Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are expertly engineered components designed to extend the life of boiler and heat exchanger tubes by protecting them against high-temperature oxidation, flue gas erosion, and mechanical damage. These shields are essential in power generation, petrochemical, and process industries where tube integrity is critical for system reliability and operational safety. 1Cr18Ni9Ti Half Round Tube Shield The 1Cr18Ni9Ti Half Round Tube Shield is a semi-cylindrical protective cover manufactured from titanium-stabilized stainless steel grade 1Cr18Ni9Ti. This material is equivalent to AISI 321 and is known for its excellent resistance to intergranular corrosion, especially after welding or prolonged high-temperature exposure. The addition of titanium in the alloy stabilizes the microstructure and prevents chromium carbide precipitation, making it ideal for thermal systems operating between 400°C and 900°C. The shield’s half-round design allows for quick and secure installation over existing tubes, providing durable protection in aggressive industrial environments. Chemical Composition of 1Cr18Ni9Ti – Titanium-Stabilized Austenitic Stainless Steel • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 17.0 – 19.0% • Nickel (Ni): 8.0 – 11.0% • Titanium (Ti): ≥ 5 × C content • Iron (Fe): Balance Uses • Boiler Tube Protection – Guards tubes from high-temperature scaling and corrosion in superheater and reheater sections exposed to combustion gases. • Heat Exchanger Tubing – Reduces risk of thermal fatigue and corrosion in steam or process exchangers operating in elevated temperature zones. • Furnace Tube Shielding – Ideal for protecting radiant and convection zone tubes from oxidation and mechanical wear in refinery and chemical furnaces. • Petrochemical Piping – Prevents tube degradation in reformers, heaters, and gas coolers exposed to carburizing and oxidizing atmospheres. • Power Plant Steam Systems – Shields tubing in HRSGs and utility boilers operating under high-temperature and fluctuating load conditions. Features • Excellent Intergranular Corrosion Resistance – Titanium addition prevents carbide precipitation, making the shield ideal for welded and heat-cycled environments. • High-Temperature Stability – Performs effectively up to 850°C with consistent mechanical strength and oxidation resistance. • Austenitic Structure – Offers good ductility, toughness, and resistance to thermal shock and creep deformation. • Half-Round Precision Fit – Custom-formed to match tube diameters, ensuring tight coverage and easy field installation with clamps or welds. • Corrosion Protection – Withstands acidic flue gases, steam condensates, and other corrosive industrial byproducts. • Finishing Options – Supplied in bright annealed, pickled, or passivated finishes to suit operational and aesthetic needs. • Custom Dimensions – Available in various wall thicknesses, lengths, and diameters to suit different system designs and operating conditions. Applications • Thermal and Nuclear Power Plants – Protects boiler and superheater tubes from high-temperature stress and oxidation in base-load and cyclic operations. • Oil Refineries – Applied in fired heaters and reformers where tube protection from scale and corrosion is essential for system longevity. • Chemical Process Plants – Guards steam and fluid tubes in reactors and exchangers handling acidic or oxidizing media at high heat. • Fertilizer Industry – Shields ammonia converter and steam reforming tubes subjected to repeated thermal cycling. • Waste-to-Energy and Biomass Plants – Prevents erosion and degradation of tubes in flue gas zones with corrosive combustion byproducts. • Heat Recovery Steam Generators – Used in combined-cycle plants to extend the life of high-temperature steam tubing systems. Conclusion The 1Cr18Ni9Ti Half Round Tube Shield by Ladhani Metal Corporation is a superior-grade solution for tube protection in high-temperature, high-pressure, and corrosive industrial environments. Its titanium-stabilized austenitic structure offers outstanding resistance to intergranular corrosion, making it especially effective in welded applications and thermal systems exposed to fluctuating service conditions. Engineered for durability and precision, these shields help reduce maintenance costs, prevent tube failures, and ensure continuous, efficient system performance. With customizable sizes, expert fabrication, and reliable material traceability, Ladhani Metal