Products

EN 10083-3 41CrS4 is a resulphurized chromium alloy steel grade developed for applications requiring high strength, improved hardenability, and excellent machinability. The controlled addition of sulphur (S) enhances cutting performance and chip formation, making this grade particularly suitable for high-speed machining and large-scale production of precision components. With a nominal carbon content of approximately 0.41% and chromium as the primary alloying element, 41CrS4 steel delivers higher strength and hardness compared to lower carbon chromium grades, while maintaining good toughness after quenching and tempering. The material is manufactured in accordance with EN 10083-3, which specifies technical delivery conditions for alloy steels for quenching and tempering. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10083-3 41CrS4 alloy steel bars, supplied with certified mill test certificates and strict quality control to meet industrial standards. Forms of Supply (as per grade): Hot rolled round bars, black round bars, forged bars, peeled bars, bright round bars, square bars, flat bars Explanation of Designation (41CrS4): • 41 – Approx. 0.41% carbon content • Cr – Chromium for improved strength and hardenability • S – Resulphurized for enhanced machinability • 4 – Indicates chromium content range as per EN standard Chemical Composition (% – typical limits): • Carbon (C): 0.38 – 0.45 • Manganese (Mn): 0.60 – 0.90 • Silicon (Si): ≤ 0.40 • Chromium (Cr): 0.90 – 1.20 • Sulphur (S): 0.020 – 0.040 • Phosphorus (P): ≤ 0.025 Mechanical Properties (Typical, quenched & tempered condition): • Tensile Strength: 900 – 1100 MPa • Yield Strength: ≥ 700 MPa • Elongation: ≥ 9 – 11% • Hardness: 260 – 320 HB (depending on heat treatment) Key Features: • Resulphurized chromium alloy steel with superior machinability • Higher strength due to increased carbon content • Good hardenability and wear resistance • Suitable for quenching and tempering • Reliable performance in dynamic and torsional load conditions Material Characteristics: EN 10083-3 41CrS4 alloy steel bar combines high strength with improved machinability. The sulphur addition enhances tool life and cutting efficiency, while chromium improves hardenability and wear resistance. It is well-suited for precision machined components requiring strength and production efficiency. Applications: • High-strength machined shafts and spindles • Automotive transmission components • Gear blanks and drive parts • Bolts, studs, and fasteners • Mass-produced precision engineering components Conclusion: Ladhani Metal Corporation supplies premium quality EN 10083-3 41CrS4 alloy steel bars in various sizes and finishes to meet demanding industrial and machining requirements. With enhanced machinability and strong mechanical properties, 41CrS4 steel bars are ideal for high-volume and precision engineering applications. For size availability, technical specifications, or customized supply requirements, contact Ladhani Metal Corporation. #EN10083 #EN100833 #EN100833Steel #EN10083AlloySteel #EN10083EngineeringSteel #ENStandardSteel #AlloySteel #ChromiumSteel #34Cr4 #42Cr4 #50Cr4 #EngineeringSteelBars #AlloySteelBars #AlloySteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #ShaftSteel #GearSteel #AxleSteel #CrankshaftSteel #BoltSteel #MachinePartsSteel #HeatTreatableSteel #NormalizedSteel #AnnealedSteel #QuenchedTemperedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #AlloySteelSupplier #EN100833Supplier #EN100833Manufacturer #EN100833Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #InfrastructureSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Kochi #Trivandrum #Goa #Aurangabad #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Bhavnagar

EN 10083-3 37CrS4 is a resulphurized chromium alloy steel grade designed for applications requiring good strength, improved hardenability, and enhanced machinability. The addition of sulphur (S) improves cutting performance, making this grade particularly suitable for high-speed machining and large-scale production of precision components. With a nominal carbon content of approximately 0.37% and chromium as the primary alloying element, 37CrS4 steel provides a reliable balance of strength, wear resistance, and machinability after quenching and tempering. The material is manufactured in accordance with EN 10083-3, which specifies technical delivery conditions for alloy steels for quenching and tempering. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10083-3 37CrS4 alloy steel bars, supplied with certified mill test certificates and strict quality control. Forms of Supply (as per grade): Hot rolled round bars, black round bars, forged bars, peeled bars, bright round bars, square bars, flat bars Explanation of Designation (37CrS4): • 37 – Approx. 0.37% carbon content • Cr – Chromium for improved strength and hardenability • S – Resulphurized for enhanced machinability • 4 – Indicates chromium content range as per EN standard Chemical Composition (% – typical limits): • Carbon (C): 0.34 – 0.41 • Manganese (Mn): 0.60 – 0.90 • Silicon (Si): ≤ 0.40 • Chromium (Cr): 0.90 – 1.20 • Sulphur (S): 0.020 – 0.040 • Phosphorus (P): ≤ 0.025 Mechanical Properties (Typical, quenched & tempered condition): • Tensile Strength: 850 – 1050 MPa • Yield Strength: ≥ 650 MPa • Elongation: ≥ 9 – 11% • Hardness: 250 – 320 HB (depending on heat treatment) Key Features: • Resulphurized chromium alloy steel with improved machinability • Good strength and wear resistance after heat treatment • Better cutting performance for automatic machining • Suitable for medium to high-strength applications • Reliable hardenability compared to plain carbon steels Material Characteristics: EN 10083-3 37CrS4 alloy steel bar offers a strong combination of strength and machinability. The sulphur addition enhances chip formation and tool life during machining, while chromium improves hardenability and wear resistance. It is suitable for precision components requiring both mechanical strength and efficient production. Applications: • Machined shafts and spindles • Automotive transmission components • Gear blanks and mechanical parts • High-strength fasteners • Mass-produced engineering components Conclusion: Ladhani Metal Corporation supplies premium quality EN 10083-3 37CrS4 alloy steel bars in various sizes and finishes to meet industrial and machining requirements. With enhanced machinability and reliable mechanical properties, 37CrS4 steel bars are ideal for precision and high-volume engineering applications. For size availability, technical specifications, or customized supply requirements, contact Ladhani Metal Corporation.

