DIN 2634 stainless steel flanges PN 25 are precision-engineered weld neck flanges designed and manufactured in accordance with the DIN 2634 standard. These flanges are suitable for high-pressure pipeline systems operating up to 25 bar (362 psi), providing robust and secure connections for a variety of critical industrial applications. Constructed from high-quality stainless steel grades such as 304, 316, and 321, these flanges offer excellent mechanical properties, enhanced corrosion resistance, and dependable performance in aggressive service conditions. Ladhani Metal Corporation is a globally recognized manufacturer and supplier of stainless steel flanges, known for delivering high-precision products that meet stringent international quality and dimensional standards. Each flange undergoes rigorous testing and quality checks to ensure optimal performance, safety, and longevity under high-pressure conditions. Pressure Rating: • PN 25 (25 bar / 362 psi): Engineered for high-pressure environments requiring reinforced flange connections with reliable resistance to corrosion and mechanical stress. Flange Type: • Weld Neck Flanges Incorporating a long tapered hub, weld neck flanges help maintain pipe alignment, reduce stress concentration at the weld joint, and enable smooth fluid flow with minimal turbulence. • Flat Face (FF) Flanges Ideal for systems utilizing soft gaskets or cast components, flat face flanges promote consistent gasket compression and sealing integrity. Stainless Steel Grades and Typical Composition: Stainless Steel 304 • Chromium (Cr): 18.0 – 20.0% • Nickel (Ni): 8.0 – 10.5% • Carbon (C): ≤ 0.08% (304), ≤ 0.03% (304L) • Manganese (Mn): ≤ 2.0% • Silicon (Si): ≤ 1.0% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.03% • Iron (Fe): Balance Applications: Suitable for general-purpose piping systems in environments with moderate corrosion exposure, including potable water and light-duty process lines. Stainless Steel 316 • Chromium (Cr): 16.0 – 18.0% • Nickel (Ni): 10.0 – 14.0% • Molybdenum (Mo): 2.0 – 3.0% • Carbon (C): ≤ 0.08% (316), ≤ 0.03% (316L) • Manganese (Mn): ≤ 2.0% • Silicon (Si): ≤ 1.0% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.03% • Iron (Fe): Balance Applications: Ideal for systems exposed to chlorides, cleaning agents, or other corrosive substances such as in chemical processing, pharmaceuticals, and marine environments. Stainless Steel 321 • Chromium (Cr): 17.0 – 19.0% • Nickel (Ni): 9.0 – 12.0% • Titanium (Ti): ≥ 5 × C (typically 0.20 – 0.70%) • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.0% • Silicon (Si): ≤ 1.0% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.03% • Iron (Fe): Balance Applications: Frequently used in high-temperature services such as thermal processing equipment, exhaust systems, and heat exchangers due to its stability against intergranular corrosion. Applications of DIN 2634 Stainless Steel Flanges PN 25: • Chemical Processing Units Handles higher operating pressures in systems transporting acids, alkalis, and solvents. • Marine and Offshore Installations Resistant to pressure fluctuations and saltwater corrosion in offshore piping networks. • Pharmaceutical and Biotech Plants Used in clean process environments where both pressure integrity and corrosion resistance are critical. • Industrial Steam and Thermal Systems Suitable for steam distribution and thermal expansion pipelines operating under high pressure. • Power Generation Facilities Applied in turbine piping, heat recovery systems, and pressurized cooling water circuits. Key Features: • Manufactured to DIN 2634 dimensional and pressure specifications • PN 25 pressure rating supports high-pressure operation • Weld neck design ensures leak-tight, stress-resistant connections • Available in stainless steel grades 304, 316, 321 and their low-carbon variants • Superior resistance to high-temperature corrosion and chemical attack • Long-term mechanical strength and fatigue resistance • Custom sizes, finishes, and pressure ratings available upon request Conclusion: DIN 2634 stainless steel flanges PN 25 from Ladhani Metal Corporation are engineered for high-performance use in high-pressure industrial environments where safety, corrosion resistance, and durability are paramount. These flanges are ideal for chemical, marine, thermal, and high-purity applications requiring strong, leak-resistant, and corrosion-resistant connections. For technical support, customized solutions, or pricing details, contact Ladhani Metal Corporation today.