Corporation is a trusted partner for advanced tube shielding solutions. For technical consultation, application support, or quotation requests, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are high-precision protective elements designed to safeguard boiler and heat exchanger tubes against mechanical wear, erosion, and high-temperature gas attack. These shields are essential in industrial systems where exposure to thermal cycling, high-velocity gases, and abrasive particles can rapidly degrade unprotected tubing. SS 410 Half Round Tube Shield The SS 410 Half Round Tube Shield is a semi-cylindrical tube protector manufactured using stainless steel grade 410. As a martensitic stainless steel, SS 410 offers a unique combination of good corrosion resistance, high mechanical strength, and excellent wear resistance. It is particularly suitable for environments with moderate corrosion exposure and significant mechanical stress. The half-round shape is precisely formed to ensure a tight fit over exposed tubes, providing a durable and reliable barrier that extends tube service life in industrial boilers, heat exchangers, and process equipment. Chemical Composition of SS 410 – Martensitic Stainless Steel • Carbon (C): 0.08 – 0.15% • Manganese (Mn): ≤ 1.00% • Phosphorus (P): ≤ 0.040% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 11.5 – 13.5% • Nickel (Ni): ≤ 0.75% • Iron (Fe): Balance Uses • Boiler Tube Protection – Provides abrasion and erosion resistance in utility and industrial boilers where tubes face harsh combustion environments. • Heat Exchanger Shielding – Reduces mechanical wear caused by high flow velocities and particulate impact in condensers and evaporators. • Furnace Tube Safeguarding – Protects radiant and convection tubes from scale buildup and flame impingement in high-temperature furnace applications. • Steam and Process Line Protection – Extends the life of piping systems in moderately corrosive environments with mechanical stress. • Air Preheater and Economizer Units – Shields tubes from dust-laden gas erosion in flue gas recovery systems. Features • Excellent Wear Resistance – High hardness and toughness of SS 410 make it ideal for shielding tubes exposed to abrasive flows or soot-blowing operations. • Good Oxidation Resistance – Performs reliably in mildly corrosive and oxidizing environments up to 650°C (1200°F). • High Strength – Provides superior mechanical durability under vibration, pressure, and impact loading conditions. • Easy to Fabricate and Install – Half-round design allows for quick field installation and secure clamping or welding without altering system layout. • Economical Option – Offers a cost-effective tube protection solution where severe corrosion resistance is not critical. • Customization – Available in different thicknesses, diameters, lengths, and surface finishes (pickled or bright annealed). Applications • Thermal Power Plants – Used in boiler and superheater tubes to resist wear from flue gas erosion and thermal fluctuations. • Cement and Steel Industries – Protects tubes in high-wear areas exposed to dust, ash, and scale in kilns, coolers, and furnaces. • Oil Refineries – Applied in areas where high strength is required along with moderate corrosion resistance, such as preheaters or tube bundles. • Chemical Plants – Suitable for process tubes in mildly corrosive environments with strong flow dynamics or steam load cycling. • Pulp and Paper Industry – Shields tubes in recovery and power boilers exposed to high-pressure steam and abrasive residues. • Biomass and Waste-to-Energy Plants – Guards against erosion from fly ash and combustion residues in environmentally demanding systems. Conclusion The SS 410 Half Round Tube Shield from Ladhani Metal Corporation is a robust and reliable solution for protecting critical tube systems subjected to mechanical wear and thermal stress. Its excellent hardness and strength make it especially effective in applications involving high-velocity gas flow, abrasive particles, and fluctuating temperatures. While not suited for highly corrosive environments, SS 410 excels in systems where durability, cost-efficiency, and resistance to erosion are key priorities. With customizable sizing and expert engineering support, Ladhani Metal Corporation ensures dependable, application-specific shielding solutions for a wide range of industries. For technical specifications, fabrication assistance, or pricing inquiries, please contact Ladhani Metal Corporation.

