The Outer Half Round 90 Degree Bend Tube Shield is fabricated to precisely match the outer arc of 90° tube bends. Its semi-cylindrical form conforms tightly to the external curve, forming a protective barrier that resists abrasive flow and corrosive attack. These shields are typically used in superheaters, reheaters, waste heat recovery boilers (WHRBs), and HRSGs where return bends are most vulnerable. The shields are manufactured from corrosion-resistant stainless steels and heat-resistant alloys, selected based on temperature ratings and media conditions. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of Outer Half Round 90 Degree Bend Tube Shields, offering standard and custom-engineered designs for a wide variety of boiler and heat recovery applications. Available Material Grades • Stainless Steels: SS 304, 304L, 310, 310S, 316, 316L, 410, 420, 430 • Heat-Resistant Alloys: 1Cr13, 1Cr18Ni9Ti, Cr25Ni20, 1Cr25Ni20Si2, Cr23Ni13, 1Cr20Ni14Si2, Inconel 600, and more Typical Chemical Composition (example – SS 316) • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 16.0 – 18.0% • Nickel (Ni): 10.0 – 14.0% • Molybdenum (Mo): 2.0 – 3.0% • Iron (Fe): Balance Applications: Used in curved tube regions where the external surface is subjected to thermal wear, ash abrasion, and corrosive gases. Uses • Protection of 90-degree U-bends in boiler and superheater tube banks • Return bend shielding in heat exchangers and WHRBs • Safeguarding curved tubes in process heaters, HRSGs, and refinery systems • Applied in thermal, petrochemical, and chemical plant steam systems • Suitable for power generation and heavy industrial boilers Features • Form-fitting design – Precisely matches outer curvature of U-bends for tight, secure installation • Heat and corrosion resistance – Manufactured from materials designed to withstand extreme thermal and chemical environments • Durable protection – Shields critical bend zones from fly ash erosion, soot-blowing wear, and gas impingement • Reduced maintenance – Prolongs tube life and minimizes unplanned outages due to bend failure • Custom-engineered – Fabricated based on user drawings, coil geometry, and tube specifications • Flexible installation – Can be clamped, welded, or banded with minimal disassembly Applications • steam power boilers – Protects outer bend regions from accelerated erosion and high-velocity flue gases • oil and gas refineries – Used in convection section return bends to enhance tube longevity • WHRB and HRSG installations – Shields bend areas exposed to intense ash loading • fertilizer and chemical processing – Ideal for curved coils in high-temperature, corrosive environments • industrial heaters – Ensures safety and long-term performance of curved tube bundles Conclusion The Outer Half Round 90 Degree Bend Tube Shield by Ladhani Metal Corporation – manufacturer, supplier, and exporter – delivers critical protection to return bends in thermal process systems. Designed for curved tube geometry, these shields reduce erosion risk, extend tube service life, and support the reliability of high-performance boilers, reformers, and heat recovery units. For custom sizing, material selection, or technical specifications, contact Ladhani Metal Corporation. #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Salem #Erode #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Hassan #Cuttack #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Gaya #Muzaffarpur #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier #SSShielding #IndustrialTubeShield #BoilerTubeGuard #CustomMetalParts #SteelIndustryIndia #MetalEngineering #HeavyIndustrySupply #StainlessSteelIndia #SteelExporters #MetalComponent

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are precision-engineered protective components designed to guard boiler and heat exchanger tubes from erosion, slag buildup, scaling, and high-temperature corrosion. These shields are widely used in power plants, petrochemical units, and thermal systems where tubes are exposed to hot gases, mechanical wear, and corrosive media. Their half-round structure ensures a secure fit over straight or curved tube sections, extending operational life and reducing tube failure. 