DIN 2633 carbon steel flanges PN 16 are reliable weld neck flanges manufactured in compliance with the DIN 2633 standard. Designed for use in medium-pressure piping systems with a pressure rating of up to 16 bar (232 psi), these flanges are fabricated from high-quality carbon steel, providing dependable mechanical strength and ease of fabrication. They are widely utilized in a range of general industrial and utility applications where corrosion resistance demands are moderate. Ladhani Metal Corporation is a globally trusted manufacturer and supplier of carbon steel flanges, recognized for high-precision production, rigorous quality assurance, and strict adherence to international material and dimensional standards. Every flange is tested to ensure consistent performance, mechanical integrity, and compatibility with a variety of piping systems. Pressure Rating: • PN 16 (16 bar / 232 psi): Suitable for medium-pressure systems requiring strong, cost-effective, and durable connections. Flange Type: • Weld Neck Flanges Featuring an extended tapered hub, weld neck flanges help evenly distribute mechanical stress and ensure secure, vibration-resistant joints, particularly effective in systems subject to bending or thermal expansion. • Flat Face (FF) Flanges Ideal for use with soft gaskets or cast iron components, flat face flanges ensure even gasket compression, reducing the risk of flange warping or over-tightening. Carbon Steel Grades and General Composition: Typical Carbon Steel Grade: ASTM A105 (for forged carbon steel flanges) • Carbon (C): 0.35% max • Manganese (Mn): 0.60 – 1.05% • Phosphorus (P): 0.035% max • Sulfur (S): 0.040% max • Silicon (Si): 0.10 – 0.35% • Iron (Fe): Balance Applications: Carbon steel flanges to DIN 2633 PN 16 are widely applied in environments where corrosion resistance is not the primary concern but where mechanical strength, weldability, and cost-efficiency are essential. Applications of DIN 2633 Carbon Steel Flanges PN 16: • Power Plants Used in steam, water, and air systems for medium-pressure operations. • Water Treatment and Distribution Well-suited for water mains, treatment facilities, and irrigation networks where strength and reliability are critical. • Petrochemical and Refining Industries Employed in non-corrosive process piping, utility lines, and support systems. • HVAC and Fire Protection Systems Ideal for chilled water, fire suppression, and compressed air applications. • General Industrial Manufacturing Used in structural piping systems and mechanical infrastructure with stable temperature and pressure conditions. Key Features: • Manufactured to DIN 2633 specifications • PN 16 pressure rating for medium-duty service • Weld neck configuration provides robust, leak-resistant connections • Cost-effective and easy to fabricate and install • Excellent machinability and weldability • Available in various sizes and configurations • Coating and corrosion protection options available upon request Conclusion: DIN 2633 carbon steel flanges PN 16 from Ladhani Metal Corporation are engineered for dependable performance in standard industrial environments. With proven strength, versatility, and affordability, these flanges are a reliable choice for water, steam, gas, and general utility applications. For detailed technical specifications, custom options, or pricing inquiries, contact Ladhani Metal Corporation today.

