en 10083 3 alloy bars and plates

EN 10083-3 37Cr4 is a chromium alloy steel grade designed for applications requiring good strength, enhanced hardenability, and reliable wear resistance after heat treatment. With a nominal carbon content of approximately 0.37% and chromium as the primary alloying element, 37Cr4 steel provides improved mechanical properties compared to non-alloy carbon steels. 37Cr4 alloy steel bars are widely used in engineering components subjected to torsion, bending, and moderate to high dynamic loads. The material is manufactured in accordance with EN 10083-3, which specifies technical delivery conditions for alloy steels for quenching and tempering. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10083-3 37Cr4 alloy steel bars, supplied with certified mill test certificates and strict quality control to meet international standards. Forms of Supply (as per grade): Hot rolled round bars, black round bars, forged bars, peeled bars, bright round bars, square bars, flat bars Explanation of Designation (37Cr4): • 37 – Approx. 0.37% carbon content • Cr – Chromium for improved strength, wear resistance, and hardenability • 4 – Indicates chromium content range as per EN standard Chemical Composition (% – typical limits): • Carbon (C): 0.34 – 0.41 • Manganese (Mn): 0.60 – 0.90 • Silicon (Si): ≤ 0.40 • Chromium (Cr): 0.90 – 1.20 • Phosphorus (P): ≤ 0.025 • Sulphur (S): ≤ 0.035 Mechanical Properties (Typical, quenched & tempered condition): • Tensile Strength: 850 – 1050 MPa • Yield Strength: ≥ 650 MPa • Elongation: ≥ 11% • Hardness: 250 – 320 HB (depending on heat treatment) Key Features: • Chromium alloy steel with good strength and toughness • Improved hardenability over plain carbon steels • Good wear and fatigue resistance • Suitable for quenching and tempering applications • Reliable performance under dynamic loading Material Characteristics: EN 10083-3 37Cr4 alloy steel bar offers a strong balance between strength and toughness. The chromium addition enhances hardenability, allowing uniform mechanical properties in medium-sized sections after heat treatment. It is suitable for components that require both surface hardness and core toughness. Applications: • Shafts and axles • Gears and transmission components • Automotive and machinery parts • Bolts, studs, and fasteners • General engineering and heat-treated mechanical components Conclusion: Ladhani Metal Corporation supplies premium quality EN 10083-3 37Cr4 alloy steel bars in various sizes and finishes to meet demanding industrial requirements. With reliable strength, good wear resistance, and excellent heat treatment response, 37Cr4 steel bars are suitable for a wide range of engineering and mechanical applications. For size availability, technical specifications, or customized supply requirements, contact Ladhani Metal Corporation. #EN10083 #EN100833 #EN100833Steel #EN10083AlloySteel #EN10083EngineeringSteel #ENStandardSteel #AlloySteel #ChromiumSteel #34Cr4 #42Cr4 #50Cr4 #EngineeringSteelBars #AlloySteelBars #AlloySteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #ShaftSteel #GearSteel #AxleSteel #CrankshaftSteel #BoltSteel #MachinePartsSteel #HeatTreatableSteel #NormalizedSteel #AnnealedSteel #QuenchedTemperedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #AlloySteelSupplier #EN100833Supplier #EN100833Manufacturer #EN100833Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #InfrastructureSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Kochi #Trivandrum #Goa #Aurangabad #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Bhavnagar

EN 10083-3 34Cr4 is a chromium alloy steel grade developed for applications requiring good strength, improved hardenability, and enhanced wear resistance after heat treatment. With a nominal carbon content of approximately 0.34% and chromium as the principal alloying element, 34Cr4 steel offers a reliable balance of toughness and mechanical strength. 34Cr4 alloy steel plates are widely used in structural and mechanical components subjected to moderate to high stress conditions. The material is manufactured in accordance with EN 10083-3, which specifies technical delivery conditions for alloy steels for quenching and tempering. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10083-3 34Cr4 alloy steel plates, supplied with certified chemical composition and controlled mechanical properties as per EN standards. Forms of Supply (as per grade): Hot rolled plates, normalized plates, annealed plates, quenched and tempered plates, flame cut plates, cut-to-size plates Explanation of Designation (34Cr4): • 34 – Approx. 