Ladhani Metal Corporation offers 1Cr13 Half Round Tube Shields designed to protect reheater (R/H) tubes in boilers, power plants, and industrial steam systems. Reheater tubes carry steam through the reheater section of the boiler, where it is reheated after partial expansion in the high-pressure turbine to improve efficiency and minimize moisture formation. Manufactured from martensitic stainless steel grade 1Cr13, these shields provide good mechanical strength, oxidation resistance, and reliable protection against erosion and wear in high-temperature boiler environments. Function of R/H Tubes • Carry steam through the reheater section of the boiler • Exposed to very high temperatures (often > 540°C) and erosion from flue gases • Often protected with Half Round Tube Shields in high-velocity and ash-laden zones Ladhani Metal Corporation manufactures, supplies, and exports 1Cr13 Half Round Tube Shields in a variety of lengths, diameters, and thicknesses to meet both domestic and international requirements. 1Cr13 Grade Chemical Composition – Martensitic Stainless Steel • Carbon (C): ≤ 0.15% • Manganese (Mn): ≤ 1.00% • Phosphorus (P): ≤ 0.040% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 12.00 – 14.00% • Nickel (Ni): ≤ 0.60% • Iron (Fe): Balance Applications: Well-suited for reheater tubes in thermal power plants, industrial steam plants, and boilers requiring strong mechanical performance with moderate corrosion and oxidation resistance. Uses • Shields reheater tubes from erosion and flue gas oxidation • Protects against soot blower impact and abrasive ash particles • Extends service life of steam circuit components under elevated temperatures • Commonly used in WHRBs, HRSGs, and industrial boilers Features • Strong mechanical strength at high temperatures • Moderate oxidation and corrosion resistance in boiler atmospheres • Cost-effective solution for erosion-prone areas • Manufactured for precise fit and easy installation Applications • Power generation boilers – Protection for reheater sections exposed to erosion • Waste heat recovery boilers – Guards tubes from abrasive gas flows • Industrial steam systems – Reliable under medium-to-high temperature cycles • Process boilers – Provides extended service life in erosive conditions Conclusion The 1Cr13 Half Round Tube Shield for Reheater (R/H) Tubes by Ladhani Metal Corporation provides durable, cost-effective protection for boiler tubes exposed to erosion and high-temperature oxidation. Designed for precision fit and long service life, these shields are available in a wide range of export-ready specifications. For supply and technical inquiries, contact Ladhani Metal Corporation. #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Muzaffarpur#halftubeshield #utypehalftubeshield #tubeshieldexporter #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier #SSShielding #IndustrialTubeShield #BoilerTubeGuard #CustomMetalParts #SteelIndustryIndia #MetalEngineering #HeavyIndustrySupply #StainlessSteelIndia #SteelExporters #MetalComponentExport #FabricatedProducts #SteelDealer #IndustrialSupplyIndia #BoilerTubeFittings #TubeShieldingSolutions #HalfTubeCover #HeatExchangerShield #HalfRoundReheaterShield #ReheaterTubeShield #BoilerReheaterProtection #PowerPlantTubeShield #BoilerErosionShield #SteamBoilerTubeShield #HighTempTubeShield #BoilerWearProtection

Ladhani Metal Corporation offers SS 304 Half Round Tube Shields designed for reheater (R/H) tubes in boilers and power plant steam systems. Reheater tubes carry steam through the reheater section of the boiler, where it is reheated after partial expansion in the high-pressure turbine to increase efficiency and prevent condensation. Manufactured from austenitic stainless steel grade SS 304, these shields offer excellent corrosion resistance, high-temperature oxidation resistance, and mechanical strength. Precision-formed to match the tube surface, they ensure secure coverage and reliable performance. Function of R/H Tubes • Carry steam through the reheater section of the boiler • Exposed to very high temperatures (often > 540°C) and erosion from flue gases • Often protected with Half Round Tube Shields in areas where flue gas velocity and ash particles cause wear Ladhani Metal Corporation manufactures, supplies, and exports SS 304 Half Round Tube Shields in various lengths, diameters, and thicknesses for both domestic and international markets. SS 304 Grade Chemical Composition – Austenitic Stainless Steel • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 18.00 – 20.00% • Nickel (Ni): 8.00 – 10.50% • Iron (Fe): Balance Uses • Shields reheater tubes from erosion, oxidation, and soot blower damage • Protects tubes in boiler reheater sections exposed to abrasive flue gases • Extends