Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are precision-engineered protective components designed to guard boiler and heat exchanger tubes from erosion, slag buildup, scaling, and high-temperature corrosion. These shields are widely used in power plants, petrochemical units, and thermal systems where tubes are exposed to hot gases, mechanical wear, and corrosive media. Their half-round structure ensures a secure fit over straight or curved tube sections, extending operational life and reducing tube failure. 1Cr18Ni9Ti U Type Outer Half Round Tube Shield The 1Cr18Ni9Ti U Type Outer Half Round Tube Shield is manufactured using a titanium-stabilized austenitic stainless steel known for its excellent corrosion resistance, high-temperature performance, and resistance to intergranular corrosion. This outer U-type shield is specifically designed to protect the external arc of U-bend tubes in boilers, heat exchangers, and superheaters where surface exposure to oxidizing gases and abrasive particles is common. Titanium stabilization improves weldability and structural integrity in high-temperature environments. • Outer U Type Half Round Tube Shield – Shields the outer curve of U-bend tubes from direct flame impingement, gas flow erosion, slag accumulation, and high-heat oxidation. Ladhani Metal Corporation is a reputable manufacturer, supplier, and exporter of 1Cr18Ni9Ti U Type Outer Half Round Tube Shields, offering durable and thermally stable solutions for critical industrial systems. Chemical Composition of 1Cr18Ni9Ti – Titanium-Stabilized Austenitic Stainless Steel • Carbon (C): ≤ 0.12% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 17.0 – 19.0% • Nickel (Ni): 8.0 – 11.0% • Titanium (Ti): ≥ 5 × C content • Iron (Fe): Balance Applications: Suitable for high-temperature, oxidizing, and corrosive environments where intergranular corrosion resistance and weldability are critical. Uses • Protection of outer U-bend surfaces in superheaters and reheaters of thermal and nuclear power plants • Shielding external arcs in waste heat recovery boilers (WHRBs) and HRSGs exposed to hot flue gases and ash particles • Applied in return bends of heat exchangers and reformers handling oxidizing and sulfur-bearing gases • Suitable for marine, petrochemical, and high-pressure steam systems requiring resistance to heat-induced corrosion • Used in welded applications where post-weld corrosion resistance and long-term structural stability are necessary Features • Excellent intergranular corrosion resistance – Titanium addition stabilizes carbon, preventing carbide precipitation during welding • High-temperature strength – Maintains structural integrity and oxidation resistance up to 850–900°C • Outer U-bend protection – Shields the most exposed and vulnerable arc from flame, thermal stress, and erosion • Precision engineering – Manufactured to exact tube radii and dimensions for a secure, movement-free installation • Easy to install – Can be mounted with clamps, stainless steel bands, or tack welds without dismantling the system • Long operational life – Reduces tube wear and thermal damage, improving overall system reliability Applications • power generation – Installed in superheater and reheater return bends exposed to thermal cycling and flue gas erosion • petrochemical plants – Protects U-bend tubes in reformers and exchangers from high-temperature and chemical degradation • waste heat recovery – Used in WHRBs and HRSGs to shield against slag buildup, scale formation, and high-velocity gas impact • marine and offshore systems – Suitable for condensers and heat exchangers exposed to salt-laden, oxidizing environments • industrial furnaces – Applied to radiant coils and return bends exposed to sustained heat and direct flame Conclusion The 1Cr18Ni9Ti U Type Outer Half Round Tube Shield by Ladhani Metal Corporation—manufacturer, supplier, and exporter—is a robust and thermally stable solution for protecting U-bend tube outer arcs in high-temperature and corrosive environments. With superior resistance to intergranular corrosion, oxidation, and thermal fatigue, this shield is ideal for boilers, heat exchangers, and petrochemical