Half Round Tube Shield Ladhani Metal Corporation manufactures SS 430 Half Round Straight Tube Shields to provide cost-effective protection for straight boiler and heat exchanger tubes in mildly corrosive and oxidizing environments. SS 430 is a ferritic stainless steel known for its good resistance to oxidation, thermal fatigue, and moderate corrosion in non-aggressive media. These shields are ideal for shielding tubes exposed to dry flue gases, ash, and scale buildup. SS 430 Half Round Straight Tube Shield The SS 430 Half Round Straight Tube Shield is designed to fit snugly over the exterior surface of straight tubes, forming a physical barrier that resists thermal cycling, soot-blowing erosion, and mechanical wear. With its high chromium content, SS 430 provides enhanced resistance to scaling at elevated temperatures. It is commonly used in power plants, economizers, WHRBs, and industrial boilers where consistent performance and affordability are important. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of SS 430 Half Round Straight Tube Shields, offering practical shielding solutions to extend the life of tubes in thermal and process equipment. Material Grade SS 430 – Ferritic stainless steel with good oxidation resistance and moderate corrosion protection in non-chloride environments. Chemical Composition of SS 430 • Carbon (C): ≤ 0.12% • Manganese (Mn): ≤ 1.00% • Phosphorus (P): ≤ 0.040% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 16.0 – 18.0% • Iron (Fe): Balance Applications: Suitable for dry, clean flue gas zones and mildly corrosive environments with minimal exposure to chlorides or strong acids. Uses • Straight tube shielding in boiler flue gas paths • Protection in economizers and preheater sections • Used in WHRBs for dry particulate erosion prevention • Ideal for food, paper, and textile industries with clean gas flow • Applied in low-to-moderate temperature furnace and duct systems Features • Good oxidation resistance – Performs well in clean, dry heat environments • Cost-efficient – Affordable solution for basic erosion protection • Magnetic ferritic grade – Offers dimensional stability under temperature cycling • Resistant to scaling – Up to ~815°C in intermittent service • Customizable – Lengths, radius, and thickness tailored to project needs • Easy attachment – Suitable for weld-on, clamp-on, or banded installation Applications • thermal boilers – Low-cost shielding for tubes in flue passages • process heat exchangers – Protects tubes in moderately aggressive environments • industrial dryers and ovens – Used in clean-air heating systems • WHRBs – Economical shield in clean-burning furnaces • general steam systems – Prevents tube wear and extends service life Conclusion SS 430 Half Round Straight Tube Shields by Ladhani Metal Corporation are a durable and economical choice for protecting straight tubes from heat, scale, and dry flue gas abrasion. With its balance of thermal resistance and cost-effectiveness, it serves reliably across a wide range of industrial systems. For custom configurations and bulk orders, contact Ladhani Metal Corporation.

Half Round Tube Shield Ladhani Metal Corporation manufactures SS 316 Half Round Straight Tube Shields to offer superior protection for straight tubes in boilers, heat exchangers, and steam systems. Fabricated using molybdenum-bearing austenitic stainless steel, SS 316 provides enhanced resistance to pitting, crevice corrosion, and elevated temperature scaling. These shields are ideal for use in aggressive chemical and marine environments, as well as in high-moisture flue gas areas of power and process boilers. SS 316 Half Round Straight Tube Shield The SS 316 Half Round Straight Tube Shield is designed to safeguard the surface of straight tube sections from erosive flue gas, thermal cycling, and chemical corrosion. Its excellent resistance to chloride-induced attack makes it suitable for areas with seawater exposure, acidic gases, or high humidity. These shields are widely installed in power plants, waste heat recovery units, and process steam equipment where corrosion control is critical to extending tube life and maintaining system efficiency. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of SS 316 Half Round Straight Tube Shields, delivering high-performance thermal protection solutions for demanding industrial applications. Material Grade SS 316 – Molybdenum-enhanced austenitic stainless steel with excellent corrosion resistance and thermal strength. Chemical Composition of SS 316 • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 16.0 – 18.0% • Nickel (Ni): 10.0 – 14.0% • Molybdenum (Mo): 2.0 – 3.0% • Iron (Fe): Balance Applications: Effective in corrosive and wet flue gas environments; ideal for marine boilers, chemical process systems, and flue gas zones with chloride presence. Uses • Protection of straight tubes in superheaters and economizers • Installed in chemical process heat exchangers for corrosion control • Used in marine boilers with exposure to salt-laden air • Applied in biomass and waste-to-energy boilers handling corrosive fuels • Shielding of tubes in fertilizer and paper plants with acidic exhaust gases Features • Excellent corrosion resistance – Especially in chloride, acidic, and marine environments • Good scaling resistance – Performs well under high-temperature oxidative conditions • Durable and reliable – Maintains integrity during prolonged exposure to heat and corrosive elements • Easy to install – Available with weld-on, clamp-on, or