Ladhani Metal Corporation offers SS 310S Half Round Tube Shields specifically designed to protect reheater (R/H) tubes in boilers, power plants, and industrial steam systems. Reheater tubes carry steam through the reheater section of the boiler, where the steam is reheated after partial expansion in the high-pressure turbine to improve efficiency and prevent moisture formation. Manufactured from low-carbon austenitic stainless steel grade SS 310S, these shields provide exceptional resistance to oxidation, scaling, and carburization at elevated temperatures while minimizing the risk of sensitization during welding. Function of R/H Tubes • Carry steam through the reheater section of the boiler • Exposed to very high temperatures (often > 540°C) and erosion from flue gases • Often protected with Half Round Tube Shields in high-velocity and abrasive gas flow zones Ladhani Metal Corporation manufactures, supplies, and exports SS 310S Half Round Tube Shields in multiple lengths, diameters, and thicknesses, serving both domestic and international markets. SS 310S Grade Chemical Composition – Austenitic Stainless Steel • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.50% • Chromium (Cr): 24.00 – 26.00% • Nickel (Ni): 19.00 – 22.00% • Iron (Fe): Balance Applications: Suitable for reheater sections in thermal power plants, waste heat recovery boilers (WHRBs), and heat recovery steam generators (HRSGs) exposed to severe oxidation, scaling, and high-velocity erosive flue gas conditions. Uses • Protects reheater tubes from erosion, oxidation, and soot blower damage • Shields R/H tubes in high-temperature, high-velocity flue gas zones • Extends operational life of steam circuit components under extreme conditions • Applicable in utility boilers, WHRBs, HRSGs, and petrochemical heaters Features • Excellent high-temperature oxidation resistance – Performs continuously up to 1100°C • Superior scaling resistance – Maintains integrity under cyclic heating and cooling • Low-carbon content – Minimizes sensitization and carbide precipitation during welding • Precision-engineered fit – Matches exact tube curvature for optimal coverage Applications • Power generation boilers – Long-term reheater tube protection under severe service • Waste heat recovery systems – Guards against high-velocity particle erosion • Industrial steam plants – Reliable in fluctuating thermal cycles • Petrochemical furnaces – Effective in aggressive reheating environments Conclusion The SS 310S Half Round Tube Shield for Reheater (R/H) Tubes by Ladhani Metal Corporation offers long-lasting, high-temperature, and oxidation-resistant protection for tubes in extreme operating conditions. Designed for a precise fit and superior durability, these shields reduce wear, extend equipment life, and are available in a wide range of export-ready specifications. For technical details and supply inquiries, contact Ladhani Metal Corporation. #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Salem #Erode #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Hassan #Cuttack #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Gaya #Muzaffarpur#halftubeshield #utypehalftubeshield #tubeshieldexporter #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier #SSShielding #IndustrialTubeShield #BoilerTubeGuard #CustomMetalParts #SteelIndustryIndia #MetalEngineering #HeavyIndustrySupply #StainlessSteelIndia #SteelExporters #MetalComponentExport #FabricatedProducts #SteelDealer #IndustrialSupplyIndia #BoilerTubeFittings #TubeShieldingSolutions #HalfTubeCover #HeatExchangerShield #HalfRoundReheaterShield #ReheaterTubeShield #BoilerReheaterProtection #PowerPlantTubeShield #BoilerErosionShield #SteamBoilerTubeShield #HighTempTubeShield

Ladhani Metal Corporation offers SS 310 Half Round Tube Shields specifically designed to protect reheater (R/H) tubes in boilers, power plants, and industrial steam systems. Reheater tubes carry steam through the reheater section of the boiler, where the steam is reheated after partial expansion in the high-pressure turbine to improve efficiency and prevent moisture formation. Manufactured from high-temperature austenitic stainless steel grade SS 310, these shields offer outstanding resistance to oxidation, carburization, and scaling at elevated temperatures, making them suitable for extreme boiler environments. Function of R/H Tubes • Carry steam through the