Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are precision-engineered components used to protect heat exchanger and boiler tubes from erosion, scaling, slag buildup, and high-temperature oxidation. These shields are commonly applied in thermal and industrial systems where tubes are exposed to flue gases, particulate flow, and repeated thermal cycling. The half-round design ensures secure and efficient coverage over straight or curved tube sections, reducing maintenance needs and enhancing tube lifespan. SS 430 U Type Outer Half Round Tube Shield The SS 430 U Type Outer Half Round Tube Shield is fabricated from SS 430, a ferritic stainless steel known for its good corrosion resistance, oxidation resistance, and excellent formability. This outer U-type shield is specifically designed to protect the outer arc of U-bend tubes in boilers, heat exchangers, and recovery systems. SS 430 is highly resistant to stress corrosion cracking and scaling in mildly corrosive and high-temperature environments, making it a cost-effective solution for less aggressive service conditions. • Outer U Type Half Round Tube Shield – Shields the outer curvature of U-bend tubes against heat, slag, soot erosion, and surface oxidation from flue gases. Ladhani Metal Corporation is a reliable manufacturer, supplier, and exporter of SS 430 U Type Outer Half Round Tube Shields, offering dependable protection for boiler and exchanger tube bends in moderate-temperature industrial environments. Chemical Composition of SS 430 – Ferritic Stainless Steel • Carbon (C): ≤ 0.12% • Manganese (Mn): ≤ 1.00% • Phosphorus (P): ≤ 0.040% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 16.0 – 18.0% • Nickel (Ni): ≤ 0.75% • Iron (Fe): Balance Applications: Ideal for moderate-temperature, mildly corrosive environments where oxidation resistance and mechanical durability are required. Uses • Outer bend protection of U-tubes in reheaters and superheaters in thermal power generation systems • Shielding of external arcs in waste heat recovery units and heat exchangers exposed to dry or clean flue gases • Coverage of U-bend tubes in utility boilers and economizers with low chloride or sulfuric gas exposure • Suitable for food processing and clean air systems requiring stable performance under elevated temperatures • Used in systems where stress corrosion cracking resistance and cost-effective shielding are priorities Features • Good corrosion and oxidation resistance – Chromium-rich alloy resists surface oxidation and rust formation at elevated temperatures • Outer arc coverage – Provides mechanical and thermal shielding for the most exposed curve of U-bend tubes • Thermal stability – Performs reliably in temperatures up to 815°C with good resistance to scaling and heat stress • Easy installation – Can be mounted using clamps, banding, or tack welding without requiring disassembly of the system • Precision fit – Custom-fabricated to fit specific tube diameters and radii, ensuring secure, movement-free installation • Economical solution – Offers dependable performance at a lower cost compared to austenitic stainless steels Applications • thermal and captive power plants – Installed on U-bend outer arcs in superheaters and economizers exposed to moderate flue gases • heat recovery systems – Shields bends in WHRB and HRSG systems operating under low-corrosive and oxidizing conditions • general industrial boilers – Protects tube surfaces from surface scaling and minor gas abrasion • process industries – Suitable for clean air and low-chloride gas systems in the food, paper, or light chemical sectors • HVAC and ventilation systems – Used in exhaust and heating systems requiring corrosion-resistant but cost-effective shielding Conclusion The SS 430 U Type Outer Half Round Tube Shield by Ladhani Metal Corporation—manufacturer, supplier, and exporter—is a cost-effective and reliable protective component for U-bend tube outer surfaces in industrial systems. With good oxidation resistance, structural integrity under moderate heat, and easy installation, it is ideal for power plants, recovery systems, and clean process industries where durable but economical shielding is required. For technical consultation, custom orders, or quotations, please contact Ladhani Metal Corporation

