DIN 2576 Carbon Steel Flanges PN 10 are slip-on type flanges manufactured in accordance with the DIN 2576 standard, suitable for piping systems operating under low to moderate pressures. Made from high-quality carbon steel, these flanges offer good mechanical strength and are cost-effective solutions for a wide range of industrial applications where corrosion resistance is not the primary concern. The slip-on design allows easy fitting over the pipe and facilitates welding on both the inner and outer edges, ensuring reliable and leak-proof connections. Ladhani Metal Corporation is a reputed manufacturer and global supplier of carbon steel flanges, delivering components that comply with international quality and dimensional standards. DIN 2576 carbon steel flanges are widely used in general-purpose piping systems across industries such as oil and gas, power generation, HVAC, water treatment, and process industries. Pressure Rating: • PN 10 (10 bar / 145 psi): Suitable for use in low to medium pressure systems with stable operational demands. Flange Types: • Slip-On Flanges These flanges slide over the pipe end and are welded on both sides, allowing for simple installation and strong mechanical joints. • Flat Face (FF) Flanges Designed to mate with flat gaskets and flat surfaces, suitable for systems involving cast iron or non-metallic components. Carbon Steel Grades and Composition: Common Grades: • ASTM A105 (Forged Carbon Steel) • ASTM A516 Grade 70 (Pressure Vessel Quality Steel) • IS 2062 (Structural Carbon Steel) Typical Composition (ASTM A105): • Carbon (C): 0.35% max • Manganese (Mn): 0.60 – 1.05% • Phosphorus (P): 0.035% max • Sulfur (S): 0.040% max • Silicon (Si): 0.10 – 0.35% Applications: DIN 2576 carbon steel flanges are preferred in systems where high strength is required and the risk of corrosion is minimal or controlled through external protection (e.g., coatings or linings). Common applications include: • Oil and Gas Transmission Used in pipelines and flowlines where moderate pressures are involved. • Power Plants Suitable for steam, water, and air systems in thermal and hydroelectric power stations. • Water Treatment and Distribution Employed in clean water and wastewater systems, including pumping stations and storage tanks. • HVAC Systems Utilized in heating, ventilation, and air conditioning ducting and piping. • Chemical and Petrochemical Applied in non-corrosive fluid handling and auxiliary systems. • Structural and Fabrication Works Used in non-pressure retaining structural supports and frames. Key Features: • Manufactured to DIN 2576 standards • PN 10 pressure rating for medium-duty applications • Cost-effective and mechanically strong • Available in a variety of carbon steel grades • Slip-on design offers ease of installation and alignment • Flat face design compatible with flat gaskets and soft materials • Ideal for industrial sectors with controlled or minimal corrosion environments • Custom drilling, dimensions, and surface treatments available Conclusion: DIN 2576 Carbon Steel Flanges PN 10 by Ladhani Metal Corporation offer a practical and economical solution for low to moderate pressure piping systems. With reliable performance, ease of installation, and availability in various carbon steel grades, these flanges are suited for a broad range of applications in power, water, oil and gas, and infrastructure industries. For detailed specifications, material compatibility, or project-based orders, contact Ladhani Metal Corporation today.