operational life of R/H tubes in high-temperature steam circuits • Suitable for utility boilers, WHRBs, and HRSG systems Features • Excellent corrosion and oxidation resistance – Ensures durability in flue gas environments • Thermal stability – Retains strength at reheater operating temperatures • Precision fit – Designed for accurate coverage of reheater tube surfaces • Long service life – Reduces wear and maintenance downtime • Multiple installation options – Welded, clamped, or banded securely Applications • Power generation boilers – Protects reheater sections from high-temperature wear • Waste heat recovery systems – Guards R/H tubes in oxidizing gas flows • Industrial steam plants – Reliable under thermal cycling • Petrochemical and process industries – Suitable for furnace steam reheating Conclusion The SS 304 Half Round Tube Shield for Reheater (R/H) Tubes by Ladhani Metal Corporation is engineered for robust protection against erosion, oxidation, and thermal wear in demanding boiler reheater environments. With excellent corrosion resistance and mechanical performance, these shields extend tube life, reduce maintenance, and are available in export-ready custom specifications. For detailed technical data and supply options, contact Ladhani Metal Corporation. #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Salem #Erode #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Hassan #Cuttack #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Gaya #Muzaffarpur#halftubeshield #utypehalftubeshield #tubeshieldexporter #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier #SSShielding #IndustrialTubeShield #BoilerTubeGuard #CustomMetalParts #SteelIndustryIndia #MetalEngineering #HeavyIndustrySupply #StainlessSteelIndia #SteelExporters #MetalComponentExport #FabricatedProducts #SteelDealer #IndustrialSupplyIndia #BoilerTubeFittings #TubeShieldingSolutions #HalfTubeCover #HeatExchangerShield #HalfRoundReheaterShield #ReheaterTubeShield #BoilerReheaterProtection #PowerPlantTubeShield #BoilerErosionShield #SteamBoilerTubeShield #HighTempTubeShield #BoilerWearProtection #IndustrialBoilerShield #HeatExchangerTubeShield

Ladhani Metal Corporation offers 1Cr25Ni20Si2 Boiler Half Round Tube Shields engineered for superior protection of boiler tubes in extremely high-temperature and abrasive service environments. Manufactured from a heat-resistant austenitic stainless steel alloy with high chromium, nickel, and silicon content, 1Cr25Ni20Si2 delivers exceptional resistance to oxidation, carburization, and high-temperature scaling. The added silicon improves anti-oxidation properties and enhances structural stability during prolonged thermal exposure. These shields are precision-formed into a half-round profile to ensure accurate coverage of straight boiler tube sections. They provide a durable physical barrier against flue gas erosion, soot blower impact, and particle-laden gas flow, significantly extending the operational life of boiler tubes. Ladhani Metal Corporation manufactures, supplies, and exports 1Cr25Ni20Si2 Boiler Half Round Tube Shields in a wide range of sizes, thicknesses, and lengths, catering to both domestic and international markets. 1Cr25Ni20Si2 Grade Chemical Composition – Heat Resistant Austenitic Stainless Steel • Carbon (C): ≤ 0.12% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.030% • Silicon (Si): 1.50 – 2.50% • Chromium (Cr): 24.00 – 26.00% • Nickel (Ni): 19.00 – 22.00% • Iron (Fe): Balance Uses • Shields straight boiler tubes in superheaters, reheaters, and economizers • Protects against oxidation, scaling, and particulate erosion • Suitable for carburizing and high-silicon demanding environments • Extends tube life in power generation and process heating units Features • Enhanced oxidation resistance – Silicon addition boosts scale resistance at extreme temperatures • Superior thermal stability – Maintains mechanical integrity during prolonged heat exposure • Precision-engineered profile – Ensures a secure and accurate fit over boiler tubes • Flexible installation – Can be welded, clamped, or banded based on site requirements • Export-ready – Compliant with international quality and dimensional standards Applications • Thermal power stations – Protects superheater and reheater tubes from oxidation and erosion • Waste heat boilers – Guards tubes in severe heat recovery operations • Petrochemical and refinery heaters – Resists carburization in furnace conditions • Metallurgy and cement industries – Provides reliable tube protection under abrasive, high-heat gas flows Conclusion The 1Cr25Ni20Si2 Boiler Half Round Tube Shield from Ladhani Metal Corporation is designed for extreme service conditions where oxidation, scaling, and high-temperature wear