strapped fixing options • Available in custom dimensions – Designed to match tube size, shape, and installation parameters • Prolongs tube life – Reduces need for frequent replacement and minimizes unplanned shutdowns Applications • thermal power plants – Protects straight boiler tubes against high-temperature corrosion • marine and offshore systems – Withstands saline and humid atmospheres • waste heat recovery – Shields tubes in exhaust zones from ash and corrosive gases • petrochemical and fertilizer industries – Applied to extend the lifespan of steam and heat exchanger tubing • pulp and paper plants – Protects against acidic process byproducts in recovery boilers Conclusion The SS 316 Half Round Straight Tube Shield from Ladhani Metal Corporation is engineered to deliver long-lasting protection in corrosive, high-heat, and moisture-prone environments. Its molybdenum-rich composition provides exceptional defense against chloride corrosion and thermal degradation, making it an essential component for boiler tube maintenance and longevity. For custom sizes, detailed specifications, or bulk orders, contact Ladhani Metal Corporation. #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Salem #Erode #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Hassan #Cuttack #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Gaya #Muzaffarpur #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies

Half Round Tube Shield Half Round Tube Shields from Ladhani Metal Corporation are durable, precisely fabricated components used to protect boiler tubes from erosion, scaling, and corrosion caused by flue gas flow and particulate impact. Their half-round, semi-cylindrical structure is designed to conform closely to tube surfaces, especially in areas subjected to repeated thermal cycling or mechanical wear. These shields are extensively applied in boilers, heat exchangers, and waste heat recovery systems. 1Cr25Ni20Si2 Half Round Tube Shield for LTSH Tube The 1Cr25Ni20Si2 Half Round Tube Shield is manufactured from a high-performance chromium-nickel-silicon alloy designed for elevated-temperature service. With approximately 25% chromium, 20% nickel, and added silicon content, this alloy exhibits superior resistance to oxidation, thermal fatigue, and carburization. Its mechanical stability under high-temperature operation makes it a preferred material for protective applications in Low Temperature Superheater (LTSH) zones. The Low Temperature Superheater (LTSH) is a section in a boiler where saturated steam from the steam drum is superheated to a moderately higher temperature before entering the high-temperature superheater stages. Positioned in areas with relatively lower flue gas temperatures, the LTSH helps improve thermal efficiency and reduces moisture content in steam. Due to constant exposure to abrasive flue gases and ash, LTSH tubes are prone to wear and require protective shielding, such as half round tube shields, to extend service life. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of 1Cr25Ni20Si2 Half Round Tube Shields, offering high-performance shielding solutions tailored for harsh, heat-intensive industrial environments. Chemical Composition of 1Cr25Ni20Si2 – Chromium-Nickel-Silicon Heat-Resistant Steel • Carbon (C): ≤ 0.10% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.030% • Silicon (Si): 1.5 – 2.5% • Chromium (Cr): 24.0 – 27.0% • Nickel (Ni): 19.0 – 22.0% • Iron (Fe): Balance Applications: Suitable for high-temperature steam systems, where resistance to flue gas corrosion, thermal oxidation, and mechanical fatigue is essential. Uses • Protects LTSH tubes in thermal power plants from scaling and soot-induced wear • Shields heat exchanger tubes from low-temperature corrosive gases and ash deposition • Used in boilers and HRSGs exposed to fluctuating temperature and combustion by-products • Suitable for high-wear areas in biomass boilers and incineration systems • Enhances operational life of reheater and superheater coil sections Features • High thermal stability – Withstands temperature fluctuations without structural deformation • Excellent oxidation and carburization resistance – Ideal for extended high-temperature exposure • Custom fit – Designed according to specific tube radii and coil geometries for accurate alignment • Reduced maintenance – Shields tubes from damage, minimizing downtime and repair costs • Versatile installation – Compatible with weld-on, clamp-on, and banding installation techniques • Long service life – Resistant to scaling and degradation in heat-intensive environments Applications • power generation boilers – Provides long-term protection for LTSH coils in flue gas zones • WHRBs and HRSGs – Used in low-temperature convection sections to counteract erosive gas flow • chemical and refining industries – Prevents corrosion in heat exchangers handling acidic media • marine steam systems – Protects low-temperature sections exposed to salt-laden air and gases • waste-to-energy plants – Shields boiler tubing from high-volume particulate streams Conclusion The 1Cr25Ni20Si2 Half Round Tube Shield for LTSH Tube by Ladhani Metal Corporation – manufacturer, supplier, and exporter – is a high-performance component designed for superior protection of boiler tubes in corrosive and thermally aggressive environments. It ensures durability, thermal resistance, and long-term reliability in LTSH and similar service applications. For specifications, custom fabrication, or bulk orders, contact Ladhani Metal Corporation.