DIN 2576 Super Duplex Flanges PN 10 are high-performance, slip-on flanges manufactured from super duplex stainless steel, designed for piping systems operating under low to medium pressures. Produced in accordance with the DIN 2576 standard, these flanges offer exceptional mechanical strength combined with superior corrosion resistance, making them ideal for highly aggressive and chloride-laden environments. The slip-on design facilitates easy placement over the pipe and enables secure welding, ensuring precise alignment and a reliable seal across various industrial applications. Ladhani Metal Corporation is a trusted manufacturer and global supplier of super duplex steel flanges, providing products that meet stringent international standards in terms of dimensions, metallurgy, and performance. DIN 2576 super duplex flanges are especially valued in industries where resistance to pitting, crevice corrosion, and stress corrosion cracking is critical, including marine, chemical, and wastewater systems. Pressure Rating: • PN 10 (10 bar / 145 psi): Designed for moderate-pressure systems demanding long-term durability in corrosive environments. Flange Types: • Slip-On Flanges These flanges slide over the pipe and are welded on both sides, offering ease of installation and secure mechanical performance. • Flat Face (FF) Flanges Designed for use with flat gaskets and mating surfaces, these flanges are ideal for applications involving non-metallic or cast components. Super Duplex Stainless Steel Grades and Composition: Super Duplex 2507 (UNS S32750) Composition: • Chromium (Cr): 24.0 – 26.0% • Nickel (Ni): 6.0 – 8.0% • Molybdenum (Mo): 3.0 – 5.0% • Nitrogen (N): 0.24 – 0.32% • Iron (Fe): Balance Applications: Super Duplex 2507 delivers superior yield strength and corrosion resistance, particularly in extreme environments. It is commonly used in subsea equipment, chemical containment, high-pressure systems, and offshore platforms exposed to seawater and chlorides. Applications of DIN 2576 Super Duplex Flanges: • Offshore and Marine Engineering Well-suited for seawater cooling systems, risers, and structural elements exposed to marine conditions. • Chemical and Petrochemical Industries Ideal for conveying highly corrosive fluids, acids, and chlorides in reactors and pipelines. • Water Treatment and Desalination Applied in reverse osmosis systems, brine piping, and high-salinity water circuits requiring enhanced corrosion resistance. • Pulp and Paper Industry Offers protection against aggressive bleaching agents and chemical fluids under pressurized conditions. • Oil and Gas Used in critical systems like separators, manifolds, and sour gas applications. • Structural and Pressure Vessel Fabrication Preferred for tanks and pressure vessels operating under corrosive and mechanical stress. Key Features: • Fully compliant with DIN 2576 standard specifications • PN 10 pressure rating for use in moderate-pressure applications • Superior resistance to chloride-induced pitting, crevice corrosion, and stress corrosion cracking • High mechanical strength reduces material thickness and overall system weight • Manufactured using Super Duplex 2507 and other super duplex alloys • Slip-on design ensures straightforward alignment and welding • Flat face variants suitable for a wide range of gaskets and connection types • Widely used across marine, chemical, oil and gas, and water treatment sectors • Custom sizes, face configurations, and finishes available on request Conclusion: DIN 2576 Super Duplex Flanges PN 10 by Ladhani Metal Corporation offer exceptional strength and corrosion resistance for highly demanding industrial environments. Available in Super Duplex 2507 and other super duplex grades, these flanges ensure reliable performance in systems facing high salinity, pressure, and temperature. For technical guidance, grade selection, or customized project solutions, reach out to Ladhani Metal Corporation today.

DIN 2576 Duplex Flanges PN 10 are robust, slip-on flanges engineered from duplex stainless steel, designed for piping systems operating under low to medium pressures. Manufactured according to the DIN 2576 standard, these flanges combine high mechanical strength with excellent corrosion resistance, particularly in chloride-rich and aggressive chemical environments. The slip-on configuration allows for simple positioning over the pipe and secure welding, ensuring accurate alignment and strong sealing integrity in a variety of industrial applications. Ladhani Metal Corporation is a renowned manufacturer and global exporter of duplex steel flanges, offering products that conform to international specifications in terms of dimensions, metallurgy, and performance. DIN 2576 duplex flanges are especially valued in industries requiring resistance