'critical gas fluid'

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are robust, precision-fabricated protective sleeves designed to guard the outer surfaces of tubes in boilers, heat exchangers, incinerators, and high-temperature processing equipment. Engineered to extend the service life of tubes exposed to corrosive gases, abrasive particulates, and elevated temperatures, these shields provide a reliable barrier against mechanical and chemical degradation. The half-round design facilitates easy installation while ensuring a secure, form-fitting layer of defense. 1Cr13 Half Round Tube Shield The 1Cr13 Half Round Tube Shield is a semi-cylindrical component manufactured from martensitic stainless steel containing approximately 13% chromium. Classified under the 1Cr13 grade, this alloy delivers good corrosion resistance, excellent wear performance, and moderate strength at elevated temperatures. It is especially suited for thermal environments that are not extremely oxidizing or carburizing but where erosion and mechanical wear are a concern. With a higher hardness potential through heat treatment and moderate thermal resistance, 1Cr13 shields are ideal for applications involving flue gas exposure, soot-laden atmospheres, and temperature cycling. The shield’s half-round configuration is precision-engineered for optimal tube coverage and long-term durability. It offers a balance of strength, corrosion resistance, and cost-effectiveness, making it suitable for a wide range of industrial processes. Chemical Composition of 1Cr13 – Martensitic Stainless Steel • Carbon (C): 0.15 – 0.20% • Silicon (Si): ≤ 1.00% • Manganese (Mn): ≤ 1.00% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.030% • Chromium (Cr): 12.0 – 14.0% • Nickel (Ni): ≤ 0.60% • Iron (Fe): Balance Uses • Boiler Tube Protection – Shields tube surfaces from flue gas erosion, ash particle abrasion, and soot buildup in economizers and waterwalls. • Heat Exchanger Tubes – Provides an extra layer of wear resistance in zones prone to mechanical stress and fluid turbulence. • Incinerator and Waste Heat Units – Guards tubes exposed to fluctuating temperatures, slag, and particulate deposits. • Cement Plant Piping – Protects tubing and ducts in kiln exhaust systems from abrasive dust and high flow velocity. • Air Preheaters and Recuperators – Enhances the durability of components subjected to temperature variations and corrosive gases. Features • Moderate Oxidation Resistance – Chromium content enables good performance in mildly oxidizing environments and intermittent exposure to high temperatures. • Wear and Abrasion Resistance – Martensitic structure offers high surface hardness and resistance to mechanical wear. • Heat Treatable – Can be hardened to increase durability and resistance to deformation. • Cost-Effective – Provides a lower-cost alternative to austenitic and superalloy shields for moderate service conditions. • High Dimensional Accuracy – Manufactured with tight tolerances to ensure secure fitment and uniform tube coverage. • Convenient Installation – Half-round shape enables quick mounting through welding or clamping techniques. • Versatile Finishing Options – Supplied with pickled or mechanically polished surfaces to improve corrosion resistance and adhesion. Applications • Power Generation – Used in economizer, preheater, and convection sections of boilers to prevent erosion and fouling. • Chemical and Fertilizer Plants – Protects exposed tube surfaces in systems with moderate chemical exposure. • Metallurgical Furnaces – Shields mechanical and flue components exposed to particulate movement and temperature cycling. • Pulp and Paper Industry – Used in recovery boilers and heat exchangers where corrosion resistance and mechanical strength are both required. • Petrochemical Plants – Applied in lower-temperature zones where scaling and erosion are primary concerns. Conclusion The 1Cr13 Half Round Tube Shield by Ladhani Metal Corporation provides an optimal solution for industrial tube protection in moderate temperature and corrosion environments. Its martensitic stainless steel composition ensures excellent wear resistance, good oxidation stability, and structural strength at a competitive cost. Designed for easy installation and reliable performance, these shields are ideal for various applications in power, process, and heat recovery systems. Custom-built to meet specific dimensions, material thicknesses, and finishing preferences, 1Cr13 tube shields offer dependable service life extension for critical heat transfer equipment. For technical specifications, pricing, or customization inquiries, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are expertly engineered components designed to extend the life of boiler and heat exchanger tubes by protecting them against high-temperature oxidation, flue gas erosion, and mechanical damage. These shields are essential in power generation, petrochemical, and process industries where tube integrity is critical for system reliability and operational safety. 