Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are designed to protect boiler coils, heat exchanger tubes, and superheaters from erosion, scaling, slag deposition, and high-temperature damage. These shields are used extensively in thermal power plants, waste heat recovery systems, and process industries to extend tube life, reduce maintenance costs, and maintain thermal efficiency. Their semi-cylindrical design allows for easy and secure installation over straight or curved tube surfaces. 1Cr13 U Type Inner Half Round Tube Shield The 1Cr13 U Type Inner Half Round Tube Shield is fabricated from martensitic stainless steel 1Cr13, offering good mechanical strength, moderate corrosion resistance, and excellent wear resistance. This grade performs well in thermal systems subject to moderate chemical exposure and mechanical erosion. The inner U-type configuration is engineered to shield the inner arc of U-bend tubes, where turbulent flow, thermal cycling, and slag buildup are most intense and damaging. • Inner U Type Half Round Tube Shield – Covers the internal curvature of U-bend tubes, protecting against erosion, slag impact, and thermal degradation in high-flow areas. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of 1Cr13 U Type Inner Half Round Tube Shields, offering durable and cost-effective solutions for general-purpose heat protection in industrial systems. Chemical Composition of 1Cr13 – Martensitic Stainless Steel • Carbon (C): ≤ 0.15% • Manganese (Mn): ≤ 1.00% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 12.0 – 14.0% • Iron (Fe): Balance Applications: Suitable for moderately corrosive and abrasive environments with thermal exposure, where strength and erosion resistance are required. Uses • Installed on the inner arc of U-bend tubes in boilers and reheaters to resist erosion from flue gas flow • Shields inner bends in WHRBs and HRSGs subjected to scale buildup and thermal fatigue • Applied in curved tube sections of heat exchangers and evaporators operating under fluctuating temperatures • Used in process industries for protection against moderate corrosion and mechanical wear • Ideal for thermal units in power, petrochemical, and refining applications Features • Good wear and erosion resistance – Suitable for high-velocity gas flow zones • Inner arc protection – Shields critical U-bend areas where slag, turbulence, and thermal load are most severe • Moderate corrosion resistance – Performs well in mildly aggressive gas environments • Tailored fit – Custom-fabricated to match tube size and bend radius for precise protection • Easy installation – Compatible with clamp-on, weld-on, or banding methods • Cost-effective – An economical solution for routine protection of thermal system tube bends Applications • power generation – Inner U-bend protection in superheaters and economizers facing gas flow and scaling • waste heat recovery – Used in WHRBs to protect return bends from erosion and thermal damage • petrochemical processing – Applied in internal bends of steam reformers and exchangers • chemical industry – Suitable for use in reactors and thermal units operating under moderate heat and chemical exposure • industrial furnaces – Protects tube bends from slag deposits and temperature fluctuations Conclusion The 1Cr13 U Type Inner Half Round Tube Shield by Ladhani Metal Corporation – manufacturer, supplier, and exporter – offers reliable protection for U-bend tubes exposed to moderate thermal and erosive conditions. With its martensitic strength, wear resistance, and affordable performance, it is well-suited for a wide range of thermal and industrial process applications. For custom sizes, technical guidance, or quotations, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are protective components designed to guard heat exchanger coils, boiler tubes, and superheater assemblies from erosion, high-temperature scaling, slag accumulation, and corrosion. These shields are vital in high-performance industrial systems, including power plants, refineries, and chemical process units. Their half-round shape allows easy installation on both straight and curved tubes, improving system longevity while minimizing downtime and maintenance frequency. 