DIN 2545 carbon steel flanges supplied by Ladhani Metal Corporation are designed for use in a variety of industrial applications requiring strength, durability, and resistance to corrosion under moderate temperatures and pressures. These flanges are made from high-quality carbon steel, offering excellent mechanical properties and weldability, making them suitable for both low- and high-pressure systems. With a pressure rating of PN 40, these flanges are built to withstand pressures up to 40 bar, ensuring secure and leak-free connections in demanding applications across different industries, including chemical processing, power generation, and construction. Types of DIN 2545 Carbon Steel Flanges: Flat Face Flanges (FF) – These flanges have a flat sealing surface and are primarily used in low-pressure applications where uniform distribution of sealing force is required. Raised Face Flanges (RF) – These flanges feature a raised surface around the bolt holes, providing enhanced sealing pressure, making them ideal for high-pressure applications. Ring-Type Joint (RTJ) Flanges – These flanges are designed with a groove to accommodate a metal sealing ring, providing a more secure seal for high-pressure systems or environments involving high temperatures. Grades and Chemical Composition: Carbon Steel A105 Chemical Composition: C: 0.35%, Mn: 0.60-0.90%, P: 0.035% max, S: 0.035% max, Si: 0.10-0.35%, Fe: balance A105 is the most commonly used grade of carbon steel for flanges, offering good strength and impact resistance. It is suitable for low to medium-pressure applications and is widely used in the manufacturing of flanges for piping systems, valves, and fittings. This grade is known for its versatility and ease of welding. Carbon Steel A350 LF2 Chemical Composition: C: 0.30%, Mn: 1.00-1.50%, P: 0.035% max, S: 0.035% max, Si: 0.10-0.35%, Fe: balance A350 LF2 is a low-temperature carbon steel grade designed for use in cryogenic and low-temperature applications. It offers good toughness and is resistant to brittle fracture in environments where temperatures are lower than standard carbon steel materials can withstand. A350 LF2 is commonly used in the oil, gas, and power generation industries. PN 40 Pressure Rating: The "PN" rating defines the flange's pressure capacity. PN 40 indicates that the flange is capable of handling pressures up to 40 bar, making it suitable for high-pressure systems in various industrial applications that require secure and durable connections. Applications: 1. Oil and Gas Industry: Pipelines and Transport Systems: Carbon steel flanges are commonly used in oil and gas pipelines to connect sections of pipe, valves, and other components. They provide a reliable seal and are capable of handling high pressures and extreme temperatures. Refineries and Petrochemical Plants: Carbon steel flanges are used in refining processes and in the transportation of crude oil and natural gas. They withstand the mechanical stresses and corrosion from various chemicals. Offshore Platforms: These flanges are used in offshore oil platforms where they handle high-pressure conditions in subsea pipelines and other critical infrastructure. 2. Chemical and Petrochemical Industry: Chemical Processing Equipment: Carbon steel flanges are used in reactors, heat exchangers, and distillation columns where the materials are exposed to high-pressure chemicals. They are preferred in systems that handle neutral or moderately corrosive chemicals. Pipelines for Chemical Transport: Used in chemical plants to transport fluids that are not highly corrosive, carbon steel flanges are durable and reliable in these settings. 3. Power Generation: Steam and Gas Turbines: Carbon steel flanges are widely used in power plants, especially in steam and gas turbines, where high pressure and temperatures are present. Cooling Systems: These flanges are found in cooling water systems, heat exchangers, and other systems where water or air is circulated to cool equipment. 4. Water Treatment Plants: Water Distribution Systems: Carbon steel flanges are commonly used to connect pipes in water distribution systems, especially in municipal water treatment and sewage treatment plants. Desalination Plants: These flanges are also employed in desalination plants, where seawater is converted into fresh water, due to their strength and ability to handle high-pressure environment. Conclusion: Ladhani Metal Corporation ensures the production of these carbon steel flanges meets the highest standards of quality and precision, ensuring long-term durability and reliable performance in even the most demanding applications. Each flange is manufactured according to strict specifications and undergoes thorough testing to guarantee safe and reliable operation in high-pressure environments. #din2545 #din2545flanges #din2545carbonsteelflanges #flanges #flangessupplier