1Cr18Ni9Ti Half Round Tube Shield The 1Cr18Ni9Ti Half Round Tube Shield is a semi-cylindrical protective cover manufactured from titanium-stabilized stainless steel grade 1Cr18Ni9Ti. This material is equivalent to AISI 321 and is known for its excellent resistance to intergranular corrosion, especially after welding or prolonged high-temperature exposure. The addition of titanium in the alloy stabilizes the microstructure and prevents chromium carbide precipitation, making it ideal for thermal systems operating between 400°C and 900°C. The shield’s half-round design allows for quick and secure installation over existing tubes, providing durable protection in aggressive industrial environments. Chemical Composition of 1Cr18Ni9Ti – Titanium-Stabilized Austenitic Stainless Steel • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 17.0 – 19.0% • Nickel (Ni): 8.0 – 11.0% • Titanium (Ti): ≥ 5 × C content • Iron (Fe): Balance Uses • Boiler Tube Protection – Guards tubes from high-temperature scaling and corrosion in superheater and reheater sections exposed to combustion gases. • Heat Exchanger Tubing – Reduces risk of thermal fatigue and corrosion in steam or process exchangers operating in elevated temperature zones. • Furnace Tube Shielding – Ideal for protecting radiant and convection zone tubes from oxidation and mechanical wear in refinery and chemical furnaces. • Petrochemical Piping – Prevents tube degradation in reformers, heaters, and gas coolers exposed to carburizing and oxidizing atmospheres. • Power Plant Steam Systems – Shields tubing in HRSGs and utility boilers operating under high-temperature and fluctuating load conditions. Features • Excellent Intergranular Corrosion Resistance – Titanium addition prevents carbide precipitation, making the shield ideal for welded and heat-cycled environments. • High-Temperature Stability – Performs effectively up to 850°C with consistent mechanical strength and oxidation resistance. • Austenitic Structure – Offers good ductility, toughness, and resistance to thermal shock and creep deformation. • Half-Round Precision Fit – Custom-formed to match tube diameters, ensuring tight coverage and easy field installation with clamps or welds. • Corrosion Protection – Withstands acidic flue gases, steam condensates, and other corrosive industrial byproducts. • Finishing Options – Supplied in bright annealed, pickled, or passivated finishes to suit operational and aesthetic needs. • Custom Dimensions – Available in various wall thicknesses, lengths, and diameters to suit different system designs and operating conditions. Applications • Thermal and Nuclear Power Plants – Protects boiler and superheater tubes from high-temperature stress and oxidation in base-load and cyclic operations. • Oil Refineries – Applied in fired heaters and reformers where tube protection from scale and corrosion is essential for system longevity. • Chemical Process Plants – Guards steam and fluid tubes in reactors and exchangers handling acidic or oxidizing media at high heat. • Fertilizer Industry – Shields ammonia converter and steam reforming tubes subjected to repeated thermal cycling. • Waste-to-Energy and Biomass Plants – Prevents erosion and degradation of tubes in flue gas zones with corrosive combustion byproducts. • Heat Recovery Steam Generators – Used in combined-cycle plants to extend the life of high-temperature steam tubing systems. Conclusion The 1Cr18Ni9Ti Half Round Tube Shield by Ladhani Metal Corporation is a superior-grade solution for tube protection in high-temperature, high-pressure, and corrosive industrial environments. Its titanium-stabilized austenitic structure offers outstanding resistance to intergranular corrosion, making it especially effective in welded applications and thermal systems exposed to fluctuating service conditions. Engineered for durability and precision, these shields help reduce maintenance costs, prevent tube failures, and ensure continuous, efficient system performance. With customizable sizes, expert fabrication, and reliable material traceability, Ladhani Metal Corporation is a trusted partner for advanced tube shielding solutions. For technical consultation, application support, or quotation requests, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are precision-formed protective components used to shield exposed tubes in boilers, heat exchangers, and high-temperature piping systems. Designed to withstand harsh environments, they provide long-term protection against corrosion, erosion, and thermal damage, significantly improving the operational life and reliability of industrial systems. SS 316 Half Round Tube Shield The SS 316 Half Round Tube Shield is a semi-cylindrical cover made from austenitic stainless steel grade 316. Known for its superior corrosion resistance and mechanical strength, SS 316 is especially effective in chloride-rich environments such as marine, chemical, and coastal processing industries. The shield is engineered to fit over existing tubes, acting as a barrier against high-temperature gases, steam erosion, and corrosive media. Its molybdenum-enriched composition enhances