'10 carbon'

DIN 2576 Carbon Steel Flanges PN 10 are slip-on type flanges manufactured in accordance with the DIN 2576 standard, suitable for piping systems operating under low to moderate pressures. Made from high-quality carbon steel, these flanges offer good mechanical strength and are cost-effective solutions for a wide range of industrial applications where corrosion resistance is not the primary concern. The slip-on design allows easy fitting over the pipe and facilitates welding on both the inner and outer edges, ensuring reliable and leak-proof connections. Ladhani Metal Corporation is a reputed manufacturer and global supplier of carbon steel flanges, delivering components that comply with international quality and dimensional standards. DIN 2576 carbon steel flanges are widely used in general-purpose piping systems across industries such as oil and gas, power generation, HVAC, water treatment, and process industries. Pressure Rating: • PN 10 (10 bar / 145 psi): Suitable for use in low to medium pressure systems with stable operational demands. Flange Types: • Slip-On Flanges These flanges slide over the pipe end and are welded on both sides, allowing for simple installation and strong mechanical joints. • Flat Face (FF) Flanges Designed to mate with flat gaskets and flat surfaces, suitable for systems involving cast iron or non-metallic components. Carbon Steel Grades and Composition: Common Grades: • ASTM A105 (Forged Carbon Steel) • ASTM A516 Grade 70 (Pressure Vessel Quality Steel) • IS 2062 (Structural Carbon Steel) Typical Composition (ASTM A105): • Carbon (C): 0.35% max • Manganese (Mn): 0.60 – 1.05% • Phosphorus (P): 0.035% max • Sulfur (S): 0.040% max • Silicon (Si): 0.10 – 0.35% Applications: DIN 2576 carbon steel flanges are preferred in systems where high strength is required and the risk of corrosion is minimal or controlled through external protection (e.g., coatings or linings). Common applications include: • Oil and Gas Transmission Used in pipelines and flowlines where moderate pressures are involved. • Power Plants Suitable for steam, water, and air systems in thermal and hydroelectric power stations. • Water Treatment and Distribution Employed in clean water and wastewater systems, including pumping stations and storage tanks. • HVAC Systems Utilized in heating, ventilation, and air conditioning ducting and piping. • Chemical and Petrochemical Applied in non-corrosive fluid handling and auxiliary systems. • Structural and Fabrication Works Used in non-pressure retaining structural supports and frames. Key Features: • Manufactured to DIN 2576 standards • PN 10 pressure rating for medium-duty applications • Cost-effective and mechanically strong • Available in a variety of carbon steel grades • Slip-on design offers ease of installation and alignment • Flat face design compatible with flat gaskets and soft materials • Ideal for industrial sectors with controlled or minimal corrosion environments • Custom drilling, dimensions, and surface treatments available Conclusion: DIN 2576 Carbon Steel Flanges PN 10 by Ladhani Metal Corporation offer a practical and economical solution for low to moderate pressure piping systems. With reliable performance, ease of installation, and availability in various carbon steel grades, these flanges are suited for a broad range of applications in power, water, oil and gas, and infrastructure industries. For detailed specifications, material compatibility, or project-based orders, contact Ladhani Metal Corporation today.

DIN 2569 Carbon Steel Flanges PN 100 are precision-engineered welding neck flanges manufactured from high-strength carbon steel, designed to perform reliably in high-pressure and high-temperature industrial environments. Built to DIN 2569 standards, these flanges offer excellent mechanical strength, structural integrity, and thermal performance, making them ideal for use in industries such as oil and gas, power generation, petrochemical, construction, and general engineering. Ladhani Metal Corporation is a reputable manufacturer and exporter of carbon steel flanges, providing products that conform to stringent global standards. The welding neck design allows for permanent and high-integrity pipe connections, making these flanges particularly suitable for applications subject to pressure fluctuations, vibration, and thermal cycling. Pressure Rating: • PN 100 (100 bar / 1450 psi): Specifically designed for high-pressure systems that require reliable sealing, robust mechanical strength, and thermal endurance in demanding industrial conditions. Flange Types: • Welding Neck Flanges Provide a tapered hub for stress distribution, ideal for high-pressure piping systems. • Raised Face (RF) Flanges Facilitates efficient gasket compression and sealing under elevated pressure and temperature. • Flat Face (FF) Flanges Used for connections with flat-faced components or non-metallic sealing materials. • Forged Welding Neck Flanges Offer enhanced strength, dimensional accuracy, and pressure resistance. • Custom-Machined Flanges Available in a wide range of sizes, pressure classes, and carbon steel grades to meet specific project needs. Carbon Steel Grades and Composition: 1. ASTM A105 (Forged Carbon Steel) Composition: • Carbon (C): 0.35% max • Manganese (Mn): 0.60–1.05% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.040% • Silicon (Si): 0.10–0.35% Applications: Commonly used in pressure systems, valves, and flanges for oil and gas and general-purpose industrial applications where temperature and pressure are moderate to high. 2. ASTM A350 LF2 (Low Temperature Carbon Steel) Composition: • Carbon (C): ≤ 0.30% • Manganese (Mn): 0.60–1.35% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.040% • Silicon (Si): 0.15–0.30% Applications: Ideal for low-temperature service, particularly in cryogenic or arctic environments in oil refineries, LNG plants, and chemical processing. 3. ASTM A516 Grade 70 (Pressure Vessel Quality Carbon Steel) Composition: • Carbon (C): ≤ 0.30% • Manganese (Mn): 0.85–1.20% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.035% Applications: Used in boilers, pressure vessels, and heat exchangers where toughness and resistance to high-pressure and high-temperature conditions are essential. Applications of DIN 2569 Carbon Steel Flanges: • Oil and Gas Pipelines: Used for transporting crude oil, natural gas, and petroleum products under pressure. • Power Plants: Installed in steam lines, turbines, and heat recovery systems due to their thermal and mechanical reliability. • Petrochemical and Refinery Units: Applied in high-pressure processing systems and reactors. • Construction and Infrastructure: Used in water supply systems, fire protection networks, and structural piping. • HVAC and Mechanical Engineering: Employed in heating, ventilation, and air conditioning networks. Key Features: • Manufactured to DIN 2569 standard • Available in PN 100 pressure rating • High mechanical strength and impact resistance • Excellent weldability and structural integrity • Designed for permanent, high-pressure pipe connections • Supplied with test certificates, quality assurance documents, and traceability • Can be surface-treated with anti-corrosion coatings, galvanizing, or black painting Conclusion: DIN 2569 Carbon Steel Flanges PN 100 from Ladhani Metal Corporation are engineered to meet the demands of high-pressure industrial systems with strength, reliability, and cost-efficiency. Suitable for a wide range of applications across various sectors, these flanges are available in customizable sizes and material grades. For detailed specifications, bulk inquiries, or technical assistance, contact Ladhani Metal Corporation today

Ladhani Metal Corporation, a manufacturer, supplier, and exporter, offers stainless steel sheets, plates, and coils in grade X02Cr19Ni10 as per IS 6911 specifications. X02Cr19Ni10 is an ultra-low carbon austenitic stainless steel specially designed to provide superior resistance to intergranular corrosion even after welding. Its excellent combination of corrosion resistance, toughness, and weldability makes it a widely used stainless steel for critical industrial applications. Chemical Composition of X02Cr19Ni10 (as per IS 6911) • Carbon (C): 0.02% max • Manganese (Mn): 2.0% max • Silicon (Si): 1.0% max • Phosphorus (P): 0.045% max • Sulphur (S): 0.030% max • Chromium (Cr): 17.0% – 19.0% • Nickel (Ni): 9.0% – 11.0% Functions and Characteristics • Ultra-low carbon content prevents carbide precipitation during welding • Excellent resistance to intergranular corrosion and sensitization • Superior corrosion resistance in atmospheric and chemical environments • High ductility and toughness even at cryogenic temperatures • Non-magnetic in annealed condition; may become slightly magnetic after cold working • Excellent weldability and formability for fabrication of complex structures Applications • Power Generation – Condensers, heat exchangers, and boiler components • Oil and Gas – Offshore platforms, pipelines, and processing equipment • Petrochemical Industry – Reactors, process units, and refinery components • Fertilizer Plants – Tanks, vessels, and chemical-handling pipelines • Chemical Industry – Storage tanks, piping systems, and reactors • Marine Engineering – Shipbuilding, seawater systems, and offshore structures • Automotive Industry – Exhaust manifolds, trims, and high-performance components • Food Processing – Hygienic equipment, storage tanks, and kitchenware • Construction – Architectural facades, roofing, and structural frameworks • General Engineering – Fasteners, shafts, and machine parts requiring corrosion resistance Available