Half Round Tube Shield Ladhani Metal Corporation manufactures 1Cr13 Half Round Straight Tube Shields to protect boiler and heat exchanger tubes from erosion, corrosion, and high-temperature wear. 1Cr13 is a martensitic stainless steel containing approximately 13% chromium, offering moderate corrosion resistance and high strength at elevated temperatures. It is suitable for service in mildly corrosive environments and where mechanical stress and abrasive flue gas contact are prevalent. Ladhani Metal Corporation is a leading manufacturer, supplier, and exporter of 1Cr13 Half Round Straight Tube Shields, offering consistent quality and customized solutions for industrial thermal systems. Material Grade 1Cr13 – A martensitic stainless steel known for good mechanical strength and moderate corrosion resistance in dry, oxidizing conditions. Chemical Composition of 1Cr13 • Carbon (C): 0.15 – 0.20% • Silicon (Si): ≤ 0.60% • Manganese (Mn): ≤ 0.60% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.030% • Chromium (Cr): 12.0 – 14.0% • Iron (Fe): Balance Applications: Recommended for erosion protection in boiler systems operating in dry flue gas or mildly corrosive service environments. Uses • Straight tube protection in industrial and utility boilers • Economizer and preheater shielding in thermal plants • Flue gas path erosion prevention in WHRBs • Wear-resistant layer in ash-prone ducting systems • Protective shielding in steam air heaters and gas coolers Features • Moderate corrosion and oxidation resistance at elevated temperatures • Good hardness and wear resistance under mechanical stress • Cost-effective solution for general tube protection • Customizable size and thickness to suit specific tube geometries • Compatible with banded, clamped, or welded installation methods • Increases tube durability and reduces operational downtime Applications • power generation – Economizer, LTSH, and convection section tube protection • pulp and paper – Shielding of tubes exposed to process gases • cement industry – Protection in preheater and kiln gas areas • food and textile industries – Used in clean gas heating systems • general boilers – Applied in tube banks subject to gas erosion Conclusion 1Cr13 Half Round Straight Tube Shields from Ladhani Metal Corporation deliver reliable mechanical and thermal protection for tubes in industrial heat systems. Their strength and wear resistance make them a practical choice for reducing maintenance costs and prolonging tube service life. To request a quote or custom configuration, contact Ladhani Metal Corporation. #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier #SSShielding #IndustrialTubeShield #BoilerTubeGuard #CustomMetalParts #SteelIndustryIndia #MetalEngineering #HeavyIndustrySupply #StainlessSteelIndia #SteelExporters #MetalComponentExport #FabricatedProducts #SteelDealer #IndustrialSupplyIndia #BoilerTubeFittings #TubeShieldingSolutions #HalfTubeCover #HeatExchangerShield #halftubeshield #utypehalftubeshield #tubeshieldexporter #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Salem #Erode #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Hassan #Cuttack #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Gaya #Muzaffarpur

Half Round Tube Shield Ladhani Metal Corporation manufactures Cr25Ni20 Half Round Straight Tube Shields for use in high-temperature industrial environments where resistance to oxidation, carburization, and thermal fatigue is critical. Cr25Ni20 is a heat-resistant alloy with a high chromium (25%) and nickel (20%) content, offering excellent stability under prolonged exposure to high heat and corrosive flue gases. This alloy is widely used in boilers, reformers, waste heat recovery systems, and thermal process units. Cr25Ni20 Half Round Straight Tube Shield The Cr25Ni20 Half Round Straight Tube Shield is precisely shaped to fit the outer surface of straight heat exchanger or boiler tubes. It forms a durable, semi-cylindrical layer of protection against high-temperature scaling, tube thinning, and erosion caused by particulate-laden flue gas. The shield enhances tube longevity in radiation zones and areas prone to direct flame or high-velocity gas flow. Its excellent thermal shock resistance also makes it suitable for cyclic heating and cooling conditions. Ladhani Metal Corporation is a leading manufacturer, supplier, and exporter of Cr25Ni20 Half Round Straight Tube Shields, delivering robust thermal shielding