1Cr20Ni14Si2 U Type Inner Half Round Tube Shield The 1Cr20Ni14Si2 U Type Inner Half Round Tube Shield is manufactured using a high-temperature austenitic stainless steel alloy with enhanced chromium, nickel, and silicon content. This alloy delivers excellent oxidation resistance, thermal fatigue resistance, and structural stability at elevated temperatures. The inner U-type configuration is tailored to cover the inner arc of U-bend tubes, offering critical protection where high-velocity gas, turbulence, and slag deposits can rapidly wear or degrade tube surfaces. • Inner U Type Half Round Tube Shield – Designed to protect the inner curvature of U-bend tubes from scaling, erosion, and heat-related damage in thermal systems. Ladhani Metal Corporation is a leading manufacturer, supplier, and exporter of 1Cr20Ni14Si2 U Type Inner Half Round Tube Shields, delivering high-performance shielding solutions for demanding high-temperature environments. Chemical Composition of 1Cr20Ni14Si2 – High Chromium-Nickel-Silicon Heat-Resistant Alloy • Carbon (C): ≤ 0.20% • Manganese (Mn): ≤ 1.50% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.030% • Silicon (Si): 1.80 – 2.50% • Chromium (Cr): 19.0 – 21.0% • Nickel (Ni): 13.0 – 15.0% • Iron (Fe): Balance Applications: Ideal for continuous high-temperature operations involving oxidizing or sulfur-containing gases. Well-suited for applications requiring excellent heat resistance and minimal thermal deformation. Uses • Shields inner arcs of U-bend tubes in boilers and superheaters operating at elevated temperatures • Installed in WHRBs and HRSGs to prevent scaling, slag, and erosion in internal tube bends • Used in curved coils in reformers and process heaters exposed to hot gas and thermal cycling • Protects tube bends in chemical reactors, incinerators, and industrial furnaces from oxidation and surface degradation • Effective in systems where stability at high temperatures and resistance to carburizing and sulfidizing environments are essential Features • Excellent high-temperature performance – Withstands long-term exposure to temperatures exceeding 1000°C • Inner arc coverage – Precisely shields erosion-prone internal tube bends in critical heat transfer zones • Superior oxidation and scaling resistance – Resists corrosion in aggressive combustion gas atmospheres • Custom-fit design – Fabricated according to specified tube radii and diameters for optimal coverage and secure fit • Quick and secure installation – Compatible with clamping, banding, or tack welding methods • Long operational life – Reduces the frequency of tube failures, improving reliability and plant efficiency Applications • power plants – Installed on U-bend tubes in superheaters and reheaters facing continuous high-temperature service • petrochemical plants – Protects inner arcs of tubes in reformers and gas processing heat exchangers • waste heat recovery – Shields return bends in WHRBs and HRSGs exposed to hot flue gas and slag • thermal processing – Applied in furnaces and incinerators where hot combustion gases affect internal tube surfaces • chemical industry – Guards against oxidizing and corrosive gas damage in curved tube sections of reactors Conclusion The 1Cr20Ni14Si2 U Type Inner Half Round Tube Shield by Ladhani Metal Corporation – manufacturer, supplier, and exporter – is a robust and heat-resistant solution for protecting U-bend tubes in high-temperature and chemically aggressive conditions. Its high alloy composition, excellent thermal resistance, and customized fitment make it ideal for enhancing tube performance and reliability in critical thermal systems. For technical specifications, customized fabrication, or quotations, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are engineered to protect the surfaces of boiler tubes, superheaters, and heat exchanger coils from high-temperature corrosion, erosion, slag deposition, and scaling. Widely used in power generation, petrochemical, and industrial processing systems, these shields are fabricated with a half-round profile that allows quick installation over curved or straight tube surfaces, extending service life and minimizing repair and replacement needs. Cr23Ni13 U Type Inner Half Round Tube Shield The Cr23Ni13 U Type Inner Half Round Tube Shield is manufactured from a chromium-nickel austenitic alloy known for its excellent high-temperature resistance, structural stability, and corrosion resistance. It performs reliably under continuous thermal exposure and is well-suited for systems exposed to oxidizing, carburizing, and sulfur-rich gases. The inner U-type configuration is designed specifically to shield the inner arc of U-bend tubes, which are more susceptible to localized turbulence, thermal fatigue, and scale formation. • Inner U Type Half Round Tube Shield – Covers the internal curvature of U-bend tubes, providing targeted protection from flue gas erosion, thermal scaling, and corrosion. Ladhani Metal Corporation is a leading manufacturer, supplier, and exporter of Cr23Ni13 U Type Inner Half Round Tube Shields, offering precision-engineered solutions for