Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are precision-engineered components used to protect heat exchanger and boiler tubes from erosion, scaling, slag buildup, and high-temperature oxidation. These shields are commonly applied in thermal and industrial systems where tubes are exposed to flue gases, particulate flow, and repeated thermal cycling. The half-round design ensures secure and efficient coverage over straight or curved tube sections, reducing maintenance needs and enhancing tube lifespan. SS 430 U Type Outer Half Round Tube Shield The SS 430 U Type Outer Half Round Tube Shield is fabricated from SS 430, a ferritic stainless steel known for its good corrosion resistance, oxidation resistance, and excellent formability. This outer U-type shield is specifically designed to protect the outer arc of U-bend tubes in boilers, heat exchangers, and recovery systems. SS 430 is highly resistant to stress corrosion cracking and scaling in mildly corrosive and high-temperature environments, making it a cost-effective solution for less aggressive service conditions. • Outer U Type Half Round Tube Shield – Shields the outer curvature of U-bend tubes against heat, slag, soot erosion, and surface oxidation from flue gases. Ladhani Metal Corporation is a reliable manufacturer, supplier, and exporter of SS 430 U Type Outer Half Round Tube Shields, offering dependable protection for boiler and exchanger tube bends in moderate-temperature industrial environments. Chemical Composition of SS 430 – Ferritic Stainless Steel • Carbon (C): ≤ 0.12% • Manganese (Mn): ≤ 1.00% • Phosphorus (P): ≤ 0.040% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 16.0 – 18.0% • Nickel (Ni): ≤ 0.75% • Iron (Fe): Balance Applications: Ideal for moderate-temperature, mildly corrosive environments where oxidation resistance and mechanical durability are required. Uses • Outer bend protection of U-tubes in reheaters and superheaters in thermal power generation systems • Shielding of external arcs in waste heat recovery units and heat exchangers exposed to dry or clean flue gases • Coverage of U-bend tubes in utility boilers and economizers with low chloride or sulfuric gas exposure • Suitable for food processing and clean air systems requiring stable performance under elevated temperatures • Used in systems where stress corrosion cracking resistance and cost-effective shielding are priorities Features • Good corrosion and oxidation resistance – Chromium-rich alloy resists surface oxidation and rust formation at elevated temperatures • Outer arc coverage – Provides mechanical and thermal shielding for the most exposed curve of U-bend tubes • Thermal stability – Performs reliably in temperatures up to 815°C with good resistance to scaling and heat stress • Easy installation – Can be mounted using clamps, banding, or tack welding without requiring disassembly of the system • Precision fit – Custom-fabricated to fit specific tube diameters and radii, ensuring secure, movement-free installation • Economical solution – Offers dependable performance at a lower cost compared to austenitic stainless steels Applications • thermal and captive power plants – Installed on U-bend outer arcs in superheaters and economizers exposed to moderate flue gases • heat recovery systems – Shields bends in WHRB and HRSG systems operating under low-corrosive and oxidizing conditions • general industrial boilers – Protects tube surfaces from surface scaling and minor gas abrasion • process industries – Suitable for clean air and low-chloride gas systems in the food, paper, or light chemical sectors • HVAC and ventilation systems – Used in exhaust and heating systems requiring corrosion-resistant but cost-effective shielding Conclusion The SS 430 U Type Outer Half Round Tube Shield by Ladhani Metal Corporation—manufacturer, supplier, and exporter—is a cost-effective and reliable protective component for U-bend tube outer surfaces in industrial systems. With good oxidation resistance, structural integrity under moderate heat, and easy installation, it is ideal for power plants, recovery systems, and clean process industries where durable but economical shielding is required. For technical consultation, custom orders, or quotations, please contact Ladhani Metal Corporation