DIN 2569 Monel Flanges PN 100 are precision-engineered welding neck flanges manufactured from high-grade Monel alloys, specifically designed for high-pressure and highly corrosive environments. Built to DIN 2569 standards, these flanges offer excellent resistance to seawater, acids, and alkalis, along with superior mechanical strength and durability. Their robust performance makes them ideal for critical applications in marine engineering, chemical processing, oil and gas, and offshore industries. Ladhani Metal Corporation is a leading manufacturer and exporter of Monel flanges, offering reliable and high-quality products that meet stringent international standards. The welding neck configuration ensures permanent, high-strength connections suitable for continuous operation under high pressure and temperature conditions. Pressure Rating: • PN 100 (100 bar / 1450 psi): Specifically designed for high-pressure systems requiring outstanding corrosion resistance, sealing integrity, and mechanical performance in aggressive and demanding environments. Flange Types: • Welding Neck Flanges Provide high-strength welded connections for pressurized piping systems exposed to thermal expansion and vibration. • Raised Face (RF) Flanges Enhance gasket compression and sealing performance in high-pressure and temperature applications. • Flat Face (FF) Flanges Used in applications with flat mating surfaces, particularly when connecting to brittle or non-metallic materials. • Forged Welding Neck Flanges Offer high mechanical strength, dimensional accuracy, and durability. • Custom-Machined Flanges Available in various sizes, pressure classes, and Monel grades as per customer requirements. Monel Grades and Composition: 1. Monel 400 (Nickel-Copper Alloy) Composition: • Nickel (Ni): ≥ 63.0% • Copper (Cu): 28.0 – 34.0% • Iron (Fe): ≤ 2.5% • Manganese (Mn): ≤ 2.0% • Silicon (Si): ≤ 0.5% • Carbon (C): ≤ 0.30% Applications: Used in marine engineering, chemical processing, and fuel or freshwater tanks due to its excellent resistance to seawater, hydrofluoric acid, and stress corrosion cracking. 2. Monel K500 (Precipitation-Hardened Alloy) Composition: • Nickel (Ni): ≥ 63.0% • Copper (Cu): 27.0 – 33.0% • Aluminum (Al): 2.3 – 3.15% • Titanium (Ti): 0.35 – 0.85% Applications: Ideal for applications requiring high strength and corrosion resistance, such as pump shafts, oil well tools, and marine components. K500 offers greater mechanical strength and hardness compared to Monel 400. Applications of DIN 2569 Monel Flanges: • Marine and Offshore Engineering: Perfect for underwater, saltwater, and coastal applications due to excellent seawater and corrosion resistance. • Chemical and Petrochemical Industries: Used in acid and alkali handling systems, heat exchangers, and reactors where corrosion resistance is crucial. • Oil and Gas Sector: Employed in valves, pipes, and flanges exposed to sour gas and offshore drilling conditions. • Power Generation: Suitable for condenser tubing and heat exchangers in environments where both corrosion and high temperature are factors. • Aerospace and Defense: Used in high-performance components requiring durability, resistance to aggressive chemicals, and thermal stability. Key Features: • Manufactured to DIN 2569 standard • Available in PN 100 pressure rating • Excellent corrosion resistance in acidic and marine environments • High mechanical strength and thermal stability • Permanent welded neck design for secure pipe integration • Supplied with test certifications and complete traceability • Custom machining and finishing available including pickling and passivation Conclusion: DIN 2569 Monel Flanges PN 100 from Ladhani Metal Corporation are engineered for critical operations that demand corrosion resistance, strength, and durability under pressure. These flanges are trusted in marine, chemical, and energy sectors, delivering dependable service in the most challenging environments. For tailored specifications, material consultations, or bulk orders, reach out to Ladhani Metal Corporation today.

