DIN 2632 titanium flanges PN 10 are precision-fabricated weld neck flanges produced according to the DIN 2632 standard. These flanges are designed for medium-pressure applications up to 10 bar (145 psi), offering excellent corrosion resistance, strength, and durability in highly demanding industrial environments. Manufactured from high-grade titanium alloys, they provide outstanding performance in aggressive chemical, marine, and high-temperature settings where conventional materials may fail. Ladhani Metal Corporation is a trusted global manufacturer and supplier of titanium flanges, known for its consistent quality and engineering precision. Each flange is rigorously tested to ensure compliance with applicable industrial standards and environmental regulations. Pressure Rating: • PN 10 (10 bar / 145 psi): Suitable for medium-pressure pipeline systems requiring superior corrosion resistance and mechanical integrity. Flange Type: • Weld Neck Flanges Designed with a long tapered hub to ensure strong pipe alignment and reduce stress concentration at the flange base. This design supports smooth flow transitions and enhances joint strength. • Flat Face (FF) Flanges Flat face design promotes even gasket compression and is preferred for use with cast components or soft gasket materials. Titanium Grades and Composition: Grade 2 (Commercially Pure Titanium) • Titanium (Ti): ≥ 99.2% • Oxygen (O): ≤ 0.25% • Carbon (C): ≤ 0.08% • Nitrogen (N): ≤ 0.03% • Iron (Fe): ≤ 0.30% • Hydrogen (H): ≤ 0.015% Applications: Known for excellent corrosion resistance and good mechanical properties, Grade 2 titanium is commonly used in chemical processing, water treatment, and marine applications where corrosion resistance is critical. Grade 5 (Ti-6Al-4V Alloy) • Titanium (Ti): Balance • Aluminum (Al): 5.5 – 6.75% • Vanadium (V): 3.5 – 4.5% • Iron (Fe): ≤ 0.30% • Oxygen (O): ≤ 0.20% • Carbon (C): ≤ 0.08% • Nitrogen (N): ≤ 0.05% Applications: Grade 5 offers superior strength and excellent corrosion resistance, widely used in aerospace, marine, and high-performance chemical environments requiring higher mechanical properties. Applications of DIN 2632 Titanium Flanges PN 10: • Chemical and Petrochemical Industry Used in piping systems transporting aggressive acids, alkalis, and oxidizing substances. • Marine and Offshore Ideal for seawater piping, shipbuilding, and offshore platforms requiring corrosion-resistant materials. • Water Treatment and Desalination Applied in high-purity water systems and desalination plants operating at moderate pressures. • Aerospace and Power Generation Used in environments exposed to high temperatures and corrosive atmospheres. Key Features: • Compliant with DIN 2632 standards • PN 10 pressure rating for medium-pressure service • Weld neck design for robust pipe-flange connection • Available in Grade 2 and Grade 5 titanium alloys for tailored performance • Flat face option for even gasket contact • Lightweight with high strength-to-weight ratio • Suitable for harsh chemical and marine environments • Custom sizes, finishes, and titanium grades available upon request Conclusion: DIN 2632 Titanium Flanges PN 10 from Ladhani Metal Corporation offer a reliable and durable solution for medium-pressure applications demanding exceptional corrosion resistance and mechanical performance. Made from premium titanium alloys such as Grade 2 and Grade 5, these flanges are ideal for chemical, marine, desalination, aerospace, and power generation sectors. For custom dimensions, technical consultation, or pricing information, contact Ladhani Metal Corporation today.