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are precision-engineered components used to protect boiler and heat exchanger tubes from erosion, scaling, and high-temperature corrosion. These shields are widely applied in industrial systems exposed to thermal cycling, aggressive gases, and particulate flow. Their half-round shape allows for simple and secure installation over straight or curved tube surfaces, extending tube life and reducing maintenance needs. SS 316L U Type Outer Half Round Tube Shield The SS 316L U Type Outer Half Round Tube Shield is manufactured from SS 316L, a low-carbon molybdenum-bearing austenitic stainless steel known for its superior corrosion resistance and excellent weldability. This outer U-type configuration is designed to protect the external arc of U-bend tubes in boilers, superheaters, heat exchangers, and waste heat recovery systems. The low carbon content of SS 316L reduces the risk of sensitization and intergranular corrosion, making it ideal for welded systems exposed to chlorides, acidic gases, and steam. • Outer U Type Half Round Tube Shield – Offers full coverage to the outer curvature of U-bend tubes, shielding against erosion, slag buildup, high-temperature oxidation, and chemical attack. Ladhani Metal Corporation is a leading manufacturer, supplier, and exporter of SS 316L U Type Outer Half Round Tube Shields, delivering precision-built, long-lasting solutions for demanding industrial applications. Chemical Composition of SS 316L – Low-Carbon Austenitic Stainless Steel • Carbon (C): ≤ 0.03% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 16.0 – 18.0% • Nickel (Ni): 10.0 – 14.0% • Molybdenum (Mo): 2.0 – 3.0% • Iron (Fe): Balance Applications: Suited for high-temperature and corrosive environments requiring superior resistance to chlorides, acids, and weld-induced corrosion. Uses • Protection of U-bend outer arcs in superheaters and reheaters in thermal and nuclear power stations • Shielding tube bends in chemical heat exchangers and steam reformers exposed to chlorides and acidic gases • Outer bend coverage for WHRB and HRSG tubes subjected to flue gas flow, scaling, and erosion • Applied to return bends in condensers and evaporators in marine and coastal facilities • Ideal for pharmaceutical, food processing, and clean energy systems requiring low carbon stainless steel Features • Exceptional corrosion resistance – Molybdenum addition enhances resistance to pitting, crevice corrosion, and chlorides • Low carbon content – Minimizes the risk of sensitization and intergranular corrosion after welding or high-heat exposure • High-temperature capability – Maintains performance under cyclic heating and thermal stress conditions • Precision fitment – Custom-fabricated to match tube diameter and radius, ensuring tight, vibration-free installation • Easy installation – Mountable with clamps, banding, or tack welds without requiring shutdown or disassembly • Long-term durability – Withstands corrosive gases, scaling, and erosion, extending tube life and reducing downtime Applications • thermal power plants – Protects outer arcs of U-bend tubes from flue gas erosion and scaling in high-temperature zones • chemical and petrochemical plants – Shields return bends in reformers and exchangers operating with corrosive process media • waste heat recovery systems – Provides protection in WHRBs and HRSGs from thermal fatigue and particulate-laden flue gases • marine and offshore facilities – Suitable for chloride-rich environments such as desalination plants and coastal condensers • process and pharmaceutical industries – Ensures corrosion-resistant performance in systems with stringent cleanliness and durability requirements Conclusion The SS 316L U Type Outer Half Round Tube Shield by Ladhani Metal Corporation—manufacturer, supplier, and exporter—is a corrosion-resistant, precision-engineered solution for protecting U-bend tube outer surfaces in boilers and heat exchangers. Its low carbon content, molybdenum-enhanced alloy composition, and excellent weldability make it ideal for harsh industrial environments requiring high performance and reliability. Designed for easy installation and long service life, it is a trusted choice for power, petrochemical, marine, and process applications. For technical consultation, custom orders, or quotations, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are precision-engineered components used to protect boiler and heat exchanger tubes from erosion, scaling, and high-temperature corrosion. These shields are widely applied in industrial systems exposed to thermal cycling, aggressive gases, and particulate flow. Their half-round shape allows for simple and secure installation over straight or curved tube surfaces, extending tube life and reducing maintenance needs. SS 304L U Type Outer Half Round Tube Shield The SS 304L U Type Outer Half Round Tube Shield is manufactured