1Cr18Ni9Ti U Type Outer Half Round Tube Shield The 1Cr18Ni9Ti U Type Outer Half Round Tube Shield is manufactured using a titanium-stabilized austenitic stainless steel known for its excellent corrosion resistance, high-temperature performance, and resistance to intergranular corrosion. This outer U-type shield is specifically designed to protect the external arc of U-bend tubes in boilers, heat exchangers, and superheaters where surface exposure to oxidizing gases and abrasive particles is common. Titanium stabilization improves weldability and structural integrity in high-temperature environments. • Outer U Type Half Round Tube Shield – Shields the outer curve of U-bend tubes from direct flame impingement, gas flow erosion, slag accumulation, and high-heat oxidation. Ladhani Metal Corporation is a reputable manufacturer, supplier, and exporter of 1Cr18Ni9Ti U Type Outer Half Round Tube Shields, offering durable and thermally stable solutions for critical industrial systems. Chemical Composition of 1Cr18Ni9Ti – Titanium-Stabilized Austenitic Stainless Steel • Carbon (C): ≤ 0.12% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 17.0 – 19.0% • Nickel (Ni): 8.0 – 11.0% • Titanium (Ti): ≥ 5 × C content • Iron (Fe): Balance Applications: Suitable for high-temperature, oxidizing, and corrosive environments where intergranular corrosion resistance and weldability are critical. Uses • Protection of outer U-bend surfaces in superheaters and reheaters of thermal and nuclear power plants • Shielding external arcs in waste heat recovery boilers (WHRBs) and HRSGs exposed to hot flue gases and ash particles • Applied in return bends of heat exchangers and reformers handling oxidizing and sulfur-bearing gases • Suitable for marine, petrochemical, and high-pressure steam systems requiring resistance to heat-induced corrosion • Used in welded applications where post-weld corrosion resistance and long-term structural stability are necessary Features • Excellent intergranular corrosion resistance – Titanium addition stabilizes carbon, preventing carbide precipitation during welding • High-temperature strength – Maintains structural integrity and oxidation resistance up to 850–900°C • Outer U-bend protection – Shields the most exposed and vulnerable arc from flame, thermal stress, and erosion • Precision engineering – Manufactured to exact tube radii and dimensions for a secure, movement-free installation • Easy to install – Can be mounted with clamps, stainless steel bands, or tack welds without dismantling the system • Long operational life – Reduces tube wear and thermal damage, improving overall system reliability Applications • power generation – Installed in superheater and reheater return bends exposed to thermal cycling and flue gas erosion • petrochemical plants – Protects U-bend tubes in reformers and exchangers from high-temperature and chemical degradation • waste heat recovery – Used in WHRBs and HRSGs to shield against slag buildup, scale formation, and high-velocity gas impact • marine and offshore systems – Suitable for condensers and heat exchangers exposed to salt-laden, oxidizing environments • industrial furnaces – Applied to radiant coils and return bends exposed to sustained heat and direct flame Conclusion The 1Cr18Ni9Ti U Type Outer Half Round Tube Shield by Ladhani Metal Corporation—manufacturer, supplier, and exporter—is a robust and thermally stable solution for protecting U-bend tube outer arcs in high-temperature and corrosive environments. With superior resistance to intergranular corrosion, oxidation, and thermal fatigue, this shield is ideal for boilers, heat exchangers, and petrochemical equipment requiring long-term protection and reliable performance. For technical consultation, custom orders, or quotations, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are precision-engineered components used to protect boiler and heat exchanger tubes from erosion, scaling, and high-temperature corrosion. These shields are widely applied in industrial systems exposed to thermal cycling, aggressive gases, and particulate flow. Their half-round shape allows for simple and secure installation over straight or curved tube surfaces, extending tube life and reducing maintenance needs. SS 316L U Type Outer Half Round Tube Shield The SS 316L U Type Outer Half Round Tube Shield is manufactured from SS 316L, a low-carbon molybdenum-bearing austenitic stainless steel known for its superior corrosion resistance and excellent weldability. This outer U-type configuration is designed to protect the external arc of U-bend tubes in boilers, superheaters, heat exchangers, and waste heat recovery systems. The low carbon content of SS 316L reduces the risk of sensitization and intergranular corrosion, making it ideal for welded systems exposed to chlorides, acidic gases, and steam. • Outer U Type Half Round Tube Shield – Offers full coverage to the outer curvature of U-bend tubes, shielding against erosion, slag buildup, high-temperature oxidation, and chemical attack. Ladhani Metal Corporation is a leading manufacturer, supplier, and exporter of SS 316L U Type Outer Half Round Tube Shields, delivering precision-built, long-lasting solutions for demanding industrial applications. Chemical Composition of SS 316L – Low-Carbon Austenitic Stainless Steel • Carbon (C): ≤ 0.03% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 16.0 – 18.0% • Nickel (Ni): 10.0 – 14.0% • Molybdenum (Mo): 2.0 – 3.0% • Iron (Fe): Balance Applications: Suited for high-temperature and corrosive