pitting and crevice corrosion resistance, making it ideal for aggressive applications. Chemical Composition of SS 316 – Austenitic Stainless Steel • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 16.0 – 18.0% • Nickel (Ni): 10.0 – 14.0% • Molybdenum (Mo): 2.0 – 3.0% • Iron (Fe): Balance Uses • Boiler Tube Protection – Provides a robust shield against corrosive flue gases, preventing tube thinning and extending service intervals in industrial boilers. • Heat Exchanger Tube Protection – Reduces erosion and scaling in process systems exposed to fluctuating temperatures and aggressive fluids. • Marine and Coastal Applications – Ideal for protecting piping and steam lines in saltwater environments where chloride-induced corrosion is a major concern. • Chemical Process Tubing – Shields tubes exposed to acidic or caustic compounds, minimizing localized corrosion and chemical wear. • Pharmaceutical and Food Plants – Protects steam and utility tubes while maintaining hygiene and resistance to cleaning agents and sanitizers. Features • Excellent Corrosion Resistance – Molybdenum addition enhances resistance to pitting, crevice corrosion, and chemical attack. • High Strength and Durability – Withstands mechanical stress and thermal cycling without deformation or degradation. • Precision Fit – Half-round profile allows easy installation and secure fitting over tubes with minimal disruption to system performance. • Hygienic Material – Non-reactive and easy to clean, suitable for environments requiring sanitary conditions. • Customizable – Available in a variety of wall thicknesses, diameters, lengths, and mounting styles to meet specific operational needs. • Optional Finishes – Pickled, passivated, and bright annealed surface finishes available for improved appearance and added protection. Applications • Power Generation Boilers – Used in high-pressure steam systems to shield tubes from gas erosion and oxidation. • Chemical Processing Units – Protects tubes in acidic, alkaline, and oxidizing environments across chemical plants and refineries. • Marine Boilers and Engines – Installed on tubes and exhaust lines in marine vessels to resist chloride-induced corrosion. • Pharmaceutical Facilities – Suitable for clean steam systems and sterile environments requiring high resistance to chemical sanitizers. • Food and Beverage Industry – Used in pasteurization, CIP lines, and steam piping where corrosion resistance and cleanliness are essential. • Desalination Plants – Guards tubing systems in brine and saltwater processing units against aggressive corrosion and scaling. Conclusion The SS 316 Half Round Tube Shield by Ladhani Metal Corporation is an advanced protective solution for critical tubing systems operating in corrosive and high-temperature environments. Its enhanced chemical resistance, mechanical strength, and adaptability to sanitary and marine conditions make it an ideal choice for industries requiring long-term reliability and safety. Designed with precision and manufactured to meet strict industrial standards, these shields ensure prolonged tube life, reduced downtime, and improved system performance. Custom-fabricated to match your application, Ladhani Metal Corporation provides dependable shielding solutions trusted across industries worldwide. For detailed specifications, inquiries, or custom orders, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are specially designed components used to protect boiler and heat exchanger tubes from erosion, wear, and high-temperature damage. Manufactured with precision and expertise, these shields ensure enhanced tube life, reduced maintenance, and efficient operation in demanding industrial environments. SS 304L Half Round Tube Shield The SS 304L Half Round Tube Shield is a semi-circular protective cover made from high-quality stainless steel grade 304L. It is widely used in thermal and mechanical systems where tube surfaces are exposed to harsh operating conditions. The lower carbon content in SS 304L offers enhanced weldability and minimizes the risk of carbide precipitation, making it ideal for high-temperature and corrosive environments. The half-round design allows for easy installation over tubes while ensuring robust protection from flue gases, abrasives, and thermal stress. Manufactured using stainless steel grade 304L, these half-round tube shields are semi-cylindrical covers that are clamped or welded over exposed tubes. The “L” in SS 304L denotes “Low Carbon,” which offers improved resistance to sensitization during welding or prolonged exposure to elevated temperatures, making it more suitable for high-temperature and corrosive conditions compared to standard SS 304. The shields are formed with precision to ensure a snug fit over tubes and provide maximum protection without disrupting heat transfer or fluid flow. Chemical Composition of SS 304L – Austenitic Stainless Steel • Carbon (C): ≤ 0.030% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 18.0 – 20.0% • Nickel (Ni): 8.0 – 12.0% • Iron (Fe): Balance Applications: Widely used in boilers, heat exchangers, steam