Products

EN 10088-3 X17CrNi16-2 is an austenitic stainless steel grade designed for applications requiring excellent corrosion resistance, good strength, and superior toughness. Supplied in rod and bar form, X17CrNi16-2 stainless steel is widely used in engineering and industrial components where durability, formability, and resistance to corrosion in moderately aggressive environments are required. This grade conforms to the EN 10088-3 standard, which specifies technical delivery conditions for stainless steel rods, bars, and related long products for general purposes. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X17CrNi16-2 stainless steel rods and bars. Our materials are sourced from approved mills and supplied in full compliance with EN 10088-3 specifications, ensuring consistent chemical composition, precise dimensions, controlled mechanical properties, and reliable performance. Forms of Supply: Round bar, hex bar, square bar, rectangular bar, flat bar, rod Explanation of Designation (X17CrNi16-2): • X – High-alloy steel • 17 – Approx. 0.17% carbon content • CrNi16-2 – Approx. 16% chromium, 2% nickel Chemical Composition (% – typical limits): • Carbon (C): ≤ 0.17 • Chromium (Cr): 15.5 – 17.5 • Nickel (Ni): 1.5 – 2.5 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 2.00 • Phosphorus (P): ≤ 0.040 • Sulphur (S): ≤ 0.015 Mechanical Properties (Typical, depending on heat treatment): • Tensile Strength: 500 – 700 MPa • Yield Strength: ≥ 200 MPa • Elongation: 40 – 50% • Hardness: Typically 170 – 230 HB Key Features: • Austenitic stainless steel with excellent corrosion resistance • Good toughness and ductility even at low temperatures • Non-magnetic in annealed condition • Easy to form, bend, and machine • Heat-treatable to enhance strength if required • Suitable for rods and bars requiring high corrosion resistance Material Characteristics: EN 10088-3 X17CrNi16-2 stainless steel rod and bar combines excellent corrosion resistance with high toughness and formability. Its austenitic structure ensures reliable performance under mechanical stress and in mildly corrosive to aggressive environments. Applications: • Shafts, spindles, and axles • Pump and valve components • Machine parts and engineering components • Fasteners, studs, and pins • Food processing and chemical equipment • Marine and offshore components Conclusion: Ladhani Metal Corporation supplies high-quality EN 10088-3 X17CrNi16-2 stainless steel rods and bars in round, hex, square, rectangular, flat, and rod forms. With excellent corrosion resistance, toughness, and mechanical properties, X17CrNi16-2 stainless steel is a reliable choice for industrial, engineering, and chemical applications. For size availability or technical support, contact Ladhani Metal Corporation. #EN10088 #EN100883 #EN100883Steel #EN10088StainlessSteel #StainlessSteel #EuropeanStainlessSteel #ENStandardStainlessSteel #EN10088Supplier #EN10088Manufacturer #EN10088Stockist #EN10088Exporter #StainlessSteelBars #StainlessSteelRods #StainlessSteelWire #StainlessSteelBrightBar #SSRoundBar #SSFlatBar #SSHexBar #SSSquareBar #AusteniticStainlessSteel #FerriticStainlessSteel #MartensiticStainlessSteel #DuplexStainlessSteel #304StainlessSteel #304LStainlessSteel #316StainlessSteel #316LStainlessSteel #2205Duplex #StainlessSteelManufacturers #StainlessSteelSuppliers #StainlessSteelStockist #StainlessSteelExporters #IndianStainlessSteel #SSStockist #SSExporter #SteelIndustry #MetalIndustry #EngineeringSteel #IndustrialSteel #CorrosionResistantSteel #HighStrengthStainlessSteel #WeldableStainlessSteel #MachiningSteel #BrightBars #SteelBars #SteelRods #SteelWire #InfrastructureSteel #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar

EN 10088-3 X46Cr13 is a martensitic stainless steel grade designed for applications requiring high hardness, excellent wear resistance, and moderate corrosion resistance. Supplied in rod and bar form, X46Cr13 stainless steel is widely used in engineering and industrial components where precision, durability, and mechanical performance are important. This grade conforms to the EN 10088-3 standard, which specifies technical delivery conditions for stainless steel rods, bars, and related long products for general purposes. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X46Cr13 stainless steel rods and bars. Our materials are sourced from approved mills and supplied in full compliance with EN 10088-3 specifications, ensuring consistent chemical composition, precise dimensions, controlled mechanical properties, and reliable performance. Forms of Supply: Round bar, hex bar, square bar, rectangular bar, flat bar, rod Explanation of Designation (X46Cr13): • X – High-alloy steel • 46 – Approx. 0.46% carbon content • Cr13 – Approx. 