to pitting, crevice corrosion, and stress corrosion cracking, including offshore, chemical, and wastewater systems. Pressure Rating: • PN 10 (10 bar / 145 psi): Suitable for moderate-pressure systems requiring long-term performance in harsh environments. Flange Types: • Slip-On Flanges Designed to slide over the pipe and be welded on both sides, these flanges offer easy installation and secure mechanical integrity. • Flat Face (FF) Flanges Used in conjunction with flat gaskets and flat mating surfaces, ideal for connections involving non-metallic or cast components. Duplex Stainless Steel Grades and Composition: Duplex 2205 (UNS S32205 / S31803) Composition: • Chromium (Cr): 21.0 – 23.0% • Nickel (Ni): 4.5 – 6.5% • Molybdenum (Mo): 2.5 – 3.5% • Nitrogen (N): 0.14 – 0.20% • Iron (Fe): Balance Applications: Duplex 2205 offers twice the yield strength of conventional stainless steels with superior resistance to chloride-induced corrosion. Common applications include chemical processing, desalination, marine systems, and structural components in offshore platforms. Applications of DIN 2576 Duplex Flanges: • Offshore and Marine Engineering Ideal for seawater cooling systems, risers, and structural supports exposed to harsh marine environments. • Chemical and Petrochemical Industries Used in systems handling aggressive acids, chlorides, and solvents where standard stainless steels are insufficient. • Water Treatment and Desalination Applied in brine systems, high-salinity piping, and reverse osmosis plants for their resistance to pitting and scaling. • Pulp and Paper Industry Resists corrosion from bleaching chemicals and process fluids under high pressure. • Oil and Gas Suitable for pressure control systems, separators, and sour service applications. • Structural and Pressure Vessel Fabrication Used in tanks, pressure vessels, and piping subjected to mechanical and corrosive stress. Key Features: • Compliant with DIN 2576 standards • PN 10 pressure rating for moderate-pressure use • Excellent resistance to chloride stress corrosion, pitting, and crevice corrosion • High strength-to-weight ratio, reducing component size and cost • Available in Duplex 2205, Super Duplex 2507, and other custom grades • Slip-on design ensures quick and accurate pipe connections • Flat face options compatible with a variety of gaskets and materials • Ideal for chemical, marine, oil and gas, and water treatment sectors • Custom dimensions, face types, and surface finishes available Conclusion: DIN 2576 Duplex Flanges PN 10 from Ladhani Metal Corporation provide outstanding durability and corrosion resistance for challenging industrial environments. With availability in Duplex 2205 and Super Duplex 2507, these flanges are a reliable solution for systems exposed to high chlorides, pressure, and temperature. For technical specifications, grade selection, or project-specific orders, contact Ladhani Metal Corporation today.

DIN 2576 Monel Flanges PN 10 are high-integrity, slip-on flanges manufactured from corrosion-resistant nickel-copper alloys, specifically designed for demanding low to medium-pressure applications. Compliant with the DIN 2576 standard, these flanges provide exceptional resistance to seawater, acids, alkalis, and corrosive chemicals, making them ideal for highly corrosive industrial environments. The slip-on design allows the flange to be positioned over the pipe and welded in place, ensuring precise alignment and long-term mechanical stability. Ladhani Metal Corporation is a trusted manufacturer and international supplier of Monel flanges, producing components that meet rigorous dimensional, metallurgical, and quality standards. DIN 2576 Monel flanges are widely used in marine, chemical, and oil and gas industries, where material durability and corrosion resistance are critical. Pressure Rating: • PN 10 (10 bar / 145 psi): Designed for systems requiring stable operation under moderate pressures in fluid and gas transport environments. Flange Types: • Slip-On Flanges Facilitate easy assembly by slipping over the pipe and welding on both sides to ensure a leak-proof and secure joint. • Flat Face (FF) Flanges Designed for use with flat gaskets and mating surfaces, offering even pressure distribution and sealing performance, particularly with brittle or non-metallic materials. Monel Grades and Composition: Monel 400 (UNS N04400) Composition: • Nickel (Ni): ≥ 63.0% • Copper (Cu): 28.0 – 34.0% • Iron (Fe), Manganese (Mn), Silicon (Si), Carbon (C): Trace amounts Applications: Monel 400 is well-known for its outstanding resistance to seawater, hydrofluoric acid, sulfuric acid, and alkalis. It is widely used in marine engineering, chemical processing, and heat exchangers. Monel K500 (UNS N05500) Composition: • Nickel (Ni): ≥ 63.0% • Copper (Cu): ~30.0% • Aluminum (Al): 2.3 – 3.15% • Titanium (Ti): 0.35 – 0.85% Applications: Monel K500 offers the same corrosion resistance as Monel 400 but with significantly higher strength and hardness due to age-hardening. It is ideal for high-stress applications such as pump shafts, valve components, and marine fasteners. Applications of DIN 2576 Monel Flanges: • Marine and Offshore Engineering Ideal for seawater exposure, ballast systems, and structural applications in shipbuilding and offshore platforms. • Chemical and Petrochemical Processing Used in piping systems exposed to strong acids, caustics, and other corrosive agents. • Oil and Gas Industry Suitable for sour gas (H₂S) environments, offshore drilling equipment, and refining systems. • Heat Exchangers and Condensers Monel's thermal conductivity and corrosion resistance make it suitable for tube sheets and connecting flanges. • Power Generation Applied in cooling systems, boiler feedwater lines, and other aggressive service environments. • Aerospace and Defense Used in fuel and hydraulic systems where resistance to corrosion and stress cracking is required. Key Features: • Manufactured according to DIN 2576 specification • PN 10 pressure rating for low to medium-pressure fluid systems • Exceptional resistance to seawater, acids, alkalis, and chlorides • Available in Monel 400 and Monel K500 grades • Slip-on design enables easy installation and welding • Flat face versions for compatibility with flat gaskets and brittle materials • Excellent mechanical properties and corrosion resistance • Custom dimensions, finishes, and face types available upon request Conclusion: DIN 2576 Monel Flanges PN 10 from Ladhani Metal Corporation deliver high corrosion resistance and mechanical strength for aggressive environments where conventional materials fail. With availability in Monel 400 and K500 grades, these flanges are suitable for marine, oil & gas, and chemical applications. For technical support, project consultation, or custom orders, contact Ladhani Metal Corporation today.

DIN 2576 Inconel Flanges PN 10 are high-performance, slip-on flanges engineered from nickel-chromium-based superalloys designed for use in corrosive and high-temperature industrial environments. Manufactured to the DIN 2576 standard, these flanges are well-suited for low to medium-pressure applications requiring exceptional resistance to oxidation, thermal stress, and chemical attack. The slip-on design allows the flange to slide over the pipe and be welded in place, providing accurate alignment and strong mechanical stability. Ladhani Metal Corporation is a trusted manufacturer and exporter of Inconel flanges, offering precision-engineered components that meet international quality and dimensional standards. DIN 2576 Inconel flanges are ideal for challenging applications in aerospace, chemical processing, power generation, and marine systems. Pressure Rating: • PN 10 (10 bar / 145 psi): Suitable for low to moderate pressure operations, delivering reliable sealing and long-term performance in fluid and gas transport systems. Flange Types: • Slip-On Flanges Designed to fit over the pipe and be welded on both sides, offering simplified installation and secure mechanical performance. • Flat Face (FF) Flanges Used with flat gaskets and mating surfaces, providing uniform gasket compression and sealing integrity, especially with brittle or non-metallic components. Inconel Grades and Composition: Inconel 600 (UNS N06600) Composition: • Nickel (Ni): ≥ 72.0% • Chromium (Cr): 14.0 – 17.0% • Iron (Fe): 6.0 – 10.0% • Trace elements: Manganese, Silicon, Copper Applications: Inconel 600 offers excellent resistance to high-temperature oxidation, chloride-ion stress corrosion cracking, and acidic environments. Commonly used in furnace components, chemical process heaters, and nuclear reactors. Inconel 625 (UNS N06625) Composition: • Nickel (Ni): ≥ 58.0% • Chromium (Cr): 20.0 – 23.0% • Molybdenum (Mo): 8.0 – 10.0% • Niobium (Nb) + Tantalum (Ta): 3.15 – 4.15% Applications: Inconel 625 is known for its outstanding corrosion resistance in harsh conditions, including seawater, acid baths, and high-pressure environments. It is used extensively in marine hardware, offshore oil and gas systems, and aerospace exhaust systems. Inconel 718 (UNS N07718) Composition: • Nickel (Ni): 50.0 – 55.0% • Chromium (Cr): 17.0 – 21.0% • Iron (Fe): Balance • Niobium (Nb): 4.75 – 5.5% • Molybdenum (Mo): 2.8 – 3.3% • Titanium (Ti) + Aluminum (Al): ~1% Applications: Inconel 718 is a high-strength, precipitation-hardenable alloy with excellent corrosion and oxidation resistance. It performs well in cryogenic to high-temperature environments and is widely used in jet engines, high-temperature bolting, power generation turbines, and downhole oil and gas