equipment requiring long-term protection and reliable performance. For technical consultation, custom orders, or quotations, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are precision-engineered protective components designed to shield exposed tubes in boilers, heat exchangers, and furnaces from erosion, corrosion, and high-temperature damage. These shields are vital in extending equipment life and minimizing unplanned maintenance in industrial systems operating under extreme heat and pressure. SS 310S Half Round Tube Shield The SS 310S Half Round Tube Shield is a semi-cylindrical cover manufactured from high-quality stainless steel grade 310S. It is specifically designed for high-temperature environments where oxidation, scaling, and corrosive gas exposure are common. The “S” in SS 310S indicates lower carbon content than standard SS 310, which improves weldability and reduces the risk of carbide precipitation during welding and high-temperature exposure. The half-round profile allows easy installation over the tube surface, ensuring a tight fit and reliable protection across thermal cycles and mechanical stresses. Chemical Composition of SS 310S – Austenitic Stainless Steel • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.50% • Chromium (Cr): 24.0 – 26.0% • Nickel (Ni): 19.0 – 22.0% • Iron (Fe): Balance Uses • Boiler Tube Protection – Protects boiler tubes from flue gas corrosion, abrasive wear, and scaling in high-temperature zones, especially in coal-fired and biomass plants. • Heat Exchanger Tube Shielding – Prevents erosion and chemical attack in steam and process gas exchangers, maintaining thermal efficiency. • Furnace Tube Protection – Shields tubes from direct flame impingement and high thermal loads in industrial furnaces, kilns, and incinerators. • Petrochemical and Refining Operations – Guards tubes in reformers, crackers, and reactors from carburization and oxidation in aggressive processing environments. • Superheater and Reheater Systems – Provides robust protection to tubes exposed to extreme thermal stress in high-pressure steam circuits. Features • High-Temperature Resistance – SS 310S withstands temperatures up to 1100°C continuously, making it suitable for severe service conditions. • Low Carbon Content – Enhanced weldability and reduced risk of intergranular corrosion during or after welding processes. • Half-Round Design – Engineered for precise fitment over existing tubes, allowing efficient installation and tube surface coverage. • Corrosion and Oxidation Resistance – Excellent resistance to high-temperature oxidizing environments and thermal scaling. • Custom Options – Available in multiple lengths, thicknesses, diameters, and with various mounting or clamping configurations. • Surface Finishes – Offered in pickled, passivated, and bright annealed finishes to match system requirements and aesthetics. Applications • Thermal Power Plants – Shields boiler tubes from soot blowers, slag, and hot gas erosion in economizers and superheaters. • Refineries and Petrochemical Plants – Applied to tubes in cracking furnaces and heat recovery systems to resist high-temperature corrosion. • Heat Recovery Steam Generators (HRSGs) – Enhances tube life in combined-cycle systems where exhaust gases impact tube bundles. • Chemical Processing Facilities – Protects process tubes in aggressive thermal and chemical environments including acid and gas streams. • Industrial Boilers and Steam Systems – Ensures longevity of steam lines and tubing in high-pressure, high-temperature operations across various sectors. • Marine and Offshore Installations – Withstands corrosive sea air and high thermal loads in shipboard and platform boiler systems. Conclusion The SS 310S Half Round Tube Shield by Ladhani Metal Corporation delivers a high-performance solution for tube protection in extreme thermal and corrosive environments. Its low carbon composition ensures superior weldability and resistance to intergranular attack, making it a preferred choice for welded systems and continuous high-temperature applications. These shields reduce wear, enhance equipment life, and lower maintenance costs in power generation, refining, chemical, and marine industries. With customizable dimensions, high-grade material quality, and precision engineering, Ladhani Metal Corporation is your trusted partner for robust and reliable tube shielding solutions. For technical assistance, custom fabrication, or a quotation tailored to your application, please contact Ladhani Metal Corporation