13% chromium Chemical Composition (% – typical limits): • Carbon (C): 0.43 – 0.50 • Chromium (Cr): 12.0 – 14.0 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 1.00 • Phosphorus (P): ≤ 0.040 • Sulphur (S): ≤ 0.015 • Nickel (Ni): ≤ 0.50 Mechanical Properties (Typical, depending on heat treatment): • Tensile Strength: 750 – 950 MPa • Yield Strength: ≥ 500 MPa • Elongation: 8 – 12% • Hardness: Can be significantly increased by quenching and tempering Key Features: • High-carbon martensitic stainless steel • Excellent hardness and wear resistance after heat treatment • Moderate corrosion resistance in mildly corrosive environments • Heat-treatable for improved strength and hardness • Suitable for precision shafts, spindles, pins, and mechanical components • Available in multiple bar and rod shapes Material Characteristics: EN 10088-3 X46Cr13 stainless steel rod and bar provides very high hardness, wear resistance, and mechanical strength. Its martensitic structure allows hardening by heat treatment, making it suitable for components subject to heavy mechanical stress, wear, and moderate corrosion conditions. Applications: • Shafts, spindles, and axles • Pump and valve components • Precision machine parts and mechanical components • Fasteners, studs, and pins • Industrial tools and mechanical assemblies • High-speed machined precision components Conclusion: Ladhani Metal Corporation supplies high-quality EN 10088-3 X46Cr13 stainless steel rods and bars in round, hex, square, rectangular, flat, and rod forms. With excellent hardness, wear resistance, and mechanical performance, X46Cr13 stainless steel is a reliable choice for industrial and engineering applications. For size availability or technical support, contact Ladhani Metal Corporation. #EN10088 #EN100883 #EN100883Steel #EN10088StainlessSteel #StainlessSteel #EuropeanStainlessSteel #ENStandardStainlessSteel #EN10088Supplier #EN10088Manufacturer #EN10088Stockist #EN10088Exporter #StainlessSteelBars #StainlessSteelRods #StainlessSteelWire #StainlessSteelBrightBar #SSRoundBar #SSFlatBar #SSHexBar #SSSquareBar #AusteniticStainlessSteel #FerriticStainlessSteel #MartensiticStainlessSteel #DuplexStainlessSteel #304StainlessSteel #304LStainlessSteel #316StainlessSteel #316LStainlessSteel #2205Duplex #StainlessSteelManufacturers #StainlessSteelSuppliers #StainlessSteelStockist #StainlessSteelExporters #IndianStainlessSteel #SSStockist #SSExporter #SteelIndustry #MetalIndustry #EngineeringSteel #IndustrialSteel #CorrosionResistantSteel #HighStrengthStainlessSteel #WeldableStainlessSteel #MachiningSteel #BrightBars #SteelBars #SteelRods #SteelWire #InfrastructureSteel #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar

EN 10088-3 X29CrS13 is a martensitic stainless steel grade designed for applications requiring very high hardness, good wear resistance, and moderate corrosion resistance. Supplied in rod and bar form, X29CrS13 stainless steel is widely used in engineering and industrial components where precision, durability, and mechanical performance are critical. This grade conforms to the EN 10088-3 standard, which specifies technical delivery conditions for stainless steel rods, bars, and related long products for general purposes. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X29CrS13 stainless steel rods and bars. Our materials are sourced from approved mills and supplied in full compliance with EN 10088-3 specifications, ensuring consistent chemical composition, precise dimensions, controlled mechanical properties, and reliable performance. Forms of Supply: Round bar, hex bar, square bar, rectangular bar, flat bar, rod Explanation of Designation (X29CrS13): • X – High-alloy steel • 29 – Approx. 0.29% carbon content • Cr13 – Approx. 13% chromium • S – Sulphur added for improved machinability Chemical Composition (% – typical limits): • Carbon (C): 0.26 – 0.32 • Chromium (Cr): 12.0 – 14.0 • Sulphur (S): 0.15 – 0.35 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 1.50 • Phosphorus (P): ≤ 0.040 • Nickel (Ni): ≤ 0.30 Mechanical Properties (Typical, depending on heat treatment): • Tensile Strength: 700 – 900 MPa • Yield Strength: ≥ 500 MPa • Elongation: 8 – 12% • Hardness: Can be significantly increased by quenching and tempering Key Features: • High-carbon martensitic stainless steel • Excellent hardness and wear resistance after heat treatment • Free-machining due to sulphur addition • Moderate corrosion resistance in mildly corrosive environments • Heat-treatable for improved strength and hardness • Suitable for precision-engineered shafts, pins, and mechanical components Material Characteristics: EN 10088-3 X29CrS13 stainless steel rod and bar combines very high hardness, wear resistance, and machinability. Its martensitic structure allows hardening by heat treatment, making it suitable for components subject to heavy mechanical stress, wear, and moderate corrosion conditions. Applications: • Shafts, spindles, and axles • Pump and valve components • Precision machine parts and mechanical components • Fasteners, studs, and pins • Industrial tools and mechanical assemblies • High-speed machined precision components Conclusion: Ladhani Metal Corporation supplies high-quality EN 10088-3 X29CrS13 stainless steel rods and bars in round, hex, square, rectangular, flat, and rod forms. With excellent hardness, wear resistance, and machinability, X29CrS13 stainless steel is a reliable choice for industrial and engineering applications. For size availability or technical support, contact Ladhani Metal Corporation. #EN10088 #EN100883 #EN100883Steel #EN10088StainlessSteel #StainlessSteel #EuropeanStainlessSteel #ENStandardStainlessSteel #EN10088Supplier #EN10088Manufacturer #EN10088Stockist #EN10088Exporter #StainlessSteelBars #StainlessSteelRods #StainlessSteelWire #StainlessSteelBrightBar #SSRoundBar #SSFlatBar #SSHexBar #SSSquareBar #AusteniticStainlessSteel #FerriticStainlessSteel #MartensiticStainlessSteel #DuplexStainlessSteel #304StainlessSteel #304LStainlessSteel #316StainlessSteel #316LStainlessSteel #2205Duplex #StainlessSteelManufacturers #StainlessSteelSuppliers #StainlessSteelStockist #StainlessSteelExporters #IndianStainlessSteel #SSStockist #SSExporter #SteelIndustry #MetalIndustry #EngineeringSteel #IndustrialSteel #CorrosionResistantSteel #HighStrengthStainlessSteel #WeldableStainlessSteel #MachiningSteel #BrightBars #SteelBars #SteelRods #SteelWire #InfrastructureSteel #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar

EN 10088-3 X15Cr13 is a martensitic stainless steel grade designed for applications requiring good corrosion resistance, high hardness, and moderate strength after heat treatment. Supplied in rod and bar form, X15Cr13 stainless steel is widely used in engineering and industrial components where wear resistance and mechanical performance are critical. This grade conforms to the EN 10088-3 standard, which specifies technical delivery conditions for stainless steel rods, bars, and related long products for general purposes. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X15Cr13 stainless steel rods and bars. Our materials are sourced from approved mills and supplied in full compliance with EN 10088-3 specifications, ensuring consistent chemical composition, precise dimensions, controlled mechanical properties, and reliable performance. Forms of Supply: Round bar, hex bar, square bar, rectangular bar, flat bar, rod Explanation of Designation (X15Cr13): • X – High-alloy steel • 15 – Approx. 0.15% carbon content • Cr13 – Approx. 13% chromium Chemical Composition (% – typical limits): • Carbon (C): 0.12 – 0.18 • Chromium (Cr): 12.0 – 14.0 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 1.00 • Phosphorus (P): ≤ 0.040 • Sulphur (S): ≤ 0.015 • Nickel (Ni): ≤ 0.50 Mechanical Properties (Typical, depending on heat treatment): • Tensile Strength: 600 – 800 MPa • Yield Strength: ≥ 400 MPa • Elongation: 10 – 13% • Hardness: Can be significantly increased by quenching and tempering Key Features: • Martensitic stainless steel with moderate corrosion resistance • Excellent hardness and wear resistance after heat treatment • Good machinability in annealed condition • Heat-treatable for higher strength and hardness • Suitable for shafts, spindles, and precision components • Available in multiple bar and rod shapes Material Characteristics: EN 10088-3 X15Cr13 stainless steel rod and bar combines high hardness, moderate strength, and corrosion resistance. Its martensitic structure allows hardening by heat treatment, making it suitable for components subject to wear, mechanical stress, and moderate corrosion environments. Applications: • Shafts, spindles, and axles • Pump and valve components • Machine parts and engineering components • Fasteners, studs, and pins • Industrial tools and mechanical assemblies • Precision-engineered components requiring hardness Conclusion: Ladhani Metal Corporation supplies high-quality EN 10088-3 X15Cr13 stainless steel rods and bars in round, hex, square, rectangular, flat, and rod forms. With excellent hardness, reliable mechanical properties, and moderate corrosion resistance, X15Cr13 stainless steel is a dependable choice for industrial and engineering applications. For size availability or technical support, contact Ladhani Metal Corporation. #EN10088 #EN100883 #EN100883Steel #EN10088StainlessSteel #StainlessSteel #EuropeanStainlessSteel #ENStandardStainlessSteel #EN10088Supplier #EN10088Manufacturer #EN10088Stockist #EN10088Exporter #StainlessSteelBars #StainlessSteelRods #StainlessSteelWire #StainlessSteelBrightBar #SSRoundBar #SSFlatBar #SSHexBar #SSSquareBar #AusteniticStainlessSteel #FerriticStainlessSteel #MartensiticStainlessSteel #DuplexStainlessSteel #304StainlessSteel #304LStainlessSteel #316StainlessSteel #316LStainlessSteel #2205Duplex #StainlessSteelManufacturers #StainlessSteelSuppliers #StainlessSteelStockist #StainlessSteelExporters #IndianStainlessSteel #SSStockist #SSExporter #SteelIndustry #MetalIndustry #EngineeringSteel #IndustrialSteel #CorrosionResistantSteel #HighStrengthStainlessSteel #WeldableStainlessSteel #MachiningSteel #BrightBars #SteelBars #SteelRods #SteelWire #InfrastructureSteel #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar

EN 10088-3 X6Cr17 is a martensitic stainless steel grade designed for applications requiring good corrosion resistance, moderate strength, and excellent hardness after heat treatment. Supplied in rod and bar form, X6Cr17 stainless steel is widely used in engineering and industrial components where wear resistance and mechanical performance are required. This grade conforms to the EN 10088-3 standard, which specifies technical delivery conditions for stainless steel rods, bars, and related long products for general purposes. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X6Cr17 stainless steel rods and bars. Our materials are sourced from approved mills and supplied in full compliance with EN 10088-3 specifications, ensuring consistent chemical composition, precise dimensions, controlled mechanical properties, and reliable performance. Forms of Supply: Round bar, hex bar, square bar, rectangular bar, flat bar, rod Explanation of Designation (X6Cr17): • X – High-alloy steel • 6 – Approx. 0.06% carbon content • Cr17 – Approx. 