'chlorideinduced attack'

Ladhani Metal Corporation offers Anti-Corrosion Half Round Tube Shields designed to protect boiler tubes, economizers, superheaters, reheaters, and heat recovery systems from chemical attack, scaling, and oxidation in high-temperature and corrosive environments. These semi-cylindrical shields act as a sacrificial barrier, covering exposed tube surfaces and preventing premature wear caused by flue gas corrosion, ash deposits, and aggressive operating atmospheres. By reducing corrosion-related damage, Anti-Corrosion Half Round Tube Shields extend tube service life, lower maintenance costs, and improve overall boiler efficiency. Function of Anti-Corrosion Half Round Tube Shields • Provide a protective covering against corrosion, oxidation, and scaling • Reduce surface degradation in corrosive gas and ash-laden environments • Extend operational life of tubes under high-temperature service • Minimize shutdowns and replacement costs in boilers and heaters Ladhani Metal Corporation manufactures, supplies, and exports Anti-Corrosion Half Round Tube Shields in a wide range of stainless steels and heat-resistant alloys for domestic and international power and process industries. Available Grades • SS 304 / SS 304L • SS 310 / SS 310S • SS 316 / SS 316L • SS 410 / SS 420 / SS 430 • 1Cr13 • 1Cr18Ni9Ti • 1Cr20Ni14Si2 • 1Cr25Ni20Si2 • Cr23Ni13 • Cr25Ni20 Applications: Widely used in power plants, WHRBs, HRSGs, refinery heaters, petrochemical furnaces, and industrial steam boilers operating in corrosive and high-temperature zones. Uses • Shields boiler tubes against flue gas corrosion and scaling • Protects reheater and superheater sections from oxidation • Extends tube life in economizers and waste heat recovery boilers • Reduces maintenance downtime in petrochemical and refinery heaters Features • Excellent resistance to corrosion and oxidation at elevated temperatures • Strong mechanical performance under cyclic heating conditions • Custom-engineered for precise fit over tube curvature • Easy to install, remove, and replace during boiler overhauls Applications • Thermal power stations – Corrosion protection for superheater and reheater tubes • Waste heat recovery systems – Guards economizer tubes from corrosive flue gases • HRSGs – Reliable under varying operating cycles • Petrochemical and refinery heaters – Durable in aggressive atmospheres Conclusion Anti-Corrosion Half Round Tube Shields by Ladhani Metal Corporation provide long-lasting protection against corrosion, scaling, and oxidation in critical boiler and heater applications. Available in stainless steels and special alloys, these shields are engineered for superior durability, extended service life, and export-quality performance across global power and process industries. #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Muzaffarpur#halftubeshield #utypehalftubeshield #tubeshieldexporter #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier #SSShielding #IndustrialTubeShield #BoilerTubeGuard #CustomMetalParts #SteelIndustryIndia #MetalEngineering #HeavyIndustrySupply #StainlessSteelIndia #SteelExporters #MetalComponentExport #FabricatedProducts #SteelDealer #IndustrialSupplyIndia #BoilerTubeFittings #TubeShieldingSolutions #HalfTubeCover #HeatExchangerShield #HalfRoundReheaterShield #ReheaterTubeShield #BoilerReheaterProtection #PowerPlantTubeShield #BoilerErosionShield #SteamBoilerTubeShield #HighTempTubeShield #BoilerWearProtection