DIN 2632 duplex steel flanges PN 10 are robust weld neck flanges manufactured in accordance with the DIN 2632 standard, designed for medium-pressure applications up to 10 bar (145 psi). These flanges are made from duplex stainless steel, a material that combines the high strength of ferritic steel with the corrosion resistance of austenitic stainless steel. This dual-phase microstructure provides excellent resistance to stress corrosion cracking, pitting, and crevice corrosion in aggressive environments. Ladhani Metal Corporation is a reputable global manufacturer and supplier of duplex steel flanges, offering products with precise dimensions, superior mechanical integrity, and full compliance with international industry standards. All flanges are rigorously inspected and tested to ensure reliability in demanding applications. Pressure Rating: • PN 10 (10 bar / 145 psi): Ideal for medium-pressure piping systems requiring a balance of strength, corrosion resistance, and cost efficiency. Flange Type: • Weld Neck Flanges Engineered with a long tapered hub for secure and stress-reducing pipe-to-flange connections. Supports smooth fluid transition and minimizes turbulence. • Flat Face (FF) Flanges Flat face construction ensures even gasket compression, suitable for use with soft gasket materials and cast equipment. Duplex Steel Grades and Composition: Duplex 2205 (UNS S32205 / S31803) • Chromium (Cr): 21–23% • Nickel (Ni): 4.5–6.5% • Molybdenum (Mo): 2.5–3.5% • Nitrogen (N): 0.14–0.20% • Manganese (Mn): ≤ 2.0% • Carbon (C): ≤ 0.03% • Iron (Fe): Balance Applications: Duplex 2205 offers outstanding resistance to pitting, crevice corrosion, and chloride stress corrosion cracking. It is widely used in offshore platforms, chemical processing, marine environments, and desalination plants. Applications of DIN 2632 Duplex Steel Flanges PN 10: • Oil and Gas Industry Used in offshore and onshore systems handling sour gas, saltwater, and corrosive media. • Chemical and Petrochemical Ideal for reactors, heat exchangers, and piping exposed to acids, chlorides, and oxidizing substances. • Marine and Shipbuilding Provides excellent performance in seawater systems, ballast water treatment, and ship hull piping. • Desalination and Water Treatment Ensures long-term performance in high-salinity and high-chloride environments. • Pulp and Paper Applied in bleach plants and other areas exposed to aggressive chemical agents. Key Features: • Manufactured to DIN 2632 specifications • PN 10 pressure rating suitable for medium-pressure applications • Weld neck design for high-integrity, low-stress connections • Available in Duplex 2205 and Super Duplex 2507 for tailored corrosion resistance and strength • Flat face option for optimal gasket compression • Excellent resistance to stress corrosion cracking and pitting • High strength-to-weight ratio • Custom sizes, pressure classes, and finishes available upon request Conclusion: DIN 2632 duplex steel flanges PN 10 from Ladhani Metal Corporation provide a highly reliable, corrosion-resistant, and mechanically strong solution for demanding industrial applications. With advanced material options such as Duplex 2205 and Super Duplex 2507, these flanges are well-suited for marine, chemical, oil and gas, and water treatment sectors. For customized solutions, technical support, or pricing details, contact Ladhani Metal Corporation today

