIII Div.1 § UW -51 UT - Ultrasonic testing acc. to EN 10160 , EN 10307 , ASME SA-578 , ASME SA-435 PT - Penetrant testing acc. to EN 571 , ASME V Art.6 , ASME VIII Div.1 App.8 MT- Magnetic particle testing acc. to EN 1291 , ASME V Art.7 , ASMEVIII Div.1 App.6 Certificate: Certificate acc. to EN 10204 - 3.1 and 3.2 from independent organization

Being one of the leading organization in the market, highly involved in offering a broad range of Dished Ends as per DIN 28011 And DIN28013 to our esteemed customers. Our offered products are manufactured suing utmost quality raw material which is obtained from the authentic vendor if the supplier. Moreover, these products are accessible in different sizes and dimensions to suit the varied demands and needs of our customers.We Manufacture and Export Types Of Dishends / Endcaps / Heads ELLIPSOIDAL HEAD HEMISPHERICAL HEAD. TORISPHERICAL HEAD KLÖPPER HEAD KORBBOGEN HEAD Semi ellipsoidal head DIN28013 Flat dished heads Standard Flat dished heads Flat heads Convex Discs Plate Type Heads Diffuser Heads Cone , Bulk & Tank Vehicle Heads Weld Counstriction Special Pressed part Experienced In Making Grades Like Carbon steel,P265-GH, 16Mo3,15NiCuMoNb5, CrMo(V), Alloy steel, 10CrMo9-10,13CrMo4-5,ASME SA 387 Gr.11,Gr12,ASME SA 387 Gr.91,P355-Gh,-NH,-NL1,-NL2,ASME SA 516 Gr.60 , Gr.70,Stainless steel 1.4301,1.4307,1.4404,1.4541,1.4571,1.4539,1.4501,Stainless steel ASME SA240 304,304L,316,316l,321,321H,316Ti,904L,2205,Super Duplex 1.4462 , cr25,Nickel alloys Alloy 20,59,200,MONEL 400,INCONEL 600,601,625,INCOLOY 800,825, 825,Copper,Titanium Grade 2,Grade 5, Aluminium Test method: Impact -Test acc. to DIN EN 10045-2 Tensile test acc to DIN EN 10002-1 , ISO 6892-1 , ASTM A 370 Hot tensile test acc to DIN EN 10002-5 until 900°C Hardness Test acc. to Brinell and DIN EN ISO 6506-1 Testing of intercrystalline corrosion acc to ISO 3651-2 (A) , ASTM A 262 Pract. E X – Ray -Examination acc. to EN 1435 , ISO 5817 , ASME V Art.2 , VIII Div.1 § UW -51 UT - Ultrasonic testing acc. to EN 10160 , EN 10307 , ASME SA-578 , ASME SA-435 PT - Penetrant testing acc. to EN 571 , ASME V Art.6 , ASME VIII Div.1 App.8 MT- Magnetic particle testing acc. to EN 1291 , ASME V Art.7 , ASMEVIII Div.1 App.6 Certificate: Certificate acc. to EN 10204 - 3.1 and 3.2 from independent organization

Being one of the leading organization in the market, highly involved in offering a broad range of Dished Ends as per DIN 28011 And DIN28013 to our esteemed customers. Our offered products are manufactured suing utmost quality raw material which is obtained from the authentic vendor if the supplier. Moreover, these products are accessible in different sizes and dimensions to suit the varied demands and needs of our customers.We Manufacture and Export Types Of Dishends / Endcaps / Heads ELLIPSOIDAL HEAD HEMISPHERICAL HEAD. TORISPHERICAL HEAD KLÖPPER HEAD KORBBOGEN HEAD Semi ellipsoidal head DIN28013 Flat dished heads Standard Flat dished heads Flat heads Convex Discs Plate Type Heads Diffuser Heads Cone , Bulk & Tank Vehicle Heads Weld Counstriction Special Pressed part Experienced In Making Grades Like Carbon steel,P265-GH, 16Mo3,15NiCuMoNb5, CrMo(V), Alloy steel, 10CrMo9-10,13CrMo4-5,ASME SA 387 Gr.11,Gr12,ASME SA 387 Gr.91,P355-Gh,-NH,-NL1,-NL2,ASME SA 516 Gr.60 , Gr.70,Stainless steel 1.4301,1.4307,1.4404,1.4541,1.4571,1.4539,1.4501,Stainless steel ASME SA240 304,304L,316,316l,321,321H,316Ti,904L,2205,Super Duplex 1.4462 , cr25,Nickel alloys Alloy 20,59,200,MONEL 400,INCONEL 600,601,625,INCOLOY 800,825, 825,Copper,Titanium Grade 2,Grade 5, Aluminium Test method: Impact -Test acc. to DIN EN 10045-2 Tensile test acc to DIN EN 10002-1 , ISO 6892-1 , ASTM A 370 Hot tensile test acc to DIN EN 10002-5 until 900°C Hardness Test acc. to Brinell and DIN EN ISO 6506-1 Testing of intercrystalline corrosion acc to ISO 3651-2 (A) , ASTM A 262 Pract. E X – Ray -Examination acc. to EN 1435 , ISO 5817 , ASME V Art.2 , VIII Div.1 § UW -51 UT - Ultrasonic testing acc. to EN 10160 , EN 10307 , ASME SA-578 , ASME SA-435 PT - Penetrant testing acc. to EN 571 , ASME V Art.6 , ASME VIII Div.1 App.8 MT- Magnetic particle testing acc. to EN 1291 , ASME V Art.7 , ASMEVIII Div.1 App.6 Certificate: Certificate acc. to EN 10204 - 3.1 and 3.2 from independent organization