are major concerns. With its silicon-enhanced heat-resistant alloy composition and precise manufacturing, it ensures prolonged boiler tube life and reduced downtime. Available in customized sizes for both domestic and export orders, these shields offer dependable performance in the world’s toughest boiler and furnace environments. For specifications and order inquiries, contact Ladhani Metal Corporation. #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Salem #Erode #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Hassan #Cuttack #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Gaya #Muzaffarpur#halftubeshield #utypehalftubeshield #tubeshieldexporter #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier #SSShielding #IndustrialTubeShield #BoilerTubeGuard #CustomMetalParts #SteelIndustryIndia #MetalEngineering #HeavyIndustrySupply #StainlessSteelIndia #SteelExporters #MetalComponentExport #FabricatedProducts #SteelDealer #IndustrialSupplyIndia #BoilerTubeFittings #TubeShieldingSolutions #HalfTubeCover #HeatExchangerShield

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are precision-manufactured components designed to protect boiler and heat exchanger tubes from erosion, scaling, slag deposition, and high-temperature corrosion. These shields are essential for ensuring the longevity of tubes in power plants, petrochemical units, and high-heat industrial systems where tubes are subjected to direct flame, abrasive particles, and corrosive gases. Their half-round form enables easy and secure installation over curved or straight tube sections. Cr25Ni20 U Type Outer Half Round Tube Shield The Cr25Ni20 U Type Outer Half Round Tube Shield is fabricated from a high-alloy austenitic stainless steel containing approximately 25% chromium and 20% nickel. This alloy offers exceptional oxidation resistance, thermal stability, and resistance to carburization and sulfidation at elevated temperatures. The outer U-type shield is specifically designed to cover the external arc of U-bend tubes in superheaters, reheaters, and reformers, where they are exposed to intense heat and reactive flue gases. • Outer U Type Half Round Tube Shield – Provides robust coverage to the outer curvature of U-bend tubes, protecting against flame impingement, slag erosion, and high-temperature corrosion. Ladhani Metal Corporation is a leading manufacturer, supplier, and exporter of Cr25Ni20 U Type Outer Half Round Tube Shields, delivering high-performance tube protection for the most demanding thermal and chemical environments. Chemical Composition of Cr25Ni20 – High-Temperature Austenitic Stainless Steel • Carbon (C): ≤ 0.10% • Manganese (Mn): ≤ 1.50% • Phosphorus (P): ≤ 0.040% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 2.00% • Chromium (Cr): 24.0 – 26.0% • Nickel (Ni): 19.0 – 22.0% • Iron (Fe): Balance Applications: Ideal for extreme heat environments and oxidizing atmospheres such as furnaces, boilers, and process heaters requiring excellent scale resistance and thermal strength. Uses • Outer arc shielding of U-bend tubes in superheaters and reheaters in high-temperature thermal power plants • Protection of external bends in petrochemical heat exchangers and reformers exposed to high-temperature process gases • Coverage for U-bend tubes in waste heat recovery boilers and HRSGs operating under oxidizing and carburizing gas flows • Applied in radiant coils and return bends in industrial furnaces and incinerators exposed to direct flame and slag • Suitable for chemical and gas processing applications where metal surfaces face extreme temperature and thermal fatigue Features • Exceptional high-temperature performance – Resists scaling, oxidation, and deformation at temperatures above 1100°C • Superior corrosion resistance – High chromium and nickel content provide defense against aggressive gas attacks • Targeted outer arc protection – Guards the most exposed section of U-bend tubes from slag, heat, and particulate damage • Precision engineered – Manufactured to custom tube diameter and radius for tight and vibration-free installation • Easy installation – Designed for quick mounting using clamps, tack welds, or stainless steel banding • Long-term durability – Reduces tube replacement frequency and enhances system efficiency in harsh operating conditions Applications • thermal and captive power plants – Installed on outer arcs of U-bend tubes in boilers, superheaters, and reheaters • petrochemical and refinery systems – Shields tubes in steam reformers and process heaters subjected to extreme temperatures • waste heat recovery boilers – Protects tube bends in HRSGs and WHRBs from scale, oxidation, and thermal fatigue • metallurgical and cement industries – Applied in radiant tubes and hot gas