solutions for critical tube protection. Material Grade Cr25Ni20 – High chromium-nickel heat-resistant alloy Chemical Composition of Cr25Ni20 • Carbon (C): ≤ 0.08% • Silicon (Si): ≤ 1.5% • Manganese (Mn): ≤ 2.0% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.030% • Chromium (Cr): 24.0 – 26.0% • Nickel (Ni): 19.0 – 22.0% • Iron (Fe): Balance Uses • Protection of boiler tubes in radiant and convection zones • Straight tube shielding in reformers and furnace outlets • High-temperature air and gas heater shielding • Application in coal gasification and petrochemical furnaces • Tube erosion prevention in thermal incineration units Features • Excellent high-temperature performance – Operates reliably above 1000°C • Resistant to oxidation and scale – Maintains surface integrity in oxidizing environments • Superior creep strength – Suitable for long-term service under thermal stress • Effective in carburizing atmospheres – Ideal for furnaces and gas reactors • Thermal fatigue resistance – Withstands repeated heating and cooling cycles • Custom fabrication – Available in multiple lengths, thicknesses, and diameters Applications • power generation boilers – Radiant zone tube protection • thermal cracking units – Resistant to flame impingement and high gas velocity • waste heat recovery boilers – Prolongs tube life in high-ash flue gas areas • fertilizer plants – Used in ammonia reformer tube protection • metallurgical furnaces – Shields exposed tubes in extreme temperature cycles Conclusion Cr25Ni20 Half Round Straight Tube Shields from Ladhani Metal Corporation offer outstanding durability and heat resistance, making them ideal for straight tubes operating in the most demanding high-temperature applications. Their high chromium and nickel content ensures reliable service where oxidation, erosion, and thermal cycling are a concern. For custom sizes, specifications, or technical consultations, contact Ladhani Metal Corporation. #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Salem #Erode #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Hassan #Cuttack #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Gaya #Muzaffarpur #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier #SSShielding #IndustrialTubeShield #BoilerTubeGuard #CustomMetalParts #SteelIndustryIndia #MetalEngineering #HeavyIndustrySupply #StainlessSteelIndia #SteelExporters #MetalComponentExport #FabricatedProducts #SteelDealer #IndustrialSupplyIndia #BoilerTubeFittings #TubeShieldingSolutions #HalfTubeCover #HeatExchangerShield #halftubeshield #utypehalftubeshield

Half Round Tube Shield Ladhani Metal Corporation manufactures SS 430 Half Round Straight Tube Shields to provide cost-effective protection for straight boiler and heat exchanger tubes in mildly corrosive and oxidizing environments. SS 430 is a ferritic stainless steel known for its good resistance to oxidation, thermal fatigue, and moderate corrosion in non-aggressive media. These shields are ideal for shielding tubes exposed to dry flue gases, ash, and scale buildup. SS 430 Half Round Straight Tube Shield The SS 430 Half Round Straight Tube Shield is designed to fit snugly over the exterior surface of straight tubes, forming a physical barrier that resists thermal cycling, soot-blowing erosion, and mechanical wear. With its high chromium content, SS 430 provides enhanced resistance to scaling at elevated temperatures. It is commonly used in power plants, economizers, WHRBs, and industrial boilers where consistent performance and affordability are important. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of SS 430 Half Round Straight Tube Shields, offering practical shielding solutions to extend the life of tubes in thermal and process equipment. Material Grade SS 430 – Ferritic stainless steel with good oxidation resistance and moderate corrosion protection in non-chloride environments. Chemical Composition of SS 430 • Carbon (C): ≤ 0.12% • Manganese (Mn): ≤ 1.00% • Phosphorus (P): ≤ 0.040% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 16.0 – 18.0% • Iron (Fe): Balance Applications: Suitable for dry, clean flue gas zones and mildly corrosive environments with minimal exposure to chlorides or strong acids. Uses • Straight tube shielding in boiler flue gas paths • Protection in economizers and preheater sections • Used in WHRBs for dry particulate erosion prevention • Ideal for food, paper, and textile industries with clean gas flow • Applied