EN 10083-3 34CrS4 is a resulphurized chromium alloy steel grade developed for applications requiring good strength, improved machinability, and reliable hardenability after heat treatment. The addition of sulphur (S) enhances machinability, making this grade particularly suitable for high-speed machining and mass production of components. With a nominal carbon content of approximately 0.34% and chromium as the primary alloying element, 34CrS4 steel provides a good balance of strength, toughness, and wear resistance after quenching and tempering. This material is manufactured in accordance with EN 10083-3, which specifies technical delivery conditions for alloy steels for quenching and tempering. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10083-3 34CrS4 alloy steel bars, supplied with certified mill test certificates and strict quality control. Forms of Supply (as per grade): Hot rolled round bars, black round bars, forged bars, peeled bars, bright round bars, square bars, flat bars Explanation of Designation (34CrS4): • 34 – Approx. 0.34% carbon content • Cr – Chromium for improved strength and hardenability • S – Resulphurized for enhanced machinability • 4 – Indicates chromium content range as per EN standard Chemical Composition (% – typical limits): • Carbon (C): 0.30 – 0.37 • Manganese (Mn): 0.60 – 0.90 • Silicon (Si): ≤ 0.40 • Chromium (Cr): 0.90 – 1.20 • Sulphur (S): 0.020 – 0.040 (improved machinability range) • Phosphorus (P): ≤ 0.025 Mechanical Properties (Typical, quenched & tempered condition): • Tensile Strength: 800 – 1000 MPa • Yield Strength: ≥ 600 MPa • Elongation: ≥ 10% • Hardness: 230 – 300 HB (depending on heat treatment) Key Features: • Resulphurized chromium alloy steel with enhanced machinability • Good strength and wear resistance after heat treatment • Improved cutting performance in automatic machining • Suitable for mass production components • Reliable hardenability compared to plain carbon steels Material Characteristics: EN 10083-3 34CrS4 alloy steel bar offers improved machinability due to sulphur addition while maintaining good mechanical strength and hardenability. It is ideal for components requiring precision machining along with adequate strength and wear resistance. Applications: • Machined shafts and spindles • Automotive components • Transmission and gear parts • Bolts, studs, and fasteners • High-volume precision machined parts Conclusion: Ladhani Metal Corporation supplies premium quality EN 10083-3 34CrS4 alloy steel bars in various sizes and finishes to meet industrial machining requirements. With enhanced machinability and reliable mechanical properties, 34CrS4 steel bars are an excellent choice for high-speed machining and engineering applications. For size availability, technical specifications, or customized supply requirements, contact Ladhani Metal Corporation. #EN10083 #EN100833 #EN100833Steel #EN10083AlloySteel #EN10083EngineeringSteel #ENStandardSteel #AlloySteel #ChromiumSteel #34Cr4 #42Cr4 #50Cr4 #EngineeringSteelBars #AlloySteelBars #AlloySteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #ShaftSteel #GearSteel #AxleSteel #CrankshaftSteel #BoltSteel #MachinePartsSteel #HeatTreatableSteel #NormalizedSteel #AnnealedSteel #QuenchedTemperedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #AlloySteelSupplier #EN100833Supplier #EN100833Manufacturer #EN100833Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #InfrastructureSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Kochi #Trivandrum #Goa #Aurangabad #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Bhavnagar

EN 10083-3 41Cr4 is a chromium alloy steel grade designed for applications requiring high strength, good toughness, and improved hardenability after heat treatment. With a nominal carbon content of approximately 0.41% and chromium as the primary alloying element, 41Cr4 steel delivers enhanced mechanical performance and wear resistance compared to lower carbon alloy steels. 41Cr4 alloy steel bars are widely used in components subjected to high torsional stress, bending loads, and dynamic forces. The material is manufactured in accordance with EN 10083-3, which specifies technical delivery conditions for alloy steels for quenching and tempering. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10083-3 41Cr4 alloy steel bars, supplied with certified mill test certificates and strict quality assurance to meet industrial standards. Forms of Supply (as per grade): Hot rolled round bars, black round bars, forged bars, peeled bars, bright round bars, square bars, flat bars Explanation of Designation (41Cr4): • 41 – Approx. 