DIN 2633 titanium flanges PN 16 are precision-engineered weld neck flanges manufactured in accordance with the DIN 2633 standard. These flanges are designed for medium to high-pressure applications up to 16 bar (232 psi), delivering strong, lightweight, and corrosion-resistant connections in highly demanding pipeline environments. Constructed from premium-grade titanium alloys such as Grade 2 and Grade 5, they offer unmatched corrosion resistance, low density, and excellent mechanical properties, making them ideal for aggressive and weight-sensitive industrial applications. Ladhani Metal Corporation is a globally recognized manufacturer and supplier of titanium flanges, known for its technical expertise, product reliability, and adherence to stringent international specifications. Each flange undergoes meticulous quality checks to meet all applicable safety and performance standards. Pressure Rating: • PN 16 (16 bar / 232 psi): Designed for pipeline systems requiring secure, leak-free connections and outstanding corrosion protection under moderate pressure conditions. Flange Type: • Weld Neck Flanges Designed with an extended tapered hub to ensure superior structural support and reduce localized stress. Ideal for critical piping systems where fatigue resistance is essential. • Flat Face (FF) Flanges Provides an even sealing surface for use with softer gaskets or systems involving cast components, ensuring leak-proof performance and consistent compression. Titanium Grades and Full Composition: Titanium Grade 2 • Titanium (Ti): ≥ 98.8% • Iron (Fe): ≤ 0.30% • Oxygen (O): ≤ 0.25% • Carbon (C): ≤ 0.08% • Nitrogen (N): ≤ 0.03% • Hydrogen (H): ≤ 0.015% Applications: Preferred in desalination, chemical processing, marine, and medical applications due to its excellent corrosion resistance and biocompatibility. Titanium Grade 5 (Ti-6Al-4V) • Titanium (Ti): Balance • Aluminum (Al): 5.5 – 6.75% • Vanadium (V): 3.5 – 4.5% • Iron (Fe): ≤ 0.40% • Oxygen (O): ≤ 0.20% • Carbon (C): ≤ 0.08% • Nitrogen (N): ≤ 0.05% • Hydrogen (H): ≤ 0.015% Applications: Commonly used in aerospace, offshore, automotive, and industrial systems requiring high strength-to-weight ratio, fatigue resistance, and temperature stability. Applications of DIN 2633 Titanium Flanges PN 16: • Desalination Plants Highly resistant to seawater and chlorides, suitable for intake and discharge piping. • Chemical and Pharmaceutical Industries Used in handling reactive or highly corrosive media where stainless steel may fail. • Aerospace and Defense Ideal for weight-sensitive applications requiring structural integrity and resistance to atmospheric conditions. • Oil and Gas Reliable in offshore platforms and downhole equipment exposed to saltwater and high pressures. • Medical Equipment Manufacturing Biocompatible properties allow safe usage in hygienic and sterile processing systems. Key Features: • Precision manufactured to DIN 2633 specifications • PN 16 pressure rating for medium to high-pressure performance • Weld neck flange design ensures enhanced mechanical stability • Available in corrosion-resistant titanium grades 2 and 5 • Lightweight construction reduces overall system load • High resistance to acids, chlorides, and extreme environments • Custom dimensions, pressure classes, and finishes available on request Conclusion: DIN 2633 Titanium Flanges PN 16 from Ladhani Metal Corporation provide a high-performance solution for systems that require excellent corrosion resistance, mechanical strength, and reduced weight. With superior manufacturing precision and quality assurance, these flanges are suited for challenging environments in marine, aerospace, chemical, and medical sectors. For custom specifications, detailed technical assistance, or pricing inquiries, contact Ladhani Metal Corporation today.