0.34% carbon content • Cr – Chromium for improved strength, wear resistance, and hardenability • 4 – Indicates chromium content range as per EN standard Chemical Composition (% – typical limits): • Carbon (C): 0.30 – 0.37 • Manganese (Mn): 0.60 – 0.90 • Silicon (Si): ≤ 0.40 • Chromium (Cr): 0.90 – 1.20 • Phosphorus (P): ≤ 0.025 • Sulphur (S): ≤ 0.035 Mechanical Properties (Typical, quenched & tempered condition): • Tensile Strength: 800 – 1000 MPa • Yield Strength: ≥ 600 MPa • Elongation: ≥ 12% • Hardness: 230 – 300 HB (depending on heat treatment) Key Features: • Chromium alloy steel with good strength and toughness • Improved hardenability compared to carbon steels • Good wear and fatigue resistance • Suitable for quenching and tempering • Reliable mechanical performance in structural applications Material Characteristics: EN 10083-3 34Cr4 alloy steel plate provides a dependable combination of strength, toughness, and wear resistance. The chromium content enhances hardenability and allows the material to achieve improved mechanical properties after heat treatment, making it suitable for load-bearing components. Applications: • Structural and fabricated engineering parts • Shafts and mechanical components • Automotive and heavy machinery parts • Heat-treated plates for high-strength applications • General engineering and industrial uses Conclusion: Ladhani Metal Corporation supplies high-quality EN 10083-3 34Cr4 alloy steel plates in various thicknesses and heat-treated conditions. With good strength, enhanced hardenability, and reliable performance, 34Cr4 steel plates are suitable for a wide range of engineering and industrial applications. For size availability, technical specifications, or customized requirements, contact Ladhani Metal Corporation. #EN10083 #EN100833 #EN100833Steel #EN10083AlloySteel #EN10083EngineeringSteel #ENStandardSteel #AlloySteel #ChromiumSteel #34Cr4 #42Cr4 #50Cr4 #EngineeringSteelBars #AlloySteelBars #AlloySteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #ShaftSteel #GearSteel #AxleSteel #CrankshaftSteel #BoltSteel #MachinePartsSteel #HeatTreatableSteel #NormalizedSteel #AnnealedSteel #QuenchedTemperedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #AlloySteelSupplier #EN100833Supplier #EN100833Manufacturer #EN100833Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #InfrastructureSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Kochi #Trivandrum #Goa #Aurangabad #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Bhavnagar

EN 10083-3 46Cr2 is a chromium alloy steel grade developed for applications requiring high strength, improved wear resistance, and good hardenability after heat treatment. With a nominal carbon content of approximately 0.46%, this grade provides higher strength and hardness compared to lower carbon chromium steels. The addition of chromium enhances hardenability, surface hardness, and resistance to abrasion. 46Cr2 alloy steel bars are widely used in components subjected to high mechanical loads, torsion, and wear conditions. The material is manufactured in accordance with EN 10083-3, which specifies technical delivery conditions for alloy steels for quenching and tempering. Ladhani Metal Corporation is a reliable manufacturer, supplier, and exporter of EN 10083-3 46Cr2 alloy steel bars, supplied with certified mill test certificates and strict quality control. Forms of Supply (as per grade): Hot rolled round bars, black round bars, forged bars, peeled bars, bright round bars, square bars, flat bars Explanation of Designation (46Cr2): • 46 – Approx. 0.46% carbon content • Cr – Chromium for improved strength, wear resistance, and hardenability • 2 – Indicates chromium content range as per EN standard Chemical Composition (% – typical limits): • Carbon (C): 0.43 – 0.50 • Manganese (Mn): 0.60 – 0.90 • Silicon (Si): ≤ 0.40 • Chromium (Cr): 0.40 – 0.70 • Phosphorus (P): ≤ 0.025 • Sulphur (S): ≤ 0.035 Mechanical Properties (Typical, quenched & tempered condition): • Tensile Strength: 850 – 1050 MPa • Yield Strength: ≥ 650 MPa • Elongation: ≥ 10% • Hardness: 250 – 320 HB (depending on heat treatment) Key Features: • Higher carbon chromium steel with improved hardness • Good hardenability and wear resistance • Suitable for surface hardening applications • Good fatigue resistance under dynamic loading • Reliable performance in heat-treated condition Material Characteristics: EN 10083-3 46Cr2 alloy steel bars offer a strong combination of strength and abrasion resistance. The higher carbon content allows the material to achieve greater hardness after heat treatment, while chromium enhances hardenability and durability. Applications: • Shafts and axles • Gears and pinions • High-strength mechanical components • Automotive transmission parts • Wear-resistant engineering components Conclusion: Ladhani Metal Corporation supplies premium quality EN 10083-3 46Cr2 alloy steel bars in various sizes and finishes to meet industrial and engineering requirements. With high strength, good wear resistance, and reliable heat treatment response, 46Cr2 steel bars are suitable for demanding mechanical applications. For size availability, technical specifications, or customized supply requirements, contact Ladhani Metal Corporation. #EN10083 #EN100833 #EN100833Steel #EN10083AlloySteel #EN10083EngineeringSteel #ENStandardSteel #AlloySteel #ChromiumSteel #34Cr4 #42Cr4 #50Cr4 #EngineeringSteelBars #AlloySteelBars #AlloySteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #ShaftSteel #GearSteel #AxleSteel #CrankshaftSteel #BoltSteel #MachinePartsSteel #HeatTreatableSteel #NormalizedSteel #AnnealedSteel #QuenchedTemperedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #AlloySteelSupplier #EN100833Supplier #EN100833Manufacturer #EN100833Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #InfrastructureSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Kochi #Trivandrum #Goa #Aurangabad #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Bhavnagar