0.41% carbon content • Cr – Chromium for improved strength, hardenability, and wear resistance • 4 – Indicates chromium content range as per EN standard Chemical Composition (% – typical limits): • Carbon (C): 0.38 – 0.45 • Manganese (Mn): 0.60 – 0.90 • Silicon (Si): ≤ 0.40 • Chromium (Cr): 0.90 – 1.20 • Phosphorus (P): ≤ 0.025 • Sulphur (S): ≤ 0.035 Mechanical Properties (Typical, quenched & tempered condition): • Tensile Strength: 900 – 1100 MPa • Yield Strength: ≥ 700 MPa • Elongation: ≥ 10% • Hardness: 260 – 320 HB (depending on heat treatment) Key Features: • Chromium alloy steel with higher carbon content for improved strength • Good hardenability and wear resistance • Suitable for quenching and tempering • Good fatigue resistance under dynamic loading • Reliable mechanical performance in heat-treated condition Material Characteristics: EN 10083-3 41Cr4 alloy steel bar provides a strong combination of strength, toughness, and abrasion resistance. The higher carbon content allows for greater hardness after heat treatment, while chromium enhances depth of hardening and wear resistance. Applications: • Shafts, spindles, and axles • Gears and pinions • High-strength bolts and fasteners • Automotive transmission components • Heat-treated engineering parts Conclusion: Ladhani Metal Corporation supplies premium quality EN 10083-3 41Cr4 alloy steel bars in various sizes and finishes to meet demanding engineering requirements. With high strength, good hardenability, and reliable wear resistance, 41Cr4 steel bars are suitable for a wide range of industrial and mechanical applications. For size availability, technical specifications, or customized supply requirements, contact Ladhani Metal Corporation. #EN10083 #EN100833 #EN100833Steel #EN10083AlloySteel #EN10083EngineeringSteel #ENStandardSteel #AlloySteel #ChromiumSteel #34Cr4 #42Cr4 #50Cr4 #EngineeringSteelBars #AlloySteelBars #AlloySteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #ShaftSteel #GearSteel #AxleSteel #CrankshaftSteel #BoltSteel #MachinePartsSteel #HeatTreatableSteel #NormalizedSteel #AnnealedSteel #QuenchedTemperedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #AlloySteelSupplier #EN100833Supplier #EN100833Manufacturer #EN100833Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #InfrastructureSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Kochi #Trivandrum #Goa #Aurangabad #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Bhavnagar

EN 10083-3 37Cr4 is a chromium alloy steel grade designed for applications requiring good strength, enhanced hardenability, and reliable wear resistance after heat treatment. With a nominal carbon content of approximately 0.37% and chromium as the primary alloying element, 37Cr4 steel provides improved mechanical properties compared to non-alloy carbon steels. 37Cr4 alloy steel bars are widely used in engineering components subjected to torsion, bending, and moderate to high dynamic loads. The material is manufactured in accordance with EN 10083-3, which specifies technical delivery conditions for alloy steels for quenching and tempering. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10083-3 37Cr4 alloy steel bars, supplied with certified mill test certificates and strict quality control to meet international standards. Forms of Supply (as per grade): Hot rolled round bars, black round bars, forged bars, peeled bars, bright round bars, square bars, flat bars Explanation of Designation (37Cr4): • 37 – Approx. 0.37% carbon content • Cr – Chromium for improved strength, wear resistance, and hardenability • 4 – Indicates chromium content range as per EN standard Chemical Composition (% – typical limits): • Carbon (C): 0.34 – 0.41 • Manganese (Mn): 0.60 – 0.90 • Silicon (Si): ≤ 0.40 • Chromium (Cr): 0.90 – 1.20 • Phosphorus (P): ≤ 0.025 • Sulphur (S): ≤ 0.035 Mechanical Properties (Typical, quenched & tempered condition): • Tensile Strength: 850 – 1050 MPa • Yield Strength: ≥ 650 MPa • Elongation: ≥ 11% • Hardness: 250 – 320 HB (depending on heat treatment) Key Features: • Chromium alloy steel with good strength and toughness • Improved hardenability over plain carbon steels • Good wear and fatigue resistance • Suitable for quenching and tempering applications • Reliable performance under dynamic loading Material Characteristics: EN 10083-3 37Cr4 alloy steel bar offers a strong balance between strength and toughness. The chromium addition enhances hardenability, allowing uniform mechanical properties in medium-sized sections after heat treatment. It is suitable for components that require both surface hardness and core toughness. Applications: • Shafts and axles • Gears and transmission components • Automotive and machinery parts • Bolts, studs, and fasteners • General engineering and heat-treated mechanical components Conclusion: Ladhani Metal Corporation supplies premium quality EN 10083-3 37Cr4 alloy steel bars in various sizes and finishes to meet demanding industrial requirements. With reliable strength, good wear resistance, and excellent heat treatment response, 37Cr4 steel bars are suitable for a wide range of engineering and mechanical applications. For size availability, technical specifications, or customized supply requirements, contact Ladhani Metal Corporation. #EN10083 #EN100833 #EN100833Steel #EN10083AlloySteel #EN10083EngineeringSteel #ENStandardSteel #AlloySteel #ChromiumSteel #34Cr4 #42Cr4 #50Cr4 #EngineeringSteelBars #AlloySteelBars #AlloySteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #ShaftSteel #GearSteel #AxleSteel #CrankshaftSteel #BoltSteel #MachinePartsSteel #HeatTreatableSteel #NormalizedSteel #AnnealedSteel #QuenchedTemperedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #AlloySteelSupplier #EN100833Supplier #EN100833Manufacturer #EN100833Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #InfrastructureSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Kochi #Trivandrum #Goa #Aurangabad #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Bhavnagar