DIN 2630 titanium flanges PN 2.5 are low-pressure weld neck flanges manufactured in accordance with the DIN 2630 standard. Designed to handle pressure ratings up to 2.5 bar (36.25 psi), these flanges are ideal for applications that demand lightweight, corrosion-resistant, and high-performance materials in non-critical or low-pressure environments. Made from high-grade titanium alloys such as Grade 2 and Grade 5 (Ti-6Al-4V), these flanges offer outstanding resistance to corrosion, especially in seawater, chlorine-rich, and oxidizing environments. Ladhani Metal Corporation is a leading global manufacturer and supplier of titanium flanges, recognized for engineering excellence and quality assurance. Our DIN 2630 PN 2.5 titanium weld neck flanges are widely used in sectors including marine, desalination, medical equipment, aerospace, and low-pressure chemical processing. With a focus on longevity and material efficiency, Ladhani Metal Corporation delivers flanges that meet stringent international standards for performance and safety. Pressure Rating: • PN 2.5 (2.5 bar / 36.25 psi): Suitable for lightweight, low-pressure systems requiring exceptional corrosion resistance and long service life. Flange Type: • Weld Neck Flanges Designed with a long tapered hub that provides stress reinforcement and reduces turbulence at the pipe connection. Ideal for ensuring structural integrity in precision-engineered piping systems. • Flat Face (FF) Flanges Flat face design allows for even gasket compression and is ideal for mating with cast or softer materials in low-pressure setups. Titanium Grades and Full Composition: Titanium Grade 2 (UNS R50400) • Titanium (Ti): ≥ 98.9% • Iron (Fe): ≤ 0.30% • Oxygen (O): ≤ 0.25% • Carbon (C): ≤ 0.08% • Nitrogen (N): ≤ 0.03% • Hydrogen (H): ≤ 0.015% Applications: Unalloyed titanium with excellent corrosion resistance in oxidizing and mildly reducing environments. Common in marine piping, desalination plants, and chemical systems. Titanium Grade 5 (Ti-6Al-4V / UNS R56400) • Titanium (Ti): Balance • Aluminum (Al): 5.5 – 6.75% • Vanadium (V): 3.5 – 4.5% • Iron (Fe): ≤ 0.40% • Oxygen (O): ≤ 0.20% • Carbon (C): ≤ 0.08% • Nitrogen (N): ≤ 0.05% • Hydrogen (H): ≤ 0.015% Applications: High-strength alloy with superior corrosion resistance. Used in aerospace, offshore equipment, and high-performance medical devices. Applications of DIN 2630 Titanium Flanges PN 2.5: • Marine and Offshore Systems Ideal for saltwater environments and seawater cooling lines due to superior corrosion resistance. • Chemical and Pharmaceutical Equipment Used in low-pressure, high-purity chemical handling systems. • Aerospace and Defense Applied in lightweight structural components where corrosion resistance and strength-to-weight ratio are critical. • Medical and Biomedical Devices Used in non-pressurized piping for medical processing and cleanroom environments. Key Features: • Manufactured according to DIN 2630 standards • PN 2.5 pressure class for non-critical, low-pressure applications • Lightweight and strong titanium construction • Weld neck design for superior mechanical performance • Exceptional corrosion resistance in aggressive environments • Available in titanium Grade 2 and Grade 5 • Flat face option for uniform sealing in sensitive applications • Custom sizes, finishes, and material options available upon request Conclusion: DIN 2630 Titanium Flanges PN 2.5 from Ladhani Metal Corporation offer a premium solution for industries requiring superior corrosion resistance, lightweight performance, and precision-engineered flange components for low-pressure service. Whether for marine, chemical, or high-tech applications, these titanium weld neck flanges deliver long-term reliability and material integrity. Contact Ladhani Metal Corporation for customized specifications, technical support, or detailed pricing.