reheater section of the boiler • Exposed to very high temperatures (often > 540°C) and erosion from flue gases • Often protected with Half Round Tube Shields in areas where flue gas velocity and ash particles cause wear Ladhani Metal Corporation manufactures, supplies, and exports SS 310 Half Round Tube Shields in various lengths, diameters, and thicknesses, serving both domestic and international markets. SS 310 Grade Chemical Composition – Austenitic Stainless Steel • Carbon (C): ≤ 0.25% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.50% • Chromium (Cr): 24.00 – 26.00% • Nickel (Ni): 19.00 – 22.00% • Iron (Fe): Balance Applications: Suitable for reheater sections in thermal power plants, waste heat recovery boilers (WHRBs), and heat recovery steam generators (HRSGs) exposed to severe oxidation, scaling, and erosive flue gas conditions. Uses • Protects reheater tubes from erosion, oxidation, and soot blower impact • Shields R/H tubes in high-temperature, high-velocity flue gas zones • Extends operational life of boiler steam circuits in aggressive environments • Applicable in utility boilers, WHRBs, HRSGs, and petrochemical heaters Features • Excellent oxidation resistance – Withstands continuous service up to 1100°C • Superior scaling resistance – Performs well in cyclic temperature conditions • High chromium and nickel content – Enhances corrosion and heat resistance • Precision fit – Matches tube curvature for maximum shielding efficiency Applications • Power generation boilers – Long-term protection for reheater tubes under extreme thermal loads • Waste heat recovery systems – Safeguards tubes in erosive and high-temperature flue gas streams • Industrial steam plants – Maintains performance in fluctuating thermal cycles • Petrochemical furnaces – Suitable for aggressive reheating environments Conclusion The SS 310 Half Round Tube Shield for Reheater (R/H) Tubes by Ladhani Metal Corporation provides exceptional high-temperature and oxidation-resistant protection for critical steam circuit components. Designed for precision fit, durability, and long service life, these shields reduce wear, minimize downtime, and are available in a wide range of export-ready specifications. For technical details and supply inquiries, contact Ladhani Metal Corporation. #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Salem #Erode #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Hassan #Cuttack #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Gaya #Muzaffarpur#halftubeshield #utypehalftubeshield #tubeshieldexporter #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier #SSShielding #IndustrialTubeShield #BoilerTubeGuard #CustomMetalParts #SteelIndustryIndia #MetalEngineering #HeavyIndustrySupply #StainlessSteelIndia #SteelExporters #MetalComponentExport #FabricatedProducts #SteelDealer #IndustrialSupplyIndia #BoilerTubeFittings #TubeShieldingSolutions #HalfTubeCover #HeatExchangerShield #HalfRoundReheaterShield #ReheaterTubeShield #BoilerReheaterProtection #PowerPlantTubeShield

Ladhani Metal Corporation offers 1Cr25Ni20Si2 Outer Half Round 90 Degree Bend Tube Shields specifically designed to protect the outer curvature of U-bends and 90-degree turns in high-temperature tubes used in boilers, superheaters, reheaters, heat exchangers, and industrial furnaces. Made from high-alloy austenitic stainless steel grade 1Cr25Ni20Si2, these shields provide excellent resistance to oxidation, high-temperature corrosion, and thermal fatigue. The added silicon content enhances the steel’s oxidation resistance and structural stability in severe thermal environments. The semi-cylindrical design is precisely formed to contour the bend radius of return tubes, creating an effective barrier against particulate erosion, ash impact, and high-velocity gas flow. 1Cr25Ni20Si2 shields are ideal for thermal power generation and industrial systems exposed to oxidizing, carburizing, and dry corrosive atmospheres. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of 1Cr25Ni20Si2 Outer Half Round 90 Degree Bend Tube Shields, offering tailored configurations to meet diverse thermal protection requirements. 