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are specially designed components used to protect boiler and heat exchanger tubes from erosion, wear, and high-temperature damage. Manufactured with precision and expertise, these shields ensure enhanced tube life, reduced maintenance, and efficient operation in demanding industrial environments. SS 304L Half Round Tube Shield The SS 304L Half Round Tube Shield is a semi-circular protective cover made from high-quality stainless steel grade 304L. It is widely used in thermal and mechanical systems where tube surfaces are exposed to harsh operating conditions. The lower carbon content in SS 304L offers enhanced weldability and minimizes the risk of carbide precipitation, making it ideal for high-temperature and corrosive environments. The half-round design allows for easy installation over tubes while ensuring robust protection from flue gases, abrasives, and thermal stress. Manufactured using stainless steel grade 304L, these half-round tube shields are semi-cylindrical covers that are clamped or welded over exposed tubes. The “L” in SS 304L denotes “Low Carbon,” which offers improved resistance to sensitization during welding or prolonged exposure to elevated temperatures, making it more suitable for high-temperature and corrosive conditions compared to standard SS 304. The shields are formed with precision to ensure a snug fit over tubes and provide maximum protection without disrupting heat transfer or fluid flow. Chemical Composition of SS 304L – Austenitic Stainless Steel • Carbon (C): ≤ 0.030% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 18.0 – 20.0% • Nickel (Ni): 8.0 – 12.0% • Iron (Fe): Balance Applications: Widely used in boilers, heat exchangers, steam lines, and furnaces due to its excellent corrosion resistance, weldability, and performance in high-temperature service conditions. Uses – SS 304L Half Round Tube Shield • Boiler Tube Protection – Used to safeguard boiler tubes from high-temperature flue gases, ash erosion, and abrasive particles, ensuring extended service life and reduced downtime. • Heat Exchanger Tube Shielding – Protects heat exchanger tubes from corrosive process fluids and turbulent flow, helping to maintain performance and reduce maintenance frequency. • Furnace Gas Flow Wear Prevention – Installed in furnace environments where high-velocity gases and thermal cycling can cause severe tube wear, acting as a durable barrier. • Petrochemical & Refinery Applications – Shields critical tubing in high-temperature and chemically aggressive environments, improving resistance to oxidation and corrosion. Applications – SS 304L Half Round Tube Shield • Thermal Power Stations – Ideal for boiler systems and superheater tubes exposed to extreme thermal and flow conditions. • Refineries & Petrochemical Plants – Used in cracking units, reformers, and reactors where temperature and corrosion challenges are common. • Heat Recovery Steam Generators (HRSGs) – Enhances protection of tubes in combined cycle power plants and improves system reliability. • Chemical Processing Units – Prevents corrosion and surface degradation in harsh chemical flow environments. • Pulp and Paper Industry – Protects process tubes in digesters, recovery boilers, and steam-generating systems. • Industrial Boilers and Steam Systems – Ensures long-lasting tube integrity in high-pressure and high-temperature steam applications. Benefits • Extended Tube Life: Reduces repair frequency and tube replacement cycles. • Cost Efficiency: Minimizes downtime and maintenance-related expenses. • Reliable Performance: Maintains mechanical integrity under fluctuating temperatures and pressure conditions. • Sustainability: Enhances energy efficiency by maintaining consistent heat transfer performance. Conclusion The SS 304L Half Round Tube Shield by Ladhani Metal Corporation is an ideal solution for protecting critical tube systems in aggressive and high-temperature environments. Designed for high performance and long-lasting reliability, these shields help extend the lifespan of tubing systems while reducing downtime and maintenance costs. With customizable options, premium materials, and expert fabrication, Ladhani Metal Corporation is your trusted partner in tube protection solutions. For more details, inquiries, or to request a quote, please contact Ladhani Metal Corporation.