DIN 2628 titanium flanges PN 250 are high-strength weld neck flanges manufactured according to the DIN 2628 standard. Specifically designed for high-pressure applications up to 250 bar (3625 psi), these flanges ensure secure, leak-free connections in systems where weight reduction, corrosion resistance, and long-term reliability are critical. Titanium flanges offer exceptional resistance to aggressive chemicals, seawater, and elevated temperatures, making them ideal for demanding industrial environments. Ladhani Metal Corporation is a globally recognized manufacturer and supplier of precision-engineered titanium flanges. Our DIN 2628 PN 250 titanium weld neck flanges are trusted in high-performance applications across aerospace, marine, chemical processing, desalination, power generation, and offshore industries for their unmatched strength-to-weight ratio, durability, and corrosion resistance. Pressure Rating: • PN 250 (250 bar / 3625 psi): Suitable for high-pressure piping systems requiring robust mechanical performance and corrosion resistance. Flange Type: • Weld Neck Flanges Designed with a tapered hub for smooth flow transition and reduced stress at the weld neck connection, ideal for high-pressure and high-temperature conditions. • Flat Face (FF) Flanges Flat face flanges ensure uniform gasket compression and are commonly used with brittle materials or cast components to prevent flange distortion. Titanium Grades and Composition: Titanium Grade 2 (UNS R50400) • Titanium (Ti): ≥ 98.9% • Iron (Fe): ≤ 0.30% • Oxygen (O): ≤ 0.25% • Carbon (C): ≤ 0.08% • Nitrogen (N): ≤ 0.03% • Hydrogen (H): ≤ 0.015% Applications: Commercially pure titanium with excellent corrosion resistance, especially in oxidizing and chloride-containing environments. Commonly used in desalination, marine, and chemical processing. Titanium Grade 5 / Ti-6Al-4V (UNS R56400) • Titanium (Ti): Balance • Aluminum (Al): 5.5 – 6.75% • Vanadium (V): 3.5 – 4.5% • Iron (Fe): ≤ 0.40% • Oxygen (O): ≤ 0.20% Applications: High-strength titanium alloy with excellent corrosion resistance and mechanical properties. Widely used in aerospace, offshore oil and gas, and high-performance industrial systems. Applications of DIN 2628 Titanium Flanges PN 250: • Aerospace and Defense Used in lightweight, high-pressure hydraulic and fuel systems requiring superior mechanical performance and corrosion resistance. • Marine and Offshore Engineering Ideal for seawater systems, ballast water treatment, and underwater piping due to titanium’s exceptional resistance to saltwater corrosion. • Chemical and Petrochemical Plants Suitable for highly corrosive and high-pressure chemical transport lines, reactors, and heat exchangers. • Desalination and Water Treatment Used in brine filtration and pressure vessels where resistance to chlorides and corrosion fatigue is essential. • Power Generation Employed in nuclear and thermal plants where high-temperature corrosion resistance and structural stability are required. Key Features: • Manufactured in accordance with DIN 2628 specifications • PN 250 pressure rating for high-pressure industrial use • Weld neck design for enhanced strength and sealing • Available in Titanium Grade 2 and Grade 5 materials • Flat face option for even gasket sealing and surface compatibility • Exceptional resistance to corrosion, chlorides, and seawater • Lightweight construction with high mechanical strength • Custom sizes, pressure classes, and finishes available upon request Conclusion: DIN 2628 Titanium Flanges PN 250 from Ladhani Metal Corporation are engineered for critical applications where high strength, pressure performance, and corrosion resistance are essential. Available in titanium Grade 2 and Grade 5, these weld neck flanges provide a reliable solution for industries operating under extreme conditions. Contact Ladhani Metal Corporation for technical support, custom specifications, or to request a quotation tailored to your project requirements.