Being one of the leading organization in the market, highly involved in offering a broad range of Dished Ends as per DIN 28011 And DIN28013 to our esteemed customers. Our offered products are manufactured suing utmost quality raw material which is obtained from the authentic vendor if the supplier. Moreover, these products are accessible in different sizes and dimensions to suit the varied demands and needs of our customers.We Manufacture and Export Types Of Dishends / Endcaps / Heads ELLIPSOIDAL HEAD HEMISPHERICAL HEAD. TORISPHERICAL HEAD KLÖPPER HEAD KORBBOGEN HEAD Semi ellipsoidal head DIN28013 Flat dished heads Standard Flat dished heads Flat heads Convex Discs Plate Type Heads Diffuser Heads Cone , Bulk & Tank Vehicle Heads Weld Counstriction Special Pressed part Experienced In Making Grades Like Carbon steel,P265-GH, 16Mo3,15NiCuMoNb5, CrMo(V), Alloy steel, 10CrMo9-10,13CrMo4-5,ASME SA 387 Gr.11,Gr12,ASME SA 387 Gr.91,P355-Gh,-NH,-NL1,-NL2,ASME SA 516 Gr.60 , Gr.70,Stainless steel 1.4301,1.4307,1.4404,1.4541,1.4571,1.4539,1.4501,Stainless steel ASME SA240 304,304L,316,316l,321,321H,316Ti,904L,2205,Super Duplex 1.4462 , cr25,Nickel alloys Alloy 20,59,200,MONEL 400,INCONEL 600,601,625,INCOLOY 800,825, 825,Copper,Titanium Grade 2,Grade 5, Aluminium Test method: Impact -Test acc. to DIN EN 10045-2 Tensile test acc to DIN EN 10002-1 , ISO 6892-1 , ASTM A 370 Hot tensile test acc to DIN EN 10002-5 until 900°C Hardness Test acc. to Brinell and DIN EN ISO 6506-1 Testing of intercrystalline corrosion acc to ISO 3651-2 (A) , ASTM A 262 Pract. E X – Ray -Examination acc. to EN 1435 , ISO 5817 , ASME V Art.2 , VIII Div.1 § UW -51 UT - Ultrasonic testing acc. to EN 10160 , EN 10307 , ASME SA-578 , ASME SA-435 PT - Penetrant testing acc. to EN 571 , ASME V Art.6 , ASME VIII Div.1 App.8 MT- Magnetic particle testing acc. to EN 1291 , ASME V Art.7 , ASMEVIII Div.1 App.6 Certificate: Certificate acc. to EN 10204 - 3.1 and 3.2 from independent organization

Being one of the leading organization in the market, highly involved in offering a broad range of Dished Ends as per DIN 28011 And DIN28013 to our esteemed customers. Our offered products are manufactured suing utmost quality raw material which is obtained from the authentic vendor if the supplier. Moreover, these products are accessible in different sizes and dimensions to suit the varied demands and needs of our customers.We Manufacture and Export Types Of Dishends / Endcaps / Heads ELLIPSOIDAL HEAD HEMISPHERICAL HEAD. TORISPHERICAL HEAD KLÖPPER HEAD KORBBOGEN HEAD Semi ellipsoidal head DIN28013 Flat dished heads Standard Flat dished heads Flat heads Convex Discs Plate Type Heads Diffuser Heads Cone , Bulk & Tank Vehicle Heads Weld Counstriction Special Pressed part Experienced In Making Grades Like Carbon steel,P265-GH, 16Mo3,15NiCuMoNb5, CrMo(V), Alloy steel, 10CrMo9-10,13CrMo4-5,ASME SA 387 Gr.11,Gr12,ASME SA 387 Gr.91,P355-Gh,-NH,-NL1,-NL2,ASME SA 516 Gr.60 , Gr.70,Stainless steel 1.4301,1.4307,1.4404,1.4541,1.4571,1.4539,1.4501,Stainless steel ASME SA240 304,304L,316,316l,321,321H,316Ti,904L,2205,Super Duplex 1.4462 , cr25,Nickel alloys Alloy 20,59,200,MONEL 400,INCONEL 600,601,625,INCOLOY 800,825, 825,Copper,Titanium Grade 2,Grade 5, Aluminium Test method: Impact -Test acc. to DIN EN 10045-2 Tensile test acc to DIN EN 10002-1 , ISO 6892-1 , ASTM A 370 Hot tensile test acc to DIN EN 10002-5 until 900°C Hardness Test acc. to Brinell and DIN EN ISO 6506-1 Testing of intercrystalline corrosion acc to ISO 3651-2 (A) , ASTM A 262 Pract. E X – Ray -Examination acc. to EN 1435 , ISO 5817 , ASME V Art.2 , VIII Div.1 § UW -51 UT - Ultrasonic testing acc. to EN 10160 , EN 10307 , ASME SA-578 , ASME SA-435 PT - Penetrant testing acc. to EN 571 , ASME V Art.6 , ASME VIII Div.1 App.8 MT- Magnetic particle testing acc. to EN 1291 , ASME V Art.7 , ASMEVIII Div.1 App.6 Certificate: Certificate acc. to EN 10204 - 3.1 and 3.2 from independent organization