DIN 2527 Titanium Blind Flanges are specialized components used to seal the open ends of pipes, vessels, or other equipment in industrial systems where no further connection is required. Made from Titanium alloys, these flanges offer a combination of high strength, excellent corrosion resistance, and light weight, making them an ideal choice for applications in demanding environments. Manufactured according to the DIN 2527 standard, these flanges ensure high levels of dimensional accuracy, pressure tolerance, and mechanical strength, which are critical for maintaining the integrity of piping systems. Material Composition of Titanium Alloys: Titanium alloys used for DIN 2527 Blind Flanges typically include: Grade 2 Titanium (Commercially Pure Titanium): Titanium (Ti): 99.2% min Iron (Fe): 0.30% max Oxygen (O): 0.25% max Carbon (C): 0.08% max Nitrogen (N): 0.03% max Hydrogen (H): 0.015% max Grade 5 Titanium (Ti-6Al-4V): Titanium (Ti): 90.0% min Aluminum (Al): 6.0% - 7.0% Vanadium (V): 3.5% - 4.5% Iron (Fe): 0.25% max Oxygen (O): 0.20% max Carbon (C): 0.10% max Nitrogen (N): 0.05% max Hydrogen (H): 0.015% max Key Features of DIN 2527 Titanium Blind Flanges: Corrosion Resistance: Titanium is highly resistant to corrosion, especially in chloride, seawater, and acidic environments, making Titanium Blind Flanges ideal for use in marine, chemical, and offshore applications. Titanium alloys offer superior resistance to pitting, crevice corrosion, and stress corrosion cracking, even in extreme environments like high salinity and acidic conditions. High Strength-to-Weight Ratio: Titanium has an excellent strength-to-weight ratio, making it significantly stronger than many steel alloys while being much lighter. This is particularly beneficial in industries where weight reduction is essential, such as aerospace and marine industries. Temperature Resistance: Titanium alloys can withstand high temperatures, with Grade 2 Titanium performing well at up to 400°C (752°F) and Grade 5 Titanium being suitable for continuous service at up to 400°C (752°F) as well, with intermittent exposure to even higher temperatures. Dimensional Accuracy and Pressure Class: DIN 2527 Titanium Blind Flanges are manufactured to precise dimensions, ensuring a secure seal within the piping system. Available in different pressure classes such as PN6, PN10, PN16, etc., ensuring compatibility with a wide range of piping systems. Design Options: Standard Blind Flange (Type A): A solid, circular disc used to seal the end of a pipe or vessel. Commonly used in general applications. Flat-Faced Blind Flange: Features a flat sealing surface, ideal for low-pressure systems. Raised Face Blind Flange: Includes a raised area around the center for improved sealing in higher pressure systems. Ring-Type Joint (RTJ) Blind Flange: Designed with a groove to accommodate a ring-type joint gasket, used for high-pressure applications, particularly in the oil and gas industry. Long Weld Neck Blind Flange: Features an extended neck for welding, providing additional strength and stability, commonly used in high-pressure or high-stress systems. Nominal Diameter: DIN 2527 Titanium Blind Flanges are available in a variety of nominal diameters (DN), typically ranging from DN10 (1/2 inch) up to DN600 (24 inches) or more, based on the application needs.

Product Name: WN Titanium Flanges Standard: ANSI / ASME B16.5 Material: Gr1 Gr2 Gr5 Gr7 Gr12 Unit Price: $25usd/pc-$85usd/pc Sealing Surface: RF, FF, TG, RJ etc. Size: NPS 1/2 - NPS 24(DN 10 - 2000) Pressure: 150#-2500# Surface: Polished Technique: Forged and CNC Machined Inspection: UT% PT% Certificate: ISO9001, TUV etc. WN Titanium Flanges The titanium flange is a part made of pure titanium or titanium alloy, which connects the pipe to the pipe, and to the end of the pipe. Product Name: WN Titanium Flanges Standard: ANSI / ASME B16.5 Material: Gr1 Gr2 Gr5 Gr7 Gr12 Unit Price: $25usd/pc-$85usd/pc Sealing Surface: RF, FF, TG, RJ etc. Size: NPS 1/2 - NPS 24(DN 10 - 2000) Pressure: 150#-2500# Surface: Polished Technique: Forged and CNC Machined Inspection: UT% PT% Certificate: ISO9001, TUV etc. Differences between Weld neck titanium flange and slip on titanium flange 1. Different welding forms: The welding form of neck flat welded titanium flange pipe and titanium flange is fillet welding, while the welding form of the neck butt welded flange and pipe is girth welding; 2. Different materials: the material of the necked flat welding flange is made of ordinary titanium plate with a thickness that meets the requirements, while the material of the necked butt welding flange is mostly machined from titanium forgings; 3. the nominal pressure is different: the nominal pressure of the necked flat welding flange is: 0.6---4.0MPa, and the nominal pressure of the necked butt welding flange is: 1--25MPa; 4. Another point is that the welding seam between the necked butt-welded flange and the connection pipe belongs to type B seam, and the welding seam between the necked flat-welded flange and the connection pipe belongs to type C seam. And the non-destructive testing after welding is different; 5. The necked flat welding flange and the necked butt welding flange cannot be replaced at will. From a manufacturing perspective, the necked flat welding flange (SO is the abbreviation of Slip On) has a large inner diameter, which means that the weight is light and the cost is low. Neck butt welding flanges (WN is the abbreviation of Welding Neck) with a nominal diameter greater than 250mm need to be tested, and SO flanges do not need to be tested, so the cost is low.