DIN 2576 Carbon Steel Flanges PN 10 are slip-on type flanges manufactured in accordance with the DIN 2576 standard, suitable for piping systems operating under low to moderate pressures. Made from high-quality carbon steel, these flanges offer good mechanical strength and are cost-effective solutions for a wide range of industrial applications where corrosion resistance is not the primary concern. The slip-on design allows easy fitting over the pipe and facilitates welding on both the inner and outer edges, ensuring reliable and leak-proof connections. Ladhani Metal Corporation is a reputed manufacturer and global supplier of carbon steel flanges, delivering components that comply with international quality and dimensional standards. DIN 2576 carbon steel flanges are widely used in general-purpose piping systems across industries such as oil and gas, power generation, HVAC, water treatment, and process industries. Pressure Rating: • PN 10 (10 bar / 145 psi): Suitable for use in low to medium pressure systems with stable operational demands. Flange Types: • Slip-On Flanges These flanges slide over the pipe end and are welded on both sides, allowing for simple installation and strong mechanical joints. • Flat Face (FF) Flanges Designed to mate with flat gaskets and flat surfaces, suitable for systems involving cast iron or non-metallic components. Carbon Steel Grades and Composition: Common Grades: • ASTM A105 (Forged Carbon Steel) • ASTM A516 Grade 70 (Pressure Vessel Quality Steel) • IS 2062 (Structural Carbon Steel) Typical Composition (ASTM A105): • Carbon (C): 0.35% max • Manganese (Mn): 0.60 – 1.05% • Phosphorus (P): 0.035% max • Sulfur (S): 0.040% max • Silicon (Si): 0.10 – 0.35% Applications: DIN 2576 carbon steel flanges are preferred in systems where high strength is required and the risk of corrosion is minimal or controlled through external protection (e.g., coatings or linings). Common applications include: • Oil and Gas Transmission Used in pipelines and flowlines where moderate pressures are involved. • Power Plants Suitable for steam, water, and air systems in thermal and hydroelectric power stations. • Water Treatment and Distribution Employed in clean water and wastewater systems, including pumping stations and storage tanks. • HVAC Systems Utilized in heating, ventilation, and air conditioning ducting and piping. • Chemical and Petrochemical Applied in non-corrosive fluid handling and auxiliary systems. • Structural and Fabrication Works Used in non-pressure retaining structural supports and frames. Key Features: • Manufactured to DIN 2576 standards • PN 10 pressure rating for medium-duty applications • Cost-effective and mechanically strong • Available in a variety of carbon steel grades • Slip-on design offers ease of installation and alignment • Flat face design compatible with flat gaskets and soft materials • Ideal for industrial sectors with controlled or minimal corrosion environments • Custom drilling, dimensions, and surface treatments available Conclusion: DIN 2576 Carbon Steel Flanges PN 10 by Ladhani Metal Corporation offer a practical and economical solution for low to moderate pressure piping systems. With reliable performance, ease of installation, and availability in various carbon steel grades, these flanges are suited for a broad range of applications in power, water, oil and gas, and infrastructure industries. For detailed specifications, material compatibility, or project-based orders, contact Ladhani Metal Corporation today.

DIN 2576 Super Duplex Flanges PN 10 are high-performance, slip-on flanges manufactured from super duplex stainless steel, designed for piping systems operating under low to medium pressures. Produced in accordance with the DIN 2576 standard, these flanges offer exceptional mechanical strength combined with superior corrosion resistance, making them ideal for highly aggressive and chloride-laden environments. The slip-on design facilitates easy placement over the pipe and enables secure welding, ensuring precise alignment and a reliable seal across various industrial applications. Ladhani Metal Corporation is a trusted manufacturer and global supplier of super duplex steel flanges, providing products that meet stringent international standards in terms of dimensions, metallurgy, and performance. DIN 2576 super duplex flanges are especially valued in industries where resistance to pitting, crevice corrosion, and stress corrosion cracking is critical, including