Forms • Stainless steel sheets • Stainless steel plates • Stainless steel coils Grades Available under IS 6911 Apart from X02Cr19Ni10, IS 6911 also covers a wide range of stainless steel grades, including X04Cr12, X07Cr17, X12Cr12, X20Cr13, X30Cr13, X40Cr13, X15Cr16Ni2, X108Cr17Mo, X10Cr17Mn6Ni4N2O, X07Cr11Mn12Ni4, X10Cr18Mn9Ni5, X30Cr17Ni7, X07Cr18Ni9, X04Cr19Ni9, X15Cr24Ni13, X20Cr25Ni20, X04Cr17Ni12Mo2, X02Cr17Ni12Mo2, X04Cr17Ni12Mo2Ti, X04Cr18Ni10Ti, X04Cr18Ni10Nb and other specified grades. Conclusion IS 6911 SS X02Cr19Ni10 sheets, plates, and coils offered by Ladhani Metal Corporation, a manufacturer, supplier, and exporter, are the preferred choice for industries requiring excellent corrosion resistance, superior weldability, and toughness. With availability in multiple grades as per IS 6911, we deliver stainless steel solutions that meet both domestic and international standards. For inquiries or project requirements, contact Ladhani Metal Corporation. #Mumbai #Delhi #Chennai #Kolkata #Hyderabad #Bangalore #Pune #Ahmedabad #Surat #Rajkot #Vadodara #Coimbatore #Jaipur #Nagpur #Indore #Ludhiana #Kanpur #Bhubaneswar #Rourkela #Visakhapatnam #Trichy #Kochi #Mangalore #Jamnagar #Bharuch #Vapi #Hazira #Ankleshwar #Durgapur #Jamshedpur #Raipur #Bilaspur #Faridabad #Noida #Gurgaon #Chandigarh #Lucknow #Bhopal #Patna #Guwahati #Agra #Varanasi #Meerut #Ghaziabad #Moradabad #Aligarh #Aurangabad #Kolhapur #Nashik #Solapur #Thane #Amravati #Satara #Sangli #Hubli #Belgaum #Davangere #Mysore #Erode #Salem #Madurai #Tirunelveli #Tuticorin #Hosur #Nellore #Warangal #Karimnagar #Nanded #Udaipur #Ajmer #Jodhpur #Kota #Alwar #Gwalior #Rewa #Jhansi #IS6911sheetmanufacturer #IS6911sheet supplier # IS6911sheetexporter #IS6911 #IS6911StainlessSteel #IS6911Sheet #IS6911Plate #IS6911Coil #IS6911Strip #IS6911Manufacturer #IS6911Supplier #IS6911Exporter #StainlessSteelIndia #StainlessSteelSheet #StainlessSteelPlate #StainlessSteelCoil #StainlessSteelStrip #SS304 #SS304L #SS316 #SS316L #X04Cr12 #X07Cr17 #X12Cr12 #X20Cr13 #X30Cr13 #X40Cr13 #X15Cr16Ni2 #X108Cr17Mo #X07Cr18Ni9 #X04Cr19Ni9 #X02Cr19Ni10 #X15Cr24Ni13 #X20Cr25Ni20 #X04Cr17Ni12Mo2 #X02Cr17Ni12Mo2 #X04Cr17Ni12Mo2Ti #X04Cr18Ni10Ti #X04Cr18Ni10Nb #StainlessSteelGrades #StainlessSteelManufacturer #StainlessSteelSupplier #StainlessSteelExporter #StainlessSteelStockist #IndustrialStainlessSteel #BoilerStainlessSteel #PetrochemicalStainlessSteel #ChemicalIndustryStainlessSteel #MarineStainlessSteel #HeatResistantSteel #CorrosionResistantSteel #SSSheetsPlatesCoils #LadhaniMetalCorporation

Ladhani Metal Corporation, a manufacturer, supplier, and exporter, offers stainless steel sheets, plates, and coils in grade X02Cr19Ni10 as per IS 6911 specifications. X02Cr19Ni10 is an ultra-low carbon austenitic stainless steel grade, specifically designed to provide superior resistance to intergranular corrosion even after welding and exposure to high temperatures. Its excellent balance of strength, ductility, and corrosion resistance makes it one of the most versatile stainless steel grades used worldwide. Chemical Composition of X02Cr19Ni10 (as per IS 6911) • Carbon (C): 0.02% max • Manganese (Mn): 2.0% max • Silicon (Si): 1.0% max • Phosphorus (P): 0.045% max • Sulphur (S): 0.030% max • Chromium (Cr): 17.0% – 19.0% • Nickel (Ni): 9.0% – 11.0% Functions and Characteristics • Ultra-low carbon content prevents carbide precipitation during welding • Excellent resistance to intergranular and general corrosion • High toughness and strength, even at cryogenic temperatures • Superior weldability and formability for complex structures • Non-magnetic in annealed condition, slightly magnetic when cold worked • Retains oxidation resistance up to 870°C in intermittent service Applications • Power Generation – Boiler tubes, condensers, and heat exchangers • Oil and Gas – Offshore platforms, subsea pipelines, and storage vessels • Petrochemical Industry – Process plants, refinery units, and chemical reactors • Fertilizer Plants – Corrosion-resistant pipelines and equipment for chemical handling • Chemical Industry – Tanks, vessels, and process pipelines in aggressive environments • Marine Engineering – Seawater systems, shipbuilding, and offshore structures • Automotive Industry – Exhaust manifolds, trims, and structural parts • Food Processing – Hygienic equipment, kitchenware, and storage tanks • Construction – Architectural panels, roofing, and load-bearing structures • General Engineering – Shafts, fasteners, and components requiring toughness and corrosion resistance Available Forms • Stainless steel sheets • Stainless steel plates • Stainless steel coils Grades Available under IS 6911 Apart from X02Cr19Ni10, IS 6911 also covers a wide range of stainless steel grades, including