'05 10 nitrogen'

QUALITY STANDARD MATERIAL NO. OLD DESIGNATION DC05 DIN EN 10130 1.0312 St 15-03 The special deep-drawing grade DC05 is specified in accordance with the DIN EN 10130 standard, which focuses on cold-rolled flat products made of soft steels for cold forming. This standard specifies the technical requirements and test methods for cold-rolled products used in numerous industrial applications, particularly where exceptional formability and excellent surface quality are required. DC05 is a low-carbon steel that is characterized by its excellent cold formability. The chemical composition of DC05 is strictly controlled to ensure that the material has the desired mechanical properties. The carbon content in DC05 is typically a maximum of 0.02 %, while the manganese content is a maximum of 0.25 %. This composition promotes the high formability and weldability of the steel. The mechanical properties of DC05 are characterized by a low yield strength of maximum 150 MPa and a tensile strength between 270 and 350 MPa. An outstanding feature of DC05 is its high elongation at break of at least 38 %, which illustrates its excellent formability. These properties make DC05 ideal for the production of complex components that require high precision and surface quality, such as body parts in the automotive industry or sophisticated components in the electrical industry. The DIN EN 10130 standard also specifies the tolerances for dimensions, shape and surface finish. These tolerances are crucial to ensure consistently high product quality and to meet the requirements of end users. The surface of the cold-rolled flat products can be supplied in various qualities, from matt to glossy, to meet the specific requirements of different applications. The DIN EN 10152 standard specifies electrolytically galvanized, cold-rolled flat steel products for cold forming, including the special deep-drawing grade DC05. This standard defines the requirements for the zinc coating and the basic mechanical properties of the base material. DC05, when electrolytically galvanized in accordance with DIN EN 10152, is given an additional corrosion protection layer of zinc. This layer protects the material from oxidative influences and significantly increases the service life of the components made from it. The zinc coating can be applied in various thicknesses, depending on the specific requirements of the application. Typical coating thicknesses range from 5 to 20 µm. The chemical composition and mechanical properties of the base material DC05 remain unchanged after galvanizing and meet the requirements of DIN EN 10130. DC05 therefore retains its excellent cold formability and mechanical performance. The yield strength, tensile strength and elongation at break also remain in the same range as for ungalvanized DC05. In addition to mechanical performance, the quality of the zinc coating is of central importance. The DIN EN 10152 standard specifies the requirements for the uniformity of the coating, the adhesive strength of the zinc and the surface quality. These requirements ensure that the galvanized products offer high corrosion resistance and an aesthetically pleasing surface. The use of DC05 in accordance with DIN EN 10152 is widespread in the automotive industry, in the construction industry and in the manufacture of household appliances, where improved corrosion resistance is required in addition to high formability. Electrolytic galvanizing offers optimum protection here without impairing the excellent mechanical properties of the base material. In summary, it can be said that the special deep-drawing grade DC05 offers a wide range of applications in accordance with both DIN EN 10130 and DIN EN 10152. While DIN EN 10130 focuses on high formability and surface quality, DIN EN 10152 supplements these properties with improved corrosion resistance thanks to the zinc coating. Both standards ensure that DC05 is a reliable and high-quality material for numerous industrial applications.