in low-to-moderate temperature furnace and duct systems Features • Good oxidation resistance – Performs well in clean, dry heat environments • Cost-efficient – Affordable solution for basic erosion protection • Magnetic ferritic grade – Offers dimensional stability under temperature cycling • Resistant to scaling – Up to ~815°C in intermittent service • Customizable – Lengths, radius, and thickness tailored to project needs • Easy attachment – Suitable for weld-on, clamp-on, or banded installation Applications • thermal boilers – Low-cost shielding for tubes in flue passages • process heat exchangers – Protects tubes in moderately aggressive environments • industrial dryers and ovens – Used in clean-air heating systems • WHRBs – Economical shield in clean-burning furnaces • general steam systems – Prevents tube wear and extends service life Conclusion SS 430 Half Round Straight Tube Shields by Ladhani Metal Corporation are a durable and economical choice for protecting straight tubes from heat, scale, and dry flue gas abrasion. With its balance of thermal resistance and cost-effectiveness, it serves reliably across a wide range of industrial systems. For custom configurations and bulk orders, contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are precision-engineered components used to protect boiler and heat exchanger tubes from erosion, scaling, and high-temperature corrosion. These shields are widely applied in industrial systems exposed to thermal cycling, aggressive gases, and particulate flow. Their half-round shape allows for simple and secure installation over straight or curved tube surfaces, extending tube life and reducing maintenance needs. SS 420 U Type Half Round Tube Shield The SS 420 U Type Half Round Tube Shield is manufactured from hardenable martensitic stainless steel, providing robust mechanical strength, surface hardness, and oxidation resistance in high-temperature service environments. Designed specifically for U-bend sections in heat exchangers, boilers, and superheaters, this shield offers dependable protection against scaling, thermal fatigue, and particulate erosion. The U-type configuration enables targeted shielding of both the inner and outer arcs of tube bends—critical areas where temperature gradients and gas velocity are highest. • Outer U Type Half Round Tube Shield – Protects the outer curve of U-bends from slag accumulation, flame impingement, and surface wear caused by high-velocity gas flow. • Inner U Type Half Round Tube Shield – Shields the inner arc against turbulence-induced erosion, scaling, and corrosion under thermal stress conditions. Ladhani Metal Corporation supplies SS 420 U Type Half Round Tube Shields tailored to meet the demands of thermal power, petrochemical, and process industries operating in elevated temperature ranges with limited corrosive exposure. Chemical Composition of SS 420 – Hardenable Martensitic Stainless Steel • Carbon (C): 0.15 – 0.40% • Manganese (Mn): ≤ 1.00% • Phosphorus (P): ≤ 0.040% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 12.0 – 14.0% • Nickel (Ni): ≤ 0.75% • Iron (Fe): Balance Applications: Ideal for systems requiring wear resistance, oxidation stability, and mechanical strength in dry, heat-intensive environments. Uses • Protection of U-bend tubes in thermal power plant superheaters and reheaters • Coverage for curved tube sections in WHRBs and HRSGs exposed to abrasive gas flow • Shielding tube bends in chemical reactors and reformers where thermal shock and particulate wear are common • Erosion prevention in return bends of condensers, evaporators, and economizers • Suitable for heat exchanger systems with low moisture and minimal chemical corrosion Features • Excellent surface hardness – SS 420 can be heat-treated for increased hardness and wear resistance, making it suitable for erosive and abrasive service. • Good oxidation resistance – Performs effectively in dry air at elevated temperatures, helping prevent surface scaling and material degradation. • Full bend protection – Offered in both inner and outer U-type forms to ensure total shielding of critical tube bend areas. • Tight and secure fit – Engineered to match tube radius and diameter, ensuring vibration-free performance and minimal exposure. • Simple installation – Can be easily mounted using banding, clamping, or light tack welding without requiring full system shutdown. • Cost-effective solution – Provides a balance of