Ladhani Metal Corporation manufactures and supplies SS Half Round Tube Shields for LTSH (Low Temperature Superheater) Tubes, Type-III configuration, specially designed to protect boiler tubes from erosion, oxidation, and high-temperature wear. LTSH tubes operate in the convection pass of boilers where they are exposed to flue gas velocity and abrasive ash particles, leading to tube thinning and early failures. Type-III Half Round Shields provide enhanced coverage and robust strength, ensuring reliable performance and extended service life of boiler tubes. Function of LTSH Tubes • Carry steam through the low-temperature superheater section of the boiler • Continuously exposed to ash-laden flue gases and moderate-to-high velocity erosion • Protected using Half Round Tube Shields to minimize wear, damage, and oxidation Ladhani Metal Corporation manufactures, supplies, and exports SS Half Round Tube Shields for LTSH, Type-III, in multiple grades, sizes, and dimensions to meet both domestic and international boiler requirements. Available Grades • SS 304 / SS 304L • SS 310 / SS 310S • SS 316 / SS 316L • SS 410 / SS 420 / SS 430 • 1Cr13 • 1Cr18Ni9Ti • 1Cr20Ni14Si2 • 1Cr25Ni20Si2 • Cr23Ni13 • Cr25Ni20 Applications: Designed for low-temperature superheater sections in power plants, HRSGs, WHRBs, and industrial boilers, where erosion protection and thermal stability are essential. Uses • Shields LTSH tubes against erosion, scaling, and soot blower abrasion • Prevents premature tube wear in high-dust and flue gas zones • Extends service life of superheater tubes under cyclic thermal loads • Reduces operational downtime and maintenance costs Features • Excellent resistance to erosion and flue gas oxidation • Thermal stability under varying boiler operating conditions • Manufactured from high-quality stainless steels and special alloys • Precisely engineered for Type-III LTSH tube geometry and easy installation Applications • Power generation boilers – Protection for LTSH tubes in erosive sections • Waste heat recovery boilers – Prevents wear from high-velocity gas streams • Heat recovery steam generators – Reliable for cyclic operations • Industrial boilers – Provides consistent erosion resistance in superheater tubes Conclusion The SS Half Round Tube Shield for LTSH, Type-III, by Ladhani Metal Corporation provides durable and reliable protection for boiler tubes exposed to high-temperature erosion and flue gas attack. Available in grades SS 304/304L, SS 310/310S, SS 316/316L, SS 410/420/430, 1Cr13, 1Cr18Ni9Ti, 1Cr20Ni14Si2, 1Cr25Ni20Si2, Cr23Ni13, and Cr25Ni20, these shields are precision-engineered to meet global standards. For technical details and procurement inquiries, contact Ladhani Metal Corporation. #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Muzaffarpur#halftubeshield #utypehalftubeshield #tubeshieldexporter #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier #SSShielding #IndustrialTubeShield #BoilerTubeGuard #CustomMetalParts #SteelIndustryIndia #MetalEngineering #HeavyIndustrySupply #StainlessSteelIndia #SteelExporters #MetalComponentExport #FabricatedProducts #SteelDealer #IndustrialSupplyIndia #BoilerTubeFittings #TubeShieldingSolutions #HalfTubeCover #HeatExchangerShield #HalfRoundReheaterShield #ReheaterTubeShield #BoilerReheaterProtection #PowerPlantTubeShield #BoilerErosionShield #SteamBoilerTubeShield #HighTempTubeShield #BoilerWearProtection

Product name:6mm Titanium plate Unit price:$14-$36.9/kg Material: Titanium grade 1 grade 2 grade 3 grade 4 Grade 5 (Ti6al4v),grade 7,grade 12 etc. Standard: ASTM/ASME B265 AMS 4911 ASTM F136 ASTM F67 etc. Demension: Thickness*1000*2000mm Thickness*3000*6000mm (Standard size); Thickness: 0.5mm; 0.8mm; 1.0mm; 1.2mm; 1.5mm; 2.0mm; 3.0mm; 4.0mm ......40mm etc br>Technique : Rolled Status: Annealed(M) A Thin Titanium Sheet is slow to react with water and air at ambient temperatures. Since, on exposure to both mediums, the Titanium Alloy Plate forms a passive oxide coating or coating which protects the bulk metal from further oxidation. Titanium Sheets Suppliers note that Atmospheric passivation gives Titanium Foil Sheet excellent resistance to corrosion. Though, as a metal Titanium Alloy Sheet is capable of withstanding attack by dilute sulfuric acid and hydrochloric acids, chloride solutions, as well as most organic acids ; However, Titanium Sheet Metal can be corroded by concentrated acids. Material Pure Titanium plate and titanium alloy plate Standard ASTM B265, ASME SB265, AMS 4900, AMS 4901, AMS 4902 Type Clad Plate, Rolling Plate, Flat Shim, Plain Sheet, Rolling Sheet Rolls, Foils, Coils, Plate, Strip, Sheet, Flats, Blank (Circle), ,Flat Sheet, Shim Sheet, soft annealed, descaled, sheared, annealed, Checker Plate, tread plate ASTM B265 Titanium Plate surface Hot rolled plate (HR), Cold rolled sheet (CR), No.1 finish hot rolled ASTM B265 Titanium Plate, BA, No.3, No.4, No.6, No.1, No. 2D, No. 2B, BA NO(8), No.7, 2B, 2D, SATIN (Met with Plastic Coated), 2B, 1D, No.4, 8K, BA, hairline, brush, satin, mirror etc. ASTM B265 Titanium Plate Length 0-12mm or as required Titanium Plate Thickness 0.3 to 1200 mm or as required Titanium Alloy Plate Width 0-3000mm or as required Titanium alloy Plate Process Hot/ Cold Rolled ASTM B265 Titanium Grade 2 Sheet ASTM B265 Titanium Grade 5 Sheet ASTM B265 Titanium Grade 12 Sheet Sizes T(0.5-60) x 1000 x 2000mm Physical Properties Tensile Strength(min) Yeild Strength(min) Elongation(%) ksi MPa ksi MPa Grade 1 35 240 20 138 24 Grade2 50 345 40 275 20 Grade 3 65 450 55 380 18 Grade 4 80 550 70 483 15 Grade 5 130 895 120 828 10 Grade 7 50 345 40 275 20 Grade 12 70 483 50 345 18

