'designs tailored'

Half Round Tube Shield Ladhani Metal Corporation manufactures high-quality Half Round Tube Shields designed to protect boiler tubes from erosion, corrosion, and mechanical wear in heat transfer systems. These shields are precisely engineered to fit the curvature of boiler tubes, especially in areas exposed to flue gas turbulence and ash impact. The half-round design allows for easy installation and ensures consistent protection throughout the tube's operating life. Cr23Ni13 Half Round Tube Shield for LTSH Tube The Cr23Ni13 Half Round Tube Shield is fabricated using a high-temperature-resistant chromium-nickel alloy containing approximately 23% chromium and 13% nickel. This composition provides excellent resistance to oxidation, thermal shock, and high-temperature corrosion. It is particularly suited for shielding LTSH (Low Temperature Superheater) tubes that operate in areas where flue gases carry abrasive particles, resulting in gradual material degradation over time. The Low Temperature Superheater (LTSH) is a section in a boiler where saturated steam from the steam drum is superheated to a moderately higher temperature before entering the high-temperature superheater stages. Positioned in areas with relatively lower flue gas temperatures, the LTSH helps improve thermal efficiency and reduces moisture content in steam. Due to constant exposure to abrasive flue gases and ash, LTSH tubes are prone to wear and require protective shielding, such as half round tube shields, to extend service life. Ladhani Metal Corporation is a reliable manufacturer, supplier, and exporter of Cr23Ni13 Half Round Tube Shields, delivering robust and thermally stable components for boiler protection applications in demanding industrial conditions. Chemical Composition of Cr23Ni13 – High Chromium-Nickel Heat-Resistant Steel • Carbon (C): ≤ 0.10% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 22.0 – 24.0% • Nickel (Ni): 12.0 – 14.0% • Iron (Fe): Balance Applications: Ideal for high-temperature zones in boilers and furnaces where oxidation, scaling, and ash corrosion pose operational challenges. Uses • Protects LTSH tubes in coal-fired and biomass-fired boilers • Shields heat exchanger tubes in waste heat recovery units • Provides erosion and oxidation resistance in process heaters and reformers • Installed in utility and industrial boilers to prevent wear from low-temperature flue gases • Suitable for use in marine, chemical, and refining industries where steam purity and thermal efficiency are critical Features • High-temperature resistance – Excellent durability under thermal cycling conditions • Corrosion protection – Chromium-rich alloy protects against oxidizing flue gases • Precision fabrication – Custom-fit designs ensure secure coverage of exposed tube surfaces • Enhanced tube longevity – Reduces surface wear, scaling, and thermal fatigue • Multiple installation methods – Supports weld-on, clamp-on, or banding attachment options • Customizable dimensions – Lengths, thicknesses, and radii can be tailored for system compatibility Applications • thermal power stations – Extends the life of LTSH coil sections in superheaters and economizers • WHRBs – Provides protective coverage for tubes exposed to particulate-laden exhaust gases • process industries – Ideal for exchangers and preheaters in refineries and petrochemical plants • HRSGs – Shields low-temperature superheater zones in combined-cycle power systems • cement and paper plants – Protects heat transfer surfaces from soot and particulate erosion Conclusion The Cr23Ni13 Half Round Tube Shield for LTSH Tube by Ladhani Metal Corporation – manufacturer, supplier, and exporter – offers a reliable and thermally robust solution for protecting superheater and heat exchanger tubes in abrasive and corrosive environments. Its high chromium-nickel composition ensures long-lasting performance in boiler systems where operational efficiency and tube integrity are critical. For orders, technical specifications, or consultation, contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are protective components engineered to shield boiler tubes, superheaters, and heat exchangers from erosion, scaling, and ash impact. These shields are widely used in thermal power plants, industrial steam systems, and waste heat recovery units to prolong tube life and enhance operational reliability. Their semi-cylindrical shape allows for easy installation over exposed tube surfaces, especially in zones exposed to abrasive flue gases and thermal stress. SS 310S Half Round Tube Shield for LTSH Tube The SS 310S Half Round Tube Shield is manufactured from low-carbon austenitic stainless steel grade 310S. With high chromium and nickel content, it offers excellent resistance to oxidation and scaling at elevated temperatures, while its reduced carbon level enhances weldability and reduces the risk of sensitization. This makes it ideal for Low Temperature Superheater (LTSH) applications, where tubes are exposed to flue gas streams, ash particles, and moderate thermal cycling. The Low Temperature Superheater (LTSH) is a section in a boiler where saturated steam from the steam drum is superheated to a moderately higher temperature before entering the high-temperature superheater stages. Positioned in areas with relatively lower flue gas temperatures, the LTSH helps improve thermal efficiency and reduces moisture content in steam. Due to constant exposure to abrasive flue gases and ash, LTSH tubes are prone to wear and require protective shielding, such as half round tube shields, to extend service life. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of SS 310S Half Round Tube Shields for LTSH tubes, offering high-performance shielding solutions for long-term service in boiler and heat recovery systems. Chemical Composition of SS 310S – Low Carbon Austenitic Stainless Steel • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.50% • Chromium (Cr): 24.0 – 26.0% • Nickel (Ni): 19.0 – 22.0% • Iron (Fe): Balance Applications: Suitable for areas with exposure to moderate temperatures, oxidizing gases, and ash deposition where high-temperature strength and corrosion resistance are critical. Uses • Protects LTSH tubes in power boilers from ash erosion, soot impact, and flue gas corrosion • Used in convection zones of HRSGs, economizers, and waste heat recovery units • Shields tube surfaces in steam generation systems exposed to gas turbulence and thermal cycling • Effective in industrial heating systems and chemical boilers facing scale formation and heat stress • Enhances durability of tubes in coal-fired and biomass-fired boilers with fly ash carryover Features • Excellent oxidation and scaling resistance – Performs in oxidizing environments and thermal zones • Superior weldability – Low carbon content minimizes risk of intergranular corrosion during welding • Tailored protection – Custom-fabricated to match tube diameter, bend radius, and system layout • Simple installation – Compatible with clamping, banding, or welding methods for quick setup • Extended tube life – Minimizes erosion and surface degradation, reducing maintenance downtime • Available in various lengths and thicknesses per system requirements Applications • thermal power plants – Installed on LTSH tube banks for long-term protection against erosion and corrosion • waste heat recovery boilers – Shields curved tubes in return flow zones with ash-laden flue gas • petrochemical units – Applied on steam coils and heat exchanger tubes operating under oxidizing gas exposure • utility boilers – Protects superheater tubes from scaling and particulate impact in low-temperature sections • industrial boiler systems – Enhances performance and service life of steam tubes in energy recovery zones Conclusion The SS 310S Half Round Tube Shield for LTSH Tube by Ladhani Metal Corporation – manufacturer, supplier, and exporter – offers reliable protection for superheater tubes operating in low-temperature, oxidizing, and abrasive flue gas environments. With enhanced weldability, high-temperature resistance, and custom-fit fabrication, this shield ensures dependable performance across a wide range of thermal and industrial applications. For technical assistance, tailored designs, or quotation requests, please contact Ladhani Metal Corporation.

Molybdenum plates are flat, solid sheets of molybdenum metal, renowned for their outstanding properties such as high temperature resistance, strength, and corrosion resistance. These plates are primarily used in demanding industrial applications where materials need to perform under extreme conditions. Key Features of Molybdenum Plates: o High Melting Point: Molybdenum has a very high melting point of about 2,623°C (4,753°F), which makes it ideal for use in high-temperature environments such as aerospace, metal processing, and furnace construction. o Strength and Durability: Molybdenum plates maintain excellent mechanical strength and can withstand heavy stress and pressure without deformation. This makes them suitable for structural components in industries like aerospace and manufacturing. o Corrosion and Oxidation Resistance: Molybdenum is highly resistant to corrosion, especially in high-temperature conditions, which makes molybdenum plates ideal for use in chemically aggressive environments such as chemical processing plants. o Thermal and Electrical Conductivity: Molybdenum has good thermal and electrical conductivity, making it an ideal material for specialized applications in electronics and electrical components, such as filaments, electrodes, and connectors. o Workability: Despite being a hard and brittle metal at room temperature, molybdenum can be processed into thin plates with precise dimensions and surface finishes, making it versatile for various applications. o Ductility at Elevated Temperatures: Molybdenum's ductility increases at higher temperatures, allowing it to be shaped and fabricated into complex parts for industrial use. Common Applications: o Aerospace and Aviation: Molybdenum plates are used in the production of heat shields, turbine blades, and components for jet engines due to their ability to withstand high temperatures and stress. o Chemical and Petrochemical Industries: Molybdenum plates are employed in the construction of reactors, furnace linings, and other equipment that needs to resist harsh chemical environments at high temperatures. o Electronics and Electrical Engineering: Molybdenum plates are used in applications like electrical contacts, semiconductors, and components for vacuum tubes and other high-performance electronic devices. o Metallurgical Industry: Molybdenum plates are often used in the manufacturing of steel alloys and other metals to enhance strength, durability, and resistance to high temperatures.