equipment. Applications of DIN 2576 Inconel Flanges: • Chemical and Petrochemical Processing Ideal for use in systems handling strong acids, solvents, and oxidizing agents at elevated temperatures. • Power Generation Used in heat exchangers, boiler systems, and turbine piping exposed to thermal cycling and steam corrosion. • Marine and Offshore Industries Excellent choice for seawater-cooled systems, marine risers, and subsea components due to its resistance to pitting and crevice corrosion. • Aerospace and Defense Applied in engine exhausts, combustion chambers, and other high-heat zones requiring structural integrity under extreme conditions. • Nuclear and High-Risk Industrial Systems Reliable in applications with radioactive or caustic media, where corrosion and temperature resistance are critical. Key Features: • Manufactured to DIN 2576 standard • PN 10 pressure rating suitable for moderate-pressure piping systems • Outstanding resistance to corrosion, oxidation, and high temperatures • Available in Inconel 600, 625, and other grades upon request • Slip-on design for ease of welding and proper pipe alignment • Flat face options for compatibility with a variety of gaskets and joint materials • Ideal for harsh chemical, thermal, and marine environments • Custom sizes, face types, and finishes available as per project requirements Conclusion: DIN 2576 Inconel Flanges PN 10 from Ladhani Metal Corporation are engineered for the toughest industrial environments, delivering performance, durability, and corrosion resistance where stainless steel or other materials may fail. For material selection support, technical data sheets, or customized orders, contact Ladhani Metal Corporation today.

DIN 2576 Titanium Flanges PN 10 are premium-quality, slip-on flanges crafted from corrosion-resistant titanium alloys, designed for use in low to medium-pressure piping systems. Produced according to the DIN 2576 standard, these flanges offer exceptional corrosion resistance, lightweight performance, and structural reliability, especially in chemically aggressive and marine environments. The slip-on design allows the flange to slide over the pipe and be welded into place, ensuring proper alignment and mechanical strength across diverse industrial sectors. Ladhani Metal Corporation is a globally recognized manufacturer and exporter of titanium flanges, supplying components that meet stringent international standards for quality, dimension, and performance. DIN 2576 titanium flanges are well-suited for demanding applications where resistance to chlorides, seawater, and strong oxidizers is critical. Pressure Rating: • PN 10 (10 bar / 145 psi): Designed for systems operating under low to moderate pressure, ensuring safe and long-term functionality in fluid, gas, and chemical transport systems. Flange Types: • Slip-On Flanges Designed to slip over the pipe and be welded on both the inside and outside, these flanges provide ease of installation and dependable structural support. • Flat Face (FF) Flanges Used with flat gaskets and flat mating surfaces to ensure proper load distribution and effective sealing, especially when paired with non-metallic or cast components. Titanium Grades and Composition: Titanium Grade 2 (UNS R50400) Composition: • Titanium (Ti): ≥ 98.5% • Iron (Fe), Oxygen (O), Carbon (C), Nitrogen (N), Hydrogen (H): Trace amounts Applications: Commercially pure titanium Grade 2 is known for its excellent corrosion resistance, formability, and weldability. It is widely used in chemical processing, desalination plants, and medical equipment. Titanium Grade 5 (Ti-6Al-4V, UNS R56400) Composition: • Titanium (Ti): Balance • Aluminum (Al): 5.5 – 6.75% • Vanadium (V): 3.5 – 4.5% Applications: Grade 5 titanium offers superior strength and corrosion resistance, making it ideal for high-performance applications such as aerospace systems, offshore platforms, and high-stress piping environments. Applications of DIN 2576 Titanium Flanges: • Chemical and Petrochemical Industries Ideal for systems handling corrosive fluids, acids, and solvents, especially in chlorinated or oxidizing environments. • Desalination and Water Treatment Extensively used in seawater pipelines, brine systems, and high-purity water processing due to titanium’s resistance to chloride attack. • Marine and Offshore Engineering Suitable for shipbuilding, underwater pipelines, and ballast systems where corrosion from saltwater is a major concern. • Aerospace and Defense Used in lightweight, high-strength piping assemblies and fuel systems exposed to extreme environments. • Medical and Pharmaceutical Equipment Preferred for its biocompatibility and corrosion resistance in sterile and hygienic fluid handling systems. • High-Temperature and Reactive Environments Titanium Grade 5 flanges