1Cr25Ni20Si2 Grade Chemical Composition – Austenitic Heat-Resistant Steel • Carbon (C): ≤ 0.15% • Manganese (Mn): ≤ 1.50% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.030% • Silicon (Si): 1.50 – 2.50% • Chromium (Cr): 24.0 – 26.0% • Nickel (Ni): 19.0 – 22.0% • Iron (Fe): Balance Applications: Suitable for high-temperature systems in boilers, reheaters, thermal incinerators, and petrochemical furnaces where resistance to oxidation, scaling, and heat-induced deformation is critical. Uses • Shields 90-degree curved tube sections in superheaters, reheaters, and economizers • Applied in high-temperature HRSG and WHRB coils exposed to harsh flue gases • Protects against scaling, oxidation, and high-velocity particulate erosion • Used in industrial furnaces, reformers, and exhaust gas boilers requiring thermal durability Features • Superior oxidation resistance – Silicon addition enhances resistance to scale formation at elevated temperatures • High-temperature performance – Withstands sustained thermal stress and cyclic heating • Structural stability – Maintains mechanical integrity during long-term high-temperature exposure • Accurate form – Manufactured to match specific bend radii and pipe sizes for full coverage • Flexible mounting – Can be installed using welding, banding, or mechanical clamps • Custom availability – Offered in various wall thicknesses, bend angles, lengths, and diameters Applications • Thermal power plants – Guards steam tubing and return bends from thermal wear and surface damage • Waste heat recovery units – Shields tube bends from high-temperature gas erosion • Petrochemical furnaces – Used in radiant coils and transfer lines operating at extreme temperatures • Metallurgical and cement industries – Protects heat exchange tubes exposed to oxidizing and abrasive conditions Conclusion The 1Cr25Ni20Si2 Outer Half Round 90 Degree Bend Tube Shield by Ladhani Metal Corporation provides high-performance protection in extreme heat environments where oxidation, scaling, and erosion pose critical challenges. Engineered for longevity and thermal resilience, these shields are ideal for demanding industrial applications. For specialized configurations, technical guidance, or material selection support, contact Ladhani Metal Corporation. #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Salem #Erode #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Hassan #Cuttack #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Gaya #Muzaffarpur #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier #SSShielding #IndustrialTubeShield #BoilerTubeGuard #CustomMetalParts #SteelIndustryIndia #MetalEngineering

Half Round Tube Shield Ladhani Metal Corporation manufactures 1Cr25Ni20Si2 Half Round Straight Tube Shields to deliver exceptional protection to straight boiler and heat exchanger tubes in aggressive high-temperature environments. 1Cr25Ni20Si2 Half Round Straight Tube Shield The 1Cr25Ni20Si2 Half Round Straight Tube Shield is fabricated in a semi-cylindrical form to protect the outer surface of straight tubes from scaling, tube wall thinning, and structural damage caused by hot combustion gases or ash-laden flows. Its high silicon content improves oxidation resistance and inhibits the formation of brittle scales, while the alloy’s high-temperature stability ensures long service life under cyclic heating and cooling operations. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of 1Cr25Ni20Si2 Half Round Straight Tube Shields, offering precise fit and durable tube protection across thermal and petrochemical industries. Material Grade 1Cr25Ni20Si2 – High-chromium, high-nickel heat-resistant alloy with enhanced silicon for improved oxidation and thermal shock resistance. Chemical Composition of 1Cr25Ni20Si2 • Carbon (C): ≤ 0.10% • Silicon (Si): 1.50 – 2.50% • Manganese (Mn): ≤ 1.50% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.030% • Chromium (Cr): 24.0 – 26.0% • Nickel (Ni): 19.0 – 22.0% • Iron (Fe): Balance Uses • Radiant section protection in waste heat boilers and reformers • Straight tube shielding in high-temperature furnaces • Heat recovery units in ammonia, hydrogen, and methanol plants • Erosion control in fluidized bed combustion systems Features • Excellent oxidation and scaling resistance at high temperatures • High thermal stability under long-term service • Superior resistance to carburization and sulfidation • Durable against erosion from high-velocity gas and ash • Maintains mechanical integrity under thermal shock • Custom-fabricated to match tube size, radius, and operational needs Applications • petrochemical and fertilizer plants – For reformer