DIN 2632 Monel flanges PN 10 are high-performance weld neck flanges manufactured to meet the DIN 2632 standard, specifically designed for medium-pressure applications up to 10 bar (145 psi). These flanges are made from Monel, a nickel-copper alloy known for its outstanding corrosion resistance, particularly in marine and chemical environments. With excellent mechanical strength and superior durability in highly aggressive conditions, DIN 2632 Monel flanges provide a reliable solution where standard materials may fail. Ladhani Metal Corporation is a leading global manufacturer and supplier of Monel flanges, delivering consistent quality, dimensional accuracy, and full compliance with international standards. Each flange is meticulously tested to ensure optimum performance under demanding industrial conditions. Pressure Rating: • PN 10 (10 bar / 145 psi): Suitable for medium-pressure piping systems requiring high corrosion resistance and mechanical stability. Flange Type: • Weld Neck Flanges Designed with a long tapered hub that ensures precise pipe alignment and reduces localized stress at the flange connection. Ideal for high-integrity, high-strength joints. • Flat Face (FF) Flanges Flat face configuration ensures uniform gasket compression, making them ideal for systems using soft gaskets or connecting to cast components. Monel Grades and Composition: Monel 400 • Nickel (Ni): Minimum 63% • Copper (Cu): 28–34% • Iron (Fe): 2.0–2.5% • Manganese (Mn): ≤ 2.0% • Silicon (Si): ≤ 0.5% • Carbon (C): ≤ 0.3% Applications: Monel 400 is widely used in chemical and marine environments due to its excellent resistance to seawater, acids, and alkalis. It is commonly used in heat exchangers, seawater piping, pumps, and valves handling corrosive media. Monel K500 • Nickel (Ni): 63% minimum • Copper (Cu): 27–33% • Aluminum (Al): 2.3–3.15% • Titanium (Ti): 0.35–0.85% • Iron (Fe): ≤ 2.0% • Carbon (C): ≤ 0.25% Applications: Monel K500 combines the corrosion resistance of Monel 400 with greater strength and hardness due to age-hardening. It is used in marine shafts, chemical processing equipment, oil and gas tools, and high-strength fasteners. Applications of DIN 2632 Monel Flanges PN 10: • Marine and Offshore Ideal for seawater handling systems, shipbuilding, desalination units, and offshore platforms exposed to highly corrosive saltwater environments. • Chemical and Petrochemical Industry Used in pipelines and vessels transporting sulfuric acid, hydrofluoric acid, alkalis, and other aggressive substances. • Oil and Gas Industry Suitable for sour gas environments, offshore rigs, and subsea applications where corrosion and stress resistance are critical. • Power Generation Applied in cooling systems, condensers, and process equipment subjected to brine, steam, and corrosive gases. Key Features: • Fabricated to DIN 2632 specifications • PN 10 pressure rating for medium-pressure service • Weld neck and flat face designs available • Manufactured using Monel 400 and Monel K500 for corrosion-intensive applications • Exceptional resistance to seawater, acids, and alkalis • High strength and toughness even at elevated temperatures • Ideal for marine, chemical, and oil & gas industries • Custom dimensions, finishes, and alloy compositions available upon request Conclusion: DIN 2632 Monel Flanges PN 10 from Ladhani Metal Corporation are engineered to provide superior corrosion resistance, mechanical strength, and long-term reliability in medium-pressure industrial systems. With Monel grades 400 and K500, these flanges are well-suited for harsh environments in the marine, chemical, petrochemical, and offshore sectors. For detailed specifications, custom requirements, or pricing information, contact Ladhani Metal Corporation today.