LADHANI METAL CORPORATION Stainless Steel 317/317L is a molybdenum containing, low carbon austenitic stainless steel with increased additions of chromium, nickel, and molybdenum for better corrosion resistance and increased resistance to chemical attack for sulfurous, acetic, formic, citric, and tartaric acids. Due to its low carbon content, 317/317L also provides resistance to sensitization when welded and higher creep, stress to rupture, and tensile strength at elevated temperatures. It is non-magnetic in the annealed condition but may become slightly magnetic after welding. Since our establishment, we have become the well-known manufacturer, exporter and supplier of a high quality array of SS 317 Fittings. The offered range is manufactured by utilizing high grade raw material and advance technology by our skilled professionals. Apart from this, our range is tested on various parameters in order to ensure its durability and quality. Clients can avail these products from us in different specifications and at affordable prices. Features: Durability Finally finished Anti-corrosive RANGE : 15NB-1200NB. SCH:5, 10, 20, 30, 40, 60, 80, 100, 120, 140, 160, XXS. TYPE : Elbow: 45, 90 & 180Deg. Radius. Tee: Equal & UnEqual. Bend: Short & Long Radius. 1.5D, 2.5D, 3D, 5D, 6D, 10D. Stubend: Short & Long Neck Nipples, Caps & Triclover clamp,

LADHANI METAL CORPORATION Stainless Steel 317/317L is a molybdenum containing, low carbon austenitic stainless steel with increased additions of chromium, nickel, and molybdenum for better corrosion resistance and increased resistance to chemical attack for sulfurous, acetic, formic, citric, and tartaric acids. Due to its low carbon content, 317/317L also provides resistance to sensitization when welded and higher creep, stress to rupture, and tensile strength at elevated temperatures. It is non-magnetic in the annealed condition but may become slightly magnetic after welding. Since our establishment, we have become the well-known manufacturer, exporter and supplier of a high quality array of SS 317 Fittings. The offered range is manufactured by utilizing high grade raw material and advance technology by our skilled professionals. Apart from this, our range is tested on various parameters in order to ensure its durability and quality. Clients can avail these products from us in different specifications and at affordable prices. Features: Durability Finally finished Anti-corrosive RANGE : 15NB-1200NB. SCH:5, 10, 20, 30, 40, 60, 80, 100, 120, 140, 160, XXS. TYPE : Elbow: 45, 90 & 180Deg. Radius. Tee: Equal & UnEqual. Bend: Short & Long Radius. 1.5D, 2.5D, 3D, 5D, 6D, 10D. Stubend: Short & Long Neck Nipples, Caps & Triclover clamp,

LADHANI METAL CORPORATION Stainless Steel 317/317L is a molybdenum containing, low carbon austenitic stainless steel with increased additions of chromium, nickel, and molybdenum for better corrosion resistance and increased resistance to chemical attack for sulfurous, acetic, formic, citric, and tartaric acids. Due to its low carbon content, 317/317L also provides resistance to sensitization when welded and higher creep, stress to rupture, and tensile strength at elevated temperatures. It is non-magnetic in the annealed condition but may become slightly magnetic after welding. Since our establishment, we have become the well-known manufacturer, exporter and supplier of a high quality array of SS 317 Fittings. The offered range is manufactured by utilizing high grade raw material and advance technology by our skilled professionals. Apart from this, our range is tested on various parameters in order to ensure its durability and quality. Clients can avail these products from us in different specifications and at affordable prices. Features: Durability Finally finished Anti-corrosive RANGE : 15NB-1200NB. SCH:5, 10, 20, 30, 40, 60, 80, 100, 120, 140, 160, XXS. TYPE : Elbow: 45, 90 & 180Deg. Radius. Tee: Equal & UnEqual. Bend: Short & Long Radius. 1.5D, 2.5D, 3D, 5D, 6D, 10D. Stubend: Short & Long Neck Nipples, Caps & Triclover clamp,