EN 10083-3 34Cr4 is a chromium alloy steel grade developed for applications requiring good strength, improved hardenability, and enhanced wear resistance after heat treatment. With a nominal carbon content of approximately 0.34% and chromium as the principal alloying element, 34Cr4 steel offers a reliable balance of toughness and mechanical strength. 34Cr4 alloy steel plates are widely used in structural and mechanical components subjected to moderate to high stress conditions. The material is manufactured in accordance with EN 10083-3, which specifies technical delivery conditions for alloy steels for quenching and tempering. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10083-3 34Cr4 alloy steel plates, supplied with certified chemical composition and controlled mechanical properties as per EN standards. Forms of Supply (as per grade): Hot rolled plates, normalized plates, annealed plates, quenched and tempered plates, flame cut plates, cut-to-size plates Explanation of Designation (34Cr4): • 34 – Approx. 0.34% carbon content • Cr – Chromium for improved strength, wear resistance, and hardenability • 4 – Indicates chromium content range as per EN standard Chemical Composition (% – typical limits): • Carbon (C): 0.30 – 0.37 • Manganese (Mn): 0.60 – 0.90 • Silicon (Si): ≤ 0.40 • Chromium (Cr): 0.90 – 1.20 • Phosphorus (P): ≤ 0.025 • Sulphur (S): ≤ 0.035 Mechanical Properties (Typical, quenched & tempered condition): • Tensile Strength: 800 – 1000 MPa • Yield Strength: ≥ 600 MPa • Elongation: ≥ 12% • Hardness: 230 – 300 HB (depending on heat treatment) Key Features: • Chromium alloy steel with good strength and toughness • Improved hardenability compared to carbon steels • Good wear and fatigue resistance • Suitable for quenching and tempering • Reliable mechanical performance in structural applications Material Characteristics: EN 10083-3 34Cr4 alloy steel plate provides a dependable combination of strength, toughness, and wear resistance. The chromium content enhances hardenability and allows the material to achieve improved mechanical properties after heat treatment, making it suitable for load-bearing components. Applications: • Structural and fabricated engineering parts • Shafts and mechanical components • Automotive and heavy machinery parts • Heat-treated plates for high-strength applications • General engineering and industrial uses Conclusion: Ladhani Metal Corporation supplies high-quality EN 10083-3 34Cr4 alloy steel plates in various thicknesses and heat-treated conditions. With good strength, enhanced hardenability, and reliable performance, 34Cr4 steel plates are suitable for a wide range of engineering and industrial applications. For size availability, technical specifications, or customized requirements, contact Ladhani Metal Corporation. #EN10083 #EN100833 #EN100833Steel #EN10083AlloySteel #EN10083EngineeringSteel #ENStandardSteel #AlloySteel #ChromiumSteel #34Cr4 #42Cr4 #50Cr4 #EngineeringSteelBars #AlloySteelBars #AlloySteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #ShaftSteel #GearSteel #AxleSteel #CrankshaftSteel #BoltSteel #MachinePartsSteel #HeatTreatableSteel #NormalizedSteel #AnnealedSteel #QuenchedTemperedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #AlloySteelSupplier #EN100833Supplier #EN100833Manufacturer #EN100833Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #InfrastructureSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Kochi #Trivandrum #Goa #Aurangabad #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Bhavnagar

EN 10083-3 46Cr2 is a chromium alloy steel grade developed for applications requiring high strength, improved wear resistance, and good hardenability after heat treatment. With a nominal carbon content of approximately 0.46%, this grade provides higher strength and hardness compared to lower carbon chromium steels. The addition of chromium enhances hardenability, surface hardness, and resistance to abrasion. 46Cr2 alloy steel bars are widely used in components subjected to high mechanical loads, torsion, and wear conditions. The material is manufactured in accordance with EN 10083-3, which specifies technical delivery conditions for alloy steels for quenching and tempering. Ladhani Metal Corporation is a reliable manufacturer, supplier, and exporter of EN 10083-3 46Cr2 alloy steel bars, supplied with certified mill test certificates and strict quality control. Forms of Supply (as per grade): Hot rolled round bars, black round bars, forged bars, peeled bars, bright round bars, square bars, flat bars Explanation of Designation (46Cr2): • 46 – Approx. 