from low-carbon austenitic stainless steel, SS 304L, offering enhanced weldability and resistance to intergranular corrosion. This shield is specifically designed to protect the outer curvature of U-bend tubes in high-temperature and moderately corrosive environments such as boilers, superheaters, and heat exchangers. The outer U-type configuration focuses on shielding the most exposed area of return bends from flue gas erosion, slag impact, and thermal oxidation. • Outer U Type Half Round Tube Shield – Provides targeted protection to the external arc of U-bend tubes, reducing surface degradation caused by hot gas streams and mechanical wear. Ladhani Metal Corporation supplies SS 304L U Type Outer Half Round Tube Shields with precision-engineered profiles to ensure long-term performance and durability in harsh industrial conditions. Chemical Composition of SS 304L – Low-Carbon Austenitic Stainless Steel • Carbon (C): ≤ 0.035% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 18.0 – 20.0% • Nickel (Ni): 8.0 – 12.0% • Iron (Fe): Balance Applications: Well-suited for moderately corrosive, high-temperature environments where resistance to weld decay and oxidation is required. Uses • Protection of outer U-bend surfaces in superheaters and reheaters in thermal power generation systems • Shielding external arcs in heat exchangers and condensers in the chemical and petrochemical industries • Outer bend coverage in waste heat recovery boilers (WHRBs) and HRSGs exposed to flue gases and particulate flow • Used in marine, food-grade, and process steam systems where chloride resistance and cleanliness are important • Ideal for systems requiring excellent weldability and post-fabrication corrosion resistance Features • Excellent corrosion resistance – Low carbon content improves resistance to intergranular corrosion after welding or high-heat exposure. • Outer U-bend protection – Specifically shaped to guard the outer surface of U-bend tubes from high-temperature gas flow and slag contact. • High-temperature performance – Performs reliably in temperatures up to 870°C, resisting scale formation and oxidation. • Custom fit – Engineered to precisely match tube diameters and bend radii for a snug and stable fit without displacement. • Easy to install – Can be quickly mounted using clamps, stainless banding, or tack welds without requiring system downtime or disassembly. • Long service life – Withstands thermal cycling and corrosive gas exposure to minimize tube damage and maintenance intervals. Applications • power plants – Used in superheaters and reheaters for protecting the outer arcs of return bends from flue gas and heat-related scaling. • chemical processing – Shields tube surfaces in exchangers and preheaters that experience moderate chemical attack and thermal fatigue. • WHRBs and HRSGs – Installed on outer curves of U-bend tubes to prevent erosion and reduce downtime in heat recovery systems. • marine and coastal facilities – Suitable for salt-laden environments where chloride resistance is essential for sustained performance. • food, beverage, and clean process industries – Provides hygienic protection for tube bends in steam and thermal processing systems. Conclusion The SS 304L U Type Outer Half Round Tube Shield by Ladhani Metal Corporation offers dependable protection for the most vulnerable outer surfaces of U-bend tubes in high-temperature and moderately corrosive applications. With its low-carbon alloy composition, it combines superior corrosion resistance with excellent weldability, making it ideal for power generation, petrochemical, marine, and process industries. Customizable to your system’s specifications, this shield ensures long-lasting performance, reduced maintenance, and improved system reliability. For technical consultation, custom orders, or quotations, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are precision-engineered components used to protect boiler and heat exchanger tubes from erosion, scaling, and high-temperature corrosion. These shields are widely applied in industrial systems exposed to thermal cycling, aggressive gases, and particulate flow. Their half-round shape allows for simple and secure installation over straight or curved tube surfaces, extending tube life and reducing maintenance needs. 