DIN 2573 Monel Flanges PN 6 are premium-quality, low-pressure plate flanges crafted from Monel alloys, specifically engineered for systems that operate in highly corrosive and aggressive environments. Manufactured in accordance with DIN 2573 standards, these flanges offer excellent resistance to seawater, acids, and high-temperature conditions, making them an ideal choice for industries such as marine engineering, chemical processing, oil and gas, and power generation. The exceptional properties of Monel alloys ensure durability and reliability in applications requiring strong resistance to pitting, crevice corrosion, and stress corrosion cracking. Ladhani Metal Corporation is a trusted manufacturer and global supplier of Monel alloy flanges, delivering high-quality products that meet rigorous international standards. The DIN 2573 flange design ensures easy installation and provides a secure, leak-free connection, even in low-pressure, harsh environments. Pressure Rating: • PN 6 (6 bar / 87 psi): Designed for low-pressure applications in corrosive and high-temperature environments where Monel’s strength and resistance to corrosion are critical for long-term performance. Flange Types: • Plate Flanges Flat flanges ideal for bolted connections in piping systems where gasket sealing is required, providing secure, leak-free operation in low-pressure systems. • Flat Face (FF) Flanges Used with flat gaskets and mating surfaces, ensuring uniform contact and load distribution, particularly when joining with non-metallic components or cast iron systems. • Slip-On Flanges These flanges slip over the pipe, providing easy alignment and easy-to-weld connections, ideal for low-pressure applications with moderate pressure fluctuations. • Custom-Machined Flanges Tailored to meet specific dimensional and material requirements, available in various sizes, grades, and face finishes to suit the needs of custom applications. Monel Grades and Composition: Monel 400 (UNS N04400) Composition: • Nickel (Ni): 63.0 – 70.0% • Copper (Cu): 28.0 – 34.0% • Iron (Fe): ≤ 2.5% • Manganese (Mn), Silicon (Si), Carbon (C): Trace amounts Applications: Monel 400 is widely used in marine environments, chemical processing, and heat exchangers, where it is subjected to both high temperatures and exposure to saltwater or acids. Its superior resistance to corrosion and oxidation makes it a preferred material in demanding applications like pumps, valves, and marine piping systems. Monel K-500 (UNS N05500) Composition: • Nickel (Ni): 63.0 – 70.0% • Copper (Cu): 27.0 – 33.0% • Aluminum (Al): 2.3 – 3.2% • Titanium (Ti): 0.35 – 0.85% • Iron (Fe): ≤ 2.5% Applications: Monel K-500 offers higher strength and hardness compared to Monel 400, making it suitable for applications in oil and gas extraction, marine industries, and aerospace systems, where both corrosion resistance and high mechanical properties are required. Applications of DIN 2573 Monel Flanges: • Chemical and Petrochemical Plants: Monel flanges are ideal for use in chemical reactors, exchangers, and pipelines handling aggressive chemicals like sulfuric acid, hydrochloric acid, and caustics. • Marine and Offshore Engineering: Highly resistant to seawater corrosion, Monel flanges are used extensively in marine piping systems, offshore oil rigs, and shipbuilding applications where exposure to saltwater and harsh weather conditions is frequent. • Oil and Gas Industry: Monel flanges are often used in production platforms, refineries, and pipelines exposed to brine and acidic substances, offering both strength and resistance to corrosion under high-stress conditions. • Power Generation: Used in systems handling high-temperature steam and corrosive environments, Monel flanges provide reliable service for high-performance power plant components. • Desalination and Water Treatment: With their corrosion resistance to saline environments, Monel flanges are also ideal for seawater desalination plants and water treatment facilities. Key Features: • Manufactured according to DIN 2573 standards • Rated for PN 6 low-pressure systems, with exceptional resistance to corrosion • Outstanding performance in highly corrosive, high-temperature environments • Available in Monel 400, Monel K-500, and other Monel alloys • High strength-to-weight ratio for reliable long-term performance • Suitable for marine, offshore, chemical, and power generation applications • Available with custom drilling, surface finishes, and flange faces Conclusion: DIN 2573 Monel Flanges PN 6 from Ladhani Metal Corporation provide unmatched durability, corrosion resistance, and performance in low-pressure applications exposed to challenging chemical, thermal, and environmental conditions. For custom dimensions, material selections, or technical support, contact Ladhani Metal Corporation today.