lines, and furnaces due to its excellent corrosion resistance, weldability, and performance in high-temperature service conditions. Uses – SS 304L Half Round Tube Shield • Boiler Tube Protection – Used to safeguard boiler tubes from high-temperature flue gases, ash erosion, and abrasive particles, ensuring extended service life and reduced downtime. • Heat Exchanger Tube Shielding – Protects heat exchanger tubes from corrosive process fluids and turbulent flow, helping to maintain performance and reduce maintenance frequency. • Furnace Gas Flow Wear Prevention – Installed in furnace environments where high-velocity gases and thermal cycling can cause severe tube wear, acting as a durable barrier. • Petrochemical & Refinery Applications – Shields critical tubing in high-temperature and chemically aggressive environments, improving resistance to oxidation and corrosion. Applications – SS 304L Half Round Tube Shield • Thermal Power Stations – Ideal for boiler systems and superheater tubes exposed to extreme thermal and flow conditions. • Refineries & Petrochemical Plants – Used in cracking units, reformers, and reactors where temperature and corrosion challenges are common. • Heat Recovery Steam Generators (HRSGs) – Enhances protection of tubes in combined cycle power plants and improves system reliability. • Chemical Processing Units – Prevents corrosion and surface degradation in harsh chemical flow environments. • Pulp and Paper Industry – Protects process tubes in digesters, recovery boilers, and steam-generating systems. • Industrial Boilers and Steam Systems – Ensures long-lasting tube integrity in high-pressure and high-temperature steam applications. Benefits • Extended Tube Life: Reduces repair frequency and tube replacement cycles. • Cost Efficiency: Minimizes downtime and maintenance-related expenses. • Reliable Performance: Maintains mechanical integrity under fluctuating temperatures and pressure conditions. • Sustainability: Enhances energy efficiency by maintaining consistent heat transfer performance. Conclusion The SS 304L Half Round Tube Shield by Ladhani Metal Corporation is an ideal solution for protecting critical tube systems in aggressive and high-temperature environments. Designed for high performance and long-lasting reliability, these shields help extend the lifespan of tubing systems while reducing downtime and maintenance costs. With customizable options, premium materials, and expert fabrication, Ladhani Metal Corporation is your trusted partner in tube protection solutions. For more details, inquiries, or to request a quote, please contact Ladhani Metal Corporation.

DIN 2634 carbon steel flanges PN 25 are high-strength weld neck flanges manufactured according to the DIN 2634 standard. Specifically designed for use in high-pressure piping systems operating up to 25 bar (362 psi), these flanges offer excellent mechanical performance and are suitable for a wide range of industrial applications. Manufactured from quality carbon steel, they provide strong, durable, and cost-effective solutions for systems where corrosion resistance requirements are moderate but structural integrity is critical. Ladhani Metal Corporation is a recognized manufacturer and global supplier of carbon steel flanges, known for precision engineering, strict adherence to international standards, and advanced production capabilities. Each flange is subject to comprehensive testing and inspection to ensure reliability and consistent performance under demanding operating conditions. Pressure Rating: • PN 25 (25 bar / 362 psi): Suitable for medium to high-pressure applications where strength and impact resistance are essential. Flange Type: • Weld Neck Flanges Designed with a tapered hub to ensure smooth transition from flange to pipe, weld neck flanges are ideal for systems experiencing frequent thermal cycling, pressure fluctuations, and mechanical stress. • Flat Face (FF) Flanges Recommended for use with gaskets made from soft materials or when connecting to cast iron components, flat face flanges ensure even gasket compression and reliable sealing performance. Carbon Steel Grades and Typical Composition: Carbon Steel (ASTM A105 / C22.8 equivalent) – Forged Carbon Steel • Carbon (C): ≤ 0.35% • Manganese (Mn): 0.60 – 1.05% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.040% • Silicon (Si): 0.10 – 0.35% • Iron (Fe): Balance Applications: Commonly used in oil and gas, petrochemical, water transmission, and power generation industries, especially in applications where high mechanical strength and pressure handling are more critical than corrosion resistance. Applications of DIN 2634 Carbon Steel Flanges PN 25: • Oil and Gas Pipelines Widely used in upstream and downstream systems for fluid transport under high pressure. • Petrochemical and Refining Plants Efficiently handles high-pressure flow systems involving hydrocarbons and steam. • Power Plants and Boiler Systems Suited for high-pressure steam and water lines, offering excellent tensile strength and fatigue resistance. • Water and Wastewater Infrastructure Used in