high-performance thermal and chemical systems. Chemical Composition of Cr23Ni13 – Austenitic Heat-Resistant Steel • Carbon (C): ≤ 0.12% • Manganese (Mn): ≤ 1.50% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.50% • Chromium (Cr): 22.0 – 24.0% • Nickel (Ni): 12.0 – 14.0% • Iron (Fe): Balance Applications: Suitable for continuous exposure to high temperatures in oxidizing and chemically aggressive environments. Ideal for inner bend protection in return coil systems subjected to high thermal load and corrosive gas flow. Uses • Protects inner arcs of U-bend tubes in thermal power plant superheaters, reheaters, and economizers • Installed in WHRBs and HRSGs to resist scale and slag in return bends exposed to flue gas turbulence • Applied in steam reformers, process furnaces, and heat exchangers where inner tube surfaces face corrosive and hot gas impact • Used in chemical reactors and cracking units operating under cyclic thermal and chemical stress • Suitable for long-term protection of curved tubes in industrial combustion and heating equipment Features • High-temperature oxidation resistance – Performs in continuous service above 1000°C • Inner arc shielding – Targets protection for the most erosion-prone and heat-stressed tube area • Corrosion resistance – Withstands exposure to sulfur-rich gases, acidic vapors, and flue gas byproducts • Fabricated to specification – Available in custom sizes and bend radii for a precise fit and stable coverage • Simple installation – Can be secured using clamping, banding, or welding without disrupting the system • Extended service life – Reduces risk of tube failure, minimizes maintenance downtime, and improves system efficiency Applications • thermal and power generation – Protects inner U-bend surfaces from corrosion and erosion in steam circuits • petrochemical processing – Shields return bends in reformers and exchangers from hot process gases • waste heat recovery – Used in curved tubes of WHRBs and HRSGs for inner arc scale protection • chemical industry – Applied in reactors and thermal systems subjected to chemical vapors and high heat • furnace and incineration systems – Effective in resisting slag and gas-induced wear in industrial burners Conclusion The Cr23Ni13 U Type Inner Half Round Tube Shield by Ladhani Metal Corporation – manufacturer, supplier, and exporter – offers dependable inner arc protection for U-bend tubes operating in aggressive thermal and chemical environments. Its high-temperature and corrosion-resistant properties make it ideal for safeguarding critical process tubes across a range of high-performance industrial systems. For technical consultation, customized fabrication, or quotations, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are essential components used to protect heat exchanger tubes, boiler coils, and superheater assemblies from erosion, scaling, slag buildup, and high-temperature corrosion. Designed with a semi-cylindrical profile, they offer easy installation over straight or curved tube surfaces. These shields play a vital role in increasing service life, reducing tube maintenance, and ensuring the efficient operation of thermal systems across power generation, chemical processing, and petrochemical industries. 1Cr25Ni20Si2 U Type Inner Half Round Tube Shield The 1Cr25Ni20Si2 U Type Inner Half Round Tube Shield is fabricated from a high-temperature resistant chromium-nickel-silicon alloy steel. This grade offers excellent resistance to oxidation, sulfur corrosion, and thermal fatigue, even under prolonged exposure to temperatures above 1000°C. The inner U-type configuration is specifically designed to shield the internal curvature of U-bend tubes, a zone vulnerable to accelerated wear caused by flue gas turbulence, slag impact, and thermal cycling. • Inner U Type Half Round Tube Shield – Designed to cover the inside arc of U-bend tubes, offering protection from erosion, scale formation, and heat stress. Ladhani Metal Corporation is a reliable manufacturer, supplier, and exporter of 1Cr25Ni20Si2 U Type Inner Half Round Tube Shields, providing high-performance protective solutions for extreme temperature and chemically aggressive environments. Chemical Composition of 1Cr25Ni20Si2 – High Temperature Alloy Steel • Carbon (C): ≤ 0.20% • Manganese (Mn): ≤ 1.50% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.030% • Silicon (Si): 1.80 – 2.50% • Chromium (Cr): 24.0 – 26.0% • Nickel (Ni): 19.0 – 22.0% • Iron (Fe): Balance Applications: Suited for high-temperature environments with oxidizing, sulfurizing, or carburizing gases. Especially effective in boiler, furnace, and WHRB systems operating under cyclic thermal conditions. Uses • Installed on the inner arc of U-bend tubes in power plant boilers and superheaters exposed to slag and thermal stress • Protects curved tube bends in WHRBs, HRSGs, and reformers subjected to flue gas erosion and oxidation • Applied in heat exchangers and reactors operating in high-temperature and chemically active atmospheres • Used in furnace coils, metallurgical plants, and incinerators for protection from sulfur-laden and high-heat gas streams • Suitable for curved tube coils in petrochemical and process industries where scaling and corrosion are common Features • Excellent oxidation resistance – Performs effectively at continuous service temperatures up to 1100°C • Superior inner arc protection – Covers high-wear zones exposed to heat, slag, and turbulent gas flow • Enhanced thermal fatigue resistance – Designed for use in cyclic heating environments without distortion • Corrosion resistance – Withstands acid gases and sulfur-rich flue gases common in industrial combustion systems • Precision fitment – Fabricated to match specific tube sizes and bend radii for optimal protection and stability • Easy installation – Can be fixed using clamping, tack welding, or banding methods depending on system design Applications • power generation – Shields inner U-bend tubes in superheaters and reheaters from high-temperature erosion • waste heat recovery – Used in WHRBs and HRSGs to protect internal arcs against scaling and oxidation • petrochemical processing – Protects U-bend tubes in reformers and exchangers exposed to acidic gas streams • chemical industry – Ensures long-lasting performance in reactors and thermal processing equipment • metallurgical and furnace systems – Applied where high heat and slag exposure are routine Conclusion The 1Cr25Ni20Si2 U Type Inner Half Round Tube Shield by Ladhani Metal Corporation – manufacturer, supplier, and exporter – provides high-strength, heat-resistant shielding for the internal arcs of U-bend tubes operating in severe industrial environments. Its resistance to oxidation, corrosion, and thermal fatigue makes it a dependable solution for extending equipment life and performance under extreme conditions. For custom sizes, technical support, or pricing inquiries, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are high-performance protective components engineered to safeguard boiler tubes, heat exchanger coils, and superheaters from erosion, thermal fatigue, scaling, and corrosion. Widely used in thermal power plants, petrochemical units, and process heating systems, these shields offer reliable surface protection in extreme environments. Their half-round design allows quick installation over both curved and straight tube sections, extending tube life and minimizing maintenance requirements. Cr25Ni20 U Type Inner Half Round Tube Shield The Cr25Ni20 U Type Inner Half Round Tube Shield is made from a high-alloy chromium-nickel austenitic stainless steel that offers outstanding resistance to oxidation, carburization, and high-temperature corrosion. This alloy is well suited for environments involving thermal cycling and chemically aggressive gases. The inner U-type configuration is specifically designed to protect the inside curvature of U-bend tubes—where gas turbulence, thermal stress, and slag accumulation can lead to premature wear and damage. • Inner U Type Half Round Tube Shield – Designed to guard the inner arc of U-bend tubes against erosion, scaling, and oxidation under high thermal loads and gas flow impact. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of Cr25Ni20 U Type Inner Half Round Tube Shields, delivering precision-engineered solutions for demanding heat and corrosion environments. Chemical Composition of Cr25Ni20 – High Chromium-Nickel Austenitic Alloy • Carbon (C): ≤ 0.20% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.040% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.50% • Chromium (Cr): 24.0 – 26.0% • Nickel (Ni): 19.0 – 22.0% • Iron (Fe): Balance Applications: Ideal for high-temperature applications involving oxidizing, carburizing, or sulfidizing gases, where mechanical and chemical durability is critical. Uses • Shields inner arcs of U-bend tubes in boilers and superheaters exposed to oxidizing combustion gases • Protects return bends in waste heat recovery boilers (WHRBs) and heat recovery steam generators (HRSGs) • Applied in curved tubes in reformers, incinerators, and heat exchangers operating above 900°C • Used in chemical and petrochemical systems with chloride- or sulfur-laden atmospheres • Suitable for tube protection in high-temperature furnaces and metallurgical processes Features • Excellent high-temperature