Ladhani Metal Corporation is a reliable manufacturer and exporter of DIN 2565 stainless steel flanges, crafted to provide secure, leak-proof connections in low-pressure piping systems. Compliant with DIN 2565 standards, these flanges are available in PN 6 pressure rating, making them ideal for threaded pipe connections in systems that do not require welding. These stainless steel threaded flanges are particularly suited for environments requiring resistance to corrosion, cleanliness, and easy maintenance. They are widely used in water supply lines, food processing, chemical plants, marine systems, and other industrial applications. Flange Types: • Threaded (Screwed) Flanges: Designed to connect to pipes without welding by using internal threads. • Raised Face (RF) Flanges: Feature a slightly elevated sealing surface to improve gasket compression and prevent leakage. • Flat Face (FF) Flanges: Have a flat sealing surface, typically used with flat gaskets and in low-pressure systems. • Forged Threaded Flanges: Manufactured through forging for enhanced strength and structural integrity in threaded connections. • Custom-Machined Threaded Flanges: Tailored to specific dimensions or threading requirements for specialized piping setups. Available Grades and Chemical Composition: Stainless Steel 304 (UNS S30400) Carbon (C): ≤ 0.08% Manganese (Mn): ≤ 2.00% Silicon (Si): ≤ 1.00% Phosphorus (P): ≤ 0.045% Sulfur (S): ≤ 0.030% Chromium (Cr): 18.0 – 20.0% Nickel (Ni): 8.0 – 10.5% Applications: Ideal for general use in water, air, and non-aggressive environments. Stainless Steel 316 (UNS S31600) Carbon (C): ≤ 0.08% Manganese (Mn): ≤ 2.00% Silicon (Si): ≤ 1.00% Phosphorus (P): ≤ 0.045% Sulfur (S): ≤ 0.030% Chromium (Cr): 16.0 – 18.0% Nickel (Ni): 10.0 – 14.0% Molybdenum (Mo): 2.0 – 3.0% Applications: Suitable for harsh, corrosive environments such as marine, chemical, and industrial processing systems. Stainless Steel 321 (UNS S32100) Carbon (C): ≤ 0.08% Manganese (Mn): ≤ 2.00% Silicon (Si): ≤ 1.00% Phosphorus (P): ≤ 0.045% Sulfur (S): ≤ 0.030% Chromium (Cr): 17.0 – 19.0% Nickel (Ni): 9.0 – 12.0% Titanium (Ti): 5xC – 0.70% Applications: Commonly used in high-temperature applications like heat exchangers, pressure vessels, and exhaust systems. Applications: DIN 2565 stainless steel flanges with PN 6 rating are used in a variety of industries including: • Water Treatment & Distribution: Ideal for municipal water supply and wastewater systems due to their corrosion resistance and durability. • Chemical Processing: Suitable for systems where stainless steel is required to withstand aggressive chemicals. • Food & Beverage: Commonly found in sanitary pipelines, ensuring hygienic and clean connections. • Marine Industry: Used in piping systems for vessels, ensuring longevity and resistance to corrosion in saline environments. • Pharmaceuticals: Provides the necessary sanitary and non-reactive qualities required in pharmaceutical manufacturing environments. Key Features: • Manufactured according to DIN 2565 specifications. • Corrosion-resistant, ideal for a wide range of chemical and environmental conditions. • High strength and long-lasting performance in threaded piping systems. • Available in multiple grades, sizes, and pressure ratings, including PN 6, for diverse industrial applications. Conclusion: DIN 2565 stainless steel flanges from Ladhani Metal Corporation offer reliable, cost-effective, and durable solutions for various low-pressure piping systems. With options in trusted grades such as 304, 316, and 321, these flanges meet international standards for performance and reliability. Backed by precise manufacturing and rigorous quality checks, our stainless steel flanges ensure dependable performance across multiple industries. For more technical details, pricing, or bulk inquiries, feel free to contact Ladhani Metal Corporation.

Ladhani Metal Corporation delivers high-performance SS 316L Outer Half Round 90 Degree Bend Tube Shields designed to protect the outer curvature of 90-degree bends and U-bend tubes in boilers, heat exchangers, HRSGs, and steam systems. Fabricated from low-carbon austenitic stainless steel grade SS 316L, these shields provide superior resistance to corrosion, particularly in chloride-rich and acidic environments, while minimizing the risk of sensitization during welding or high-temperature service. The semi-cylindrical geometry ensures a precise fit over the outer arc of curved tubes, creating a durable shield against erosion, thermal shock, and corrosive flue gases. SS 316L shields are particularly effective in coastal, marine, and chemical plant applications where high corrosion resistance and mechanical integrity are essential. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of SS 316L Outer Half Round 90 Degree Bend Tube Shields, offering tailored shielding solutions to match your plant's design and performance specifications. SS 316L Grade Chemical Composition – Austenitic Stainless Steel • Carbon (C): ≤ 0.035% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 16.0 – 18.0% • Nickel (Ni): 10.0 – 14.0% • Molybdenum (Mo): 2.0 – 3.0% • Iron (Fe): Balance Applications: Designed for use in corrosive, high-temperature environments including power plants, refineries, WHRBs, and coastal industrial boilers. Uses • Shields 90-degree return bends in superheaters, reheaters, and marine boilers • Protection of U-bend tubes in HRSGs and flue gas ducting systems • Applied in chemical processing units exposed to chloride vapors or acidic media • Guards against ash abrasion, scaling, and soot-blower erosion Features • Enhanced corrosion resistance – Molybdenum addition improves performance in chloride and acidic environments • Low carbon content – Reduces risk of intergranular corrosion during welding • High thermal endurance – Withstands fluctuating heat loads in boiler systems • Precision fit – Custom-bent to exact tube radius for secure, gap-free installation • Flexible installation – Clamp-on, weld-on, or banded options available • Available in custom lengths, thicknesses, and bend geometries Applications • Thermal and captive power plants – Protects critical tube curves in flue gas zones • Desalination and offshore facilities – Ideal for salt-laden and humid environments • Refineries and chemical industries – Ensures durability in corrosive atmospheres • WHRBs and HRSGs – Maintains performance in cyclic temperature operations Conclusion The SS 316L Outer Half Round 90 Degree Bend Tube Shield by Ladhani Metal Corporation is an advanced protection solution for curved tubes exposed to corrosive and high-temperature conditions. With its low-carbon formulation, excellent chloride resistance, and custom fitment, this shield enhances boiler reliability, minimizes downtime, and extends tube service life. For custom sizing, material selection, or technical specifications, contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are designed to protect heat exchanger, boiler, and superheater tubes from erosion, scaling, slag deposition, and corrosion under high-temperature operating conditions. These shields are widely used in industries such as power generation, petrochemical processing, waste heat recovery, and chemical manufacturing. Their half-round structure allows for quick installation over curved or straight tube sections, providing dependable protection and extending equipment lifespan without requiring major disassembly. SS 316L U Type Inner Half Round Tube Shield The SS 316L U Type Inner Half Round Tube Shield is fabricated from low-carbon austenitic stainless steel grade 316L. It offers superior corrosion resistance, particularly in chloride-rich or acidic environments, and improved weldability with reduced risk of intergranular corrosion after welding. The inner U-type configuration is specifically engineered to shield the inner arc of U-bend tubes—an area highly vulnerable to turbulence-induced erosion, scaling, and thermal fatigue. • Inner U Type Half Round Tube Shield – Designed to protect the inner curvature of U-bend tubes from flue gas turbulence, localized corrosion, and heat-induced scaling. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of SS 316L U Type Inner Half Round Tube Shields, providing durable and customizable shielding solutions for demanding thermal and corrosive applications. Chemical Composition of SS 316L – Low Carbon Austenitic Stainless Steel • Carbon (C): ≤ 0.035% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 16.0 – 18.0% • Nickel (Ni): 10.0 – 14.0% • Molybdenum (Mo): 2.0 – 3.0% • Iron (Fe): Balance Applications: Ideal for welded systems and high-temperature environments exposed to chlorides, acidic gases, or steam, where resistance to corrosion and thermal degradation is essential. Uses • Shields inner arcs of U-bend tubes in boilers, superheaters, and reheaters operating in corrosive and high-heat zones • Installed in return bends of waste heat recovery boilers (WHRBs) and HRSGs subjected to scaling and slag formation • Used in curved tube sections of steam reformers, condensers, and marine heat exchangers • Applied in chemical and fertilizer plants with exposure to acidic, chloride-rich, or humid gases • Suitable for