QUALITY STANDARD MATERIAL NO. OLD DESIGNATION DC05 DIN EN 10130 1.0312 St 15-03 The special deep-drawing grade DC05 is specified in accordance with the DIN EN 10130 standard, which focuses on cold-rolled flat products made of soft steels for cold forming. This standard specifies the technical requirements and test methods for cold-rolled products used in numerous industrial applications, particularly where exceptional formability and excellent surface quality are required. DC05 is a low-carbon steel that is characterized by its excellent cold formability. The chemical composition of DC05 is strictly controlled to ensure that the material has the desired mechanical properties. The carbon content in DC05 is typically a maximum of 0.02 %, while the manganese content is a maximum of 0.25 %. This composition promotes the high formability and weldability of the steel. The mechanical properties of DC05 are characterized by a low yield strength of maximum 150 MPa and a tensile strength between 270 and 350 MPa. An outstanding feature of DC05 is its high elongation at break of at least 38 %, which illustrates its excellent formability. These properties make DC05 ideal for the production of complex components that require high precision and surface quality, such as body parts in the automotive industry or sophisticated components in the electrical industry. The DIN EN 10130 standard also specifies the tolerances for dimensions, shape and surface finish. These tolerances are crucial to ensure consistently high product quality and to meet the requirements of end users. The surface of the cold-rolled flat products can be supplied in various qualities, from matt to glossy, to meet the specific requirements of different applications. The DIN EN 10152 standard specifies electrolytically galvanized, cold-rolled flat steel products for cold forming, including the special deep-drawing grade DC05. This standard defines the requirements for the zinc coating and the basic mechanical properties of the base material. DC05, when electrolytically galvanized in accordance with DIN EN 10152, is given an additional corrosion protection layer of zinc. This layer protects the material from oxidative influences and significantly increases the service life of the components made from it. The zinc coating can be applied in various thicknesses, depending on the specific requirements of the application. Typical coating thicknesses range from 5 to 20 µm. The chemical composition and mechanical properties of the base material DC05 remain unchanged after galvanizing and meet the requirements of DIN EN 10130. DC05 therefore retains its excellent cold formability and mechanical performance. The yield strength, tensile strength and elongation at break also remain in the same range as for ungalvanized DC05. In addition to mechanical performance, the quality of the zinc coating is of central importance. The DIN EN 10152 standard specifies the requirements for the uniformity of the coating, the adhesive strength of the zinc and the surface quality. These requirements ensure that the galvanized products offer high corrosion resistance and an aesthetically pleasing surface. The use of DC05 in accordance with DIN EN 10152 is widespread in the automotive industry, in the construction industry and in the manufacture of household appliances, where improved corrosion resistance is required in addition to high formability. Electrolytic galvanizing offers optimum protection here without impairing the excellent mechanical properties of the base material. In summary, it can be said that the special deep-drawing grade DC05 offers a wide range of applications in accordance with both DIN EN 10130 and DIN EN 10152. While DIN EN 10130 focuses on high formability and surface quality, DIN EN 10152 supplements these properties with improved corrosion resistance thanks to the zinc coating. Both standards ensure that DC05 is a reliable and high-quality material for numerous industrial applications.

QUALITY STANDARD MATERIAL NO. OLD DESIGNATION DC05 DIN EN 10130 1.0312 St 15-03 The special deep-drawing grade DC05 is specified in accordance with the DIN EN 10130 standard, which focuses on cold-rolled flat products made of soft steels for cold forming. This standard specifies the technical requirements and test methods for cold-rolled products used in numerous industrial applications, particularly where exceptional formability and excellent surface quality are required. DC05 is a low-carbon steel that is characterized by its excellent cold formability. The chemical composition of DC05 is strictly controlled to ensure that the material has the desired mechanical properties. The carbon content in DC05 is typically a maximum of 0.02 %, while the manganese content is a maximum of 0.25 %. This composition promotes the high formability and weldability of the steel. The mechanical properties of DC05 are characterized by a low yield strength of maximum 150 MPa and a tensile strength between 270 and 350 MPa. An outstanding feature of DC05 is its high elongation at break of at least 38 %, which illustrates its excellent formability. These properties make DC05 ideal for the production of complex components that require high precision and surface quality, such as body parts in the automotive industry or sophisticated components in the electrical industry. The DIN EN 10130 standard also specifies the tolerances for dimensions, shape and surface finish. These tolerances are crucial to ensure consistently high product quality and to meet the requirements of end users. The surface of the cold-rolled flat products can be supplied in various qualities, from matt to glossy, to meet the specific requirements of different applications. The DIN EN 10152 standard specifies electrolytically galvanized, cold-rolled flat steel products for cold forming, including the special deep-drawing grade DC05. This standard defines the requirements for the zinc coating and the basic mechanical properties of the base material. DC05, when electrolytically galvanized in accordance with DIN EN 10152, is given an additional corrosion protection layer of zinc. This layer protects the material from oxidative influences and significantly increases the service life of the components made from it. The zinc coating can be applied in various thicknesses, depending on the specific requirements of the application. Typical coating thicknesses range from 5 to 20 µm. The chemical composition and mechanical properties of the base material DC05 remain unchanged after galvanizing and meet the requirements of DIN EN 10130. DC05 therefore retains its excellent cold formability and mechanical performance. The yield strength, tensile strength and elongation at break also remain in the same range as for ungalvanized DC05. In addition to mechanical performance, the quality of the zinc coating is of central importance. The DIN EN 10152 standard specifies the requirements for the uniformity of the coating, the adhesive strength of the zinc and the surface quality. These requirements ensure that the galvanized products offer high corrosion resistance and an aesthetically pleasing surface. The use of DC05 in accordance with DIN EN 10152 is widespread in the automotive industry, in the construction industry and in the manufacture of household appliances, where improved corrosion resistance is required in addition to high formability. Electrolytic galvanizing offers optimum protection here without impairing the excellent mechanical properties of the base material. In summary, it can be said that the special deep-drawing grade DC05 offers a wide range of applications in accordance with both DIN EN 10130 and DIN EN 10152. While DIN EN 10130 focuses on high formability and surface quality, DIN EN 10152 supplements these properties with improved corrosion resistance thanks to the zinc coating. Both standards ensure that DC05 is a reliable and high-quality material for numerous industrial applications.