and convection section protection • power generation – In boilers, WHRBs, and waste incinerators • thermal process systems – For furnace and heat exchanger tube shielding • hydrogen and ammonia production – Suitable for synthesis gas environments • metallurgy – For steel reheating furnaces and heat treatment zones Conclusion 1Cr25Ni20Si2 Half Round Straight Tube Shields from Ladhani Metal Corporation are engineered for performance in the harshest high-temperature environments. Their robust composition and resistance to thermal and chemical degradation make them essential for extending the life of straight tubes exposed to extreme flue gas conditions. For orders, custom fabrication, and technical support, contact Ladhani Metal Corporation. #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Salem #Erode #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Hassan #Cuttack #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Gaya #Muzaffarpur #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier #SSShielding #IndustrialTubeShield #BoilerTubeGuard #CustomMetalParts #SteelIndustryIndia #MetalEngineering #HeavyIndustrySupply #StainlessSteelIndia #SteelExporters #MetalComponentExport #FabricatedProducts #SteelDealer #IndustrialSupplyIndia #BoilerTubeFittings #TubeShieldingSolutions #HalfTubeCover #HeatExchangerShield #halftubeshield #utypehalftubeshield #tubeshieldexporter

Half Round Tube Shield Ladhani Metal Corporation manufactures Cr25Ni20 Half Round Straight Tube Shields for use in high-temperature industrial environments where resistance to oxidation, carburization, and thermal fatigue is critical. Cr25Ni20 is a heat-resistant alloy with a high chromium (25%) and nickel (20%) content, offering excellent stability under prolonged exposure to high heat and corrosive flue gases. This alloy is widely used in boilers, reformers, waste heat recovery systems, and thermal process units. Cr25Ni20 Half Round Straight Tube Shield The Cr25Ni20 Half Round Straight Tube Shield is precisely shaped to fit the outer surface of straight heat exchanger or boiler tubes. It forms a durable, semi-cylindrical layer of protection against high-temperature scaling, tube thinning, and erosion caused by particulate-laden flue gas. The shield enhances tube longevity in radiation zones and areas prone to direct flame or high-velocity gas flow. Its excellent thermal shock resistance also makes it suitable for cyclic heating and cooling conditions. Ladhani Metal Corporation is a leading manufacturer, supplier, and exporter of Cr25Ni20 Half Round Straight Tube Shields, delivering robust thermal shielding solutions for critical tube protection. Material Grade Cr25Ni20 – High chromium-nickel heat-resistant alloy Chemical Composition of Cr25Ni20 • Carbon (C): ≤ 0.08% • Silicon (Si): ≤ 1.5% • Manganese (Mn): ≤ 2.0% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.030% • Chromium (Cr): 24.0 – 26.0% • Nickel (Ni): 19.0 – 22.0% • Iron (Fe): Balance Uses • Protection of boiler tubes in radiant and convection zones • Straight tube shielding in reformers and furnace outlets • High-temperature air and gas heater shielding • Application in coal gasification and petrochemical furnaces • Tube erosion prevention in thermal incineration units Features • Excellent high-temperature performance – Operates reliably above 1000°C • Resistant to oxidation and scale – Maintains surface integrity in oxidizing environments • Superior creep strength – Suitable for long-term service under thermal stress • Effective in carburizing atmospheres – Ideal for furnaces and gas reactors • Thermal fatigue resistance – Withstands repeated heating and cooling cycles • Custom fabrication – Available in multiple lengths, thicknesses, and diameters Applications • power generation boilers – Radiant zone tube protection • thermal cracking units – Resistant to flame impingement and high gas velocity • waste heat recovery boilers – Prolongs tube life in high-ash flue gas areas • fertilizer plants – Used in ammonia reformer tube protection • metallurgical furnaces – Shields exposed tubes in extreme temperature cycles Conclusion Cr25Ni20 Half Round Straight Tube Shields from Ladhani Metal Corporation offer outstanding durability and heat resistance, making them ideal for straight tubes operating in the most demanding high-temperature applications. Their high chromium and nickel content ensures