Thank you for writing to us. One of our executive will reach back to you through your submitted medium. In case there’s an urgency, feel free to connect over WhatsApp for faster response.
Prefer calling? Dial +919029362692 (International callers) or +919029362692 (Indian callers).
Product Name: Gr7 Titanium sheet
Standard: ASTM B265
Material: Gr7
Unit Price: $222.5usd/kg-$285.7usd/kg
Thickness: 0.5-100mm
Length: 500-6000mm Or As You Require
Width: 500-1000mm Or As You Require
Surface: Pickling, Polishing, Sand Blasting
Gr7 titanium sheet is high palladium content, and it is very resistant to corrosion. For example, titanium grade 7 is resistant to salt water and is also suitable for handling chlorides media. In addition, Titanium Grade 7 is resistant to erosion or impacts. plate usually used for Pressure vessel, fastener, frame, Aerospace vehicle, Chemical industry, ocean engineering etc.
Product Name: Gr7 Titanium sheet
Standard: ASTM B265
Material: Grade 7 (Ti-0.2Pd)
Thickness: 0.5-100mm
Length: 500-6000mm Or As You Require
Width: 500-1000mm Or As You Require
Surface: Pickling, Polishing, Sand Blasting
Quality inspections: Flaw detection, eddy current test, etc
Grade
Chemicai composition(WT%)
(Ti)
(Fe)
(C)
(N)
(H)
(O)
(Pd)
(Al)
(Sn)
Others
Each
Total
Gr7
Ti-0.2Pd
Remainder
≤0.30
≤0.08
≤0.03
≤0.015
≤0.25
0.12~0.25
/
/
≤0.1
≤0.4
Product name: Gr2 Titanium welded Tube
Standard:ASTM B338
Material: GR1 GR2 GR7 GR12
Diameter:10-914mm
Wall thickness:0.5-10mm
Length:Max 16000mm
Surface:Pickling surface/Polished
Type:Seamless, welded
Application:Heat Exchanger, chemical industry etc.
Technique:Rolled
Gr2 Titanium welded Tube
Titanium welded pipe is produced by automatic continuous production line, using titanium strip coil with uniform wall thickness through cold bending forming, welding, online heat treatment, sizing straightening, non-destructive testing and air tightness test and other procedures. From sponge titanium to welded pipe, the material utilization rate is usually about 80%, if the titanium strip coil as the raw material, its material utilization rate is more than 95%. With the rapid development of titanium industry and mature welding technology, the titanium tube welding will also greatly enhance production efficiency, quality stability, consistency, and the production efficiency will be higher, can according to customer request length cut into the required length, short delivery time, high material utilization, cost per unit is seamless tube will be lower.
Product name: Gr2 Titanium welded Tube
Standard:ASTM B338 ASTMB 862
Material: GR1 GR2 GR7 GR12
Diameter:10-914mm
Wall thickness:0.5-10mm
Length:Max 16000mm
Surface:Pickling surface/Polished
Type:Seamless, welded
Application:Heat Exchanger, chemical industry etc.
Technique:Rolled
MOQ:100kgs
Titanium welded pipe production process: titanium with open book - shearing butt - looping the loading - titanium belt cleaning - type pipe forming and welding to eddy current flaw detection, the predetermined diameter - online annealing - pure sizing/straightening to eddy current flaw detection, laser caliper - online printing - scale cutting and ultrasonic testing to fine scale/flat head, air tightness test to the finished product inspection, packaging warehousing.
Product Name: Gr7 Titanium sheet
Standard: ASTM B265
Material: Gr7
Unit Price: $222.5usd/kg-$285.7usd/kg
Thickness: 0.5-100mm
Length: 500-6000mm Or As You Require
Width: 500-1000mm Or As You Require
Surface: Pickling, Polishing, Sand Blasting
Gr7 titanium sheet is high palladium content, and it is very resistant to corrosion. For example, titanium grade 7 is resistant to salt water and is also suitable for handling chlorides media. In addition, Titanium Grade 7 is resistant to erosion or impacts. plate usually used for Pressure vessel, fastener, frame, Aerospace vehicle, Chemical industry, ocean engineering etc.