0.46% carbon content • Cr – Chromium for improved strength, wear resistance, and hardenability • 2 – Indicates chromium content range as per EN standard Chemical Composition (% – typical limits): • Carbon (C): 0.43 – 0.50 • Manganese (Mn): 0.60 – 0.90 • Silicon (Si): ≤ 0.40 • Chromium (Cr): 0.40 – 0.70 • Phosphorus (P): ≤ 0.025 • Sulphur (S): ≤ 0.035 Mechanical Properties (Typical, quenched & tempered condition): • Tensile Strength: 850 – 1050 MPa • Yield Strength: ≥ 650 MPa • Elongation: ≥ 10% • Hardness: 250 – 320 HB (depending on heat treatment) Key Features: • Higher carbon chromium steel with improved hardness • Good hardenability and wear resistance • Suitable for surface hardening applications • Good fatigue resistance under dynamic loading • Reliable performance in heat-treated condition Material Characteristics: EN 10083-3 46Cr2 alloy steel bars offer a strong combination of strength and abrasion resistance. The higher carbon content allows the material to achieve greater hardness after heat treatment, while chromium enhances hardenability and durability. Applications: • Shafts and axles • Gears and pinions • High-strength mechanical components • Automotive transmission parts • Wear-resistant engineering components Conclusion: Ladhani Metal Corporation supplies premium quality EN 10083-3 46Cr2 alloy steel bars in various sizes and finishes to meet industrial and engineering requirements. With high strength, good wear resistance, and reliable heat treatment response, 46Cr2 steel bars are suitable for demanding mechanical applications. For size availability, technical specifications, or customized supply requirements, contact Ladhani Metal Corporation. #EN10083 #EN100833 #EN100833Steel #EN10083AlloySteel #EN10083EngineeringSteel #ENStandardSteel #AlloySteel #ChromiumSteel #34Cr4 #42Cr4 #50Cr4 #EngineeringSteelBars #AlloySteelBars #AlloySteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #ShaftSteel #GearSteel #AxleSteel #CrankshaftSteel #BoltSteel #MachinePartsSteel #HeatTreatableSteel #NormalizedSteel #AnnealedSteel #QuenchedTemperedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #AlloySteelSupplier #EN100833Supplier #EN100833Manufacturer #EN100833Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #InfrastructureSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Kochi #Trivandrum #Goa #Aurangabad #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Bhavnagar

EN 10083-3 38Cr2 is a chromium alloy steel grade designed for applications requiring high strength, good wear resistance, and excellent hardenability after heat treatment. With a nominal carbon content of approximately 0.38% and chromium as the primary alloying element, 38Cr2 steel offers improved strength and abrasion resistance compared to plain carbon steels. 38Cr2 alloy steel plates are commonly used in engineering components subjected to mechanical stress, impact loading, and surface wear. The material is manufactured in accordance with EN 10083-3, which specifies technical delivery conditions for alloy steels for quenching and tempering. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10083-3 38Cr2 alloy steel plates, supplied with certified chemical composition and controlled mechanical properties as per international standards. Forms of Supply (as per grade): Hot rolled plates, normalized plates, annealed plates, quenched and tempered plates, flame cut plates, cut-to-size plates Explanation of Designation (38Cr2): • 38 – Approx. 0.38% carbon content • Cr – Chromium for enhanced strength, wear resistance, and hardenability • 2 – Indicates chromium content range as per EN standard Chemical Composition (% – typical limits): • Carbon (C): 0.35 – 0.42 • Manganese (Mn): 0.60 – 0.90 • Silicon (Si): ≤ 0.40 • Chromium (Cr): 0.40 – 0.70 • Phosphorus (P): ≤ 0.025 • Sulphur (S): ≤ 0.035 Mechanical Properties (Typical, quenched & tempered condition): • Tensile Strength: 800 – 1000 MPa • Yield Strength: ≥ 600 MPa • Elongation: ≥ 12% • Hardness: 240 – 300 HB (depending on heat treatment) Key Features: • Chromium alloy steel with good strength and wear resistance • Improved hardenability compared to carbon steels • Good fatigue resistance • Suitable for heat treatment to achieve high surface hardness • Reliable performance under mechanical stress Material Characteristics: EN 10083-3 38Cr2 alloy steel plate provides a good balance of strength, toughness, and abrasion resistance. The presence of chromium enhances hardenability and wear resistance, making it suitable for components that require surface durability and structural integrity. Applications: • Machinery components • Wear-resistant plates and structural parts • Shafts and mechanical elements • Automotive and heavy engineering components • Fabricated and heat-treated parts Conclusion: Ladhani Metal Corporation supplies high-quality EN 10083-3 38Cr2 alloy steel plates in various thicknesses and heat-treated conditions. With good strength, improved wear resistance, and reliable hardenability, 38Cr2 steel is suitable for a wide range of engineering and industrial applications. For size availability, technical specifications, or customized requirements, contact Ladhani Metal Corporation. #EN10083 #EN100833 #EN100833Steel #EN10083AlloySteel #EN10083EngineeringSteel #ENStandardSteel #AlloySteel #ChromiumSteel #34Cr4 #42Cr4 #50Cr4 #EngineeringSteelBars #AlloySteelBars #AlloySteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #ShaftSteel #GearSteel #AxleSteel #CrankshaftSteel #BoltSteel #MachinePartsSteel #HeatTreatableSteel #NormalizedSteel #AnnealedSteel #QuenchedTemperedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #AlloySteelSupplier #EN100833Supplier #EN100833Manufacturer #EN100833Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #InfrastructureSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Kochi #Trivandrum #Goa #Aurangabad #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Bhavnagar

EN 10083-3 30NiCrMo16-6 is a high-strength nickel-chromium-molybdenum alloy steel grade developed for applications requiring exceptional toughness, very high hardenability, and superior fatigue resistance after quenching and tempering. With a nominal carbon content of approximately 0.30% and higher nickel content compared to standard Cr-Ni-Mo grades, this steel offers outstanding impact strength and uniform mechanical properties even in heavy sections. 30NiCrMo16-6 is widely used in critical engineering, defense, heavy machinery, and power transmission components where reliability under extreme loading conditions is essential. The material is produced in accordance with EN 10083-3, which specifies technical delivery conditions for alloy steels for quenching and tempering. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10083-3 30NiCrMo16-6 alloy steel plates and bars, supplied with certified mill test certificates and strict quality control. Forms of Supply (as per grade): Hot rolled plates, normalized plates, quenched and tempered plates, flame cut plates, cut-to-size plates, hot rolled round bars, black round bars, forged bars, peeled bars, bright round bars, square bars, flat bars Explanation of Designation (30NiCrMo16-6): • 30 – Approx. 0.30% carbon content • Ni – Nickel for superior toughness and impact resistance • Cr – Chromium for strength and hardenability • Mo – Molybdenum for improved fatigue resistance and tempering stability • 16-6 – Indicates alloying content range as per EN standard (higher nickel content category) Chemical Composition (% – typical limits): • Carbon (C): 0.26 – 0.34 • Manganese (Mn): 0.40 – 0.70 • Silicon (Si): ≤ 0.40 • Nickel (Ni): 3.50 – 4.00 • Chromium (Cr): 1.30 – 1.70 • Molybdenum (Mo): 0.30 – 0.50 • Phosphorus (P): ≤ 0.025 • Sulphur (S): ≤ 0.035 Mechanical Properties (Typical, quenched & tempered condition): • Tensile Strength: 1000 – 1200 MPa (depending on section size and heat treatment) • Yield Strength: ≥ 850 MPa • Elongation: ≥ 11% • Hardness: 300 – 360 HB • Excellent impact strength even at low temperatures Key Features: • High Ni-Cr-Mo alloy steel with exceptional toughness • Excellent hardenability for thick plates and large diameter bars • Superior fatigue and impact resistance • Good resistance to temper brittleness • Suitable for highly stressed and safety-critical components Material Characteristics: EN 10083-3 30NiCrMo16-6 alloy steel in plate and bar form provides outstanding mechanical performance in heavy sections due to its high nickel content. It ensures deep hardening capability and uniform strength distribution after heat treatment, making it ideal for critical load-bearing applications. Applications: • Heavy-duty shafts and axles • High-strength gears and transmission components • Defense and aerospace structural parts • Large forged components • Power generation and heavy machinery equipment Conclusion: Ladhani Metal Corporation supplies premium quality EN 10083-3 30NiCrMo16-6 alloy steel plates and bars in various sizes, finishes, and heat-treated conditions. With its exceptional toughness, high strength, and superior hardenability, this grade is a reliable choice for demanding industrial and engineering applications. For size availability, technical specifications, or customized requirements, contact Ladhani Metal Corporation. #EN10083 #EN100833 #EN100833Steel #EN10083AlloySteel #EN10083EngineeringSteel #ENStandardSteel #AlloySteel #ChromiumSteel #34Cr4 #42Cr4 #50Cr4 #EngineeringSteelBars #AlloySteelBars #AlloySteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #ShaftSteel #GearSteel #AxleSteel #CrankshaftSteel #BoltSteel #MachinePartsSteel #HeatTreatableSteel #NormalizedSteel #AnnealedSteel #QuenchedTemperedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #AlloySteelSupplier #EN100833Supplier #EN100833Manufacturer #EN100833Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #InfrastructureSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Kochi #Trivandrum #Goa #Aurangabad #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Bhavnagar

EN 10083-3 34CrNiMo6 is a high-strength chromium-nickel-molybdenum alloy steel grade designed for components subjected to heavy dynamic loads and high stress conditions. With a nominal carbon content of approximately 0.34% and alloying additions of chromium, nickel, and molybdenum, this grade offers excellent hardenability, superior toughness, and outstanding fatigue resistance after quenching and tempering. EN 10083-3 34CrNiMo6 alloy steel bars are widely used in automotive, heavy engineering, oil & gas, and power transmission applications. The material is manufactured in accordance with EN 10083-3, which specifies technical delivery conditions for alloy steels for quenching and tempering. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10083-3 34CrNiMo6 alloy steel bars, supplied with certified chemical composition and controlled mechanical properties to meet international standards. Forms of Supply (as per grade): Hot rolled round bars, black round bars, forged bars, peeled bars, bright round bars, square bars, flat bars Explanation of Designation (34CrNiMo6): • 34 – Approx. 0.34% carbon content • Cr – Chromium for strength, wear resistance, and hardenability • Ni – Nickel for improved toughness and impact strength • Mo – Molybdenum for enhanced hardenability, fatigue strength, and resistance to tempering softening • 6 – Indicates alloying content range as per EN standard Chemical Composition (% – typical limits): • Carbon (C): 0.30 – 0.38 • Manganese (Mn): 0.50 – 0.80 • Silicon (Si): ≤ 0.40 • Chromium (Cr): 1.30 – 1.70 • Nickel (Ni): 1.30 – 1.70 • Molybdenum (Mo): 0.15 – 0.30 • Phosphorus (P): ≤ 0.025 • Sulphur (S): ≤ 0.035 Mechanical Properties (Typical, quenched & tempered condition): • Tensile Strength: 900 – 1100 MPa (can reach higher depending on section size and heat treatment) • Yield Strength: ≥ 750 MPa • Elongation: ≥ 12% • Impact Strength: Excellent toughness even at low temperatures • Hardness: 280 – 320 HB (after heat treatment) Key Features: • High-strength Cr-Ni-Mo alloy steel • Excellent hardenability for large diameter bars • Superior fatigue and impact resistance • Very good machinability in normalized or annealed condition • Reliable performance in heavy-duty and safety-critical components Material Characteristics: EN 10083-3 34CrNiMo6 alloy steel bar combines high strength with excellent toughness and fatigue resistance. Due to its strong hardenability, it maintains uniform mechanical properties across large cross sections. The presence of molybdenum improves resistance to temper brittleness and enhances high-temperature strength. Applications: • Crankshafts and camshafts • Heavy-duty shafts and axles • Gears, pinions, and couplings • Oil & gas components • Bolts, studs, and high-strength fasteners • Forged and machined mechanical parts Conclusion: Ladhani Metal Corporation supplies premium quality EN 10083-3 34CrNiMo6 alloy steel bars in various sizes and finishes to meet demanding engineering requirements. With its excellent strength, toughness, and fatigue resistance, 34CrNiMo6 is an ideal choice for critical mechanical and structural applications. For size availability, technical data, or customized supply requirements, contact Ladhani Metal Corporation. #EN10083 #EN100833 #EN100833Steel #EN10083AlloySteel #EN10083EngineeringSteel #ENStandardSteel #AlloySteel #ChromiumSteel #34Cr4 #42Cr4 #50Cr4 #EngineeringSteelBars #AlloySteelBars #AlloySteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #ShaftSteel #GearSteel #AxleSteel #CrankshaftSteel #BoltSteel #MachinePartsSteel #HeatTreatableSteel #NormalizedSteel #AnnealedSteel #QuenchedTemperedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #AlloySteelSupplier #EN100833Supplier #EN100833Manufacturer #EN100833Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #InfrastructureSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Kochi #Trivandrum #Goa #Aurangabad #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Bhavnagar

EN 10083-3 30CrNiMo8 is a high-performance chromium-nickel-molybdenum alloy steel grade designed for applications requiring very high strength, excellent toughness, and outstanding hardenability after heat treatment. With a nominal carbon content of around 0.30% and the balanced addition of chromium, nickel, and molybdenum, 30CrNiMo8 steel offers exceptional fatigue strength and impact resistance, even in large cross-section components. Supplied in plate and bar form, EN 10083-3 30CrNiMo8 alloy steel is widely used in heavy engineering, automotive, defense, and power transmission applications. This grade is manufactured in accordance with EN 10083-3, which specifies technical delivery conditions for alloy steels for quenching and tempering. Ladhani Metal Corporation is a reliable manufacturer, supplier, and exporter of EN 10083-3 30CrNiMo8 alloy steel plates and bars. Our materials are sourced from approved mills and supplied with controlled chemical composition, consistent mechanical properties, and precise dimensional accuracy as per EN 10083-3 requirements. Forms of Supply (as per grade): Hot rolled plates, normalized plates, quenched and tempered plates, cut-to-size plates, hot rolled round bars, black round bars, forged bars, peeled bars, bright round bars, square bars, flat bars Explanation of Designation (30CrNiMo8): • 30 – Approx. 0.30% carbon content • Cr – Chromium for strength, wear resistance, and hardenability • Ni – Nickel for toughness and impact strength • Mo – Molybdenum for improved hardenability, fatigue strength, and resistance to softening • 8 – Indicates alloying content range as per EN standard Chemical Composition (% – typical limits): • Carbon (C): 0.26 – 0.34 • Manganese (Mn): 0.40 – 0.70 • Silicon (Si): ≤ 0.40 • Chromium (Cr): 1.80 – 2.20 • Nickel (Ni): 1.80 – 2.20 • Molybdenum (Mo): 0.30 – 0.50 • Phosphorus (P): ≤ 0.025 • Sulphur (S): ≤ 0.035 Mechanical Properties (Typical, quenched & tempered): • Tensile Strength: 900 – 1100 MPa • Yield Strength: ≥ 700 MPa • Elongation: ≥ 12% • Hardness: 260 – 320 HB (after heat treatment) Key Features: • Cr-Ni-Mo alloy steel with very high strength and toughness • Excellent hardenability for thick plates and large bar sections • Superior fatigue and impact resistance • Very good response to quenching and tempering • Suitable for highly stressed and safety-critical components Material Characteristics: EN 10083-3 30CrNiMo8 alloy steel in plate and bar form provides an exceptional combination of strength, toughness, and hardenability due to its high chromium, nickel, and molybdenum content. It achieves uniform mechanical properties across large sections, making it ideal for critical structural and dynamically loaded components. Applications: • Heavy-duty shafts, axles, and spindles • Gears, pinions, and drive components • High-strength plates for structural and fabricated parts • Automotive, defense, and aerospace components • Heavy engineering and power transmission equipment Conclusion: Ladhani Metal Corporation supplies high-quality EN 10083-3 30CrNiMo8 alloy steel plates and bars in various heat-treated and cut-to-size conditions with consistent quality and reliable performance. With very high strength, excellent toughness, and superior hardenability, 30CrNiMo8 steel is a dependable choice for the most demanding engineering and industrial applications. For size availability, technical specifications, or customized requirements, contact Ladhani Metal Corporation. #EN10083 #EN100833 #EN100833Steel #EN10083AlloySteel #EN10083EngineeringSteel #ENStandardSteel #AlloySteel #ChromiumSteel #34Cr4 #42Cr4 #50Cr4 #EngineeringSteelBars #AlloySteelBars #AlloySteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #ShaftSteel #GearSteel #AxleSteel #CrankshaftSteel #BoltSteel #MachinePartsSteel #HeatTreatableSteel #NormalizedSteel #AnnealedSteel #QuenchedTemperedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #AlloySteelSupplier #EN100833Supplier #EN100833Manufacturer #EN100833Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #InfrastructureSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Kochi #Trivandrum #Goa #Aurangabad #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Bhavnagar

EN 10083-3 39NiCrMo3 is a nickel-chromium-molybdenum alloy steel grade developed for applications requiring very high strength, excellent toughness, and superior fatigue resistance after heat treatment. With a nominal carbon content of around 0.39% and alloying elements such as nickel, chromium, and molybdenum, 39NiCrMo3 steel offers outstanding hardenability and mechanical performance, even in larger cross sections. Supplied in bar form, EN 10083-3 39NiCrMo3 alloy steel is widely used in heavy engineering, automotive, and power transmission applications. This grade is manufactured in accordance with EN 10083-3, which specifies technical delivery conditions for alloy steels for quenching and tempering. Ladhani Metal Corporation is a reliable manufacturer, supplier, and exporter of EN 10083-3 39NiCrMo3 alloy steel bars. Our materials are sourced from approved mills and supplied with controlled chemical composition, consistent mechanical properties, and precise dimensional accuracy as per EN 10083-3 requirements. Forms of Supply (as per grade): Hot rolled round bar, black round bar, forged bar, peeled bar, bright round bar, square bar, flat bar Explanation of Designation (39NiCrMo3): • 39 – Approx. 0.39% carbon content • Ni – Nickel for improved toughness and impact resistance • Cr – Chromium for increased strength and hardenability • Mo – Molybdenum for enhanced strength, creep resistance, and fatigue performance Chemical Composition (% – typical limits): • Carbon (C): 0.36 – 0.44 • Manganese (Mn): 0.50 – 0.80 • Silicon (Si): ≤ 0.40 • Nickel (Ni): 0.70 – 1.00 • Chromium (Cr): 0.60 – 0.90 • Molybdenum (Mo): 0.15 – 0.25 • Phosphorus (P): ≤ 0.025 • Sulphur (S): ≤ 0.035 Mechanical Properties (Typical, quenched & tempered): • Tensile Strength: 900 – 1100 MPa • Yield Strength: ≥ 700 MPa • Elongation: ≥ 11% • Hardness: 260 – 320 HB (after heat treatment) Key Features: • Ni-Cr-Mo alloy steel with excellent strength and toughness • Superior hardenability for large cross sections • Excellent fatigue and impact resistance • Very good response to quenching and tempering • Suitable for heavily loaded and safety-critical components Material Characteristics: EN 10083-3 39NiCrMo3 alloy steel bar provides an excellent balance of strength, toughness, and fatigue resistance due to its nickel, chromium, and molybdenum alloying. It responds extremely well to heat treatment, achieving high and uniform mechanical properties, making it ideal for critical engineering and automotive components. Applications: • Shafts, axles, and crankshafts • Gears, pinions, and drive components • High-strength bolts and fasteners • Forged and machined components • Heavy engineering, automotive, and power transmission parts Conclusion: Ladhani Metal Corporation supplies high-quality EN 10083-3 39NiCrMo3 alloy steel bars in various industrial bar forms with consistent quality and reliable performance. With very high strength, excellent toughness, and superior fatigue resistance, 39NiCrMo3 steel bars are a dependable choice for demanding engineering and mechanical applications. For size availability, technical specifications, or customized requirements, contact Ladhani Metal Corporation. #EN10083 #EN100833 #EN100833Steel #EN10083AlloySteel #EN10083EngineeringSteel #ENStandardSteel #AlloySteel #ChromiumSteel #34Cr4 #42Cr4 #50Cr4 #EngineeringSteelBars #AlloySteelBars #AlloySteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #ShaftSteel #GearSteel #AxleSteel #CrankshaftSteel #BoltSteel #MachinePartsSteel #HeatTreatableSteel #NormalizedSteel #AnnealedSteel #QuenchedTemperedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #AlloySteelSupplier #EN100833Supplier #EN100833Manufacturer #EN100833Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #InfrastructureSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Kochi #Trivandrum #Goa #Aurangabad #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Bhavnagar