performance and affordability for moderately aggressive service conditions. Applications • thermal and captive power plants – Used on U-bends in reheaters and superheaters to combat flue gas erosion and temperature cycling. Ensures better tube life and heat retention. • refinery and process industries – Suitable for return bends in units with dry, high-temperature gas flow and minimal moisture-induced corrosion. • waste heat recovery systems – Shields U-shaped tubes in WHRBs from slag, particulate impact, and scale buildup. • cement and glass industries – Installed on high-temperature tubes exposed to solid-laden gas streams for wear resistance and surface stability. • chemical plants – Applied in select heat exchanger areas where scaling and erosion are more critical than chemical corrosion. Conclusion The SS 420 U Type Half Round Tube Shield by Ladhani Metal Corporation offers a rugged and efficient solution for protecting U-bend tubes exposed to heat, slag, and abrasive gas flow. With its ability to resist scaling, erosion, and surface fatigue, SS 420 is ideal for industries operating in dry, high-temperature environments. Precision fit, dual-arc protection, and easy installation make these shields a valuable addition to any boiler or heat exchanger system. For technical consultation, custom orders, or quotations, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are precision-engineered protective components designed to safeguard boiler and heat exchanger tubes from thermal fatigue, oxidation, and mechanical erosion. These shields improve system reliability and extend tube service life in harsh industrial environments. The half-round form enables simple installation and effective protection of exposed tube surfaces. SS 310 U Type Half Round Tube Shield The SS 310 U Type Half Round Tube Shield is a high-temperature protective sleeve designed to cover U-bend and straight sections of tubes in boilers, superheaters, and heat exchangers. Made from stainless steel grade 310, it offers outstanding resistance to oxidation, carburization, and thermal stress at elevated temperatures. The U-type design ensures complete protection of return bends, where tube degradation is most common. Available in both inner and outer U configurations, these shields are custom-bent to match tube radius and diameter. • Outer U Type Half Round Tube Shield – Protects the external arc of the U-bend from radiant heat, slag buildup, and erosion. • Inner U Type Half Round Tube Shield – Shields the internal curve of the bend from gas turbulence, scaling, and corrosion. Ladhani Metal Corporation is a leading manufacturer and exporter of SS 310 U Type Half Round Tube Shields, offering durable and tailored solutions for global heat transfer systems. Chemical Composition of SS 310 – High Temperature Austenitic Stainless Steel • Carbon (C): ≤ 0.25% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.50% • Chromium (Cr): 24.0 – 26.0% • Nickel (Ni): 19.0 – 22.0% • Iron (Fe): Balance Applications: Preferred in high-temperature operations where oxidation resistance, heat stability, and carburization resistance are essential. Uses • U-bend protection in superheater and reheater coils • Shielding curved tubes in furnace coils and process heat exchangers • Prevention of high-temperature erosion in WHRB and HRSG systems • Surface protection in reformers and chemical reactors • Safeguarding heat transfer tubes in incinerators and kilns Features • Made from high-quality SS 310, the shield offers superior resistance to oxidation, scaling, and high-temperature corrosion, making it suitable for continuous exposure up to 1100°C. • The inner and outer U-type configurations provide complete protection for both sides of curved tube bends, ensuring uniform shielding in the most erosion-prone areas. • Precision-formed to match the tube’s bend radius and diameter, ensuring a tight, vibration-free fit that enhances durability and minimizes tube wall exposure. • Retains mechanical strength and dimensional stability under cyclic thermal loading, preventing deformation, cracking, or failure in high-heat environments. • Offered in various finishes such as pickled, passivated, or bright annealed to suit different service conditions and enhance surface corrosion resistance. • Easily installed using welding, clamping, or banding methods without requiring tube removal, enabling quick field installation and minimal system downtime. • Fully customizable