ducts exposed to slag, dust, and intense flame • high-temperature chemical plants – Used in reactors and cracking units where resistance to carburizing and oxidizing gases is essential Conclusion The Cr25Ni20 U Type Outer Half Round Tube Shield by Ladhani Metal Corporation—manufacturer, supplier, and exporter—is a high-performance protective component for U-bend tubes exposed to severe thermal and chemical stresses. With outstanding heat resistance, oxidation protection, and structural integrity, it ensures long-term tube life and efficient performance in boilers, heat exchangers, and reformers across thermal, petrochemical, and industrial sectors. For technical consultation, custom orders, or quotations, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are high-precision protective elements designed to safeguard boiler and heat exchanger tubes against mechanical wear, erosion, and high-temperature gas attack. These shields are essential in industrial systems where exposure to thermal cycling, high-velocity gases, and abrasive particles can rapidly degrade unprotected tubing. SS 410 Half Round Tube Shield The SS 410 Half Round Tube Shield is a semi-cylindrical tube protector manufactured using stainless steel grade 410. As a martensitic stainless steel, SS 410 offers a unique combination of good corrosion resistance, high mechanical strength, and excellent wear resistance. It is particularly suitable for environments with moderate corrosion exposure and significant mechanical stress. The half-round shape is precisely formed to ensure a tight fit over exposed tubes, providing a durable and reliable barrier that extends tube service life in industrial boilers, heat exchangers, and process equipment. Chemical Composition of SS 410 – Martensitic Stainless Steel • Carbon (C): 0.08 – 0.15% • Manganese (Mn): ≤ 1.00% • Phosphorus (P): ≤ 0.040% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 11.5 – 13.5% • Nickel (Ni): ≤ 0.75% • Iron (Fe): Balance Uses • Boiler Tube Protection – Provides abrasion and erosion resistance in utility and industrial boilers where tubes face harsh combustion environments. • Heat Exchanger Shielding – Reduces mechanical wear caused by high flow velocities and particulate impact in condensers and evaporators. • Furnace Tube Safeguarding – Protects radiant and convection tubes from scale buildup and flame impingement in high-temperature furnace applications. • Steam and Process Line Protection – Extends the life of piping systems in moderately corrosive environments with mechanical stress. • Air Preheater and Economizer Units – Shields tubes from dust-laden gas erosion in flue gas recovery systems. Features • Excellent Wear Resistance – High hardness and toughness of SS 410 make it ideal for shielding tubes exposed to abrasive flows or soot-blowing operations. • Good Oxidation Resistance – Performs reliably in mildly corrosive and oxidizing environments up to 650°C (1200°F). • High Strength – Provides superior mechanical durability under vibration, pressure, and impact loading conditions. • Easy to Fabricate and Install – Half-round design allows for quick field installation and secure clamping or welding without altering system layout. • Economical Option – Offers a cost-effective tube protection solution where severe corrosion resistance is not critical. • Customization – Available in different thicknesses, diameters, lengths, and surface finishes (pickled or bright annealed). Applications • Thermal Power Plants – Used in boiler and superheater tubes to resist wear from flue gas erosion and thermal fluctuations. • Cement and Steel Industries – Protects tubes in high-wear areas exposed to dust, ash, and scale in kilns, coolers, and furnaces. • Oil Refineries – Applied in areas where high strength is required along with moderate corrosion resistance, such as preheaters or tube bundles. • Chemical Plants – Suitable for process tubes in mildly corrosive environments with strong flow dynamics or steam load cycling. • Pulp and Paper Industry – Shields tubes in recovery and power boilers exposed to high-pressure steam and abrasive residues. • Biomass and Waste-to-Energy Plants – Guards against erosion from fly ash and combustion residues in environmentally demanding systems. Conclusion The SS 410 Half Round Tube Shield from Ladhani Metal Corporation is a robust and reliable solution for protecting critical tube systems subjected to mechanical wear and thermal stress. Its excellent hardness and strength make it especially effective in applications involving high-velocity gas flow, abrasive particles, and fluctuating temperatures. While not suited for highly corrosive environments, SS 410 excels in systems where durability, cost-efficiency, and resistance to erosion