welded assemblies where protection against intergranular corrosion is necessary Features • Excellent corrosion resistance – Enhanced performance in acidic, chloride-laden, and high-moisture environments • Low carbon content – Minimizes risk of intergranular corrosion after welding or high-temperature service • Inner bend protection – Shields areas affected by turbulence, localized heat, and erosion • High-temperature durability – Performs reliably in oxidizing environments up to 870°C • Custom fabrication – Tailored to match specific tube diameters and bend radii for a secure, gap-free fit • Easy installation – Suitable for clamp-on, banding, or weld-on mounting without requiring full system disassembly Applications • power generation – Inner U-type shields for protecting boiler and economizer bends in thermal power stations • petrochemical facilities – Guards internal tube bends exposed to chlorides and hot process gases in reformers • waste heat recovery systems – Applied to WHRBs and HRSGs for inner arc protection from flue gas scaling • chemical processing units – Used in reactors and exchanger coils to resist chemical and thermal corrosion • marine and offshore systems – Ensures long-term durability of U-bends exposed to saltwater-laden environments Conclusion The SS 316L U Type Inner Half Round Tube Shield by Ladhani Metal Corporation – manufacturer, supplier, and exporter – is a reliable and corrosion-resistant protective component designed for inner arc shielding in U-bend tubes operating under harsh thermal and chemical conditions. With its superior weldability, resistance to pitting, and high-temperature strength, it is ideal for critical service in energy, chemical, and marine applications. For technical support, custom specifications, or quotations, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are precision-crafted protective components used to shield boiler and heat exchanger tubes from high-temperature oxidation, slag accumulation, erosion, and thermal fatigue. These shields are essential in industrial systems where tubes are exposed to flue gases, particulate flow, and repeated heating cycles. Their half-round design enables efficient and secure installation over straight or curved tube sections, significantly extending tube life and reducing maintenance frequency. 1Cr25Ni20Si2 U Type Outer Half Round Tube Shield The 1Cr25Ni20Si2 U Type Outer Half Round Tube Shield is manufactured from a high-temperature resistant austenitic alloy containing 25% chromium, 20% nickel, and 2% silicon. This combination offers excellent oxidation resistance, strong thermal stability, and enhanced anti-scaling performance at elevated temperatures. Designed specifically to cover the outer arc of U-bend tubes, this shield protects surfaces most exposed to hot gases, flame impingement, and corrosive particles in demanding thermal environments. • Outer U Type Half Round Tube Shield – Protects the external arc of U-bend tubes from direct exposure to slag, high-velocity flue gas, and oxidizing atmospheres. Ladhani Metal Corporation is a reputed manufacturer, supplier, and exporter of 1Cr25Ni20Si2 U Type Outer Half Round Tube Shields, offering durable and heat-resistant solutions for thermal, petrochemical, and metallurgical applications. Chemical Composition of 1Cr25Ni20Si2 – Austenitic Heat-Resistant Alloy • Carbon (C): ≤ 0.10% • Manganese (Mn): ≤ 1.50% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.030% • Silicon (Si): 1.50 – 2.50% • Chromium (Cr): 24.0 – 26.0% • Nickel (Ni): 19.0 – 22.0% • Iron (Fe): Balance Applications: Best suited for environments requiring resistance to oxidation, thermal cycling, and high-temperature corrosion, especially in furnaces and exhaust systems. Uses • Outer arc protection of U-bend tubes in reheaters and superheaters exposed to slag, flame, and flue gas in power plants • Shielding external curves of return bends in waste heat recovery units (WHRBs) and HRSGs • Applied in radiant coils and heat exchanger bends operating in high-temperature industrial furnaces • Suitable for petrochemical processing units, steam reformers, and chemical heaters handling oxidizing or carburizing gases • Ideal for high-heat metallurgical and cement kiln systems requiring thermal fatigue and scale resistance Features • Excellent high-temperature oxidation resistance – High chromium and silicon content forms a stable protective scale layer • Enhanced anti-scaling performance – Withstands prolonged exposure to oxidizing environments up to 1150°C • Outer bend protection – Shields the most exposed section of U-bend tubes from