marine, chemical, and wastewater systems. Pressure Rating: • PN 10 (10 bar / 145 psi): Designed for moderate-pressure systems demanding long-term durability in corrosive environments. Flange Types: • Slip-On Flanges These flanges slide over the pipe and are welded on both sides, offering ease of installation and secure mechanical performance. • Flat Face (FF) Flanges Designed for use with flat gaskets and mating surfaces, these flanges are ideal for applications involving non-metallic or cast components. Super Duplex Stainless Steel Grades and Composition: Super Duplex 2507 (UNS S32750) Composition: • Chromium (Cr): 24.0 – 26.0% • Nickel (Ni): 6.0 – 8.0% • Molybdenum (Mo): 3.0 – 5.0% • Nitrogen (N): 0.24 – 0.32% • Iron (Fe): Balance Applications: Super Duplex 2507 delivers superior yield strength and corrosion resistance, particularly in extreme environments. It is commonly used in subsea equipment, chemical containment, high-pressure systems, and offshore platforms exposed to seawater and chlorides. Applications of DIN 2576 Super Duplex Flanges: • Offshore and Marine Engineering Well-suited for seawater cooling systems, risers, and structural elements exposed to marine conditions. • Chemical and Petrochemical Industries Ideal for conveying highly corrosive fluids, acids, and chlorides in reactors and pipelines. • Water Treatment and Desalination Applied in reverse osmosis systems, brine piping, and high-salinity water circuits requiring enhanced corrosion resistance. • Pulp and Paper Industry Offers protection against aggressive bleaching agents and chemical fluids under pressurized conditions. • Oil and Gas Used in critical systems like separators, manifolds, and sour gas applications. • Structural and Pressure Vessel Fabrication Preferred for tanks and pressure vessels operating under corrosive and mechanical stress. Key Features: • Fully compliant with DIN 2576 standard specifications • PN 10 pressure rating for use in moderate-pressure applications • Superior resistance to chloride-induced pitting, crevice corrosion, and stress corrosion cracking • High mechanical strength reduces material thickness and overall system weight • Manufactured using Super Duplex 2507 and other super duplex alloys • Slip-on design ensures straightforward alignment and welding • Flat face variants suitable for a wide range of gaskets and connection types • Widely used across marine, chemical, oil and gas, and water treatment sectors • Custom sizes, face configurations, and finishes available on request Conclusion: DIN 2576 Super Duplex Flanges PN 10 by Ladhani Metal Corporation offer exceptional strength and corrosion resistance for highly demanding industrial environments. Available in Super Duplex 2507 and other super duplex grades, these flanges ensure reliable performance in systems facing high salinity, pressure, and temperature. For technical guidance, grade selection, or customized project solutions, reach out to Ladhani Metal Corporation today.

DIN 2576 Duplex Flanges PN 10 are robust, slip-on flanges engineered from duplex stainless steel, designed for piping systems operating under low to medium pressures. Manufactured according to the DIN 2576 standard, these flanges combine high mechanical strength with excellent corrosion resistance, particularly in chloride-rich and aggressive chemical environments. The slip-on configuration allows for simple positioning over the pipe and secure welding, ensuring accurate alignment and strong sealing integrity in a variety of industrial applications. Ladhani Metal Corporation is a renowned manufacturer and global exporter of duplex steel flanges, offering products that conform to international specifications in terms of dimensions, metallurgy, and performance. DIN 2576 duplex flanges are especially valued in industries requiring resistance to pitting, crevice corrosion, and stress corrosion cracking, including offshore, chemical, and wastewater systems. Pressure Rating: • PN 10 (10 bar / 145 psi): Suitable for moderate-pressure systems requiring long-term performance in harsh environments. Flange Types: • Slip-On Flanges Designed to slide over the pipe and be welded on both sides, these flanges offer easy installation and secure mechanical integrity. • Flat Face (FF) Flanges Used in conjunction with flat gaskets and flat mating surfaces, ideal for connections involving non-metallic or cast components. Duplex Stainless Steel Grades and Composition: Duplex 2205 (UNS S32205 / S31803) Composition: • Chromium (Cr): 21.0 – 23.0% • Nickel (Ni): 4.5 – 6.5% • Molybdenum (Mo): 2.5 – 3.5% • Nitrogen (N): 0.14 – 0.20% • Iron (Fe): Balance Applications: Duplex 2205 offers twice the yield strength of conventional stainless steels with superior resistance to chloride-induced corrosion. Common applications include chemical processing, desalination, marine systems, and structural components in offshore platforms. Applications of DIN 2576 Duplex Flanges: • Offshore and Marine Engineering Ideal for seawater cooling systems, risers, and structural supports exposed to harsh marine environments. • Chemical and Petrochemical Industries Used in systems handling aggressive acids, chlorides, and solvents where standard stainless steels are insufficient. • Water Treatment and Desalination Applied in brine systems, high-salinity piping, and reverse osmosis plants for their resistance to pitting and scaling. • Pulp and Paper Industry Resists corrosion from bleaching chemicals and process fluids under high pressure. • Oil and Gas Suitable for pressure control systems, separators, and sour service applications. • Structural and Pressure Vessel Fabrication Used in tanks, pressure vessels, and piping subjected to mechanical and corrosive stress. Key Features: • Compliant with DIN 2576 standards • PN 10 pressure rating for moderate-pressure use • Excellent resistance to chloride stress corrosion, pitting, and crevice corrosion • High strength-to-weight ratio, reducing component size and cost • Available in Duplex 2205, Super Duplex 2507, and other custom grades • Slip-on design ensures quick and accurate pipe connections • Flat face options compatible with a variety of gaskets and materials • Ideal for chemical, marine, oil and gas, and water treatment sectors • Custom dimensions, face types, and surface finishes available Conclusion: DIN 2576 Duplex Flanges PN 10 from Ladhani Metal Corporation provide outstanding durability and corrosion resistance for challenging industrial environments. With availability in Duplex 2205 and Super Duplex 2507, these flanges are a reliable solution for systems exposed to high chlorides, pressure, and temperature. For technical specifications, grade selection, or project-specific orders, contact Ladhani Metal Corporation today.

DIN 2576 Stainless Steel Flanges PN 10 are high-quality, slip-on flanges manufactured from corrosion-resistant stainless steel, designed for use in low to medium-pressure piping systems. Produced according to the DIN 2576 standard, these flanges offer reliable sealing, ease of installation, and long-term durability in environments involving water, steam, air, oil, and chemical fluids. The slip-on design allows the flange to slide over the pipe and be welded into place, ensuring accurate alignment and structural integrity in a wide range of industrial applications. Ladhani Metal Corporation is a recognized manufacturer and global exporter of stainless steel flanges, delivering products that meet international quality, dimensional, and performance standards. DIN 2576 flanges provide excellent mechanical strength and corrosion resistance, making them ideal for use in chemical plants, water treatment systems, and general process industries. Pressure Rating: • PN 10 (10 bar / 145 psi): Designed for systems operating under low to moderate pressure, offering dependable performance in industrial fluid and gas transport. Flange Types: • Slip-On Flanges Designed to slip over the pipe and be welded on both the inside and outside, these flanges provide easy installation and solid structural support. • Flat Face (FF) Flanges Used with flat gaskets and flat mating surfaces to ensure even gasket compression and proper load distribution, especially when joining with non-metallic components or cast iron. Stainless Steel Grades and Composition: Stainless Steel 304 (UNS S30400) Composition: • Chromium (Cr): 18.0 – 20.0% • Nickel (Ni): 8.0 – 10.5% • Carbon (C): ≤ 0.08% • Manganese (Mn), Silicon (Si), Phosphorus (P), Sulfur (S): Trace amounts • Iron (Fe): Balance Applications: 304 stainless steel offers good corrosion resistance, formability, and weldability, making it suitable for applications in food processing, water piping, and light chemical handling. Stainless Steel 316 (UNS S31600) Composition: • Chromium (Cr): 16.0 – 18.0% • Nickel (Ni): 10.0 – 14.0% • Molybdenum (Mo): 2.0 – 3.0% • Carbon (C): ≤ 0.08% • Iron (Fe): Balance Applications: 316 stainless steel is ideal for more aggressive