municipal and industrial pipelines requiring cost-effective, robust flange connections. • General Industrial Systems Applicable in a wide range of mechanical systems and processing plants handling non-corrosive or mildly corrosive media. Key Features: • Compliant with DIN 2634 pressure and dimensional standards • PN 25 rating ensures compatibility with high-pressure pipelines • High tensile and yield strength for demanding structural requirements • Weld neck design enhances resistance to vibration and thermal expansion • Cost-effective solution for pressure-bearing connections • Available in standard and custom sizes, surface finishes, and pressure ratings • Heat treatment and coating options available upon request Conclusion: DIN 2634 carbon steel flanges PN 25 from Ladhani Metal Corporation provide a robust and economical solution for high-pressure systems where mechanical performance is essential. Their strength, reliability, and adaptability make them a preferred choice across industries such as oil and gas, power generation, and water infrastructure. For technical specifications, custom configurations, or pricing, contact Ladhani Metal Corporation today.

DIN 2634 titanium flanges PN 25 are high-performance weld neck flanges manufactured in accordance with the DIN 2634 standard. Specifically engineered for high-pressure applications up to 25 bar (362 psi), these flanges are made from premium titanium grades, offering exceptional corrosion resistance, low density, and outstanding mechanical strength even in the most demanding environments. Their lightweight yet highly durable nature makes them ideal for aggressive service conditions where conventional metal flanges may fail. Ladhani Metal Corporation is a trusted global manufacturer and supplier of titanium flanges, known for advanced manufacturing capabilities, precision machining, and strict adherence to international quality standards. Each flange undergoes thorough inspection and testing to ensure long-term reliability, safety, and resistance to extreme operating conditions. Pressure Rating: • PN 25 (25 bar / 362 psi): Designed for high-pressure systems requiring corrosion-resistant and mechanically robust flange connections. Flange Type: • Weld Neck Flanges Featuring an extended tapered hub, weld neck flanges provide excellent stress distribution at the base, ensuring strong and leak-proof joints in systems exposed to high pressure and thermal cycling. • Flat Face (FF) Flanges Ideal for use with softer gasket materials or in systems connecting to cast components, flat face flanges offer consistent and uniform gasket compression. Titanium Grades and Typical Composition: Titanium Grade 2 (UNS R50400) – Commercially Pure Titanium • Titanium (Ti): ≥ 98.9% • Iron (Fe): ≤ 0.30% • Oxygen (O): ≤ 0.25% • Carbon (C): ≤ 0.08% • Nitrogen (N): ≤ 0.03% • Hydrogen (H): ≤ 0.015% Applications: Preferred in seawater service, chemical processing, and marine equipment where high corrosion resistance in oxidizing environments is required. Titanium Grade 5 (Ti-6Al-4V / UNS R56400) – Alloyed Titanium • Titanium (Ti): Balance • Aluminum (Al): 5.5 – 6.75% • Vanadium (V): 3.5 – 4.5% • Iron (Fe): ≤ 0.40% • Oxygen (O): ≤ 0.20% Applications: Used in high-strength and high-temperature applications, including aerospace systems, pressure vessels, and heat exchangers due to its superior strength-to-weight ratio and fatigue resistance. Applications of DIN 2634 Titanium Flanges PN 25: • Offshore and Marine Systems Resists corrosion from seawater and brine solutions while maintaining strength under pressure. • Chemical and Petrochemical Processing Ideal for transporting corrosive media such as chlorine, acids, and alkalis at elevated pressures. • Desalination Plants Performs exceptionally in salt-laden and high-pressure water processing systems. • Aerospace and Defense Equipment Used in high-performance fluid systems requiring lightweight and high-strength components. • Pharmaceutical and Medical Systems Applied in ultra-clean and sterile environments where corrosion-free operation is essential. Key Features: • Manufactured in accordance with DIN 2634 dimensional and pressure requirements • PN 25 pressure rating supports high-pressure applications • Lightweight construction reduces system weight without compromising strength • Exceptional resistance to corrosion, erosion, and high-temperature oxidation • Weld neck configuration ensures strong, vibration-resistant joints • Available in commercially pure and alloyed titanium grades • Custom sizes, pressure classes, and surface finishes available upon request Conclusion: DIN 2634 titanium flanges PN 25 from Ladhani Metal Corporation are engineered to perform in extreme conditions where high pressure, aggressive media, and corrosion resistance are critical. With superior mechanical strength and long-term durability, these titanium flanges are ideal for advanced applications in marine, chemical, aerospace, and industrial systems. For technical consultations, specialized requirements, or pricing information, contact Ladhani Metal Corporation today.