erosion, slag, and thermal impact • Precision fitment – Custom-made to match tube radius and diameter for secure, rattle-free installation • Easy to install – Secured by clamps, stainless steel bands, or tack welding without disassembling the system • Long operational lifespan – Reduces tube wear and replacement frequency in aggressive thermal service conditions Applications • power generation – Used on U-bend outer arcs in superheaters and reheaters for oxidation and slag protection • petrochemical plants – Shields tube bends in reformers and high-temperature heaters exposed to process gas erosion • waste heat recovery boilers – Installed in WHRBs and HRSGs operating under fluctuating temperatures and gas flow • cement and metallurgy industries – Protects curved tubes and heat exchanger bends exposed to high-temperature dust and gas streams • furnace and incineration systems – Applied to outer arcs in radiant coils subjected to direct flame and extreme heat Conclusion The 1Cr25Ni20Si2 U Type Outer Half Round Tube Shield by Ladhani Metal Corporation—manufacturer, supplier, and exporter—is a high-performance shielding component designed for the most demanding high-temperature industrial environments. With its superior oxidation resistance, scale protection, and thermal fatigue strength, it provides lasting protection to U-bend tubes in boilers, furnaces, and heat exchangers across the power, petrochemical, and metallurgical sectors. For technical consultation, custom orders, or quotations, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are precision-manufactured components designed to protect boiler and heat exchanger tubes from erosion, scaling, slag deposition, and high-temperature corrosion. These shields are essential for ensuring the longevity of tubes in power plants, petrochemical units, and high-heat industrial systems where tubes are subjected to direct flame, abrasive particles, and corrosive gases. Their half-round form enables easy and secure installation over curved or straight tube sections. Cr25Ni20 U Type Outer Half Round Tube Shield The Cr25Ni20 U Type Outer Half Round Tube Shield is fabricated from a high-alloy austenitic stainless steel containing approximately 25% chromium and 20% nickel. This alloy offers exceptional oxidation resistance, thermal stability, and resistance to carburization and sulfidation at elevated temperatures. The outer U-type shield is specifically designed to cover the external arc of U-bend tubes in superheaters, reheaters, and reformers, where they are exposed to intense heat and reactive flue gases. • Outer U Type Half Round Tube Shield – Provides robust coverage to the outer curvature of U-bend tubes, protecting against flame impingement, slag erosion, and high-temperature corrosion. Ladhani Metal Corporation is a leading manufacturer, supplier, and exporter of Cr25Ni20 U Type Outer Half Round Tube Shields, delivering high-performance tube protection for the most demanding thermal and chemical environments. Chemical Composition of Cr25Ni20 – High-Temperature Austenitic Stainless Steel • Carbon (C): ≤ 0.10% • Manganese (Mn): ≤ 1.50% • Phosphorus (P): ≤ 0.040% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 2.00% • Chromium (Cr): 24.0 – 26.0% • Nickel (Ni): 19.0 – 22.0% • Iron (Fe): Balance Applications: Ideal for extreme heat environments and oxidizing atmospheres such as furnaces, boilers, and process heaters requiring excellent scale resistance and thermal strength. Uses • Outer arc shielding of U-bend tubes in superheaters and reheaters in high-temperature thermal power plants • Protection of external bends in petrochemical heat exchangers and reformers exposed to high-temperature process gases • Coverage for U-bend tubes in waste heat recovery boilers and HRSGs operating under oxidizing and carburizing gas flows • Applied in radiant coils and return bends in industrial furnaces and incinerators exposed to direct flame and slag • Suitable for chemical and gas processing applications where metal surfaces face extreme temperature and thermal fatigue Features • Exceptional high-temperature performance – Resists scaling, oxidation, and deformation at temperatures above 1100°C • Superior corrosion resistance – High chromium and nickel content provide defense against aggressive gas attacks • Targeted outer arc protection – Guards the most exposed section of U-bend tubes from slag, heat, and particulate damage • Precision engineered – Manufactured to custom tube diameter and radius for tight and vibration-free installation • Easy installation – Designed for quick mounting using clamps, tack