DIN 2567 titanium flanges are precision-engineered threaded flanges designed for high-performance, medium-to-high-pressure piping systems. Manufactured according to the DIN 2567 standard, these flanges offer exceptional resistance to corrosion, extreme temperatures, and aggressive media. The threaded design allows for easy, weld-free installation, making them ideal for applications where frequent maintenance or system modifications are required. Ladhani Metal Corporation is a leading manufacturer and exporter of titanium flanges, supplying durable and high-quality components for industries that demand superior corrosion resistance and mechanical strength. DIN 2567 titanium flanges are widely used in marine, chemical, aerospace, and water treatment systems. Pressure Ratings: • PN 25 (25 bar / 362 psi): Suitable for moderate to high-pressure systems handling corrosive fluids or gases. Ideal for chemical, marine, and water treatment applications. • PN 40 (40 bar / 580 psi): Designed for high-pressure, high-performance environments requiring maximum reliability and resistance to mechanical stress. Commonly used in offshore, aerospace, and power generation systems. Flange Types: • Threaded (Screwed) Flanges Quick and convenient for non-welded, removable connections in high-purity or corrosive systems. • Raised Face (RF) Flanges Designed to enhance sealing efficiency by focusing compression on the gasket area. • Flat Face (FF) Flanges Ideal for use with non-metallic or brittle mating materials in low-to-medium pressure environments. • Forged Threaded Flanges Provide enhanced mechanical integrity, dimensional precision, and impact resistance. • Custom-Machined Flanges Available in customer-specified sizes, pressure ratings (PN 25, PN 40), and titanium grades. Titanium Grades and Composition: Grade 2 (Commercially Pure Titanium) Composition: Titanium (Ti): ≥ 98.9% Iron (Fe): ≤ 0.30% Oxygen (O): ≤ 0.25% Carbon (C): ≤ 0.08% Nitrogen (N): ≤ 0.03% Hydrogen (H): ≤ 0.015% Grade 5 (Titanium Alloy – Ti-6Al-4V) Composition: Titanium (Ti): Balance Aluminum (Al): 5.5 – 6.75% Vanadium (V): 3.5 – 4.5% Iron (Fe): ≤ 0.40% Oxygen (O): ≤ 0.20% Carbon (C): ≤ 0.08% Nitrogen (N): ≤ 0.05% Hydrogen (H): ≤ 0.015% Applications of DIN 2567 Titanium Flanges: • Chemical Processing: Resists corrosion from strong acids, solvents, and chlorides • Marine and Offshore Engineering: Performs reliably in saltwater environments and subsea installations • Aerospace and Defense: Used in lightweight, high-strength fuel and hydraulic systems • Power Generation: Handles steam and chemical media in nuclear and thermal power plants • Water & Wastewater Treatment: Ideal for high-purity systems, brine lines, and filtration units • Medical and Pharmaceutical: Suitable for bio-compatible and sterile fluid transport systems Key Features: • Manufactured to DIN 2567 standard • Available in PN 25 and PN 40 pressure ratings • Superior resistance to corrosion, erosion, and chemical attack • Lightweight structure with high tensile strength • Easy installation with threaded connections—no welding required • Suitable for both cryogenic and elevated temperature conditions Conclusion: DIN 2567 titanium flanges PN 25 and PN 40 from Ladhani Metal Corporation are the ideal choice for demanding, corrosion-sensitive environments. Combining strength, lightweight construction, and superior corrosion resistance, these flanges deliver long-lasting performance in critical applications across various industries. For detailed specifications, custom designs, or bulk orders, contact Ladhani Metal Corporation today.