Ladhani Metal Corporation, a manufacturer, supplier, and exporter, offers stainless steel sheets, plates, and coils in grade X20Cr25Ni20 as per IS 6911 specifications. X20Cr25Ni20 is a high chromium-nickel austenitic stainless steel grade developed for superior performance at elevated temperatures. It offers outstanding resistance to oxidation, scaling, and carburization, along with good mechanical strength in aggressive industrial environments. Chemical Composition of X20Cr25Ni20 (as per IS 6911) • Carbon (C): 0.20% max • Manganese (Mn): 2.0% max • Silicon (Si): 1.0% max • Phosphorus (P): 0.045% max • Sulphur (S): 0.030% max • Chromium (Cr): 24.0% – 26.0% • Nickel (Ni): 19.0% – 22.0% Functions and Characteristics • Excellent resistance to oxidation and scaling at high temperatures • High strength retention under prolonged elevated temperature service • Superior resistance to carburization and sulfidation in aggressive atmospheres • Good corrosion resistance in oxidizing and reducing conditions • Stable austenitic microstructure ensures toughness under thermal cycling • Good formability and weldability for industrial fabrication Applications • Power Generation – Superheater tubes, reheater tubes, and boiler components • Oil and Gas – Furnace parts, flue gas handling equipment, and reformer tubes • Petrochemical Industry – Cracking units, reactors, and heat treatment fixtures • Fertilizer Plants – High-temperature vessels and chemical-handling pipelines • Chemical Industry – Heat exchangers, process reactors, and thermal equipment • Marine Engineering – Exhaust components and offshore thermal-resistant systems • Automotive Industry – Turbocharger components and exhaust manifolds • Food Processing – Thermal-resistant processing equipment and ovens • Construction – Chimney liners, refractory anchors, and high-heat structural supports • General Engineering – Valves, fasteners, and parts exposed to extreme heat Available Forms • Stainless steel sheets • Stainless steel plates • Stainless steel coils Grades Available under IS 6911 Apart from X20Cr25Ni20, IS 6911 also covers a wide range of stainless steel grades, including X04Cr12, X07Cr17, X12Cr12, X20Cr13, X30Cr13, X40Cr13, X15Cr16Ni2, X108Cr17Mo, X10Cr17Mn6Ni4N2O, X07Cr11Mn12Ni4, X10Cr18Mn9Ni5, X30Cr17Ni7, X07Cr18Ni9, X04Cr19Ni9, X02Cr19Ni10, X15Cr24Ni13, X04Cr17Ni12Mo2, X02Cr17Ni12Mo2, X04Cr17Ni12Mo2Ti, X04Cr18Ni10Ti, X04Cr18Ni10Nb and other specified grades. Conclusion IS 6911 SS X20Cr25Ni20 sheets, plates, and coils offered by Ladhani Metal Corporation, a manufacturer, supplier, and exporter, are best suited for high-temperature industrial applications requiring superior oxidation and scaling resistance. With availability in multiple IS 6911 grades, we provide reliable stainless steel solutions tailored to diverse industries. For inquiries or project requirements, contact Ladhani Metal Corporation. #Mumbai #Delhi #Chennai #Kolkata #Hyderabad #Bangalore #Pune #Ahmedabad #Surat #Rajkot #Vadodara #Coimbatore #Jaipur #Nagpur #Indore #Ludhiana #Kanpur #Bhubaneswar #Rourkela #Visakhapatnam #Trichy #Kochi #Mangalore #Jamnagar #Bharuch #Vapi #Hazira #Ankleshwar #Durgapur #Jamshedpur #Raipur #Bilaspur #Faridabad #Noida #Gurgaon #Chandigarh #Lucknow #Bhopal #Patna #Guwahati #Agra #Varanasi #Meerut #Ghaziabad #Moradabad #Aligarh #Aurangabad #Kolhapur #Nashik #Solapur #Thane #Amravati #Satara #Sangli #Hubli #Belgaum #Davangere #Mysore #Erode #Salem #Madurai #Tirunelveli #Tuticorin #Hosur #Nellore #Warangal #Karimnagar #Nanded #Udaipur #Ajmer #Jodhpur #Kota #Alwar #Gwalior #Rewa #Jhansi #IS6911sheetmanufacturer #IS6911sheet supplier # IS6911sheetexporter #IS6911 #IS6911StainlessSteel #IS6911Sheet #IS6911Plate #IS6911Coil #IS6911Strip #IS6911Manufacturer #IS6911Supplier #IS6911Exporter #StainlessSteelIndia #StainlessSteelSheet #StainlessSteelPlate #StainlessSteelCoil #StainlessSteelStrip #SS304 #SS304L #SS316 #SS316L #X04Cr12 #X07Cr17 #X12Cr12 #X20Cr13 #X30Cr13 #X40Cr13 #X15Cr16Ni2 #X108Cr17Mo #X07Cr18Ni9 #X04Cr19Ni9 #X02Cr19Ni10 #X15Cr24Ni13 #X20Cr25Ni20 #X04Cr17Ni12Mo2 #X02Cr17Ni12Mo2 #X04Cr17Ni12Mo2Ti #X04Cr18Ni10Ti #X04Cr18Ni10Nb #StainlessSteelGrades #StainlessSteelManufacturer #StainlessSteelSupplier #StainlessSteelExporter #StainlessSteelStockist #IndustrialStainlessSteel #BoilerStainlessSteel #PetrochemicalStainlessSteel #ChemicalIndustryStainlessSteel #MarineStainlessSteel #HeatResistantSteel #CorrosionResistantSteel #SSSheetsPlatesCoils #LadhaniMetalCorporation