1Cr13 U Type Half Round Tube Shield The 1Cr13 U Type Half Round Tube Shield is fabricated from 1Cr13, a martensitic stainless steel known for its excellent hardness, wear resistance, and moderate corrosion resistance. This U-type shield is ideal for protecting U-bend tube sections in systems where mechanical wear, steam erosion, and intermittent high temperatures are a concern. The U-shaped design offers precise coverage of both the inner and outer arcs of tube bends, especially in boiler coils, superheaters, and heat exchangers where localized wear and thermal impact are concentrated. • Outer U Type Half Round Tube Shield – Shields the outer curvature of the U-bend from gas flow abrasion, impact from slag particles, and heat-induced surface degradation. • Inner U Type Half Round Tube Shield – Protects the inner radius against turbulence-induced erosion, scaling, and mechanical fatigue. Ladhani Metal Corporation supplies 1Cr13 U Type Half Round Tube Shields for industrial applications where strength, hardness, and moderate corrosion protection are required at an economical cost. Chemical Composition of 1Cr13 – Martensitic Stainless Steel • Carbon (C): 0.15 – 0.20% • Manganese (Mn): ≤ 1.00% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 12.0 – 14.0% • Nickel (Ni): ≤ 0.60% • Iron (Fe): Balance Applications: Well-suited for mildly corrosive and abrasive environments involving steam, flue gases, or mechanical impact at moderate to high temperatures. Uses • Protection of U-bend tubes in superheaters, reheaters, and boiler coils • Shielding curved tubes in industrial furnaces, economizers, and condensers • Coverage for return bends in WHRBs and HRSGs subject to mechanical and thermal wear • Application in process gas heaters and utility boilers in petrochemical and power sectors • Ideal for systems where hardness and erosion resistance are more critical than high corrosion resistance Features • Good oxidation and scaling resistance – Chromium content offers adequate protection in dry, high-temperature environments. • High mechanical strength – Martensitic structure provides superior wear resistance and hardness, reducing erosion damage in turbulent flow areas. • Dual-bend protection – Available in both inner and outer U-type configurations for complete shielding of tube bends. • Custom fitment – Precisely manufactured to match specific tube radii and diameters, ensuring stable and secure installation. • Fast installation – Easily attached using clamps, banding, or tack welding without requiring system disassembly. • Economical solution – Provides effective protection in harsh environments with a cost-efficient stainless steel alloy. Applications • thermal power plants – Used on U-bend tubes in superheaters and reheaters where flue gas erosion and steam wear are present. Enhances system life and performance. • waste heat recovery boilers – Shields tube bends in WHRBs from slag, scale, and high-velocity gas streams, improving long-term reliability. • petrochemical industries – Suitable for curved tubes in heaters, exchangers, and gas furnaces exposed to heat and particulate flow. • general industrial boilers – Applied to return bends in utility boilers and process heaters for erosion and oxidation control. • chemical and refining sectors – Ideal for non-aggressive environments requiring mechanical protection more than extreme corrosion resistance. Conclusion The 1Cr13 U Type Half Round Tube Shield by Ladhani Metal Corporation offers strong mechanical protection and moderate corrosion resistance for U-bend tube sections in boilers, heat exchangers, and industrial heating systems. Its martensitic stainless steel composition provides superior wear resistance, making it well-suited for environments with steam erosion, thermal stress, and mechanical impact. Designed for easy installation and long-term durability, this shield is a practical solution for a wide range of thermal and utility applications. For technical consultation, custom orders, or quotations, please contact Ladhani Metal Corporation.

DIN 2573 Stainless Steel Flanges PN 6 are precision-manufactured flat flanges made from high-grade stainless steel, designed for low-pressure applications across a broad range of industrial sectors. Compliant with DIN 2573 standards, these flanges provide excellent corrosion resistance, mechanical reliability, and compatibility with standard piping systems. They are commonly used in non-critical, low-pressure environments in industries such as water treatment, HVAC, food processing, and general utility piping systems. Ladhani Metal Corporation is a reputable manufacturer and exporter of stainless steel flanges, offering components that adhere to international quality benchmarks. The flat flange design simplifies assembly and disassembly, making these flanges a practical choice for systems requiring easy maintenance and reliable sealing at lower