Product Name: Gr7 Titanium sheet
Standard: ASTM B265
Material: Grade 7 (Ti-0.2Pd)
Thickness: 0.5-100mm
Length: 500-6000mm Or As You Require
Width: 500-1000mm Or As You Require
Surface: Pickling, Polishing, Sand Blasting
Quality inspections: Flaw detection, eddy current test, etc
Grade
Chemicai composition(WT%)
(Ti)
(Fe)
(C)
(N)
(H)
(O)
(Pd)
(Al)
(Sn)
Others
Each
Total
Gr7
Ti-0.2Pd
Remainder
≤0.30
≤0.08
≤0.03
≤0.015
≤0.25
0.12~0.25
/
/
≤0.1
≤0.4
Product name: Gr2 Titanium welded Tube
Standard:ASTM B338
Material: GR1 GR2 GR7 GR12
Diameter:10-914mm
Wall thickness:0.5-10mm
Length:Max 16000mm
Surface:Pickling surface/Polished
Type:Seamless, welded
Application:Heat Exchanger, chemical industry etc.
Technique:Rolled
Gr2 Titanium welded Tube
Titanium welded pipe is produced by automatic continuous production line, using titanium strip coil with uniform wall thickness through cold bending forming, welding, online heat treatment, sizing straightening, non-destructive testing and air tightness test and other procedures. From sponge titanium to welded pipe, the material utilization rate is usually about 80%, if the titanium strip coil as the raw material, its material utilization rate is more than 95%. With the rapid development of titanium industry and mature welding technology, the titanium tube welding will also greatly enhance production efficiency, quality stability, consistency, and the production efficiency will be higher, can according to customer request length cut into the required length, short delivery time, high material utilization, cost per unit is seamless tube will be lower.
Product name: Gr2 Titanium welded Tube
Standard:ASTM B338 ASTMB 862
Material: GR1 GR2 GR7 GR12
Diameter:10-914mm
Wall thickness:0.5-10mm
Length:Max 16000mm
Surface:Pickling surface/Polished
Type:Seamless, welded
Application:Heat Exchanger, chemical industry etc.
Technique:Rolled
MOQ:100kgs
Titanium welded pipe production process: titanium with open book - shearing butt - looping the loading - titanium belt cleaning - type pipe forming and welding to eddy current flaw detection, the predetermined diameter - online annealing - pure sizing/straightening to eddy current flaw detection, laser caliper - online printing - scale cutting and ultrasonic testing to fine scale/flat head, air tightness test to the finished product inspection, packaging warehousing.
Product Name: Gr7 Titanium sheet
Standard: ASTM B265
Material: Gr7
Unit Price: $222.5usd/kg-$285.7usd/kg
Thickness: 0.5-100mm
Length: 500-6000mm Or As You Require
Width: 500-1000mm Or As You Require
Surface: Pickling, Polishing, Sand Blasting
Gr7 titanium sheet is high palladium content, and it is very resistant to corrosion. For example, titanium grade 7 is resistant to salt water and is also suitable for handling chlorides media. In addition, Titanium Grade 7 is resistant to erosion or impacts. plate usually used for Pressure vessel, fastener, frame, Aerospace vehicle, Chemical industry, ocean engineering etc.
Product Name: Gr7 Titanium sheet
Standard: ASTM B265
Material: Grade 7 (Ti-0.2Pd)
Thickness: 0.5-100mm
Length: 500-6000mm Or As You Require
Width: 500-1000mm Or As You Require
Surface: Pickling, Polishing, Sand Blasting
Quality inspections: Flaw detection, eddy current test, etc
Grade
Chemicai composition(WT%)
(Ti)
(Fe)
(C)
(N)
(H)
(O)
(Pd)
(Al)
(Sn)
Others
Each
Total
Gr7
Ti-0.2Pd
Remainder
≤0.30
≤0.08
≤0.03
≤0.015
≤0.25
0.12~0.25
/
/
≤0.1
≤0.4
Product name: Gr2 Titanium welded Tube
Standard:ASTM B338
Material: GR1 GR2 GR7 GR12
Diameter:10-914mm
Wall thickness:0.5-10mm
Length:Max 16000mm
Surface:Pickling surface/Polished
Type:Seamless, welded
Application:Heat Exchanger, chemical industry etc.
Technique:Rolled
Gr2 Titanium welded Tube
Titanium welded pipe is produced by automatic continuous production line, using titanium strip coil with uniform wall thickness through cold bending forming, welding, online heat treatment, sizing straightening, non-destructive testing and air tightness test and other procedures. From sponge titanium to welded pipe, the material utilization rate is usually about 80%, if the titanium strip coil as the raw material, its material utilization rate is more than 95%. With the rapid development of titanium industry and mature welding technology, the titanium tube welding will also greatly enhance production efficiency, quality stability, consistency, and the production efficiency will be higher, can according to customer request length cut into the required length, short delivery time, high material utilization, cost per unit is seamless tube will be lower.