DIN 2630 carbon steel flanges PN 2.5 are precision-engineered weld neck flanges designed in accordance with the DIN 2630 standard, suitable for low-pressure applications up to 2.5 bar (36.25 psi). Manufactured from high-quality carbon steel grades such as ASTM A105 and A350 LF2, these flanges offer reliable mechanical strength and excellent weldability. Carbon steel flanges are ideal for general-purpose piping systems where toughness, cost-effectiveness, and structural integrity are required in low-pressure environments. Ladhani Metal Corporation is a trusted global manufacturer and supplier of carbon steel flanges, known for delivering quality components built to meet international standards. Our DIN 2630 PN 2.5 carbon steel weld neck flanges are widely used in industries such as oil and gas, water treatment, power generation, and general manufacturing. Every flange is manufactured under stringent quality control to ensure performance, durability, and compliance with customer requirements. Pressure Rating: • PN 2.5 (2.5 bar / 36.25 psi): Designed for low-pressure systems requiring durable, cost-effective materials with high mechanical strength. Flange Type: • Weld Neck Flanges Equipped with a long tapered hub to ensure smooth fluid flow and reduce stress concentration, these flanges are suited for critical applications involving pressure and temperature changes. • Flat Face (FF) Flanges Flat face flanges provide uniform gasket compression, especially when used with cast components or soft gasket materials in low-pressure setups. Carbon Steel Grades and Chemical Composition: ASTM A105 (Forged Carbon Steel) • Carbon (C): ≤ 0.35% • Manganese (Mn): 0.60 – 1.05% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.040% • Silicon (Si): 0.10 – 0.35% Applications: Commonly used in ambient- and high-temperature service in pressure systems. Ideal for general-purpose industrial piping, valve connections, and flanged joints. ASTM A350 LF2 (Low-Temperature Carbon Steel) • Carbon (C): ≤ 0.30% • Manganese (Mn): 0.60 – 1.35% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.040% • Silicon (Si): 0.15 – 0.30% Applications: Designed for low-temperature services where enhanced notch toughness is essential, such as cryogenic and refrigerated systems. Applications of DIN 2630 Carbon Steel Flanges PN 2.5: • Oil and Gas Industry Used in upstream and downstream piping for fluid transport under low-pressure conditions. • Water Treatment Plants Ideal for piping systems handling potable water, wastewater, and industrial effluents. • Power Generation Applied in cooling systems, boilers, and auxiliary piping in thermal and hydroelectric power plants. • General Industrial Use Suitable for manufacturing facilities, mechanical piping, and structural connections. Key Features: • Manufactured as per DIN 2630 standards • PN 2.5 pressure class for low-pressure piping systems • Weld neck design improves mechanical stability and flow characteristics • Flat face option enables consistent sealing with softer gasket materials • High strength, excellent machinability, and cost-efficiency • Available in standard and customized sizes, face types, and surface finishes Conclusion: DIN 2630 Carbon Steel Flanges PN 2.5 from Ladhani Metal Corporation provide a practical and durable solution for low-pressure piping systems across various industries. With strong mechanical properties, reliable performance, and economical pricing, these flanges are ideal for applications requiring consistent quality and weldability. For technical support, custom solutions, or pricing, contact Ladhani Metal Corporation.

DIN 2628 Carbon Steel flanges PN 250 are heavy-duty weld neck flanges manufactured in accordance with the DIN 2628 standard, designed for use in high-pressure systems operating up to 250 bar (3625 psi). These flanges are crafted from robust carbon steel grades, offering excellent mechanical strength, weldability, and cost-efficiency. With high tensile strength and good resistance to wear and fatigue, carbon steel flanges are ideal for structural and pressure-bearing applications in industries where corrosion is not a primary concern or where protective coatings are applied. Ladhani Metal Corporation supplies a comprehensive range of DIN 2628 PN 250 Carbon Steel flanges, engineered for demanding industrial environments. Known for precision machining, quality assurance, and consistent performance, our flanges are widely used in sectors such as oil and gas, power generation, water treatment, construction, and mechanical engineering. These flanges provide a reliable connection in pipeline systems that require durable performance under high pressure and mechanical stress. Pressure Rating: • PN 250 (250 bar / 3625 psi): Designed for high-pressure applications that demand strength, durability, and tight sealing under elevated loads. Flange Type: • Weld Neck Flanges Equipped with a tapered hub that enhances mechanical stability and reduces stress