X04Cr12, X07Cr17, X12Cr12, X20Cr13, X30Cr13, X40Cr13, X15Cr16Ni2, X108Cr17Mo, X10Cr17Mn6Ni4N2O, X07Cr11Mn12Ni4, X10Cr18Mn9Ni5, X30Cr17Ni7, X07Cr18Ni9, X04Cr19Ni9, X15Cr24Ni13, X20Cr25Ni20, X04Cr17Ni12Mo2, X02Cr17Ni12Mo2, X04Cr17Ni12Mo2Ti, X04Cr18Ni10Ti, X04Cr18Ni10Nb and other specified grades. Conclusion IS 6911 SS X02Cr19Ni10 sheets, plates, and coils offered by Ladhani Metal Corporation, a manufacturer, supplier, and exporter, provide excellent corrosion resistance, weldability, and toughness, making them ideal for industries such as chemical, petrochemical, marine, and food processing. With availability in multiple grades as per IS 6911, we deliver stainless steel solutions that meet both domestic and international standards. For inquiries or project requirements, contact Ladhani Metal Corporation. #Mumbai #Delhi #Chennai #Kolkata #Hyderabad #Bangalore #Pune #Ahmedabad #Surat #Rajkot #Vadodara #Coimbatore #Jaipur #Nagpur #Indore #Ludhiana #Kanpur #Bhubaneswar #Rourkela #Visakhapatnam #Trichy #Kochi #Mangalore #Jamnagar #Bharuch #Vapi #Hazira #Ankleshwar #Durgapur #Jamshedpur #Raipur #Bilaspur #Faridabad #Noida #Gurgaon #Chandigarh #Lucknow #Bhopal #Patna #Guwahati #Agra #Varanasi #Meerut #Ghaziabad #Moradabad #Aligarh #Aurangabad #Kolhapur #Nashik #Solapur #Thane #Amravati #Satara #Sangli #Hubli #Belgaum #Davangere #Mysore #Erode #Salem #Madurai #Tirunelveli #Tuticorin #Hosur #Nellore #Warangal #Karimnagar #Nanded #Udaipur #Ajmer #Jodhpur #Kota #Alwar #Gwalior #Rewa #Jhansi #IS6911sheetmanufacturer #IS6911sheet supplier # IS6911sheetexporter #IS6911 #IS6911StainlessSteel #IS6911Sheet #IS6911Plate #IS6911Coil #IS6911Strip #IS6911Manufacturer #IS6911Supplier #IS6911Exporter #StainlessSteelIndia #StainlessSteelSheet #StainlessSteelPlate #StainlessSteelCoil #StainlessSteelStrip #SS304 #SS304L #SS316 #SS316L #X04Cr12 #X07Cr17 #X12Cr12 #X20Cr13 #X30Cr13 #X40Cr13 #X15Cr16Ni2 #X108Cr17Mo #X07Cr18Ni9 #X04Cr19Ni9 #X02Cr19Ni10 #X15Cr24Ni13 #X20Cr25Ni20 #X04Cr17Ni12Mo2 #X02Cr17Ni12Mo2 #X04Cr17Ni12Mo2Ti #X04Cr18Ni10Ti #X04Cr18Ni10Nb #StainlessSteelGrades #StainlessSteelManufacturer #StainlessSteelSupplier #StainlessSteelExporter #StainlessSteelStockist #IndustrialStainlessSteel #BoilerStainlessSteel #PetrochemicalStainlessSteel #ChemicalIndustryStainlessSteel #MarineStainlessSteel #HeatResistantSteel #CorrosionResistantSteel #SSSheetsPlatesCoils #LadhaniMetalCorporation

Ladhani Metal Corporation, a manufacturer, supplier, and exporter, offers stainless steel sheets, plates, and coils in grade X10Cr18Mn9Ni5 as per IS 6911 specifications. X10Cr18Mn9Ni5 is an austenitic stainless steel grade with a balanced composition of chromium, manganese, and nickel, designed to provide excellent corrosion resistance, high strength, and superior toughness. The addition of manganese enhances mechanical properties, while nickel stabilizes the austenitic structure, making this grade suitable for critical industrial environments. Chemical Composition of X10Cr18Mn9Ni5 (as per IS 6911) • Carbon (C): 0.10% max • Manganese (Mn): 8.0% – 10.0% • Silicon (Si): 1.0% max • Phosphorus (P): 0.040% max • Sulphur (S): 0.030% max • Chromium (Cr): 17.0% – 19.0% • Nickel (Ni): 4.0% – 6.0% Functions and Characteristics • Excellent corrosion resistance in oxidizing and mildly reducing environments • Good resistance to intergranular corrosion and stress corrosion cracking • Manganese improves tensile strength and toughness • Retains mechanical properties at both high and low temperatures • Non-magnetic in the annealed condition with excellent weldability and formability Applications • Power Generation – Heat exchangers, boilers, and turbine components • Oil and Gas – Offshore platforms, pipelines, and subsea equipment • Petrochemical Industry – Process equipment, reactors, and refinery units • Fertilizer Plants – Components exposed to chemical corrosion and high wear • Chemical Industry – Storage tanks, pressure vessels, and process pipelines • Marine Engineering – Seawater systems, ship components, and offshore rigs • Automotive Industry – Exhaust systems, clamps, and high-performance components • Food Processing – Hygienic processing equipment and storage tanks • Construction – Structural frameworks, cladding, and architectural elements • General Engineering – Fasteners, shafts, and machine parts requiring toughness and durability Available Forms • Stainless steel sheets • Stainless steel plates • Stainless steel coils Grades Available under IS 6911 Apart from X10Cr18Mn9Ni5, IS 6911 also covers a wide range of stainless steel grades, including X04Cr12, X07Cr17, X12Cr12, X20Cr13, X30Cr13, X40Cr13, X15Cr16Ni2, X108Cr17Mo, X10Cr17Mn6Ni4N2O, X07Cr11Mn12Ni4, X30Cr17Ni7, X07Cr18Ni9, X04Cr19Ni9, X02Cr19Ni10, X15Cr24Ni13, X20Cr25Ni20, X04Cr17Ni12Mo2, X02Cr17Ni12Mo2, X04Cr17Ni12Mo2Ti, X04Cr18Ni10Ti, X04Cr18Ni10Nb and other specified grades. Conclusion IS 6911 SS X10Cr18Mn9Ni5 sheets, plates, and