DIN 2632 titanium flanges PN 10 are precision-fabricated weld neck flanges produced according to the DIN 2632 standard. These flanges are designed for medium-pressure applications up to 10 bar (145 psi), offering excellent corrosion resistance, strength, and durability in highly demanding industrial environments. Manufactured from high-grade titanium alloys, they provide outstanding performance in aggressive chemical, marine, and high-temperature settings where conventional materials may fail. Ladhani Metal Corporation is a trusted global manufacturer and supplier of titanium flanges, known for its consistent quality and engineering precision. Each flange is rigorously tested to ensure compliance with applicable industrial standards and environmental regulations. Pressure Rating: • PN 10 (10 bar / 145 psi): Suitable for medium-pressure pipeline systems requiring superior corrosion resistance and mechanical integrity. Flange Type: • Weld Neck Flanges Designed with a long tapered hub to ensure strong pipe alignment and reduce stress concentration at the flange base. This design supports smooth flow transitions and enhances joint strength. • Flat Face (FF) Flanges Flat face design promotes even gasket compression and is preferred for use with cast components or soft gasket materials. Titanium Grades and Composition: Grade 2 (Commercially Pure Titanium) • Titanium (Ti): ≥ 99.2% • Oxygen (O): ≤ 0.25% • Carbon (C): ≤ 0.08% • Nitrogen (N): ≤ 0.03% • Iron (Fe): ≤ 0.30% • Hydrogen (H): ≤ 0.015% Applications: Known for excellent corrosion resistance and good mechanical properties, Grade 2 titanium is commonly used in chemical processing, water treatment, and marine applications where corrosion resistance is critical. Grade 5 (Ti-6Al-4V Alloy) • Titanium (Ti): Balance • Aluminum (Al): 5.5 – 6.75% • Vanadium (V): 3.5 – 4.5% • Iron (Fe): ≤ 0.30% • Oxygen (O): ≤ 0.20% • Carbon (C): ≤ 0.08% • Nitrogen (N): ≤ 0.05% Applications: Grade 5 offers superior strength and excellent corrosion resistance, widely used in aerospace, marine, and high-performance chemical environments requiring higher mechanical properties. Applications of DIN 2632 Titanium Flanges PN 10: • Chemical and Petrochemical Industry Used in piping systems transporting aggressive acids, alkalis, and oxidizing substances. • Marine and Offshore Ideal for seawater piping, shipbuilding, and offshore platforms requiring corrosion-resistant materials. • Water Treatment and Desalination Applied in high-purity water systems and desalination plants operating at moderate pressures. • Aerospace and Power Generation Used in environments exposed to high temperatures and corrosive atmospheres. Key Features: • Compliant with DIN 2632 standards • PN 10 pressure rating for medium-pressure service • Weld neck design for robust pipe-flange connection • Available in Grade 2 and Grade 5 titanium alloys for tailored performance • Flat face option for even gasket contact • Lightweight with high strength-to-weight ratio • Suitable for harsh chemical and marine environments • Custom sizes, finishes, and titanium grades available upon request Conclusion: DIN 2632 Titanium Flanges PN 10 from Ladhani Metal Corporation offer a reliable and durable solution for medium-pressure applications demanding exceptional corrosion resistance and mechanical performance. Made from premium titanium alloys such as Grade 2 and Grade 5, these flanges are ideal for chemical, marine, desalination, aerospace, and power generation sectors. For custom dimensions, technical consultation, or pricing information, contact Ladhani Metal Corporation today.

DIN 2630 stainless steel flanges PN 2.5 are precision-fabricated weld neck flanges produced in accordance with the DIN 2630 standard. These flanges are engineered for low-pressure applications up to 2.5 bar (36.25 psi), providing reliable and leak-resistant connections in light-duty and non-critical piping systems. Manufactured from premium stainless steel grades including 304, 316, and 321, they offer excellent corrosion resistance, mechanical stability, and longevity even in mildly corrosive or intermittent industrial environments. Ladhani Metal Corporation is a globally trusted manufacturer and supplier of stainless steel flanges, known for delivering consistent quality