DIN 2566 duplex flanges PN 16 are high-performance, corrosion-resistant flanges designed for medium-pressure threaded piping systems. Manufactured in compliance with DIN 2566 standards, these flanges provide a reliable, non-welded connection ideal for environments where both strength and corrosion resistance are critical. Ladhani Metal Corporation is a manufacturer and exporter of duplex stainless steel flanges, offering precise machining, dimensional accuracy, and material traceability. With excellent mechanical properties and enhanced resistance to stress corrosion cracking and pitting, DIN 2566 duplex flanges are suitable for demanding applications across the oil & gas, petrochemical, marine, and power generation industries. Flange Types: • Threaded (Screwed) Flanges: Enable easy assembly and disassembly without welding, ideal for maintenance-intensive or temporary systems. • Raised Face (RF) Flanges: Improve gasket sealing by focusing pressure on a smaller surface area, reducing the risk of leakage. • Flat Face (FF) Flanges: Used with equipment having flat sealing surfaces, especially in systems using cast or non-metallic components. • Forged Threaded Flanges: Offer superior strength and impact resistance with consistent dimensional tolerance. • Custom-Machined Flanges: Tailored to meet specific application needs including pressure class, material grade, and sizing. Available Duplex Grades and Composition: 1. Duplex 2205 (UNS S31803 / S32205) • Chromium (Cr): 21.0 – 23.0% • Nickel (Ni): 4.5 – 6.5% • Molybdenum (Mo): 2.5 – 3.5% • Nitrogen (N): 0.14 – 0.20% • Carbon (C): ≤ 0.030% • Manganese (Mn): ≤ 2.0% • Silicon (Si): ≤ 1.0% Applications: Used in environments with chloride exposure and aggressive chemical media, such as offshore platforms, desalination plants, pressure vessels, and structural piping systems. Applications of DIN 2566 Duplex Flanges: • Oil & Gas Pipelines: Resistant to sour service and high-pressure fluids • Chemical and Petrochemical Plants: Withstands corrosive chemicals and process fluids • Marine and Offshore Engineering: Ideal for seawater and salt-laden atmospheres • Power Plants: Used in high-temperature and high-pressure piping systems • Water Treatment and Desalination: Corrosion-free in brine and chlorinated water systems Key Features: • Manufactured to DIN 2566 standard with PN 16 pressure rating • Excellent corrosion and stress corrosion cracking resistance • High strength and toughness, even at low temperatures • Maintenance-friendly threaded design • Dimensional precision and smooth finish for leak-free operation • Supplied with test certificates, inspection reports, and full traceability Conclusion: DIN 2566 duplex flanges PN 16 from Ladhani Metal Corporation are engineered to deliver a perfect balance of strength and corrosion resistance in medium-pressure piping applications. Designed for long-term durability in harsh environments, these flanges offer dependable performance with minimal maintenance. For technical assistance, custom dimensions, or bulk orders, get in touch with Ladhani Metal Corporation today.