pressure ranges. Pressure Rating: • PN 6 (6 bar / 87 psi): Engineered for low-pressure systems where moderate sealing performance and corrosion resistance are essential. Flange Types: • Plate Flanges Used in low-pressure piping systems for simple bolted connections with gaskets. • Flat Face (FF) Flanges Ideal for use with cast iron equipment or non-metallic gaskets to ensure uniform surface contact. • Slip-On Flanges Designed for ease of installation by sliding over the pipe and welding both sides for moderate sealing. • Custom-Machined Flanges Available in specific dimensions and stainless steel grades as per customer specifications and operational requirements. Stainless Steel Grades and Composition: 1. 304 (Austenitic Stainless Steel) Composition: • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 18.0 – 20.0% • Nickel (Ni): 8.0 – 11.0% Applications: Used in water supply lines, food-grade piping, and low-pressure process lines due to its hygienic properties and corrosion resistance. 2. 316 (Molybdenum-Alloyed Stainless Steel) Composition: • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 16.0 – 18.0% • Nickel (Ni): 10.0 – 14.0% • Molybdenum (Mo): 2.0 – 3.0% Applications: Suited for mildly corrosive environments including water filtration systems and food-grade tanks. 3. 321 (Titanium-Stabilized Stainless Steel) Composition: • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 17.0 – 19.0% • Nickel (Ni): 9.0 – 12.0% • Titanium (Ti): ≥ 5x(C+N) Applications: Applicable in moderately high temperatures or where intergranular corrosion resistance is important, such as thermal pipelines and heating systems. Applications of DIN 2573 Stainless Steel Flanges: • Water Distribution and Treatment Systems: Used in potable and waste water systems, ensuring non-reactive and rust-resistant performance. • HVAC and Building Installations: Employed in air ducts, chilled water lines, and other HVAC components where low-pressure performance is sufficient. • Food and Beverage Processing: Chosen for hygienic piping setups in non-pressurized fluid transfer applications. • Industrial Utility Lines: Integrated into auxiliary piping systems for lubricants, cooling water, and drainage. • Agricultural and Irrigation Systems: Used in low-pressure pumping and irrigation lines due to their corrosion resistance and ease of installation. Key Features: • Manufactured in compliance with DIN 2573 standard • PN 6 pressure rating suitable for non-critical systems • Excellent corrosion resistance with hygienic surface options • Flat and slip-on configurations for simplified assembly • Available in 304, 316, 321, and other stainless steel grades Conclusion: DIN 2573 Stainless Steel Flanges PN 6 by Ladhani Metal Corporation offer a cost-effective and reliable solution for low-pressure applications. Their corrosion-resistant material, ease of installation, and compliance with international standards make them ideal for various general-purpose industrial systems. For tailored configurations, specific material grades, or technical support, contact Ladhani Metal Corporation.

DIN 2568 Monel Flanges PN 64 are high-integrity threaded flanges manufactured from corrosion-resistant Monel alloys, designed to perform reliably under high pressure and in highly corrosive environments. Built in accordance with DIN 2568 standards, these flanges offer outstanding resistance to seawater, acids, and alkalis, while maintaining high mechanical strength and thermal stability. They are ideally suited for use in marine, chemical, oil and gas, and offshore applications where both durability and corrosion performance are critical. Ladhani Metal Corporation is a recognized manufacturer and exporter of Monel flanges, offering components that conform to global industry specifications. The threaded design facilitates easy, weld-free installation and disassembly, making them ideal for systems requiring frequent maintenance or rapid assembly in corrosive environments. Pressure Rating: • PN 64 (64 bar / 928 psi): Specially engineered for high-pressure systems exposed to aggressive chemical environments, ensuring mechanical integrity and long service life. Flange Types: • Threaded (Screwed) Flanges Enable efficient, non-welded installation and maintenance in high-corrosion environments. • Raised Face (RF) Flanges Improve gasket sealing performance in systems with pressure and temperature variations. • Flat Face (FF) Flanges Suited for connections with flat-faced components, ensuring uniform gasket load distribution. • Forged Threaded Flanges Provide enhanced strength, dimensional precision, and resistance to corrosion. • Custom-Machined Flanges Available in a variety of sizes, pressure ratings, and Monel grades to suit specific application needs. Available Monel Grades and Composition: 1. Monel 400 (UNS N04400) Composition: • Nickel (Ni): ≥ 63.0% • Copper (Cu): 28.0 – 34.0% • Iron (Fe): 2.0 – 2.5% • Manganese (Mn): ≤ 2.0% Applications: Commonly used in marine engineering, chemical processing, and hydrocarbon systems for its excellent resistance to saltwater, hydrofluoric acid, and stress corrosion cracking. 