are used in systems exposed to thermal cycling, strong oxidizers, or aggressive chemical media. Key Features: • Manufactured in accordance with DIN 2576 standard • PN 10 pressure rating for moderate pressure systems • Exceptional resistance to corrosion, especially from seawater and chemicals • Available in Titanium Grade 2 and Grade 5 • Slip-on design for easy installation and accurate alignment • Flat face options compatible with specific gaskets and joint types • Lightweight yet mechanically strong • Suitable for marine, aerospace, medical, and chemical processing industries • Custom sizes, face types, and surface finishes available upon request Conclusion: DIN 2576 Titanium Flanges PN 10 from Ladhani Metal Corporation offer an ideal solution for industries requiring high corrosion resistance and durability in low to medium-pressure systems. With options in commercially pure and alloyed titanium, these flanges are engineered to meet the most demanding applications. For technical consultation, custom designs, or ordering information, contact Ladhani Metal Corporation today.

DIN 2576 Stainless Steel Flanges PN 10 are high-quality, slip-on flanges manufactured from corrosion-resistant stainless steel, designed for use in low to medium-pressure piping systems. Produced according to the DIN 2576 standard, these flanges offer reliable sealing, ease of installation, and long-term durability in environments involving water, steam, air, oil, and chemical fluids. The slip-on design allows the flange to slide over the pipe and be welded into place, ensuring accurate alignment and structural integrity in a wide range of industrial applications. Ladhani Metal Corporation is a recognized manufacturer and global exporter of stainless steel flanges, delivering products that meet international quality, dimensional, and performance standards. DIN 2576 flanges provide excellent mechanical strength and corrosion resistance, making them ideal for use in chemical plants, water treatment systems, and general process industries. Pressure Rating: • PN 10 (10 bar / 145 psi): Designed for systems operating under low to moderate pressure, offering dependable performance in industrial fluid and gas transport. Flange Types: • Slip-On Flanges Designed to slip over the pipe and be welded on both the inside and outside, these flanges provide easy installation and solid structural support. • Flat Face (FF) Flanges Used with flat gaskets and flat mating surfaces to ensure even gasket compression and proper load distribution, especially when joining with non-metallic components or cast iron. Stainless Steel Grades and Composition: Stainless Steel 304 (UNS S30400) Composition: • Chromium (Cr): 18.0 – 20.0% • Nickel (Ni): 8.0 – 10.5% • Carbon (C): ≤ 0.08% • Manganese (Mn), Silicon (Si), Phosphorus (P), Sulfur (S): Trace amounts • Iron (Fe): Balance Applications: 304 stainless steel offers good corrosion resistance, formability, and weldability, making it suitable for applications in food processing, water piping, and light chemical handling. Stainless Steel 316 (UNS S31600) Composition: • Chromium (Cr): 16.0 – 18.0% • Nickel (Ni): 10.0 – 14.0% • Molybdenum (Mo): 2.0 – 3.0% • Carbon (C): ≤ 0.08% • Iron (Fe): Balance Applications: 316 stainless steel is ideal for more aggressive environments, offering superior resistance to chlorides, acids, and marine exposure. Common applications include chemical plants, pharmaceutical systems, and marine piping. Stainless Steel 321 (UNS S32100) Composition: • Chromium (Cr): 17.0 – 19.0% • Nickel (Ni): 9.0 – 12.0% • Titanium (Ti): ≥ 5x(C) minimum • Carbon (C): ≤ 0.08% • Iron (Fe): Balance Applications: 321 stainless steel is stabilized with titanium to resist intergranular corrosion after welding. It is commonly used in high-temperature applications such as exhaust systems, heat exchangers, furnace parts, and thermal fluid piping in the chemical and petrochemical industries. Applications of DIN 2576 Stainless Steel Flanges: • Chemical and Petrochemical Industries Used in piping systems that handle corrosive chemicals, acids, and solvents, ensuring safe and long-lasting operation. • Water Treatment and Distribution Widely used in pipelines for potable water, wastewater, and desalination plants due to their corrosion resistance and hygienic properties. • Food and Beverage Processing Ideal for sanitary fluid handling systems, where stainless steel ensures contamination-free and easy-to-clean connections. • Marine and Offshore Applications Suitable for piping exposed to seawater and atmospheric corrosion, especially in deck and ballast systems. • General Industrial Use Used in heating systems, compressed air lines, fire protection networks, and process piping. • High-Temperature Services Grade 321 stainless steel is preferred