and engineering precision. Ladhani Metal Corporation ensures each flange meets relevant industrial standards and environmental requirements. Pressure Rating: • PN 2.5 (2.5 bar / 36.25 psi): Suitable for low-pressure pipeline systems that require basic joint integrity and corrosion resistance. Flange Type: • Weld Neck Flanges Designed with a long tapered hub to support pipe alignment and reduce stress at the base of the flange. Ensures steady flow transition with minimal turbulence. • Flat Face (FF) Flanges Flat face design ensures even gasket compression and is preferred in systems using cast components or soft gasket materials. Stainless Steel Grades and Full Composition: Stainless Steel 304 • Chromium (Cr): 18.0 – 20.0% • Nickel (Ni): 8.0 – 10.5% • Carbon (C): ≤ 0.08% (304), ≤ 0.03% (304L) • Manganese (Mn): ≤ 2.0% • Silicon (Si): ≤ 1.0% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.03% • Iron (Fe): Balance Applications: Ideal for general-purpose low-pressure systems including potable water lines, food-grade applications, and non-aggressive chemical piping. Stainless Steel 316 • Chromium (Cr): 16.0 – 18.0% • Nickel (Ni): 10.0 – 14.0% • Molybdenum (Mo): 2.0 – 3.0% • Carbon (C): ≤ 0.08% (316), ≤ 0.03% (316L) • Manganese (Mn): ≤ 2.0% • Silicon (Si): ≤ 1.0% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.03% • Iron (Fe): Balance Applications: Offers higher corrosion resistance for systems handling chlorinated water, cleaning agents, or mildly acidic substances. Common in pharmaceutical and marine-grade piping. Stainless Steel 321 • Chromium (Cr): 17.0 – 19.0% • Nickel (Ni): 9.0 – 12.0% • Titanium (Ti): ≥ 5 × C (typically 0.20 – 0.70%) • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.0% • Silicon (Si): ≤ 1.0% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.03% • Iron (Fe): Balance Applications: Best suited for moderate temperature and corrosion conditions. Often used in low-pressure exhaust lines, thermal processing, and food-grade heat equipment. Applications of DIN 2630 Stainless Steel Flanges PN 2.5: • Water Supply and Treatment Used in potable and greywater systems requiring low-pressure fluid conveyance. • Food and Beverage Industry Ideal for hygienic piping with low flow rates and non-corrosive media. • Chemical Distribution Used in systems handling diluted or non-aggressive chemicals. • HVAC and Ventilation Suited for duct flanges and connections in air-handling systems. Key Features: • Compliant with DIN 2630 standards • PN 2.5 pressure class for low-pressure service • Weld neck design for improved pipe-flange connection • Available in stainless steel grades 304, 316, and 321 • Flat face configuration for even gasket contact • Corrosion-resistant and long-lasting under mild mechanical loads • Suitable for food-grade, chemical, and HVAC systems • Custom sizes, finishes, and material grades available upon request Conclusion: DIN 2630 Stainless Steel Flanges PN 2.5 from Ladhani Metal Corporation are optimized for low-pressure industrial applications where corrosion resistance, hygiene, and operational simplicity are key. Made from high-grade stainless steel materials, these weld neck flanges offer a reliable, economical solution for various sectors including water distribution, food processing, and light chemical service. For custom dimensions, technical consultation, or pricing details, contact Ladhani Metal Corporation today.

DIN 2573 Monel Flanges PN 6 are premium-quality, low-pressure plate flanges crafted from Monel alloys, specifically engineered for systems that operate in highly corrosive and aggressive environments. Manufactured in accordance with DIN 2573 standards, these flanges offer excellent resistance to seawater, acids, and high-temperature conditions, making them an ideal choice for industries such as marine engineering, chemical processing, oil and gas, and power generation. The exceptional properties of Monel alloys ensure durability and reliability in applications requiring strong resistance to pitting, crevice corrosion, and stress corrosion cracking. Ladhani Metal Corporation is a trusted manufacturer and global supplier of Monel alloy flanges, delivering high-quality products that meet rigorous international standards. The DIN 2573 flange design ensures easy installation