DIN 2573 Titanium Flanges PN 6 are lightweight, corrosion-resistant plate flanges manufactured to DIN 2573 standards, specifically designed for low-pressure industrial and chemical applications. Fabricated from premium-grade titanium, these flanges are known for their exceptional strength-to-weight ratio, biocompatibility, and superior corrosion resistance, especially in aggressive environments involving chlorides, seawater, and oxidizing agents. DIN 2573 titanium flanges are ideal for critical applications across industries such as chemical processing, desalination, offshore engineering, medical systems, and aerospace. Ladhani Metal Corporation is a trusted supplier and exporter of precision-engineered titanium flanges, delivering products that meet stringent global quality standards. The DIN 2573 design, combined with the inherent material advantages of titanium, ensures long-lasting performance and ease of integration in low-pressure piping systems. Pressure Rating: • PN 6 (6 bar / 87 psi): Suitable for low-pressure pipelines and systems where outstanding corrosion resistance and long service life are essential, even under chemically aggressive or saline conditions. Flange Types: • Plate Flanges Standard flat flanges designed for bolted connections with gasket sealing, suitable for low-pressure service. • Flat Face (FF) Flanges Ensures full contact with mating flanges or non-metallic components to prevent stress cracking or uneven loading. • Slip-On Flanges Allow for easy alignment and welding, widely used in systems where frequent maintenance or disassembly is required. • Custom-Machined Flanges Available in custom sizes, dimensions, and titanium grades to suit specific project or industry needs. Titanium Grades and Composition: 1. Grade 2 (Commercially Pure Titanium) Composition: • Titanium (Ti): ≥ 99.2% • Iron (Fe): ≤ 0.30% • Oxygen (O): ≤ 0.25% • Carbon (C): ≤ 0.08% • Nitrogen (N): ≤ 0.03% • Hydrogen (H): ≤ 0.015% Applications: Used in desalination plants, chemical handling, marine equipment, and medical fluid systems due to its excellent formability, corrosion resistance, and biocompatibility. 2. Grade 5 (Ti-6Al-4V – Titanium Alloy) Composition: • Titanium (Ti): Balance • Aluminum (Al): 5.5 – 6.75% • Vanadium (V): 3.5 – 4.5% • Iron (Fe): ≤ 0.40% • Oxygen (O): ≤ 0.20% Applications: Preferred in aerospace, high-performance marine, and industrial applications requiring superior mechanical strength, wear resistance, and corrosion protection. Applications of DIN 2573 Titanium Flanges: • Chemical and Petrochemical Plants: Ideal for conveying aggressive acids, chlorides, and alkalis in low-pressure systems. • Desalination and Marine Systems: Exceptional resistance to seawater corrosion makes them suitable for brine, saltwater, and offshore structures. • Medical and Pharmaceutical Equipment: Non-toxic and biocompatible properties support sterile piping systems for fluids and gases. • Aerospace and Defense: Lightweight and high-strength material enhances performance in low-pressure structural and fuel systems. Key Features: • Manufactured according to DIN 2573 specifications • Designed for PN 6 low-pressure applications • Superior corrosion resistance in marine and chemical environments • Lightweight with high structural strength • Suitable for welding, pickling, passivation, and surface customization • Available in Grade 2, Grade 5, and other titanium alloys Conclusion: DIN 2573 Titanium Flanges PN 6 by Ladhani Metal Corporation offer a high-performance, corrosion-resistant solution for low-pressure systems exposed to harsh environments. With excellent mechanical properties and unmatched longevity, these titanium flanges serve critical roles in chemical, marine, medical, and water treatment industries. For detailed specifications, custom sizes, or material selection assistance, contact Ladhani Metal Corporation.

DIN 2569 Titanium Flanges PN 100 are precision-engineered welding neck flanges manufactured from premium-grade titanium, designed for exceptional performance in high-pressure and corrosive industrial applications. Built to DIN 2569 standards, these flanges offer outstanding corrosion resistance, high strength-to-weight ratio, and excellent thermal stability, making them suitable for critical systems across industries such as chemical processing, offshore engineering, aerospace, pharmaceuticals, marine, and power generation. Ladhani Metal Corporation is a trusted manufacturer and exporter of titanium flanges, delivering high-quality products that comply with rigorous international standards. The welding neck design ensures secure, leak-proof connections, ideal for high-stress environments and systems requiring permanent