DIN 2569 Monel Flanges PN 100 are precision-engineered welding neck flanges manufactured from high-grade Monel alloys, specifically designed for high-pressure and highly corrosive environments. Built to DIN 2569 standards, these flanges offer excellent resistance to seawater, acids, and alkalis, along with superior mechanical strength and durability. Their robust performance makes them ideal for critical applications in marine engineering, chemical processing, oil and gas, and offshore industries. Ladhani Metal Corporation is a leading manufacturer and exporter of Monel flanges, offering reliable and high-quality products that meet stringent international standards. The welding neck configuration ensures permanent, high-strength connections suitable for continuous operation under high pressure and temperature conditions. Pressure Rating: • PN 100 (100 bar / 1450 psi): Specifically designed for high-pressure systems requiring outstanding corrosion resistance, sealing integrity, and mechanical performance in aggressive and demanding environments. Flange Types: • Welding Neck Flanges Provide high-strength welded connections for pressurized piping systems exposed to thermal expansion and vibration. • Raised Face (RF) Flanges Enhance gasket compression and sealing performance in high-pressure and temperature applications. • Flat Face (FF) Flanges Used in applications with flat mating surfaces, particularly when connecting to brittle or non-metallic materials. • Forged Welding Neck Flanges Offer high mechanical strength, dimensional accuracy, and durability. • Custom-Machined Flanges Available in various sizes, pressure classes, and Monel grades as per customer requirements. Monel Grades and Composition: 1. Monel 400 (Nickel-Copper Alloy) Composition: • Nickel (Ni): ≥ 63.0% • Copper (Cu): 28.0 – 34.0% • Iron (Fe): ≤ 2.5% • Manganese (Mn): ≤ 2.0% • Silicon (Si): ≤ 0.5% • Carbon (C): ≤ 0.30% Applications: Used in marine engineering, chemical processing, and fuel or freshwater tanks due to its excellent resistance to seawater, hydrofluoric acid, and stress corrosion cracking. 2. Monel K500 (Precipitation-Hardened Alloy) Composition: • Nickel (Ni): ≥ 63.0% • Copper (Cu): 27.0 – 33.0% • Aluminum (Al): 2.3 – 3.15% • Titanium (Ti): 0.35 – 0.85% Applications: Ideal for applications requiring high strength and corrosion resistance, such as pump shafts, oil well tools, and marine components. K500 offers greater mechanical strength and hardness compared to Monel 400. Applications of DIN 2569 Monel Flanges: • Marine and Offshore Engineering: Perfect for underwater, saltwater, and coastal applications due to excellent seawater and corrosion resistance. • Chemical and Petrochemical Industries: Used in acid and alkali handling systems, heat exchangers, and reactors where corrosion resistance is crucial. • Oil and Gas Sector: Employed in valves, pipes, and flanges exposed to sour gas and offshore drilling conditions. • Power Generation: Suitable for condenser tubing and heat exchangers in environments where both corrosion and high temperature are factors. • Aerospace and Defense: Used in high-performance components requiring durability, resistance to aggressive chemicals, and thermal stability. Key Features: • Manufactured to DIN 2569 standard • Available in PN 100 pressure rating • Excellent corrosion resistance in acidic and marine environments • High mechanical strength and thermal stability • Permanent welded neck design for secure pipe integration • Supplied with test certifications and complete traceability • Custom machining and finishing available including pickling and passivation Conclusion: DIN 2569 Monel Flanges PN 100 from Ladhani Metal Corporation are engineered for critical operations that demand corrosion resistance, strength, and durability under pressure. These flanges are trusted in marine, chemical, and energy sectors, delivering dependable service in the most challenging environments. For tailored specifications, material consultations, or bulk orders, reach out to Ladhani Metal Corporation today.