reliable service where oxidation, erosion, and thermal cycling are a concern. For custom sizes, specifications, or technical consultations, contact Ladhani Metal Corporation. #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Salem #Erode #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Hassan #Cuttack #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Gaya #Muzaffarpur #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier #SSShielding #IndustrialTubeShield #BoilerTubeGuard #CustomMetalParts #SteelIndustryIndia #MetalEngineering #HeavyIndustrySupply #StainlessSteelIndia #SteelExporters #MetalComponentExport #FabricatedProducts #SteelDealer #IndustrialSupplyIndia #BoilerTubeFittings #TubeShieldingSolutions #HalfTubeCover #HeatExchangerShield #halftubeshield #utypehalftubeshield

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are specially engineered components used to safeguard boiler and heat exchanger tubes from damage due to high-temperature flue gases, particulate abrasion, and chemical scaling. Designed to fit over curved or straight tube surfaces, these shields are extensively used in power generation and industrial heating systems. The half-round design ensures streamlined installation and effective surface protection in high-wear regions. Cr25Ni20 Half Round Tube Shield for LTSH Tube The Cr25Ni20 Half Round Tube Shield is made from a high-temperature, high-chromium nickel alloy (containing approximately 25% chromium and 20% nickel) that offers superior resistance to oxidation, carburization, and sulfidation at elevated temperatures. This grade provides excellent mechanical stability and corrosion resistance, making it suitable for demanding environments such as Low Temperature Superheater (LTSH) zones in boilers. The Low Temperature Superheater (LTSH) is a section in a boiler where saturated steam from the steam drum is superheated to a moderately higher temperature before entering the high-temperature superheater stages. Positioned in areas with relatively lower flue gas temperatures, the LTSH helps improve thermal efficiency and reduces moisture content in steam. Due to constant exposure to abrasive flue gases and ash, LTSH tubes are prone to wear and require protective shielding, such as half round tube shields, to extend service life. Ladhani Metal Corporation is a reliable manufacturer, supplier, and exporter of Cr25Ni20 Half Round Tube Shields for LTSH systems, delivering heat- and corrosion-resistant solutions to enhance the durability of superheater tubes. Chemical Composition of Cr25Ni20 – High-Temperature Chromium-Nickel Alloy • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.50% • Chromium (Cr): 24.0 – 26.0% • Nickel (Ni): 19.0 – 22.0% • Iron (Fe): Balance Applications: Ideal for LTSH tubes in environments where protection against thermal fatigue, ash erosion, and high-temperature oxidation is critical. Uses • Shields LTSH tubes in coal-fired boilers and HRSGs from ash particle abrasion and flue gas scaling • Protects tube bends and convection sections in waste heat recovery boilers (WHRBs) • Suitable for industrial boilers in petrochemical plants and refineries • Extends the life of tubes in steam generators used in corrosive and high-heat zones • Effective in biomass plants, waste incineration boilers, and marine heating systems Features • Exceptional heat resistance – High chromium and nickel content ensures reliable performance in high-temperature boiler zones • Superior oxidation and corrosion resistance – Suitable for flue gas streams with corrosive components • Custom fabrication – Manufactured to match exact tube diameter, length, and curvature requirements • Easy to install – Supports weld-on, clamp-on, or banding installation methods • Enhances tube longevity – Reduces wear from fly ash, soot, and gas flow • Low maintenance – Helps reduce downtime and operational costs in heat exchanger and boiler systems Applications • thermal power plants – Protects LTSH tube surfaces from thermal degradation and ash erosion • chemical processing units – Shields process heater tubes from acidic and oxidizing gases • WHRBs and HRSGs – Used in tube bends and lower convection sections for abrasion and heat protection • petrochemical refineries – Ensures long service life of tubes under cyclic temperature exposure • waste-to-energy plants – Minimizes scaling and wear from contaminated flue gases