joints that withstand both pressure and temperature extremes. Pressure Rating: • PN 100 (100 bar / 1450 psi): Specifically designed for high-pressure systems requiring superior corrosion resistance, structural reliability, and long-term sealing performance in aggressive environments. Flange Types: • Welding Neck Flanges Ensure high-strength, welded connections ideal for systems with continuous pressure and thermal cycling. • Raised Face (RF) Flanges Enhances sealing capability in elevated pressure and temperature conditions. • Flat Face (FF) Flanges Used in systems with flat mating surfaces, particularly where non-metallic or brittle materials are involved. • Forged Welding Neck Flanges Provide enhanced strength, impact resistance, and dimensional precision. • Custom-Machined Flanges Available in a range of sizes, pressure classes, and titanium grades tailored to customer requirements. Titanium Grades and Composition: 1. Grade 2 (Commercially Pure Titanium) Composition: • Titanium (Ti): ≥ 98.9% • Iron (Fe): ≤ 0.30% • Oxygen (O): ≤ 0.25% • Carbon (C): ≤ 0.08% • Nitrogen (N): ≤ 0.03% • Hydrogen (H): ≤ 0.015% Applications: Widely used in chemical processing, desalination plants, and marine environments due to its excellent corrosion resistance and formability. 2. Grade 5 (Ti-6Al-4V, Titanium Alloy) Composition: • Titanium (Ti): Balance • Aluminum (Al): 5.5 – 6.75% • Vanadium (V): 3.5 – 4.5% Applications: Ideal for aerospace, offshore, and high-performance applications due to its high strength, low density, and corrosion resistance. Applications of DIN 2569 Titanium Flanges: • Chemical and Petrochemical Plants: Used in highly corrosive processes involving acids, chlorides, and oxidizing agents. • Marine and Offshore Engineering: Ideal for submerged and saltwater applications due to excellent resistance to seawater corrosion. • Aerospace and Defense: Employed in lightweight, high-strength components that require resistance to fatigue and corrosion. • Pharmaceutical and Medical Equipment: Used in ultra-clean and biocompatible systems where corrosion and contamination must be minimized. • Power Generation and Desalination: Applied in condenser systems, heat exchangers, and evaporators handling brine and other corrosive fluids. Key Features: • Manufactured to DIN 2569 standard • Available in PN 100 pressure rating • Exceptional corrosion resistance, including seawater and chemical environments • Lightweight, high-strength construction for improved efficiency and durability • Strong welded neck design for secure, permanent pipe connections • Supplied with test certificates, quality documents, and full traceability • Compatible with custom surface treatments including pickling, polishing, and passivation Conclusion: DIN 2569 Titanium Flanges PN 100 from Ladhani Metal Corporation are engineered for the highest levels of corrosion resistance, strength, and performance under pressure. Designed for extreme environments and demanding applications, these titanium flanges offer reliable, long-lasting service and are available in customized sizes and titanium grades. For project-specific requirements, technical support, or detailed specifications, contact Ladhani Metal Corporation today.

DIN 2568 Titanium Flanges PN 64 are precision-engineered threaded flanges manufactured from high-performance titanium alloys, designed to meet the rigorous demands of high-pressure and highly corrosive industrial environments. Built to DIN 2568 specifications, these flanges deliver exceptional corrosion resistance, high strength-to-weight ratio, and thermal stability, making them ideal for use in specialized sectors such as chemical processing, marine systems, aerospace, medical, and desalination plants. Ladhani Metal Corporation is a trusted manufacturer and exporter of titanium flanges, offering products that conform to international quality and dimensional standards. The threaded design supports easy, weld-free installation and disassembly, particularly beneficial in applications requiring frequent maintenance or rapid assembly in corrosive settings. Pressure Rating: • PN 64 (64 bar / 928 psi): Specifically engineered for high-pressure applications in harsh environments where both mechanical reliability and corrosion resistance are critical. Flange Types: • Threaded (Screwed) Flanges Facilitates easy assembly and removal, suitable for systems under routine inspection or component replacement. • Raised Face (RF) Flanges Improves gasket performance and leak-proof sealing in high-pressure and high-temperature applications. • Flat Face (FF) Flanges Ideal for use with equipment made from brittle or non-metallic materials to ensure even load distribution. • Forged Threaded Flanges Offers superior strength, precise tolerances, and excellent fatigue resistance. • Custom-Machined Flanges Available in multiple sizes, titanium grades, and configurations to meet project-specific requirements. Available Titanium Grades and Composition: 1. Grade 2 (Commercially Pure Titanium) Composition: • Titanium (Ti): ≥ 98.9% • Iron (Fe): ≤ 0.30% • Oxygen (O): ≤ 0.25% • Carbon (C): ≤ 0.08% • Nitrogen (N): ≤ 0.03% • Hydrogen (H): ≤ 0.015% Applications: Widely used in chemical processing, desalination, and medical systems due to excellent corrosion resistance, formability, and weldability. 