environments requiring superior resistance to chlorides, acids, and weld-induced corrosion. Uses • Protection of U-bend outer arcs in superheaters and reheaters in thermal and nuclear power stations • Shielding tube bends in chemical heat exchangers and steam reformers exposed to chlorides and acidic gases • Outer bend coverage for WHRB and HRSG tubes subjected to flue gas flow, scaling, and erosion • Applied to return bends in condensers and evaporators in marine and coastal facilities • Ideal for pharmaceutical, food processing, and clean energy systems requiring low carbon stainless steel Features • Exceptional corrosion resistance – Molybdenum addition enhances resistance to pitting, crevice corrosion, and chlorides • Low carbon content – Minimizes the risk of sensitization and intergranular corrosion after welding or high-heat exposure • High-temperature capability – Maintains performance under cyclic heating and thermal stress conditions • Precision fitment – Custom-fabricated to match tube diameter and radius, ensuring tight, vibration-free installation • Easy installation – Mountable with clamps, banding, or tack welds without requiring shutdown or disassembly • Long-term durability – Withstands corrosive gases, scaling, and erosion, extending tube life and reducing downtime Applications • thermal power plants – Protects outer arcs of U-bend tubes from flue gas erosion and scaling in high-temperature zones • chemical and petrochemical plants – Shields return bends in reformers and exchangers operating with corrosive process media • waste heat recovery systems – Provides protection in WHRBs and HRSGs from thermal fatigue and particulate-laden flue gases • marine and offshore facilities – Suitable for chloride-rich environments such as desalination plants and coastal condensers • process and pharmaceutical industries – Ensures corrosion-resistant performance in systems with stringent cleanliness and durability requirements Conclusion The SS 316L U Type Outer Half Round Tube Shield by Ladhani Metal Corporation—manufacturer, supplier, and exporter—is a corrosion-resistant, precision-engineered solution for protecting U-bend tube outer surfaces in boilers and heat exchangers. Its low carbon content, molybdenum-enhanced alloy composition, and excellent weldability make it ideal for harsh industrial environments requiring high performance and reliability. Designed for easy installation and long service life, it is a trusted choice for power, petrochemical, marine, and process applications. For technical consultation, custom orders, or quotations, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are precision-engineered components used to protect boiler and heat exchanger tubes from erosion, scaling, and high-temperature corrosion. These shields are widely applied in industrial systems exposed to thermal cycling, aggressive gases, and particulate flow. Their half-round shape allows for simple and secure installation over straight or curved tube surfaces, extending tube life and reducing maintenance needs. SS 316 U Type Outer Half Round Tube Shield The SS 316 U Type Outer Half Round Tube Shield is manufactured from SS 316, a molybdenum-bearing austenitic stainless steel known for its superior corrosion resistance, especially against chlorides, acidic media, and pitting. This outer U-type configuration is specifically designed to protect the outer curvature of U-bend tubes in boilers, superheaters, heat exchangers, and waste heat recovery systems. It offers effective shielding in high-temperature, corrosive environments where external tube surfaces are exposed to flue gases, slag accumulation, and erosion. • Outer U Type Half Round Tube Shield – Covers the external arc of U-bend tubes, guarding against flame impingement, thermal degradation, and corrosive gas attack. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of SS 316 U Type Outer Half Round Tube Shields, delivering precision solutions for demanding thermal and chemical processing applications. Chemical Composition of SS 316 – Austenitic Stainless Steel with Molybdenum • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 16.0 – 18.0% • Nickel (Ni): 10.0 – 14.0% • Molybdenum (Mo): 2.0 – 3.0% • Iron (Fe): Balance Applications: Ideal for high-temperature systems operating in corrosive environments with exposure to chlorides, acidic gases, steam, and thermal cycling. Uses • Outer arc protection of U-bend tubes in superheaters and reheaters in thermal and nuclear power plants • Shielding curved tube bends in petrochemical heat exchangers and steam reformers • Coverage for WHRB and HRSG outer U-bend sections exposed to abrasive and corrosive flue gas streams • Applied to return bends in condensers, evaporators, and marine heat exchangers exposed to saline or acidic media • Suitable for process industries requiring excellent corrosion resistance and