Conclusion The Cr25Ni20 Half Round Tube Shield for LTSH Tube by Ladhani Metal Corporation – manufacturer, supplier, and exporter – is a robust shielding solution for high-temperature, corrosion-prone environments in thermal and industrial boilers. Offering outstanding oxidation resistance, thermal stability, and structural integrity, these shields are designed to protect LTSH tubes and improve system efficiency and longevity. For technical support, sizing options, or order inquiries, contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are precision-formed protective components used to guard boiler tubes, heat exchangers, and superheaters against flue gas erosion, fly ash abrasion, scaling, and thermal fatigue. These shields are widely used in power generation, chemical processing, and industrial steam systems to extend the operational life of tubing in high-wear zones. The half-round profile ensures easy fitment over straight or curved tubes, especially in areas exposed to turbulent gas flow and ash impact. 1Cr18Ni9Ti Half Round Tube Shield for LTSH Tube The 1Cr18Ni9Ti Half Round Tube Shield is manufactured from a titanium-stabilized austenitic stainless steel grade, equivalent to AISI 321. This material offers excellent resistance to intergranular corrosion and high-temperature oxidation while maintaining good mechanical strength. Its titanium content improves stability during welding and long-term thermal exposure, making it especially suitable for Low Temperature Superheater (LTSH) applications in boilers and heat recovery systems where steam tubes are subject to moderate heat, soot, and particulate attack. The Low Temperature Superheater (LTSH) is a section in a boiler where saturated steam from the steam drum is superheated to a moderately higher temperature before entering the high-temperature superheater stages. Positioned in areas with relatively lower flue gas temperatures, the LTSH helps improve thermal efficiency and reduces moisture content in steam. Due to constant exposure to abrasive flue gases and ash, LTSH tubes are prone to wear and require protective shielding, such as half round tube shields, to extend service life. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of 1Cr18Ni9Ti Half Round Tube Shields for LTSH systems, offering reliable and corrosion-resistant protection for thermal and energy-related applications. Chemical Composition of 1Cr18Ni9Ti – Titanium-Stabilized Austenitic Stainless Steel • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 17.0 – 19.0% • Nickel (Ni): 8.0 – 11.0% • Titanium (Ti): ≥ 5 × C% • Iron (Fe): Balance Applications: Ideal for LTSH areas and convection zones in boilers exposed to flue gas condensation, moderate corrosion, and thermal fatigue from cyclic operations. Uses • Installed on LTSH tubes to protect from scaling, soot erosion, and ash deposition in thermal power plants • Shields superheater coils and heat exchanger bends in WHRBs and HRSGs • Suitable for industrial boilers in chemical plants where acidic or chloride-bearing gases are present • Used in biomass and coal-fired systems to reduce wear on tube surfaces from fly ash and gas turbulence • Effective in marine and coastal steam generation systems with moisture and chloride exposure Features • Excellent intergranular corrosion resistance – Stabilized with titanium for weld integrity and long-term stability • High-temperature oxidation resistance – Performs well under cyclic heat exposure and oxidizing gas conditions • Custom fit – Manufactured to match exact tube diameter, curvature, and installation length • Easy to mount – Suitable for welding, clamping, or banding installation methods • Enhanced tube life – Reduces maintenance frequency and increases system efficiency • Available in various thicknesses, lengths, and bend radii as per operational needs Applications • thermal power stations – Protects LTSH tubes from scaling and ash erosion in flue gas zones • waste heat recovery units – Shields return tube bends and convection coils from abrasive flow • steam generation systems – Enhances tube life in low-temperature superheater environments • refinery boilers – Resists acidic gas effects and thermal stress in process heating units • utility boilers – Used in coal-fired and biomass-fired systems requiring long-term tube protection Conclusion The 1Cr18Ni9Ti Half Round Tube Shield for LTSH Tube by Ladhani Metal