2. Grade 5 (Ti-6Al-4V, Titanium Alloy) Composition: • Titanium (Ti): Balance • Aluminum (Al): 5.5 – 6.75% • Vanadium (V): 3.5 – 4.5% • Iron (Fe): ≤ 0.40% • Oxygen (O): ≤ 0.20% Applications: Preferred in aerospace, marine, and high-performance engineering applications due to its high strength, lightweight nature, and resistance to fatigue and cracking. Applications of DIN 2568 Titanium Flanges: • Chemical and Petrochemical Plants: Used in aggressive chemical environments including acid production and chlor-alkali plants. • Marine and Offshore Engineering: Ideal for seawater exposure, underwater pipelines, and offshore installations. • Aerospace and Defense: Applied in fuel systems, hydraulics, and high-stress structural components. • Medical and Pharmaceutical Industry: Suitable for biocompatible and sterile processing systems. • Water Treatment and Desalination Plants: Used in brine handling systems and long-service, corrosion-prone environments. Key Features: • Manufactured to DIN 2568 standard • Available in PN 64 pressure rating • Outstanding resistance to corrosion, erosion, and seawater attack • High strength-to-weight ratio and excellent fatigue performance • Threaded design allows weld-free, fast installation and maintenance • Supplied with material test certificates and full traceability • Can be supplied with specialized surface finishes including anodizing or pickling Conclusion: DIN 2568 Titanium Flanges PN 64 from Ladhani Metal Corporation combine advanced material properties with precision engineering to offer a premium solution for high-pressure, corrosive, and high-performance applications. These flanges are engineered for longevity, reliability, and ease of use in the most demanding environments. For detailed specifications, custom machining, or technical support, contact Ladhani Metal Corporation today.

DIN 2567 titanium flanges are precision-engineered threaded flanges designed for high-performance, medium-to-high-pressure piping systems. Manufactured according to the DIN 2567 standard, these flanges offer exceptional resistance to corrosion, extreme temperatures, and aggressive media. The threaded design allows for easy, weld-free installation, making them ideal for applications where frequent maintenance or system modifications are required. Ladhani Metal Corporation is a leading manufacturer and exporter of titanium flanges, supplying durable and high-quality components for industries that demand superior corrosion resistance and mechanical strength. DIN 2567 titanium flanges are widely used in marine, chemical, aerospace, and water treatment systems. Pressure Ratings: • PN 25 (25 bar / 362 psi): Suitable for moderate to high-pressure systems handling corrosive fluids or gases. Ideal for chemical, marine, and water treatment applications. • PN 40 (40 bar / 580 psi): Designed for high-pressure, high-performance environments requiring maximum reliability and resistance to mechanical stress. Commonly used in offshore, aerospace, and power generation systems. Flange Types: • Threaded (Screwed) Flanges Quick and convenient for non-welded, removable connections in high-purity or corrosive systems. • Raised Face (RF) Flanges Designed to enhance sealing efficiency by focusing compression on the gasket area. • Flat Face (FF) Flanges Ideal for use with non-metallic or brittle mating materials in low-to-medium pressure environments. • Forged Threaded Flanges Provide enhanced mechanical integrity, dimensional precision, and impact resistance. • Custom-Machined Flanges Available in customer-specified sizes, pressure ratings (PN 25, PN 40), and titanium grades. Titanium Grades and Composition: Grade 2 (Commercially Pure Titanium) Composition: Titanium (Ti): ≥ 98.9% Iron (Fe): ≤ 0.30% Oxygen (O): ≤ 0.25% Carbon (C): ≤ 0.08% Nitrogen (N): ≤ 0.03% Hydrogen (H): ≤ 0.015% Grade 5 (Titanium Alloy – Ti-6Al-4V) Composition: Titanium (Ti): Balance Aluminum (Al): 5.5 – 6.75% Vanadium (V): 3.5 – 4.5% Iron (Fe): ≤ 0.40% Oxygen (O): ≤ 0.20% Carbon (C): ≤ 0.08% Nitrogen (N): ≤ 0.05% Hydrogen (H): ≤ 0.015% Applications of DIN 2567 