concentration at the weld. Ideal for fluctuating temperatures and high-pressure service. • Flat Face (FF) Flanges Flat face design allows for even gasket compression, reducing the risk of leakage when connected to cast or brittle piping components. Carbon Steel Grades and Composition: Common Grades: ASTM A105, ASTM A350 LF2 ASTM A105 • Carbon (C): ≤ 0.35% • Manganese (Mn): 0.60 – 1.05% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.040% • Silicon (Si): 0.10 – 0.35% Applications: Forged carbon steel used in ambient and high-temperature service. Ideal for valves, fittings, and flanges in oil, gas, and industrial pipelines. ASTM A350 LF2 • Carbon (C): ≤ 0.30% • Manganese (Mn): 0.60 – 1.35% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.040% • Silicon (Si): 0.15 – 0.30% Applications: Low-temperature carbon steel suitable for cryogenic and sub-zero environments. Commonly used in pipeline systems, compressors, and pressure vessels. Applications of DIN 2628 Carbon Steel Flanges PN 250: • Oil and Gas Pipelines Used in high-pressure oil, gas, and petrochemical systems where strength and structural integrity are critical. • Power Generation Applied in steam and thermal power plants, including boiler systems and heat exchangers. • Mechanical and Structural Systems Suitable for heavy-duty machinery, process piping, and structural pipe connections. • Water Treatment and Distribution Utilized in potable water and wastewater infrastructure requiring reliable, high-strength components. • HVAC and Industrial Utilities Installed in heating, ventilation, and compressed air systems operating at elevated pressures. Key Features: • Complies with DIN 2628 standard for high-pressure flange applications • PN 250 rating supports high-load, high-stress operational conditions • Weld neck design for optimal flow and reduced weld stress • Flat face option for even gasket pressure and secure sealing • Available in ASTM A105 and A350 LF2 grades • High mechanical strength and excellent machinability • Cost-effective option for non-corrosive or coated environments • Custom sizes, finishes, and drilling patterns available upon request Conclusion: DIN 2628 Carbon Steel Flanges PN 250 by Ladhani Metal Corporation offer a durable, economical solution for high-pressure systems in a variety of industrial applications. With excellent mechanical strength and versatility, these flanges are engineered to perform reliably in demanding environments where corrosion resistance is secondary to pressure and structural requirements. Contact Ladhani Metal Corporation for specifications, technical assistance, or to request a custom quotation for your project needs.

DIN 2573 Carbon Steel Flanges PN 6 are robust, low-pressure plate flanges manufactured from high-quality carbon steel, specifically developed for general-purpose applications in non-corrosive to mildly corrosive environments. These flanges are designed in accordance with the DIN 2573 standard and are widely used in industrial piping systems where moderate strength and affordability are key requirements. Their simple design and ease of installation make them suitable for low-pressure fluid transfer, air, steam, and water systems across various industries. Ladhani Metal Corporation is a reputable manufacturer and exporter of carbon steel flanges, offering products that adhere to strict international quality and dimensional standards. The DIN 2573 plate flange configuration provides a secure, gasket-sealed connection, ensuring reliable performance even in basic utility and mechanical piping systems. Pressure Rating: • PN 6 (6 bar / 87 psi): Suitable for low-pressure applications involving air, water, oil, and non-aggressive fluids in industrial or mechanical systems. Flange Types: • Plate Flanges Flat flanges designed for easy bolting and gasket sealing, offering a reliable connection in low-pressure systems. • Flat Face (FF) Flanges Ideal for systems using cast iron or non-metallic components, these flanges provide uniform gasket compression and reduce the risk of flange distortion. • Slip-On Flanges These flanges slide over the pipe and are welded on both sides, ensuring secure attachment and proper alignment in basic fluid and gas systems. • Custom-Machined Flanges Available in a variety of sizes and finishes, custom carbon steel flanges can be tailored to meet project-specific requirements. Carbon Steel Grades and Composition: Carbon Steel A105 (Forged) Composition: • Carbon (C): 0.35% max • Manganese (Mn): 0.60 – 1.05% • Phosphorus (P): 0.035% max • Sulfur (S): 0.040% max • Silicon (Si): 0.10 – 0.35% • Iron (Fe): Balance Applications: A105 carbon steel is commonly used for flanges in ambient and elevated temperature service, especially in oil and gas, water transmission, and mechanical systems. Its good machinability and weldability make it a cost-effective choice for general use. Carbon Steel ST37 / S235JR Composition: • Carbon (C): 0.17 – 0.20% • Manganese (Mn): ≤ 