2. Monel K500 (UNS N05500) Composition: • Nickel (Ni): ≥ 63.0% • Copper (Cu): 27.0 – 33.0% • Aluminum (Al): 2.3 – 3.15% • Titanium (Ti): 0.35 – 0.85% Applications: Ideal for high-strength applications such as pump shafts, marine fasteners, and heat exchangers, combining the corrosion resistance of Monel 400 with increased hardness and tensile strength. Applications of DIN 2568 Monel Flanges: • Marine and Offshore Systems Used in seawater piping, ballast systems, and marine heat exchangers. • Chemical and Petrochemical Plants Resistant to acidic and alkaline media in processing plants and reactors. • Oil and Gas Industry Applied in sour gas service, separators, and wellhead systems. • Power Generation Installed in condensers, boilers, and cooling systems exposed to aggressive fluids. • Aerospace and Heat Treatment Suitable for exhaust systems, fixtures, and salt bath environments. Key Features: • Conforms to DIN 2568 standard • Rated for PN 64 high-pressure service • Exceptional resistance to seawater, acids, and alkalis • High strength, ductility, and fatigue resistance • Threaded design allows for fast, weld-free installation and disassembly • Supplied with test certificates, material traceability, and quality documentation • Available with custom machining, finishing, and dimensional options Conclusion: DIN 2568 Monel Flanges PN 64 from Ladhani Metal Corporation offer an optimal solution for high-pressure systems operating in chemically aggressive or marine environments. With superior mechanical performance and corrosion resistance, Monel 400 and K500 flanges provide long-lasting service life in demanding applications. For technical support, grade selection, or custom orders, contact Ladhani Metal Corporation today

DIN 2568 Inconel Flanges PN 64 are precision-engineered threaded flanges made from high-strength Inconel alloys, designed for reliable operation in high-pressure, high-temperature, and corrosive environments. Manufactured in accordance with DIN 2568 standards, these flanges are ideal for use in critical industries such as aerospace, chemical processing, marine, nuclear, and high-temperature power generation, where resistance to oxidation, corrosion, and thermal fatigue is essential. Ladhani Metal Corporation is a trusted manufacturer and exporter of Inconel flanges, offering components that adhere to the highest international quality and dimensional standards. The threaded design allows for quick, weld-free installation and removal, making these flanges highly suitable for systems requiring regular maintenance or disassembly. Pressure Rating: • PN 64 (64 bar / 928 psi): Engineered for high-pressure applications where material performance under extreme conditions is crucial. Flange Types: • Threaded (Screwed) Flanges Provide efficient, weld-free assembly, ideal for pressure systems requiring ease of maintenance. • Raised Face (RF) Flanges Enhance sealing under high pressure and temperature using focused gasket compression. • Flat Face (FF) Flanges Used for even surface contact with flat-faced components, particularly when working with brittle or non-metallic materials. • Forged Threaded Flanges Offer improved mechanical strength, resistance to thermal fatigue, and precise dimensional control. • Custom-Machined Flanges Available in various Inconel grades, dimensions, and configurations as per project requirements. Available Inconel Grades and Composition: 1. Inconel 600 (UNS N06600) • Nickel (Ni): ≥ 72.0% • Chromium (Cr): 14.0 – 17.0% • Iron (Fe): 6.0 – 10.0% Applications: Used in chemical processing, heat-treating equipment, and nuclear reactors due to its excellent resistance to oxidation and carburization at elevated temperatures. 2. Inconel 625 (UNS N06625) • Nickel (Ni): ≥ 58.0% • Chromium (Cr): 20.0 – 23.0% • Molybdenum (Mo): 8.0 – 10.0% • Niobium (Nb): 3.15 – 4.15% Applications: Suitable for marine, aerospace, and chemical environments where superior strength, fatigue resistance, and protection from pitting and chloride-induced corrosion are required. 