Thank you for writing to us. One of our executive will reach back to you through your submitted medium. In case there’s an urgency, feel free to connect over WhatsApp for faster response.
Prefer calling? Dial +919029362692 (International callers) or +919029362692 (Indian callers).
Product Name: 8mm titanium plate
Material: Gr1 Gr2 Gr3 Gr4 Gr5 Gr7 Gr12 etc.
Standard: ASTM B265 ASME SB 265
Surface: Pickling, Polishing, Sand Blasting
Technique:Rolled, Forged
Unit Price: $15usd/kg-$48usd/kg
Thickness: 0.5-100mm
Length: 500-6000mm Or As You Require
Width: 500-1000mm Or As You Require
Product Introduction
Titaniu plates and titanium alloy plates are mainly used to manufacture various containers, reactors, heat exchangers, distillation towers, pipes, pumps and valves in the petrochemical machinery manufacturing industry. Titanium can be used as a titanium cathode and condenser in power stations, as well as environmental pollution control devices. The hardness of steel is higher than that of titanium plate, but the specific strength or tensile strength of titanium alloy is higher than that of high-quality steel. Titanium alloy has good heat resistance, low temperature toughness and fracture toughness, so it is mostly used as aircraft engine parts and rocket and missile structural parts. Titanium alloy can also be used as fuel and oxidant storage tanks and high-pressure vessels. There are already automatic rifles, mortar seat plates and recoilless gun launch tubes made of titanium alloy.
Product Name: 8mm titanium plate
Material: Gr1 Gr2 Gr3 Gr4 Gr5 Gr7 Gr12 etc.
Standard: ASTM B265 ASME SB 265
Surface: Pickling, Polishing, Sand Blasting
Technique:Rolled, Forged
Thickness: 0.5-60mm
Length: 500-6000mm Or As You Require
Width: 500-1000mm Or As You Require
Status and specifications of titanium plates
Grade Technique Status Thickness
Gr1 Gr2 Gr3 Gr4
(pure titanium plate)
Hot rolled Annealed 4.1-60mm
Cold rolled Annealed 0.3-4mm
Gr5 Gr7 Gr12 etc.
(Titanium alloy plate)
Hot rolled Annealed 4.1-60mm
Cold rolled Annealed 0.8-4.0mm
Product Name:Titanium weld neck flanges
Standard: ANSI / ASME B16.5
Material: Gr1 Gr2 Gr5 Gr7 Gr12
Unit Price: $25usd/pc-$85usd/pc
Sealing Surface: RF, FF, TG, RJ etc.
Size: NPS 1/2 - NPS 24(DN 10 - 2000)
Pressure: 150#-2500#
Surface: Polished
Technique: Forged and CNC Machined
Titanium Weld Neck Flanges
Titanium weld neck flanges are not easy to deform, have good sealing, and are widely used. They are suitable for pipelines with large fluctuations in pressure or temperature or high temperature, high pressure and low temperature pipelines. The advantage is that the price is low, and the nominal pressure does not exceed 2.5MPa. It is also used for transportation on pipelines with expensive, flammable and explosive media, and the nominal pressure is around PN16MPa.
Product Name: Pure titanium jigs For Electroplating
Material: Gr1, Gr2
Application: Electroplating, anodizing etc.
Size: Customized
Surface: Polished
Pure titanium jigs For Electroplating
Titanium fixtures and racks are mainly used in electroplating, anodizing and other industries. Anodizing fixtures are usually made of aluminum or titanium. The aluminum fixture is anodized after being used for a period of time and must be chemically cleaned. Continuous anodizing and stripping lead to short service life. Therefore, the titanium that does not need to be stripped after anodizing is used. Titanium has been widely used in a large number of applications.
Advantages of titanium jigs :
● titanium jigs, consistent from operation to operation.
● titanium fixtures and racks are not anodized like aluminum racks. Therefore, you can use your rectifier anodized parts instead of the rack.
● the high initial cost of titanium jig is offset by the advantages of titanium process savings, better consistency and longer service life.
Product name titanium anodizing rack/titanium jigs for anodizing
Material
Titanium Gr1 Gr2
Technology
Sand Blasting, Acid Washing
Dimension & Shape
Different dimension and shape is available,or according to customer's drawing
Parameter
Current density≤2000A/M2
Temperature<65°C
PH 0.1~14
Max content of Fluoride ion is 200PPM
Features
Superior electric catalytic property
Strong anti-corrosion property
High current efficiency property
Keep the operating voltage stably
Decrease the wastage of additive
Keep the plating solution stable
Long lifetime
Different complex geometry design
Applications
Ø Precious metal plating(Ag, Au, Rh, Pd)
Ø Hard chrome plating(Cr6+)
Ø Base metal plating(Cu, Zn, Ni)
Ø Precious metal recovery, etc.
Remarks
Titanium anode also called MMO anode,DSA & Insoluble anode
Cathode also be provided
Packing
Plywood case or carton, or according to customer’s demand
Titanium is a new metal, the performance of titanium is related to the content of carbon, nitrogen, hydrogen, oxygen and other impurities. The pure content of titanium iodide impurities does not exceed 0.1%, but its strength is low and plasticity is high. 99.5% of industrial pure titanium performance is: the rho = 4.5 g/cm3 density, melting point is 1725 ℃, coefficient of thermal conductivity of lambda = 15.24 W/(m.K), tensile strength of sigma b = 539 mpa, elongation delta = 25%, reduction of area bits = 25%, elastic modulus E = 1.078 x 105 mpa, hardness HB195
Product Name: Titanium Bar
Standard: ASTM B348
Material: GR1, GR2, GR5, GR7, GR12
Shape: Round, Square, Flat, Hex
Diameter: 6-350mm
Length: Max 6000mm
Surface: Bright
Product Information
Standard: ASTM B348, AMS 4928, ASTM F67,ASTM F136
Grade: GR1, GR2, GR4, GR5, GR5 ELI, GR7, GR12, GR23, TC11, TC21, Ti-15333, Ti-662 etc.
Russian Grade: BT1-100,BT1-0,BT6 etc.
Shape: Round, Square, Flat, Hex
Diameter: 3-350mm
Length: up to 6000mm, random length is also ok and the price is lower
Tolerance: H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per your requirements
Surface: Polishing, Pickling
Condition: R/M/Y
Features: 1. Not any defects free from cracks no pitting.
2. Two ends flatting making sure length tolerance and good looking.
Applications: water treatment, desalination, power generation, marine, aerospace, chemical processing, engine components, autometic parts, medical industry, sports equipment etc.
Size(mm)
Tolerance(mm)
Ovality(mm)
6.35 to 7.94
±0.13
0.20
7.94 to 11.11
±0.15
0.23
11.11 to 15.88
±0.18
0.25
15.88 to 22.22
±0.20
0.30
22.22 to 25.40
±0.23
0.33
25.40 to 28.58
±0.25
0.38
28.58 to 31.75
±0.28
0.41
31.75 to 34.92
±0.30
0.46
34.92 to 38.10
±0.36
0.53
38.10 to 50.80
±0.40
0.58
50.80 to 63.50
+0.79, − 0
0.58
63.50 to 88.90
+1.19, − 0
0.89
88.90 to 114.30
+1.59, − 0
1.17
Chat with us
Chat with us