DIN 2576 Duplex Flanges PN 10 are robust, slip-on flanges engineered from duplex stainless steel, designed for piping systems operating under low to medium pressures. Manufactured according to the DIN 2576 standard, these flanges combine high mechanical strength with excellent corrosion resistance, particularly in chloride-rich and aggressive chemical environments. The slip-on configuration allows for simple positioning over the pipe and secure welding, ensuring accurate alignment and strong sealing integrity in a variety of industrial applications. Ladhani Metal Corporation is a renowned manufacturer and global exporter of duplex steel flanges, offering products that conform to international specifications in terms of dimensions, metallurgy, and performance. DIN 2576 duplex flanges are especially valued in industries requiring resistance to pitting, crevice corrosion, and stress corrosion cracking, including offshore, chemical, and wastewater systems. Pressure Rating: • PN 10 (10 bar / 145 psi): Suitable for moderate-pressure systems requiring long-term performance in harsh environments. Flange Types: • Slip-On Flanges Designed to slide over the pipe and be welded on both sides, these flanges offer easy installation and secure mechanical integrity. • Flat Face (FF) Flanges Used in conjunction with flat gaskets and flat mating surfaces, ideal for connections involving non-metallic or cast components. Duplex Stainless Steel Grades and Composition: Duplex 2205 (UNS S32205 / S31803) Composition: • Chromium (Cr): 21.0 – 23.0% • Nickel (Ni): 4.5 – 6.5% • Molybdenum (Mo): 2.5 – 3.5% • Nitrogen (N): 0.14 – 0.20% • Iron (Fe): Balance Applications: Duplex 2205 offers twice the yield strength of conventional stainless steels with superior resistance to chloride-induced corrosion. Common applications include chemical processing, desalination, marine systems, and structural components in offshore platforms. Applications of DIN 2576 Duplex Flanges: • Offshore and Marine Engineering Ideal for seawater cooling systems, risers, and structural supports exposed to harsh marine environments. • Chemical and Petrochemical Industries Used in systems handling aggressive acids, chlorides, and solvents where standard stainless steels are insufficient. • Water Treatment and Desalination Applied in brine systems, high-salinity piping, and reverse osmosis plants for their resistance to pitting and scaling. • Pulp and Paper Industry Resists corrosion from bleaching chemicals and process fluids under high pressure. • Oil and Gas Suitable for pressure control systems, separators, and sour service applications. • Structural and Pressure Vessel Fabrication Used in tanks, pressure vessels, and piping subjected to mechanical and corrosive stress. Key Features: • Compliant with DIN 2576 standards • PN 10 pressure rating for moderate-pressure use • Excellent resistance to chloride stress corrosion, pitting, and crevice corrosion • High strength-to-weight ratio, reducing component size and cost • Available in Duplex 2205, Super Duplex 2507, and other custom grades • Slip-on design ensures quick and accurate pipe connections • Flat face options compatible with a variety of gaskets and materials • Ideal for chemical, marine, oil and gas, and water treatment sectors • Custom dimensions, face types, and surface finishes available Conclusion: DIN 2576 Duplex Flanges PN 10 from Ladhani Metal Corporation provide outstanding durability and corrosion resistance for challenging industrial environments. With availability in Duplex 2205 and Super Duplex 2507, these flanges are a reliable solution for systems exposed to high chlorides, pressure, and temperature. For technical specifications, grade selection, or project-specific orders, contact Ladhani Metal Corporation today.