1.4% • Phosphorus (P) and Sulfur (S): ≤ 0.045% • Iron (Fe): Balance Applications: Used in structural piping, water distribution, fire protection systems, and low-pressure industrial piping. ST37/S235JR flanges offer reliable performance in applications where corrosion is minimal and pressure requirements are moderate. Applications of DIN 2573 Carbon Steel Flanges: • Water Distribution Systems: Used in water pipelines, treatment plants, and municipal systems where pressure ratings are low and material strength is sufficient. • HVAC and Utility Systems: Ideal for heating, ventilation, and cooling systems that operate under low pressure with non-corrosive fluids. • Oil and Gas (Low Pressure Segments): Applicable in low-pressure oil pipelines, tank farms, and non-critical utility lines. • General Industrial Piping: Widely used in manufacturing facilities for compressed air, inert gas lines, and general fluid handling. • Fire Protection Systems: Carbon steel flanges are commonly used in fire sprinkler systems and standpipe installations. Key Features: • Manufactured according to DIN 2573 specifications • PN 6 pressure rating for low-pressure fluid and utility applications • Excellent strength, machinability, and weldability • Cost-effective solution for non-aggressive environments • Available in A105, ST37, S235JR, and other carbon steel grades • Suitable for mechanical systems, utilities, and water transmission • Custom face finishes, drilling, and dimensions available Conclusion: DIN 2573 Carbon Steel Flanges PN 6 from Ladhani Metal Corporation offer a durable and economical choice for a wide range of low-pressure applications. Combining structural strength with manufacturing precision, these flanges are ideal for utility piping, water distribution, and general industrial use. For detailed technical support, custom dimensions, or pricing inquiries, contact Ladhani Metal Corporation today. 📞 Contact Ladhani Metal Corporation Website: https://www.ladhanimetal.in/ https://www.ladhanimetal.com/ Email: info@ladhanimetals.com Request a Quote: Custom dimensions, materials, and finishes available upon request

DIN 2573 Inconel Flanges PN 6 are precision-manufactured low-pressure plate flanges made from high-performance Inconel alloys, specifically engineered for highly corrosive and thermally challenging environments. Compliant with DIN 2573 standards, these flanges are ideally suited for low-pressure applications that demand exceptional resistance to oxidation, acids, and high-temperature stress. Inconel’s unique properties make these flanges suitable for aggressive processing systems in industries such as chemical manufacturing, petrochemicals, marine, power generation, and aerospace. Ladhani Metal Corporation is a recognized manufacturer and global supplier of Inconel alloy flanges, delivering premium-quality components built to international specifications. The DIN 2573 plate flange design ensures straightforward installation while providing excellent sealing reliability, especially in environments where conventional materials may degrade rapidly. Pressure Rating: • PN 6 (6 bar / 87 psi): Designed for low-pressure systems that operate under harsh chemical, thermal, or oxidative conditions, providing long-term durability and consistent performance. Flange Types: • Plate Flanges Flat-ring type flanges used in systems where welding and bolting are required, with gasket sealing for low-pressure flow lines. • Flat Face (FF) Flanges Used with flat gaskets and mating surfaces, especially in brittle or cast systems where full contact and load distribution are critical. • Slip-On Flanges Ease of installation and alignment with the pipe make these ideal for maintenance-friendly or modular low-pressure piping. • Custom-Machined Flanges Precision-machined to customer-defined sizes, Inconel grades, drilling standards, and flange face finishes. Inconel Grades and Composition: 1. Inconel 600 (UNS N06600) Composition: • Nickel (Ni): ≥ 72% • Chromium (Cr): 14.0 – 17.0% • Iron (Fe): 6.0 – 10.0% • Manganese (Mn), Silicon (Si), Carbon (C): Trace amounts Applications: Commonly used in heat exchangers, furnace components, and food processing equipment exposed to high temperatures and oxidizing chemicals. 2. Inconel 625 (UNS N06625) Composition: • Nickel (Ni): ≥ 58.0% • Chromium (Cr): 20.0 – 23.0% • Molybdenum (Mo): 8.0 – 10.0% • Niobium (Nb): 3.15 – 4.15% Applications: Ideal for seawater equipment, chemical processing plants, aerospace exhaust systems, and nuclear reactors due to excellent resistance to pitting, crevice corrosion, and stress corrosion cracking. 