in applications involving thermal cycling and continuous elevated temperatures, such as refinery piping and power plant components. Key Features: • Manufactured according to DIN 2576 standard • PN 10 pressure rating for low to medium-pressure systems • Excellent corrosion resistance and mechanical strength • Available in stainless steel 304, 316, 321, and other grades • Slip-on design ensures easy welding and alignment • Flat face options available for specific gasket and joint requirements • Suitable for chemical, marine, thermal, and general industrial applications • Available in customized sizes, face types, and surface finishes Conclusion: DIN 2576 Stainless Steel Flanges PN 10 from Ladhani Metal Corporation provide reliable, corrosion-resistant performance for a wide range of industrial systems operating under moderate pressure. For technical support, material selection, or custom orders, contact Ladhani Metal Corporation today. 📞 Contact Ladhani Metal Corporation Website: https://www.ladhanimetal.in/ https://www.ladhanimetal.com/ Email: info@ladhanimetals.com Request a Quote: Custom dimensions, materials, and finishes available upon request.

DIN 2634 carbon steel flanges PN 25 are high-strength weld neck flanges manufactured according to the DIN 2634 standard. Specifically designed for use in high-pressure piping systems operating up to 25 bar (362 psi), these flanges offer excellent mechanical performance and are suitable for a wide range of industrial applications. Manufactured from quality carbon steel, they provide strong, durable, and cost-effective solutions for systems where corrosion resistance requirements are moderate but structural integrity is critical. Ladhani Metal Corporation is a recognized manufacturer and global supplier of carbon steel flanges, known for precision engineering, strict adherence to international standards, and advanced production capabilities. Each flange is subject to comprehensive testing and inspection to ensure reliability and consistent performance under demanding operating conditions. Pressure Rating: • PN 25 (25 bar / 362 psi): Suitable for medium to high-pressure applications where strength and impact resistance are essential. Flange Type: • Weld Neck Flanges Designed with a tapered hub to ensure smooth transition from flange to pipe, weld neck flanges are ideal for systems experiencing frequent thermal cycling, pressure fluctuations, and mechanical stress. • Flat Face (FF) Flanges Recommended for use with gaskets made from soft materials or when connecting to cast iron components, flat face flanges ensure even gasket compression and reliable sealing performance. Carbon Steel Grades and Typical Composition: Carbon Steel (ASTM A105 / C22.8 equivalent) – Forged Carbon Steel • Carbon (C): ≤ 0.35% • Manganese (Mn): 0.60 – 1.05% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.040% • Silicon (Si): 0.10 – 0.35% • Iron (Fe): Balance Applications: Commonly used in oil and gas, petrochemical, water transmission, and power generation industries, especially in applications where high mechanical strength and pressure handling are more critical than corrosion resistance. Applications of DIN 2634 Carbon Steel Flanges PN 25: • Oil and Gas Pipelines Widely used in upstream and downstream systems for fluid transport under high pressure. • Petrochemical and Refining Plants Efficiently handles high-pressure flow systems involving hydrocarbons and steam. • Power Plants and Boiler Systems Suited for high-pressure steam and water lines, offering excellent tensile strength and fatigue resistance. • Water and Wastewater Infrastructure Used in municipal and industrial pipelines requiring cost-effective, robust flange connections. • General Industrial Systems Applicable in a wide range of mechanical systems and processing plants handling non-corrosive or mildly corrosive media. Key Features: • Compliant with DIN 2634 pressure and dimensional standards • PN 25 rating ensures compatibility with high-pressure pipelines • High tensile and yield strength for demanding structural requirements • Weld neck design enhances resistance to vibration and thermal expansion • Cost-effective solution for pressure-bearing connections • Available in standard and custom sizes, surface finishes, and pressure ratings • Heat treatment and coating options available upon request Conclusion: DIN 2634 carbon steel flanges PN 25 from Ladhani Metal Corporation provide a robust and economical solution for high-pressure systems where mechanical performance is essential. Their strength, reliability, and adaptability make them a preferred choice across industries such as oil and gas, power generation, and water infrastructure. For technical specifications, custom configurations, or pricing, contact Ladhani Metal Corporation today.