coils offered by Ladhani Metal Corporation, a manufacturer, supplier, and exporter, deliver a unique combination of high strength, toughness, and corrosion resistance, making them ideal for applications in marine, petrochemical, and power generation industries. With availability in multiple grades as per IS 6911, we provide stainless steel solutions that meet both domestic and international standards. For inquiries or project requirements, contact Ladhani Metal Corporation. #Mumbai #Delhi #Chennai #Kolkata #Hyderabad #Bangalore #Pune #Ahmedabad #Surat #Rajkot #Vadodara #Coimbatore #Jaipur #Nagpur #Indore #Ludhiana #Kanpur #Bhubaneswar #Rourkela #Visakhapatnam #Trichy #Kochi #Mangalore #Jamnagar #Bharuch #Vapi #Hazira #Ankleshwar #Durgapur #Jamshedpur #Raipur #Bilaspur #Faridabad #Noida #Gurgaon #Chandigarh #Lucknow #Bhopal #Patna #Guwahati #Agra #Varanasi #Meerut #Ghaziabad #Moradabad #Aligarh #Aurangabad #Kolhapur #Nashik #Solapur #Thane #Amravati #Satara #Sangli #Hubli #Belgaum #Davangere #Mysore #Erode #Salem #Madurai #Tirunelveli #Tuticorin #Hosur #Nellore #Warangal #Karimnagar #Nanded #Udaipur #Ajmer #Jodhpur #Kota #Alwar #Gwalior #Rewa #Jhansi #IS6911sheetmanufacturer #IS6911sheet supplier # IS6911sheetexporter #IS6911 #IS6911StainlessSteel #IS6911Sheet #IS6911Plate #IS6911Coil #IS6911Strip #IS6911Manufacturer #IS6911Supplier #IS6911Exporter #StainlessSteelIndia #StainlessSteelSheet #StainlessSteelPlate #StainlessSteelCoil #StainlessSteelStrip #SS304 #SS304L #SS316 #SS316L #X04Cr12 #X07Cr17 #X12Cr12 #X20Cr13 #X30Cr13 #X40Cr13 #X15Cr16Ni2 #X108Cr17Mo #X07Cr18Ni9 #X04Cr19Ni9 #X02Cr19Ni10 #X15Cr24Ni13 #X20Cr25Ni20 #X04Cr17Ni12Mo2 #X02Cr17Ni12Mo2 #X04Cr17Ni12Mo2Ti #X04Cr18Ni10Ti #X04Cr18Ni10Nb #StainlessSteelGrades #StainlessSteelManufacturer #StainlessSteelSupplier #StainlessSteelExporter #StainlessSteelStockist #IndustrialStainlessSteel #BoilerStainlessSteel #PetrochemicalStainlessSteel #ChemicalIndustryStainlessSteel #MarineStainlessSteel #HeatResistantSteel #CorrosionResistantSteel #SSSheetsPlatesCoils #LadhaniMetalCorporation

Ladhani Metal Corporation, a manufacturer, supplier, and exporter, offers stainless steel sheets, plates, and coils in grade X10Cr17Mn6Ni4N2O as per IS 6911 specifications. X10Cr17Mn6Ni4N2O is an austenitic stainless steel grade stabilized with nitrogen, manganese, and nickel, designed to deliver excellent corrosion resistance, high strength, and superior toughness. This grade is widely preferred in critical industries for its resistance to pitting, stress corrosion cracking, and oxidation. Chemical Composition of X10Cr17Mn6Ni4N2O (as per IS 6911) • Carbon (C): 0.10% max • Manganese (Mn): 5.5% – 7.5% • Silicon (Si): 1.0% max • Phosphorus (P): 0.040% max • Sulphur (S): 0.030% max • Chromium (Cr): 16.5% – 18.5% • Nickel (Ni): 3.5% – 5.5% • Nitrogen (N): 0.15% – 0.30% Functions and Characteristics • Provides excellent corrosion resistance in chloride-bearing and aggressive environments • Nitrogen improves strength, toughness, and resistance to localized corrosion • Manganese enhances mechanical strength and stabilizes the austenitic structure • Offers good resistance to stress corrosion cracking and intergranular corrosion • Non-magnetic in the annealed condition with superior weldability and formability Applications • Power Generation – Heat exchangers, condensers, and boiler parts • Oil and Gas – Offshore platforms, subsea equipment, and pipelines • Petrochemical Industry – Reactors, chemical processing units, and refineries • Fertilizer Plants – Equipment exposed to corrosive fertilizers and chemical solutions • Chemical Industry – Process vessels, storage tanks, and high-strength piping systems • Marine Engineering – Ship components, seawater systems, and offshore structures • Automotive Industry – Exhaust systems, catalytic converter parts, and structural components • Food Processing – Hygienic equipment, storage tanks, and machinery • Construction – Architectural cladding, structural elements, and heavy-duty fasteners • General Engineering – Shafts, fasteners, machine parts, and components exposed to corrosive media Available Forms • Stainless steel sheets • Stainless steel plates • Stainless steel coils Grades Available under IS 6911 Apart from X10Cr17Mn6Ni4N2O, IS 6911 also covers a wide range of stainless steel grades, including X04Cr12, X07Cr17, X12Cr12, X20Cr13, X30Cr13, X40Cr13, X15Cr16Ni2, X108Cr17Mo, X07Cr11Mn12Ni4, X10Cr18Mn9Ni5, X30Cr17Ni7, X07Cr18Ni9, X04Cr19Ni9, X02Cr19Ni10, X15Cr24Ni13, X20Cr25Ni20, X04Cr17Ni12Mo2, X02Cr17Ni12Mo2, X04Cr17Ni12Mo2Ti, X04Cr18Ni10Ti, X04Cr18Ni10Nb and other specified grades. Conclusion IS 6911 SS X10Cr17Mn6Ni4N2O sheets, plates, and coils offered by Ladhani Metal Corporation, a manufacturer, supplier, and exporter, deliver a combination of excellent corrosion resistance, high strength, and