thermal stability Features • Excellent corrosion resistance – Molybdenum-enhanced alloy provides high resistance to pitting, crevice corrosion, and chloride attack • Outer U-bend protection – Shields the most vulnerable outer curvature from erosion, heat stress, and slag impact • High-temperature durability – Maintains structural stability under continuous and cyclic heat conditions • Custom fitment – Manufactured to precisely match tube diameter and bend radius for a snug and vibration-free installation • Easy to install – Secured with clamps, tack welds, or stainless steel bands without system disassembly • Long service life – Reduces tube damage, extends maintenance intervals, and enhances operational efficiency Applications • power generation – Installed in U-bend tube outer arcs in superheaters and reheaters to prevent oxidation and surface scaling • petrochemical and refinery plants – Used in high-temperature heat exchangers and reformers exposed to corrosive process gases • waste heat recovery boilers – Shields outer tube bends from flue gas erosion and slag accumulation in WHRBs and HRSGs • chemical and fertilizer plants – Protects external surfaces of U-bends in reactors and ammonia reformers against acidic gas attack • marine and coastal installations – Ideal for heat exchangers and condensers operating in chloride-laden and saline environments Conclusion The SS 316 U Type Outer Half Round Tube Shield by Ladhani Metal Corporation—manufacturer, supplier, and exporter—is a robust and corrosion-resistant solution for protecting the outer arcs of U-bend tubes in heat exchangers, boilers, and thermal processing equipment. With superior resistance to chlorides, acids, and oxidizing gases, along with high-temperature performance and ease of installation, this shield is a dependable choice for power, petrochemical, and marine industry applications. For technical consultation, custom orders, or quotations, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are precision-engineered components used to protect boiler and heat exchanger tubes from erosion, scaling, and high-temperature corrosion. These shields are widely applied in industrial systems exposed to thermal cycling, aggressive gases, and particulate flow. Their half-round shape allows for simple and secure installation over straight or curved tube surfaces, extending tube life and reducing maintenance needs. SS 310S U Type Outer Half Round Tube Shield The SS 310S U Type Outer Half Round Tube Shield is designed using SS 310S, a low-carbon austenitic stainless steel known for its excellent resistance to oxidation, high-temperature strength, and enhanced weldability. This outer U-type shield is specifically engineered to cover and protect the outer arc of U-bend tube sections in superheaters, reheaters, waste heat recovery systems, and high-temperature heat exchangers. With its high chromium and nickel content, SS 310S provides superior performance in oxidizing and carburizing environments while maintaining structural stability during prolonged thermal cycling. • Outer U Type Half Round Tube Shield – Shields the external curvature of U-bend tubes from slag deposition, hot gas erosion, scale formation, and high-temperature fatigue. Ladhani Metal Corporation is a leading manufacturer, supplier, and exporter of SS 310S U Type Outer Half Round Tube Shields, offering high-performance solutions for critical thermal and process applications across industries. Chemical Composition of SS 310S – Low-Carbon Austenitic Stainless Steel • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.50% • Chromium (Cr): 24.0 – 26.0% • Nickel (Ni): 19.0 – 22.0% • Iron (Fe): Balance Applications: Best suited for high-temperature, oxidizing, and carburizing environments where thermal stability, scale resistance, and corrosion protection are essential. Uses • Outer surface protection of U-bend tubes in superheaters and reheaters of thermal and industrial power plants • Shielding of return bends in petrochemical reformers, process heaters, and high-temperature exchangers • Applied to outer arcs in WHRBs and HRSGs subjected to thermal cycling, slag erosion, and hot flue gas exposure • Suitable for use in chemical and gas processing units handling oxidizing or acidic exhausts at elevated temperatures • Ideal for incinerator tubes, radiant coils, and furnace bends operating under continuous or cyclic heat conditions Features • Outstanding high-temperature strength – Performs effectively up to 1150°C with excellent resistance to scaling and oxidation • Enhanced weldability – Low carbon content minimizes the risk of sensitization and intergranular corrosion after welding • Outer U-bend coverage – Designed for targeted protection where erosion and thermal impact are most severe • Precision fitment – Manufactured to exact tube radius and diameter specifications for tight, vibration-free