17% chromium Chemical Composition (% – typical limits): • Carbon (C): ≤ 0.08 • Chromium (Cr): 16.0 – 18.0 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 1.00 • Phosphorus (P): ≤ 0.040 • Sulphur (S): ≤ 0.015 • Nickel (Ni): ≤ 0.50 Mechanical Properties (Typical, depending on heat treatment): • Tensile Strength: 500 – 700 MPa • Yield Strength: ≥ 250 MPa • Elongation: 12 – 15% • Hardness: Can be increased significantly by quenching and tempering Key Features: • Martensitic stainless steel with moderate corrosion resistance • Excellent hardness and wear resistance after heat treatment • Good machinability in annealed condition • Heat-treatable for improved strength and hardness • Suitable for shafts, spindles, and precision components • Available in multiple bar and rod shapes Material Characteristics: EN 10088-3 X6Cr17 stainless steel rod and bar provides a practical balance of mechanical performance and corrosion resistance. Its martensitic structure allows hardening by heat treatment, making it suitable for components subject to wear, stress, and moderate corrosion environments. Applications: • Shafts, spindles, and axles • Pump and valve components • Machine parts and engineering components • Fasteners, studs, and pins • Industrial tools and mechanical assemblies • Precision-engineered components requiring hardness Conclusion: Ladhani Metal Corporation supplies high-quality EN 10088-3 X6Cr17 stainless steel rods and bars in round, hex, square, rectangular, flat, and rod forms. With reliable mechanical properties, moderate corrosion resistance, and heat-treatable performance, X6Cr17 stainless steel is a dependable choice for industrial and engineering applications. For size availability or technical support, contact Ladhani Metal Corporation #EN10088 #EN100883 #EN100883Steel #EN10088StainlessSteel #StainlessSteel #EuropeanStainlessSteel #ENStandardStainlessSteel #EN10088Supplier #EN10088Manufacturer #EN10088Stockist #EN10088Exporter #StainlessSteelBars #StainlessSteelRods #StainlessSteelWire #StainlessSteelBrightBar #SSRoundBar #SSFlatBar #SSHexBar #SSSquareBar #AusteniticStainlessSteel #FerriticStainlessSteel #MartensiticStainlessSteel #DuplexStainlessSteel #304StainlessSteel #304LStainlessSteel #316StainlessSteel #316LStainlessSteel #2205Duplex #StainlessSteelManufacturers #StainlessSteelSuppliers #StainlessSteelStockist #StainlessSteelExporters #IndianStainlessSteel #SSStockist #SSExporter #SteelIndustry #MetalIndustry #EngineeringSteel #IndustrialSteel #CorrosionResistantSteel #HighStrengthStainlessSteel #WeldableStainlessSteel #MachiningSteel #BrightBars #SteelBars #SteelRods #SteelWire #InfrastructureSteel #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar

EN 10088-3 X12CrS13 is a free-machining martensitic stainless steel grade designed for applications requiring good corrosion resistance, excellent machinability, and moderate mechanical strength. The controlled addition of sulphur significantly improves machinability, making this grade especially suitable for high-speed machining and mass-produced precision components. Supplied in rod and bar form, X12CrS13 stainless steel is widely used in engineering and industrial applications where dimensional accuracy and productivity are critical. This grade conforms to the EN 10088-3 standard, which specifies technical delivery conditions for stainless steel rods, bars, and related long products for general purposes. Ladhani Metal Corporation is a reliable manufacturer, supplier, and exporter of EN 10088-3 X12CrS13 stainless steel rods and bars. Our materials are sourced from approved mills and supplied in full compliance with EN 10088-3 specifications, ensuring consistent chemical composition, controlled mechanical properties, precise dimensions, and dependable performance. Forms of Supply: Round bar, hex bar, square bar, rectangular bar, flat bar, rod Explanation of Designation (X12CrS13): • X – High-alloy steel • 12 – Approx. 0.12% carbon content • Cr13 – Approx. 13% chromium • S – Sulphur added for improved machinability Chemical Composition (% – typical limits): • Carbon (C): 0.08 – 0.15 • Chromium (Cr): 12.0 – 14.0 • Sulphur (S): 0.15 – 0.35 • Silicon (Si): 0.20 – 1.00 • Manganese (Mn): ≤ 1.50 • Phosphorus (P): ≤ 0.040 • Nickel (Ni): ≤ 0.30 Mechanical Properties (Typical, depending on heat treatment): • Tensile Strength: 650 – 850 MPa • Yield Strength: ≥ 450 MPa • Elongation: 10 – 14% • Hardness: Can be increased by quenching and tempering Key Features: • Free-machining martensitic stainless steel • Excellent machinability due to sulphur addition • Moderate corrosion resistance in mildly corrosive environments • Heat-treatable for improved strength and hardness • Good dimensional stability during machining • Suitable for automatic and CNC machining operations Material Characteristics: EN 10088-3 X12CrS13 stainless steel rod and bar combines good mechanical strength, machinability, and moderate corrosion resistance. Its martensitic structure can be hardened by heat treatment, making it suitable for components subjected to mechanical stress, wear, and precision machining. Applications: • Shafts, spindles, and axles • Pump and valve components • Machine parts and engineering components • Fasteners, studs, and pins • Industrial tools and mechanical assemblies • High-speed machined precision components Conclusion: Ladhani Metal Corporation supplies high-quality EN 10088-3 X12CrS13 stainless