structural stability, making them suitable for marine, petrochemical, power generation, and chemical industries. With availability in multiple grades as per IS 6911, we provide stainless steel solutions that meet both domestic and international standards. For inquiries or project requirements, contact Ladhani Metal Corporation. #Mumbai #Delhi #Chennai #Kolkata #Hyderabad #Bangalore #Pune #Ahmedabad #Surat #Rajkot #Vadodara #Coimbatore #Jaipur #Nagpur #Indore #Ludhiana #Kanpur #Bhubaneswar #Rourkela #Visakhapatnam #Trichy #Kochi #Mangalore #Jamnagar #Bharuch #Vapi #Hazira #Ankleshwar #Durgapur #Jamshedpur #Raipur #Bilaspur #Faridabad #Noida #Gurgaon #Chandigarh #Lucknow #Bhopal #Patna #Guwahati #Agra #Varanasi #Meerut #Ghaziabad #Moradabad #Aligarh #Aurangabad #Kolhapur #Nashik #Solapur #Thane #Amravati #Satara #Sangli #Hubli #Belgaum #Davangere #Mysore #Erode #Salem #Madurai #Tirunelveli #Tuticorin #Hosur #Nellore #Warangal #Karimnagar #Nanded #Udaipur #Ajmer #Jodhpur #Kota #Alwar #Gwalior #Rewa #Jhansi #IS6911sheetmanufacturer #IS6911sheet supplier # IS6911sheetexporter #IS6911 #IS6911StainlessSteel #IS6911Sheet #IS6911Plate #IS6911Coil #IS6911Strip #IS6911Manufacturer #IS6911Supplier #IS6911Exporter #StainlessSteelIndia #StainlessSteelSheet #StainlessSteelPlate #StainlessSteelCoil #StainlessSteelStrip #SS304 #SS304L #SS316 #SS316L #X04Cr12 #X07Cr17 #X12Cr12 #X20Cr13 #X30Cr13 #X40Cr13 #X15Cr16Ni2 #X108Cr17Mo #X07Cr18Ni9 #X04Cr19Ni9 #X02Cr19Ni10 #X15Cr24Ni13 #X20Cr25Ni20 #X04Cr17Ni12Mo2 #X02Cr17Ni12Mo2 #X04Cr17Ni12Mo2Ti #X04Cr18Ni10Ti #X04Cr18Ni10Nb #StainlessSteelGrades #StainlessSteelManufacturer #StainlessSteelSupplier #StainlessSteelExporter #StainlessSteelStockist #IndustrialStainlessSteel #BoilerStainlessSteel #PetrochemicalStainlessSteel #ChemicalIndustryStainlessSteel #MarineStainlessSteel #HeatResistantSteel #CorrosionResistantSteel #SSSheetsPlatesCoils #LadhaniMetalCorporation

Ladhani Metal Corporation, a manufacturer, supplier, and exporter, offers stainless steel sheets, plates, and coils in grade X108Cr17Mo as per IS 6911 specifications. X108Cr17Mo is a high-carbon martensitic stainless steel grade with molybdenum addition, designed to provide superior hardness, wear resistance, and enhanced corrosion resistance. With its ability to retain high strength after heat treatment, this grade is well-suited for cutting tools, industrial blades, and applications requiring long-lasting durability. Chemical Composition of X108Cr17Mo (as per IS 6911) • Carbon (C): 0.95% – 1.20% • Manganese (Mn): 1.0% max • Silicon (Si): 1.0% max • Phosphorus (P): 0.040% max • Sulphur (S): 0.030% max • Chromium (Cr): 16.0% – 18.0% • Molybdenum (Mo): 0.90% – 1.30% Functions and Characteristics • Provides very high hardness and strength after hardening and tempering • Molybdenum addition enhances corrosion resistance and pitting resistance • Offers excellent wear resistance, making it ideal for blades and cutting tools • Magnetic in nature with good edge retention and toughness • Available in annealed, hardened, or tempered condition to meet diverse application needs Applications • Power Generation – High-wear turbine parts and steam-handling components • Oil and Gas – Shafts, valves, pump parts, and components exposed to corrosive fluids • Petrochemical Industry – Blades, knives, reactor parts, and heat exchanger components • Fertilizer Plants – Abrasion-resistant machinery and chemical-handling equipment • Chemical Industry – Cutting edges, processing equipment, and precision parts • Marine Engineering – Offshore and ship components requiring wear and corrosion resistance • Automotive Industry – Engine components, fasteners, clamps, and high-strength parts • Food Processing – Knives, blades, and wear-resistant cutting equipment • Construction – Structural applications demanding high hardness and durability • General Engineering – Tools, surgical instruments, and machine parts requiring edge retention Available Forms • Stainless steel sheets • Stainless steel plates • Stainless steel coils Grades Available under IS 6911 Apart from X108Cr17Mo, IS 6911 also covers a wide range of stainless steel grades, including X04Cr12, X07Cr17, X12Cr12, X20Cr13, X30Cr13, X40Cr13, X15Cr16Ni2, X10Cr17Mn6Ni4N2O, X07Cr11Mn12Ni4, X10Cr18Mn9Ni5, X30Cr17Ni7, X07Cr18Ni9, X04Cr19Ni9, X02Cr19Ni10, X15Cr24Ni13, X20Cr25Ni20, X04Cr17Ni12Mo2, X02Cr17Ni12Mo2, X04Cr17Ni12Mo2Ti, X04Cr18Ni10Ti, X04Cr18Ni10Nb and other specified grades. Conclusion IS 6911 SS X108Cr17Mo sheets, plates, and coils offered by Ladhani Metal Corporation, a manufacturer, supplier, and exporter, combine exceptional hardness, wear resistance, and improved corrosion resistance, making them suitable for industrial blades, tools, and heavy-duty engineering applications. With availability in multiple grades as per IS 6911, we provide solutions