Ladhani Metal Corporation, a manufacturer, supplier, and exporter, offers stainless steel sheets, plates, and coils in grade X10Cr17Mn6Ni4N2O as per IS 6911 specifications. X10Cr17Mn6Ni4N2O is an austenitic stainless steel grade stabilized with nitrogen, manganese, and nickel, designed to deliver excellent corrosion resistance, high strength, and superior toughness. This grade is widely preferred in critical industries for its resistance to pitting, stress corrosion cracking, and oxidation. Chemical Composition of X10Cr17Mn6Ni4N2O (as per IS 6911) • Carbon (C): 0.10% max • Manganese (Mn): 5.5% – 7.5% • Silicon (Si): 1.0% max • Phosphorus (P): 0.040% max • Sulphur (S): 0.030% max • Chromium (Cr): 16.5% – 18.5% • Nickel (Ni): 3.5% – 5.5% • Nitrogen (N): 0.15% – 0.30% Functions and Characteristics • Provides excellent corrosion resistance in chloride-bearing and aggressive environments • Nitrogen improves strength, toughness, and resistance to localized corrosion • Manganese enhances mechanical strength and stabilizes the austenitic structure • Offers good resistance to stress corrosion cracking and intergranular corrosion • Non-magnetic in the annealed condition with superior weldability and formability Applications • Power Generation – Heat exchangers, condensers, and boiler parts • Oil and Gas – Offshore platforms, subsea equipment, and pipelines • Petrochemical Industry – Reactors, chemical processing units, and refineries • Fertilizer Plants – Equipment exposed to corrosive fertilizers and chemical solutions • Chemical Industry – Process vessels, storage tanks, and high-strength piping systems • Marine Engineering – Ship components, seawater systems, and offshore structures • Automotive Industry – Exhaust systems, catalytic converter parts, and structural components • Food Processing – Hygienic equipment, storage tanks, and machinery • Construction – Architectural cladding, structural elements, and heavy-duty fasteners • General Engineering – Shafts, fasteners, machine parts, and components exposed to corrosive media Available Forms • Stainless steel sheets • Stainless steel plates • Stainless steel coils Grades Available under IS 6911 Apart from X10Cr17Mn6Ni4N2O, IS 6911 also covers a wide range of stainless steel grades, including X04Cr12, X07Cr17, X12Cr12, X20Cr13, X30Cr13, X40Cr13, X15Cr16Ni2, X108Cr17Mo, X07Cr11Mn12Ni4, X10Cr18Mn9Ni5, X30Cr17Ni7, X07Cr18Ni9, X04Cr19Ni9, X02Cr19Ni10, X15Cr24Ni13, X20Cr25Ni20, X04Cr17Ni12Mo2, X02Cr17Ni12Mo2, X04Cr17Ni12Mo2Ti, X04Cr18Ni10Ti, X04Cr18Ni10Nb and other specified grades. Conclusion IS 6911 SS X10Cr17Mn6Ni4N2O sheets, plates, and coils offered by Ladhani Metal Corporation, a manufacturer, supplier, and exporter, deliver a combination of excellent corrosion resistance, high strength, and structural stability, making them suitable for marine, petrochemical, power generation, and chemical industries. With availability in multiple grades as per IS 6911, we provide stainless steel solutions that meet both domestic and international standards. For inquiries or project requirements, contact Ladhani Metal Corporation. #Mumbai #Delhi #Chennai #Kolkata #Hyderabad #Bangalore #Pune #Ahmedabad #Surat #Rajkot #Vadodara #Coimbatore #Jaipur #Nagpur #Indore #Ludhiana #Kanpur #Bhubaneswar #Rourkela #Visakhapatnam #Trichy #Kochi #Mangalore #Jamnagar #Bharuch #Vapi #Hazira #Ankleshwar #Durgapur #Jamshedpur #Raipur #Bilaspur #Faridabad #Noida #Gurgaon #Chandigarh #Lucknow #Bhopal #Patna #Guwahati #Agra #Varanasi #Meerut #Ghaziabad #Moradabad #Aligarh #Aurangabad #Kolhapur #Nashik #Solapur #Thane #Amravati #Satara #Sangli #Hubli #Belgaum #Davangere #Mysore #Erode #Salem #Madurai #Tirunelveli #Tuticorin #Hosur #Nellore #Warangal #Karimnagar #Nanded #Udaipur #Ajmer #Jodhpur #Kota #Alwar #Gwalior #Rewa #Jhansi #IS6911sheetmanufacturer #IS6911sheet supplier # IS6911sheetexporter #IS6911 #IS6911StainlessSteel #IS6911Sheet #IS6911Plate #IS6911Coil #IS6911Strip #IS6911Manufacturer #IS6911Supplier #IS6911Exporter #StainlessSteelIndia #StainlessSteelSheet #StainlessSteelPlate #StainlessSteelCoil #StainlessSteelStrip #SS304 #SS304L #SS316 #SS316L #X04Cr12 #X07Cr17 #X12Cr12 #X20Cr13 #X30Cr13 #X40Cr13 #X15Cr16Ni2 #X108Cr17Mo #X07Cr18Ni9 #X04Cr19Ni9 #X02Cr19Ni10 #X15Cr24Ni13 #X20Cr25Ni20 #X04Cr17Ni12Mo2 #X02Cr17Ni12Mo2 #X04Cr17Ni12Mo2Ti #X04Cr18Ni10Ti #X04Cr18Ni10Nb #StainlessSteelGrades #StainlessSteelManufacturer #StainlessSteelSupplier #StainlessSteelExporter #StainlessSteelStockist #IndustrialStainlessSteel #BoilerStainlessSteel #PetrochemicalStainlessSteel #ChemicalIndustryStainlessSteel #MarineStainlessSteel #HeatResistantSteel #CorrosionResistantSteel #SSSheetsPlatesCoils #LadhaniMetalCorporation

Product Name: Titanium Screw Standard: DIN933 DIN934 Material: Gr2 Unit Price: $0.5usd/pc-$3.2usd/pc Head Type: Hexagon Head Surface: Polished Technique: CNC Machined, Forged MOQ: 200pcs

Being one of the leading organization in the market, highly involved in offering a broad range of Dished Ends as per DIN 28011 And DIN28013 to our esteemed customers. Our offered products are manufactured suing utmost quality raw material which is obtained from the authentic vendor if the supplier. Moreover, these products are accessible in different sizes and dimensions to suit the varied demands and needs of our customers.We Manufacture and Export Types Of Dishends / Endcaps / Heads ELLIPSOIDAL HEAD HEMISPHERICAL HEAD. TORISPHERICAL HEAD KLÖPPER HEAD KORBBOGEN HEAD Semi ellipsoidal head DIN28013 Flat dished heads Standard Flat dished heads Flat heads Convex Discs Plate Type Heads Diffuser Heads Cone , Bulk & Tank Vehicle Heads Weld Counstriction Special Pressed part Experienced In Making Grades Like Carbon steel,P265-GH, 16Mo3,15NiCuMoNb5, CrMo(V), Alloy steel, 10CrMo9-10,13CrMo4-5,ASME SA 387 Gr.11,Gr12,ASME SA 387 Gr.91,P355-Gh,-NH,-NL1,-NL2,ASME SA 516 Gr.60 , Gr.70,Stainless steel 1.4301,1.4307,1.4404,1.4541,1.4571,1.4539,1.4501,Stainless steel ASME SA240 304,304L,316,316l,321,321H,316Ti,904L,2205,Super Duplex 1.4462 , cr25,Nickel alloys Alloy 20,59,200,MONEL 400,INCONEL 600,601,625,INCOLOY 800,825, 825,Copper,Titanium Grade 2,Grade 5, Aluminium Test method: Impact -Test acc. to DIN EN 10045-2 Tensile test acc to DIN EN 10002-1 , ISO 6892-1 , ASTM A 370 Hot tensile test acc to DIN EN 10002-5 until 900°C Hardness Test acc. to Brinell and DIN EN ISO 6506-1 Testing of intercrystalline corrosion acc to ISO 3651-2 (A) , ASTM A 262 Pract. E X – Ray -Examination acc. to EN 1435 , ISO 5817 , ASME V Art.2 , VIII Div.1 § UW -51 UT - Ultrasonic testing acc. to EN 10160 , EN 10307 , ASME SA-578 , ASME SA-435 PT - Penetrant testing acc. to EN 571 , ASME V Art.6 , ASME VIII Div.1 App.8 MT- Magnetic particle testing acc. to EN 1291 , ASME V Art.7 , ASMEVIII Div.1 App.6 Certificate: Certificate acc. to EN 10204 - 3.1 and 3.2 from independent organization