LADHANI METAL CORPORATION Stainless Steel 317/317L is a molybdenum containing, low carbon austenitic stainless steel with increased additions of chromium, nickel, and molybdenum for better corrosion resistance and increased resistance to chemical attack for sulfurous, acetic, formic, citric, and tartaric acids. Due to its low carbon content, 317/317L also provides resistance to sensitization when welded and higher creep, stress to rupture, and tensile strength at elevated temperatures. It is non-magnetic in the annealed condition but may become slightly magnetic after welding. Since our establishment, we have become the well-known manufacturer, exporter and supplier of a high quality array of SS 317 Fittings. The offered range is manufactured by utilizing high grade raw material and advance technology by our skilled professionals. Apart from this, our range is tested on various parameters in order to ensure its durability and quality. Clients can avail these products from us in different specifications and at affordable prices. Features: Durability Finally finished Anti-corrosive RANGE : 15NB-1200NB. SCH:5, 10, 20, 30, 40, 60, 80, 100, 120, 140, 160, XXS. TYPE : Elbow: 45, 90 & 180Deg. Radius. Tee: Equal & UnEqual. Bend: Short & Long Radius. 1.5D, 2.5D, 3D, 5D, 6D, 10D. Stubend: Short & Long Neck Nipples, Caps & Triclover clamp,

LADHANI METAL CORPORATION Stainless Steel 317/317L is a molybdenum containing, low carbon austenitic stainless steel with increased additions of chromium, nickel, and molybdenum for better corrosion resistance and increased resistance to chemical attack for sulfurous, acetic, formic, citric, and tartaric acids. Due to its low carbon content, 317/317L also provides resistance to sensitization when welded and higher creep, stress to rupture, and tensile strength at elevated temperatures. It is non-magnetic in the annealed condition but may become slightly magnetic after welding. Since our establishment, we have become the well-known manufacturer, exporter and supplier of a high quality array of SS 317 Fittings. The offered range is manufactured by utilizing high grade raw material and advance technology by our skilled professionals. Apart from this, our range is tested on various parameters in order to ensure its durability and quality. Clients can avail these products from us in different specifications and at affordable prices. Features: Durability Finally finished Anti-corrosive RANGE : 15NB-1200NB. SCH:5, 10, 20, 30, 40, 60, 80, 100, 120, 140, 160, XXS. TYPE : Elbow: 45, 90 & 180Deg. Radius. Tee: Equal & UnEqual. Bend: Short & Long Radius. 1.5D, 2.5D, 3D, 5D, 6D, 10D. Stubend: Short & Long Neck Nipples, Caps & Triclover clamp,

LADHANI METAL CORPORATION Stainless Steel 317/317L is a molybdenum containing, low carbon austenitic stainless steel with increased additions of chromium, nickel, and molybdenum for better corrosion resistance and increased resistance to chemical attack for sulfurous, acetic, formic, citric, and tartaric acids. Due to its low carbon content, 317/317L also provides resistance to sensitization when welded and higher creep, stress to rupture, and tensile strength at elevated temperatures. It is non-magnetic in the annealed condition but may become slightly magnetic after welding. Since our establishment, we have become the well-known manufacturer, exporter and supplier of a high quality array of SS 317 Fittings. The offered range is manufactured by utilizing high grade raw material and advance technology by our skilled professionals. Apart from this, our range is tested on various parameters in order to ensure its durability and quality. Clients can avail these products from us in different specifications and at affordable prices. Features: Durability Finally finished Anti-corrosive RANGE : 15NB-1200NB. SCH:5, 10, 20, 30, 40, 60, 80, 100, 120, 140, 160, XXS. TYPE : Elbow: 45, 90 & 180Deg. Radius. Tee: Equal & UnEqual. Bend: Short & Long Radius. 1.5D, 2.5D, 3D, 5D, 6D, 10D. Stubend: Short & Long Neck Nipples, Caps & Triclover clamp,