3. Inconel 718 (UNS N07718) • Nickel (Ni): 50.0 – 55.0% • Chromium (Cr): 17.0 – 21.0% • Iron (Fe): Balance • Niobium (Nb) + Tantalum (Ta): 4.75 – 5.50% • Molybdenum (Mo): 2.80 – 3.30% Applications: Preferred for aerospace, high-speed turbines, and cryogenic systems due to its high tensile strength, creep resistance, and performance across a wide temperature range from cryogenic to over 700°C. Applications of DIN 2568 Inconel Flanges: • Aerospace and Jet Engine Components Used in high-temperature exhaust, combustion, and structural parts. • Chemical and Petrochemical Processing Ideal for vessels, piping, and heat exchangers handling aggressive acids and solvents. • Marine and Offshore Environments Resistant to seawater corrosion and mechanical wear in subsea and shipboard systems. • Nuclear and Power Generation Suitable for steam generators, fuel handling systems, and reactor components. • High-Temperature Industrial Systems Used in furnace systems, heat-treatment fixtures, and thermal reactors. Key Features: • Conforms to DIN 2568 standard • Rated for PN 64 high-pressure service • Excellent resistance to corrosion, oxidation, and thermal fatigue • High mechanical strength and performance across wide temperature ranges • Threaded design enables non-welded, fast installation and disassembly • Available with test certificates, MTCs, and full traceability • Custom machining, surface treatment, and heat-resistance options available Conclusion: DIN 2568 Inconel Flanges PN 64 from Ladhani Metal Corporation are engineered for durability and precision in high-stress, high-temperature, and corrosive environments. Available in Inconel 600, 625, and 718, these flanges provide industry-leading strength, corrosion resistance, and reliability for the most critical applications. For tailored specifications, technical support, or consultation, contact Ladhani Metal Corporation today.

DIN 2568 Super Duplex Steel Flanges PN 64 are premium-grade threaded flanges manufactured from high-performance super duplex stainless steel, designed to withstand extreme mechanical loads and highly corrosive environments. In compliance with DIN 2568 standards, these flanges offer exceptional strength, superior resistance to pitting and crevice corrosion, and excellent performance under high pressure and temperature variations, making them ideal for demanding applications in offshore, petrochemical, marine, and desalination industries. Ladhani Metal Corporation is a renowned manufacturer and exporter of super duplex flanges, supplying components that meet stringent global standards for quality, precision, and reliability. The threaded design ensures weld-free, easy installation and removal, making these flanges highly suitable for systems requiring quick assembly and periodic maintenance. Pressure Rating: • PN 64 (64 bar / 928 psi): Engineered for high-pressure and aggressive service conditions where material integrity and corrosion resistance are critical. Flange Types: • Threaded (Screwed) Flanges Facilitates rapid, weld-free assembly and disassembly, particularly in maintenance-intensive systems. • Raised Face (RF) Flanges Improves sealing effectiveness in high-pressure applications by concentrating gasket compression. • Flat Face (FF) Flanges Ideal for systems with flat mating surfaces, especially where non-metallic or brittle materials are used. • Forged Threaded Flanges Manufactured for enhanced strength, dimensional accuracy, and resilience in corrosive environments. • Custom-Machined Flanges Available in various sizes, sealing types, and super duplex grades, tailored to meet specific project requirements. Available Super Duplex Grades and Composition: 1. Super Duplex Steel Composition: • Chromium (Cr): 24.0 – 26.0% • Nickel (Ni): 6.0 – 8.0% • Molybdenum (Mo): 3.0 – 4.0% • Tungsten (W): 0.5 – 1.0% • Nitrogen (N): 0.20 – 0.30% • Carbon (C): ≤ 0.030% Applications: Used in highly corrosive environments such as seawater systems, desalination plants, and chemical reactors where maximum corrosion protection and mechanical strength are required. Applications of DIN 2568 Super Duplex Flanges: • Offshore and Subsea Engineering: Designed for long-term performance in saltwater, high-pressure, and submerged environments. • Oil and Gas Sector: Used in sour service, high-pressure pipelines, separators, and riser systems. • Chemical and Petrochemical Plants: Resistant to aggressive media such as chlorides, acids, and organic solvents. • Desalination and Water Treatment: Ideal for use in reverse osmosis systems, brine handling, and filtration modules. • Power Generation and Marine Infrastructure: Installed in heat exchangers, cooling