are key priorities. With customizable sizing and expert engineering support, Ladhani Metal Corporation ensures dependable, application-specific shielding solutions for a wide range of industries. For technical specifications, fabrication assistance, or pricing inquiries, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are high-precision protective components designed to shield boiler and heat exchanger tubes from erosion, high-temperature scaling, and aggressive gas flows. Crafted from superior stainless steel alloys, these shields enhance equipment reliability and performance in demanding industrial conditions. SS 310 Half Round Tube Shield The SS 310 Half Round Tube Shield is a semi-circular metallic shield fabricated using premium stainless steel grade 310, known for its outstanding resistance to oxidation, scaling, and corrosion at elevated temperatures. This shield is specifically designed for use in environments involving extreme thermal cycling, aggressive combustion gases, and high mechanical stress. The half-round configuration ensures easy, secure installation over exposed tubes, forming a protective barrier that extends component life and reduces maintenance costs. Chemical Composition of SS 310 – Austenitic Stainless Steel • Carbon (C): ≤ 0.25% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.50% • Chromium (Cr): 24.0 – 26.0% • Nickel (Ni): 19.0 – 22.0% • Iron (Fe): Balance Uses : • Boiler Tube Protection – Shields boiler tubes from direct exposure to high-temperature flue gases, reducing metal loss due to oxidation and abrasive ash erosion in thermal power plants. • Heat Exchanger Tube Shielding – Provides a protective layer against high-temperature corrosion and flow-induced wear, preserving efficiency and reducing failure risks. • Furnace Tube Safeguarding – Resists flame impingement and scale buildup in industrial furnaces, extending the life of radiant and convection section tubes. • Petrochemical Process Protection – Used in reactors and reformers where exposure to hot process gases and thermal cycling can severely damage unprotected tubes. • Steam Superheater and Reheater Systems – Guards tubes from surface deterioration in high-pressure steam circuits, improving operational longevity and safety. Features : • High-Temperature Resistance – SS 310 maintains structural integrity at temperatures up to 1100°C, ideal for high-heat zones in boilers and furnaces. • Corrosion and Oxidation Resistance – Superior chromium and nickel content ensures excellent resistance to oxidation, scaling, and carburization even under continuous thermal exposure. • Precision Half-Round Design – Ensures a tight, secure fit on existing tube surfaces, enabling quick installation and easy replacement without interrupting system performance. • Custom Fabrication – Available in various thicknesses, lengths, and diameters to suit different tube sizes and geometries, with optional welding or clamping attachments. • Surface Finishing Options – Offered in bright annealed, pickled, or passivated finishes for enhanced appearance and additional surface protection. Applications : • Thermal Power Plants – Protects superheater and economizer tubes from soot erosion, slagging, and thermal stress caused by high-velocity flue gases. • Oil Refineries and Petrochemical Plants – Installed on high-temperature piping and reformer tubes exposed to corrosive gases, thermal cycling, and process variability. • Heat Recovery Steam Generators (HRSGs) – Enhances tube durability in combined-cycle plants where steam tubes face aggressive exhaust gas flow. • Chemical Processing Equipment – Applied in heat exchanger and reactor tubes that handle chemically reactive or acidic compounds at elevated temperatures. • Industrial Steam Boilers – Used in high-pressure steam systems across food, textile, pulp & paper, and marine industries to extend tube life and ensure safe operation. Conclusion The SS 310 Half Round Tube Shield by Ladhani Metal Corporation is a premium solution engineered for the most demanding high-temperature and corrosive environments. Its exceptional resistance to oxidation, scaling, and thermal fatigue makes it ideal for use in power plants, refineries, and process industries where tube protection is critical for safety and efficiency. By extending the life of boiler and heat exchanger tubes, reducing downtime, and minimizing repair costs, these shields offer long-term value and dependable performance. With custom sizing, precision fabrication, and strict quality control, Ladhani Metal Corporation delivers reliable shielding solutions tailored to meet the toughest industrial challenges. For technical inquiries, customization options, or to request a quote, please contact Ladhani Metal Corporation.