oxidation resistance – Performs reliably at sustained service temperatures up to 1150°C • Inner arc protection – Focused shielding of the bend area most affected by thermal cycling and gas turbulence • Corrosion and scaling resistance – Maintains integrity in aggressive chemical and flue gas environments • Precision engineering – Custom-manufactured to match specific tube diameter and bend geometry • Easy to install – Compatible with clamp-on, tack welding, or stainless steel banding • Durable and long-lasting – Reduces frequency of tube failures and downtime in critical systems Applications • power generation – Used in superheater U-bends where inner arcs are exposed to extreme thermal loads • petrochemical and fertilizer plants – Shields inner return bends in steam reformers and reactors • waste heat recovery – Installed in WHRBs and HRSGs to prevent scaling and oxidation on inner bend surfaces • chemical process industry – Protects U-bend tubes from acid vapors, hot gases, and corrosion • metallurgical industry – Ideal for inner arc protection in high-temperature treatment furnaces Conclusion The Cr25Ni20 U Type Inner Half Round Tube Shield by Ladhani Metal Corporation – manufacturer, supplier, and exporter – offers robust protection for U-bend tubes operating in high-temperature and corrosive environments. Its exceptional resistance to oxidation and thermal damage makes it ideal for critical industrial systems requiring long-lasting performance and reliability. For detailed specifications, custom fabrication, or quotations, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are precisely engineered components used to safeguard boiler tubes, superheaters, and heat exchanger coils from erosion, scaling, thermal stress, and high-temperature corrosion. Their half-round construction enables quick and secure installation over straight or curved tube surfaces, offering long-term protection and minimizing maintenance in industrial heating systems, power plants, and petrochemical facilities. 1Cr18Ni9Ti U Type Inner Half Round Tube Shield The 1Cr18Ni9Ti U Type Inner Half Round Tube Shield is manufactured from a titanium-stabilized austenitic stainless steel grade, offering superior resistance to intergranular corrosion and oxidation at elevated temperatures. This grade is particularly effective in welded applications and thermal systems subjected to cycling and corrosive media. The inner U-type configuration is designed to shield the inside curvature of U-bend tubes, where turbulent gas flow, slag, and thermal concentration often cause accelerated wear and scaling. • Inner U Type Half Round Tube Shield – Designed to protect the internal arc of U-bend tubes from high-temperature scaling, slag impact, and turbulent gas erosion. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of 1Cr18Ni9Ti U Type Inner Half Round Tube Shields, offering durable, high-performance shielding solutions for critical thermal systems. Chemical Composition of 1Cr18Ni9Ti – Titanium-Stabilized Austenitic Stainless Steel • Carbon (C): ≤ 0.12% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 17.0 – 19.0% • Nickel (Ni): 8.0 – 11.0% • Titanium (Ti): Stabilized as required • Iron (Fe): Balance Applications: Ideal for welded and high-temperature systems exposed to oxidation, intergranular corrosion, and chloride-bearing flue gases. Uses • Protects inner arcs of U-bend tubes in superheaters and reheaters of thermal power plants • Installed in return bends of waste heat recovery boilers (WHRBs) and HRSGs facing slag and scale accumulation • Applied in curved tube sections in chemical reactors and heat exchangers exposed to acidic or oxidizing gases • Suitable for marine and coastal heating systems where chlorides and moisture are present • Used in food processing, metallurgical furnaces, and process plants requiring stable, high-temperature performance Features • Excellent intergranular corrosion resistance – Stabilized with titanium to prevent carbide precipitation • Inner arc protection – Shields high-stress areas from gas turbulence and heat-induced damage • High-temperature performance – Reliable up to 870°C in oxidizing environments • Custom fit – Fabricated to match specific tube diameters and bend radii for precise installation • Easy to install – Suitable for clamp-on, weld-on, or banding methods • Long service life – Reduces frequency of tube replacement and supports consistent thermal performance Applications • thermal power generation – Inner arc protection in U-bend tubes exposed to combustion gases and temperature fluctuations • petrochemical and fertilizer plants – Shields tube bends in reactors and reformers exposed to