EN 10083-3 30NiCrMo16-6 is a high-strength nickel-chromium-molybdenum alloy steel grade developed for applications requiring exceptional toughness, very high hardenability, and superior fatigue resistance after quenching and tempering. With a nominal carbon content of approximately 0.30% and higher nickel content compared to standard Cr-Ni-Mo grades, this steel offers outstanding impact strength and uniform mechanical properties even in heavy sections. 30NiCrMo16-6 is widely used in critical engineering, defense, heavy machinery, and power transmission components where reliability under extreme loading conditions is essential. The material is produced in accordance with EN 10083-3, which specifies technical delivery conditions for alloy steels for quenching and tempering. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10083-3 30NiCrMo16-6 alloy steel plates and bars, supplied with certified mill test certificates and strict quality control. Forms of Supply (as per grade): Hot rolled plates, normalized plates, quenched and tempered plates, flame cut plates, cut-to-size plates, hot rolled round bars, black round bars, forged bars, peeled bars, bright round bars, square bars, flat bars Explanation of Designation (30NiCrMo16-6): • 30 – Approx. 0.30% carbon content • Ni – Nickel for superior toughness and impact resistance • Cr – Chromium for strength and hardenability • Mo – Molybdenum for improved fatigue resistance and tempering stability • 16-6 – Indicates alloying content range as per EN standard (higher nickel content category) Chemical Composition (% – typical limits): • Carbon (C): 0.26 – 0.34 • Manganese (Mn): 0.40 – 0.70 • Silicon (Si): ≤ 0.40 • Nickel (Ni): 3.50 – 4.00 • Chromium (Cr): 1.30 – 1.70 • Molybdenum (Mo): 0.30 – 0.50 • Phosphorus (P): ≤ 0.025 • Sulphur (S): ≤ 0.035 Mechanical Properties (Typical, quenched & tempered condition): • Tensile Strength: 1000 – 1200 MPa (depending on section size and heat treatment) • Yield Strength: ≥ 850 MPa • Elongation: ≥ 11% • Hardness: 300 – 360 HB • Excellent impact strength even at low temperatures Key Features: • High Ni-Cr-Mo alloy steel with exceptional toughness • Excellent hardenability for thick plates and large diameter bars • Superior fatigue and impact resistance • Good resistance to temper brittleness • Suitable for highly stressed and safety-critical components Material Characteristics: EN 10083-3 30NiCrMo16-6 alloy steel in plate and bar form provides outstanding mechanical performance in heavy sections due to its high nickel content. It ensures deep hardening capability and uniform strength distribution after heat treatment, making it ideal for critical load-bearing applications. Applications: • Heavy-duty shafts and axles • High-strength gears and transmission components • Defense and aerospace structural parts • Large forged components • Power generation and heavy machinery equipment Conclusion: Ladhani Metal Corporation supplies premium quality EN 10083-3 30NiCrMo16-6 alloy steel plates and bars in various sizes, finishes, and heat-treated conditions. With its exceptional toughness, high strength, and superior hardenability, this grade is a reliable choice for demanding industrial and engineering applications. For size availability, technical specifications, or customized requirements, contact Ladhani Metal Corporation. #EN10083 #EN100833 #EN100833Steel #EN10083AlloySteel #EN10083EngineeringSteel #ENStandardSteel #AlloySteel #ChromiumSteel #34Cr4 #42Cr4 #50Cr4 #EngineeringSteelBars #AlloySteelBars #AlloySteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #ShaftSteel #GearSteel #AxleSteel #CrankshaftSteel #BoltSteel #MachinePartsSteel #HeatTreatableSteel #NormalizedSteel #AnnealedSteel #QuenchedTemperedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #AlloySteelSupplier #EN100833Supplier #EN100833Manufacturer #EN100833Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #InfrastructureSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Kochi #Trivandrum #Goa #Aurangabad #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Bhavnagar

EN 10083-3 34CrNiMo6 is a high-strength chromium-nickel-molybdenum alloy steel grade designed for components subjected to heavy dynamic loads and high stress conditions. With a nominal carbon content of approximately 0.34% and alloying additions of chromium, nickel, and molybdenum, this grade offers excellent hardenability, superior toughness, and outstanding fatigue resistance after quenching and tempering. EN 10083-3 34CrNiMo6 alloy steel bars are widely used in automotive, heavy engineering, oil & gas, and power transmission applications. The material is manufactured in accordance with EN 10083-3, which specifies technical delivery conditions for alloy steels for quenching and tempering. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10083-3 34CrNiMo6 alloy steel bars, supplied with certified chemical composition and controlled mechanical properties to meet international standards. Forms of Supply (as per grade): Hot rolled round bars, black round bars, forged bars, peeled bars, bright round bars, square bars, flat bars Explanation of Designation (34CrNiMo6): • 34 – Approx. 