and provides a secure, leak-free connection, even in low-pressure, harsh environments. Pressure Rating: • PN 6 (6 bar / 87 psi): Designed for low-pressure applications in corrosive and high-temperature environments where Monel’s strength and resistance to corrosion are critical for long-term performance. Flange Types: • Plate Flanges Flat flanges ideal for bolted connections in piping systems where gasket sealing is required, providing secure, leak-free operation in low-pressure systems. • Flat Face (FF) Flanges Used with flat gaskets and mating surfaces, ensuring uniform contact and load distribution, particularly when joining with non-metallic components or cast iron systems. • Slip-On Flanges These flanges slip over the pipe, providing easy alignment and easy-to-weld connections, ideal for low-pressure applications with moderate pressure fluctuations. • Custom-Machined Flanges Tailored to meet specific dimensional and material requirements, available in various sizes, grades, and face finishes to suit the needs of custom applications. Monel Grades and Composition: Monel 400 (UNS N04400) Composition: • Nickel (Ni): 63.0 – 70.0% • Copper (Cu): 28.0 – 34.0% • Iron (Fe): ≤ 2.5% • Manganese (Mn), Silicon (Si), Carbon (C): Trace amounts Applications: Monel 400 is widely used in marine environments, chemical processing, and heat exchangers, where it is subjected to both high temperatures and exposure to saltwater or acids. Its superior resistance to corrosion and oxidation makes it a preferred material in demanding applications like pumps, valves, and marine piping systems. Monel K-500 (UNS N05500) Composition: • Nickel (Ni): 63.0 – 70.0% • Copper (Cu): 27.0 – 33.0% • Aluminum (Al): 2.3 – 3.2% • Titanium (Ti): 0.35 – 0.85% • Iron (Fe): ≤ 2.5% Applications: Monel K-500 offers higher strength and hardness compared to Monel 400, making it suitable for applications in oil and gas extraction, marine industries, and aerospace systems, where both corrosion resistance and high mechanical properties are required. Applications of DIN 2573 Monel Flanges: • Chemical and Petrochemical Plants: Monel flanges are ideal for use in chemical reactors, exchangers, and pipelines handling aggressive chemicals like sulfuric acid, hydrochloric acid, and caustics. • Marine and Offshore Engineering: Highly resistant to seawater corrosion, Monel flanges are used extensively in marine piping systems, offshore oil rigs, and shipbuilding applications where exposure to saltwater and harsh weather conditions is frequent. • Oil and Gas Industry: Monel flanges are often used in production platforms, refineries, and pipelines exposed to brine and acidic substances, offering both strength and resistance to corrosion under high-stress conditions. • Power Generation: Used in systems handling high-temperature steam and corrosive environments, Monel flanges provide reliable service for high-performance power plant components. • Desalination and Water Treatment: With their corrosion resistance to saline environments, Monel flanges are also ideal for seawater desalination plants and water treatment facilities. Key Features: • Manufactured according to DIN 2573 standards • Rated for PN 6 low-pressure systems, with exceptional resistance to corrosion • Outstanding performance in highly corrosive, high-temperature environments • Available in Monel 400, Monel K-500, and other Monel alloys • High strength-to-weight ratio for reliable long-term performance • Suitable for marine, offshore, chemical, and power generation applications • Available with custom drilling, surface finishes, and flange faces Conclusion: DIN 2573 Monel Flanges PN 6 from Ladhani Metal Corporation provide unmatched durability, corrosion resistance, and performance in low-pressure applications exposed to challenging chemical, thermal, and environmental conditions. For custom dimensions, material selections, or technical support, contact Ladhani Metal Corporation today.