acidic gases • waste heat recovery – Guards inner surfaces of tube coils in WHRBs and HRSGs from scaling and corrosion • marine heat exchangers – Suitable for use in systems exposed to saltwater vapors and high humidity • industrial furnaces and incinerators – Provides internal bend protection under severe thermal cycling Conclusion The 1Cr18Ni9Ti U Type Inner Half Round Tube Shield by Ladhani Metal Corporation – manufacturer, supplier, and exporter – delivers robust and reliable protection for U-bend tubes operating in corrosive and high-temperature environments. With titanium stabilization and a custom-engineered fit, this shield ensures extended tube life, reduced wear, and optimized performance in industrial heating systems. For technical assistance, custom specifications, or quotations, please contact Ladhani Metal Corporation.

DIN 2628 Inconel flanges PN 250 are high-strength weld neck flanges manufactured in accordance with the DIN 2628 standard. Designed to operate in high-pressure systems up to 250 bar (3625 psi), these flanges offer outstanding performance in extreme environments involving high temperatures, corrosive chemicals, and mechanical stress. Made from Inconel superalloys, they provide excellent resistance to oxidation, thermal fatigue, and pitting, making them ideal for critical applications in demanding industries. Ladhani Metal Corporation is a globally trusted manufacturer and exporter of premium Inconel flanges. Our DIN 2628 PN 250 Inconel weld neck flanges are widely used in sectors such as chemical processing, offshore drilling, aerospace, power generation, and marine engineering. Known for precision engineering, reliability, and resistance to harsh service conditions, these flanges are a preferred choice in pressure-intensive and corrosion-prone systems. Pressure Rating: • PN 250 (250 bar / 3625 psi): Suitable for high-pressure pipelines requiring superior sealing, thermal resistance, and structural integrity. Flange Type: • Weld Neck Flanges Designed with a tapered hub to reduce stress concentration at the weld point. Ideal for high-pressure and high-temperature environments. • Flat Face (FF) Flanges Flat face design ensures even gasket compression, preventing flange warping and providing secure sealing, especially when used with cast or brittle materials. Inconel Grades and Composition: Inconel 600 (UNS N06600) • Nickel (Ni): ≥ 72.0% • Chromium (Cr): 14.0 – 17.0% • Iron (Fe): 6.0 – 10.0% • Carbon (C): ≤ 0.15% • Manganese (Mn): ≤ 1.0% • Silicon (Si): ≤ 0.5% Applications: Excellent resistance to heat and corrosion by acids and chlorides. Commonly used in heat exchangers, reactors, and high-temperature furnace parts. Inconel 625 (UNS N06625) • Nickel (Ni): ≥ 58.0% • Chromium (Cr): 20.0 – 23.0% • Molybdenum (Mo): 8.0 – 10.0% • Niobium (Nb) + Tantalum (Ta): 3.15 – 4.15% • Iron (Fe): ≤ 5.0% • Carbon (C): ≤ 0.10% • Manganese (Mn): ≤ 0.50% • Silicon (Si): ≤ 0.50% Applications: Exceptional corrosion resistance in chloride-bearing environments. Ideal for offshore oil and gas, marine exhaust systems, and chemical plants. Inconel 718 (UNS N07718) • Nickel (Ni): 50.0 – 55.0% • Chromium (Cr): 17.0 – 21.0% • Iron (Fe): Balance • Niobium (Nb) + Tantalum (Ta): 4.75 – 5.50% • Molybdenum (Mo): 2.80 – 3.30% • Titanium (Ti): 0.65 – 1.15% • Aluminum (Al): 0.20 – 0.80% • Carbon (C): ≤ 0.08% Applications: A precipitation-hardened superalloy with outstanding strength, creep resistance, and corrosion resistance at temperatures up to 700°C. Widely used in aerospace turbine engines, nuclear reactors, and high-pressure chemical systems. Applications of DIN 2628 Inconel Flanges PN 250: • Chemical and Petrochemical Plants Ideal for piping systems exposed to aggressive chemicals, high pressures, and temperature fluctuations. • Power Generation Used in nuclear, thermal, and gas-fired power plants where heat and pressure resistance are critical. • Aerospace and Jet Engine Systems 718-grade flanges are suitable for turbine casings, fuel lines, and other high-temperature aircraft components. • Marine and Offshore Engineering Highly corrosion-resistant in saltwater environments, suitable for subsea manifolds, pipelines, and ballast systems. • Heat Treatment and Thermal Processing Used in furnaces, reactors, and pressure vessels subjected to rapid thermal cycling and oxidation. Key Features: • Manufactured according to DIN 2628 standards • PN 250 pressure rating for high-pressure system integrity • Weld neck design ensures optimal strength and flow performance • Available in Inconel 600, 625, and 718 grades • Flat face option for uniform sealing and safety in brittle systems • Excellent resistance to high temperatures, oxidation, and chlorides • Suitable for extreme chemical, thermal, and marine environments • Custom sizes, pressure classes, and finishes available upon request Conclusion: DIN 2628 Inconel Flanges PN 250 from Ladhani Metal Corporation offer the ideal solution for industries demanding high-performance materials under extreme conditions. With options in Inconel 600, 625, and 718, these weld neck flanges combine corrosion resistance, strength, and thermal stability for reliable operation across a wide range of high-pressure applications. Contact Ladhani Metal Corporation for detailed specifications, technical assistance, or to request a tailored quotation.