0.34% carbon content • Cr – Chromium for strength, wear resistance, and hardenability • Ni – Nickel for improved toughness and impact strength • Mo – Molybdenum for enhanced hardenability, fatigue strength, and resistance to tempering softening • 6 – Indicates alloying content range as per EN standard Chemical Composition (% – typical limits): • Carbon (C): 0.30 – 0.38 • Manganese (Mn): 0.50 – 0.80 • Silicon (Si): ≤ 0.40 • Chromium (Cr): 1.30 – 1.70 • Nickel (Ni): 1.30 – 1.70 • Molybdenum (Mo): 0.15 – 0.30 • Phosphorus (P): ≤ 0.025 • Sulphur (S): ≤ 0.035 Mechanical Properties (Typical, quenched & tempered condition): • Tensile Strength: 900 – 1100 MPa (can reach higher depending on section size and heat treatment) • Yield Strength: ≥ 750 MPa • Elongation: ≥ 12% • Impact Strength: Excellent toughness even at low temperatures • Hardness: 280 – 320 HB (after heat treatment) Key Features: • High-strength Cr-Ni-Mo alloy steel • Excellent hardenability for large diameter bars • Superior fatigue and impact resistance • Very good machinability in normalized or annealed condition • Reliable performance in heavy-duty and safety-critical components Material Characteristics: EN 10083-3 34CrNiMo6 alloy steel bar combines high strength with excellent toughness and fatigue resistance. Due to its strong hardenability, it maintains uniform mechanical properties across large cross sections. The presence of molybdenum improves resistance to temper brittleness and enhances high-temperature strength. Applications: • Crankshafts and camshafts • Heavy-duty shafts and axles • Gears, pinions, and couplings • Oil & gas components • Bolts, studs, and high-strength fasteners • Forged and machined mechanical parts Conclusion: Ladhani Metal Corporation supplies premium quality EN 10083-3 34CrNiMo6 alloy steel bars in various sizes and finishes to meet demanding engineering requirements. With its excellent strength, toughness, and fatigue resistance, 34CrNiMo6 is an ideal choice for critical mechanical and structural applications. For size availability, technical data, or customized supply requirements, contact Ladhani Metal Corporation. #EN10083 #EN100833 #EN100833Steel #EN10083AlloySteel #EN10083EngineeringSteel #ENStandardSteel #AlloySteel #ChromiumSteel #34Cr4 #42Cr4 #50Cr4 #EngineeringSteelBars #AlloySteelBars #AlloySteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #ShaftSteel #GearSteel #AxleSteel #CrankshaftSteel #BoltSteel #MachinePartsSteel #HeatTreatableSteel #NormalizedSteel #AnnealedSteel #QuenchedTemperedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #AlloySteelSupplier #EN100833Supplier #EN100833Manufacturer #EN100833Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #InfrastructureSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Kochi #Trivandrum #Goa #Aurangabad #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Bhavnagar

EN 10083-3 30CrNiMo8 is a high-performance chromium-nickel-molybdenum alloy steel grade designed for applications requiring very high strength, excellent toughness, and outstanding hardenability after heat treatment. With a nominal carbon content of around 0.30% and the balanced addition of chromium, nickel, and molybdenum, 30CrNiMo8 steel offers exceptional fatigue strength and impact resistance, even in large cross-section components. Supplied in plate and bar form, EN 10083-3 30CrNiMo8 alloy steel is widely used in heavy engineering, automotive, defense, and power transmission applications. This grade is manufactured in accordance with EN 10083-3, which specifies technical delivery conditions for alloy steels for quenching and tempering. Ladhani Metal Corporation is a reliable manufacturer, supplier, and exporter of EN 10083-3 30CrNiMo8 alloy steel plates and bars. Our materials are sourced from approved mills and supplied with controlled chemical composition, consistent mechanical properties, and precise dimensional accuracy as per EN 10083-3 requirements. Forms of Supply (as per grade): Hot rolled plates, normalized plates, quenched and tempered plates, cut-to-size plates, hot rolled round bars, black round bars, forged bars, peeled bars, bright round bars, square bars, flat bars Explanation of Designation (30CrNiMo8): • 30 – Approx. 0.30% carbon content • Cr – Chromium for strength, wear resistance, and hardenability • Ni – Nickel for toughness and impact strength • Mo – Molybdenum for improved hardenability, fatigue strength, and resistance to softening • 8 – Indicates alloying content range as per EN standard Chemical Composition (% – typical limits): • Carbon (C): 0.26 – 0.34 • Manganese (Mn): 0.40 – 0.70 • Silicon (Si): ≤ 0.40 • Chromium (Cr): 1.80 – 2.20 • Nickel (Ni): 1.80 – 2.20 • Molybdenum (Mo): 0.30 – 0.50 • Phosphorus (P): ≤ 0.025 • Sulphur (S): ≤ 0.035 Mechanical Properties (Typical, quenched & tempered): • Tensile Strength: 900 – 1100 MPa • Yield Strength: ≥ 700 MPa • Elongation: ≥ 12% • Hardness: 260 – 320 HB (after heat treatment) Key Features: • Cr-Ni-Mo alloy steel with very high strength and toughness • Excellent hardenability for thick plates and large bar sections • Superior fatigue and impact resistance • Very good response to quenching and tempering • Suitable for highly stressed and safety-critical components Material Characteristics: EN 10083-3 30CrNiMo8 alloy steel in plate and bar form provides an exceptional combination of strength, toughness, and hardenability due to its high chromium, nickel, and molybdenum content. It achieves uniform mechanical properties across large sections, making it ideal for critical structural and dynamically loaded components. Applications: • Heavy-duty shafts, axles, and