welds, or stainless steel banding • Long-term durability – Reduces tube replacement frequency and enhances system efficiency in harsh operating conditions Applications • thermal and captive power plants – Installed on outer arcs of U-bend tubes in boilers, superheaters, and reheaters • petrochemical and refinery systems – Shields tubes in steam reformers and process heaters subjected to extreme temperatures • waste heat recovery boilers – Protects tube bends in HRSGs and WHRBs from scale, oxidation, and thermal fatigue • metallurgical and cement industries – Applied in radiant tubes and hot gas ducts exposed to slag, dust, and intense flame • high-temperature chemical plants – Used in reactors and cracking units where resistance to carburizing and oxidizing gases is essential Conclusion The Cr25Ni20 U Type Outer Half Round Tube Shield by Ladhani Metal Corporation—manufacturer, supplier, and exporter—is a high-performance protective component for U-bend tubes exposed to severe thermal and chemical stresses. With outstanding heat resistance, oxidation protection, and structural integrity, it ensures long-term tube life and efficient performance in boilers, heat exchangers, and reformers across thermal, petrochemical, and industrial sectors. For technical consultation, custom orders, or quotations, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are precision-engineered protective components designed to guard boiler and heat exchanger tubes from erosion, slag buildup, scaling, and high-temperature corrosion. These shields are widely used in power plants, petrochemical units, and thermal systems where tubes are exposed to hot gases, mechanical wear, and corrosive media. Their half-round structure ensures a secure fit over straight or curved tube sections, extending operational life and reducing tube failure. 1Cr18Ni9Ti U Type Outer Half Round Tube Shield The 1Cr18Ni9Ti U Type Outer Half Round Tube Shield is manufactured using a titanium-stabilized austenitic stainless steel known for its excellent corrosion resistance, high-temperature performance, and resistance to intergranular corrosion. This outer U-type shield is specifically designed to protect the external arc of U-bend tubes in boilers, heat exchangers, and superheaters where surface exposure to oxidizing gases and abrasive particles is common. Titanium stabilization improves weldability and structural integrity in high-temperature environments. • Outer U Type Half Round Tube Shield – Shields the outer curve of U-bend tubes from direct flame impingement, gas flow erosion, slag accumulation, and high-heat oxidation. Ladhani Metal Corporation is a reputable manufacturer, supplier, and exporter of 1Cr18Ni9Ti U Type Outer Half Round Tube Shields, offering durable and thermally stable solutions for critical industrial systems. Chemical Composition of 1Cr18Ni9Ti – Titanium-Stabilized Austenitic Stainless Steel • Carbon (C): ≤ 0.12% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 17.0 – 19.0% • Nickel (Ni): 8.0 – 11.0% • Titanium (Ti): ≥ 5 × C content • Iron (Fe): Balance Applications: Suitable for high-temperature, oxidizing, and corrosive environments where intergranular corrosion resistance and weldability are critical. Uses • Protection of outer U-bend surfaces in superheaters and reheaters of thermal and nuclear power plants • Shielding external arcs in waste heat recovery boilers (WHRBs) and HRSGs exposed to hot flue gases and ash particles • Applied in return bends of heat exchangers and reformers handling oxidizing and sulfur-bearing gases • Suitable for marine, petrochemical, and high-pressure steam systems requiring resistance to heat-induced corrosion • Used in welded applications where post-weld corrosion resistance and long-term structural stability are necessary Features • Excellent intergranular corrosion resistance – Titanium addition stabilizes carbon, preventing carbide precipitation during welding • High-temperature strength – Maintains structural integrity and oxidation resistance up to 850–900°C • Outer U-bend protection – Shields the most exposed and vulnerable arc from flame, thermal stress, and erosion • Precision engineering – Manufactured to exact tube radii and dimensions for a secure, movement-free installation • Easy to install – Can be mounted with clamps, stainless steel bands, or tack welds without dismantling the system • Long operational life – Reduces tube wear and thermal damage, improving overall system reliability Applications • power generation – Installed in superheater and reheater return bends exposed to thermal cycling and flue gas erosion • petrochemical plants – Protects U-bend tubes in reformers and exchangers from high-temperature and chemical degradation • waste heat recovery – Used in WHRBs and HRSGs to shield against slag buildup, scale formation, and high-velocity gas impact • marine and offshore systems – Suitable for condensers and heat exchangers exposed to salt-laden, oxidizing environments • industrial furnaces – Applied to radiant coils and return bends exposed to sustained heat and direct flame Conclusion The 1Cr18Ni9Ti U Type Outer Half Round Tube Shield by Ladhani Metal Corporation—manufacturer, supplier, and exporter—is a robust and thermally stable solution for protecting U-bend tube outer arcs in high-temperature and corrosive environments. With superior resistance to intergranular corrosion, oxidation, and thermal fatigue, this shield is ideal for boilers, heat exchangers, and petrochemical equipment requiring long-term protection and reliable performance. For technical consultation, custom orders, or quotations, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are precision-engineered components used to protect heat exchanger and boiler tubes from erosion, scaling, slag buildup, and high-temperature oxidation. These shields are commonly applied in thermal and industrial systems where tubes are exposed to flue gases, particulate flow, and repeated thermal cycling. The half-round design ensures secure and efficient coverage over straight or curved tube sections, reducing maintenance needs and enhancing tube lifespan. SS 430 U Type Outer Half Round Tube Shield The SS 430 U Type Outer Half Round Tube Shield is fabricated from SS 430, a ferritic stainless steel known for its good corrosion resistance, oxidation resistance, and excellent formability. This outer U-type shield is specifically designed to protect the outer arc of U-bend tubes in boilers, heat exchangers, and recovery systems. SS 430 is highly resistant to stress corrosion cracking and scaling in mildly corrosive and high-temperature environments, making it a cost-effective solution for less aggressive service conditions. • Outer U Type Half Round Tube Shield – Shields the outer curvature of U-bend tubes against heat, slag, soot erosion, and surface oxidation from flue gases. Ladhani Metal Corporation is a reliable manufacturer, supplier, and exporter of SS 430 U Type Outer Half Round Tube Shields, offering dependable protection for boiler and exchanger tube bends in moderate-temperature industrial environments. Chemical Composition of SS 430 – Ferritic Stainless Steel • Carbon (C): ≤ 0.12% • Manganese (Mn): ≤ 1.00% • Phosphorus (P): ≤ 0.040% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 16.0 – 18.0% • Nickel (Ni): ≤ 0.75% • Iron (Fe): Balance Applications: Ideal for moderate-temperature, mildly corrosive environments where oxidation resistance and mechanical durability are required. Uses • Outer bend protection of U-tubes in reheaters and superheaters in thermal power generation systems • Shielding of external arcs in waste heat recovery units and heat exchangers exposed to dry or clean flue gases • Coverage of U-bend tubes in utility boilers and economizers with low chloride or sulfuric gas exposure • Suitable for food processing and clean air systems requiring stable performance under elevated temperatures • Used in systems where stress corrosion cracking resistance and cost-effective shielding are priorities Features • Good corrosion and oxidation resistance – Chromium-rich alloy resists surface oxidation and rust formation at elevated temperatures • Outer arc coverage – Provides mechanical and thermal shielding for the most exposed curve of U-bend tubes • Thermal stability – Performs reliably in temperatures up to 815°C with good resistance to scaling and heat stress • Easy installation – Can be mounted using clamps, banding, or tack welding without requiring disassembly of the system • Precision fit – Custom-fabricated to fit specific tube diameters and radii, ensuring secure, movement-free installation • Economical solution – Offers dependable performance at a lower cost compared to austenitic stainless steels Applications • thermal and captive power plants – Installed on U-bend outer arcs in superheaters and economizers exposed to moderate flue gases • heat recovery systems – Shields bends in WHRB and HRSG systems operating under low-corrosive and oxidizing conditions • general industrial boilers – Protects tube surfaces from surface scaling and minor gas abrasion • process industries – Suitable for clean air and low-chloride gas systems in the food, paper, or light chemical sectors • HVAC and ventilation systems – Used in exhaust and heating systems requiring corrosion-resistant but cost-effective shielding Conclusion The SS 430 U Type Outer Half Round Tube Shield by Ladhani Metal Corporation—manufacturer, supplier, and exporter—is a cost-effective and reliable protective component for U-bend tube outer surfaces in industrial systems. With good oxidation resistance, structural integrity under moderate heat, and easy installation, it is ideal for power plants, recovery systems, and clean process industries where durable but economical shielding is required. For technical consultation, custom orders, or quotations, please contact Ladhani Metal Corporation