DIN 2627 Carbon Steel flanges PN 400 are high-strength blind flanges designed for use in high-pressure applications across a wide range of industrial systems. Manufactured in accordance with the DIN 2627 standard, these flanges are primarily used to isolate piping systems by sealing off the end of a pipeline or vessel opening. The PN 400 pressure rating (400 bar / 5800 psi) ensures reliable performance under intense pressure and mechanical stress. Carbon steel flanges offer excellent tensile strength, impact resistance, and structural integrity, making them a cost-effective solution for systems where corrosion resistance is not the primary concern. Typically used in applications involving water, steam, oil, and gas, DIN 2627 carbon steel blind flanges are well-suited for power plants, refineries, petrochemical facilities, and general industrial systems. Ladhani Metal Corporation is a trusted global manufacturer and exporter of carbon steel flanges, producing components that meet rigorous international standards for material quality, dimensional accuracy, and pressure containment. Pressure Rating: • PN 400 (400 bar / 5800 psi): Suitable for extremely high-pressure systems in industrial pipelines and mechanical installations. Flange Type: • Blind Flanges Solid, non-bored flanges used to terminate flow or provide system isolation. Commonly used for pressure testing, maintenance access, and future expansion. • Flat Face (FF) Flanges Flat sealing surfaces designed for use with full-face gaskets and flat-faced mating flanges. Promotes even bolt loading and effective sealing under high-pressure conditions. Carbon Steel Grades and Composition: ASTM A105 (Forged Carbon Steel) • Carbon (C): ≤ 0.35% • Manganese (Mn): 0.60 – 1.05% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.040% • Silicon (Si): 0.10 – 0.35% Applications: Commonly used for high-temperature and high-pressure systems. Ideal for oil and gas, steam, and hydraulic systems. ASTM A350 LF2 (Low-Temperature Carbon Steel) • Carbon (C): ≤ 0.30% • Manganese (Mn): 0.60 – 1.35% • Silicon (Si): 0.15 – 0.30% • Nickel (Ni): ≤ 1.0% Applications: Suitable for sub-zero temperature services such as cryogenic systems, LNG processing, and cold-weather pipelines. Applications of DIN 2627 Carbon Steel Flanges PN 400: • Oil and Gas Transmission Lines Used in pipeline systems and refineries handling hydrocarbons under high pressure. • Steam and Power Generation Plants Ideal for high-pressure steam lines, condensate systems, and boiler feedwater applications. • Petrochemical and Chemical Industries Suitable for handling neutral and non-aggressive chemical fluids and process gases. • Water Treatment and Pumping Stations Used in high-pressure water systems, including pumping stations, pressure regulators, and testing units. • Heating, Ventilation, and Air Conditioning (HVAC) Employed in high-pressure chilled water and steam systems for industrial facilities. • General Manufacturing and Engineering Systems Reliable for structural piping systems in factories and mechanical installations. Key Features: • Compliant with DIN 2627 specifications • PN 400 pressure rating for ultra-high-pressure systems • Blind flange design allows for system isolation and pressure containment • Flat face design compatible with full-face gaskets and flat mating surfaces • Manufactured from forged carbon steels like ASTM A105 and A350 LF2 • Excellent strength, ductility, and impact resistance • Economical and durable for non-corrosive environments • Widely used across oil and gas, power, chemical, and water treatment sectors • Custom sizes, pressure classes, surface coatings, and face types available upon request Conclusion: DIN 2627 Carbon Steel Flanges PN 400 from Ladhani Metal Corporation are engineered for high-performance applications requiring strength, pressure retention, and reliability in demanding industrial environments. Whether used in power plants, oil pipelines, or steam systems, these flanges provide durable and cost-effective sealing for critical operations. Contact Ladhani Metal Corporation for product specifications, technical support, or custom solutions tailored to your piping system requirements.