installation • Quick installation – Easily mounted using clamps, tack welds, or stainless steel banding without system disassembly • Long-term durability – Resistant to cracking, scaling, and corrosion under thermal fatigue, reducing maintenance and downtime Applications • thermal power plants – Installed on U-bend tube outer curves in superheaters and reheaters for oxidation and erosion protection • petrochemical plants – Used in reformers and cracking furnaces exposed to high-temperature and oxidizing environments • waste heat recovery systems – Protects return bends in WHRBs and HRSGs from hot gas flow, slag buildup, and scaling • chemical and gas processing – Shields bends in high-temperature exchangers and preheaters from corrosive and oxidizing media • furnaces and industrial incinerators – Applied to radiant tubes and burner bends subjected to direct flame and thermal cycling Conclusion The SS 310S U Type Outer Half Round Tube Shield by Ladhani Metal Corporation—manufacturer, supplier, and exporter—is a premium solution for protecting U-bend tube outer arcs in boilers and heat exchangers exposed to severe heat and gas flow conditions. With excellent oxidation resistance, low carbon content for improved weldability, and precision design for long-lasting performance, this shield enhances the lifespan and reliability of thermal systems across a wide range of industrial sectors. For technical consultation, custom orders, or quotations, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are precision-formed protective sleeves designed to guard heat exchanger and boiler tubes from high-temperature corrosion, erosion, and mechanical wear. These shields are used extensively across thermal power, petrochemical, and process industries to improve tube longevity and reduce maintenance costs. Their half-round design allows easy installation without dismantling the tube system. SS 304L U Type Half Round Tube Shield The SS 304L U Type Half Round Tube Shield is designed to protect both straight and curved (U-bend) tube sections in heat exchangers, superheaters, and boilers. Made from low-carbon stainless steel 304L, this shield provides excellent corrosion resistance and is particularly suitable for applications where post-weld heat treatment is not feasible. Its U-shaped profile ensures secure coverage of return bends, which are often the most vulnerable to thermal stress and flue gas attack. This shield is available in both inner and outer configurations to ensure full tube coverage. This shield is available in two key configurations to provide complete protection around the bend radius: • Outer U Type Half Round Tube Shield – Covers the external curvature of U-bend tubes exposed to radiant heat, slag, and gas flow. • Inner U Type Half Round Tube Shield – Protects the internal arc of bends from turbulence, scaling, and localized heat buildup. Ladhani Metal Corporation is a trusted manufacturer and exporter of SS 304L U Type Half Round Tube Shields, delivering durable and customized protection solutions for global industrial applications. Chemical Composition of SS 304L – Austenitic Stainless Steel • Carbon (C): ≤ 0.035% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 18.0 – 20.0% • Nickel (Ni): 8.0 – 12.0% • Iron (Fe): Balance Applications: Ideal for high-temperature and corrosive environments where low carbon content is preferred to minimize carbide precipitation during welding. Uses • U-bend tube shielding in superheaters and heat exchangers • Return bend protection in boilers and WHRBs • Shielding of curved coils in steam reforming and process plants • Corrosion prevention in waste-to-energy and flue gas-exposed systems • Surface protection in ammonia plants, HRSGs, and incinerators Features • corrosion resistant – SS 304L offers excellent resistance to oxidation, scaling, and chemical attack in high-temperature environments • low carbon content – minimizes risk of carbide precipitation during welding, improving post-weld corrosion resistance • precise fit – custom-formed to match U-bend radius for secure installation and effective shielding • high durability – retains mechanical strength under thermal cycling and flue gas exposure • easy installation – designed for quick on-site mounting via clamping, welding, or banding • versatile finish – available in pickled, passivated, or bright annealed surface treatments • customizable – produced in various lengths, thicknesses, and diameters as per customer requirements Applications • Thermal power plants – Protects U-bend tubes in superheaters, reheaters, and economizers. Prevents oxidation, scaling, and thermal damage from flue gases. • Petrochemical refineries – Shields curved furnace and exchanger tubes. Resists heat, carburizing gases, and corrosive media. • Waste heat recovery systems (WHRBs) – Guards return bends from ash erosion and gas