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are precision-engineered components used to protect boiler and heat exchanger tubes from erosion, scaling, and high-temperature corrosion. These shields are widely applied in industrial systems exposed to thermal cycling, aggressive gases, and particulate flow. Their half-round shape allows for simple and secure installation over straight or curved tube surfaces, extending tube life and reducing maintenance needs. SS 410 U Type Outer Half Round Tube Shield The SS 410 U Type Outer Half Round Tube Shield is made from SS 410, a hardenable martensitic stainless steel known for its excellent strength, toughness, and moderate corrosion resistance. This outer U-type configuration is designed to protect the external arc of U-bend tubes in heat exchangers, boilers, and reheaters where abrasive flue gases and mechanical wear are common. SS 410’s hardness and resistance to thermal fatigue make it suitable for shielding outer tube surfaces exposed to harsh industrial environments. • Outer U Type Half Round Tube Shield – Protects the outer curvature of U-bend tubes from erosion, scaling, and mechanical impact caused by high-velocity gas and slag deposits. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of SS 410 U Type Outer Half Round Tube Shields, offering durable solutions for power generation and high-temperature applications. Chemical Composition of SS 410 – Martensitic Stainless Steel • Carbon (C): 0.08 – 0.15% • Manganese (Mn): ≤ 1.00% • Phosphorus (P): ≤ 0.040% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 11.5 – 13.5% • Nickel (Ni): ≤ 0.75% • Iron (Fe): Balance Applications: Suitable for high-temperature environments with abrasive gas flow and mechanical stress, where moderate corrosion resistance is sufficient. Uses • Outer arc protection for U-bend tubes in boilers, superheaters, and reheaters in thermal power plants • Shields tube bends in economizers and waste heat recovery systems from flue gas erosion • Applied in return bends in gas processing heaters and exhaust systems subjected to particulate flow • Ideal for high-strength, mechanically demanding environments where wear resistance is critical • Used in utility boilers, process furnaces, and other industrial systems operating under moderate corrosion and high heat conditions Features • High mechanical strength – Martensitic structure provides excellent hardness and wear resistance for abrasive service conditions • Moderate corrosion resistance – Chromium content offers basic protection against oxidation and steam exposure • Outer bend coverage – Shields the most exposed and impact-prone arc of the U-bend tube • Precision fit – Custom-fabricated to match tube diameters and bend radii, ensuring tight, vibration-free installation • Easy to install – Mountable using stainless steel bands, clamps, or tack welds without dismantling the system • Cost-effective – Offers durable tube protection with high strength at a lower material cost compared to austenitic grades Applications • power generation – Protects outer curves of U-bend tubes in high-temperature zones of boilers and reheaters • petrochemical processing – Shields tube bends in process heaters and reformers from thermal and gas erosion • waste heat recovery – Applied in WHRBs and HRSGs to guard against slag impact and scale formation • industrial furnaces – Suitable for high-wear zones where heat and particulate flow cause surface degradation • general industry – Used in utility boilers and gas exhaust systems where mechanical protection is needed with moderate corrosion resistance Conclusion The SS 410 U Type Outer Half Round Tube Shield by Ladhani Metal Corporation—manufacturer, supplier, and exporter—is a reliable and economical solution for protecting U-bend tube outer surfaces in boilers, heat exchangers, and thermal process systems. With excellent mechanical strength, good thermal stability, and