The DIN 2558 Duplex Flange PN 6 is a high-quality, precision-engineered piping component designed to deliver exceptional mechanical strength and corrosion resistance in harsh industrial environments. Manufactured to DIN (Deutsches Institut für Normung) standards, these flanges are produced using premium duplex stainless steels, which combine the benefits of both austenitic and ferritic stainless steels. Ladhani Metal Corporation supplies these flanges with a strong focus on durability, reliability, and performance under challenging operating conditions. Duplex flanges are widely used in industries such as oil and gas, petrochemical, marine, desalination, pulp and paper, and chemical processing—where resistance to stress corrosion cracking, pitting, and crevice corrosion is essential. The PN 6 pressure rating (6 bar or approximately 87 psi) makes these flanges suitable for medium-pressure systems that demand both structural integrity and long service life. Types: Weld Neck Flange – Provides a robust, welded connection ideal for high-stress, high-temperature applications. Slip-On Flange – Offers ease of installation and is welded on both the inner and outer surfaces for a secure fit. Blind Flange – Used to close the end of a pipe system, ensuring leak-tight sealing. Threaded Flange – Allows for easy, non-welded connection to piping systems with threaded ends. Socket Weld Flange – Ideal for smaller-diameter high-pressure lines, offering smooth flow and strong connections. Grades & Chemical Composition: Duplex 2205 (UNS S31803/S32205): Chromium (Cr): 21.0 – 23.0% Nickel (Ni): 4.5 – 6.5% Molybdenum (Mo): 2.5 – 3.5% Manganese (Mn): ≤ 2.0% Silicon (Si): ≤ 1.0% Nitrogen (N): 0.14 – 0.20% Carbon (C): ≤ 0.03% Iron (Fe): Balance Key Features: Excellent resistance to pitting, crevice corrosion, and chloride-induced stress corrosion cracking. Superior strength compared to standard stainless steels PN 6 Rating: The PN 6 rating signifies a nominal pressure capacity of 6 bar (approximately 87 psi), making these flanges suitable for medium-pressure applications in both industrial and marine systems where enhanced corrosion resistance and mechanical strength are required. Features: Corrosion Resistance: Excellent resistance to a wide range of corrosive environments, especially chlorides and sulfides. High Strength: Duplex steel offers nearly twice the strength of conventional austenitic stainless steel, reducing wall thickness and weight. Stress Corrosion Resistance: Ideal for applications involving aggressive media and fluctuating temperatures. Longevity: Designed to offer extended service life with minimal maintenance in severe environments. Versatile Use: Applicable in offshore platforms, chemical plants, desalination systems, and high-performance piping networks . Cost-Efficient: Combines strength and corrosion resistance, often allowing for reduced material thickness and overall system weight. Ladhani Metal Corporation ensures that each DIN 2558 Duplex Flange is precision-machined and rigorously tested to meet or exceed international standards. These flanges offer a reliable, leak-proof solution for critical piping systems, balancing performance, safety, and long-term value.

DIN 2545 Monel flanges, provided by Ladhani Metal Corporation, are designed to offer exceptional strength and outstanding resistance to corrosion, particularly in harsh environments. Monel alloys, primarily composed of nickel and copper, are known for their ability to withstand the corrosive effects of seawater, acids, and alkalis. These flanges are ideal for high-performance applications in industries such as marine, chemical processing, and oil and gas. With a pressure rating of PN 40, these flanges are capable of handling pressures up to 40 bar, ensuring reliable, leak-free connections in high-pressure systems. Types of DIN 2545 Monel Flanges: Flat Face Flanges (FF) – These flanges have a flat sealing surface that provides uniform distribution of sealing pressure, making them suitable for low-pressure systems or where precise sealing is required. Raised Face Flanges (RF) – Raised face flanges feature a raised area around the bolt holes to provide higher sealing pressure, ideal for high-pressure environments. Ring-Type Joint (RTJ) Flanges – These flanges are designed with a groove to accommodate a metal sealing ring, suitable for applications that require resistance to high pressure and high temperatures. Grades and Chemical Composition: Monel 400 (UNS N04400) Chemical Composition: Ni: 63%, Cu: 28-34%, Fe: 2.5%, Mn: 2%, C: 0.3%, Si: 0.5% Monel 400 is a nickel-copper alloy known for its excellent resistance to corrosion, particularly in seawater and chemical environments. It offers good mechanical properties at both subzero and elevated