DIN 2566 titanium flanges PN 16 are precision-engineered components designed for corrosion-resistant, medium-pressure piping systems that require non-welded, threaded connections. These flanges are manufactured as per DIN 2566 standards and are ideal for installations where reliability, lightweight strength, and resistance to aggressive media are essential. Ladhani Metal Corporation is a trusted manufacturer and exporter of high-performance titanium flanges, offering consistent quality, dimensional accuracy, and material traceability. With extensive industry experience and in-house machining capabilities, the company delivers tailored flange solutions for critical applications across marine, chemical, aerospace, and medical sectors. Flange Types: • Threaded (Screwed) Flanges: Enable quick installation and removal without welding, suitable for systems requiring periodic maintenance. • Raised Face (RF) Flanges: Improve sealing effectiveness by concentrating pressure on the gasket contact area, minimizing potential leakage. • Flat Face (FF) Flanges: Used with flat-faced components or equipment, often in low-pressure or non-metallic piping systems. • Forged Threaded Flanges: Offer enhanced mechanical strength and dimensional precision due to the forging process. • Custom-Machined Flanges: Manufactured to meet specific customer requirements in terms of dimensions, grades, and pressure ratings. Available Titanium Grades and Composition: 1. Grade 2 (Commercially Pure Titanium) • Titanium (Ti): ≥ 98.9% • Iron (Fe): ≤ 0.30% • Oxygen (O): ≤ 0.25% • Carbon (C): ≤ 0.08% • Nitrogen (N): ≤ 0.03% • Hydrogen (H): ≤ 0.015% Applications: Used in chemical processing, desalination systems, marine components, and medical devices due to its corrosion resistance and biocompatibility. 2. Grade 5 (Ti-6Al-4V) • Titanium (Ti): Balance • Aluminum (Al): 5.5 – 6.75% • Vanadium (V): 3.5 – 4.5% • Iron (Fe): ≤ 0.40% • Oxygen (O): ≤ 0.20% Applications: Preferred in aerospace, offshore, and high-pressure systems where both strength and corrosion resistance are critical. Applications of DIN 2566 Titanium Flanges: • Chemical Processing Plants: Resistant to acids, alkalis, and aggressive chemical media • Desalination and Water Treatment: Long-lasting in brine and seawater exposure • Marine and Offshore Engineering: Excellent in saltwater environments and pressure systems • Aerospace and Defense: Lightweight with high strength for fuel, hydraulic, and structural systems • Medical and Pharmaceutical: Biocompatible and corrosion-free for sterile process systems Key Features: • Manufactured to DIN 2566 standard with PN 16 pressure rating • Exceptional resistance to corrosion, erosion, and pitting • High strength-to-weight ratio and excellent fatigue performance • Threaded design allows non-welded, maintenance-friendly installation • Precision machining ensures a tight fit and reliable sealing • Supplied with complete test reports and full material traceability Conclusion: DIN 2566 titanium flanges PN 16 from Ladhani Metal Corporation offer unmatched performance in environments where corrosion resistance, weight savings, and long-term reliability are non-negotiable. With precision manufacturing, quality assurance, and customizable options, these flanges are the preferred choice for demanding industrial applications. For detailed specifications, custom requests, or bulk orders, contact Ladhani Metal Corporation today.

Ladhani Metal Corporation is a leading manufacturer and exporter of DIN 2565 carbon steel flanges, designed to provide strong, reliable, and cost-effective connections in low-pressure piping systems. Manufactured in accordance with DIN 2565 standards and available in PN 6 pressure rating, these threaded flanges are ideal for non-welded piping setups, especially in maintenance-friendly or temporary installations. Carbon steel flanges offer a combination of durability, toughness, and affordability. Their versatility makes them a widely preferred choice across industries such as oil and gas, construction, power generation, water treatment, and general engineering applications. Flange Types: • Threaded (Screwed) Flanges: Designed for quick assembly without welding, ideal for applications requiring frequent dismantling or modifications. • Raised Face (RF) Flanges: Helps create a tighter seal by concentrating pressure on the gasket, minimizing leakage. • Flat Face (FF) Flanges: Commonly used with cast iron or non-metallic components in low-pressure pipelines. • Forged Threaded Flanges: Forged for superior strength, impact resistance, and dimensional accuracy. • Custom-Machined Flanges: Tailored to meet specific customer requirements in terms of pressure class, dimensions, or material properties. Available Carbon Steel Grades and Composition: 1. ASTM A105 (Forged Carbon Steel) o Carbon (C): ≤ 0.35% o Manganese (Mn): 0.60 – 1.05% o Phosphorus (P): ≤ 0.035% o Sulfur (S): ≤ 0.040% o Silicon (Si): 0.10 – 0.35% Applications: Widely used in pressure systems at ambient and higher temperatures. Suitable for oil & gas pipelines, valves, and pressure vessels. 2. ASTM A350 LF2 (Low Temperature Carbon Steel) o Designed for low-temperature service with added toughness and impact resistance. Applications: Used in cryogenic and sub-zero temperature systems, such as gas processing and cold storage piping. Applications of DIN 2565 Carbon Steel Flanges: • Oil & Gas Industry: Used in pipelines, valve connections, and flow systems. • Petrochemical and Refineries: Suitable for systems transporting hydrocarbons and chemicals. • Power Plants: Applied in steam, gas, and cooling water systems. • Water and Wastewater Treatment: Durable and cost-effective for fluid transport. • Structural and General Engineering: Commonly used in infrastructure, HVAC, and mechanical systems. Key Features: • Manufactured to DIN 2565 standard with PN 6 pressure rating • High mechanical strength with good ductility and toughness • Economical option for general-purpose piping systems • Easily machinable, weldable (if needed), and suitable for coatings • Delivered with test certificates, inspection reports, and material traceability Conclusion: DIN 2565 carbon steel flanges from Ladhani Metal Corporation offer dependable performance and excellent value across a wide range of applications. Known for their strength, versatility, and cost-effectiveness, these flanges are engineered to meet demanding project requirements. With strict quality control and precision manufacturing, our carbon steel flanges deliver consistent results for industrial and commercial systems. For specifications, custom requests, or bulk orders, get in touch with Ladhani Metal Corporation today.