DIN 2634 stainless steel flanges PN 25 are precision-engineered weld neck flanges designed and manufactured in accordance with the DIN 2634 standard. These flanges are suitable for high-pressure pipeline systems operating up to 25 bar (362 psi), providing robust and secure connections for a variety of critical industrial applications. Constructed from high-quality stainless steel grades such as 304, 316, and 321, these flanges offer excellent mechanical properties, enhanced corrosion resistance, and dependable performance in aggressive service conditions. Ladhani Metal Corporation is a globally recognized manufacturer and supplier of stainless steel flanges, known for delivering high-precision products that meet stringent international quality and dimensional standards. Each flange undergoes rigorous testing and quality checks to ensure optimal performance, safety, and longevity under high-pressure conditions. Pressure Rating: • PN 25 (25 bar / 362 psi): Engineered for high-pressure environments requiring reinforced flange connections with reliable resistance to corrosion and mechanical stress. Flange Type: • Weld Neck Flanges Incorporating a long tapered hub, weld neck flanges help maintain pipe alignment, reduce stress concentration at the weld joint, and enable smooth fluid flow with minimal turbulence. • Flat Face (FF) Flanges Ideal for systems utilizing soft gaskets or cast components, flat face flanges promote consistent gasket compression and sealing integrity. Stainless Steel Grades and Typical Composition: Stainless Steel 304 • Chromium (Cr): 18.0 – 20.0% • Nickel (Ni): 8.0 – 10.5% • Carbon (C): ≤ 0.08% (304), ≤ 0.03% (304L) • Manganese (Mn): ≤ 2.0% • Silicon (Si): ≤ 1.0% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.03% • Iron (Fe): Balance Applications: Suitable for general-purpose piping systems in environments with moderate corrosion exposure, including potable water and light-duty process lines. Stainless Steel 316 • Chromium (Cr): 16.0 – 18.0% • Nickel (Ni): 10.0 – 14.0% • Molybdenum (Mo): 2.0 – 3.0% • Carbon (C): ≤ 0.08% (316), ≤ 0.03% (316L) • Manganese (Mn): ≤ 2.0% • Silicon (Si): ≤ 1.0% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.03% • Iron (Fe): Balance Applications: Ideal for systems exposed to chlorides, cleaning agents, or other corrosive substances such as in chemical processing, pharmaceuticals, and marine environments. Stainless Steel 321 • Chromium (Cr): 17.0 – 19.0% • Nickel (Ni): 9.0 – 12.0% • Titanium (Ti): ≥ 5 × C (typically 0.20 – 0.70%) • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.0% • Silicon (Si): ≤ 1.0% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.03% • Iron (Fe): Balance Applications: Frequently used in high-temperature services such as thermal processing equipment, exhaust systems, and heat exchangers due to its stability against intergranular corrosion. Applications of DIN 2634 Stainless Steel Flanges PN 25: • Chemical Processing Units Handles higher operating pressures in systems transporting acids, alkalis, and solvents. • Marine and Offshore Installations Resistant to pressure fluctuations and saltwater corrosion in offshore piping networks. • Pharmaceutical and Biotech Plants Used in clean process environments where both pressure integrity and corrosion resistance are critical. • Industrial Steam and Thermal Systems Suitable for steam distribution and thermal expansion pipelines operating under high pressure. • Power Generation Facilities Applied in turbine piping, heat recovery systems, and pressurized cooling water circuits. Key Features: • Manufactured to DIN 2634 dimensional and pressure specifications • PN 25 pressure rating supports high-pressure operation • Weld neck design ensures leak-tight, stress-resistant connections • Available in stainless steel grades 304, 316, 321 and their low-carbon variants • Superior resistance to high-temperature corrosion and chemical attack • Long-term mechanical strength and fatigue resistance • Custom sizes, finishes, and pressure ratings available upon request Conclusion: DIN 2634 stainless steel flanges PN 25 from Ladhani Metal Corporation are engineered for high-performance use in high-pressure industrial environments where safety, corrosion resistance, and durability are paramount. These flanges are ideal for chemical, marine, thermal, and high-purity applications requiring strong, leak-resistant, and corrosion-resistant connections. For technical support, customized solutions, or pricing details, contact Ladhani Metal Corporation today.