Ladhani Metal Corporation offers SS Insulated Pipe Shoe Clamps designed to support and secure pipelines while maintaining thermal insulation integrity. These clamps are specially engineered with insulation material between the pipe and the shoe, ensuring minimal heat transfer and preventing energy loss in high-temperature or cryogenic applications. Manufactured from high-quality stainless steel, our insulated pipe shoe clamps combine durability, corrosion resistance, and reliable performance in demanding process environments. Function of SS Insulated Pipe Shoe Clamps • Provide stable pipe support while maintaining insulation continuity • Prevent thermal bridges and reduce energy loss in piping systems • Isolate pipes from supporting structures to minimize heat transfer • Distribute loads evenly, reducing stress on pipelines and insulation • Enhance operational efficiency and protect pipeline coatings Ladhani Metal Corporation manufactures, supplies, and exports SS Insulated Pipe Shoe Clamps in different sizes and designs to meet diverse project requirements across domestic and international markets. Available Grades • SS 304 • SS 304L • SS 316 • SS 316L Applications Commonly used in industries where maintaining insulation and preventing heat loss or gain is critical. • Refineries and petrochemical plants • Cryogenic and LNG facilities • Fertilizer and chemical processing units • Power generation plants and boilers • Marine and offshore engineering projects Uses • Provides insulated support for process pipelines in hot and cold service • Prevents damage to insulation during thermal expansion and movement • Improves efficiency by maintaining process temperature control • Protects against corrosion under insulation (CUI) • Suitable for heavy-duty and high-temperature pipeline systems Features • Integrated insulation design to reduce heat transfer • High load-bearing capacity and durable construction • Resistance to corrosion and oxidation in aggressive environments • Long service life with minimal maintenance requirements • Manufactured in SS 304, 304L, 316, and 316L grades Conclusion The SS Insulated Pipe Shoe Clamp from Ladhani Metal Corporation is a reliable solution for maintaining insulation performance and structural integrity in pipeline systems. Manufactured in SS 304, SS 304L, SS 316, and SS 316L grades, these clamps provide dependable service in industries requiring thermal efficiency, durability, and corrosion resistance. For inquiries or project requirements, contact Ladhani Metal Corporation #Mumbai #Delhi #Bangalore #Hyderabad #Chennai #Kolkata #Pune #Ahmedabad #Surat #Vadodara #Rajkot #Nagpur #Indore #Bhopal #Jaipur #Lucknow #Kanpur #Patna #Ranchi #Jamshedpur #Bhubaneswar #Raipur #Visakhapatnam #Vijayawada #Coimbatore #Madurai #Kochi #Trivandrum #Tiruchirappalli #Mangalore #Mysore #Noida #Gurgaon #Faridabad #Ghaziabad #Ludhiana #Amritsar #Chandigarh #Jalandhar #Agra #Varanasi #Meerut #Aurangabad #Nashik #Solapur #Gwalior #Allahabad #Guwahati #Shillong #PipeShoeClamp #StainlessSteelPipeShoeClamp #SSPipeShoeClamp #PipeShoeClampManufacturer #PipeShoeClampSupplier #PipeShoeClampExporter #PipeShoeClampIndia #IndustrialPipeShoeClamp #HeavyDutyPipeShoeClamp #CustomPipeShoeClamp #HighQualityPipeShoeClamp #304PipeShoeClamp #316PipeShoeClamp #304LPipeShoeClamp #316LPipeShoeClamp #PipeShoeClampFittings #PipeShoeClampSupport #SS304PipeShoeClamp #SS316PipeShoeClamp #SS316LPipeShoeClamp #SS304LPipeShoeClamp #PipeShoeClampDesign #PipeShoeClampApplication #PipeShoeClampForBoilers #PipeShoeClampForRefinery #PipeShoeClampForPetrochemical #PipeShoeClampForPowerPlant #PipeShoeClampForOilAndGas #PipeShoeClampForChemicalPlant #PipeShoeClampSolutions #PipeShoeClampProducts #PipeShoeClampFabrication #PipeShoeClampInstallation #PipeShoeClampSupportSystem #PipeShoeClampAssembly #PipeShoeClampHardware #PipeShoeClampTechnology #DurablePipeShoeClamp #ReliablePipeShoeClamp #PipeShoeClampStockist #PipeShoeClampWholesale #PipeShoeClampTrading #PipeShoeClampDistribution #PipeShoeClampExports #PipeShoeClampWorldwide #PipeShoeClampIndustry #PipeShoeClampMarket #PipeShoeClampOnline #PipeShoeClampComponents #PipeShoeClampSystems

Ladhani Metal Corporation offers SS Insulated Pipe Shoe Clamps designed to support and secure pipelines while maintaining thermal insulation integrity. These clamps are specially engineered with insulation material between the pipe and the shoe, ensuring minimal heat transfer and preventing energy loss in high-temperature or cryogenic applications. Manufactured from high-quality stainless steel, our insulated pipe shoe clamps combine durability, corrosion resistance, and reliable performance in demanding process environments. Function of SS Insulated Pipe Shoe Clamps • Provide stable pipe support while maintaining insulation continuity • Prevent thermal bridges and reduce energy loss in piping systems • Isolate pipes from supporting structures to minimize heat transfer • Distribute loads evenly, reducing stress on pipelines and insulation • Enhance operational efficiency and protect pipeline coatings Ladhani Metal Corporation manufactures, supplies, and exports SS Insulated Pipe Shoe Clamps in different sizes and designs to meet diverse project requirements across domestic and international markets. Available Grades • SS 304 • SS 304L • SS 316 • SS 316L Applications Commonly used in industries where maintaining insulation and preventing heat loss or gain is critical. • Refineries and petrochemical plants • Cryogenic and LNG facilities • Fertilizer and chemical processing units • Power generation plants and boilers • Marine and offshore engineering projects Uses • Provides insulated support for process pipelines in hot and cold service • Prevents damage to insulation during thermal expansion and movement • Improves efficiency by maintaining process temperature control • Protects against corrosion under insulation (CUI) • Suitable for heavy-duty and high-temperature pipeline systems Features • Integrated insulation design to reduce heat transfer • High load-bearing capacity and durable construction • Resistance to corrosion and oxidation in aggressive environments • Long service life with minimal maintenance requirements • Manufactured in SS 304, 304L, 316, and 316L grades Conclusion The SS Insulated Pipe Shoe Clamp from Ladhani Metal Corporation is a reliable solution for maintaining insulation performance and structural integrity in pipeline systems. Manufactured in SS 304, SS 304L, SS 316, and SS 316L grades, these clamps provide dependable service in industries requiring thermal efficiency, durability, and corrosion resistance. For inquiries or project requirements, contact Ladhani Metal Corporation #Mumbai #Delhi #Bangalore #Hyderabad #Chennai #Kolkata #Pune #Ahmedabad #Surat #Vadodara #Rajkot #Nagpur #Indore #Bhopal #Jaipur #Lucknow #Kanpur #Patna #Ranchi #Jamshedpur #Bhubaneswar #Raipur #Visakhapatnam #Vijayawada #Coimbatore #Madurai #Kochi #Trivandrum #Tiruchirappalli #Mangalore #Mysore #Noida #Gurgaon #Faridabad #Ghaziabad #Ludhiana #Amritsar #Chandigarh #Jalandhar #Agra #Varanasi #Meerut #Aurangabad #Nashik #Solapur #Gwalior #Allahabad #Guwahati #Shillong #PipeShoeClamp #StainlessSteelPipeShoeClamp #SSPipeShoeClamp #PipeShoeClampManufacturer #PipeShoeClampSupplier #PipeShoeClampExporter #PipeShoeClampIndia #IndustrialPipeShoeClamp #HeavyDutyPipeShoeClamp #CustomPipeShoeClamp #HighQualityPipeShoeClamp #304PipeShoeClamp #316PipeShoeClamp #304LPipeShoeClamp #316LPipeShoeClamp #PipeShoeClampFittings #PipeShoeClampSupport #SS304PipeShoeClamp #SS316PipeShoeClamp #SS316LPipeShoeClamp #SS304LPipeShoeClamp #PipeShoeClampDesign #PipeShoeClampApplication #PipeShoeClampForBoilers #PipeShoeClampForRefinery #PipeShoeClampForPetrochemical #PipeShoeClampForPowerPlant #PipeShoeClampForOilAndGas #PipeShoeClampForChemicalPlant #PipeShoeClampSolutions #PipeShoeClampProducts #PipeShoeClampFabrication #PipeShoeClampInstallation #PipeShoeClampSupportSystem #PipeShoeClampAssembly #PipeShoeClampHardware #PipeShoeClampTechnology #DurablePipeShoeClamp #ReliablePipeShoeClamp #PipeShoeClampStockist #PipeShoeClampWholesale #PipeShoeClampTrading #PipeShoeClampDistribution #PipeShoeClampExports #PipeShoeClampWorldwide #PipeShoeClampIndustry #PipeShoeClampMarket #PipeShoeClampOnline #PipeShoeClampComponents #PipeShoeClampSystems

Ladhani Metal Corporation offers SS Insulated Pipe Shoe Clamps designed to support and secure pipelines while maintaining thermal insulation integrity. These clamps are specially engineered with insulation material between the pipe and the shoe, ensuring minimal heat transfer and preventing energy loss in high-temperature or cryogenic applications. Manufactured from high-quality stainless steel, our insulated pipe shoe clamps combine durability, corrosion resistance, and reliable performance in demanding process environments. Function of SS Insulated Pipe Shoe Clamps • Provide stable pipe support while maintaining insulation continuity • Prevent thermal bridges and reduce energy loss in piping systems • Isolate pipes from supporting structures to minimize heat transfer • Distribute loads evenly, reducing stress on pipelines and insulation • Enhance operational efficiency and protect pipeline coatings Ladhani Metal Corporation manufactures, supplies, and exports SS Insulated Pipe Shoe Clamps in different sizes and designs to meet diverse project requirements across domestic and international markets. Available Grades • SS 304 • SS 304L • SS 316 • SS 316L Applications Commonly used in industries where maintaining insulation and preventing heat loss or gain is critical. • Refineries and petrochemical plants • Cryogenic and LNG facilities • Fertilizer and chemical processing units • Power generation plants and boilers • Marine and offshore engineering projects Uses • Provides insulated support for process pipelines in hot and cold service • Prevents damage to insulation during thermal expansion and movement • Improves efficiency by maintaining process temperature control • Protects against corrosion under insulation (CUI) • Suitable for heavy-duty and high-temperature pipeline systems Features • Integrated insulation design to reduce heat transfer • High load-bearing capacity and durable construction • Resistance to corrosion and oxidation in aggressive environments • Long service life with minimal maintenance requirements • Manufactured in SS 304, 304L, 316, and 316L grades Conclusion The SS Insulated Pipe Shoe Clamp from Ladhani Metal Corporation is a reliable solution for maintaining insulation performance and structural integrity in pipeline systems. Manufactured in SS 304, SS 304L, SS 316, and SS 316L grades, these clamps provide dependable service in industries requiring thermal efficiency, durability, and corrosion resistance. For inquiries or project requirements, contact Ladhani Metal Corporation #Mumbai #Delhi #Bangalore #Hyderabad #Chennai #Kolkata #Pune #Ahmedabad #Surat #Vadodara #Rajkot #Nagpur #Indore #Bhopal #Jaipur #Lucknow #Kanpur #Patna #Ranchi #Jamshedpur #Bhubaneswar #Raipur #Visakhapatnam #Vijayawada #Coimbatore #Madurai #Kochi #Trivandrum #Tiruchirappalli #Mangalore #Mysore #Noida #Gurgaon #Faridabad #Ghaziabad #Ludhiana #Amritsar #Chandigarh #Jalandhar #Agra #Varanasi #Meerut #Aurangabad #Nashik #Solapur #Gwalior #Allahabad #Guwahati #Shillong #PipeShoeClamp #StainlessSteelPipeShoeClamp #SSPipeShoeClamp #PipeShoeClampManufacturer #PipeShoeClampSupplier #PipeShoeClampExporter #PipeShoeClampIndia #IndustrialPipeShoeClamp #HeavyDutyPipeShoeClamp #CustomPipeShoeClamp #HighQualityPipeShoeClamp #304PipeShoeClamp #316PipeShoeClamp #304LPipeShoeClamp #316LPipeShoeClamp #PipeShoeClampFittings #PipeShoeClampSupport #SS304PipeShoeClamp #SS316PipeShoeClamp #SS316LPipeShoeClamp #SS304LPipeShoeClamp #PipeShoeClampDesign #PipeShoeClampApplication #PipeShoeClampForBoilers #PipeShoeClampForRefinery #PipeShoeClampForPetrochemical #PipeShoeClampForPowerPlant #PipeShoeClampForOilAndGas #PipeShoeClampForChemicalPlant #PipeShoeClampSolutions #PipeShoeClampProducts #PipeShoeClampFabrication #PipeShoeClampInstallation #PipeShoeClampSupportSystem #PipeShoeClampAssembly #PipeShoeClampHardware #PipeShoeClampTechnology #DurablePipeShoeClamp #ReliablePipeShoeClamp #PipeShoeClampStockist #PipeShoeClampWholesale #PipeShoeClampTrading #PipeShoeClampDistribution #PipeShoeClampExports #PipeShoeClampWorldwide #PipeShoeClampIndustry #PipeShoeClampMarket #PipeShoeClampOnline #PipeShoeClampComponents #PipeShoeClampSystems

Ladhani Metal Corporation manufactures SS Arc Tube Shields engineered to provide maximum protection for boiler tubes operating under severe thermal and erosive conditions. These shields are designed with a curved or arc profile to cover specific tube sections that are most vulnerable to flue gas turbulence, abrasive ash particles, and soot blower impact. Widely used in superheaters, reheaters, economizers, and waste heat recovery boilers, SS Arc Tube Shields ensure extended service life, reduced downtime, and improved efficiency of boiler systems. Function of SS Arc Tube Shields • Protect tube surfaces from localized erosion and high-temperature oxidation • Provide angular coverage in zones most affected by flue gas and ash flow • Extend tube life and minimize costly replacements • Enhance operational reliability in high-stress boiler environments Ladhani Metal Corporation manufactures, supplies, and exports SS Arc Tube Shields in various radii, thicknesses, and custom-fit designs for use in power plants, WHRBs, HRSGs, and industrial steam boilers. Available Grades • SS 304 / SS 304L • SS 310 / SS 310S • SS 316 / SS 316L • SS 410 / SS 420 / SS 430 • 1Cr13 • 1Cr18Ni9Ti • 1Cr20Ni14Si2 • 1Cr25Ni20Si2 • Cr23Ni13 • Cr25Ni20 Applications: Suitable for thermal power plants, waste heat recovery boilers, HRSGs, petrochemical heaters, and cement industry boilers operating under erosive and high-temperature environments. Uses • Protects boiler tube bends, elbows, and high-impact areas • Shields against abrasive flue gas streams and soot blower erosion • Extends operational life of superheater, reheater, and economizer tubes • Reduces maintenance frequency and shutdown costs Features • High-temperature oxidation and erosion resistance • Strong mechanical integrity with precision-engineered fit • Manufactured in stainless steel and heat-resistant alloys • Easy to install, remove, and replace during boiler overhauls Applications • Power generation boilers – Protects high-erosion flue gas path tubes • Waste heat recovery boilers – Shields against abrasive gas flows • HRSGs – Ensures durability in cyclic temperature operations • Industrial and process heaters – Reliable in corrosive and scaling conditions Conclusion SS Arc Tube Shields by Ladhani Metal Corporation provide effective, long-lasting protection for boiler tubes exposed to harsh environments. Available in stainless steel grades (SS 304/304L, SS 310/310S, SS 316/316L, SS 410/420/430) and special alloys (1Cr13, 1Cr18Ni9Ti, 1Cr20Ni14Si2, 1Cr25Ni20Si2, Cr23Ni13, Cr25Ni20), these shields are precision-engineered to improve boiler tube performance, reduce wear, and deliver export-quality durability.