Product Name: 8mm titanium plate Material: Gr1 Gr2 Gr3 Gr4 Gr5 Gr7 Gr12 etc. Standard: ASTM B265 ASME SB 265 Surface: Pickling, Polishing, Sand Blasting Technique:Rolled, Forged Unit Price: $15usd/kg-$48usd/kg Thickness: 0.5-100mm Length: 500-6000mm Or As You Require Width: 500-1000mm Or As You Require Product Introduction Titaniu plates and titanium alloy plates are mainly used to manufacture various containers, reactors, heat exchangers, distillation towers, pipes, pumps and valves in the petrochemical machinery manufacturing industry. Titanium can be used as a titanium cathode and condenser in power stations, as well as environmental pollution control devices. The hardness of steel is higher than that of titanium plate, but the specific strength or tensile strength of titanium alloy is higher than that of high-quality steel. Titanium alloy has good heat resistance, low temperature toughness and fracture toughness, so it is mostly used as aircraft engine parts and rocket and missile structural parts. Titanium alloy can also be used as fuel and oxidant storage tanks and high-pressure vessels. There are already automatic rifles, mortar seat plates and recoilless gun launch tubes made of titanium alloy. Product Name: 8mm titanium plate Material: Gr1 Gr2 Gr3 Gr4 Gr5 Gr7 Gr12 etc. Standard: ASTM B265 ASME SB 265 Surface: Pickling, Polishing, Sand Blasting Technique:Rolled, Forged Thickness: 0.5-60mm Length: 500-6000mm Or As You Require Width: 500-1000mm Or As You Require Status and specifications of titanium plates Grade Technique Status Thickness Gr1 Gr2 Gr3 Gr4 (pure titanium plate) Hot rolled Annealed 4.1-60mm Cold rolled Annealed 0.3-4mm Gr5 Gr7 Gr12 etc. (Titanium alloy plate) Hot rolled Annealed 4.1-60mm Cold rolled Annealed 0.8-4.0mm

Product name:Titanium Sheet Unit price:$15.5-$36.9/kg Material: Titanium Grade 5 (Ti6al4v) Standard: ASTM/ASME B265 AMS 4911 ASTM F136 Demension: Thickness*1000*2000mm Thickness*3000*6000mm (Standard size); Thickness: 0.5mm; 0.8mm; 1.0mm; 1.2mm; 1.5mm; 2.0mm; 3.0mm; 4.0mm ......40mm etc br>Technique : Rolled Status: Annealed(M) MTC: EN10204.3.1 certificate MOQ : 10kgs Applications : Petroleum ,chemical industry, Marine, medical Package:Standard export packaging, inside foam film and pearl cotton protection, outside fumigation-free plywood case. Customized size welcome. Hot rolled titanium plate Titanium plate gr5 Grade 5 titanium plate titanium alloy plate Ti6al4v plate Grade 5 titanium is one of the most commonly used alloys in titanium industry, accounting for 50% of the world titanium consumption. Also known as Ti-6Al-4V (or ti6-4), this name refers to its main chemical composition of 90% titanium, 6% aluminum, 4% vanadium, 0.25% (maximum) iron and 0.2% (maximum) oxygen. It has almost the same high corrosion resistance as pure titanium, but has better strength, low elastic modulus, good weldability and heat treatment. The addition of aluminum and vanadium improves the hardness and physical and mechanical properties of the alloy. Product name:Titanium Sheet ,grade 5 titanium sheet ,titanium alloy sheet,10mm titanium sheet,5mm titanium sheet,gr5 titanium sheet,6Al4V sheet, Ti6Al4V titanium sheet,Titanium sheet plate price per kg Material: Titanium Grade 5 (Ti6al4v) Standard: ASTM/ASME B265, AMS 4911, ASTM F136 Demension: Thickness*1000*2000mm Thickness*3000*6000mm (Standard size); Thickness: 0.5mm; 0.8mm; 1.0mm; 1.2mm; 1.5mm; 2.0mm; 3.0mm; 4.0mm ......40mm etc Technique : Rolled Status: Annealed(M) MTC: EN10204.3.1 certificate Grade 5 (Ti6Al4V) titanium sheet/plate Chemical compositions(weight%,<=) Ti Al V Fe C Remainder 5.5-6.75 3.5-4.5 0.30 0.08 N H O Other(total) 0.05 0.015 0.2 0.4 Physical properties(>=) Σb Tensile Strength (Mpa) σr0.2 Yield Strength (Mpa) δL0+50mm Elongation (%) ψ Reduction of area (%) 895 830 12 25