Corporation – manufacturer, supplier, and exporter – offers high-performance protection for boiler and superheater tubes in low-temperature, corrosive, and abrasive environments. With titanium stabilization and excellent thermal durability, it ensures extended service life and improved system reliability in a range of industrial and thermal applications. For customized designs, technical consultation, or pricing details, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are engineered to protect the surfaces of boiler tubes, superheaters, and heat exchanger coils from high-temperature corrosion, erosion, slag deposition, and scaling. Widely used in power generation, petrochemical, and industrial processing systems, these shields are fabricated with a half-round profile that allows quick installation over curved or straight tube surfaces, extending service life and minimizing repair and replacement needs. Cr23Ni13 U Type Inner Half Round Tube Shield The Cr23Ni13 U Type Inner Half Round Tube Shield is manufactured from a chromium-nickel austenitic alloy known for its excellent high-temperature resistance, structural stability, and corrosion resistance. It performs reliably under continuous thermal exposure and is well-suited for systems exposed to oxidizing, carburizing, and sulfur-rich gases. The inner U-type configuration is designed specifically to shield the inner arc of U-bend tubes, which are more susceptible to localized turbulence, thermal fatigue, and scale formation. • Inner U Type Half Round Tube Shield – Covers the internal curvature of U-bend tubes, providing targeted protection from flue gas erosion, thermal scaling, and corrosion. Ladhani Metal Corporation is a leading manufacturer, supplier, and exporter of Cr23Ni13 U Type Inner Half Round Tube Shields, offering precision-engineered solutions for high-performance thermal and chemical systems. Chemical Composition of Cr23Ni13 – Austenitic Heat-Resistant Steel • Carbon (C): ≤ 0.12% • Manganese (Mn): ≤ 1.50% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.50% • Chromium (Cr): 22.0 – 24.0% • Nickel (Ni): 12.0 – 14.0% • Iron (Fe): Balance Applications: Suitable for continuous exposure to high temperatures in oxidizing and chemically aggressive environments. Ideal for inner bend protection in return coil systems subjected to high thermal load and corrosive gas flow. Uses • Protects inner arcs of U-bend tubes in thermal power plant superheaters, reheaters, and economizers • Installed in WHRBs and HRSGs to resist scale and slag in return bends exposed to flue gas turbulence • Applied in steam reformers, process furnaces, and heat exchangers where inner tube surfaces face corrosive and hot gas impact • Used in chemical reactors and cracking units operating under cyclic thermal and chemical stress • Suitable for long-term protection of curved tubes in industrial combustion and heating equipment Features • High-temperature oxidation resistance – Performs in continuous service above 1000°C • Inner arc shielding – Targets protection for the most erosion-prone and heat-stressed tube area • Corrosion resistance – Withstands exposure to sulfur-rich gases, acidic vapors, and flue gas byproducts • Fabricated to specification – Available in custom sizes and bend radii for a precise fit and stable coverage • Simple installation – Can be secured using clamping, banding, or welding without disrupting the system • Extended service life – Reduces risk of tube failure, minimizes maintenance downtime, and improves system efficiency Applications • thermal and power generation – Protects inner U-bend surfaces from corrosion and erosion in steam circuits • petrochemical processing – Shields return bends in reformers and exchangers from hot process gases • waste heat recovery – Used in curved tubes of WHRBs and HRSGs for inner arc scale protection • chemical industry – Applied in reactors and thermal systems subjected to chemical vapors and high heat • furnace and incineration systems – Effective in resisting slag and gas-induced wear in industrial burners Conclusion The Cr23Ni13 U Type Inner Half Round Tube Shield by Ladhani Metal Corporation – manufacturer, supplier, and exporter – offers dependable inner arc protection for U-bend tubes operating in aggressive thermal and chemical environments. Its high-temperature and corrosion-resistant properties make it ideal for safeguarding critical