temperatures. This alloy is commonly used in marine applications, chemical processing, and heat exchangers. Monel K500 (UNS N05500) Chemical Composition: Ni: 63%, Cu: 27%, Al: 2.3-3.15%, Ti: 0.35-0.85%, Fe: 2.5%, C: 0.3%, Mn: 1.5% Monel K500 is an age-hardenable nickel-copper alloy that provides additional strength and hardness compared to Monel 400. It offers outstanding corrosion resistance, particularly in seawater and high-stress environments, making it suitable for use in marine, oil and gas, and aerospace applications. PN 40 Pressure Rating: The "PN" rating refers to the flange's pressure capacity. PN 40 indicates that the flange is rated for pressures up to 40 bar, making it ideal for high-pressure systems where secure and durable connections are essential. Applications: 1. Marine and Offshore Applications: Seawater Systems: Monel is highly resistant to seawater corrosion, making it ideal for use in marine applications, such as seawater cooling systems, pumps, valves, and heat exchangers on ships and offshore platforms. Offshore Pipelines and Risers: Monel flanges are commonly used in subsea pipelines and risers due to their resistance to corrosion from saltwater and high-pressure conditions found in offshore oil and gas operations. 2. Chemical Processing Industry: Acidic Environments: Monel flanges offer superior resistance to various acidic solutions, making them ideal for use in chemical processing plants, especially where sulfuric acid, hydrochloric acid, and other corrosive chemicals are present. Piping Systems: Used in pipelines and reactors that transport corrosive chemicals, Monel flanges ensure long-term reliability and strength in harsh environments. 3. Oil and Gas Industry: Petrochemical Refineries: Monel flanges are used in refining operations, including in heat exchangers, pumps, and piping systems that handle hydrocarbon fluids, ensuring resistance to both pressure and corrosion. Subsea Equipment: Monel is also used in subsea exploration and production equipment due to its ability to withstand harsh marine environments and high-pressure systems. Conclusion : Ladhani Metal Corporation ensures that all Monel flanges meet stringent quality standards and are manufactured to exact specifications, ensuring durability and reliability in even the most challenging environments. Each flange undergoes comprehensive testing to guarantee long-lasting performance and safe operation in high-pressure applications. #din2545 #din2545flanges #din2545monelflanges #flanges #flangessupplierinmumbai

DIN 2545 duplex flanges are designed to provide exceptional strength and corrosion resistance in demanding industrial applications. Ladhani Metal Corporation offers these high-quality flanges made from duplex stainless steel, which combines the best features of both austenitic and ferritic structures. This unique material provides superior resistance to pitting, crevice corrosion, and stress corrosion cracking, making it ideal for use in harsh environments. With a pressure rating of PN 40, these flanges are capable of handling pressures up to 40 bar, ensuring safe and reliable performance in industries such as chemical processing, oil and gas, marine, and offshore platforms. Types of DIN 2545 Duplex Flanges: Flat Face Flanges (FF) – These flanges have a flat surface that facilitates a uniform distribution of the sealing force, making them ideal for low-pressure applications or systems where a secure seal is essential. Raised Face Flanges (RF) – Featuring a raised face around the bolt holes, these flanges provide a higher sealing pressure, ensuring a more reliable seal, especially in higher-pressure environments. Ring-Type Joint (RTJ) Flanges – Designed with a groove for a metal sealing ring, these flanges are suitable for use in applications requiring high pressure and high temperature resistance. Grades and Chemical Composition: -Duplex 2205 (UNS S32205) Chemical Composition: Cr: 22%, Ni: 5-6%, Mo: 3%, N: 0.14-0.2%, Fe: balance Duplex 2205 is the most common duplex stainless steel grade. It offers excellent corrosion resistance in chloride environments, making it suitable for applications like seawater, chemical, and petrochemical processing. The combination of austenitic and ferritic phases gives Duplex 2205 higher strength compared to austenitic stainless steels, along with improved resistance to pitting and stress corrosion cracking. Super Duplex 2507 (UNS S32750) Chemical Composition: Cr: 25%, Ni: 7%, Mo: 4%, N: 0.27%, Fe: balance Super Duplex 2507 is a higher alloy version of Duplex 2205, offering superior resistance to chloride stress corrosion cracking, pitting, and crevice corrosion. It is used in more aggressive environments, such as offshore oil and gas applications, where the material