Ladhani Metal Corporation manufactures, supplies, and exports Boiler Tube Protection Shields and Bends in Stainless Steel and Special Alloy grades. These shields are engineered to protect boiler tubes, especially at bends and high-impact zones, from erosion, corrosion, oxidation, and soot blower damage. Designed as a sacrificial barrier, they extend tube life, minimize maintenance downtime, and ensure reliable performance in power plants, industrial boilers, WHRBs, and HRSGs. Function of Boiler Tube Protection Shield / Bend • Shields boiler tubes at bends and exposed areas against high-velocity flue gas erosion • Reduces damage from abrasive fly ash and soot blower jets • Provides resistance to high-temperature oxidation and corrosion • Extends service life of boiler components under extreme thermal and mechanical stress Available Grades Stainless Steel Grades: • SS 304 / SS 304L • SS 310 / SS 310S • SS 316 / SS 316L • SS 410 / SS 420 / SS 430 Special Alloy Grades: • 1Cr18Ni9Ti • Cr25Ni20 • 1Cr25Ni20Si2 • Cr23Ni13 • 1Cr20Ni14Si2 • 1Cr13 Applications • Power generation boilers – reheater, superheater, and economizer tube protection • Waste Heat Recovery Boilers (WHRBs) – erosion and oxidation resistance in flue gas zones • Heat Recovery Steam Generators (HRSGs) – shielding of critical bends and exposed sections • Petrochemical and process heaters – protection under aggressive thermal cycling • Industrial steam plants – durability in corrosive and erosive service Features • High corrosion and oxidation resistance at elevated temperatures • Effective barrier against erosive flue gas streams and ash particles • Precision-engineered design ensures accurate fit on tube bends • Manufactured in stainless steels and special alloys for diverse service conditions • Export-ready in a wide range of sizes, thicknesses, and bend profiles Conclusion Boiler Tube Protection Shields and Bends from Ladhani Metal Corporation are available in a comprehensive range of stainless steel and special alloy grades to suit demanding operating environments. Offering superior erosion and corrosion resistance, these shields ensure long-term boiler efficiency, reduced downtime, and extended tube life in both domestic and international markets. #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Muzaffarpur#halftubeshield #utypehalftubeshield #tubeshieldexporter #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier #SSShielding #IndustrialTubeShield #BoilerTubeGuard #CustomMetalParts #SteelIndustryIndia #MetalEngineering #HeavyIndustrySupply #StainlessSteelIndia #SteelExporters #MetalComponentExport #FabricatedProducts #SteelDealer #IndustrialSupplyIndia #BoilerTubeFittings #TubeShieldingSolutions #HalfTubeCover #HeatExchangerShield #HalfRoundReheaterShield #ReheaterTubeShield #BoilerReheaterProtection #PowerPlantTubeShield #BoilerErosionShield #SteamBoilerTubeShield #HighTempTubeShield #BoilerWearProtection#BoilerTubeProtection #BoilerTubeShield #BoilerBendShield #HalfRoundTubeShield #BoilerTubeWearProtection #PowerPlantTubeShield #BoilerTubeErosionShield #BoilerTubeProtectionShield #BoilerTubeSafety #BoilerTubeBendShield #IndustrialBoilerShield #SteamBoilerTubeProtection #HeatExchangerTubeShield #BoilerTubeGuard #BoilerTubeShielding

Ladhani Metal Corporation manufactures, supplies, and exports Boiler Tube Protection Shields and Bends, engineered to safeguard boiler tubes at critical sections such as bends, high-velocity flue gas zones, and soot blower impact areas. These shields are precision-formed to match the outer curvature of tubes, providing a sacrificial protective layer that prevents erosion, corrosion, oxidation, and localized tube thinning. By extending the service life of boiler tubes, they reduce unplanned shutdowns and maintenance costs while ensuring efficient operation of boilers, HRSGs, and heat recovery systems. Function of Boiler Tube Protection Shield / Bend • Protects tube bends and exposed surfaces from high-temperature erosion • Minimizes oxidation and corrosion damage in flue gas streams • Guards tubes from abrasive fly ash and soot blower jets • Extends operational reliability in high-stress boiler environments Available Grades Stainless Steel Grades • SS 304 / SS 304L • SS 310 / SS 310S • SS 316 / SS 316L • SS 410 / SS 420 / SS 430 Special Alloy Grades • 1Cr18Ni9Ti • Cr25Ni20 • 1Cr25Ni20Si2 • Cr23Ni13 • 1Cr20Ni14Si2 • 1Cr13 Applications • Power generation boilers – protection of tube bends in superheater and reheater sections • Waste Heat Recovery Boilers (WHRBs) – erosion resistance in high-velocity flue gas regions • Heat Recovery Steam Generators (HRSGs) – protection of critical bends in thermal cycles • Industrial boilers – extended life for