en 10088 3 ss bar rod

EN 10088-3 X2CrNiN23-4 is a high-alloy austenitic stainless steel grade characterized by high chromium content, nitrogen alloying, and very low carbon levels. This composition provides excellent resistance to general corrosion, improved pitting resistance compared to standard austenitic grades, and enhanced mechanical strength due to nitrogen strengthening. Supplied in rod form, X2CrNiN23-4 stainless steel is suitable for demanding industrial and engineering applications where corrosion resistance, strength, and structural stability are essential. This grade conforms to the EN 10088-3 standard, which specifies technical delivery conditions for stainless steel long products for general purposes. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X2CrNiN23-4 stainless steel rods. All materials are sourced from approved mills and supplied in accordance with EN 10088-3 requirements, ensuring consistent chemical composition, controlled mechanical properties, and accurate dimensional tolerances. Forms of Supply: Round bar, hex bar, square bar, rectangular bar, flat bar, rod Explanation of Designation (X2CrNiN23-4): • X – High-alloy steel • 2 – Approx. 0.02% carbon content • Cr23 – Approx. 23% chromium • Ni4 – Approx. 4% nickel • N – Nitrogen alloyed for increased strength and corrosion resistance Chemical Composition (% – typical limits): • Carbon (C): ≤ 0.03 • Chromium (Cr): 22.0 – 24.0 • Nickel (Ni): 3.0 – 5.0 • Nitrogen (N): 0.10 – 0.25 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 2.00 • Phosphorus (P): ≤ 0.045 • Sulphur (S): ≤ 0.015 Mechanical Properties (Typical, solution annealed): • Tensile Strength: 600 – 800 MPa • Yield Strength: ≥ 300 MPa • Elongation: ≥ 35% • Hardness: Typically ≤ 240 HB Key Features: • High-chromium austenitic stainless steel • Nitrogen-enhanced strength and pitting resistance • Excellent resistance to general and localized corrosion • Good toughness and ductility • Good weldability with appropriate procedures • Non-magnetic in annealed condition Material Characteristics: EN 10088-3 X2CrNiN23-4 stainless steel rod offers a combination of high corrosion resistance and improved mechanical strength compared to conventional austenitic grades. Nitrogen alloying enhances structural stability while maintaining good formability and toughness, making this grade suitable for demanding service environments. Applications: • Chemical processing equipment • Pressure-containing components • Structural and load-bearing parts • Marine and offshore applications • Industrial machinery and fabricated components Conclusion: Ladhani Metal Corporation supplies premium-quality EN 10088-3 X2CrNiN23-4 stainless steel rods in round, hex, square, rectangular, flat, and rod forms. With high chromium content, nitrogen strengthening, and reliable corrosion resistance, X2CrNiN23-4 stainless steel rod is an excellent choice for advanced industrial and engineering applications. #EN10088 #EN100883 #EN100883Steel #EN10088StainlessSteel #StainlessSteel #EuropeanStainlessSteel #ENStandardStainlessSteel #EN10088Supplier #EN10088Manufacturer #EN10088Stockist #EN10088Exporter #StainlessSteelBars #StainlessSteelRods #StainlessSteelWire #StainlessSteelBrightBar #SSRoundBar #SSFlatBar #SSHexBar #SSSquareBar #AusteniticStainlessSteel #FerriticStainlessSteel #MartensiticStainlessSteel #DuplexStainlessSteel #304StainlessSteel #304LStainlessSteel #316StainlessSteel #316LStainlessSteel #2205Duplex #StainlessSteelManufacturers #StainlessSteelSuppliers #StainlessSteelStockist #StainlessSteelExporters #IndianStainlessSteel #SSStockist #SSExporter #SteelIndustry #MetalIndustry #EngineeringSteel #IndustrialSteel #CorrosionResistantSteel #HighStrengthStainlessSteel #WeldableStainlessSteel #MachiningSteel #BrightBars #SteelBars #SteelRods #SteelWire #InfrastructureSteel #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar

EN 10088-3 X9CrNi18-9 is an austenitic stainless steel grade offering good corrosion resistance, reliable mechanical strength, and excellent formability. With a balanced chromium–nickel composition, this grade provides good resistance to oxidation and general corrosive environments while maintaining good toughness over a wide temperature range. Supplied in bar and rod form, X9CrNi18-9 stainless steel is suitable for general engineering and industrial applications where consistent performance and ease of fabrication are required. This grade conforms to the EN 10088-3 standard, which specifies technical delivery conditions for stainless steel long products for general purposes. Ladhani Metal Corporation is a dependable manufacturer, supplier, and exporter of EN 10088-3 X9CrNi18-9 stainless steel bars and rods. All materials are sourced from approved mills and supplied in full compliance with EN 10088-3 requirements, ensuring consistent chemical composition, mechanical properties, and dimensional accuracy. Forms of Supply: Round bar, hex bar, square bar, rectangular bar, flat bar, rod Explanation of Designation (X9CrNi18-9): • X – High-alloy steel • 9 – Approx. 0.09% carbon content • Cr18 – Approx. 18% chromium • Ni9 – Approx. 