must withstand high pressures and corrosive conditions. Its higher molybdenum and nitrogen content enhances its performance in severe environments. PN 40 Pressure Rating: The "PN" in DIN 2545 refers to the pressure rating, and PN 40 indicates that the flange is designed to handle pressures up to 40 bar. This ensures that the flange is robust and reliable under high-pressure conditions, maintaining secure and leak-proof connections in critical applications. Applications: Oil and Gas Industry: These flanges are widely used in offshore and onshore pipelines, pressure vessels, and other critical infrastructure in oil and gas exploration, extraction, and transportation. Chemical and Petrochemical Industry: Due to their excellent resistance to corrosion, especially in acidic or chloride-rich environments, they are ideal for use in reactors, heat exchangers, and pipelines handling chemicals and petrochemicals. Marine and Offshore Applications: Duplex flanges are highly resistant to seawater corrosion, making them ideal for use in marine environments, such as shipbuilding, offshore rigs, and seawater cooling systems. Water Treatment Plants: These flanges are used in systems that handle aggressive water environments, ensuring durability and long service life in water and wastewater treatment applications. Power Generation: In power plants, these flanges are used in steam lines, cooling systems, and heat exchangers, where strength, corrosion resistance, and high-pressure capabilities are critical. Pharmaceutical Industry: These flanges are used in systems requiring sanitary conditions and resistance to aggressive cleaning solutions, such as in the transportation of chemicals or in reaction vessels. Key Benefits of Duplex Flanges (PN 40): Exceptional strength and corrosion resistance. Resistance to pitting and crevice corrosion. Excellent performance in harsh environments. Cost-effective compared to higher-grade materials for similar applications. DIN 2545 Duplex Flanges (PN 40) are a reliable choice for high-pressure applications in industries that demand both high performance and durability. #din2545 #din2545flanges #din2545duplexflanges #flanges

Ladhani Metal Corporation offers SS 316 Half Round Tube Shields designed to provide robust protection for reheater (R/H) tubes in boilers, power plants, and industrial steam systems. Reheater tubes carry steam through the reheater section of the boiler, where the steam is reheated after partial expansion in the high-pressure turbine to enhance efficiency and reduce moisture formation. Manufactured from molybdenum-bearing austenitic stainless steel grade SS 316, these shields deliver superior resistance to pitting, crevice corrosion, and high-temperature oxidation, making them ideal for aggressive and chloride-containing environments. Function of R/H Tubes • Carry steam through the reheater section of the boiler • Exposed to very high temperatures (often > 540°C) and erosion from flue gases • Often protected with Half Round Tube Shields in high-velocity and abrasive gas flow zones Ladhani Metal Corporation manufactures, supplies, and exports SS 316 Half Round Tube Shields in various lengths, diameters, and thicknesses, meeting both domestic and international quality standards. SS 316 Grade Chemical Composition – Austenitic Stainless Steel • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 16.00 – 18.00% • Nickel (Ni): 10.00 – 14.00% • Molybdenum (Mo): 2.00 – 3.00% • Iron (Fe): Balance Uses • Protects reheater tubes from erosion, oxidation, and chloride-induced corrosion • Shields R/H tubes in high-velocity flue gas and particle-laden zones • Extends service life of steam system components under aggressive operating conditions • Suitable for utility boilers, WHRBs, HRSGs, and process heaters Features • Excellent corrosion resistance – Performs well in chloride-rich and oxidizing environments • High thermal stability – Maintains mechanical strength at elevated temperatures • Molybdenum alloyed – Enhanced resistance to pitting and crevice corrosion • Precision-engineered fit – Designed to match exact tube curvature for maximum coverage Applications • Power generation boilers – Long-term reheater tube protection in severe conditions • Waste heat recovery systems – Guards against erosion from high-velocity particles • Industrial steam plants – Reliable under variable thermal cycles • Petrochemical and marine-based steam systems – Suitable for saline and chloride-heavy atmospheres Conclusion The SS 316 Half Round Tube Shield for Reheater (R/H) Tubes by Ladhani Metal Corporation offers high-performance protection against erosion, oxidation, and corrosive damage in extreme operating environments. Designed for precision fit and durability, these shields reduce