systems, and seawater intake structures. Key Features: • Manufactured according to DIN 2568 specifications • Rated for PN 64 high-pressure service • Outstanding resistance to corrosion, pitting, and chloride-induced stress cracking • High yield strength and fatigue resistance • Threaded connection allows for easy, non-permanent assembly • Supplied with test certificates, MTCs, and full material traceability • Surface finish and machining available as per customer requirement Conclusion: DIN 2568 Super Duplex Flanges PN 64 from Ladhani Metal Corporation represent the ideal solution for high-pressure, highly corrosive, and mechanically challenging environments. With exceptional durability, corrosion protection, and installation efficiency, these flanges are engineered for performance and reliability. For custom dimensions, technical support, or grade selection, contact Ladhani Metal Corporation today

DIN 2568 Duplex Steel Flanges PN 64 are high-performance threaded flanges manufactured from premium duplex stainless steel, engineered to provide superior strength and corrosion resistance in demanding high-pressure environments. Designed in accordance with DIN 2568 standards, these flanges combine the benefits of both austenitic and ferritic stainless steels, delivering excellent mechanical properties, exceptional resistance to stress corrosion cracking, and outstanding durability in aggressive media. Ladhani Metal Corporation is a leading manufacturer and exporter of duplex flanges, supplying components that meet stringent international quality and dimensional standards. The threaded design offers efficient, weld-free assembly and disassembly, making these flanges ideal for systems that require easy maintenance access in chemically harsh or offshore environments. Pressure Rating: • PN 64 (64 bar / 928 psi): Specially designed for use in high-pressure applications involving corrosive media, temperature fluctuations, and mechanical stress. Flange Types: • Threaded (Screwed) Flanges Enable quick connection and removal, suitable for pipelines and assemblies requiring periodic inspection or replacement. • Raised Face (RF) Flanges Enhance sealing performance in high-pressure environments by focusing gasket compression. • Flat Face (FF) Flanges Used in conjunction with flat-faced valves or equipment, especially where gasket alignment and load distribution are crucial. • Forged Threaded Flanges Deliver high strength, superior pressure resistance, and dimensional precision. • Custom-Machined Flanges Offered in a wide variety of sizes, face types, and duplex steel grades to meet specific project requirements. Available Duplex Grades and Composition: 1. Standard Duplex Stainless Steel Composition: • Chromium (Cr): 21.0 – 23.0% • Nickel (Ni): 4.5 – 6.5% • Molybdenum (Mo): 2.5 – 3.5% • Nitrogen (N): 0.08 – 0.20% • Carbon (C): ≤ 0.030% Applications: Commonly used in chemical processing, marine systems, and power generation due to its excellent resistance to pitting, crevice corrosion, and chloride-induced stress corrosion cracking. Applications of DIN 2568 Duplex Flanges: • Offshore and Marine Engineering: Used in subsea equipment, pipelines, and ballast systems exposed to chloride-rich environments. • Chemical Processing Plants: Withstands corrosive acids, alkalis, and solvents commonly encountered in aggressive chemical processes. • Desalination and Water Treatment: Used in high-salinity applications, such as RO systems and brine discharge lines. • Pulp and Paper Industry: Resists acidic liquors and bleach chemicals in harsh production environments. • Oil and Gas Industry: Employed in pipelines, separators, and injection systems operating under high pressure and exposure to sour service. Key Features: • Designed to DIN 2568 standards • Rated for PN 64 high-pressure service • Combines high mechanical strength and corrosion resistance • Threaded design supports easy, non-welded installation and maintenance • Excellent resistance to pitting, crevice corrosion, and chloride stress cracking • Supplied with full material traceability, test certificates, and quality documentation • Available with custom coatings, surface finishes, and machining options Conclusion: DIN 2568 Duplex Steel Flanges PN 64 from Ladhani Metal Corporation offer a robust and reliable solution for high-pressure, corrosive, and mechanically demanding systems. Their dual-phase microstructure ensures superior performance across a wide range of industrial applications. For custom dimensions, material consultations, or technical assistance, contact Ladhani Metal Corporation today.