in terms of thickness, length, and radius, allowing seamless integration with existing boiler, furnace, or heat exchanger systems. Applications • thermal power plants – Protects U-bend coils in superheaters and reheaters. Resists scale formation and creep at high flue gas temperatures. • petrochemical refineries – Shields curved exchanger tubes in reformers and heaters. Maintains integrity under carburizing and oxidizing atmospheres. • waste heat recovery systems (WHRBs) – Guards return bends against ash and slag attack. Enhances tube durability in high-flow, abrasive environments. • chemical and fertilizer plants – Used in U-tube reactors and ammonia converters. Prevents corrosion and surface damage under cyclic thermal loads. • HRSGs and boilers – Applied to curved tube sections in heat recovery units. Ensures stability under rapid heating and cooling cycles. Conclusion The SS 310 U Type Half Round Tube Shield by Ladhani Metal Corporation offers superior protection for curved tube sections operating in high-temperature and corrosive service conditions. Its exceptional resistance to oxidation and carburization makes it ideal for thermal, chemical, and energy-intensive industries. Manufactured with precision, these shields are available in custom sizes and finishes, ensuring a tight fit and long-term durability. For reliable and cost-effective tube protection, Ladhani Metal Corporation provides trusted solutions tailored to your operational demands. For design assistance, material selection, or quotation inquiries, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are precision-formed protective sleeves designed to guard heat exchanger and boiler tubes from high-temperature corrosion, erosion, and mechanical wear. These shields are used extensively across thermal power, petrochemical, and process industries to improve tube longevity and reduce maintenance costs. Their half-round design allows easy installation without dismantling the tube system. SS 304L U Type Half Round Tube Shield The SS 304L U Type Half Round Tube Shield is designed to protect both straight and curved (U-bend) tube sections in heat exchangers, superheaters, and boilers. Made from low-carbon stainless steel 304L, this shield provides excellent corrosion resistance and is particularly suitable for applications where post-weld heat treatment is not feasible. Its U-shaped profile ensures secure coverage of return bends, which are often the most vulnerable to thermal stress and flue gas attack. This shield is available in both inner and outer configurations to ensure full tube coverage. This shield is available in two key configurations to provide complete protection around the bend radius: • Outer U Type Half Round Tube Shield – Covers the external curvature of U-bend tubes exposed to radiant heat, slag, and gas flow. • Inner U Type Half Round Tube Shield – Protects the internal arc of bends from turbulence, scaling, and localized heat buildup. Ladhani Metal Corporation is a trusted manufacturer and exporter of SS 304L U Type Half Round Tube Shields, delivering durable and customized protection solutions for global industrial applications. Chemical Composition of SS 304L – Austenitic Stainless Steel • Carbon (C): ≤ 0.035% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 18.0 – 20.0% • Nickel (Ni): 8.0 – 12.0% • Iron (Fe): Balance Applications: Ideal for high-temperature and corrosive environments where low carbon content is preferred to minimize carbide precipitation during welding. Uses • U-bend tube shielding in superheaters and heat exchangers • Return bend protection in boilers and WHRBs • Shielding of curved coils in steam reforming and process plants • Corrosion prevention in waste-to-energy and flue gas-exposed systems • Surface protection in ammonia plants, HRSGs, and incinerators Features • corrosion resistant – SS 304L offers excellent resistance to oxidation, scaling, and chemical attack in high-temperature environments • low carbon content – minimizes risk of carbide precipitation during welding, improving post-weld corrosion resistance • precise fit – custom-formed to match U-bend radius for secure installation and effective shielding • high durability – retains mechanical strength under thermal cycling and flue gas exposure • easy installation – designed for quick on-site mounting via clamping, welding, or banding • versatile finish – available in pickled, passivated, or bright annealed surface