Standard: ASME VIII-I, DIN28013 Material: GR1, GR2, GR5, GR7, GR12 Size: Customized Titanium Hemispherical heads Titanium Spherical Heads ,aso called Titanium dish head,Titanium Elliptical Heads.It is a kind of boiler part in pressure vessel. It is usually used at both ends of pressure vessels. Then there is a welding pipe fitting product used for plugging at the end of the pipe. There are many forms. The head is a part of the container and is welded to the barrel. According to the different geometric shapes, it can be divided into spherical, elliptical, disc, spherical crown, cone shell and cover, among which spherical, elliptical, disc and spherical crown head are collectively referred to as convex head. In the welding is divided into butt welding head, socket welding head. Used in various vessels and equipment, such as storage tanks, heat exchangers, towers, reactors, boilers and separation equipment, etc. Products Processing Standard Grade Size Titanium Elliptical & Spherical Heads According to ASME VIII-I Standard or DIN28013 GR1, GR2, GR7, GR12, etc. Process: Cold forming and hot forming Inspection: 100% Ultrasonic Test and PT test after forming. (As per requirement.) Applications Mainly for pressure vessels and boilers in diverse industry such as oil, chemical, winery, pharmaceutical, environmental and military. (Titanium dish head )DIN28013: D (mm) s min/max (mm) Volumen (L) h1 (mm) kg pr mm s D (mm) s min/max (mm) Volumen (L) h1 (mm) kg pr mm s 300 4-10 3.5 78 1,0 1550 5-15 483 403 22.5 350 4-10 5.6 91 1.3 1600 5-15 532 416 23.9 400 4-10 8.3 104 1,7 1650 5-15 585 429 25,4 450 4-10 11.8 117 2,1 1700 5-15 640 442 27.0 500 4-10 16.1 130 2.6 1750 5-15 700 455 28.5 550 3-12 21,6 143 3,1 1800 5-15 760 468 30 600 3-12 28,0 156 3.6 1850 5-15 825 481 31.5 650 3-12 36.0 169 4,2 1900 5-15 890 494 33 700 3-12 44,5 182 4,8 1950 5-15 965 507 36 750 3-12 54.5 195 5,5 2000 6-15 1040 520 37 800 3-13 66.5 203 6.2 2050 6-15 1120 533 38.5 850 3-13 79,5 221 7,0 2100 6-15 1200 546 40.5 900 3-13 94 234 乙8 2150 6-15 1290 559 42,5 950 3-13 111 247 8.6 2200 6-15 1380 572 44.5 1000 4-16 130 260 9.5 2250 6-15 1480 685 46.5 1050 4-13 150 273 10,4 2300 6-15 1580 598 46 5 1100 4-13 173 286 11,1 2350 6-15 1690 611 51 1150 4-13 198 299 12.5 2400 6-15 1800 624 53 1200 4-13 225 312 13.6 2450 6-15 1910 637 55 1250 4-13 254 325 14,7 2500 6-15 2030 660 57

Ladhani Metal Corporation offers SS 310S Half Round Tube Shields specifically designed to protect reheater (R/H) tubes in boilers, power plants, and industrial steam systems. Reheater tubes carry steam through the reheater section of the boiler, where the steam is reheated after partial expansion in the high-pressure turbine to improve efficiency and prevent moisture formation. Manufactured from low-carbon austenitic stainless steel grade SS 310S, these shields provide exceptional resistance to oxidation, scaling, and carburization at elevated temperatures while minimizing the risk of sensitization during welding. Function of R/H Tubes • Carry steam through the reheater section of the boiler • Exposed to very high temperatures (often > 540°C) and erosion from flue gases • Often protected with Half Round Tube Shields in high-velocity and abrasive gas flow zones Ladhani Metal Corporation manufactures, supplies, and exports SS 310S Half Round Tube Shields in multiple lengths, diameters, and thicknesses, serving both domestic and international markets. SS 310S Grade Chemical Composition – Austenitic Stainless Steel • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.50% • Chromium (Cr): 24.00 – 26.00% • Nickel (Ni): 19.00 – 22.00% • Iron (Fe): Balance Applications: Suitable for reheater sections in thermal power plants, waste heat recovery boilers (WHRBs), and heat recovery steam generators (HRSGs) exposed to severe oxidation, scaling, and high-velocity erosive flue gas conditions. Uses • Protects reheater tubes from erosion, oxidation, and soot blower damage • Shields R/H tubes in high-temperature, high-velocity flue gas zones • Extends operational life of steam circuit components under extreme conditions • Applicable in utility boilers, WHRBs, HRSGs, and petrochemical heaters Features • Excellent high-temperature oxidation resistance – Performs continuously up to 1100°C • Superior scaling resistance – Maintains integrity under cyclic heating and cooling • Low-carbon content – Minimizes sensitization and carbide