turbulence. Enhances tube life in incinerators, engines, and kilns. • Chemical and fertilizer plants – Used on U-bends in reactors and reformers. Prevents stress corrosion and thermal fatigue. • HRSGs and boilers – Installed on return coils exposed to high-temperature flue gases. Ensures reliable operation under cyclic heating conditions. Conclusion The SS 304L U Type Half Round Tube Shield by Ladhani Metal Corporation provides comprehensive and long-lasting protection for U-bend tube sections operating in aggressive thermal and corrosive environments. Manufactured with high-precision forming and superior materials, these shields offer reliable coverage, excellent weldability, and extended service life. As a leading manufacturer and exporter, Ladhani Metal Corporation offers customized shielding solutions that match your project’s specifications and environmental demands. For detailed specifications, technical support, or to request a quotation, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are specially designed components used to protect boiler and heat exchanger tubes from erosion, wear, and high-temperature damage. Manufactured with precision and expertise, these shields enhance tube life, reduce maintenance requirements, and support efficient operation in high-performance industrial systems. The half-round design enables quick installation and provides effective coverage for vulnerable tube surfaces. SS 304 U Type Half Round Tube Shield The SS 304 U Type Half Round Tube Shield is a specially fabricated, semi-circular tube protection device designed to fit around both the curved (U-bend) and straight sections of heat exchanger and boiler tubes. Constructed from premium-grade stainless steel 304, it offers exceptional resistance to corrosion, oxidation, and mechanical wear. Its U-shaped configuration ensures continuous protection along the bend radius, where erosion, thermal stress, and ash impingement are most intense. This shield is available in both inner and outer configurations to ensure full tube coverage. • Outer U Type Half Round Tube Shield – Shields the external curve of U-bend tubes from flame impingement, heat radiation, and gas flow abrasion. • Inner U Type Half Round Tube Shield – Protects the internal arc of the U-bend from turbulence, corrosion, and localized thermal impact. Ladhani Metal Corporation is a leading manufacturer and exporter of SS 304 U Type Half Round Tube Shields, offering high-quality and custom-engineered solutions to meet the demanding requirements of global industries. Chemical Composition of SS 304 – Austenitic Stainless Steel • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 18.0 – 20.0% • Nickel (Ni): 8.0 – 10.5% • Iron (Fe): Balance Applications: Ideal for use in thermal power systems, steam generation units, and petrochemical processing where tube bends are subject to extreme heat, corrosion, or flow-related erosion. Uses • Protection of U-bend sections in superheaters, reheaters, and economizers • Shielding of return bends in heat exchangers exposed to flue gas or high-velocity media • Enhancement of tube durability in HRSG systems and boilers • Erosion prevention in waste heat recovery boilers and furnace zones • Corrosion mitigation in chemical process plant U-tube bundles Features • Material: Manufactured from high-grade SS 304 for superior heat and corrosion resistance • Configuration: Inner and outer U-type shields available for full bend coverage • Design: Formed precisely to match U-bend tube radius for secure, vibration-free fitment • Finish: Bright annealed, pickled, or passivated finishes available (custom finishes on request) • Durability: High mechanical strength and long service life under thermal cycling • Customization: Available in various lengths, thicknesses, and diameters as per project requirements • Easy Installation: Designed for clamping, welding, or banding with minimal tube interference Applications • Thermal power stations and utility boilers • Waste-to-energy systems and HRSGs • Petrochemical refineries and furnace systems • Chemical processing and ammonia plants • Steam-based heat recovery units • Pulp and paper mills with superheater tube networks Conclusion The SS 304 U Type Half Round Tube Shield by Ladhani Metal Corporation offers a reliable and efficient solution for protecting U-bend tube sections in demanding high-temperature and corrosive environments. As a trusted manufacturer and exporter, Ladhani Metal Corporation delivers products that combine durability, precision, and performance. Designed for longevity and ease of installation, these shields help extend tube life and reduce unplanned maintenance. Custom-built to your specifications, our tube shields are a dependable solution for critical tube protection. For technical specifications, customized sizes, or quotation requests, please contact Ladhani Metal Corporation.