Product name: Gr2 Titanium welded Tube
Standard:ASTM B338 ASTMB 862
Material: GR1 GR2 GR7 GR12
Diameter:10-914mm
Wall thickness:0.5-10mm
Length:Max 16000mm
Surface:Pickling surface/Polished
Type:Seamless, welded
Application:Heat Exchanger, chemical industry etc.
Technique:Rolled
MOQ:100kgs
Titanium welded pipe production process: titanium with open book - shearing butt - looping the loading - titanium belt cleaning - type pipe forming and welding to eddy current flaw detection, the predetermined diameter - online annealing - pure sizing/straightening to eddy current flaw detection, laser caliper - online printing - scale cutting and ultrasonic testing to fine scale/flat head, air tightness test to the finished product inspection, packaging warehousing.
Product name: Grade 7 titanium tubes
Standard:ASTM B338 ASTM B861 ASTM B862
Material:Titanium Gr7
Diameter:5-914mm
Wall thickness:0.5-10mm
Length:Max 16000mm
Surface:Pickling surface/Polished
Type:Seamless, welded
Application:Heat Exchanger, chemical industry etc.
Technique:Rolled
Grade 7 Titanium Tubes
Product name: Grade 7 titanium tubes
Standard:ASTM B338 ASTM B861 ASTM B862
Material:Titanium Gr7
Diameter:5-914mm
Wall thickness:0.5-10mm
Length:Max 16000mm
Surface:Pickling surface/Polished
Type:Seamless, welded
Application:Heat Exchanger, chemical industry etc.
Technique:Rolled
Dimension and Tolerance of titanium tube
Outside diameter,
in.(mm)
Diameter tolerance,
in.(mm)
Permissible variations , wall thinckness,
t, % in.(mm)
<1 (25.4) ±0.004( ± 0.012) ±10
1-1½(25.4-38.1) ±0.005( ±0.127 ) ±10
1½-2(38.1-50.8) ±0.006( ± 0.152) ±10
2-2½(50.8-63.5) ±0.007( ± 0.178) ±10
2½-3½(63.5-88.9) ±0.010( ± 0.254) ±10
Grade 7 (Ti-0.2Pd) titanium tube
Chemical compositions(weight%,<=)
Pd
Al
V
Fe
C
0.12-0.25
----
----
0.30
0.08
N
H
O
Other(total)
Ti
0.05
0.015
0.2
0.4
Remainder
Physical properties(>=)
Σb
Tensile Strength
(Mpa)
σr0.2
Yield Strength
(Mpa)
δL0+50mm
Elongation
(%)
ψ
Reduction of area
(%)
370
250
20
25
The density of titanium alloy is generally about 4.51g/ cubic centimeter, only 60 of steel, the strength of pure titanium is close to the strength of ordinary steel, some high strength titanium alloy exceeds the strength of many alloy structural steel. Therefore, the specific strength (strength/density) of titanium alloy is much higher than that of other metal structural materials, as shown in Table 7-1. It can produce components with high unit strength, good rigidity and light weight. At present, titanium alloy is used for engine components, skeleton, skin, fasteners and landing gear.
High thermal strength
The use temperature is several hundred degrees higher than aluminum alloy, can still maintain the required strength at moderate temperature, can work for a long time at 450500 temperature these two titanium alloys still have high specific strength in the range of 150500, and aluminum alloy at 150 than the strength decreased significantly. Titanium alloys operate at temperatures up to 500, while aluminum alloys operate below 200.
Good resistance to corrosion
The corrosion resistance of titanium alloy is much better than that of stainless steel when working in humid atmosphere and seawater medium. Resistance to pitting corrosion, acid corrosion, stress corrosion is particularly strong; Excellent corrosion resistance to alkali, chloride, chlorine organic articles, nitric acid, sulfuric acid and so on. But titanium has poor corrosion resistance to reducing oxygen and chromite medium.
Good low temperature performance
Titanium alloy can keep its mechanical properties at low temperature and ultra low temperature. Titanium alloys with good low temperature performance and very low gap elements, such as TA7, can maintain certain plasticity at -253. Therefore, titanium alloy is also an important low temperature structural material.