that meet both domestic and international standards. For inquiries or project requirements, contact Ladhani Metal Corporation. #Mumbai #Delhi #Chennai #Kolkata #Hyderabad #Bangalore #Pune #Ahmedabad #Surat #Rajkot #Vadodara #Coimbatore #Jaipur #Nagpur #Indore #Ludhiana #Kanpur #Bhubaneswar #Rourkela #Visakhapatnam #Trichy #Kochi #Mangalore #Jamnagar #Bharuch #Vapi #Hazira #Ankleshwar #Durgapur #Jamshedpur #Raipur #Bilaspur #Faridabad #Noida #Gurgaon #Chandigarh #Lucknow #Bhopal #Patna #Guwahati #Agra #Varanasi #Meerut #Ghaziabad #Moradabad #Aligarh #Aurangabad #Kolhapur #Nashik #Solapur #Thane #Amravati #Satara #Sangli #Hubli #Belgaum #Davangere #Mysore #Erode #Salem #Madurai #Tirunelveli #Tuticorin #Hosur #Nellore #Warangal #Karimnagar #Nanded #Udaipur #Ajmer #Jodhpur #Kota #Alwar #Gwalior #Rewa #Jhansi #IS6911sheetmanufacturer #IS6911sheet supplier # IS6911sheetexporter #IS6911 #IS6911StainlessSteel #IS6911Sheet #IS6911Plate #IS6911Coil #IS6911Strip #IS6911Manufacturer #IS6911Supplier #IS6911Exporter #StainlessSteelIndia #StainlessSteelSheet #StainlessSteelPlate #StainlessSteelCoil #StainlessSteelStrip #SS304 #SS304L #SS316 #SS316L #X04Cr12 #X07Cr17 #X12Cr12 #X20Cr13 #X30Cr13 #X40Cr13 #X15Cr16Ni2 #X108Cr17Mo #X07Cr18Ni9 #X04Cr19Ni9 #X02Cr19Ni10 #X15Cr24Ni13 #X20Cr25Ni20 #X04Cr17Ni12Mo2 #X02Cr17Ni12Mo2 #X04Cr17Ni12Mo2Ti #X04Cr18Ni10Ti #X04Cr18Ni10Nb #StainlessSteelGrades #StainlessSteelManufacturer #StainlessSteelSupplier #StainlessSteelExporter #StainlessSteelStockist #IndustrialStainlessSteel #BoilerStainlessSteel #PetrochemicalStainlessSteel #ChemicalIndustryStainlessSteel #MarineStainlessSteel #HeatResistantSteel #CorrosionResistantSteel #SSSheetsPlatesCoils #LadhaniMetalCorporation

Ladhani Metal Corporation offers SS 410 Half Round Tube Shields designed to safeguard boiler tubes in power plants, HRSGs, WHRBs, and industrial steam systems. Boiler tubes are exposed to continuous erosion, high-temperature flue gases, and abrasive ash particles that can shorten their service life. Manufactured from martensitic stainless steel grade SS 410, these shields provide high mechanical strength, moderate corrosion resistance, and reliable oxidation resistance, making them suitable for high-temperature boiler operations. Function of Boiler Tubes • Carry water or steam through heating sections of the boiler • Continuously exposed to erosion, oxidation, and abrasive flue gases • Require Half Round Tube Shields in high-velocity and soot blower impact zones Ladhani Metal Corporation manufactures, supplies, and exports SS 410 Half Round Tube Shields in various lengths, diameters, and thicknesses to meet both domestic and international requirements. SS 410 Grade Chemical Composition – Martensitic Stainless Steel • Carbon (C): 0.08 – 0.15% • Manganese (Mn): ≤ 1.00% • Phosphorus (P): ≤ 0.040% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 11.50 – 13.50% • Nickel (Ni): ≤ 0.75% • Iron (Fe): Balance Applications: Suitable for reheater and superheater sections in thermal power plants, waste heat recovery boilers, and industrial steam systems requiring high strength with moderate corrosion and oxidation resistance. Uses • Shields boiler tubes against erosion from high-velocity flue gases • Protects tubes from soot blower erosion and abrasive particles • Extends service life of steam circuit components in high-temperature boilers • Commonly used in utility boilers, WHRBs, HRSGs, and process boilers Features • High mechanical strength at elevated temperatures • Reliable oxidation resistance in hot boiler environments • Moderate corrosion resistance under steam and flue gas exposure • Cost-effective protection with precision-engineered fit Applications • Power generation boilers – Durable protection for reheater and superheater tubes • Waste heat recovery boilers – Guards tubes from high-velocity particle erosion • Industrial steam systems – Performs well in medium-to-high temperature conditions • Process boilers – Ensures extended operational life under erosive atmospheres Conclusion The SS 410 Half Round Tube Shield for Boiler Tubes by Ladhani Metal Corporation provides a strong, durable, and cost-effective solution for boiler tube protection in erosive and high-temperature environments. With high mechanical strength and reliable oxidation resistance, these shields extend tube life and minimize downtime. Available in a wide range of export-ready specifications, they are trusted by industries worldwide. For supply and technical inquiries, contact Ladhani Metal Corporation. #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Muzaffarpur#halftubeshield #utypehalftubeshield #tubeshieldexporter #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier #SSShielding #IndustrialTubeShield #BoilerTubeGuard #CustomMetalParts #SteelIndustryIndia #MetalEngineering #HeavyIndustrySupply #StainlessSteelIndia #SteelExporters #MetalComponentExport #FabricatedProducts #SteelDealer #IndustrialSupplyIndia #BoilerTubeFittings #TubeShieldingSolutions #HalfTubeCover #HeatExchangerShield #HalfRoundReheaterShield #ReheaterTubeShield #BoilerReheaterProtection #PowerPlantTubeShield #BoilerErosionShield #SteamBoilerTubeShield #HighTempTubeShield #BoilerWearProtection