tubes in erosive and corrosive service zones • Petrochemical and process heaters – reliable protection in high-temperature tube bends Features • Superior corrosion and oxidation resistance • High mechanical strength and thermal stability • Designed for precise fit on straight tubes and bends • Manufactured in a wide range of stainless steel and alloy grades • Long-lasting, low-maintenance tube protection solution Conclusion Boiler Tube Protection Shields and Bends from Ladhani Metal Corporation deliver robust protection for tubes operating under extreme thermal and erosive conditions. Available in multiple stainless steel and special alloy grades, these shields ensure longer tube life, reduced maintenance costs, and higher boiler efficiency in domestic and international power and industrial applications. #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Muzaffarpur#halftubeshield #utypehalftubeshield #tubeshieldexporter #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier #SSShielding #IndustrialTubeShield #BoilerTubeGuard #CustomMetalParts #SteelIndustryIndia #MetalEngineering #HeavyIndustrySupply #StainlessSteelIndia #SteelExporters #MetalComponentExport #FabricatedProducts #SteelDealer #IndustrialSupplyIndia #BoilerTubeFittings #TubeShieldingSolutions #HalfTubeCover #HeatExchangerShield #HalfRoundReheaterShield #ReheaterTubeShield #BoilerReheaterProtection #PowerPlantTubeShield #BoilerErosionShield #SteamBoilerTubeShield #HighTempTubeShield #BoilerWearProtection#BoilerTubeProtection #BoilerTubeShield #BoilerBendShield #HalfRoundTubeShield #BoilerTubeWearProtection #PowerPlantTubeShield #BoilerTubeErosionShield #BoilerTubeProtectionShield #BoilerTubeSafety #BoilerTubeBendShield #IndustrialBoilerShield #SteamBoilerTubeProtection #HeatExchangerTubeShield #BoilerTubeGuard #BoilerTubeShielding

Ladhani Metal Corporation manufactures, supplies, and exports SS Half Round Tube Sleeves designed to safeguard boiler tubes, reheater tubes, superheater tubes, and economizer tubes from erosion, corrosion, and high-temperature wear. These sleeves cover the exposed half portion of the tube that faces maximum impact from high-velocity flue gases, abrasive fly ash, and soot blower streams. By acting as a protective sacrificial barrier, SS Half Round Tube Sleeves significantly extend tube service life, reduce downtime, and ensure improved reliability of boilers and heat recovery systems. Function of SS Half Round Tube Sleeves • Provide resistance to erosion and localized tube thinning • Protect tubes from flue gas velocity, abrasive ash, and oxidation • Maintain mechanical strength at elevated temperatures • Enhance durability of steam generation equipment under harsh service conditions Available Grades Stainless Steel Grades • SS 304 / SS 304L • SS 310 / SS 310S • SS 316 / SS 316L • SS 410 / SS 420 / SS 430 Special Alloy Grades • 1Cr18Ni9Ti • Cr25Ni20 • 1Cr25Ni20Si2 • Cr23Ni13 • 1Cr20Ni14Si2 • 1Cr13 Applications • Power generation boilers – reheater, superheater, and economizer tube protection • Waste Heat Recovery Boilers (WHRBs) – resistance to high-velocity flue gases • Heat Recovery Steam Generators (HRSGs) – enhanced life under cyclic thermal stress • Industrial boilers – protection from abrasion and oxidation in critical tube sections • Petrochemical and process heaters – reliable protection in reheating zones Features • High corrosion and oxidation resistance • Excellent thermal stability and mechanical integrity • Low-maintenance, long service life solution • Available in a wide range of stainless steel and special alloy grades • Precision-engineered fit for exact tube curvature Conclusion SS Half Round Tube Sleeves by Ladhani Metal Corporation provide long-lasting erosion and corrosion protection for boiler tubes in demanding environments. With availability in multiple stainless steel and special alloy grades, these sleeves are suitable for global power plants, WHRBs, HRSGs, and industrial steam systems, ensuring extended equipment performance and reduced maintenance costs. #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Muzaffarpur#halftubeshield #utypehalftubeshield #tubeshieldexporter #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier #SSShielding #IndustrialTubeShield #BoilerTubeGuard #CustomMetalParts #SteelIndustryIndia #MetalEngineering #HeavyIndustrySupply #StainlessSteelIndia #SteelExporters #MetalComponentExport #FabricatedProducts #SteelDealer #IndustrialSupplyIndia #BoilerTubeFittings #TubeShieldingSolutions #HalfTubeCover #HeatExchangerShield #HalfRoundReheaterShield #ReheaterTubeShield #BoilerReheaterProtection #PowerPlantTubeShield #BoilerErosionShield #SteamBoilerTubeShield #HighTempTubeShield #BoilerWearProtection