DIN 2633 super duplex steel flanges PN 16 are high-performance weld neck flanges manufactured in accordance with the DIN 2633 standard. Engineered for medium-pressure piping systems with a pressure rating of up to 16 bar (232 psi), these flanges are made from super duplex stainless steels, which offer a superior combination of high mechanical strength and outstanding corrosion resistance. They are specifically designed for critical applications in aggressive environments where standard stainless or duplex steels may not provide sufficient durability. Ladhani Metal Corporation is a globally recognized manufacturer and supplier of super duplex steel flanges, known for precision manufacturing, strict quality control, and compliance with international material and dimensional standards. Each flange is tested for performance, safety, and resistance to harsh operating conditions. Pressure Rating: • PN 16 (16 bar / 232 psi): Suitable for systems requiring secure, corrosion-resistant, and high-strength connections under moderate pressure. Flange Type: • Weld Neck Flanges Featuring a long tapered hub, these flanges offer optimal stress distribution, reduce turbulence at the joint, and ensure reliable pipe alignment in high-stress environments. • Flat Face (FF) Flanges Designed for uniform gasket compression, particularly effective when used with soft gaskets or cast iron mating components. Super Duplex Steel Grades and Full Composition: Super Duplex 2507 (UNS S32750) • Chromium (Cr): 24.0 – 26.0% • Nickel (Ni): 6.0 – 8.0% • Molybdenum (Mo): 3.0 – 5.0% • Nitrogen (N): 0.24 – 0.32% • Manganese (Mn): ≤ 1.2% • Silicon (Si): ≤ 0.8% • Carbon (C): ≤ 0.03% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.02% • Iron (Fe): Balance Applications: Ideal for offshore platforms, subsea systems, desalination plants, chemical process systems, and high-chloride environments requiring superior corrosion and pitting resistance. Super Duplex S32760 • Chromium (Cr): 24.0 – 26.0% • Nickel (Ni): 6.0 – 8.0% • Molybdenum (Mo): 3.0 – 4.0% • Tungsten (W): 0.5 – 1.0% • Copper (Cu): 0.5 – 1.0% • Nitrogen (N): 0.2 – 0.3% • Carbon (C): ≤ 0.03% • Iron (Fe): Balance Applications: Commonly used in seawater systems, heat exchangers, fire-fighting systems, and oil & gas equipment due to excellent resistance to erosion, stress corrosion cracking, and fatigue. Applications of DIN 2633 Super Duplex Steel Flanges PN 16: • Offshore Oil and Gas Platforms Resists chloride-induced corrosion and high mechanical loads in topside and subsea installations. • Desalination and Marine Systems Performs well in high-salinity environments where other alloys may suffer from pitting or crevice corrosion. • Chemical and Petrochemical Plants Suitable for handling strong acids, caustic solutions, and oxidizing environments at elevated temperatures and pressures. • Fire Protection and Water Injection Systems Ensures reliability and corrosion resistance in safety-critical and high-pressure fluid delivery systems. • Pulp and Paper Industry Used in bleach plant systems and recovery boilers where exposure to corrosive agents is routine. Key Features: • Manufactured in compliance with DIN 2633 standards • PN 16 pressure rating for medium-pressure service • Weld neck design ensures secure, vibration-resistant connections • Available in high-strength super duplex grades S32750 and S32760 • Excellent resistance to pitting, crevice corrosion, and stress corrosion cracking • High mechanical strength and fatigue resistance • Custom sizes, coatings, and pressure classes available upon request Conclusion: DIN 2633 super duplex steel flanges PN 16 from Ladhani Metal Corporation are designed to meet the most demanding operational requirements in highly corrosive and high-pressure environments. With unmatched strength and corrosion resistance, these flanges are ideal for offshore, marine, chemical, and industrial applications. For technical specifications, custom designs, or pricing information, contact Ladhani Metal Corporation today.