3. Inconel 718 (UNS N07718) Composition: • Nickel (Ni): 50.0 – 55.0% • Chromium (Cr): 17.0 – 21.0% • Iron (Fe): Balance • Molybdenum (Mo): 2.8 – 3.3% • Niobium (Nb): 4.75 – 5.5% • Titanium (Ti): 0.65 – 1.15% • Aluminum (Al): 0.2 – 0.8% Applications: Primarily used in aerospace, gas turbines, and cryogenic systems due to its exceptional high-temperature strength, oxidation resistance, and good weldability. It is ideal for use in extreme thermal environments, such as turbine engines and high-pressure systems. Applications of DIN 2573 Inconel Flanges: • Chemical and Acid Processing Plants: Withstand highly corrosive chemicals such as nitric, hydrochloric, and sulfuric acid under thermal cycling. • Power Generation and Heat Exchangers: Resist oxidation and high-temperature fatigue in boiler feed systems, turbine piping, and condensate lines. • Marine and Offshore Installations: Provide excellent resistance to seawater, salt spray, and chloride-induced stress corrosion cracking. • Aerospace and Jet Engine Systems: Used in fuel, exhaust, and cooling systems where heat and corrosion resistance are critical. • Environmental and Waste Treatment Facilities: Endure aggressive chemical waste, thermal gradients, and acidic sludges in scrubbing and exhaust ducting systems. Key Features: • Designed according to DIN 2573 standards • PN 6 rating for low-pressure service with high chemical and thermal loads • Outstanding resistance to acids, chlorides, oxidation, and high temperatures • Available in Inconel 600, 625, 718, and other high-nickel alloys • Low maintenance and long service life in corrosive environments • Machinable for customized face types and bolt hole configurations Conclusion: DIN 2573 Inconel Flanges PN 6 from Ladhani Metal Corporation are engineered for performance in chemically aggressive and thermally intense low-pressure systems. With superior corrosion and heat resistance, these flanges are a critical component in applications where traditional materials fail. For specific alloy recommendations, custom dimensions, or technical support, contact Ladhani Metal Corporation today.

DIN 2566 carbon steel flanges PN 16 are durable and cost-effective threaded flanges designed for medium-pressure piping systems. Manufactured according to DIN 2566 standards, these flanges offer reliable, weld-free connections suitable for a wide range of industrial applications. Their threaded design ensures easy installation and removal, especially in setups requiring frequent maintenance or modifications. Ladhani Metal Corporation is a leading manufacturer and exporter of carbon steel flanges, delivering precision-engineered components with high mechanical strength, toughness, and machinability. DIN 2566 carbon steel flanges are widely used across industries such as oil & gas, power generation, construction, and water treatment. Flange Types: • Threaded (Screwed) Flanges: Enable fast, non-welded assembly—ideal for maintenance-driven or temporary systems. • Raised Face (RF) Flanges: Improve gasket sealing by focusing pressure on a smaller contact area. • Flat Face (FF) Flanges: Commonly used with cast iron or non-metallic equipment in low-to-medium pressure systems. • Forged Threaded Flanges: Provide enhanced strength, impact resistance, and dimensional accuracy. • Custom-Machined Flanges: Made to customer specifications including pressure class, size, or material variant. Available Carbon Steel Grades and Composition: 1. ASTM A105 (Forged Carbon Steel) • Carbon (C): ≤ 0.35% • Manganese (Mn): 0.60 – 1.05% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.040% • Silicon (Si): 0.10 – 0.35% Applications: Used in ambient and high-temperature pressure systems, including pipelines, valves, and pressure vessels. 2. ASTM A350 LF2 (Low-Temperature Carbon Steel) • Designed for increased impact resistance at low temperatures. • Offers good weldability and strength retention in cryogenic or sub-zero conditions. Applications: Ideal for cold weather installations such as gas processing, refrigeration lines, and cryogenic piping systems. Applications of DIN 2566 Carbon Steel Flanges: • Oil & Gas Industry: Used in pipelines, compressor units, and flow control systems • Petrochemical Plants: Handles hydrocarbons and other industrial fluids • Power Plants: Suitable for steam, gas, and cooling water pipelines • Water & Wastewater Treatment: Cost-effective for fluid handling and filtration lines • Structural & Mechanical Systems: Common in HVAC, infrastructure, and general engineering Key Features: • Manufactured to DIN 2566 standard with PN 16 pressure rating • High tensile strength, ductility, and resistance to wear • Economical and versatile for general-purpose applications • Threaded design for quick, weld-free installation • Compatible with coatings and protective treatments • Supplied with test certificates, inspection reports, and full material traceability Conclusion: DIN 2566 carbon steel flanges PN 16 from Ladhani Metal Corporation are a dependable and budget-friendly solution for medium-pressure piping systems. Known for their mechanical strength, reliability, and ease of installation, these flanges are engineered to perform in a wide variety of industrial environments. For detailed specifications, customization, or large-volume orders, contact Ladhani Metal Corporation today.