spindles • Gears, pinions, and drive components • High-strength plates for structural and fabricated parts • Automotive, defense, and aerospace components • Heavy engineering and power transmission equipment Conclusion: Ladhani Metal Corporation supplies high-quality EN 10083-3 30CrNiMo8 alloy steel plates and bars in various heat-treated and cut-to-size conditions with consistent quality and reliable performance. With very high strength, excellent toughness, and superior hardenability, 30CrNiMo8 steel is a dependable choice for the most demanding engineering and industrial applications. For size availability, technical specifications, or customized requirements, contact Ladhani Metal Corporation. #EN10083 #EN100833 #EN100833Steel #EN10083AlloySteel #EN10083EngineeringSteel #ENStandardSteel #AlloySteel #ChromiumSteel #34Cr4 #42Cr4 #50Cr4 #EngineeringSteelBars #AlloySteelBars #AlloySteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #ShaftSteel #GearSteel #AxleSteel #CrankshaftSteel #BoltSteel #MachinePartsSteel #HeatTreatableSteel #NormalizedSteel #AnnealedSteel #QuenchedTemperedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #AlloySteelSupplier #EN100833Supplier #EN100833Manufacturer #EN100833Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #InfrastructureSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Kochi #Trivandrum #Goa #Aurangabad #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Bhavnagar

EN 10083-3 39NiCrMo3 is a nickel-chromium-molybdenum alloy steel grade developed for applications requiring very high strength, excellent toughness, and superior fatigue resistance after heat treatment. With a nominal carbon content of around 0.39% and alloying elements such as nickel, chromium, and molybdenum, 39NiCrMo3 steel offers outstanding hardenability and mechanical performance, even in larger cross sections. Supplied in bar form, EN 10083-3 39NiCrMo3 alloy steel is widely used in heavy engineering, automotive, and power transmission applications. This grade is manufactured in accordance with EN 10083-3, which specifies technical delivery conditions for alloy steels for quenching and tempering. Ladhani Metal Corporation is a reliable manufacturer, supplier, and exporter of EN 10083-3 39NiCrMo3 alloy steel bars. Our materials are sourced from approved mills and supplied with controlled chemical composition, consistent mechanical properties, and precise dimensional accuracy as per EN 10083-3 requirements. Forms of Supply (as per grade): Hot rolled round bar, black round bar, forged bar, peeled bar, bright round bar, square bar, flat bar Explanation of Designation (39NiCrMo3): • 39 – Approx. 0.39% carbon content • Ni – Nickel for improved toughness and impact resistance • Cr – Chromium for increased strength and hardenability • Mo – Molybdenum for enhanced strength, creep resistance, and fatigue performance Chemical Composition (% – typical limits): • Carbon (C): 0.36 – 0.44 • Manganese (Mn): 0.50 – 0.80 • Silicon (Si): ≤ 0.40 • Nickel (Ni): 0.70 – 1.00 • Chromium (Cr): 0.60 – 0.90 • Molybdenum (Mo): 0.15 – 0.25 • Phosphorus (P): ≤ 0.025 • Sulphur (S): ≤ 0.035 Mechanical Properties (Typical, quenched & tempered): • Tensile Strength: 900 – 1100 MPa • Yield Strength: ≥ 700 MPa • Elongation: ≥ 11% • Hardness: 260 – 320 HB (after heat treatment) Key Features: • Ni-Cr-Mo alloy steel with excellent strength and toughness • Superior hardenability for large cross sections • Excellent fatigue and impact resistance • Very good response to quenching and tempering • Suitable for heavily loaded and safety-critical components Material Characteristics: EN 10083-3 39NiCrMo3 alloy steel bar provides an excellent balance of strength, toughness, and fatigue resistance due to its nickel, chromium, and molybdenum alloying. It responds extremely well to heat treatment, achieving high and uniform mechanical properties, making it ideal for critical engineering and automotive components. Applications: • Shafts, axles, and crankshafts • Gears, pinions, and drive components • High-strength bolts and fasteners • Forged and machined components • Heavy engineering, automotive, and power transmission parts Conclusion: Ladhani Metal Corporation supplies high-quality EN 10083-3 39NiCrMo3 alloy steel bars in various industrial bar forms with consistent quality and reliable performance. With very high strength, excellent toughness, and superior fatigue resistance, 39NiCrMo3 steel bars are a dependable choice for demanding engineering and mechanical applications. For size availability, technical specifications, or customized requirements, contact Ladhani Metal Corporation. #EN10083 #EN100833 #EN100833Steel #EN10083AlloySteel #EN10083EngineeringSteel #ENStandardSteel #AlloySteel #ChromiumSteel #34Cr4 #42Cr4 #50Cr4 #EngineeringSteelBars #AlloySteelBars #AlloySteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #ShaftSteel #GearSteel #AxleSteel #CrankshaftSteel #BoltSteel #MachinePartsSteel #HeatTreatableSteel #NormalizedSteel #AnnealedSteel #QuenchedTemperedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #AlloySteelSupplier #EN100833Supplier #EN100833Manufacturer #EN100833Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #InfrastructureSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Kochi #Trivandrum #Goa #Aurangabad #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Bhavnagar

EN 10083-3 35NiCr6 is a nickel-chromium alloy steel grade designed for applications requiring very high strength, excellent toughness, and good hardenability after heat treatment. With a nominal carbon content of around 0.35% and alloying elements such as nickel and chromium, 35NiCr6 steel offers superior mechanical performance, fatigue strength, and impact resistance compared to plain carbon steels. Supplied in plate and bar form, EN 10083-3 35NiCr6 alloy steel is widely used in heavy engineering, automotive, and power transmission applications. This grade is manufactured in accordance with EN 10083-3, which specifies technical delivery conditions for alloy steels for quenching and tempering. Ladhani Metal Corporation is a reliable manufacturer, supplier, and exporter of EN 10083-3 35NiCr6 alloy steel plates and bars. Our materials are sourced from approved mills and supplied with controlled chemical composition, consistent mechanical properties, and precise dimensional accuracy as per EN 10083-3 requirements. Forms of Supply (as per grade): Hot rolled plates, normalized plates, quenched and tempered plates, cut-to-size plates, hot rolled round bars, black round bars, forged bars, peeled bars, bright round bars, square bars, flat bars Explanation of Designation (35NiCr6): • 35 – Approx. 0.35% carbon content • Ni – Nickel for improved toughness and impact strength • Cr – Chromium for increased strength, wear resistance, and hardenability • 6 – Indicates alloying content range as per EN standard Chemical Composition (% – typical limits): • Carbon (C): 0.30 – 0.38 • Manganese (Mn): 0.50 – 0.80 • Silicon (Si): ≤ 0.40 • Nickel (Ni): 1.30 – 1.70 • Chromium (Cr): 0.60 – 0.90 • Phosphorus (P): ≤ 0.025 • Sulphur (S): ≤ 0.035 Mechanical Properties (Typical, quenched & tempered): • Tensile Strength: 900 – 1100 MPa • Yield Strength: ≥ 700 MPa • Elongation: ≥ 11% • Hardness: 260 – 320 HB (after heat treatment) Key Features: • Nickel-chromium alloy steel with excellent toughness • High strength and fatigue resistance after quenching and tempering • Good hardenability for thick plates and large bar sections • Excellent impact resistance at low temperatures • Suitable for heavily loaded and dynamically stressed components Material Characteristics: EN 10083-3 35NiCr6 alloy steel in plate and bar form provides an outstanding combination of strength, toughness, and hardenability due to its nickel and chromium content. It responds very well to heat treatment, achieving high and uniform mechanical properties even in thicker sections, making it ideal for critical load-bearing and fatigue-resistant applications. Applications: • Heavy-duty machine components • Gears, shafts, and drive components • Power transmission plates and bars • Automotive and defense components • Heavy engineering and industrial equipment Conclusion: Ladhani Metal Corporation supplies high-quality EN 10083-3 35NiCr6 alloy steel plates and bars in various heat-treated and cut-to-size conditions with consistent quality and reliable performance. With excellent toughness, high strength, and superior hardenability, 35NiCr6 steel is a dependable choice for demanding engineering and industrial applications. For size availability, technical specifications, or customized requirements, contact Ladhani Metal Corporation. #EN10083 #EN100833 #EN100833Steel #EN10083AlloySteel #EN10083EngineeringSteel #ENStandardSteel #AlloySteel #ChromiumSteel #34Cr4 #42Cr4 #50Cr4 #EngineeringSteelBars #AlloySteelBars #AlloySteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #ShaftSteel #GearSteel #AxleSteel #CrankshaftSteel #BoltSteel #MachinePartsSteel #HeatTreatableSteel #NormalizedSteel #AnnealedSteel #QuenchedTemperedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #AlloySteelSupplier #EN100833Supplier #EN100833Manufacturer #EN100833Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #InfrastructureSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Kochi #Trivandrum #Goa #Aurangabad #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Bhavnagar

EN 10083-3 38MnB5 is a boron-alloyed steel grade intended for applications requiring very high strength, excellent hardenability, and good toughness after heat treatment. With a nominal carbon content of around 0.38% and controlled additions of manganese and boron, 38MnB5 steel achieves superior hardenability and higher achievable strength compared to lower carbon boron steels. Supplied in bar form, EN 10083-3 38MnB5 alloy steel is widely used in automotive, forging, and heavy engineering applications where high load-bearing capacity is required. This grade is manufactured in accordance with EN 10083-3, which specifies technical delivery conditions for alloy steels for quenching and tempering. Ladhani Metal Corporation is a reliable manufacturer, supplier, and exporter of EN 10083-3 38MnB5 alloy steel bars. Our materials are sourced from approved mills and supplied with controlled chemical composition, consistent mechanical properties, and precise dimensional accuracy as per EN 10083-3 requirements. Forms of Supply (as per grade): Hot rolled round bar, black round bar, forged bar, peeled bar, bright round bar, square bar, flat bar, hot rolled plates, quenched and tempered plates Explanation of Designation (38MnB5): • 38 – Approx. 