treatments • customizable – produced in various lengths, thicknesses, and diameters as per customer requirements Applications • Thermal power plants – Protects U-bend tubes in superheaters, reheaters, and economizers. Prevents oxidation, scaling, and thermal damage from flue gases. • Petrochemical refineries – Shields curved furnace and exchanger tubes. Resists heat, carburizing gases, and corrosive media. • Waste heat recovery systems (WHRBs) – Guards return bends from ash erosion and gas turbulence. Enhances tube life in incinerators, engines, and kilns. • Chemical and fertilizer plants – Used on U-bends in reactors and reformers. Prevents stress corrosion and thermal fatigue. • HRSGs and boilers – Installed on return coils exposed to high-temperature flue gases. Ensures reliable operation under cyclic heating conditions. Conclusion The SS 304L U Type Half Round Tube Shield by Ladhani Metal Corporation provides comprehensive and long-lasting protection for U-bend tube sections operating in aggressive thermal and corrosive environments. Manufactured with high-precision forming and superior materials, these shields offer reliable coverage, excellent weldability, and extended service life. As a leading manufacturer and exporter, Ladhani Metal Corporation offers customized shielding solutions that match your project’s specifications and environmental demands. For detailed specifications, technical support, or to request a quotation, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are specially designed components used to protect boiler and heat exchanger tubes from erosion, wear, and high-temperature damage. Manufactured with precision and expertise, these shields enhance tube life, reduce maintenance requirements, and support efficient operation in high-performance industrial systems. The half-round design enables quick installation and provides effective coverage for vulnerable tube surfaces. SS 304 U Type Half Round Tube Shield The SS 304 U Type Half Round Tube Shield is a specially fabricated, semi-circular tube protection device designed to fit around both the curved (U-bend) and straight sections of heat exchanger and boiler tubes. Constructed from premium-grade stainless steel 304, it offers exceptional resistance to corrosion, oxidation, and mechanical wear. Its U-shaped configuration ensures continuous protection along the bend radius, where erosion, thermal stress, and ash impingement are most intense. This shield is available in both inner and outer configurations to ensure full tube coverage. • Outer U Type Half Round Tube Shield – Shields the external curve of U-bend tubes from flame impingement, heat radiation, and gas flow abrasion. • Inner U Type Half Round Tube Shield – Protects the internal arc of the U-bend from turbulence, corrosion, and localized thermal impact. Ladhani Metal Corporation is a leading manufacturer and exporter of SS 304 U Type Half Round Tube Shields, offering high-quality and custom-engineered solutions to meet the demanding requirements of global industries. Chemical Composition of SS 304 – Austenitic Stainless Steel • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 18.0 – 20.0% • Nickel (Ni): 8.0 – 10.5% • Iron (Fe): Balance Applications: Ideal for use in thermal power systems, steam generation units, and petrochemical processing where tube bends are subject to extreme heat, corrosion, or flow-related erosion. Uses • Protection of U-bend sections in superheaters, reheaters, and economizers • Shielding of return bends in heat exchangers exposed to flue gas or high-velocity media • Enhancement of tube durability in HRSG systems and boilers • Erosion prevention in waste heat recovery boilers and furnace zones • Corrosion mitigation in chemical process plant U-tube bundles Features • Material: Manufactured from high-grade SS 304 for superior heat and corrosion resistance • Configuration: Inner and outer U-type shields available for full bend coverage • Design: Formed precisely to match U-bend tube radius for secure, vibration-free fitment • Finish: Bright annealed, pickled, or passivated finishes available (custom finishes on request) • Durability: High mechanical strength and long service life under thermal cycling • Customization: Available in various lengths, thicknesses, and diameters as per project requirements • Easy Installation: Designed for clamping, welding, or banding with minimal tube interference Applications • Thermal power stations