Ladhani Metal Corporation is a leading manufacturer and exporter of DIN 2565 carbon steel flanges, designed to provide strong, reliable, and cost-effective connections in low-pressure piping systems. Manufactured in accordance with DIN 2565 standards and available in PN 6 pressure rating, these threaded flanges are ideal for non-welded piping setups, especially in maintenance-friendly or temporary installations. Carbon steel flanges offer a combination of durability, toughness, and affordability. Their versatility makes them a widely preferred choice across industries such as oil and gas, construction, power generation, water treatment, and general engineering applications. Flange Types: • Threaded (Screwed) Flanges: Designed for quick assembly without welding, ideal for applications requiring frequent dismantling or modifications. • Raised Face (RF) Flanges: Helps create a tighter seal by concentrating pressure on the gasket, minimizing leakage. • Flat Face (FF) Flanges: Commonly used with cast iron or non-metallic components in low-pressure pipelines. • Forged Threaded Flanges: Forged for superior strength, impact resistance, and dimensional accuracy. • Custom-Machined Flanges: Tailored to meet specific customer requirements in terms of pressure class, dimensions, or material properties. Available Carbon Steel Grades and Composition: 1. ASTM A105 (Forged Carbon Steel) o Carbon (C): ≤ 0.35% o Manganese (Mn): 0.60 – 1.05% o Phosphorus (P): ≤ 0.035% o Sulfur (S): ≤ 0.040% o Silicon (Si): 0.10 – 0.35% Applications: Widely used in pressure systems at ambient and higher temperatures. Suitable for oil & gas pipelines, valves, and pressure vessels. 2. ASTM A350 LF2 (Low Temperature Carbon Steel) o Designed for low-temperature service with added toughness and impact resistance. Applications: Used in cryogenic and sub-zero temperature systems, such as gas processing and cold storage piping. Applications of DIN 2565 Carbon Steel Flanges: • Oil & Gas Industry: Used in pipelines, valve connections, and flow systems. • Petrochemical and Refineries: Suitable for systems transporting hydrocarbons and chemicals. • Power Plants: Applied in steam, gas, and cooling water systems. • Water and Wastewater Treatment: Durable and cost-effective for fluid transport. • Structural and General Engineering: Commonly used in infrastructure, HVAC, and mechanical systems. Key Features: • Manufactured to DIN 2565 standard with PN 6 pressure rating • High mechanical strength with good ductility and toughness • Economical option for general-purpose piping systems • Easily machinable, weldable (if needed), and suitable for coatings • Delivered with test certificates, inspection reports, and material traceability Conclusion: DIN 2565 carbon steel flanges from Ladhani Metal Corporation offer dependable performance and excellent value across a wide range of applications. Known for their strength, versatility, and cost-effectiveness, these flanges are engineered to meet demanding project requirements. With strict quality control and precision manufacturing, our carbon steel flanges deliver consistent results for industrial and commercial systems. For specifications, custom requests, or bulk orders, get in touch with Ladhani Metal Corporation today.