DIN 2634 super duplex steel flanges PN 25 are high-performance weld neck flanges designed in accordance with the DIN 2634 standard. These flanges are engineered for high-pressure systems operating up to 25 bar (362 psi) and are manufactured from premium super duplex stainless steel grades. Known for their superior strength, excellent corrosion resistance, and enhanced resistance to stress corrosion cracking and pitting, super duplex flanges are ideally suited for demanding industrial environments. Their robust mechanical properties make them a reliable choice for aggressive service conditions and high-pressure applications. Ladhani Metal Corporation is a global leader in the manufacturing and supply of super duplex steel flanges. With advanced production facilities, precision engineering capabilities, and rigorous quality assurance practices, the company ensures that each flange meets the highest standards of safety, durability, and performance under extreme conditions. Pressure Rating: • PN 25 (25 bar / 362 psi): Designed for systems requiring high strength and exceptional corrosion resistance under elevated pressure conditions. Flange Type: • Weld Neck Flanges Featuring a tapered hub design, weld neck flanges deliver optimal stress distribution and secure, leak-free connections in systems exposed to thermal and mechanical loading. • Flat Face (FF) Flanges Recommended for use with softer gasket materials or systems incorporating cast iron components, flat face flanges provide uniform gasket compression and reliable sealing. Super Duplex Steel Grades and Typical Composition: Super Duplex Steel (UNS S32750 / S32760) – Ferritic-Austenitic Stainless Steel • Chromium (Cr): 24.0 – 26.0% • Nickel (Ni): 6.0 – 8.0% • Molybdenum (Mo): 3.0 – 5.0% • Nitrogen (N): 0.2 – 0.3% • Iron (Fe): Balance Applications: Widely used in environments where high strength, corrosion resistance, and resistance to chloride-induced stress corrosion cracking are essential, such as offshore platforms, chemical plants, and desalination facilities. Applications of DIN 2634 Super Duplex Steel Flanges PN 25: • Offshore and Subsea Installations Withstand chloride-rich marine environments, offering long-term durability and resistance to seawater corrosion. • Chemical and Petrochemical Processing Suitable for handling aggressive chemicals, acids, and solvents under high pressure and temperature conditions. • Desalination and Water Treatment Plants Perform reliably in saline and brine-rich environments with superior resistance to pitting and crevice corrosion. • Power Generation and Heat Exchangers Offer excellent performance in high-temperature, high-pressure applications requiring strength and corrosion protection. • Pulp and Paper Industry Operate effectively in harsh chemical environments including bleach and acidic processing streams. Key Features: • Manufactured to DIN 2634 specifications for dimensional accuracy and pressure handling • PN 25 pressure class supports high-performance applications • Superior resistance to localized corrosion including pitting and stress corrosion cracking • High strength-to-weight ratio and excellent mechanical properties • Weld neck design ensures structural integrity and resistance to fatigue • Available in both UNS S32750 and S32760 super duplex grades • Customizable in size, pressure class, and surface finish upon request Conclusion: DIN 2634 super duplex steel flanges PN 25 from Ladhani Metal Corporation are engineered to deliver top-tier performance in environments where mechanical strength and corrosion resistance are non-negotiable. Their robust construction and excellent durability make them ideal for marine, chemical, and industrial applications operating under high pressure. For detailed specifications, project consultations, or a custom quote, contact Ladhani Metal Corporation today.