DIN 2567 stainless steel flanges are high-quality, corrosion-resistant flanges designed for medium to high-pressure piping systems. Manufactured according to the DIN 2567 standard, these flanges offer reliable, leak-free connections that are suitable for a wide range of industrial applications, particularly in environments requiring superior resistance to rust, corrosion, and extreme temperatures. Their durability and ease of installation make them ideal for systems needing frequent maintenance or modification. Ladhani Metal Corporation is a prominent manufacturer and exporter of stainless steel flanges, offering precisely engineered products with excellent mechanical properties, corrosion resistance, and high-temperature performance. DIN 2567 stainless steel flanges are widely utilized across various industries such as chemical processing, oil & gas, power generation, and water treatment. Flange Types: • Threaded (Screwed) Flanges: These enable fast, non-welded assembly, ideal for systems requiring frequent disassembly and reassembly, such as in maintenance-driven or temporary installations. • Raised Face (RF) Flanges: Designed to enhance gasket sealing by concentrating pressure on a smaller contact area, improving the sealing ability in high-pressure systems. • Flat Face (FF) Flanges: Commonly used with cast iron or non-metallic equipment in lower-to-medium pressure systems, providing a flat sealing surface. • Forged Threaded Flanges: Offer improved strength, impact resistance, and dimensional accuracy, making them suitable for demanding applications. • Custom-Machined Flanges: Tailored to customer-specific requirements, including pressure class, size, and material variant. Available Stainless Steel Grades and Composition: 1. Grade 304 o Carbon (C): ≤ 0.08% o Manganese (Mn): 2.00 – 2.50% o Phosphorus (P): ≤ 0.045% o Sulfur (S): ≤ 0.030% o Silicon (Si): ≤ 1.00% o Chromium (Cr): 18.00 – 20.00% o Nickel (Ni): 8.00 – 10.50% Applications: Widely used in food processing, chemical industries, plumbing, and water treatment systems. The corrosion-resistant properties make it ideal for various industrial and marine environments. 2. Grade 316 o Carbon (C): ≤ 0.08% o Manganese (Mn): 2.00 – 2.50% o Phosphorus (P): ≤ 0.045% o Sulfur (S): ≤ 0.030% o Silicon (Si): ≤ 1.00% o Chromium (Cr): 16.00 – 18.00% o Nickel (Ni): 10.00 – 14.00% o Molybdenum (Mo): 2.00 – 3.00% Applications: Ideal for harsh, high-corrosion environments such as chemical and petrochemical industries, marine applications, and systems requiring resistance to pitting and crevice corrosion. 3. Grade 321 o Carbon (C): ≤ 0.08% o Manganese (Mn): 2.00 – 2.50% o Phosphorus (P): ≤ 0.045% o Sulfur (S): ≤ 0.030% o Silicon (Si): ≤ 1.00% o Chromium (Cr): 17.00 – 19.00% o Nickel (Ni): 9.00 – 12.00% o Titanium (Ti): 5 times the carbon content, minimum of 0.60% Applications: Suitable for high-temperature applications and environments where good oxidation and corrosion resistance are necessary. Often used in applications involving elevated temperatures, such as exhaust systems, heat exchangers, and boilers. Applications of DIN 2567 Stainless Steel Flanges: • Chemical Processing Industry: Used in pipelines, reactors, and pumps for handling corrosive substances. • Oil & Gas Industry: Common in offshore platforms, refineries, and subsea pipelines. • Power Plants: Ideal for steam, gas, and cooling water pipelines where high-temperature resistance is needed. • Water & Wastewater Treatment: Cost-effective and durable for fluid handling, filtration lines, and desalination plants. • Food & Beverage Industry: Hygiene and corrosion resistance make them suitable for food processing and pharmaceutical manufacturing systems. • Marine and Offshore: Excellent for use in saltwater environments and high-humidity areas. Key Features: • Manufactured to DIN 2567 standard with PN 25 and PN 40 pressure ratings • High resistance to corrosion, pitting, and oxidation, even in aggressive environments • Available in a range of stainless steel grades: 304, 316, 321 • Superior mechanical strength and excellent weldability • Easy installation with a threaded design for non-welded assembly Conclusion: DIN 2567 stainless steel flanges PN 25 and PN 40 from Ladhani Metal Corporation provide a reliable, high-performance solution for medium to high-pressure piping systems. With exceptional resistance to corrosion, high temperatures, and mechanical stress, these flanges are engineered to perform in demanding industrial environments. For custom specifications, large orders, or further inquiries, contact Ladhani Metal Corporation today.