Ladhani Metal Corporation offers 1Cr25Ni20Si2 Boiler Half Round Tube Shields engineered for superior protection of boiler tubes in extremely high-temperature and abrasive service environments. Manufactured from a heat-resistant austenitic stainless steel alloy with high chromium, nickel, and silicon content, 1Cr25Ni20Si2 delivers exceptional resistance to oxidation, carburization, and high-temperature scaling. The added silicon improves anti-oxidation properties and enhances structural stability during prolonged thermal exposure. These shields are precision-formed into a half-round profile to ensure accurate coverage of straight boiler tube sections. They provide a durable physical barrier against flue gas erosion, soot blower impact, and particle-laden gas flow, significantly extending the operational life of boiler tubes. Ladhani Metal Corporation manufactures, supplies, and exports 1Cr25Ni20Si2 Boiler Half Round Tube Shields in a wide range of sizes, thicknesses, and lengths, catering to both domestic and international markets. 1Cr25Ni20Si2 Grade Chemical Composition – Heat Resistant Austenitic Stainless Steel • Carbon (C): ≤ 0.12% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.030% • Silicon (Si): 1.50 – 2.50% • Chromium (Cr): 24.00 – 26.00% • Nickel (Ni): 19.00 – 22.00% • Iron (Fe): Balance Uses • Shields straight boiler tubes in superheaters, reheaters, and economizers • Protects against oxidation, scaling, and particulate erosion • Suitable for carburizing and high-silicon demanding environments • Extends tube life in power generation and process heating units Features • Enhanced oxidation resistance – Silicon addition boosts scale resistance at extreme temperatures • Superior thermal stability – Maintains mechanical integrity during prolonged heat exposure • Precision-engineered profile – Ensures a secure and accurate fit over boiler tubes • Flexible installation – Can be welded, clamped, or banded based on site requirements • Export-ready – Compliant with international quality and dimensional standards Applications • Thermal power stations – Protects superheater and reheater tubes from oxidation and erosion • Waste heat boilers – Guards tubes in severe heat recovery operations • Petrochemical and refinery heaters – Resists carburization in furnace conditions • Metallurgy and cement industries – Provides reliable tube protection under abrasive, high-heat gas flows Conclusion The 1Cr25Ni20Si2 Boiler Half Round Tube Shield from Ladhani Metal Corporation is designed for extreme service conditions where oxidation, scaling, and high-temperature wear are major concerns. With its silicon-enhanced heat-resistant alloy composition and precise manufacturing, it ensures prolonged boiler tube life and reduced downtime. Available in customized sizes for both domestic and export orders, these shields offer dependable performance in the world’s toughest boiler and furnace environments. For specifications and order inquiries, contact Ladhani Metal Corporation. #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Salem #Erode #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Hassan #Cuttack #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Gaya #Muzaffarpur#halftubeshield #utypehalftubeshield #tubeshieldexporter #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier #SSShielding #IndustrialTubeShield #BoilerTubeGuard #CustomMetalParts #SteelIndustryIndia #MetalEngineering #HeavyIndustrySupply #StainlessSteelIndia #SteelExporters #MetalComponentExport #FabricatedProducts #SteelDealer #IndustrialSupplyIndia #BoilerTubeFittings #TubeShieldingSolutions #HalfTubeCover #HeatExchangerShield