What is a Half Round Tube Shield? A Half Round Tube Shield is a specially designed metal cover that fits over the external curvature of tubes or pipes. It is commonly used in boilers, heat exchangers, and various high-temperature piping systems to prevent damage caused by erosion, corrosion, high-velocity gas flow, and thermal fatigue. These shields serve as a first line of defense by absorbing mechanical and chemical wear, thereby significantly extending the life of the underlying tubes. Tube shields are essential in high-stress areas where exposure to combustion gases, ash particles, or high-velocity steam can quickly degrade unprotected surfaces. By preventing direct impact on the base metal, they help reduce operational downtime, lower maintenance costs, and prevent unexpected system failures. In boiler systems, tube shields are especially important to avoid tube thinning and ruptures, ensuring safer and more efficient operation. Product Overview At Ladhani Metal Corporation, we manufacture and supply premium-quality Half Round Tube Shields for a wide range of industrial applications. Our products are known for their dimensional accuracy, durability, and superior resistance to wear and corrosion. Designed for harsh operating environments, our tube shields can be customized in terms of thickness, radius, length, and grade to suit specific operating requirements. Whether you require protection for straight tubes, bends, or special boiler tube configurations, we have a solution tailored for you. Available Grades We manufacture Half Round Tube Shields using high-performance stainless steel and alloy steel grades that are selected based on their mechanical strength, temperature tolerance, and corrosion resistance. Stainless Steel Grades: • SS 304, SS 304L • SS 316, SS 316L • SS 310, SS 310S • SS 410, SS 420, SS 430 Heat-Resistant & Alloy Steel Grades: • 1Cr18Ni9Ti • Cr25Ni20 • 1Cr25Ni20Si2 • Cr23Ni13 • 1Cr20Ni14Si2 • 1Cr13 These materials ensure the shields can withstand aggressive media, thermal cycling, and high-velocity particulate flow without cracking or deforming over time. Types of Half Round Tube Shields We offer various forms of Half Round Tube Shields to match different tube geometries and boiler configurations: • U-Type Half Round Tube Shield Designed to cover both the top and sides of the tube, offering extended protection in U-bend areas where wear is most common. • U-Type Outer Half Round Tube Shield Specifically shaped to shield the outer curvature of U-bend tubes, ideal for areas exposed to direct flame or gas flow. • U-Type Inner Half Round Tube Shield Fits the inner curvature of U-bend tubes to protect against erosion caused by high-velocity media turning around the bend. • Half Round Tube Shield for LTSH Type Custom-made to fit tubes in Low Temperature Super Heater (LTSH) sections, providing protection from ash and flue gases. • Half Round Straight Tube Shield Standard half-round shields used for straight tube sections, offering easy installation and effective protection. • Half Round Tube Shield for R/H Tube Designed for Reheater (R/H) tubes, typically found in high-temperature zones; made from heat-resistant materials. • Half Round Shield for Tube A general-purpose shield suitable for various industrial tubes requiring surface protection. • Half Round Tube Shield for WW Screen Engineered to fit water wall screen tubes, protecting against slagging and high radiant heat. • Half Round Tube Shield for Boiler Tube Specifically designed for boiler applications, these shields reduce wear cau Each type is designed for easy integration into existing boiler or piping systems, whether for repair, reinforcement, or preventive maintenance. Key Features ✔ High Durability – Effectively resists erosion, mechanical abrasion, scaling, and chemical attack ✔ Accurate Half-Round Fit – Custom-formed to ensure close contact and full protection of tube surface ✔ Weld-On or Clip-On Installation – Offers flexibility based on site requirements and installation methods ✔ Custom Sizes Available – Tailored to meet specific pipe diameters, wall thicknesses, and operating conditions ✔ Corrosion & Heat Resistance – Performs reliably under prolonged exposure to high temperatures and corrosive flue gases Conclusion Half Round Tube Shields by Ladhani Metal Corporation provide robust protection for critical tubing in boilers, heat exchangers, and high-temperature piping systems. Manufactured with a focus on performance, longevity, and ease of installation, these shields are a dependable solution for industrial operators aiming to enhance system reliability and reduce unplanned maintenance. 📩 Get in touch with us today for customized solutions, bulk order pricing, or technical consultations tailored to your specific industry requirements.

Product name:Gr2 Titanium Hemispherical Heads Standard: ASME VIII-I, DIN28013 Material: GR1, GR2, GR5, GR7, GR12 Size: Customized Gr2 Titanium Hemispherical heads The dish head refers to the element used to close the end of the container so that the internal and external media are isolated, also known as hemispherical heads/dish end/ Elliptical Dish End. The head of a cylindrical container is usually a revolving case. According to the shape of the head surface, it can be divided into convex shape, conical shape, flat shape and combination shape. Convex heads refer to heads with convex outer surface shape, such as hemispherical, oval, disc and unflanged spherical heads. Some gas cylinders use convex inward combined bottom head, which can not only ensure strength, but also meet the needs of safe use. A head is a part of a container that is welded to the cylinder. (As shown below) According to different geometric shapes, it can be divided into spherical, oval, disc, spherical crown, cone shell and cap, among which spherical, oval, disc and spherical crown heads are collectively referred to as convex heads. In the welding is divided into butt welding head, socket welding head. Used for all kinds of container equipment, such as storage tank, heat exchanger, tower, reactor, boiler and separation equipment, etc.