9% nickel Chemical Composition (% – typical limits): • Carbon (C): ≤ 0.10 • Chromium (Cr): 17.0 – 19.0 • Nickel (Ni): 8.0 – 10.0 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 2.00 • Phosphorus (P): ≤ 0.045 • Sulphur (S): ≤ 0.030 Mechanical Properties (Typical, solution annealed): • Tensile Strength: 520 – 750 MPa • Yield Strength: ≥ 210 MPa • Elongation: ≥ 40% • Hardness: Typically ≤ 220 HB Key Features: • Austenitic stainless steel with balanced Cr–Ni content • Good general corrosion and oxidation resistance • Excellent formability and weldability • Good toughness at low and elevated temperatures • Non-magnetic in annealed condition Material Characteristics: EN 10088-3 X9CrNi18-9 stainless steel bar and rod provides a reliable combination of corrosion resistance, strength, and workability, making it suitable for a wide range of fabricated and machined components. Applications: • General engineering components • Shafts, fasteners, and machined parts • Chemical and process equipment • Food processing and handling machinery • Architectural and industrial fabrications Conclusion: Ladhani Metal Corporation supplies high-quality EN 10088-3 X9CrNi18-9 stainless steel bars and rods in round, hex, square, rectangular, flat, and rod forms. With dependable corrosion resistance and excellent fabrication characteristics, X9CrNi18-9 stainless steel bar is a practical choice for diverse industrial and engineering applications. #EN10088 #EN100883 #EN100883Steel #EN10088StainlessSteel #StainlessSteel #EuropeanStainlessSteel #ENStandardStainlessSteel #EN10088Supplier #EN10088Manufacturer #EN10088Stockist #EN10088Exporter #StainlessSteelBars #StainlessSteelRods #StainlessSteelWire #StainlessSteelBrightBar #SSRoundBar #SSFlatBar #SSHexBar #SSSquareBar #AusteniticStainlessSteel #FerriticStainlessSteel #MartensiticStainlessSteel #DuplexStainlessSteel #304StainlessSteel #304LStainlessSteel #316StainlessSteel #316LStainlessSteel #2205Duplex #StainlessSteelManufacturers #StainlessSteelSuppliers #StainlessSteelStockist #StainlessSteelExporters #IndianStainlessSteel #SSStockist #SSExporter #SteelIndustry #MetalIndustry #EngineeringSteel #IndustrialSteel #CorrosionResistantSteel #HighStrengthStainlessSteel #WeldableStainlessSteel #MachiningSteel #BrightBars #SteelBars #SteelRods #SteelWire #InfrastructureSteel #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar

EN 10088-3 X5CrNiN19-9 is a nitrogen-alloyed austenitic stainless steel grade designed for applications requiring improved strength, excellent corrosion resistance, and good weldability. The controlled nitrogen addition increases yield strength and enhances resistance to pitting corrosion while maintaining good ductility and toughness. Supplied in rod and bar form, X5CrNiN19-9 stainless steel is suitable for structural, engineering, and industrial applications where higher mechanical performance than standard austenitic grades is required. This grade conforms to the EN 10088-3 standard, which specifies technical delivery conditions for stainless steel long products for general purposes. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X5CrNiN19-9 stainless steel rods and bars. All materials are sourced from approved mills and supplied in full compliance with EN 10088-3 specifications, ensuring consistent chemical composition, reliable mechanical properties, and precise dimensional accuracy. Forms of Supply: Round bar, hex bar, square bar, rectangular bar, flat bar, rod Explanation of Designation (X5CrNiN19-9): • X – High-alloy steel • 5 – Approx. 0.05% carbon content • Cr19 – Approx. 19% chromium • Ni9 – Approx. 9% nickel • N – Nitrogen addition for enhanced strength and corrosion resistance Chemical Composition (% – typical limits): • Carbon (C): ≤ 0.07 • Chromium (Cr): 18.0 – 20.0 • Nickel (Ni): 8.0 – 10.0 • Nitrogen (N): 0.10 – 0.20 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 2.00 • Phosphorus (P): ≤ 0.045 • Sulphur (S): ≤ 0.015 Mechanical Properties (Typical, solution annealed): • Tensile Strength: 550 – 780 MPa • Yield Strength: ≥ 280 MPa • Elongation: ≥ 40% • Hardness: Typically ≤ 220 HB Key Features: • Nitrogen-alloyed austenitic stainless steel • Higher strength than conventional 18-8 grades • Excellent corrosion and pitting resistance • Good weldability and formability • Non-magnetic in annealed condition • Suitable for structural and pressure applications Material Characteristics: EN 10088-3 X5CrNiN19-9 stainless steel rod and bar combines enhanced mechanical strength with excellent corrosion resistance. Its nitrogen-strengthened austenitic structure ensures reliable performance in demanding service environments. Applications: • Structural and load-bearing components • Pressure vessels and piping systems • Chemical and petrochemical equipment • Food processing and pharmaceutical machinery • General engineering and industrial fabrication Conclusion: Ladhani Metal Corporation supplies premium quality EN 10088-3 X5CrNiN19-9 stainless steel rods and bars in round, hex, square, rectangular, flat, and rod forms. With improved strength, excellent corrosion resistance, and dependable weldability, X5CrNiN19-9 stainless steel rod is a reliable choice for advanced engineering and industrial applications. For size availability or technical support, contact Ladhani Metal Corporation. #EN10088 #EN100883 #EN100883Steel #EN10088StainlessSteel #StainlessSteel #EuropeanStainlessSteel #ENStandardStainlessSteel #EN10088Supplier #EN10088Manufacturer #EN10088Stockist #EN10088Exporter #StainlessSteelBars #StainlessSteelRods #StainlessSteelWire #StainlessSteelBrightBar #SSRoundBar #SSFlatBar #SSHexBar #SSSquareBar #AusteniticStainlessSteel #FerriticStainlessSteel #MartensiticStainlessSteel #DuplexStainlessSteel #304StainlessSteel #304LStainlessSteel #316StainlessSteel #316LStainlessSteel #2205Duplex #StainlessSteelManufacturers #StainlessSteelSuppliers #StainlessSteelStockist #StainlessSteelExporters #IndianStainlessSteel #SSStockist #SSExporter #SteelIndustry #MetalIndustry #EngineeringSteel #IndustrialSteel #CorrosionResistantSteel #HighStrengthStainlessSteel #WeldableStainlessSteel #MachiningSteel #BrightBars #SteelBars #SteelRods #SteelWire #InfrastructureSteel #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar

EN 10088-3 X2CrNiN18-10 is a nitrogen-alloyed austenitic stainless steel grade developed for applications requiring excellent corrosion resistance, improved strength, and good weldability. The controlled nitrogen addition enhances yield strength and resistance to pitting corrosion while maintaining good ductility and toughness. Supplied in bar and rod form, X2CrNiN18-10 stainless steel is widely used in structural, engineering, and industrial applications. This grade conforms to the EN 10088-3 standard, which specifies technical delivery conditions for stainless steel long products for general purposes. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X2CrNiN18-10 stainless steel rods and bars. All materials are sourced from approved mills and supplied in full compliance with EN 10088-3 specifications, ensuring consistent chemical composition, reliable mechanical properties, and precise dimensional accuracy. Forms of Supply: Round bar, hex bar, square bar, rectangular bar, flat bar, rod Explanation of Designation (X2CrNiN18-10): • X – High-alloy steel • 2 – Approx. 0.02% carbon content • Cr18 – Approx. 18% chromium • Ni10 – Approx. 10% nickel • N – Nitrogen addition for enhanced strength and corrosion resistance Chemical Composition (% – typical limits): • Carbon (C): ≤ 0.03 • Chromium (Cr): 17.0 – 19.0 • Nickel (Ni): 9.0 – 11.0 • Nitrogen (N): 0.10 – 0.20 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 2.00 • Phosphorus (P): ≤ 0.045 • Sulphur (S): ≤ 0.015 Mechanical Properties (Typical, solution annealed): • Tensile Strength: 550 – 750 MPa • Yield Strength: ≥ 280 MPa • Elongation: ≥ 40% • Hardness: Typically ≤ 220 HB Key Features: • Nitrogen-alloyed austenitic stainless steel • Higher strength compared to standard X2CrNi18-9 • Excellent corrosion and pitting resistance • Good weldability with reduced risk of intergranular corrosion • Non-magnetic in annealed condition • Suitable for structural and load-bearing applications Material Characteristics: EN 10088-3 X2CrNiN18-10 stainless steel rod and bar offers an excellent combination of strength, corrosion resistance, and ductility. The nitrogen-enhanced austenitic structure ensures superior mechanical performance without sacrificing corrosion resistance. Applications: • Structural and load-bearing components • Chemical and petrochemical equipment • Pressure vessels and piping systems • Food processing and pharmaceutical industries • General engineering and industrial fabrication Conclusion: Ladhani Metal Corporation supplies high-quality EN 10088-3 X2CrNiN18-10 stainless steel rods and bars in round, hex, square, rectangular, flat, and rod forms. With enhanced strength, excellent corrosion resistance, and reliable weldability, X2CrNiN18-10 stainless steel bar is a dependable choice for demanding engineering and industrial applications. For size availability or technical support, contact Ladhani Metal Corporation. #EN10088 #EN100883 #EN100883Steel #EN10088StainlessSteel #StainlessSteel #EuropeanStainlessSteel #ENStandardStainlessSteel #EN10088Supplier #EN10088Manufacturer #EN10088Stockist #EN10088Exporter #StainlessSteelBars #StainlessSteelRods #StainlessSteelWire #StainlessSteelBrightBar #SSRoundBar #SSFlatBar #SSHexBar #SSSquareBar #AusteniticStainlessSteel #FerriticStainlessSteel #MartensiticStainlessSteel #DuplexStainlessSteel #304StainlessSteel #304LStainlessSteel #316StainlessSteel #316LStainlessSteel #2205Duplex #StainlessSteelManufacturers #StainlessSteelSuppliers #StainlessSteelStockist #StainlessSteelExporters #IndianStainlessSteel #SSStockist #SSExporter #SteelIndustry #MetalIndustry #EngineeringSteel #IndustrialSteel #CorrosionResistantSteel #HighStrengthStainlessSteel #WeldableStainlessSteel #MachiningSteel #BrightBars #SteelBars #SteelRods #SteelWire #InfrastructureSteel #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar

EN 10088-3 X2CrNi18-9 is a low-carbon austenitic stainless steel grade designed for applications requiring excellent corrosion resistance, good formability, and improved weldability. With reduced carbon content compared to standard austenitic grades, this steel minimizes the risk of intergranular corrosion after welding. Supplied in rod and bar form, X2CrNi18-9 stainless steel is widely used in fabrication and engineering applications where corrosion resistance and weld integrity are critical. This grade conforms to the EN 10088-3 standard, which specifies technical delivery conditions for stainless steel long products for general purposes. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X2CrNi18-9 stainless steel rods and bars. All materials are sourced from approved mills and supplied in full compliance with EN 10088-3 specifications, ensuring consistent chemical composition, excellent surface finish, and precise dimensional accuracy. Forms of Supply: Round bar, hex bar, square bar, rectangular bar, flat bar, rod Explanation of Designation (X2CrNi18-9): • X – High-alloy steel • 2 – Approx. 0.02% carbon content • Cr18 – Approx. 18% chromium • Ni9 – Approx. 