environments, offering superior resistance to chlorides, acids, and marine exposure. Common applications include chemical plants, pharmaceutical systems, and marine piping. Stainless Steel 321 (UNS S32100) Composition: • Chromium (Cr): 17.0 – 19.0% • Nickel (Ni): 9.0 – 12.0% • Titanium (Ti): ≥ 5x(C) minimum • Carbon (C): ≤ 0.08% • Iron (Fe): Balance Applications: 321 stainless steel is stabilized with titanium to resist intergranular corrosion after welding. It is commonly used in high-temperature applications such as exhaust systems, heat exchangers, furnace parts, and thermal fluid piping in the chemical and petrochemical industries. Applications of DIN 2576 Stainless Steel Flanges: • Chemical and Petrochemical Industries Used in piping systems that handle corrosive chemicals, acids, and solvents, ensuring safe and long-lasting operation. • Water Treatment and Distribution Widely used in pipelines for potable water, wastewater, and desalination plants due to their corrosion resistance and hygienic properties. • Food and Beverage Processing Ideal for sanitary fluid handling systems, where stainless steel ensures contamination-free and easy-to-clean connections. • Marine and Offshore Applications Suitable for piping exposed to seawater and atmospheric corrosion, especially in deck and ballast systems. • General Industrial Use Used in heating systems, compressed air lines, fire protection networks, and process piping. • High-Temperature Services Grade 321 stainless steel is preferred in applications involving thermal cycling and continuous elevated temperatures, such as refinery piping and power plant components. Key Features: • Manufactured according to DIN 2576 standard • PN 10 pressure rating for low to medium-pressure systems • Excellent corrosion resistance and mechanical strength • Available in stainless steel 304, 316, 321, and other grades • Slip-on design ensures easy welding and alignment • Flat face options available for specific gasket and joint requirements • Suitable for chemical, marine, thermal, and general industrial applications • Available in customized sizes, face types, and surface finishes Conclusion: DIN 2576 Stainless Steel Flanges PN 10 from Ladhani Metal Corporation provide reliable, corrosion-resistant performance for a wide range of industrial systems operating under moderate pressure. For technical support, material selection, or custom orders, contact Ladhani Metal Corporation today. 📞 Contact Ladhani Metal Corporation Website: https://www.ladhanimetal.in/ https://www.ladhanimetal.com/ Email: info@ladhanimetals.com Request a Quote: Custom dimensions, materials, and finishes available upon request.

DIN 2543 refers to a standard for titanium flanges under the German DIN (Deutsches Institut für Normung) system. Titanium flanges are designed for use in piping systems, connecting pipes, valves, pumps, and other equipment. They provide a secure method of joining pipes while allowing for easy disassembly when needed. These flanges are made from titanium or titanium alloys, which are known for their strength, corrosion resistance, and lightweight properties. Titanium is particularly advantageous in harsh environments such as marine, chemical processing, and high-temperature systems due to its resistance to oxidation and corrosion. Key Features: Material: Titanium or titanium alloys Corrosion Resistance: Excellent resistance to corrosion in various environments, particularly in acidic or saline conditions. Strength-to-weight ratio: Higher strength-to-weight ratio than steel. Temperature Tolerance: Titanium flanges can handle high temperatures and extreme conditions. Lightweight: Titanium is significantly lighter than steel, making transportation and handling easier. Pressure Rating (PN16):The "PN" (Pressure Nominal) value indicates the maximum pressure the flange can withstand at a specific temperature (typically 20°C).PN16 means the flange is rated for a maximum pressure of 16 bar (or 232 psi). Standard Flange Design: DIN 2543 titanium flanges follow a standardized design which includes: Type: Usually weld neck, slip-on, blind, or socket weld. Size: Flanges come in various sizes with different pressure ratings. Bolt Holes: They have drilled holes for bolts to connect to the mating flange. Face Type: Can be raised face, flat face, or RTJ (Ring Type Joint) depending on the application. Types of Titanium Flanges (According to DIN 2543): Weld Neck Flanges (WN): Ideal for high-pressure systems. Slip-on Flanges (SO): Easy to install, used for general applications. Blind Flanges (BL): Used to seal the end of a pipeline. Socket Weld Flanges (SW): Used for small bore applications. Lap Joint Flanges (LJ): Used with a stub end, providing easier alignment and disassembly Grades of Titanium Used for Flanges: Grade 2 (CP-Titanium - Commercially Pure Titanium): Composition: 99.2% pure titanium. Properties: Excellent corrosion resistance, moderate strength, highly ductile, good weldability. Grade 5 (Ti-6Al-4V - Titanium Alloy): Composition: 90% Titanium, 6% Aluminum, 4% Vanadium. Properties: High strength, excellent corrosion resistance, good fatigue strength, and slightly more difficult to weld. Conclusion: Grade 2 is ideal for applications requiring excellent corrosion resistance and ease of fabrication, while Grade 5 provides superior strength and is used in demanding applications like aerospace and high-performance industrial systems. Both grades offer excellent properties for titanium flanges used in a wide variety of industries. we also deal in various material in DIN2543 such at Stainless steel, duplex, super duplex, Inconel, Monel and carbon steel

DIN 2527 Monel Blind Flanges are critical components used in piping systems to seal the open ends of pipes, vessels, or equipment when no further connection is needed. These blind flanges are made from Monel alloys, a group of nickel-copper-based alloys known for their exceptional corrosion resistance, especially in harsh marine and chemical environments. Monel flanges, manufactured to the DIN 2527 standard, ensure superior strength and reliability in demanding applications, making them ideal for industries such as chemical processing, marine, and power generation. Material Composition of Monel Alloys: Monel alloys are primarily composed of Nickel (Ni) and Copper (Cu), along with small amounts of other elements such as iron, manganese, and silicon. Two of the most commonly used Monel alloys in blind flange production are: Monel 400: Nickel (Ni): 63% Copper (Cu): 28-34% Iron (Fe): 2.5% max Manganese (Mn): 2.0% max Silicon (Si): 0.5% max Carbon (C): ≤ 0.30% Sulfur (S): ≤ 0.024% Monel K-500: Nickel (Ni): 63% Copper (Cu): 28% Aluminum (Al): 2.3-3.1% Titanium (Ti): 0.35-0.85% Iron (Fe): 2.5% max Manganese (Mn): 1.0% max Silicon (Si): 0.5% max Carbon (C): ≤ 0.30% Sulfur (S): ≤ 0.015% Key Features of DIN 2527 Monel Blind Flanges: Corrosion Resistance: Monel alloys are highly resistant to a wide variety of corrosive agents, including seawater, sulfuric acid, hydrochloric acid, and alkaline environments. Monel 400, in particular, is known for its excellent resistance to chloride-induced stress corrosion cracking, making it ideal for marine applications. Monel K-500 offers enhanced strength and resistance to corrosion fatigue, commonly used in more challenging environments. Temperature Resistance: Monel 400 can withstand temperatures up to 1000°F (538°C) continuously and up to 1200°F (649°C) intermittently. Monel K-500 offers high strength and resistance to oxidation and scaling in environments up to 1000°F (538°C). Mechanical Strength: Monel 400 is known for its strength and durability, especially in environments that require resistance to both high pressure and corrosion. Monel K-500 exhibits additional strength due to the presence of aluminum and titanium, making it suitable for applications under higher stresses. Dimensional Accuracy and Pressure Class: DIN 2527 Monel Blind Flanges are manufactured to precise dimensions, ensuring a secure seal in the piping system. These flanges are available in various pressure classes, such as PN6, PN10, PN16, and others, providing flexibility for different pressure ratings. Design Options: Standard Blind Flange (Type A): A solid, flat disc used to seal the end of a pipe or vessel. Flat-Faced Blind Flange: Designed with a flat sealing surface, ideal for low-pressure systems. Raised Face Blind Flange: Features a raised surface around the center to improve sealing in high-pressure systems. Ring-Type Joint (RTJ) Blind Flange: Includes a groove for an RTJ gasket, used for high-pressure applications, often in the oil and gas industry. Long Weld Neck Blind Flange: Features an extended neck for welding, offering additional strength and used in high-pressure or stressed systems. Nominal Diameter: DIN 2527 Monel Blind Flanges are available in a wide range of sizes, typically from DN10 (1/2 inch) up to DN600 (24 inches) or more, depending on system requirements.