DIN 2627 Inconel flanges PN 400 are premium-grade blind flanges engineered for ultra-high-pressure applications requiring exceptional corrosion resistance, heat resistance, and mechanical strength. Manufactured in accordance with the DIN 2627 standard, these flanges are designed to seal off the ends of piping systems, especially in extreme environments involving high temperatures, aggressive chemicals, or seawater exposure. The PN 400 rating (400 bar / 5800 psi) ensures performance under intense pressure conditions. Produced using high-performance nickel-based alloys such as Inconel 600, Inconel 625, and Inconel 718, these flanges are used extensively in aerospace, chemical processing, offshore oil and gas, marine, and power generation industries. Ladhani Metal Corporation is a leading global manufacturer and exporter of Inconel flanges, supplying components that conform to international standards for material integrity, pressure containment, and corrosion resistance. Pressure Rating: • PN 400 (400 bar / 5800 psi): Suitable for high-pressure piping systems in critical applications where maximum sealing and durability are essential. Flange Type: • Blind Flanges Solid, non-bored flanges used to isolate piping systems or terminate flow. Ideal for pressure testing, maintenance, and future pipeline expansions. • Flat Face (FF) Flanges Designed with a flat sealing surface for use with full-face gaskets and flat mating components, ensuring even load distribution and effective sealing. Inconel Grades and Composition: Inconel 600 (UNS N06600) • Nickel (Ni): ≥ 72% • Chromium (Cr): 14 – 17% • Iron (Fe): 6 – 10% • Manganese (Mn): ≤ 1% • Silicon (Si): ≤ 0.5% • Carbon (C): ≤ 0.15% • Sulfur (S): ≤ 0.015% Applications: Excellent resistance to oxidation, carburization, and chloride-ion stress corrosion cracking. Used in furnace components, heat exchangers, and food processing equipment. Inconel 625 (UNS N06625) • Nickel (Ni): ≥ 58% • Chromium (Cr): 20 – 23% • Molybdenum (Mo): 8 – 10% • Niobium + Tantalum (Nb + Ta): 3.15 – 4.15% • Iron (Fe): ≤ 5% • Carbon (C): ≤ 0.10% • Manganese (Mn): ≤ 0.5% • Silicon (Si): ≤ 0.5% Applications: Outstanding corrosion and fatigue resistance in seawater and chemical environments. Common in marine, aerospace, and offshore industries. Inconel 718 (UNS N07718) • Nickel (Ni): 50 – 55% • Chromium (Cr): 17 – 21% • Iron (Fe): Balance • Niobium + Tantalum (Nb + Ta): 4.75 – 5.5% • Molybdenum (Mo): 2.8 – 3.3% • Titanium (Ti): 0.65 – 1.15% • Aluminum (Al): 0.2 – 0.8% Applications: High strength and oxidation resistance up to 700°C. Used in jet engines, gas turbines, and high-pressure valves. Applications of DIN 2627 Inconel Flanges PN 400: • Offshore Oil and Gas Platforms Withstands high-pressure, high-salinity, and corrosive environments in subsea pipelines and risers. • Chemical Processing Plants Ideal for systems handling oxidizers, acids, solvents, and reactive compounds at high temperatures and pressures. • Aerospace and Jet Propulsion Used in fuel systems, hydraulic lines, and turbine enclosures where extreme heat and stress are common. • Nuclear and Power Generation Suited for high-pressure reactor lines and heat exchanger systems exposed to radiation, heat, and corrosive media. • Desalination and Seawater Systems Highly resistant to chloride-induced pitting and crevice corrosion. • High-Temperature and Reactive Media Systems Perfect for isolating systems exposed to thermal cycling and chemical attack. Key Features: • Manufactured to DIN 2627 standards • Rated for PN 400 ultra-high-pressure systems • Blind flange design for sealing pipe ends or testing access • Flat face design for even gasket compression and sealing • Available in Inconel 600, 625, and 718 • Excellent resistance to oxidation, acids, chlorides, and high heat • High mechanical strength and fatigue resistance • Used in critical industries including aerospace, marine, oil and gas, and chemical processing • Custom sizes, alloys, pressure ratings, and surface finishes available on request Conclusion: DIN 2627 Inconel Flanges PN 400 from Ladhani Metal Corporation offer exceptional performance and reliability in the most demanding service conditions. Whether your system involves corrosive chemicals, high-pressure steam, or marine exposure, these blind flanges deliver secure sealing, longevity, and safety. Contact Ladhani Metal Corporation for material selection, technical support, or custom solutions tailored to your high-performance application.