9% nickel Chemical Composition (% – typical limits): • Carbon (C): ≤ 0.03 • Chromium (Cr): 17.0 – 19.0 • Nickel (Ni): 8.0 – 10.0 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 2.00 • Phosphorus (P): ≤ 0.045 • Sulphur (S): ≤ 0.015 • Nitrogen (N): ≤ 0.11 Mechanical Properties (Typical, solution annealed): • Tensile Strength: 500 – 700 MPa • Yield Strength: ≥ 200 MPa • Elongation: ≥ 45% • Hardness: Typically ≤ 215 HB Key Features: • Low-carbon austenitic stainless steel • Excellent corrosion resistance • Improved weldability with reduced risk of intergranular corrosion • Good ductility and formability • Non-magnetic in annealed condition • Suitable for cold working and fabrication Material Characteristics: EN 10088-3 X2CrNi18-9 stainless steel rod and bar provides excellent corrosion resistance combined with good mechanical properties and weldability. Its austenitic microstructure ensures reliable performance in a wide range of industrial and environmental conditions. Applications: • Welded structures and fabricated components • Chemical and petrochemical equipment • Food processing and pharmaceutical equipment • Architectural and structural applications • General engineering and industrial fabrication Conclusion: Ladhani Metal Corporation supplies premium quality EN 10088-3 X2CrNi18-9 stainless steel rods and bars in round, hex, square, rectangular, flat, and rod forms. With excellent corrosion resistance, low carbon content, and good weldability, X2CrNi18-9 stainless steel rod is a dependable choice for fabrication and industrial applications. For size availability or technical support, contact Ladhani Metal Corporation. #EN10088 #EN100883 #EN100883Steel #EN10088StainlessSteel #StainlessSteel #EuropeanStainlessSteel #ENStandardStainlessSteel #EN10088Supplier #EN10088Manufacturer #EN10088Stockist #EN10088Exporter #StainlessSteelBars #StainlessSteelRods #StainlessSteelWire #StainlessSteelBrightBar #SSRoundBar #SSFlatBar #SSHexBar #SSSquareBar #AusteniticStainlessSteel #FerriticStainlessSteel #MartensiticStainlessSteel #DuplexStainlessSteel #304StainlessSteel #304LStainlessSteel #316StainlessSteel #316LStainlessSteel #2205Duplex #StainlessSteelManufacturers #StainlessSteelSuppliers #StainlessSteelStockist #StainlessSteelExporters #IndianStainlessSteel #SSStockist #SSExporter #SteelIndustry #MetalIndustry #EngineeringSteel #IndustrialSteel #CorrosionResistantSteel #HighStrengthStainlessSteel #WeldableStainlessSteel #MachiningSteel #BrightBars #SteelBars #SteelRods #SteelWire #InfrastructureSteel #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar

EN 10088-3 X8CrNiS18-9 is a free-machining austenitic stainless steel grade developed for applications requiring good corrosion resistance, excellent machinability, and reliable mechanical properties. The controlled sulphur addition significantly improves chip breaking and machining performance compared to standard austenitic grades, while maintaining good resistance to atmospheric and mildly corrosive environments. Supplied in bar and rod form, X8CrNiS18-9 stainless steel conforms to the EN 10088-3 standard for stainless steel long products for general purposes. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X8CrNiS18-9 stainless steel rods and bars. All materials are sourced from approved mills and supplied in full compliance with EN 10088-3 specifications, ensuring consistent chemical composition, controlled mechanical properties, and precise dimensional accuracy. Forms of Supply: Round bar, hex bar, square bar, rectangular bar, flat bar, rod Explanation of Designation (X8CrNiS18-9): • X – High-alloy steel • 8 – Approx. 0.08% carbon content • Cr18 – Approx. 18% chromium • Ni9 – Approx. 9% nickel • S – Sulphur addition for enhanced machinability Chemical Composition (% – typical limits): • Carbon (C): ≤ 0.10 • Chromium (Cr): 17.0 – 19.0 • Nickel (Ni): 8.0 – 10.0 • Sulphur (S): 0.15 – 0.35 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 2.00 • Phosphorus (P): ≤ 0.045 Mechanical Properties (Typical, solution annealed): • Tensile Strength: 520 – 750 MPa • Yield Strength: ≥ 230 MPa • Elongation: ≥ 40% • Hardness: Typically ≤ 220 HB Key Features: • Free-machining austenitic stainless steel • Excellent machinability due to sulphur addition • Good corrosion resistance in mildly corrosive environments • Non-magnetic in annealed condition • Good formability and weldability with suitable procedures • Ideal for high-speed machining operations Material Characteristics: EN 10088-3 X8CrNiS18-9 stainless steel rod and bar offers a combination of good corrosion resistance and superior machinability. Its austenitic structure ensures toughness and ductility, making it suitable for precision-machined components with tight tolerances. Applications: • Precision-machined shafts and fittings • Fasteners, screws, and turned components • Automotive and engineering parts • Instrumentation and mechanical assemblies • General machining and industrial components Conclusion: Ladhani Metal Corporation supplies high-quality EN 10088-3 X8CrNiS18-9 stainless steel rods and bars in round, hex, square, rectangular, flat, and rod forms. With excellent machinability, reliable corrosion resistance, and consistent quality, X8CrNiS18-9 stainless steel bar is a preferred choice for precision machining and industrial applications. For size availability or technical support, contact Ladhani Metal Corporation #EN10088 #EN100883 #EN100883Steel #EN10088StainlessSteel #StainlessSteel #EuropeanStainlessSteel #ENStandardStainlessSteel #EN10088Supplier #EN10088Manufacturer #EN10088Stockist #EN10088Exporter #StainlessSteelBars #StainlessSteelRods #StainlessSteelWire #StainlessSteelBrightBar #SSRoundBar #SSFlatBar #SSHexBar #SSSquareBar #AusteniticStainlessSteel #FerriticStainlessSteel #MartensiticStainlessSteel #DuplexStainlessSteel #304StainlessSteel #304LStainlessSteel #316StainlessSteel #316LStainlessSteel #2205Duplex #StainlessSteelManufacturers #StainlessSteelSuppliers #StainlessSteelStockist #StainlessSteelExporters #IndianStainlessSteel #SSStockist #SSExporter #SteelIndustry #MetalIndustry #EngineeringSteel #IndustrialSteel #CorrosionResistantSteel #HighStrengthStainlessSteel #WeldableStainlessSteel #MachiningSteel #BrightBars #SteelBars #SteelRods #SteelWire #InfrastructureSteel #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar

EN 10088-3 X5CrNi18-10 is a widely used austenitic stainless steel grade known for its excellent corrosion resistance, good formability, and reliable mechanical properties. Equivalent to the commonly recognized AISI 304 grade, this steel contains approximately 18% chromium and 10% nickel, providing outstanding resistance to atmospheric corrosion and a wide range of chemical environments. Supplied in rod and bar form, X5CrNi18-10 stainless steel is suitable for general-purpose engineering, fabrication, and industrial applications. This grade conforms to the EN 10088-3 standard, which specifies technical delivery conditions for stainless steel long products for general purposes. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X5CrNi18-10 stainless steel rods and bars. All materials are sourced from approved mills and supplied in full compliance with EN 10088-3 specifications, ensuring consistent chemical composition, excellent surface finish, and precise dimensional accuracy. Forms of Supply: Round bar, hex bar, square bar, rectangular bar, flat bar, rod Explanation of Designation (X5CrNi18-10): • X – High-alloy steel • 5 – Approx. 0.05% carbon content • Cr18 – Approx. 18% chromium • Ni10 – Approx. 10% nickel Chemical Composition (% – typical limits): • Carbon (C): ≤ 0.07 • Chromium (Cr): 17.5 – 19.5 • Nickel (Ni): 8.0 – 10.5 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 2.00 • Phosphorus (P): ≤ 0.045 • Sulphur (S): ≤ 0.015 • Nitrogen (N): ≤ 0.11 Mechanical Properties (Typical, solution annealed): • Tensile Strength: 520 – 720 MPa • Yield Strength: ≥ 210 MPa • Elongation: ≥ 45% • Hardness: Typically ≤ 215 HB Key Features: • Austenitic stainless steel with excellent corrosion resistance • Good formability and ductility • Non-magnetic in annealed condition • Good weldability without preheating • Suitable for cold working and fabrication • Excellent surface finish capability Material Characteristics: EN 10088-3 X5CrNi18-10 stainless steel rod and bar offers excellent corrosion resistance combined with good mechanical strength and formability. Its fully austenitic structure ensures reliable performance in a wide range of industrial and environmental conditions. Applications: • Shafts, fasteners, and fittings • Food processing and pharmaceutical equipment • Chemical and petrochemical components • Architectural and decorative applications • General engineering and fabrication Conclusion: Ladhani Metal Corporation supplies premium quality EN 10088-3 X5CrNi18-10 stainless steel rods and bars in round, hex, square, rectangular, flat, and rod forms. With excellent corrosion resistance, good mechanical properties, and wide usability, X5CrNi18-10 stainless steel rod is a dependable choice for industrial and engineering applications. For size availability or technical support, contact Ladhani Metal Corporation. #EN10088 #EN100883 #EN100883Steel #EN10088StainlessSteel #StainlessSteel #EuropeanStainlessSteel #ENStandardStainlessSteel #EN10088Supplier #EN10088Manufacturer #EN10088Stockist #EN10088Exporter #StainlessSteelBars #StainlessSteelRods #StainlessSteelWire #StainlessSteelBrightBar #SSRoundBar #SSFlatBar #SSHexBar #SSSquareBar #AusteniticStainlessSteel #FerriticStainlessSteel #MartensiticStainlessSteel #DuplexStainlessSteel #304StainlessSteel #304LStainlessSteel #316StainlessSteel #316LStainlessSteel #2205Duplex #StainlessSteelManufacturers #StainlessSteelSuppliers #StainlessSteelStockist #StainlessSteelExporters #IndianStainlessSteel #SSStockist #SSExporter #SteelIndustry #MetalIndustry #EngineeringSteel #IndustrialSteel #CorrosionResistantSteel #HighStrengthStainlessSteel #WeldableStainlessSteel #MachiningSteel #BrightBars #SteelBars #SteelRods #SteelWire #InfrastructureSteel #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar

EN 10088-3 X40CrMoVN16-2 is a martensitic stainless steel grade designed for applications requiring high strength, excellent toughness, good corrosion resistance, and superior fatigue performance. The combined addition of chromium, molybdenum, vanadium, and nitrogen improves hardenability, wear resistance, and grain refinement, making this grade suitable for demanding mechanical and engineering applications. Supplied in bar and rod form, X40CrMoVN16-2 stainless steel complies with the EN 10088-3 standard for stainless steel long products. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X40CrMoVN16-2 stainless steel rods and bars. All materials are sourced from approved mills and supplied in full compliance with EN 10088-3 specifications, ensuring consistent chemical composition, controlled mechanical properties, and accurate dimensional tolerances. Forms of Supply: Round bar, hex bar, square bar, rectangular bar, flat bar, rod Explanation of Designation (X40CrMoVN16-2): • X – High-alloy steel • 40 – Approx. 0.40% carbon content • Cr16 – Approx. 16% chromium • Mo – Molybdenum addition for improved strength and corrosion resistance • V – Vanadium addition for grain refinement and wear resistance • N – Nitrogen addition for enhanced strength and toughness Chemical Composition (% – typical limits): • Carbon (C): 0.36 – 0.44 • Chromium (Cr): 15.0 – 17.0 • Molybdenum (Mo): 0.80 – 1.20 • Vanadium (V): 0.10 – 0.30 • Nitrogen (N): 0.03 – 0.10 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 1.00 • Phosphorus (P): ≤ 0.040 • Sulphur (S): ≤ 0.015 Mechanical Properties (Typical, depending on heat treatment): • Tensile Strength: 900 – 1,100 MPa • Yield Strength: ≥ 700 MPa • Elongation: 10 – 14% • Hardness: Can be significantly increased by quenching and tempering Key Features: • High-strength martensitic stainless steel • Excellent toughness and fatigue resistance • Improved wear resistance due to Mo and V additions • Good corrosion resistance compared to standard martensitic grades • Heat-treatable for enhanced mechanical performance • Suitable for high-load and dynamic applications Material Characteristics: EN 10088-3 X40CrMoVN16-2 stainless steel rod and bar offers a strong