DIN 2545 Inconel flanges are engineered for superior strength, excellent resistance to high temperatures, and remarkable corrosion resistance in extreme environments. Ladhani Metal Corporation provides these high-quality flanges made from Inconel alloys, known for their ability to endure elevated temperatures, oxidation, and corrosive conditions. These flanges are ideal for industries where performance under high-temperature stress and resistance to harsh environments are essential, such as aerospace, chemical processing, power generation, and marine. Types of DIN 2545 Inconel Flanges: Flat Face Flanges (FF) – These flanges have a flat surface that facilitates uniform distribution of the sealing force, making them ideal for low-pressure systems or when a secure seal is required. Raised Face Flanges (RF) – Raised face flanges feature a raised area around the bolt holes, providing enhanced sealing pressure, making them suitable for high-pressure environments. Ring-Type Joint (RTJ) Flanges – Designed with a groove for a metal sealing ring, these flanges are ideal for applications requiring resistance to high pressure and high temperatures. Grades and Chemical Composition: Inconel 600 (UNS N06600) Chemical Composition: Ni: 72%, Cr: 14-17%, Fe: balance, Mn: 1%, Si: 0.5%, C: 0.15% Inconel 600 is known for its excellent resistance to oxidation and corrosion at elevated temperatures. It is widely used in applications like furnace components, chemical processing, and nuclear reactors, offering high strength and good workability. Inconel 625 (UNS N06625) Chemical Composition: Ni: 58%, Cr: 20-23%, Mo: 8-10%, Fe: 5%, Nb: 3.15-4.15%, Ti: 0.4-1% Inconel 625 is a nickel-based alloy that offers superior resistance to high-temperature oxidation and corrosion. It provides exceptional resistance to pitting and crevice corrosion, making it ideal for applications in aerospace, marine, and chemical industries, where high temperatures and corrosive environments are common. Inconel 718 (UNS N07718) Chemical Composition: Ni: 50-55%, Cr: 17-21%, Fe: 0-5%, Mo: 2.8-3.3%, Nb+Ta: 4.75-5.5%, Ti: 0.65-1.15%, Al: 0.2-0.8% Inconel 718 is a high-strength, corrosion-resistant alloy widely used in high-temperature applications. It is designed for use in extreme conditions, offering excellent resistance to oxidation, sulfidation, and high-temperature environments. PN 40 Pressure Rating: The "PN" rating indicates the flange's pressure capacity. PN 40 refers to flanges that are designed to withstand pressures up to 40 bar, making them suitable for high-pressure systems where secure, leak-free connections are essential. Applications: Aerospace Industry: Jet Engines and Turbomachinery: Inconel flanges are commonly used in aerospace applications, including jet engines and turbine systems, where components are exposed to extremely high temperatures and pressures. They provide excellent resistance to heat and corrosion in high-stress environments. Exhaust Systems: Inconel's ability to withstand high temperatures makes it ideal for use in exhaust systems of aircraft engines. 2. Power Generation Industry: Gas Turbines: Inconel flanges are used in gas turbines in power plants, particularly in components that operate at high temperatures, such as turbine blades, combustors, and other critical parts. Nuclear Power Plants: Inconel is used in the construction of components for nuclear reactors, where heat and radiation resistance are crucial. It is used in piping, valves, and other systems exposed to high-temperature nuclear environments. 3. Chemical Processing and Petrochemical Industries: High-Temperature Reactors: Inconel flanges are used in reactors, heat exchangers, and other equipment in the chemical industry that handle aggressive, high-temperature chemical reactions, including those with sulfuric acid, chlorine, and other corrosive substances. Petrochemical Refineries: Inconel is used in systems where high temperatures and reactive chemicals are present, offering superior performance in handling corrosive materials such as acids and hydrocarbons. 4. Oil and Gas Industry: Offshore Platforms: Inconel flanges are widely used in offshore oil and gas platforms, particularly in subsea pipelines, risers, and pressure vessels, where high resistance to both high pressure and corrosion (especially from seawater) is necessary. Wellhead Equipment: Inconel flanges are also used in downhole equipment and wellhead connections that need to resist high-pressure environments and exposure to extreme temperatures. Ladhani Metal Corporation ensures that each Inconel flange is produced to the highest standards of quality and precision, adhering to international specifications. Every flange undergoes thorough testing to meet the required durability and performance standards, providing reliable solutions for critical applications in the most challenging environments. #din2545 #din2545flanges #din2545inconelflanges #flanges #flangessupplier

Titanium blind flanges Material: GR1 GR2 GR7 GR11 GR12(F2 F7 F11 F12) Standard:ANSI B16.5,ANSI B16.47A, ANSI B16.47 Size:1/2"~80" Class 150 class 300 class 600 class 900 class 1500 Technique:Forged, CNC machined