0.38% carbon content • Mn – Manganese alloying element for strength and hardenability • B – Boron addition for enhanced hardenability • 5 – Indicates alloying content range as per EN standard Chemical Composition (% – typical limits): • Carbon (C): 0.35 – 0.42 • Manganese (Mn): 1.10 – 1.40 • Silicon (Si): ≤ 0.40 • Boron (B): 0.0008 – 0.0050 • Chromium (Cr): ≤ 0.40 • Phosphorus (P): ≤ 0.025 • Sulphur (S): ≤ 0.035 Mechanical Properties (Typical, quenched & tempered): • Tensile Strength: 900 – 1100 MPa • Yield Strength: ≥ 700 MPa • Elongation: ≥ 10% • Hardness: 260 – 330 HB (after heat treatment) Key Features: • Boron alloy steel with very high hardenability • Very high strength and good toughness after quenching and tempering • Uniform mechanical properties across large bar and plate sections • Suitable for hot forging, induction hardening, and press hardening • Cost-effective alternative to higher alloy steels for heavy-duty parts Material Characteristics: EN 10083-3 38MnB5 alloy steel in bar and plate form offers an excellent balance of strength, toughness, and hardenability due to its higher carbon content and controlled boron addition. It responds extremely well to heat treatment, achieving high and uniform hardness even in thick sections, making it ideal for heavily stressed and safety-critical components. Applications: • Automotive structural and safety-critical components • Forged and press-hardened parts • Shafts, axles, and drive components • High-strength plates for fabricated assemblies • Heavy engineering and industrial machinery components Conclusion: Ladhani Metal Corporation supplies high-quality EN 10083-3 38MnB5 alloy steel bars and plates in relevant industrial forms with consistent quality and reliable performance. With excellent hardenability, very high strength after heat treatment, and proven performance in demanding automotive and forging applications, 38MnB5 alloy steel is a dependable choice for high-load engineering requirements. For size availability, technical specifications, or customized requirements, contact Ladhani Metal Corporation. #EN10083 #EN100833 #EN100833Steel #EN10083AlloySteel #EN10083EngineeringSteel #ENStandardSteel #AlloySteel #ChromiumSteel #34Cr4 #42Cr4 #50Cr4 #EngineeringSteelBars #AlloySteelBars #AlloySteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #ShaftSteel #GearSteel #AxleSteel #CrankshaftSteel #BoltSteel #MachinePartsSteel #HeatTreatableSteel #NormalizedSteel #AnnealedSteel #QuenchedTemperedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #AlloySteelSupplier #EN100833Supplier #EN100833Manufacturer #EN100833Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #InfrastructureSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Kochi #Trivandrum #Goa #Aurangabad #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Bhavnagar

EN 10083-3 30MnB5 is a boron-alloyed steel grade developed for applications requiring high strength, excellent hardenability, and good toughness after heat treatment. With a nominal carbon content of around 0.30% and the controlled addition of boron and manganese, 30MnB5 steel provides significantly improved hardenability compared to conventional carbon steels, allowing uniform mechanical properties even in thicker sections. Supplied in bar form, EN 10083-3 30MnB5 alloy steel is widely used in automotive, forging, and heavy engineering applications. This grade is manufactured in accordance with EN 10083-3, which specifies technical delivery conditions for alloy steels for quenching and tempering. Ladhani Metal Corporation is a reliable manufacturer, supplier, and exporter of EN 10083-3 30MnB5 alloy steel bars. Our materials are sourced from approved mills and supplied with controlled chemical composition, consistent mechanical properties, and precise dimensional accuracy as per EN 10083-3 requirements. Forms of Supply (as per grade): Hot rolled round bar, black round bar, forged bar, peeled bar, bright round bar, square bar, flat bar, hot rolled plates, quenched and tempered plates Explanation of Designation (30MnB5): • 30 – Approx. 0.30% carbon content • Mn – Manganese alloying element for strength and hardenability • B – Boron addition for enhanced hardenability • 5 – Indicates alloying content range as per EN standard Chemical Composition (% – typical limits): • Carbon (C): 0.27 – 0.33 • Manganese (Mn): 1.10 – 1.40 • Silicon (Si): ≤ 0.40 • Boron (B): 0.0008 – 0.0050 • Chromium (Cr): ≤ 0.40 • Phosphorus (P): ≤ 0.025 • Sulphur (S): ≤ 0.035 Mechanical Properties (Typical, quenched & tempered): • Tensile Strength: 850 – 1050 MPa • Yield Strength: ≥ 650 MPa • Elongation: ≥ 11% • Hardness: 250 – 320 HB (after heat treatment) Key Features: • Boron alloy steel with excellent hardenability • High strength and good toughness after quenching and tempering • Uniform mechanical properties in bars and plates • Suitable for hot forging and press hardening applications • Cost-effective alternative to higher alloy steels Material Characteristics: EN 10083-3 30MnB5 alloy steel in bar and plate form offers a strong combination of strength, toughness, and hardenability due to controlled boron addition and manganese content. It responds very well to heat treatment, achieving high and uniform hardness even in thicker sections, making it suitable for safety-critical and heavily loaded components. Applications: • Automotive structural and safety components • Forged and press-hardened parts • Shafts, axles, and suspension components • High-strength plates for fabricated assemblies • Heavy engineering and industrial machinery parts Conclusion: Ladhani Metal Corporation supplies high-quality EN 10083-3 30MnB5 alloy steel bars and plates in relevant industrial forms with consistent quality and reliable performance. With excellent hardenability, high strength after heat treatment, and proven performance in automotive and forging applications, 30MnB5 alloy steel is a dependable choice for demanding engineering requirements. For size availability, technical specifications, or customized requirements, contact Ladhani Metal Corporation. #EN10083 #EN100833 #EN100833Steel #EN10083AlloySteel #EN10083EngineeringSteel #ENStandardSteel #AlloySteel #ChromiumSteel #34Cr4 #42Cr4 #50Cr4 #EngineeringSteelBars #AlloySteelBars #AlloySteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #ShaftSteel #GearSteel #AxleSteel #CrankshaftSteel #BoltSteel #MachinePartsSteel #HeatTreatableSteel #NormalizedSteel #AnnealedSteel #QuenchedTemperedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #AlloySteelSupplier #EN100833Supplier #EN100833Manufacturer #EN100833Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #InfrastructureSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Kochi #Trivandrum #Goa #Aurangabad #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Bhavnagar

EN 10083-3 20MnB5 is a boron-alloyed steel grade designed for applications requiring high strength, excellent hardenability, and good toughness after heat treatment. With a nominal carbon content of around 0.20% and the addition of boron, manganese, and chromium, 20MnB5 steel achieves significantly improved hardenability compared to conventional carbon steels. Supplied in bar and plate form, EN 10083-3 20MnB5 alloy steel is widely used in automotive, forging, and mechanical engineering applications. This grade is manufactured in accordance with EN 10083-3, which specifies technical delivery conditions for quenched and tempered alloy steels. Ladhani Metal Corporation is a reliable manufacturer, supplier, and exporter of EN 10083-3 20MnB5 alloy steel bars and plates. Our materials are sourced from approved mills and supplied with controlled chemical composition, consistent mechanical properties, and precise dimensional accuracy as per EN 10083-3 requirements. Forms of Supply (as per grade): Hot rolled round bar, black round bar, forged bar, peeled bar, bright round bar, square bar, flat bar, hot rolled plates, quenched and tempered plates Explanation of Designation (20MnB5): • 20 – Approx. 0.20% carbon content • Mn – Manganese alloying element for strength and hardenability • B – Boron addition for enhanced hardenability • 5 – Indicates alloying content range as per EN standard Chemical Composition (% – typical limits): • Carbon (C): 0.17 – 0.23 • Manganese (Mn): 1.10 – 1.40 • Silicon (Si): ≤ 0.40 • Boron (B): 0.0008 – 0.0050 • Chromium (Cr): ≤ 0.40 • Phosphorus (P): ≤ 0.025 • Sulphur (S): ≤ 0.035 Mechanical Properties (Typical, quenched & tempered): • Tensile Strength: 800 – 1000 MPa • Yield Strength: ≥ 600 MPa • Elongation: ≥ 12% • Hardness: 230 – 300 HB (after heat treatment) Key Features: • Boron alloy steel with excellent hardenability • High strength and good toughness after quenching and tempering • Uniform mechanical properties across bars and plates • Suitable for hot forging and press hardening • Cost-effective alternative to higher alloy steels Material Characteristics: EN 10083-3 20MnB5 alloy steel in bar and plate form offers a strong combination of strength, toughness, and hardenability due to its boron addition and controlled alloy content. It responds very well to heat treatment, enabling high and uniform hardness even in thicker sections, making it ideal for safety-critical and load-bearing components. Applications: • Automotive structural and safety components • Forged parts and press-hardened components • Shafts, axles, and suspension parts • High-strength plates for fabricated components • Heavy engineering and industrial applications Conclusion: Ladhani Metal Corporation supplies high-quality EN 10083-3 20MnB5 alloy steel bars and plates in relevant industrial forms with consistent quality and reliable performance. With excellent hardenability, high strength after heat treatment, and proven performance in automotive and forging applications, 20MnB5 alloy steel is a dependable choice for demanding engineering requirements. For size availability, technical specifications, or customized requirements, contact Ladhani Metal Corporation. #EN10083 #EN100833 #EN100833Steel #EN10083AlloySteel #EN10083EngineeringSteel #ENStandardSteel #AlloySteel #ChromiumSteel #34Cr4 #42Cr4 #50Cr4 #EngineeringSteelBars #AlloySteelBars #AlloySteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #ShaftSteel #GearSteel #AxleSteel #CrankshaftSteel #BoltSteel #MachinePartsSteel #HeatTreatableSteel #NormalizedSteel #AnnealedSteel #QuenchedTemperedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #AlloySteelSupplier #EN100833Supplier #EN100833Manufacturer #EN100833Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #InfrastructureSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Kochi #Trivandrum #Goa #Aurangabad #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Bhavnagar