combination of strength, toughness, and corrosion resistance. Its martensitic microstructure, refined by vanadium and nitrogen, ensures reliable performance under high stress and cyclic loading conditions. Applications: • Turbine and power plant components • Shafts, rotors, and spindles • High-performance mechanical and structural parts • Pump and valve components • Engineering and industrial machinery Conclusion: Ladhani Metal Corporation supplies high-quality EN 10088-3 X40CrMoVN16-2 stainless steel rods and bars in round, hex, square, rectangular, flat, and rod forms. With excellent mechanical strength, toughness, and wear resistance, X40CrMoVN16-2 stainless steel bar is a reliable choice for demanding engineering and industrial applications. For size availability or technical support, contact Ladhani Metal Corporation. #EN10088 #EN100883 #EN100883Steel #EN10088StainlessSteel #StainlessSteel #EuropeanStainlessSteel #ENStandardStainlessSteel #EN10088Supplier #EN10088Manufacturer #EN10088Stockist #EN10088Exporter #StainlessSteelBars #StainlessSteelRods #StainlessSteelWire #StainlessSteelBrightBar #SSRoundBar #SSFlatBar #SSHexBar #SSSquareBar #AusteniticStainlessSteel #FerriticStainlessSteel #MartensiticStainlessSteel #DuplexStainlessSteel #304StainlessSteel #304LStainlessSteel #316StainlessSteel #316LStainlessSteel #2205Duplex #StainlessSteelManufacturers #StainlessSteelSuppliers #StainlessSteelStockist #StainlessSteelExporters #IndianStainlessSteel #SSStockist #SSExporter #SteelIndustry #MetalIndustry #EngineeringSteel #IndustrialSteel #CorrosionResistantSteel #HighStrengthStainlessSteel #WeldableStainlessSteel #MachiningSteel #BrightBars #SteelBars #SteelRods #SteelWire #InfrastructureSteel #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar

EN 10088-3 X90CrMoV18 is a high-carbon martensitic stainless steel grade developed for applications requiring extremely high hardness, superior wear resistance, and excellent edge retention. Alloyed with chromium, molybdenum, and vanadium, this grade provides outstanding hardenability and enhanced abrasion resistance after heat treatment. Supplied in bar and rod form, X90CrMoV18 stainless steel is widely used in demanding tooling and precision engineering applications. This grade conforms to the EN 10088-3 standard, which specifies technical delivery conditions for stainless steel long products for general purposes. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X90CrMoV18 stainless steel rods and bars. All materials are sourced from approved mills and supplied in full compliance with EN 10088-3 specifications, ensuring consistent chemical composition, controlled mechanical properties, and precise dimensional accuracy. Forms of Supply: Round bar, hex bar, square bar, rectangular bar, flat bar, rod Explanation of Designation (X90CrMoV18): • X – High-alloy steel • 90 – Approx. 0.90% carbon content • Cr18 – Approx. 18% chromium • Mo – Molybdenum addition for improved hardenability and wear resistance • V – Vanadium addition for grain refinement and enhanced abrasion resistance Chemical Composition (% – typical limits): • Carbon (C): 0.85 – 0.95 • Chromium (Cr): 17.0 – 19.0 • Molybdenum (Mo): 0.80 – 1.20 • Vanadium (V): 0.10 – 0.30 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 1.00 • Phosphorus (P): ≤ 0.040 • Sulphur (S): ≤ 0.015 Mechanical Properties (Typical, depending on heat treatment): • Tensile Strength: 1,000 – 1,300 MPa • Yield Strength: ≥ 800 MPa • Elongation: 5 – 8% • Hardness: Can be significantly increased by quenching and tempering Key Features: • Ultra-high-carbon martensitic stainless steel • Exceptional hardness and wear resistance • Excellent edge retention and abrasion resistance • Good corrosion resistance for a martensitic grade • Heat-treatable for extreme mechanical performance • Suitable for heavy-duty tooling and precision applications Material Characteristics: EN 10088-3 X90CrMoV18 stainless steel rod and bar delivers outstanding wear resistance and hardness due to its high carbon and alloy content. Its martensitic microstructure, enhanced by molybdenum and vanadium, ensures long service life in severe operating conditions. Applications: • Industrial cutting tools and blades • Dies, punches, and wear plates • Precision tooling and machine components • Bearing and wear-resistant parts • High-load mechanical and engineering applications Conclusion: Ladhani Metal Corporation supplies premium quality EN 10088-3 X90CrMoV18 stainless steel rods and bars in round, hex, square, rectangular, flat, and rod forms. With exceptional hardness potential, superior wear resistance, and reliable corrosion performance, X90CrMoV18 stainless steel bar is an excellent choice for demanding tooling and industrial applications. For size availability or technical assistance, contact Ladhani Metal Corporation. #EN10088 #EN100883 #EN100883Steel #EN10088StainlessSteel #StainlessSteel #EuropeanStainlessSteel #ENStandardStainlessSteel #EN10088Supplier #EN10088Manufacturer #EN10088Stockist #EN10088Exporter #StainlessSteelBars #StainlessSteelRods #StainlessSteelWire #StainlessSteelBrightBar #SSRoundBar #SSFlatBar #SSHexBar #SSSquareBar #AusteniticStainlessSteel #FerriticStainlessSteel #MartensiticStainlessSteel #DuplexStainlessSteel #304StainlessSteel #304LStainlessSteel #316StainlessSteel #316LStainlessSteel #2205Duplex #StainlessSteelManufacturers #StainlessSteelSuppliers #StainlessSteelStockist #StainlessSteelExporters #IndianStainlessSteel #SSStockist #SSExporter #SteelIndustry #MetalIndustry #EngineeringSteel #IndustrialSteel #CorrosionResistantSteel #HighStrengthStainlessSteel #WeldableStainlessSteel #MachiningSteel #BrightBars #SteelBars #SteelRods #SteelWire #InfrastructureSteel #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar

EN 10088-3 X70CrMo15 is a high-carbon martensitic stainless steel grade engineered for applications requiring very high hardness, excellent wear resistance, and good corrosion resistance. With high carbon content and alloying elements such as chromium and molybdenum, this grade delivers outstanding edge retention and mechanical strength after heat treatment. Supplied in rod and bar form, X70CrMo15 stainless steel is commonly used in precision, tooling, and wear-resistant components. This grade conforms to the EN 10088-3 standard, which specifies technical delivery conditions for stainless steel long products for general purposes. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X70CrMo15 stainless steel rods and bars. All materials are sourced from approved mills and supplied in full compliance with EN 10088-3 specifications, ensuring consistent chemical composition, controlled mechanical properties, and precise dimensional accuracy. Forms of Supply: Round bar, hex bar, square bar, rectangular bar, flat bar, rod Explanation of Designation (X70CrMo15): • X – High-alloy steel • 70 – Approx. 0.70% carbon content • Cr15 – Approx. 15% chromium • Mo – Molybdenum addition for improved hardenability and wear resistance Chemical Composition (% – typical limits): • Carbon (C): 0.65 – 0.75 • Chromium (Cr): 14.0 – 15.5 • Molybdenum (Mo): 0.50 – 0.80 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 1.00 • Phosphorus (P): ≤ 0.040 • Sulphur (S): ≤ 0.015 Mechanical Properties (Typical, depending on heat treatment): • Tensile Strength: 900 – 1,150 MPa • Yield Strength: ≥ 700 MPa • Elongation: 6 – 10% • Hardness: Can be significantly increased by quenching and tempering Key Features: • High-carbon martensitic stainless steel • Excellent hardness and wear resistance • Good corrosion resistance compared to standard martensitic grades • Outstanding edge retention after heat treatment • Heat-treatable for maximum mechanical performance • Suitable for precision and high-wear applications Material Characteristics: EN 10088-3 X70CrMo15 stainless steel rod and bar combines very high hardness potential with good corrosion resistance and mechanical strength. Its martensitic microstructure enables superior wear performance, making it ideal for components subjected to continuous abrasion and mechanical stress. Applications: • Cutting tools and industrial blades • Bearing components and wear parts • Shafts, pins, and spindles • Pump and valve components • Precision engineering and tooling Conclusion: Ladhani Metal Corporation supplies high-quality EN 10088-3 X70CrMo15 stainless steel rods and bars in round, hex, square, rectangular, flat, and rod forms. With exceptional wear resistance, high hardness capability, and reliable corrosion resistance, X70CrMo15 stainless steel rod is an excellent choice for demanding industrial and engineering applications. For size availability or technical support, contact Ladhani Metal Corporation. #EN10088 #EN100883 #EN100883Steel #EN10088StainlessSteel #StainlessSteel #EuropeanStainlessSteel #ENStandardStainlessSteel #EN10088Supplier #EN10088Manufacturer #EN10088Stockist #EN10088Exporter #StainlessSteelBars #StainlessSteelRods #StainlessSteelWire #StainlessSteelBrightBar #SSRoundBar #SSFlatBar #SSHexBar #SSSquareBar #AusteniticStainlessSteel #FerriticStainlessSteel #MartensiticStainlessSteel #DuplexStainlessSteel #304StainlessSteel #304LStainlessSteel #316StainlessSteel #316LStainlessSteel #2205Duplex #StainlessSteelManufacturers #StainlessSteelSuppliers #StainlessSteelStockist #StainlessSteelExporters #IndianStainlessSteel #SSStockist #SSExporter #SteelIndustry #MetalIndustry #EngineeringSteel #IndustrialSteel #CorrosionResistantSteel #HighStrengthStainlessSteel #WeldableStainlessSteel #MachiningSteel #BrightBars #SteelBars #SteelRods #SteelWire #InfrastructureSteel #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar

EN 10088-3 X14CrMoS17 is a free-machining martensitic stainless steel grade designed for applications requiring good strength, enhanced machinability, improved wear resistance, and moderate corrosion resistance. The addition of molybdenum improves hardenability and resistance to pitting, while sulphur enhances machinability, making this grade ideal for precision machining and mass-produced components. Supplied in bar and rod form, X14CrMoS17 stainless steel conforms to the EN 10088-3 standard, which specifies technical delivery conditions for stainless steel long products for general purposes. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X14CrMoS17 stainless steel rods and bars. All materials are sourced from approved mills and supplied in full compliance with EN 10088-3 requirements, ensuring consistent chemical composition, controlled mechanical properties, and precise dimensional accuracy. Forms of Supply: Round bar, hex bar, square bar, rectangular bar, flat bar, rod Explanation of Designation (X14CrMoS17): • X – High-alloy steel • 14 – Approx. 0.14% carbon content • Cr17 – Approx. 