Ladhani Metal Corporation manufactures and supplies SS Tube Shields engineered to protect boiler tubes from erosion, oxidation, and soot blower impact in thermal power plants, WHRBs, HRSGs, and industrial boilers. Boiler tubes in superheaters, reheaters, and economizers are continuously exposed to high-velocity flue gases, abrasive ash particles, and elevated temperatures, leading to thinning and premature failure. SS Tube Shields act as a protective barrier, extending service life and improving reliability of steam-generating equipment. Function of SS Tube Shields • Protect boiler tubes against erosion, oxidation, and surface wear • Withstand high-temperature boiler atmospheres above 540°C • Minimize damage from abrasive ash and soot blower jets • Improve operational efficiency by reducing tube failures and downtime Ladhani Metal Corporation manufactures, supplies, and exports SS Tube Shields in different sizes, thicknesses, and profiles, tailored for straight tubes, bends, elbows, and U-bends, serving both domestic and international industries. Available Grades • SS 304 / SS 304L • SS 310 / SS 310S • SS 316 / SS 316L • SS 410 / SS 420 / SS 430 • 1Cr13 • 1Cr18Ni9Ti • 1Cr20Ni14Si2 • 1Cr25Ni20Si2 • Cr23Ni13 • Cr25Ni20 Applications: Widely used in thermal power plants, waste heat recovery boilers (WHRBs), heat recovery steam generators (HRSGs), petrochemical heaters, cement plants, and industrial steam systems. Uses • Shields superheater, reheater, and economizer tubes • Protects elbows, bends, and U-bends from high flue gas erosion • Reduces surface wear and scaling in aggressive atmospheres • Extends tube life, lowering replacement and maintenance costs Features • Excellent resistance to high-temperature oxidation and erosion • High mechanical strength and durability under cyclic thermal loads • Precision-engineered fit for multiple tube geometries • Available in a wide range of stainless steels and heat-resistant alloys Applications • Power generation boilers – Enhanced reliability and tube life • WHRBs and HRSGs – Long-term performance in erosive flue gas zones • Industrial furnaces and process heaters – Durability under high dust load • Petrochemical plants – Consistent tube protection under thermal cycling Conclusion SS Tube Shields by Ladhani Metal Corporation provide high-performance, export-ready solutions for protecting boiler tubes in severe operating environments. Manufactured in stainless steels SS 304/304L, SS 310/310S, SS 316/316L, SS 410/420/430, and special alloys including 1Cr13, 1Cr18Ni9Ti, 1Cr20Ni14Si2, 1Cr25Ni20Si2, Cr23Ni13, and Cr25Ni20, these shields ensure longer service life, reduced downtime, and superior boiler efficiency. #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Muzaffarpur#halftubeshield #utypehalftubeshield #tubeshieldexporter #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier #SSShielding #IndustrialTubeShield #BoilerTubeGuard #CustomMetalParts #SteelIndustryIndia #MetalEngineering #HeavyIndustrySupply #StainlessSteelIndia #SteelExporters #MetalComponentExport #FabricatedProducts #SteelDealer #IndustrialSupplyIndia #BoilerTubeFittings #TubeShieldingSolutions #HalfTubeCover #HeatExchangerShield #HalfRoundReheaterShield #ReheaterTubeShield #BoilerReheaterProtection #PowerPlantTubeShield #BoilerErosionShield #SteamBoilerTubeShield #HighTempTubeShield #BoilerWearProtection