and utility boilers • Waste-to-energy systems and HRSGs • Petrochemical refineries and furnace systems • Chemical processing and ammonia plants • Steam-based heat recovery units • Pulp and paper mills with superheater tube networks Conclusion The SS 304 U Type Half Round Tube Shield by Ladhani Metal Corporation offers a reliable and efficient solution for protecting U-bend tube sections in demanding high-temperature and corrosive environments. As a trusted manufacturer and exporter, Ladhani Metal Corporation delivers products that combine durability, precision, and performance. Designed for longevity and ease of installation, these shields help extend tube life and reduce unplanned maintenance. Custom-built to your specifications, our tube shields are a dependable solution for critical tube protection. For technical specifications, customized sizes, or quotation requests, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are specially designed components used to protect boiler and heat exchanger tubes from erosion, wear, and high-temperature damage. Manufactured with precision and expertise, these shields ensure enhanced tube life, reduced maintenance, and efficient operation in demanding industrial environments. SS 304L Half Round Tube Shield The SS 304L Half Round Tube Shield is a semi-circular protective cover made from high-quality stainless steel grade 304L. It is widely used in thermal and mechanical systems where tube surfaces are exposed to harsh operating conditions. The lower carbon content in SS 304L offers enhanced weldability and minimizes the risk of carbide precipitation, making it ideal for high-temperature and corrosive environments. The half-round design allows for easy installation over tubes while ensuring robust protection from flue gases, abrasives, and thermal stress. Manufactured using stainless steel grade 304L, these half-round tube shields are semi-cylindrical covers that are clamped or welded over exposed tubes. The “L” in SS 304L denotes “Low Carbon,” which offers improved resistance to sensitization during welding or prolonged exposure to elevated temperatures, making it more suitable for high-temperature and corrosive conditions compared to standard SS 304. The shields are formed with precision to ensure a snug fit over tubes and provide maximum protection without disrupting heat transfer or fluid flow. Chemical Composition of SS 304L – Austenitic Stainless Steel • Carbon (C): ≤ 0.030% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 18.0 – 20.0% • Nickel (Ni): 8.0 – 12.0% • Iron (Fe): Balance Applications: Widely used in boilers, heat exchangers, steam lines, and furnaces due to its excellent corrosion resistance, weldability, and performance in high-temperature service conditions. Uses – SS 304L Half Round Tube Shield • Boiler Tube Protection – Used to safeguard boiler tubes from high-temperature flue gases, ash erosion, and abrasive particles, ensuring extended service life and reduced downtime. • Heat Exchanger Tube Shielding – Protects heat exchanger tubes from corrosive process fluids and turbulent flow, helping to maintain performance and reduce maintenance frequency. • Furnace Gas Flow Wear Prevention – Installed in furnace environments where high-velocity gases and thermal cycling can cause severe tube wear, acting as a durable barrier. • Petrochemical & Refinery Applications – Shields critical tubing in high-temperature and chemically aggressive environments, improving resistance to oxidation and corrosion. Applications – SS 304L Half Round Tube Shield • Thermal Power Stations – Ideal for boiler systems and superheater tubes exposed to extreme thermal and flow conditions. • Refineries & Petrochemical Plants – Used in cracking units, reformers, and reactors where temperature and corrosion challenges are common. • Heat Recovery Steam Generators (HRSGs) – Enhances protection of tubes in combined cycle power plants and improves system reliability. • Chemical Processing Units – Prevents corrosion and surface degradation in harsh chemical flow environments. • Pulp and Paper Industry – Protects process tubes in digesters, recovery boilers, and steam-generating systems. • Industrial Boilers and Steam Systems – Ensures long-lasting tube integrity in high-pressure and high-temperature steam applications. Benefits • Extended Tube Life: Reduces repair frequency and tube replacement cycles. • Cost Efficiency: Minimizes downtime and maintenance-related