steel rods and bars in round, hex, square, rectangular, flat, and rod forms. With excellent machinability, reliable mechanical properties, and moderate corrosion resistance, X12CrS13 stainless steel is a dependable choice for engineering and industrial applications. For size availability or technical support, contact Ladhani Metal Corporation. #EN10088 #EN100883 #EN100883Steel #EN10088StainlessSteel #StainlessSteel #EuropeanStainlessSteel #ENStandardStainlessSteel #EN10088Supplier #EN10088Manufacturer #EN10088Stockist #EN10088Exporter #StainlessSteelBars #StainlessSteelRods #StainlessSteelWire #StainlessSteelBrightBar #SSRoundBar #SSFlatBar #SSHexBar #SSSquareBar #AusteniticStainlessSteel #FerriticStainlessSteel #MartensiticStainlessSteel #DuplexStainlessSteel #304StainlessSteel #304LStainlessSteel #316StainlessSteel #316LStainlessSteel #2205Duplex #StainlessSteelManufacturers #StainlessSteelSuppliers #StainlessSteelStockist #StainlessSteelExporters #IndianStainlessSteel #SSStockist #SSExporter #SteelIndustry #MetalIndustry #EngineeringSteel #IndustrialSteel #CorrosionResistantSteel #HighStrengthStainlessSteel #WeldableStainlessSteel #MachiningSteel #BrightBars #SteelBars #SteelRods #SteelWire #InfrastructureSteel #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar

EN 10088-3 X6Cr13 is a martensitic stainless steel grade designed for applications requiring a balanced combination of corrosion resistance, moderate to high strength, good hardness, and excellent machinability after heat treatment. Supplied in rod and bar form, X6Cr13 stainless steel is widely used in engineering and industrial components where mechanical strength and wear resistance are required along with basic corrosion resistance. This grade conforms to the EN 10088-3 standard, which specifies technical delivery conditions for stainless steel semi-finished products, bars, rods, wire, sections, and bright products for general purposes. Ladhani Metal Corporation is a reliable manufacturer, supplier, and exporter of EN 10088-3 X6Cr13 stainless steel rods and bars. We supply materials sourced from approved mills, ensuring consistent chemical composition, controlled mechanical properties, dimensional accuracy, and compliance with EN 10088-3 requirements. Forms of Supply: Round bar, hex bar, square bar, rectangular bar, flat bar, rod Explanation of Designation (X6Cr13): • X – High-alloy steel • 6 – Approx. 0.06% carbon content • Cr13 – Approx. 13% chromium Chemical Composition (% – typical limits for X6Cr13): • Carbon (C): ≤ 0.08 • Chromium (Cr): 12.0 – 14.0 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 1.00 • Phosphorus (P): ≤ 0.040 • Sulphur (S): ≤ 0.015 Mechanical Properties (Typical, depending on heat treatment): • Tensile Strength: 650 – 800 MPa • Yield Strength: ≥ 450 MPa • Elongation: 12 – 15% • Hardness: Can be increased significantly by quenching and tempering Key Features: • Martensitic stainless steel with good strength and hardness • Moderate corrosion resistance in mildly corrosive environments • Good machinability in annealed condition • Heat-treatable to achieve higher hardness and wear resistance • Suitable for polished and ground bar applications • Available in multiple bar shapes including round, hex, square, and rectangular Material Characteristics: EN 10088-3 X6Cr13 stainless steel rod and bar offers a practical balance between corrosion resistance and mechanical performance. Its martensitic structure allows it to be hardened by heat treatment, making it suitable for components subjected to mechanical stress and wear while still providing resistance to atmospheric and mildly corrosive environments. Applications: • Shafts, spindles, and axles • Pump and valve components • Machine parts and engineering components • Fasteners, studs, and pins • Industrial tools and mechanical assemblies • Architectural and decorative applications (polished bars) Conclusion: Ladhani Metal Corporation supplies high-quality EN 10088-3 X6Cr13 stainless steel rods and bars in round, hex, square, and rectangular forms. With reliable mechanical properties, good corrosion resistance, and flexible heat treatment options, X6Cr13 stainless steel bar is a dependable choice for engineering and industrial applications. For size availability or technical support, contact Ladhani Metal Corporation. #EN10088 #EN100883 #EN100883Steel #EN10088StainlessSteel #StainlessSteel #EuropeanStainlessSteel #ENStandardStainlessSteel #EN10088Supplier #EN10088Manufacturer #EN10088Stockist #EN10088Exporter #StainlessSteelBars #StainlessSteelRods #StainlessSteelWire #StainlessSteelBrightBar #SSRoundBar #SSFlatBar #SSHexBar #SSSquareBar #AusteniticStainlessSteel #FerriticStainlessSteel #MartensiticStainlessSteel #DuplexStainlessSteel #304StainlessSteel #304LStainlessSteel #316StainlessSteel #316LStainlessSteel #2205Duplex #StainlessSteelManufacturers #StainlessSteelSuppliers #StainlessSteelStockist #StainlessSteelExporters #IndianStainlessSteel #SSStockist #SSExporter #SteelIndustry #MetalIndustry #EngineeringSteel #IndustrialSteel #CorrosionResistantSteel #HighStrengthStainlessSteel #WeldableStainlessSteel #MachiningSteel #BrightBars #SteelBars #SteelRods #SteelWire #InfrastructureSteel #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar

EN 10025-6 S960QL is an ultra-high-strength quenched and tempered fine-grain structural steel grade designed for applications requiring extreme yield strength, excellent toughness, and reliable performance under very high loads and demanding conditions. Supplied in plate, sheet, coil, and strip form, S960QL steel undergoes precise quenching and tempering heat treatment to achieve an exceptional combination of tensile strength, ductility, and impact toughness. This grade complies with the EN 10025-6 standard and is suitable for advanced engineering, structural, and offshore applications where maximum strength is required. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10025-6 S960QL steel plates, along with sheets, coils, and strips. Our materials are sourced from approved mills and supplied in full compliance with EN 10025-6 specifications, ensuring dimensional accuracy, consistent quality, and ultra-high-strength performance. Forms Available: plate, sheet, coil, strip Grades Available: S960QL Explanation of Designation: • S – Structural steel • 960 – Minimum yield strength in MPa • Q – Quenched • L – Thermo-mechanically treated with impact toughness at −40°C Chemical Composition (% – typical limits): • Carbon (C): ≤ 0.22 • Manganese (Mn): ≤ 1.60 • Phosphorus (P): ≤ 0.025 • Sulphur (S): ≤ 0.025 • Silicon (Si): ≤ 0.50 • Chromium (Cr): ≤ 0.30 • Nickel (Ni): ≤ 0.65 • Molybdenum (Mo): ≤ 0.25 • Vanadium (V): ≤ 0.12 Mechanical Properties (Typical, vary by thickness): • Tensile Strength: 1,050 – 1,150 MPa • Yield Strength: ≥ 960 MPa • Elongation: 9% (for thickness ≤ 16 mm) Key Features: • Ultra-high yield and tensile strength for extreme structural and engineering applications • Excellent low-temperature impact toughness at −40°C • Quenched and tempered for maximum strength, ductility, and toughness • Good weldability with controlled procedures • Stable mechanical properties across thickness ranges • Available in plate, sheet, coil, and strip forms Material Characteristics: S960QL steel plate combines extremely high strength with excellent toughness and formability. The quenched and tempered fine-grain structure ensures dependable mechanical performance under extreme static and dynamic loads, making it suitable for ultra-high-performance engineering, offshore, and structural applications. Applications: • Heavy structural steel fabrication • Bridges, cranes, and high-rise buildings • Machinery and heavy equipment manufacturing • Offshore platforms and structural components • Industrial plants and civil engineering projects Conclusion: Ladhani Metal Corporation supplies premium quality EN 10025-6 S960QL steel plates along with sheets, coils, and strips for ultra-high-strength structural applications. With exceptional mechanical performance, quenching and tempering treatment, and full compliance with EN 10025-6 standards, S960QL steel plate is a reliable and durable solution for demanding engineering, structural, and offshore requirements. For customized sizes, grade selection, or technical assistance, contact Ladhani Metal Corporation. #EN10025 #EN100256 #EN100256Steel #EN10025StructuralSteel #EN100256StructuralSteel #QuenchedAndTemperedSteel #HighStrengthStructuralSteel #S690QL #S690QL1 #S690QL2 #S890QL #S890QL1 #S960QL #StructuralSteelPlate #StructuralSteelSheet #StructuralSteelCoil #StructuralSteelStrip #CarbonStructuralSteel #EuropeanStructuralSteel #ConstructionSteel #SteelForConstruction #SteelForStructures #BridgeSteel #HeavyEngineeringSteel #CranesSteel #OffshoreSteel #BuildingSteel #EngineeringSteel #FabricationSteel #SteelPlates #SteelSheets #SteelCoils #SteelStrips #HotRolledSteel #QuenchedTemperedSteel #HighStrengthSteel #WeldableSteel #LowCarbonSteel #SteelManufacturers #SteelSuppliers #SteelExporters #IndianSteel #StructuralSteelSupplier #EN100256Supplier #EN100256Manufacturer #EN100256Exporter #SteelPlatesIndia #SteelSheetsIndia #MetalIndustry #IndustrialSteel #InfrastructureSteel #CivilEngineeringSteel #EuropeanSteelStandard #ENStandardSteel #SteelStockist #SteelTrading #EN100256SteelSupplier #EN100256SteelManufacturer #EN100256SteelExporter #LadhaniMetal #Mumbai #NaviMumbai #Thane #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Gandhidham #Delhi #Faridabad #Gurugram #Noida #Ghaziabad #Jaipur #Neemrana #Ludhiana #Jalandhar #Amritsar #Chandigarh #Kolkata #Howrah #Durgapur #Bokaro #Jamshedpur #Rourkela #Bhubaneswar #Visakhapatnam #Vijayawada #Hyderabad #Chennai #Coimbatore #Salem #Hosur #Bengaluru #Tumakuru #Belagavi #Hubballi #Mangaluru #Kochi #Ernakulam #Trivandrum #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Raipur #Bhilai #Bilaspur #Jabalpur #Ujjain #Kanpur #Lucknow #Varanasi #Prayagraj