DIN 2633 Inconel flanges PN 16 are precision-engineered weld neck flanges manufactured to the DIN 2633 standard, specifically designed for use in high-temperature and highly corrosive industrial environments. These flanges offer secure, pressure-resistant connections for pipeline systems operating at up to 16 bar (232 psi). Fabricated from premium Inconel alloys such as 600, 625, and 718, they provide excellent resistance to oxidation, thermal stress, and corrosive chemicals, making them ideal for extreme service conditions across various industries. Ladhani Metal Corporation is a trusted global supplier and manufacturer of Inconel flanges, known for its commitment to material integrity, precision engineering, and strict compliance with international quality standards. Each flange is subjected to thorough inspections to meet performance, safety, and durability expectations. Pressure Rating: • PN 16 (16 bar / 232 psi): Suitable for high-performance pipeline systems requiring resistance to thermal cycling, corrosion, and pressure fluctuation. Flange Type: • Weld Neck Flanges Long tapered hub design ensures smooth fluid transitions and reduces mechanical stress at the base, offering strong and vibration-resistant joints. • Flat Face (FF) Flanges Promotes even gasket loading and is compatible with soft or cast-mating components, enhancing sealing efficiency and system longevity. Inconel Grades and Full Composition: Inconel 600 • Nickel (Ni): ≥ 72.0% • Chromium (Cr): 14.0 – 17.0% • Iron (Fe): 6.0 – 10.0% • Carbon (C): ≤ 0.15% • Manganese (Mn): ≤ 1.0% • Silicon (Si): ≤ 0.5% • Sulfur (S): ≤ 0.015% Applications: Ideal for high-temperature furnace components, chemical processing, and food equipment exposed to acidic and alkaline environments. Inconel 625 • Nickel (Ni): 58.0% min • Chromium (Cr): 20.0 – 23.0% • Molybdenum (Mo): 8.0 – 10.0% • Niobium (Nb) + Tantalum (Ta): 3.15 – 4.15% • Iron (Fe): ≤ 5.0% • Carbon (C): ≤ 0.10% • Manganese (Mn): ≤ 0.5% • Silicon (Si): ≤ 0.5% Applications: Suitable for seawater systems, offshore oil and gas equipment, aerospace ducting, and high-strength chemical processing. Inconel 718 • Nickel (Ni): 50.0 – 55.0% • Chromium (Cr): 17.0 – 21.0% • Iron (Fe): Balance • Niobium (Nb) + Tantalum (Ta): 4.75 – 5.5% • Molybdenum (Mo): 2.8 – 3.3% • Titanium (Ti): 0.65 – 1.15% • Aluminum (Al): 0.2 – 0.8% • Carbon (C): ≤ 0.08% Applications: Extensively used in aerospace engines, turbine components, cryogenic storage tanks, and high-strength fasteners due to excellent fatigue, creep, and rupture resistance. Applications of DIN 2633 Inconel Flanges PN 16: • Petrochemical and Refining Industries Withstands exposure to high-temperature hydrocarbons, acids, and corrosive gases. • Marine and Offshore Installations Corrosion-resistant in saltwater and high-pressure environments, ideal for subsea and topside systems. • Aerospace and Power Generation Used in turbine and exhaust systems where strength retention at elevated temperatures is critical. • Chemical Processing Plants Stable under acidic, oxidizing, and reducing agents in continuous and batch processing systems. • Heat Exchangers and Reactors Reliable performance in thermal cycling and aggressive fluid handling applications. Key Features: • Designed in accordance with DIN 2633 specifications • Rated PN 16 for secure medium-pressure operation • Weld neck design improves alignment and minimizes mechanical stress • Available in Inconel grades 600, 625, and 718 • Exceptional resistance to high-temperature oxidation and corrosion • High tensile strength and fatigue resistance under mechanical loads • Tailored dimensions, surface finishes, and specifications available upon request Conclusion: DIN 2633 Inconel Flanges PN 16 from Ladhani Metal Corporation are engineered to meet the toughest demands of modern industry. Offering excellent resistance to high-temperature and corrosive environments, these flanges made from Inconel 600, 625, and 718 are ideal for critical applications across aerospace, petrochemical, marine, and power generation sectors. For detailed product options, technical support, or a customized quote, contact Ladhani Metal Corporation today.