process tubes across a range of high-performance industrial systems. For technical consultation, customized fabrication, or quotations, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are essential components used to protect heat exchanger tubes, boiler coils, and superheater assemblies from erosion, scaling, slag buildup, and high-temperature corrosion. Designed with a semi-cylindrical profile, they offer easy installation over straight or curved tube surfaces. These shields play a vital role in increasing service life, reducing tube maintenance, and ensuring the efficient operation of thermal systems across power generation, chemical processing, and petrochemical industries. 1Cr25Ni20Si2 U Type Inner Half Round Tube Shield The 1Cr25Ni20Si2 U Type Inner Half Round Tube Shield is fabricated from a high-temperature resistant chromium-nickel-silicon alloy steel. This grade offers excellent resistance to oxidation, sulfur corrosion, and thermal fatigue, even under prolonged exposure to temperatures above 1000°C. The inner U-type configuration is specifically designed to shield the internal curvature of U-bend tubes, a zone vulnerable to accelerated wear caused by flue gas turbulence, slag impact, and thermal cycling. • Inner U Type Half Round Tube Shield – Designed to cover the inside arc of U-bend tubes, offering protection from erosion, scale formation, and heat stress. Ladhani Metal Corporation is a reliable manufacturer, supplier, and exporter of 1Cr25Ni20Si2 U Type Inner Half Round Tube Shields, providing high-performance protective solutions for extreme temperature and chemically aggressive environments. Chemical Composition of 1Cr25Ni20Si2 – High Temperature Alloy Steel • Carbon (C): ≤ 0.20% • Manganese (Mn): ≤ 1.50% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.030% • Silicon (Si): 1.80 – 2.50% • Chromium (Cr): 24.0 – 26.0% • Nickel (Ni): 19.0 – 22.0% • Iron (Fe): Balance Applications: Suited for high-temperature environments with oxidizing, sulfurizing, or carburizing gases. Especially effective in boiler, furnace, and WHRB systems operating under cyclic thermal conditions. Uses • Installed on the inner arc of U-bend tubes in power plant boilers and superheaters exposed to slag and thermal stress • Protects curved tube bends in WHRBs, HRSGs, and reformers subjected to flue gas erosion and oxidation • Applied in heat exchangers and reactors operating in high-temperature and chemically active atmospheres • Used in furnace coils, metallurgical plants, and incinerators for protection from sulfur-laden and high-heat gas streams • Suitable for curved tube coils in petrochemical and process industries where scaling and corrosion are common Features • Excellent oxidation resistance – Performs effectively at continuous service temperatures up to 1100°C • Superior inner arc protection – Covers high-wear zones exposed to heat, slag, and turbulent gas flow • Enhanced thermal fatigue resistance – Designed for use in cyclic heating environments without distortion • Corrosion resistance – Withstands acid gases and sulfur-rich flue gases common in industrial combustion systems • Precision fitment – Fabricated to match specific tube sizes and bend radii for optimal protection and stability • Easy installation – Can be fixed using clamping, tack welding, or banding methods depending on system design Applications • power generation – Shields inner U-bend tubes in superheaters and reheaters from high-temperature erosion • waste heat recovery – Used in WHRBs and HRSGs to protect internal arcs against scaling and oxidation • petrochemical processing – Protects U-bend tubes in reformers and exchangers exposed to acidic gas streams • chemical industry – Ensures long-lasting performance in reactors and thermal processing equipment • metallurgical and furnace systems – Applied where high heat and slag exposure are routine Conclusion The 1Cr25Ni20Si2 U Type Inner Half Round Tube Shield by Ladhani Metal Corporation – manufacturer, supplier, and exporter – provides high-strength, heat-resistant shielding for the internal arcs of U-bend tubes operating in severe industrial environments. Its resistance to oxidation, corrosion, and thermal fatigue makes it a dependable solution for extending equipment life and performance under extreme conditions. For custom sizes, technical support, or pricing inquiries, please contact Ladhani Metal Corporation.