DIN 2527 blind flanges are sealing components used in piping systems to close the ends of pipes, valves, or pressure vessels where no further connection is required. These flanges are designed to prevent the flow of fluids or gases, isolate sections of the piping system for maintenance, or facilitate pressure testing of the system. The DIN 2527 standard ensures these flanges meet specific dimensional and mechanical properties for reliable performance in various industrial applications. material type : Titanium: Titanium flanges, including Grade 2 and Grade 5, are known for their exceptional resistance to corrosion, particularly in aggressive environments like seawater and chemicals. These lightweight and strong materials are commonly used in aerospace, marine, and chemical industries. Stainless Steel (SS): Stainless steel, including grades like 304 and 316, provides excellent corrosion resistance, particularly in harsh environments. It is used in industries like chemical processing and marine applications, where resistance to corrosion and oxidation is essential. Carbon Steel (C.S.): Carbon steel is a popular choice for DIN 2527 blind flanges due to its strength, weldability, and cost-effectiveness. It is ideal for general-purpose applications in systems with moderate temperature and pressure conditions, using grades like St 37 and A105. Mild Steel (MS): Mild steel is a low-carbon steel that offers good formability and strength, making it suitable for less demanding applications. It is commonly used in systems where high pressure or corrosion resistance is not a critical concern. Alloy Steel: Alloy steel flanges, such as A182 F11 and A182 F22, are designed for high-temperature and high-pressure applications. They offer greater strength, thermal expansion resistance, and durability, making them ideal for power generation and petrochemical industries. Inconel: Inconel flanges, including Inconel 600 and 625, are ideal for extreme high-temperature and aggressive environments. These alloys provide superior strength and exceptional resistance to oxidation and corrosion, making them suitable for high-performance applications. SS Duplex Steel: Duplex steel, such as grade 2205, combines the characteristics of both austenitic and ferritic steels, offering high strength and superior resistance to corrosion. It is ideal for use in chemical and marine environments where stress corrosion cracking resistance is crucial. SS Super Duplex Steel: Super duplex steel, such as 2507, provides a combination of high strength and excellent corrosion resistance, especially in harsh environments. It is highly resistant to pitting and stress corrosion cracking, making it ideal for demanding applications in the oil, gas, and marine industries. Key Features of DIN 2527 Blind Flanges: Material Variety: DIN 2527 blind flanges are available in different materials, including carbon steel, mild steel, stainless steel, alloy steel, and special alloys like Inconel or Duplex steel, offering a wide range of options to meet the needs of different environments, temperatures, and pressures. Pressure and Temperature Ratings: These flanges are available in different pressure ratings such as PN6, PN10, PN16, PN25, and PN40, ensuring they can withstand the required pressures for various industrial applications. Dimensional Standards: The DIN 2527 standard ensures precise dimensional accuracy, allowing for reliable sealing and easy installation in piping systems. These flanges are available in various nominal diameters, typically ranging from DN10 (1/2 inch) to DN600 (24 inches) or more, depending on the system requirements.

Titanium pipe fittings, including tees, elbows, and reducers, are essential components in the construction and maintenance of piping systems. Known for their superior strength, corrosion resistance, and lightweight properties, titanium fittings are ideal for industries such as aerospace, chemical processing, marine, and power generation. Titanium Tee Fittings Titanium tees are used to connect three sections of piping in a T-shaped configuration. This fitting allows for the branching of pipelines in a single direction, offering excellent durability and resistance to harsh environments. With titanium’s high strength-to-weight ratio and resistance to corrosion, these tees ensure reliable flow management in challenging applications. Titanium Elbow Fittings Titanium elbows are used to change the direction of fluid flow in a piping system. These fittings come in various angles, including 45°, 90°, and 180°, providing flexibility in routing pipes around obstacles or to specific angles. The lightweight nature of titanium and its high resistance to oxidation and chemical degradation make titanium elbows an optimal choice for systems that operate in high-pressure and corrosive environments. Titanium Reducer Fittings Titanium reducers are designed to connect pipes of different diameters, reducing or increasing the flow capacity between sections. Available in concentric or eccentric designs, titanium reducers help in optimizing flow rates while maintaining system integrity. The corrosion-resistant properties of titanium ensure that these reducers maintain their performance even in extreme temperature and pressure conditions. Advantages of Titanium Pipe Fittings Corrosion Resistance: Titanium resists a wide range of aggressive chemicals and environmental conditions, including seawater, chlorine, and acidic or alkaline substances. High Strength-to-Weight Ratio: Titanium fittings offer exceptional strength while remaining lighter than many alternative materials, leading to easier handling and lower transportation costs. Durability: These fittings are designed for long-lasting performance, even in demanding conditions where other materials might fail. Biocompatibility: In industries such as medical and aerospace, titanium’s biocompatibility ensures it is safe for specialized applications. Titanium pipe fittings – tee, elbow, and reducer – provide a combination of strength, flexibility, and durability that enhances the performance of your piping systems.