precipitation during welding • Precision-engineered fit – Matches exact tube curvature for optimal coverage Applications • Power generation boilers – Long-term reheater tube protection under severe service • Waste heat recovery systems – Guards against high-velocity particle erosion • Industrial steam plants – Reliable in fluctuating thermal cycles • Petrochemical furnaces – Effective in aggressive reheating environments Conclusion The SS 310S Half Round Tube Shield for Reheater (R/H) Tubes by Ladhani Metal Corporation offers long-lasting, high-temperature, and oxidation-resistant protection for tubes in extreme operating conditions. Designed for a precise fit and superior durability, these shields reduce wear, extend equipment life, and are available in a wide range of export-ready specifications. For technical details and supply inquiries, contact Ladhani Metal Corporation. #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Salem #Erode #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Hassan #Cuttack #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Gaya #Muzaffarpur#halftubeshield #utypehalftubeshield #tubeshieldexporter #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier #SSShielding #IndustrialTubeShield #BoilerTubeGuard #CustomMetalParts #SteelIndustryIndia #MetalEngineering #HeavyIndustrySupply #StainlessSteelIndia #SteelExporters #MetalComponentExport #FabricatedProducts #SteelDealer #IndustrialSupplyIndia #BoilerTubeFittings #TubeShieldingSolutions #HalfTubeCover #HeatExchangerShield #HalfRoundReheaterShield #ReheaterTubeShield #BoilerReheaterProtection #PowerPlantTubeShield #BoilerErosionShield #SteamBoilerTubeShield #HighTempTubeShield

Ladhani Metal Corporation offers Cr25Ni20 Boiler Half Round Tube Shields designed for exceptional durability and performance in extreme high-temperature boiler and heat exchanger environments. Manufactured from heat-resistant austenitic stainless steel containing high chromium and nickel content, Cr25Ni20 provides outstanding resistance to oxidation, carburization, and scaling at elevated service temperatures. The shields are precisely formed into a half-round profile to ensure accurate fitment over straight sections of boiler tubes. They act as a robust barrier against abrasive flue gases, particulate erosion, and soot blower impact, thereby extending tube life and reducing the frequency of maintenance shutdowns. Ladhani Metal Corporation manufactures, supplies, and exports Cr25Ni20 Boiler Half Round Tube Shields in various sizes, thicknesses, and lengths to meet both domestic and international market demands. Cr25Ni20 Grade Chemical Composition – Heat Resistant Austenitic Stainless Steel • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.50% • Chromium (Cr): 24.00 – 26.00% • Nickel (Ni): 19.00 – 22.00% • Iron (Fe): Balance Applications: Ideal for high-temperature industrial boilers, waste heat recovery units, and process heaters operating in oxidizing and carburizing conditions. Uses • Shields straight boiler tubes in superheaters and reheaters • Protects against oxidation, scaling, and hot gas erosion • Suitable for applications involving carburizing atmospheres • Reduces wear from high-velocity particulate-laden flue gases Features • Extreme heat resistance – Performs reliably above 1100°C in continuous service • High chromium-nickel content – Ensures superior oxidation and scaling resistance • Excellent creep strength – Maintains structural integrity under prolonged heat exposure • Accurate fitment – Precision-formed half-round profile for effective tube coverage • Versatile installation – Compatible with welding, clamping, or banding methods • Export quality – Manufactured to meet global industrial standards Applications • Thermal power plants – Protects superheater and reheater tubes in extreme heat zones • Waste heat boilers – Guards tubes in high-temperature gas recovery systems • Petrochemical heaters – Withstands carburizing and oxidizing furnace conditions • Cement and metallurgy industries – Provides long-term tube protection in harsh environments Conclusion The Cr25Ni20 Boiler Half Round Tube Shield from Ladhani Metal Corporation delivers unmatched performance in high-temperature, oxidizing, and carburizing environments. Its high chromium and nickel content ensures long-lasting resistance to scaling and oxidation, while precision manufacturing guarantees a