expenses. • Reliable Performance: Maintains mechanical integrity under fluctuating temperatures and pressure conditions. • Sustainability: Enhances energy efficiency by maintaining consistent heat transfer performance. Conclusion The SS 304L Half Round Tube Shield by Ladhani Metal Corporation is an ideal solution for protecting critical tube systems in aggressive and high-temperature environments. Designed for high performance and long-lasting reliability, these shields help extend the lifespan of tubing systems while reducing downtime and maintenance costs. With customizable options, premium materials, and expert fabrication, Ladhani Metal Corporation is your trusted partner in tube protection solutions. For more details, inquiries, or to request a quote, please contact Ladhani Metal Corporation.

Ladhani Metal Corporation offers SS 316 Half Round Tube Shields designed to provide robust protection for reheater (R/H) tubes in boilers, power plants, and industrial steam systems. Reheater tubes carry steam through the reheater section of the boiler, where the steam is reheated after partial expansion in the high-pressure turbine to enhance efficiency and reduce moisture formation. Manufactured from molybdenum-bearing austenitic stainless steel grade SS 316, these shields deliver superior resistance to pitting, crevice corrosion, and high-temperature oxidation, making them ideal for aggressive and chloride-containing environments. Function of R/H Tubes • Carry steam through the reheater section of the boiler • Exposed to very high temperatures (often > 540°C) and erosion from flue gases • Often protected with Half Round Tube Shields in high-velocity and abrasive gas flow zones Ladhani Metal Corporation manufactures, supplies, and exports SS 316 Half Round Tube Shields in various lengths, diameters, and thicknesses, meeting both domestic and international quality standards. SS 316 Grade Chemical Composition – Austenitic Stainless Steel • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 16.00 – 18.00% • Nickel (Ni): 10.00 – 14.00% • Molybdenum (Mo): 2.00 – 3.00% • Iron (Fe): Balance Uses • Protects reheater tubes from erosion, oxidation, and chloride-induced corrosion • Shields R/H tubes in high-velocity flue gas and particle-laden zones • Extends service life of steam system components under aggressive operating conditions • Suitable for utility boilers, WHRBs, HRSGs, and process heaters Features • Excellent corrosion resistance – Performs well in chloride-rich and oxidizing environments • High thermal stability – Maintains mechanical strength at elevated temperatures • Molybdenum alloyed – Enhanced resistance to pitting and crevice corrosion • Precision-engineered fit – Designed to match exact tube curvature for maximum coverage Applications • Power generation boilers – Long-term reheater tube protection in severe conditions • Waste heat recovery systems – Guards against erosion from high-velocity particles • Industrial steam plants – Reliable under variable thermal cycles • Petrochemical and marine-based steam systems – Suitable for saline and chloride-heavy atmospheres Conclusion The SS 316 Half Round Tube Shield for Reheater (R/H) Tubes by Ladhani Metal Corporation offers high-performance protection against erosion, oxidation, and corrosive damage in extreme operating environments. Designed for precision fit and durability, these shields reduce maintenance downtime and extend equipment lifespan. Available in a wide range of export-ready specifications, they are trusted by industries worldwide. For technical details and supply inquiries, contact Ladhani Metal Corporation. #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Salem #Erode #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Hassan #Cuttack #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Gaya #Muzaffarpur#halftubeshield #utypehalftubeshield #tubeshieldexporter #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier #SSShielding #IndustrialTubeShield #BoilerTubeGuard #CustomMetalParts #SteelIndustryIndia #MetalEngineering #HeavyIndustrySupply #StainlessSteelIndia #SteelExporters #MetalComponentExport #FabricatedProducts #SteelDealer #IndustrialSupplyIndia #BoilerTubeFittings #TubeShieldingSolutions #HalfTubeCover #HeatExchangerShield #HalfRoundReheaterShield #ReheaterTubeShield #BoilerReheaterProtection #PowerPlantTubeShield #BoilerErosionShield #SteamBoilerTubeShield #HighTempTubeShield #BoilerWearProtection