Quality Standard Material No. Old designation DC01 DIN EN 10130 1.0330 ST 12-03 Cold-rolled flat steel DC01, according to the standards DIN EN 10130 and DIN EN 10152 Cold-rolled flat steel DC01 is a widely used material in the industrial sector, which is used for various applications in the cold forming process due to its excellent properties. The standards DIN EN 10130 and DIN EN 10152 are decisive for ensuring the quality and requirements of this material. DC01 according to the DIN EN 10130 standard The DIN EN 10130 standard defines the requirements for cold-rolled flat products made of unalloyed quality steels that are used in the cold forming process. Technical delivery conditions DIN EN 10130 specifies the technical delivery conditions for cold-rolled flat steel. These include the chemical composition, mechanical properties and surface quality. The standard ensures that the products supplied meet the required standards in order to guarantee workability and final quality. Chemical composition The chemical composition of the steel is decisive for its properties and is described in detail in DIN EN 10130. For DC01, the maximum carbon content is 0.12%, while the manganese and phosphorus content is also subject to specific limits. This composition ensures good cold formability and a high surface quality. Mechanical properties DC01 in accordance with DIN EN 10130 has specific mechanical properties that make it ideal for cold forming. These include a minimum tensile strength of 270-410 MPa and a minimum elongation of 28%. These properties allow the steel to be processed into complex shapes without cracking or breaking. Surface quality The surface quality is another aspect of DIN EN 10130. DC01 can be supplied in different surface finishes, such as smooth or matt. These variations allow adaptation to specific requirements of the end application, be it for decorative purposes or further coating processes. DC01+ZE according to the DIN EN 10152 standard The DIN EN 10152 standard extends the requirements of DIN EN 10130 to include specific conditions for electrolytically galvanized products. This standard is crucial for applications in which corrosion protection plays an important role. Technical delivery conditions DIN EN 10152 specifies the technical delivery conditions for electrolytically galvanized, cold-rolled flat products. In addition to the chemical composition and mechanical properties, these conditions also include the specific requirements for the zinc coating. Chemical composition and zinc coating The chemical composition of the base material DC01 generally remains unchanged, but an additional electrolytic zinc coating is applied. This coating is used for corrosion protection and varies in thickness depending on the specific requirements of the application. The standard provides detailed specifications for the thickness and uniformity of the zinc coating to ensure optimum protection. Mechanical properties Even with galvanized products, the mechanical properties of the base material are largely retained. The standard ensures that the cold formability and strength of the steel are not impaired despite the additional coating. Corrosion resistance and surface quality One of the main advantages of products manufactured in accordance with DIN EN 10152 is their improved corrosion resistance. Electrolytic galvanizing protects the steel from rust and thus increases the service life of the end product. The surface quality also plays a decisive role here and can be supplied in various finishes, such as smooth or textured. Conclusion Cold-rolled flat steel DC01, produced in accordance with the DIN EN 10130 and DIN EN 10152 standards, offers a number of advantages for applications in the cold forming process. While DIN EN 10130 defines the basic requirements for chemical composition, mechanical properties and surface quality, DIN EN 10152 extends these specifications to include specific conditions for electrolytically galvanized products that offer additional corrosion protection. Both standards together ensure that DC01 is a versatile material with high quality and durability. FOR EN 10130 DC01 CHEMICAL , MECHANICAL DATA SHEET KINDLY VISIT https://www.ladhanimetal.in/page/en-10130-2006-chemical-and-mechanical-composition/689c322d2e585e299cb43798 https://www.ladhanimetal.in/page/en-10130-cold-rolled-flat-sheet-plate-coil-data-sheet-equivalent-grade-and-chemical-and-mechanical-properties/68a45503fc14472bb274df32