Titanium Flanges: • Chemical Processing: Resists corrosion from strong acids, solvents, and chlorides • Marine and Offshore Engineering: Performs reliably in saltwater environments and subsea installations • Aerospace and Defense: Used in lightweight, high-strength fuel and hydraulic systems • Power Generation: Handles steam and chemical media in nuclear and thermal power plants • Water & Wastewater Treatment: Ideal for high-purity systems, brine lines, and filtration units • Medical and Pharmaceutical: Suitable for bio-compatible and sterile fluid transport systems Key Features: • Manufactured to DIN 2567 standard • Available in PN 25 and PN 40 pressure ratings • Superior resistance to corrosion, erosion, and chemical attack • Lightweight structure with high tensile strength • Easy installation with threaded connections—no welding required • Suitable for both cryogenic and elevated temperature conditions Conclusion: DIN 2567 titanium flanges PN 25 and PN 40 from Ladhani Metal Corporation are the ideal choice for demanding, corrosion-sensitive environments. Combining strength, lightweight construction, and superior corrosion resistance, these flanges deliver long-lasting performance in critical applications across various industries. For detailed specifications, custom designs, or bulk orders, contact Ladhani Metal Corporation today.

Ladhani Metal Corporation is a trusted manufacturer and exporter of DIN 2561 titanium flanges, meticulously engineered for performance in low-pressure piping systems. The DIN 2561 standard outlines specifications for weld neck flanges with a nominal pressure rating of PN6, but we also offer extended options including PN10, PN16, PN25, and PN40 based on customer requirements. Our titanium flanges are crafted using premium-grade titanium alloys, ensuring exceptional corrosion resistance, lightweight strength, and reliability in critical environments such as chemical processing, marine systems, aerospace, and offshore operations. Flange types: • Weld neck flanges: Designed for high-integrity and stress-intensive piping systems • Raised face (RF): Enhances gasket performance and leak-proof sealing • Flat face (FF): Suitable where mating with brittle or non-metallic flange surfaces Grades, chemical composition, and applications: Titanium Grade 2 (UNS R50400) – Commercially Pure Titanium Chemical composition: Titanium (Ti): ≥ 98.90% Iron (Fe): ≤ 0.30% Oxygen (O): ≤ 0.25% Carbon (C): ≤ 0.08% Nitrogen (N): ≤ 0.03% Hydrogen (H): ≤ 0.015% Applications: Ideal for chemical processing, desalination, marine applications, and medical equipment. Excellent resistance to seawater, chlorides, and oxidizing environments. Lightweight and biocompatible, widely used in offshore platforms, heat exchangers, and aerospace structures. Titanium Grade 5 (Ti-6Al-4V, UNS R56400) – Titanium Alloy Chemical composition: Titanium (Ti): Balance Aluminum (Al): 5.5 – 6.75% Vanadium (V): 3.5 – 4.5% Iron (Fe): ≤ 0.40% Oxygen (O): ≤ 0.20% Carbon (C): ≤ 0.08% Nitrogen (N): ≤ 0.05% Hydrogen (H): ≤ 0.015% Applications: Common in high-performance and structural applications including aerospace, automotive, and deep-sea systems. High strength-to-weight ratio, excellent corrosion resistance, and thermal stability make it ideal for demanding engineering environments. Applications of DIN 2561 Titanium Flanges: Marine & Offshore Industries: titanium flanges ideal for offshore drilling rigs, subsea equipment, and desalination plants, ensuring reliable performance in marine environments. Chemical Processing: The superior corrosion resistance of titanium in aggressive chemicals makes it an excellent choice for reactors, pressure vessels, and pipelines used in chemical processing plants. Aerospace & Aviation: Titanium is used in aerospace applications due to its lightweight, high strength, and ability to withstand extreme temperatures. . Power Generation: In nuclear and thermal power plants, where materials must withstand high temperatures and corrosive conditions. Key features: • Manufactured as per DIN 2561 standard • High dimensional accuracy and surface finish • Custom sizes, face types, and drilling options available Conclusion: DIN 2561 titanium flanges from Ladhani Metal Corporation offer reliable, long-lasting performance in aggressive and weight-sensitive environments. With availability in grades like Titanium Grade 2 and Grade 5, these flanges meet international standards and suit a wide range of industrial applications. Our commitment to quality, precision, and customer satisfaction makes our titanium flanges a preferred choice across global industries. For technical details, pricing, or bulk inquiries, contact Ladhani Metal Corporation.