moderate corrosion resistance, it is ideal for industrial applications that demand abrasion resistance and long service life in high-temperature environments. For technical consultation, custom orders, or quotations, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are precision-engineered components used to protect boiler and heat exchanger tubes from erosion, scaling, and high-temperature corrosion. These shields are widely applied in industrial systems exposed to thermal cycling, aggressive gases, and particulate flow. Their half-round shape allows for simple and secure installation over straight or curved tube surfaces, extending tube life and reducing maintenance needs. SS 316L U Type Outer Half Round Tube Shield The SS 316L U Type Outer Half Round Tube Shield is manufactured from SS 316L, a low-carbon molybdenum-bearing austenitic stainless steel known for its superior corrosion resistance and excellent weldability. This outer U-type configuration is designed to protect the external arc of U-bend tubes in boilers, superheaters, heat exchangers, and waste heat recovery systems. The low carbon content of SS 316L reduces the risk of sensitization and intergranular corrosion, making it ideal for welded systems exposed to chlorides, acidic gases, and steam. • Outer U Type Half Round Tube Shield – Offers full coverage to the outer curvature of U-bend tubes, shielding against erosion, slag buildup, high-temperature oxidation, and chemical attack. Ladhani Metal Corporation is a leading manufacturer, supplier, and exporter of SS 316L U Type Outer Half Round Tube Shields, delivering precision-built, long-lasting solutions for demanding industrial applications. Chemical Composition of SS 316L – Low-Carbon Austenitic Stainless Steel • Carbon (C): ≤ 0.03% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 16.0 – 18.0% • Nickel (Ni): 10.0 – 14.0% • Molybdenum (Mo): 2.0 – 3.0% • Iron (Fe): Balance Applications: Suited for high-temperature and corrosive environments requiring superior resistance to chlorides, acids, and weld-induced corrosion. Uses • Protection of U-bend outer arcs in superheaters and reheaters in thermal and nuclear power stations • Shielding tube bends in chemical heat exchangers and steam reformers exposed to chlorides and acidic gases • Outer bend coverage for WHRB and HRSG tubes subjected to flue gas flow, scaling, and erosion • Applied to return bends in condensers and evaporators in marine and coastal facilities • Ideal for pharmaceutical, food processing, and clean energy systems requiring low carbon stainless steel Features • Exceptional corrosion resistance – Molybdenum addition enhances resistance to pitting, crevice corrosion, and chlorides • Low carbon content – Minimizes the risk of sensitization and intergranular corrosion after welding or high-heat exposure • High-temperature capability – Maintains performance under cyclic heating and thermal stress conditions • Precision fitment – Custom-fabricated to match tube diameter and radius, ensuring tight, vibration-free installation • Easy installation – Mountable with clamps, banding, or tack welds without requiring shutdown or disassembly • Long-term durability – Withstands corrosive gases, scaling, and erosion, extending tube life and reducing downtime Applications • thermal power plants – Protects outer arcs of U-bend tubes from flue gas erosion and scaling in high-temperature zones • chemical and petrochemical plants – Shields return bends in reformers and exchangers operating with corrosive process media • waste heat recovery systems – Provides protection in WHRBs and HRSGs from thermal fatigue and particulate-laden flue gases • marine and offshore facilities – Suitable for chloride-rich environments such as desalination plants and coastal condensers • process and pharmaceutical industries – Ensures corrosion-resistant performance in systems with stringent cleanliness and durability requirements Conclusion The SS 316L U Type Outer Half Round Tube Shield by Ladhani Metal Corporation—manufacturer, supplier, and exporter—is a corrosion-resistant, precision-engineered solution for protecting U-bend tube outer surfaces in boilers and heat exchangers. Its low carbon content, molybdenum-enhanced alloy composition, and excellent weldability make it ideal for harsh industrial environments requiring high performance and reliability. Designed for easy installation and long service life, it is a trusted choice for power, petrochemical, marine, and process applications. For technical consultation, custom orders, or quotations, please contact Ladhani Metal Corporation.