secure fit and effective tube protection. For technical details or export orders, contact Ladhani Metal Corporation. #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Salem #Erode #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Hassan #Cuttack #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Gaya #Muzaffarpur#halftubeshield #utypehalftubeshield #tubeshieldexporter #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier #SSShielding #IndustrialTubeShield #BoilerTubeGuard #CustomMetalParts #SteelIndustryIndia #MetalEngineering #HeavyIndustrySupply #StainlessSteelIndia #SteelExporters #MetalComponentExport #FabricatedProducts #SteelDealer #IndustrialSupplyIndia #BoilerTubeFittings #TubeShieldingSolutions #HalfTubeCover #HeatExchangerShield

Ladhani Metal Corporation offers SS 304L Boiler Half Round Tube Shields designed to protect straight boiler tubes from high-temperature erosion, oxidation, and mechanical impact. Manufactured from low-carbon austenitic stainless steel grade SS 304L, these shields provide superior corrosion resistance and improved weldability, making them ideal for applications where tubes are exposed to aggressive gases, thermal cycling, and post-weld environments. SS 304L minimizes the risk of intergranular corrosion and maintains mechanical strength in elevated temperatures. The shield features a precision-formed half-round profile that matches standard tube diameters for secure fitting and optimal protection. It serves as a physical barrier against soot blower blasts, high-velocity gas streams, and abrasive particulate matter, effectively extending the operational life of boiler tubes. Ladhani Metal Corporation manufactures, supplies, and exports SS 304L Boiler Half Round Tube Shields in a wide range of lengths, diameters, and thicknesses tailored to meet domestic and international boiler protection requirements. SS 304L Grade Chemical Composition – Austenitic Stainless Steel • Carbon (C): ≤ 0.03% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 18.0 – 20.0% • Nickel (Ni): 8.0 – 12.0% • Iron (Fe): Balance Applications: Designed for use in boilers, HRSGs, WHRBs, and industrial heat systems operating in corrosive and high-temperature environments. Uses • Protection of straight tubes in power and process boilers • Installed in radiant and convection zones exposed to flue gas • Shields against erosion from soot blowers and fly ash • Suitable for post-weld environments requiring low carbon stainless steel • Used in chemical, food, and pharmaceutical industries Features • Excellent corrosion resistance – Performs well in oxidizing and corrosive atmospheres • Low carbon content – Prevents carbide precipitation during welding • High thermal stability – Resists deformation under continuous heating • Custom-fit profile – Precisely formed for close contact and effective shielding • Easy installation – Clamping, welding, or banding as required • Export-ready – Manufactured to meet global quality and dimensional standards Applications • Power generation boilers – Protection for superheater and economizer tubes • Chemical and fertilizer plants – Corrosion-resistant shielding in heat zones • Food and dairy processing – Suitable for hygienic and thermally stable conditions • Waste heat recovery systems – Effective in high-temperature gas paths Conclusion The SS 304L Boiler Half Round Tube Shield from Ladhani Metal Corporation offers dependable protection for boiler tubes operating in corrosive, high-temperature environments. With enhanced corrosion resistance, superior weldability, and custom manufacturing options, these shields provide a long-lasting solution for industrial and utility boiler systems. For orders, sizing, or technical assistance, contact Ladhani Metal Corporation. #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Salem #Erode #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Hassan #Cuttack #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Gaya #Muzaffarpur #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier #SSShielding #IndustrialTubeShield #BoilerTubeGuard #CustomMetalParts #SteelIndustryIndia #MetalEngineering #HeavyIndustrySupply #StainlessSteelIndia #SteelExporters #MetalComponentExport #FabricatedProducts #SteelDealer #IndustrialSupplyIndia #BoilerTubeFittings #TubeShieldingSolutions #HalfTubeCover #HeatExchangerShield #halftubeshield #utypehalftubeshield #tubeshieldexporter