maintenance downtime and extend equipment lifespan. Available in a wide range of export-ready specifications, they are trusted by industries worldwide. For technical details and supply inquiries, contact Ladhani Metal Corporation. #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Salem #Erode #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Hassan #Cuttack #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Gaya #Muzaffarpur#halftubeshield #utypehalftubeshield #tubeshieldexporter #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier #SSShielding #IndustrialTubeShield #BoilerTubeGuard #CustomMetalParts #SteelIndustryIndia #MetalEngineering #HeavyIndustrySupply #StainlessSteelIndia #SteelExporters #MetalComponentExport #FabricatedProducts #SteelDealer #IndustrialSupplyIndia #BoilerTubeFittings #TubeShieldingSolutions #HalfTubeCover #HeatExchangerShield #HalfRoundReheaterShield #ReheaterTubeShield #BoilerReheaterProtection #PowerPlantTubeShield #BoilerErosionShield #SteamBoilerTubeShield #HighTempTubeShield #BoilerWearProtection

Ladhani Metal Corporation offers SS 304L Half Round Tube Shields specifically designed to protect reheater (R/H) tubes in boilers, power plants, and industrial steam systems. Reheater tubes carry steam through the reheater section of the boiler, where the steam is reheated after partial expansion in the high-pressure turbine to improve efficiency and prevent moisture formation. Manufactured from low-carbon austenitic stainless steel grade SS 304L, these shields provide excellent corrosion resistance, high-temperature oxidation resistance, and superior weldability, reducing the risk of carbide precipitation during welding. Function of R/H Tubes • Carry steam through the reheater section of the boiler • Exposed to very high temperatures (often > 540°C) and erosion from flue gases • Often protected with Half Round Tube Shields in areas where flue gas velocity and ash particles cause wear Ladhani Metal Corporation manufactures, supplies, and exports SS 304L Half Round Tube Shields in various lengths, diameters, and thicknesses, catering to both domestic and international markets. SS 304L Grade Chemical Composition – Austenitic Stainless Steel • Carbon (C): ≤ 0.03% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 18.00 – 20.00% • Nickel (Ni): 8.00 – 12.00% • Iron (Fe): Balance Applications: Suitable for reheater sections in thermal power plants, waste heat recovery boilers (WHRBs), and heat recovery steam generators (HRSGs) operating in oxidizing and moderately corrosive service environments. Uses • Protects reheater tubes from erosion, oxidation, and soot blower damage • Shields R/H tubes in high-velocity flue gas zones • Extends service life of steam circuit components in high-temperature operations • Applicable in utility boilers, WHRBs, HRSGs, and industrial steam plants Features • Superior corrosion resistance – Ideal for oxidizing boiler atmospheres • High thermal stability – Maintains mechanical integrity at elevated temperatures • Low-carbon content – Minimizes sensitization risk during welding • Precision-engineered fit – Matches exact tube curvature for maximum coverage Applications • Power generation boilers – Protection for reheater tubes under extreme thermal conditions • Waste heat recovery systems – Guards R/H tubes against particle erosion • Industrial steam plants – Reliable in fluctuating temperature cycles • Petrochemical and process heaters – Suitable for high-efficiency reheating sections Conclusion The SS 304L Half Round Tube Shield for Reheater (R/H) Tubes by Ladhani Metal Corporation offers long-lasting, corrosion-resistant protection for tubes operating under extreme temperature and erosive conditions. Designed for precision fit and durability, these shields reduce maintenance needs and extend equipment life, with availability in a wide range of export-ready specifications. For technical details and supply inquiries, contact Ladhani Metal Corporation. #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Salem #Erode #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Hassan #Cuttack #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Gaya #Muzaffarpur#halftubeshield #utypehalftubeshield #tubeshieldexporter #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier #SSShielding #IndustrialTubeShield #BoilerTubeGuard #CustomMetalParts #SteelIndustryIndia #MetalEngineering #HeavyIndustrySupply #StainlessSteelIndia #SteelExporters #MetalComponentExport #FabricatedProducts #SteelDealer #IndustrialSupplyIndia #BoilerTubeFittings #TubeShieldingSolutions #HalfTubeCover #HeatExchangerShield #HalfRoundReheaterShield #ReheaterTubeShield #BoilerReheaterProtection #PowerPlantTubeShield #BoilerErosionShield #SteamBoilerTubeShield #HighTempTubeShield