DIN 2527 SS P.H. (Precipitation Hardening) Blind Flanges are designed for use in high-performance piping systems that require robust sealing solutions. Made from precipitation-hardening stainless steel alloys, these flanges combine high strength, excellent corrosion resistance, and the ability to withstand elevated temperatures. Manufactured to meet the DIN 2527 standard, these flanges ensure dimensional accuracy, high pressure tolerance, and superior mechanical performance, making them ideal for demanding applications in industries such as chemical processing, aerospace, and power generation. Material Composition of Precipitation Hardening Stainless Steel (SS P.H.): Precipitation-hardening stainless steels are a family of alloys known for their ability to achieve high strength through heat treatment. Grade 17-4 PH: Chromium (Cr): 15.0% - 17.5% Nickel (Ni): 3.0% - 5.0% Copper (Cu): 3.0% - 5.0% Iron (Fe): Balance Manganese (Mn): 1.0% max Silicon (Si): 1.0% max Carbon (C): ≤ 0.07% Phosphorus (P): ≤ 0.04% Sulfur (S): ≤ 0.03% Grade 15-5 PH: Chromium (Cr): 14.0% - 15.5% Nickel (Ni): 3.5% - 5.5% Copper (Cu): 2.5% - 4.5% Iron (Fe): Balance Manganese (Mn): 1.0% max Silicon (Si): 1.0% max Carbon (C): ≤ 0.07% Phosphorus (P): ≤ 0.04% Sulfur (S): ≤ 0.03% Key Features of DIN 2527 SS P.H. Blind Flanges: High Strength: Precipitation-hardened stainless steels, such as 17-4 PH and 15-5 PH, are known for their high tensile strength and hardness. Corrosion Resistance: Stainless steel, especially in the precipitation-hardened grades, offers excellent resistance to corrosion, including resistance to pitting, crevice corrosion, and stress corrosion cracking in both aqueous and high-temperature environments High-Temperature Performance: SS P.H. Blind Flanges can withstand high temperatures, making them suitable for use in applications that involve elevated temperatures (up to 600°C or 1100°F), such as chemical reactors, power plants, and aerospace systems. Dimensional Accuracy & Pressure Ratings: These flanges are manufactured to precise DIN 2527 standards to ensure tight seals and correct fitment in piping systems. They are available in multiple pressure classes such as PN6, PN10, and PN16, which denote the maximum pressure the flange can safely withstand. Design Options: Standard Blind Flange (Type A): A solid, circular flange used to seal the end of a pipe or vessel, suitable for general applications. Flat-Faced Blind Flange: Features a flat sealing surface for low-pressure applications, ideal for ensuring a tight seal in systems with low pressure. Raised Face Blind Flange: Has a raised area around the center, providing enhanced sealing for higher-pressure applications. Ring-Type Joint (RTJ) Blind Flange: Designed with a groove for a ring-type joint gasket, used in high-pressure systems such as oil and gas pipelines. Long Weld Neck Blind Flange: Equipped with an extended neck for welding, offering additional strength and support in high-pressure or stressed systems. Nominal Diameter: DIN 2527 SS P.H. Blind Flanges are available in various nominal diameters (DN), ranging from DN10 (1/2 inch) up to DN600 (24 inches) or larger, ensuring compatibility with a wide range of piping systems and applications.