17% chromium • Mo – Molybdenum addition for improved strength and corrosion resistance • S – Sulphur addition for enhanced machinability Chemical Composition (% – typical limits): • Carbon (C): 0.12 – 0.18 • Chromium (Cr): 16.0 – 18.0 • Molybdenum (Mo): 0.30 – 0.60 • Sulphur (S): 0.15 – 0.35 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 1.00 • Phosphorus (P): ≤ 0.040 Mechanical Properties (Typical, depending on heat treatment): • Tensile Strength: 700 – 900 MPa • Yield Strength: ≥ 500 MPa • Elongation: 10 – 14% • Hardness: Can be increased by quenching and tempering Key Features: • Free-machining martensitic stainless steel • Improved machinability due to sulphur addition • Good strength and wear resistance • Better pitting resistance compared to standard 13% Cr grades • Heat-treatable for enhanced mechanical performance • Suitable for precision-machined components Material Characteristics: EN 10088-3 X14CrMoS17 stainless steel rod and bar offers a balanced combination of strength, machinability, and corrosion resistance. Its martensitic structure allows effective heat treatment while maintaining excellent machining performance for high-volume production. Applications: • Precision-machined shafts and pins • Valve and pump components • Fasteners and fittings • Automotive and engineering parts • Industrial machinery components Conclusion: Ladhani Metal Corporation supplies premium quality EN 10088-3 X14CrMoS17 stainless steel rods and bars in round, hex, square, rectangular, flat, and rod forms. With enhanced machinability, reliable strength, and improved corrosion resistance, X14CrMoS17 stainless steel bar is a dependable choice for precision engineering and industrial applications. For size availability or technical assistance, contact Ladhani Metal Corporation. #EN10088 #EN100883 #EN100883Steel #EN10088StainlessSteel #StainlessSteel #EuropeanStainlessSteel #ENStandardStainlessSteel #EN10088Supplier #EN10088Manufacturer #EN10088Stockist #EN10088Exporter #StainlessSteelBars #StainlessSteelRods #StainlessSteelWire #StainlessSteelBrightBar #SSRoundBar #SSFlatBar #SSHexBar #SSSquareBar #AusteniticStainlessSteel #FerriticStainlessSteel #MartensiticStainlessSteel #DuplexStainlessSteel #304StainlessSteel #304LStainlessSteel #316StainlessSteel #316LStainlessSteel #2205Duplex #StainlessSteelManufacturers #StainlessSteelSuppliers #StainlessSteelStockist #StainlessSteelExporters #IndianStainlessSteel #SSStockist #SSExporter #SteelIndustry #MetalIndustry #EngineeringSteel #IndustrialSteel #CorrosionResistantSteel #HighStrengthStainlessSteel #WeldableStainlessSteel #MachiningSteel #BrightBars #SteelBars #SteelRods #SteelWire #InfrastructureSteel #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar

EN 10088-3 X46CrS13 is a free-machining martensitic stainless steel grade designed for applications requiring high hardness, good wear resistance, and improved machinability. The controlled sulphur addition enhances chip formation, making this grade especially suitable for precision machining and mass-production components. With higher carbon content than X39Cr13, X46CrS13 can achieve very high hardness after quenching and tempering while maintaining moderate corrosion resistance. Supplied in rod and bar form, this grade complies with the EN 10088-3 standard for stainless steel long products. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X46CrS13 stainless steel rods and bars. All materials are sourced from approved mills and supplied in accordance with EN 10088-3 requirements, ensuring consistent chemical composition, controlled mechanical properties, and accurate dimensional tolerances. Forms of Supply: Round bar, hex bar, square bar, rectangular bar, flat bar, rod Explanation of Designation (X46CrS13): • X – High-alloy steel • 46 – Approx. 0.46% carbon content • Cr13 – Approx. 13% chromium • S – Sulphur addition for improved machinability Chemical Composition (% – typical limits): • Carbon (C): 0.42 – 0.50 • Chromium (Cr): 12.0 – 14.0 • Sulphur (S): 0.15 – 0.35 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 1.00 • Phosphorus (P): ≤ 0.040 Mechanical Properties (Typical, depending on heat treatment): • Tensile Strength: 950 – 1,150 MPa • Yield Strength: ≥ 750 MPa • Elongation: 6 – 10% • Hardness: Can be significantly increased by quenching and tempering Key Features: • Free-machining martensitic stainless steel • Very high hardness and wear resistance after heat treatment • Improved machinability due to sulphur addition • Moderate corrosion resistance in mildly corrosive environments • Suitable for precision-machined components Material Characteristics: EN 10088-3 X46CrS13 stainless steel rod and bar offers a combination of very high hardness, good wear resistance, and enhanced machinability. Its martensitic microstructure allows efficient heat treatment, making it ideal for components requiring tight tolerances and high surface finish. Applications: • Precision-machined shafts and pins • Valve parts and pump components • Fasteners and fittings • Industrial tooling and wear parts • Mechanical and engineering components Conclusion: Ladhani Metal Corporation supplies high-quality EN 10088-3 X46CrS13 stainless steel rods and bars in round, hex, square, rectangular, flat, and rod forms. With excellent machinability, high hardness potential, and reliable mechanical performance, X46CrS13 stainless steel rod is a preferred choice for demanding machining and industrial applications. For size availability or technical support, contact Ladhani Metal Corporation. #EN10088 #EN100883 #EN100883Steel #EN10088StainlessSteel #StainlessSteel #EuropeanStainlessSteel #ENStandardStainlessSteel #EN10088Supplier #EN10088Manufacturer #EN10088Stockist #EN10088Exporter #StainlessSteelBars #StainlessSteelRods #StainlessSteelWire #StainlessSteelBrightBar #SSRoundBar #SSFlatBar #SSHexBar #SSSquareBar #AusteniticStainlessSteel #FerriticStainlessSteel #MartensiticStainlessSteel #DuplexStainlessSteel #304StainlessSteel #304LStainlessSteel #316StainlessSteel #316LStainlessSteel #2205Duplex #StainlessSteelManufacturers #StainlessSteelSuppliers #StainlessSteelStockist #StainlessSteelExporters #IndianStainlessSteel #SSStockist #SSExporter #SteelIndustry #MetalIndustry #EngineeringSteel #IndustrialSteel #CorrosionResistantSteel #HighStrengthStainlessSteel #WeldableStainlessSteel #MachiningSteel #BrightBars #SteelBars #SteelRods #SteelWire #InfrastructureSteel #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar