Products

EN 10025-4 S275ML Steel Plate EN 10025-4 S275ML is a thermomechanically rolled fine-grain structural steel grade developed for structural and fabrication applications requiring reliable strength and excellent impact toughness at low temperatures. Supplied in plate, sheet, coil, and strip form, S275ML steel is delivered in thermo mechanically rolled (M) condition, ensuring a refined grain structure and consistent mechanical performance. This grade complies with the EN 10025-4 standard and is suitable for applications requiring impact testing at −50°C. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10025-4 S275ML steel plates, along with sheets, coils, and strips. Our materials are sourced from approved mills and supplied in thermo mechanically rolled condition, ensuring dimensional accuracy, uniform quality, and full compliance with EN 10025-4 requirements for fine-grain structural steels. Forms Available: plate, sheet, coil, strip Grades Available: S275M, S275ML Explanation of Designation: • S – Structural steel • 275 – Minimum yield strength in MPa • M – Thermo mechanically rolled delivery condition • L – Impact test at −50°C Chemical Composition (% – typical limits): • Carbon (C): ≤ 0.16 • Manganese (Mn): ≤ 1.50 • Phosphorus (P): ≤ 0.030 • Sulphur (S): ≤ 0.030 • Silicon (Si): ≤ 0.50 Mechanical Properties (Typical, vary by thickness): • Tensile Strength: 370 – 510 MPa • Yield Strength: ≥ 275 MPa • Elongation: 22% (for thickness ≤ 16 mm) Key Features: • impact toughness at −50°C • Thermo mechanically rolled for uniform fine-grain structure • Good strength combined with excellent low-temperature toughness • Very good weldability with controlled procedures • Stable mechanical properties across thickness ranges • Available in plate, sheet, coil, and strip forms Material Characteristics: S275ML steel plate offers enhanced low-temperature toughness along with reliable strength and good fabrication characteristics. The fine-grain structure achieved through thermomechanical rolling ensures dependable performance in cold climates and demanding structural applications. Applications: • Structural steel fabrication in cold and sub-zero environments • Offshore and marine structures • Bridges and heavy steel construction • Industrial plants and power generation structures • Civil engineering and infrastructure projects Conclusion: Ladhani Metal Corporation supplies high-quality EN 10025-4 S275ML steel plates along with sheets, coils, and strips for demanding structural applications. With excellent low-temperature impact performance, thermomechanically rolled delivery, and compliance with EN 10025-4 standards, S275ML steel plate is a dependable and economical choice for fine-grain structural steel requirements. For customized sizes, grade selection, or technical assistance, contact Ladhani Metal Corporation. #EN10025 #EN100254 #EN100254Steel #EN10025StructuralSteel #EN100254StructuralSteel #FineGrainStructuralSteel #ThermomechanicallyRolledSteel #TMCRSteel #S275M #S275ML #S355M #S355ML #S420M #S420ML #S460M #S460ML #StructuralSteelPlate #StructuralSteelSheet #StructuralSteelCoil #StructuralSteelStrip #CarbonStructuralSteel #EuropeanStructuralSteel #ConstructionSteel #SteelForConstruction #SteelForStructures #BridgeSteel #OffshoreSteel #BuildingSteel #EngineeringSteel #HeavyEngineeringSteel #FabricationSteel #SteelPlates #SteelSheets #SteelCoils #SteelStrips #HotRolledSteel #ThermomechanicallyRolled #HighStrengthSteel #WeldableSteel #LowCarbonSteel #SteelManufacturers #SteelSuppliers #SteelExporters #IndianSteel #StructuralSteelSupplier #EN100254Supplier #EN100254Manufacturer #EN100254Exporter #SteelPlatesIndia #SteelSheetsIndia #MetalIndustry #IndustrialSteel #InfrastructureSteel #CivilEngineeringSteel #EuropeanSteelStandard #ENStandardSteel #SteelStockist #SteelTrading #EN100254SteelSupplier #EN100254SteelManufacturer #EN100254SteelExporter #LadhaniMetal #Mumbai #NaviMumbai #Thane #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Gandhidham #Delhi #Faridabad #Gurugram #Noida #Ghaziabad #Jaipur #Neemrana #Ludhiana #Jalandhar #Amritsar #Chandigarh #Kolkata #Howrah #Durgapur #Bokaro #Jamshedpur #Rourkela #Bhubaneswar #Visakhapatnam #Vijayawada #Hyderabad #Chennai #Coimbatore #Salem #Hosur #Bengaluru #Tumakuru #Belagavi #Hubballi #Mangaluru #Kochi #Ernakulam #Trivandrum #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Raipur #Bhilai #Bilaspur #Jabalpur #Ujjain #Kanpur #Lucknow #Varanasi #Prayagraj

EN 10025-4 S275M is a thermomechanically rolled fine-grain structural steel grade designed for structural and fabrication applications where good strength, excellent toughness, and uniform mechanical properties are required. Supplied in sheet, plate, coil, and strip form, S275M steel is delivered in thermomechanically rolled (M) condition, providing a refined grain structure and reliable performance. This grade complies with the EN 10025-4 standard and is suitable for structures subjected to moderate and low-temperature service conditions. Ladhani Metal Corporation is a reliable manufacturer, supplier, and exporter of EN 10025-4 S275M steel sheets, along with plates, coils, and strips. Our materials are sourced from approved mills and supplied in thermomechanically rolled condition, ensuring dimensional accuracy, consistent quality, and full compliance with EN 10025-4 requirements for fine-grain structural steels. Forms Available: sheet, plate, coil, strip Grades Available: S275M, S275ML Explanation of Designation: • S – Structural steel • 275 – Minimum yield strength in MPa • M – Thermomechanically rolled delivery condition Chemical Composition (% – typical limits): • Carbon (C): ≤ 0.16 • Manganese (Mn): ≤ 1.50 • Phosphorus (P): ≤ 0.030 • Sulphur (S): ≤ 0.030 • Silicon (Si): ≤ 0.50 Mechanical Properties (Typical, vary by thickness): • Tensile Strength: 370 – 510 MPa • Yield Strength: ≥ 275 MPa • Elongation: 22% (for thickness ≤ 16 mm) Key Features: • Thermomechanically rolled for fine-grain structure • Good strength combined with excellent toughness • Improved weldability and formability • Uniform mechanical properties across thickness ranges • Suitable for low-temperature structural applications • Available in sheet, plate, coil, and strip forms Material Characteristics: S275M steel sheet offers a fine-grain microstructure achieved through thermomechanical rolling, resulting in reliable strength, good ductility, and enhanced toughness. The controlled rolling process ensures consistent performance and makes the material suitable for demanding structural applications. Applications: • Structural steel fabrication for buildings and bridges • Industrial structures and load-bearing components • Construction and civil engineering projects • Machinery frames and support structures • Outdoor and low-temperature service structures Conclusion: Ladhani Metal Corporation supplies high-quality EN 10025-4 S275M steel sheets along with plates, coils, and strips for structural and engineering applications. With thermomechanically rolled delivery, dependable mechanical properties, and compliance with EN 10025-4 standards, S275M steel sheet is a reliable and economical choice for fine-grain structural steel requirements. For customized sizes, grade selection, or technical assistance, contact Ladhani Metal Corporation.

EN 10025-3 S460NL is a high-strength normalized fine-grain structural steel grade designed for demanding structural and fabrication applications where superior yield strength and excellent impact toughness at very low temperatures are required. Supplied in strip, sheet, plate, and coil form, S460NL steel is delivered in normalized or normalized rolled condition, providing a refined grain structure and consistent mechanical performance. This grade conforms to the EN 10025-3 standard and is suitable for applications requiring impact testing at −50°C. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10025-3 S460NL steel strips, along with sheets, plates, and coils. Our materials are sourced from approved mills and supplied in normalized condition, ensuring dimensional accuracy, uniform quality, and full compliance with EN 10025-3 requirements for fine-grain structural steels. Forms Available: strip, sheet, plate, coil Grades Available: S460N, S460NL Explanation of Designation: • S – Structural steel • 460 – Minimum yield strength in MPa • N – Normalized or normalized rolled delivery condition • L – Impact test at −50°C Chemical Composition (% – typical limits): • Carbon (C): ≤ 0.22 • Manganese (Mn): ≤ 1.80 • Phosphorus (P): ≤ 0.030 • Sulphur (S): ≤ 0.030 • Silicon (Si): ≤ 0.60 Mechanical Properties (Typical, vary by thickness): • Tensile Strength: 560 – 720 MPa • Yield Strength: ≥ 460 MPa • Elongation: 18% (for thickness ≤ 16 mm) Key Features: • Guaranteed impact toughness at −50°C • Normalized delivery ensures stable and uniform mechanical properties • High yield strength for heavy-duty structural applications • Excellent weldability with controlled procedures • Fine-grain structure for enhanced strength, ductility, and toughness • Available in strip, sheet, plate, and coil forms Material Characteristics: S460NL steel strip provides a strong and tough material solution suitable for low-temperature and high-strength applications. The fine-grain microstructure and normalized condition ensure reliable fabrication, welding, and long-term structural performance in critical environments. Applications: • Structural steel fabrication in cold and sub-zero climates • Offshore and marine structures • Bridges, cranes, and heavy steel construction • Industrial plants and power generation structures • Civil engineering and infrastructure projects Conclusion: Ladhani Metal Corporation supplies high-quality EN 10025-3 S460NL steel strips along with sheets, plates, and coils for demanding structural applications. With excellent low-temperature impact performance, normalized delivery, and compliance with EN 10025-3 standards, S460NL steel strip is a dependable and economical choice for fine-grain structural steel requirements. For customized sizes, grade selection, or technical assistance, contact Ladhani Metal Corporation.

EN 10025-3 S460N is a high-strength normalized fine-grain structural steel grade designed for structural and fabrication applications requiring superior yield strength, good toughness, and uniform mechanical properties. Supplied in coil, sheet, plate, and strip form, S460N steel is delivered in normalized or normalized rolled condition, providing a refined grain structure and reliable performance. This grade conforms to the EN 10025-3 standard and is suitable for structures subjected to moderate and low-temperature service conditions. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10025-3 S460N steel coils, along with sheets, plates, and strips. Our materials are sourced from approved mills and supplied in normalized condition, ensuring dimensional accuracy, consistent quality, and full compliance with EN 10025-3 requirements for fine-grain structural steels. Forms Available: coil, sheet, plate, strip Grades Available: S460N, S460NL Explanation of Designation: • S – Structural steel • 460 – Minimum yield strength in MPa • N – Normalized or normalized rolled delivery condition Chemical Composition (% – typical limits): • Carbon (C): ≤ 0.22 • Manganese (Mn): ≤ 1.80 • Phosphorus (P): ≤ 0.030 • Sulphur (S): ≤ 0.030 • Silicon (Si): ≤ 0.60 Mechanical Properties (Typical, vary by thickness): • Tensile Strength: 560 – 720 MPa • Yield Strength: ≥ 460 MPa • Elongation: 18% (for thickness ≤ 16 mm) Key Features: • High yield strength for demanding structural applications • Normalized delivery ensures uniform mechanical properties • Good impact toughness for moderate to low-temperature service • Excellent weldability using controlled welding practices • Fine-grain structure for enhanced strength and ductility • Available in coil, sheet, plate, and strip forms Material Characteristics: S460N steel coil provides a high-strength, ductile, and tough material suitable for heavy-duty structural applications. The normalized condition ensures reliable performance during fabrication, welding, and service in demanding environments. Applications: • Heavy structural fabrication in buildings and bridges • Industrial machinery and support frames • Offshore structures and cranes • Construction and civil engineering projects • Load-bearing components in low-temperature service Conclusion: Ladhani Metal Corporation supplies high-quality EN 10025-3 S460N steel coils along with sheets, plates, and strips for high-strength structural applications. With normalized delivery, excellent mechanical properties, and compliance with EN 10025-3 standards, S460N steel coil is a reliable and economical choice for fine-grain structural steel requirements. For customized sizes, grade selection, or technical assistance, contact Ladhani Metal Corporation. #EN10025 #EN100253 #EN100253Steel #EN10025StructuralSteel #EN100253StructuralSteel #FineGrainStructuralSteel #NormalizedSteel #S275N #S275NL #S355N #S355NL #StructuralSteelPlate #StructuralSteelSheet #StructuralSteelCoil #StructuralSteelStrip #CarbonStructuralSteel #EuropeanStructuralSteel #ConstructionSteel #SteelForConstruction #SteelForStructures #BridgeSteel #OffshoreSteel #BuildingSteel #EngineeringSteel #HeavyEngineeringSteel #FabricationSteel #SteelPlates #SteelSheets #SteelCoils #SteelStrips #HotRolledSteel #NormalizedRolledSteel #HighStrengthSteel #WeldableSteel #LowCarbonSteel #SteelManufacturers #SteelSuppliers #SteelExporters #IndianSteel #StructuralSteelSupplier #EN100253Supplier #EN100253Manufacturer #EN100253Exporter #SteelPlatesIndia #SteelSheetsIndia #MetalIndustry #IndustrialSteel #InfrastructureSteel #CivilEngineeringSteel #EuropeanSteelStandard #ENStandardSteel #SteelStockist #SteelTrading #EN100253SteelSupplier #EN100253SteelManufacturer #EN100253SteelExporter #LadhaniMetal #Mumbai #NaviMumbai #Thane #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Gandhidham #Delhi #Faridabad #Gurugram #Noida #Ghaziabad #Jaipur #Neemrana #Ludhiana #Jalandhar #Amritsar #Chandigarh #Kolkata #Howrah #Durgapur #Bokaro #Jamshedpur #Rourkela #Bhubaneswar #Visakhapatnam #Vijayawada #Hyderabad #Chennai #Coimbatore #Salem #Hosur #Bengaluru #Tumakuru #Belagavi #Hubballi #Mangaluru #Kochi #Ernakulam #Trivandrum #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Raipur #Bhilai #Bilaspur #Jabalpur #Ujjain #Kanpur #Lucknow #Varanasi #Prayagraj

EN 10025-3 S420NL is a high-strength normalized fine-grain structural steel grade intended for demanding structural and fabrication applications where superior strength and excellent impact toughness at very low temperatures are required. Supplied in plate, sheet, coil, and strip form, S420NL steel is delivered in normalized or normalized rolled condition, ensuring a refined grain structure and consistent mechanical performance. This grade complies with EN 10025-3 and is suitable for applications requiring impact testing at −50°C. Ladhani Metal Corporation is a reliable manufacturer, supplier, and exporter of EN 10025-3 S420NL steel plates, along with sheets, coils, and strips. Our materials are sourced from approved mills and supplied in normalized condition, ensuring dimensional accuracy, uniform quality, and full compliance with EN 10025-3 requirements for fine-grain structural steels. Forms Available: plate, sheet, coil, strip Grades Available: S420N, S420NL Explanation of Designation: • S – Structural steel • 420 – Minimum yield strength in MPa • N – Normalized or normalized rolled delivery condition • L – Impact test at −50°C Chemical Composition (% – typical limits): • Carbon (C): ≤ 0.20 • Manganese (Mn): ≤ 1.70 • Phosphorus (P): ≤ 0.030 • Sulphur (S): ≤ 0.030 • Silicon (Si): ≤ 0.60 Mechanical Properties (Typical, vary by thickness): • Tensile Strength: 520 – 680 MPa • Yield Strength: ≥ 420 MPa • Elongation: 19% (for thickness ≤ 16 mm) Key Features: • Guaranteed impact toughness at −50°C • Normalized delivery for uniform and stable properties • High yield strength for heavy-duty structural applications • Very good weldability with controlled procedures • Fine-grain structure for enhanced strength and toughness • Available in plate, sheet, coil, and strip forms Material Characteristics: S420NL steel plate combines high strength with excellent low-temperature toughness. The fine-grain microstructure and normalized condition ensure dependable fabrication, reliable welding behavior, and long-term structural performance in harsh and cold environments. Applications: • Structural steel fabrication in cold and sub-zero climates • Offshore structures and marine applications • Bridges, cranes, and heavy steel construction • Industrial plants and power generation structures • Civil engineering and infrastructure projects Conclusion: Ladhani Metal Corporation supplies high-quality EN 10025-3 S420NL steel plates along with sheets, coils, and strips for demanding structural applications. With superior low-temperature impact performance, normalized delivery, and compliance with EN 10025-3 standards, S420NL steel plate is a dependable and economical choice for high-strength fine-grain structural steel requirements. For customized sizes, grade selection, or technical assistance, contact Ladhani Metal Corporation.

EN 10025-3 S420N is a high-strength normalized fine-grain structural steel grade developed for demanding structural and fabrication applications where higher yield strength, good toughness, and uniform mechanical properties are required. Supplied in sheet, plate, coil, and strip form, S420N steel is delivered in normalized or normalized rolled condition, ensuring a refined grain structure and reliable performance. This grade complies with EN 10025-3 and is suitable for structures subjected to moderate and low-temperature service conditions. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10025-3 S420N steel sheets, along with plates, coils, and strips. Our materials are sourced from approved mills and supplied in normalized condition, ensuring dimensional accuracy, consistent quality, and full compliance with EN 10025-3 requirements for fine-grain structural steels. Forms Available: sheet, plate, coil, strip Grades Available: S420N, S420NL Explanation of Designation: • S – Structural steel • 420 – Minimum yield strength in MPa • N – Normalized or normalized rolled delivery condition Chemical Composition (% – typical limits): • Carbon (C): ≤ 0.20 • Manganese (Mn): ≤ 1.70 • Phosphorus (P): ≤ 0.030 • Sulphur (S): ≤ 0.030 • Silicon (Si): ≤ 0.60 Mechanical Properties (Typical, vary by thickness): • Tensile Strength: 520 – 680 MPa • Yield Strength: ≥ 420 MPa • Elongation: 19% (for thickness ≤ 16 mm) Key Features: • Normalized delivery for stable and consistent properties • High yield strength for demanding load-bearing applications • Good impact toughness at lower temperatures • Excellent weldability with controlled heat input • Fine-grain structure for enhanced strength and toughness • Available in sheet, plate, coil, and strip forms Material Characteristics: S420N steel sheet offers a strong balance of high strength, ductility, and toughness. The fine-grain microstructure obtained through normalization ensures predictable fabrication behavior and dependable structural performance in demanding environments. Applications: • Heavy structural fabrication and steel construction • Bridges, cranes, and lifting equipment • Industrial plants and machinery structures • Construction and civil engineering projects • Load-bearing components in low-temperature service Conclusion: Ladhani Metal Corporation supplies high-quality EN 10025-3 S420N steel sheets along with plates, coils, and strips for high-strength structural applications. With normalized delivery, excellent mechanical properties, and compliance with EN 10025-3 standards, S420N steel sheet is a reliable and economical choice for fine-grain structural steel requirements. For customized sizes, grade selection, or technical assistance, contact Ladhani Metal Corporation. #EN10025 #EN100253 #EN100253Steel #EN10025StructuralSteel #EN100253StructuralSteel #FineGrainStructuralSteel #NormalizedSteel #S275N #S275NL #S355N #S355NL #StructuralSteelPlate #StructuralSteelSheet #StructuralSteelCoil #StructuralSteelStrip #CarbonStructuralSteel #EuropeanStructuralSteel #ConstructionSteel #SteelForConstruction #SteelForStructures #BridgeSteel #OffshoreSteel #BuildingSteel #EngineeringSteel #HeavyEngineeringSteel #FabricationSteel #SteelPlates #SteelSheets #SteelCoils #SteelStrips #HotRolledSteel #NormalizedRolledSteel #HighStrengthSteel #WeldableSteel #LowCarbonSteel #SteelManufacturers #SteelSuppliers #SteelExporters #IndianSteel #StructuralSteelSupplier #EN100253Supplier #EN100253Manufacturer #EN100253Exporter #SteelPlatesIndia #SteelSheetsIndia #MetalIndustry #IndustrialSteel #InfrastructureSteel #CivilEngineeringSteel #EuropeanSteelStandard #ENStandardSteel #SteelStockist #SteelTrading #EN100253SteelSupplier #EN100253SteelManufacturer #EN100253SteelExporter #LadhaniMetal #Mumbai #NaviMumbai #Thane #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Gandhidham #Delhi #Faridabad #Gurugram #Noida #Ghaziabad #Jaipur #Neemrana #Ludhiana #Jalandhar #Amritsar #Chandigarh #Kolkata #Howrah #Durgapur #Bokaro #Jamshedpur #Rourkela #Bhubaneswar #Visakhapatnam #Vijayawada #Hyderabad #Chennai #Coimbatore #Salem #Hosur #Bengaluru #Tumakuru #Belagavi #Hubballi #Mangaluru #Kochi #Ernakulam #Trivandrum #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Raipur #Bhilai #Bilaspur #Jabalpur #Ujjain #Kanpur #Lucknow #Varanasi #Prayagraj

EN 10025-3 S355NL is a normalized fine-grain structural steel grade intended for demanding structural and fabrication applications where high strength and excellent impact toughness at very low temperatures are required. Supplied in strip, sheet, plate, and coil form, S355NL steel is delivered in normalized or normalized rolled condition, ensuring a refined grain structure and consistent mechanical performance. This grade conforms to the EN 10025-3 standard and is suitable for use in applications requiring impact testing at −50°C. Ladhani Metal Corporation is a reliable manufacturer, supplier, and exporter of EN 10025-3 S355NL steel strips, along with sheets, plates, and coils. Our materials are sourced from approved mills and supplied in normalized condition, ensuring dimensional accuracy, uniform quality, and full compliance with EN 10025-3 requirements for fine-grain structural steels. Forms Available: strip, sheet, plate, coil Grades Available: S355N, S355NL Explanation of Designation: • S – Structural steel • 355 – Minimum yield strength in MPa • N – Normalized or normalized rolled delivery condition • L – Impact test at −50°C Chemical Composition (% – typical limits): • Carbon (C): ≤ 0.20 • Manganese (Mn): ≤ 1.60 • Phosphorus (P): ≤ 0.030 • Sulphur (S): ≤ 0.030 • Silicon (Si): ≤ 0.55 Mechanical Properties (Typical, vary by thickness): • Tensile Strength: 470 – 630 MPa • Yield Strength: ≥ 355 MPa • Elongation: 22% (for thickness ≤ 16 mm) Key Features: • Guaranteed impact toughness at −50°C • Normalized delivery for stable and uniform properties • High strength combined with excellent low-temperature toughness • Very good weldability with standard welding procedures • Fine-grain structure for enhanced mechanical performance • Available in strip, sheet, plate, and coil forms Material Characteristics: S355NL steel strip offers a combination of high strength, ductility, and superior toughness in low-temperature environments. The fine-grain microstructure and normalized condition ensure dependable fabrication and long-term structural reliability in critical applications. Applications: • Structural steel fabrication in cold and sub-zero environments • Offshore structures and marine applications • Bridges and heavy steel construction • Industrial and power plant structures • Civil engineering and infrastructure projects Conclusion: Ladhani Metal Corporation supplies high-quality EN 10025-3 S355NL steel strips along with sheets, plates, and coils for demanding structural applications. With excellent low-temperature impact performance, normalized delivery, and compliance with EN 10025-3 standards, S355NL steel strip is a dependable and economical choice for fine-grain structural steel requirements. For customized sizes, grade selection, or technical assistance, contact Ladhani Metal Corporation. #EN10025 #EN100253 #EN100253Steel #EN10025StructuralSteel #EN100253StructuralSteel #FineGrainStructuralSteel #NormalizedSteel #S275N #S275NL #S355N #S355NL #StructuralSteelPlate #StructuralSteelSheet #StructuralSteelCoil #StructuralSteelStrip #CarbonStructuralSteel #EuropeanStructuralSteel #ConstructionSteel #SteelForConstruction #SteelForStructures #BridgeSteel #OffshoreSteel #BuildingSteel #EngineeringSteel #HeavyEngineeringSteel #FabricationSteel #SteelPlates #SteelSheets #SteelCoils #SteelStrips #HotRolledSteel #NormalizedRolledSteel #HighStrengthSteel #WeldableSteel #LowCarbonSteel #SteelManufacturers #SteelSuppliers #SteelExporters #IndianSteel #StructuralSteelSupplier #EN100253Supplier #EN100253Manufacturer #EN100253Exporter #SteelPlatesIndia #SteelSheetsIndia #MetalIndustry #IndustrialSteel #InfrastructureSteel #CivilEngineeringSteel #EuropeanSteelStandard #ENStandardSteel #SteelStockist #SteelTrading #EN100253SteelSupplier #EN100253SteelManufacturer #EN100253SteelExporter #LadhaniMetal #Mumbai #NaviMumbai #Thane #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Gandhidham #Delhi #Faridabad #Gurugram #Noida #Ghaziabad #Jaipur #Neemrana #Ludhiana #Jalandhar #Amritsar #Chandigarh #Kolkata #Howrah #Durgapur #Bokaro #Jamshedpur #Rourkela #Bhubaneswar #Visakhapatnam #Vijayawada #Hyderabad #Chennai #Coimbatore #Salem #Hosur #Bengaluru #Tumakuru #Belagavi #Hubballi #Mangaluru #Kochi #Ernakulam #Trivandrum #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Raipur #Bhilai #Bilaspur #Jabalpur #Ujjain #Kanpur #Lucknow #Varanasi #Prayagraj

EN 10025-3 S355N is a normalized fine-grain structural steel grade developed for structural and fabrication applications requiring high strength, good toughness, and uniform mechanical properties. Supplied in coil, sheet, plate, and strip form, S355N steel is delivered in normalized or normalized rolled condition, ensuring a refined grain structure and reliable performance. This grade complies with EN 10025-3 and is suitable for structures exposed to moderate and low-temperature service conditions. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10025-3 S355N steel coils, along with sheets, plates, and strips. Our materials are sourced from approved mills and supplied in normalized condition, ensuring dimensional accuracy, consistent quality, and full compliance with EN 10025-3 requirements for fine-grain structural steels. Forms Available: coil, sheet, plate, strip Grades Available: S355N, S355NL Explanation of Designation: • S – Structural steel • 355 – Minimum yield strength in MPa • N – Normalized or normalized rolled delivery condition Chemical Composition (% – typical limits): • Carbon (C): ≤ 0.20 • Manganese (Mn): ≤ 1.60 • Phosphorus (P): ≤ 0.030 • Sulphur (S): ≤ 0.030 • Silicon (Si): ≤ 0.55 Mechanical Properties (Typical, vary by thickness): • Tensile Strength: 470 – 630 MPa • Yield Strength: ≥ 355 MPa • Elongation: 22% (for thickness ≤ 16 mm) Key Features: • Normalized delivery for consistent and stable properties • High strength combined with good toughness • Excellent weldability with standard welding practices • Fine-grain structure for improved mechanical performance • Suitable for low-temperature structural applications • Available in coil, sheet, plate, and strip forms Material Characteristics: S355N steel coil provides a strong and reliable material solution with enhanced toughness and uniform performance across sections. The normalized condition ensures predictable behavior during fabrication and in service, even under demanding structural loads. Applications: • Structural steel fabrication for buildings and bridges • Heavy-duty frames, beams, and load-bearing structures • Industrial plants and machinery components • Construction and civil engineering projects • Outdoor and low-temperature service structures Conclusion: Ladhani Metal Corporation supplies high-quality EN 10025-3 S355N steel coils along with sheets, plates, and strips for high-strength structural applications. With normalized delivery, dependable mechanical properties, and compliance with EN 10025-3 standards, S355N steel coil is a reliable and economical choice for fine-grain structural steel requirements. For customized sizes, grade selection, or technical assistance, contact Ladhani Metal Corporation. #EN10025 #EN100253 #EN100253Steel #EN10025StructuralSteel #EN100253StructuralSteel #FineGrainStructuralSteel #NormalizedSteel #S275N #S275NL #S355N #S355NL #StructuralSteelPlate #StructuralSteelSheet #StructuralSteelCoil #StructuralSteelStrip #CarbonStructuralSteel #EuropeanStructuralSteel #ConstructionSteel #SteelForConstruction #SteelForStructures #BridgeSteel #OffshoreSteel #BuildingSteel #EngineeringSteel #HeavyEngineeringSteel #FabricationSteel #SteelPlates #SteelSheets #SteelCoils #SteelStrips #HotRolledSteel #NormalizedRolledSteel #HighStrengthSteel #WeldableSteel #LowCarbonSteel #SteelManufacturers #SteelSuppliers #SteelExporters #IndianSteel #StructuralSteelSupplier #EN100253Supplier #EN100253Manufacturer #EN100253Exporter #SteelPlatesIndia #SteelSheetsIndia #MetalIndustry #IndustrialSteel #InfrastructureSteel #CivilEngineeringSteel #EuropeanSteelStandard #ENStandardSteel #SteelStockist #SteelTrading #EN100253SteelSupplier #EN100253SteelManufacturer #EN100253SteelExporter #LadhaniMetal #Mumbai #NaviMumbai #Thane #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Gandhidham #Delhi #Faridabad #Gurugram #Noida #Ghaziabad #Jaipur #Neemrana #Ludhiana #Jalandhar #Amritsar #Chandigarh #Kolkata #Howrah #Durgapur #Bokaro #Jamshedpur #Rourkela #Bhubaneswar #Visakhapatnam #Vijayawada #Hyderabad #Chennai #Coimbatore #Salem #Hosur #Bengaluru #Tumakuru #Belagavi #Hubballi #Mangaluru #Kochi #Ernakulam #Trivandrum #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Raipur #Bhilai #Bilaspur #Jabalpur #Ujjain #Kanpur #Lucknow #Varanasi #Prayagraj

EN 10025-3 S275NL is a normalized fine-grain structural steel grade designed for structural and fabrication applications requiring reliable strength and enhanced impact toughness at low temperatures. Supplied in plate, sheet, coil, and strip form, S275NL steel is delivered in normalized or normalized rolled condition, providing a refined grain structure and consistent mechanical performance. This grade conforms to the EN 10025-3 standard and is suitable for use in applications where impact testing at −50°C is specified. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10025-3 S275NL steel plates, along with sheets, coils, and strips. Our materials are sourced from approved mills and supplied in normalized condition, ensuring dimensional accuracy, uniform mechanical properties, and full compliance with EN 10025-3 requirements for fine-grain structural steels. Forms Available: plate, sheet, coil, strip Grades Available: S275N, S275NL Explanation of Designation: • S – Structural steel • 275 – Minimum yield strength in MPa • N – Normalized or normalized rolled delivery condition • L – Impact test at −50°C Chemical Composition (% – typical limits): • Carbon (C): ≤ 0.20 • Manganese (Mn): ≤ 1.60 • Phosphorus (P): ≤ 0.030 • Sulphur (S): ≤ 0.030 • Silicon (Si): ≤ 0.55 Mechanical Properties (Typical, vary by thickness): • Tensile Strength: 370 – 510 MPa • Yield Strength: ≥ 275 MPa • Elongation: 22% (for thickness ≤ 16 mm) Key Features: • Guaranteed impact toughness at −50°C • Normalized delivery for consistent mechanical properties • Excellent weldability with standard welding procedures • Fine-grain structure for improved toughness and strength • Suitable for low-temperature and offshore applications • Available in plate, sheet, coil, and strip forms Material Characteristics: S275NL steel plate offers enhanced low-temperature toughness combined with reliable strength and good fabrication properties. The fine-grain microstructure and normalized condition ensure stable performance in demanding service environments, including cold climates. Applications: • Structural steel fabrication in cold and sub-zero environments • Bridges, offshore structures, and heavy steel construction • Industrial and power plant structures • Storage tanks and pressure-related structural components • Civil engineering and infrastructure projects Conclusion: Ladhani Metal Corporation supplies high-quality EN 10025-3 S275NL steel plates along with sheets, coils, and strips for demanding structural applications. With excellent low-temperature impact performance, normalized delivery, and compliance with EN 10025-3 standards, S275NL steel plate is a dependable and economical choice for fine-grain structural steel requirements. For customized sizes, grade selection, or technical assistance, contact Ladhani Metal Corporation. #EN10025 #EN100253 #EN100253Steel #EN10025StructuralSteel #EN100253StructuralSteel #FineGrainStructuralSteel #NormalizedSteel #S275N #S275NL #S355N #S355NL #StructuralSteelPlate #StructuralSteelSheet #StructuralSteelCoil #StructuralSteelStrip #CarbonStructuralSteel #EuropeanStructuralSteel #ConstructionSteel #SteelForConstruction #SteelForStructures #BridgeSteel #OffshoreSteel #BuildingSteel #EngineeringSteel #HeavyEngineeringSteel #FabricationSteel #SteelPlates #SteelSheets #SteelCoils #SteelStrips #HotRolledSteel #NormalizedRolledSteel #HighStrengthSteel #WeldableSteel #LowCarbonSteel #SteelManufacturers #SteelSuppliers #SteelExporters #IndianSteel #StructuralSteelSupplier #EN100253Supplier #EN100253Manufacturer #EN100253Exporter #SteelPlatesIndia #SteelSheetsIndia #MetalIndustry #IndustrialSteel #InfrastructureSteel #CivilEngineeringSteel #EuropeanSteelStandard #ENStandardSteel #SteelStockist #SteelTrading #EN100253SteelSupplier #EN100253SteelManufacturer #EN100253SteelExporter #LadhaniMetal #Mumbai #NaviMumbai #Thane #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Gandhidham #Delhi #Faridabad #Gurugram #Noida #Ghaziabad #Jaipur #Neemrana #Ludhiana #Jalandhar #Amritsar #Chandigarh #Kolkata #Howrah #Durgapur #Bokaro #Jamshedpur #Rourkela #Bhubaneswar #Visakhapatnam #Vijayawada #Hyderabad #Chennai #Coimbatore #Salem #Hosur #Bengaluru #Tumakuru #Belagavi #Hubballi #Mangaluru #Kochi #Ernakulam #Trivandrum #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Raipur #Bhilai #Bilaspur #Jabalpur #Ujjain #Kanpur #Lucknow #Varanasi #Prayagraj

EN 10025-3 S275N is a normalized fine-grain structural steel grade intended for structural and fabrication applications where improved strength, toughness, and uniform mechanical properties are required. Supplied in sheet, plate, coil, and strip form, S275N steel is delivered in normalized or normalized rolled condition, ensuring enhanced notch toughness and consistent performance. This grade complies with EN 10025-3 and is suitable for structures exposed to moderate and low-temperature service conditions. Ladhani Metal Corporation is a reliable manufacturer, supplier, and exporter of EN 10025-3 S275N steel sheets, along with plates, coils, and strips. Our materials are sourced from approved mills and supplied in normalized condition, ensuring dimensional accuracy, stable mechanical properties, and full compliance with EN 10025-3 requirements for fine-grain structural steels. Forms Available: sheet, plate, coil, strip Grades Available: S275N, S275NL Explanation of Designation: • S – Structural steel • 275 – Minimum yield strength in MPa • N – Normalized or normalized rolled delivery condition Chemical Composition (% – typical limits): • Carbon (C): ≤ 0.20 • Manganese (Mn): ≤ 1.60 • Phosphorus (P): ≤ 0.030 • Sulphur (S): ≤ 0.030 • Silicon (Si): ≤ 0.55 Mechanical Properties (Typical, vary by thickness): • Tensile Strength: 370 – 510 MPa • Yield Strength: ≥ 275 MPa • Elongation: 22% (for thickness ≤ 16 mm) Key Features: • Supplied in normalized or normalized rolled condition • Improved toughness compared to as-rolled structural steels • Good weldability with standard welding practices • Uniform mechanical properties across thickness ranges • Suitable for low-temperature structural applications • Available in sheet, plate, coil, and strip forms Material Characteristics: S275N steel sheet offers a fine-grain microstructure that enhances strength, ductility, and impact toughness. The normalized delivery condition ensures consistent performance and makes the material suitable for demanding structural applications where reliability and safety are critical. Applications: • Structural steel fabrication for buildings and bridges • Industrial structures and load-bearing components • Construction and civil engineering projects • Machinery frames and support structures • Outdoor and low-temperature service structures Conclusion: Ladhani Metal Corporation supplies high-quality EN 10025-3 S275N steel sheets along with plates, coils, and strips for structural and engineering applications. With normalized delivery, dependable mechanical properties, and compliance with EN 10025-3 standards, S275N steel sheet is a reliable and economical choice for fine-grain structural steel requirements. For customized sizes, grade selection, or technical assistance, contact Ladhani Metal Corporation. #EN10025 #EN100253 #EN100253Steel #EN10025StructuralSteel #EN100253StructuralSteel #FineGrainStructuralSteel #NormalizedSteel #S275N #S275NL #S355N #S355NL #StructuralSteelPlate #StructuralSteelSheet #StructuralSteelCoil #StructuralSteelStrip #CarbonStructuralSteel #EuropeanStructuralSteel #ConstructionSteel #SteelForConstruction #SteelForStructures #BridgeSteel #OffshoreSteel #BuildingSteel #EngineeringSteel #HeavyEngineeringSteel #FabricationSteel #SteelPlates #SteelSheets #SteelCoils #SteelStrips #HotRolledSteel #NormalizedRolledSteel #HighStrengthSteel #WeldableSteel #LowCarbonSteel #SteelManufacturers #SteelSuppliers #SteelExporters #IndianSteel #StructuralSteelSupplier #EN100253Supplier #EN100253Manufacturer #EN100253Exporter #SteelPlatesIndia #SteelSheetsIndia #MetalIndustry #IndustrialSteel #InfrastructureSteel #CivilEngineeringSteel #EuropeanSteelStandard #ENStandardSteel #SteelStockist #SteelTrading #EN100253SteelSupplier #EN100253SteelManufacturer #EN100253SteelExporter #LadhaniMetal #Mumbai #NaviMumbai #Thane #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Gandhidham #Delhi #Faridabad #Gurugram #Noida #Ghaziabad #Jaipur #Neemrana #Ludhiana #Jalandhar #Amritsar #Chandigarh #Kolkata #Howrah #Durgapur #Bokaro #Jamshedpur #Rourkela #Bhubaneswar #Visakhapatnam #Vijayawada #Hyderabad #Chennai #Coimbatore #Salem #Hosur #Bengaluru #Tumakuru #Belagavi #Hubballi #Mangaluru #Kochi #Ernakulam #Trivandrum #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Raipur #Bhilai #Bilaspur #Jabalpur #Ujjain #Kanpur #Lucknow #Varanasi #Prayagraj

EN 10025-2 S355J2 is a high-strength non-alloy structural steel grade designed for structural and fabrication applications requiring superior strength and reliable impact toughness at low temperatures. Supplied in sheet, plate, coil, and strip form, S355J2 steel offers excellent weldability, good formability, and uniform mechanical properties. This grade conforms to the EN 10025-2 standard and is suitable for use in applications where impact testing at −20°C is specified. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10025-2 S355J2 steel sheets, along with plates, coils, and strips. Our materials are sourced from approved mills and supplied in hot-rolled condition, ensuring consistent quality, dimensional accuracy, and full compliance with EN 10025-2 requirements for structural applications. Forms Available: sheet, plate, coil, strip Grades Available: S355JR, S355J0, S355J2, S355K2 Explanation of Designation: • S – Structural steel • 355 – Minimum yield strength in MPa • J2 – Impact test at −20°C Chemical Composition (% – typical limits): • Carbon (C): ≤ 0.24 • Manganese (Mn): ≤ 1.60 • Phosphorus (P): ≤ 0.035 • Sulphur (S): ≤ 0.035 • Silicon (Si): ≤ 0.55 Mechanical Properties (Typical, vary by thickness): • Tensile Strength: 470 – 630 MPa • Yield Strength: ≥ 355 MPa • Elongation: 22% (for thickness ≤ 16 mm) Key Features: • Verified impact toughness at −20°C • High strength for demanding structural applications • Excellent weldability using standard welding procedures • Good formability for bending and fabrication • Uniform mechanical properties across thickness ranges • Available in sheet, plate, coil, and strip forms Material Characteristics: S355J2 steel sheet provides a robust combination of high strength, ductility, and low-temperature toughness. The controlled chemical composition ensures reliable welding behavior and stable mechanical performance in demanding service environments. Applications: • Structural steel fabrication for buildings and bridges • Heavy-duty frames, beams, and supports • Industrial machinery and equipment • Construction and civil engineering projects • Low-temperature and outdoor structural applications Conclusion: Ladhani Metal Corporation supplies high-quality EN 10025-2 S355J2 steel sheets along with plates, coils, and strips for high-strength and low-temperature structural applications. With excellent weldability, dependable impact performance at −20°C, and full compliance with EN 10025-2 standards, S355J2 steel sheet is a reliable and economical choice for demanding engineering projects. For customized sizes, grade selection, or technical assistance, contact Ladhani Metal Corporation.

EN 10025-2 S355J0 is a high-strength non-alloy structural steel grade developed for structural and fabrication applications where higher strength and verified impact toughness at lower temperatures are required. Supplied in strip, sheet, plate, and coil form, S355J0 steel offers excellent weldability, good formability, and uniform mechanical properties. This grade complies with the EN 10025-2 standard and is suitable for use in applications requiring impact testing at 0°C. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10025-2 S355J0 steel strips, along with sheets, plates, and coils. Our materials are sourced from approved mills and supplied in hot-rolled condition, ensuring consistent quality, dimensional accuracy, and full compliance with EN 10025-2 requirements for structural applications. Forms Available: strip, sheet, plate, coil Grades Available: S355JR, S355J0, S355J2, S355K2 Explanation of Designation: • S – Structural steel • 355 – Minimum yield strength in MPa • J0 – Impact test at 0°C Chemical Composition (% – typical limits): • Carbon (C): ≤ 0.24 • Manganese (Mn): ≤ 1.60 • Phosphorus (P): ≤ 0.035 • Sulphur (S): ≤ 0.035 • Silicon (Si): ≤ 0.55 Mechanical Properties (Typical, vary by thickness): • Tensile Strength: 470 – 630 MPa • Yield Strength: ≥ 355 MPa • Elongation: 22% (for thickness ≤ 16 mm) Key Features: • Verified impact toughness at 0°C • High strength for demanding structural applications • Excellent weldability using standard welding procedures • Good formability for bending and fabrication • Uniform mechanical properties across thickness ranges • Available in strip, sheet, plate, and coil forms Material Characteristics: S355J0 steel strip provides a strong and reliable material solution with enhanced toughness at lower temperatures. The balanced chemical composition ensures stable welding behavior and good fabrication characteristics while maintaining high load-bearing capacity. Applications: • Structural steel fabrication and frameworks • Industrial machinery and equipment components • Heavy-duty supports, frames, and brackets • Construction and civil engineering projects • Transportation and material handling systems Conclusion: Ladhani Metal Corporation supplies high-quality EN 10025-2 S355J0 steel strips along with sheets, plates, and coils for high-strength structural applications. With dependable impact performance at 0°C, excellent weldability, and compliance with EN 10025-2 standards, S355J0 steel strip is a reliable and economical choice for demanding engineering requirements. For customized sizes, grade selection, or technical assistance, contact Ladhani Metal Corporation. #EN10025 #EN100252 #EN100252Steel #EN10025StructuralSteel #EN100252StructuralSteel #S235JR #S275JR #S355JR #S355J2 #StructuralSteelPlate #StructuralSteelSheet #CarbonStructuralSteel #EuropeanStructuralSteel #ConstructionSteel #SteelForConstruction #SteelForStructures #BridgeSteel #BuildingSteel #EngineeringSteel #FabricationSteel #SteelPlates #SteelSheets #HotRolledSteel #LowCarbonSteel #WeldableSteel #MachinableSteel #SteelManufacturers #SteelSuppliers #SteelExporters #IndianSteel #StructuralSteelSupplier #EN10025Supplier #EN10025Manufacturer #EN10025Exporter #SteelPlatesIndia #SteelSheetsIndia #MetalIndustry #IndustrialSteel #HeavyEngineering #InfrastructureSteel #CivilEngineeringSteel #ASTMEquivalentSteel #EuropeanSteelStandard #ENStandardSteel #SteelStockist #SteelTrading #EN10025SteelSupplier #EN10025SteelManufacturer #EN10025SteelExporter #LadhaniMetal#Mumbai #NaviMumbai #Thane #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Gandhidham #Delhi #Faridabad #Gurugram #Noida #Ghaziabad #Jaipur #Neemrana #Ludhiana #Jalandhar #Amritsar #Chandigarh #Kolkata #Howrah #Durgapur #Bokaro #Jamshedpur #Rourkela #Bhubaneswar #Visakhapatnam #Vijayawada #Hyderabad #Chennai #Coimbatore #Salem #Hosur #Bengaluru #Tumakuru #Belagavi #Hubballi #Mangaluru #Kochi #Ernakulam #Trivandrum #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Raipur #Bhilai #Bilaspur #Jabalpur #Ujjain #Kanpur #Lucknow #Varanasi #Prayagraj