EN 10025-6 S890QL1 is an ultra-high-strength quenched and tempered fine-grain structural steel grade designed for applications requiring exceptional yield strength, superior toughness, and reliable performance under extreme loads and low-temperature conditions. Supplied in sheet, plate, coil, and strip form, S890QL1 steel undergoes precise quenching and tempering heat treatment to achieve a superior combination of tensile strength, ductility, and impact toughness. This grade complies with the EN 10025-6 standard and is suitable for advanced structural, heavy engineering, and offshore applications. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10025-6 S890QL1 steel sheets, along with plates, coils, and strips. Our materials are sourced from approved mills and supplied in full compliance with EN 10025-6 specifications, ensuring dimensional accuracy, consistent quality, and reliable ultra-high-strength performance. Forms Available: plate, sheet, coil, strip Grades Available: S890QL1 Explanation of Designation: • S – Structural steel • 890 – Minimum yield strength in MPa • Q – Quenched • L1 – Thermo-mechanically treated with impact toughness at −60°C Chemical Composition (% – typical limits): • Carbon (C): ≤ 0.22 • Manganese (Mn): ≤ 1.60 • Phosphorus (P): ≤ 0.025 • Sulphur (S): ≤ 0.025 • Silicon (Si): ≤ 0.50 • Chromium (Cr): ≤ 0.30 • Nickel (Ni): ≤ 0.65 • Molybdenum (Mo): ≤ 0.25 • Vanadium (V): ≤ 0.12 Mechanical Properties (Typical, vary by thickness): • Tensile Strength: 940 – 1,050 MPa • Yield Strength: ≥ 890 MPa • Elongation: 10% (for thickness ≤ 16 mm) Key Features: • Ultra-high yield and tensile strength for extreme structural applications • Exceptional low-temperature impact toughness at −60°C • Quenched and tempered for optimized strength, ductility, and toughness • Good weldability with controlled procedures • Stable mechanical properties across thickness ranges • Available in sheet, plate, coil, and strip forms Material Characteristics: S890QL1 steel sheet combines ultra-high strength with superior low-temperature toughness. The quenched and tempered fine-grain structure ensures consistent mechanical performance under extreme static and dynamic loads, making it ideal for ultra-high-performance engineering, offshore, and structural applications. Applications: • Heavy structural steel fabrication • Bridges, cranes, and high-rise buildings • Machinery and heavy equipment manufacturing • Offshore platforms and structural components • Industrial plants and civil engineering projects Conclusion: Ladhani Metal Corporation supplies premium quality EN 10025-6 S890QL1 steel sheets along with plates, coils, and strips for ultra-high-strength structural applications. With outstanding mechanical performance, quenching and tempering treatment, and full compliance with EN 10025-6 standards, S890QL1 steel sheet is a reliable and durable solution for demanding engineering, structural, and offshore requirements. For customized sizes, grade selection, or technical assistance, contact Ladhani Metal Corporation. #EN10025 #EN100256 #EN100256Steel #EN10025StructuralSteel #EN100256StructuralSteel #QuenchedAndTemperedSteel #HighStrengthStructuralSteel #S690QL #S690QL1 #S690QL2 #S890QL #S890QL1 #S960QL #StructuralSteelPlate #StructuralSteelSheet #StructuralSteelCoil #StructuralSteelStrip #CarbonStructuralSteel #EuropeanStructuralSteel #ConstructionSteel #SteelForConstruction #SteelForStructures #BridgeSteel #HeavyEngineeringSteel #CranesSteel #OffshoreSteel #BuildingSteel #EngineeringSteel #FabricationSteel #SteelPlates #SteelSheets #SteelCoils #SteelStrips #HotRolledSteel #QuenchedTemperedSteel #HighStrengthSteel #WeldableSteel #LowCarbonSteel #SteelManufacturers #SteelSuppliers #SteelExporters #IndianSteel #StructuralSteelSupplier #EN100256Supplier #EN100256Manufacturer #EN100256Exporter #SteelPlatesIndia #SteelSheetsIndia #MetalIndustry #IndustrialSteel #InfrastructureSteel #CivilEngineeringSteel #EuropeanSteelStandard #ENStandardSteel #SteelStockist #SteelTrading #EN100256SteelSupplier #EN100256SteelManufacturer #EN100256SteelExporter #LadhaniMetal #Mumbai #NaviMumbai #Thane #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Gandhidham #Delhi #Faridabad #Gurugram #Noida #Ghaziabad #Jaipur #Neemrana #Ludhiana #Jalandhar #Amritsar #Chandigarh #Kolkata #Howrah #Durgapur #Bokaro #Jamshedpur #Rourkela #Bhubaneswar #Visakhapatnam #Vijayawada #Hyderabad #Chennai #Coimbatore #Salem #Hosur #Bengaluru #Tumakuru #Belagavi #Hubballi #Mangaluru #Kochi #Ernakulam #Trivandrum #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Raipur #Bhilai #Bilaspur #Jabalpur #Ujjain #Kanpur #Lucknow #Varanasi #Prayagraj

EN 10025-6 S890QL is an ultra-high-strength quenched and tempered fine-grain structural steel grade designed for applications requiring exceptional yield strength, high toughness, and reliable performance under extreme loads and demanding conditions. Supplied in strip, coil, plate, and sheet form, S890QL steel undergoes a precise quenching and tempering heat treatment to achieve a superior combination of tensile strength, ductility, and impact toughness. This grade complies with the EN 10025-6 standard and is suitable for advanced structural, heavy engineering, and offshore applications. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10025-6 S890QL steel strips, along with coils, plates, and sheets. Our materials are sourced from approved mills and supplied in full compliance with EN 10025-6 specifications, ensuring dimensional accuracy, consistent quality, and reliable ultra-high-strength performance. Forms Available: plate, sheet, coil, strip Grades Available: S890QL Explanation of Designation: • S – Structural steel • 890 – Minimum yield strength in MPa • Q – Quenched • L – Thermo-mechanically treated with impact toughness at −40°C Chemical Composition (% – typical limits): • Carbon (C): ≤ 0.22 • Manganese (Mn): ≤ 1.60 • Phosphorus (P): ≤ 0.025 • Sulphur (S): ≤ 0.025 • Silicon (Si): ≤ 0.50 • Chromium (Cr): ≤ 0.30 • Nickel (Ni): ≤ 0.65 • Molybdenum (Mo): ≤ 0.25 • Vanadium (V): ≤ 0.12 Mechanical Properties (Typical, vary by thickness): • Tensile Strength: 940 – 1,050 MPa • Yield Strength: ≥ 890 MPa • Elongation: 10% (for thickness ≤ 16 mm) Key Features: • Ultra-high yield and tensile strength for extreme structural applications • Excellent low-temperature impact toughness at −40°C • Quenched and tempered for optimized strength, ductility, and toughness • Good weldability with controlled procedures • Stable mechanical properties across thickness ranges • Available in strip, coil, plate, and sheet forms Material Characteristics: S890QL steel strip provides an exceptional combination of very high strength, toughness, and formability due to the quenching and tempering process. Its fine-grain structure ensures reliable performance under extreme static and dynamic loads, making it suitable for ultra-high-performance engineering and structural applications, including heavy machinery and offshore structures. Applications: • Heavy structural steel fabrication • Bridges, cranes, and high-rise buildings • Machinery and heavy equipment manufacturing • Offshore platforms and structural components • Industrial plants and civil engineering projects Conclusion: Ladhani Metal Corporation supplies premium quality EN 10025-6 S890QL steel strips along with plates, sheets, and coils for ultra-high-strength structural applications. With outstanding mechanical performance, quenching and tempering treatment, and full compliance with EN 10025-6 standards, S890QL steel strip is a reliable and durable solution for demanding engineering, structural, and offshore requirements. For customized sizes, grade selection, or technical assistance, contact Ladhani Metal Corporation. #EN10025 #EN100256 #EN100256Steel #EN10025StructuralSteel #EN100256StructuralSteel #QuenchedAndTemperedSteel #HighStrengthStructuralSteel #S690QL #S690QL1 #S690QL2 #S890QL #S890QL1 #S960QL #StructuralSteelPlate #StructuralSteelSheet #StructuralSteelCoil #StructuralSteelStrip #CarbonStructuralSteel #EuropeanStructuralSteel #ConstructionSteel #SteelForConstruction #SteelForStructures #BridgeSteel #HeavyEngineeringSteel #CranesSteel #OffshoreSteel #BuildingSteel #EngineeringSteel #FabricationSteel #SteelPlates #SteelSheets #SteelCoils #SteelStrips #HotRolledSteel #QuenchedTemperedSteel #HighStrengthSteel #WeldableSteel #LowCarbonSteel #SteelManufacturers #SteelSuppliers #SteelExporters #IndianSteel #StructuralSteelSupplier #EN100256Supplier #EN100256Manufacturer #EN100256Exporter #SteelPlatesIndia #SteelSheetsIndia #MetalIndustry #IndustrialSteel #InfrastructureSteel #CivilEngineeringSteel #EuropeanSteelStandard #ENStandardSteel #SteelStockist #SteelTrading #EN100256SteelSupplier #EN100256SteelManufacturer #EN100256SteelExporter #LadhaniMetal #Mumbai #NaviMumbai #Thane #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Gandhidham #Delhi #Faridabad #Gurugram #Noida #Ghaziabad #Jaipur #Neemrana #Ludhiana #Jalandhar #Amritsar #Chandigarh #Kolkata #Howrah #Durgapur #Bokaro #Jamshedpur #Rourkela #Bhubaneswar #Visakhapatnam #Vijayawada #Hyderabad #Chennai #Coimbatore #Salem #Hosur #Bengaluru #Tumakuru #Belagavi #Hubballi #Mangaluru #Kochi #Ernakulam #Trivandrum #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Raipur #Bhilai #Bilaspur #Jabalpur #Ujjain #Kanpur #Lucknow #Varanasi #Prayagraj

EN 10025-6 S690QL2 is a high-strength quenched and tempered fine-grain structural steel grade developed for applications requiring exceptional yield strength, superior toughness, and reliable performance under heavy and dynamic loads. Supplied in coil, plate, sheet, and strip form, S690QL2 steel undergoes a quenching and tempering heat treatment to achieve an optimized combination of strength, ductility, and impact toughness. This grade complies with the EN 10025-6 standard and is suitable for demanding structural and engineering applications requiring impact performance at −60°C. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10025-6 S690QL2 steel coils, along with plates, sheets, and strips. Our materials are sourced from approved mills and supplied in full compliance with EN 10025-6 specifications, ensuring dimensional accuracy, consistent quality, and reliable high-strength performance. Forms Available: plate, sheet, coil, strip Grades Available: S690QL2 Explanation of Designation: • S – Structural steel • 690 – Minimum yield strength in MPa • Q – Quenched • L2 – Thermo-mechanically treated with impact toughness at −60°C Chemical Composition (% – typical limits): • Carbon (C): ≤ 0.22 • Manganese (Mn): ≤ 1.60 • Phosphorus (P): ≤ 0.025 • Sulphur (S): ≤ 0.025 • Silicon (Si): ≤ 0.50 • Chromium (Cr): ≤ 0.30 • Nickel (Ni): ≤ 0.65 • Molybdenum (Mo): ≤ 0.25 • Vanadium (V): ≤ 0.12 Mechanical Properties (Typical, vary by thickness): • Tensile Strength: 740 – 900 MPa • Yield Strength: ≥ 690 MPa • Elongation: 12% (for thickness ≤ 16 mm) Key Features: • Very high yield and tensile strength for heavy-duty and high-performance applications • Exceptional low-temperature impact toughness at −60°C • Quenched and tempered for optimal strength, ductility, and toughness • Good weldability with controlled procedures • Stable mechanical properties across thickness ranges • Available in coil, plate, sheet, and strip forms Material Characteristics: S690QL2 steel coil combines extremely high strength with superior low-temperature toughness. The quenched and tempered fine-grain structure ensures consistent mechanical performance under heavy static and dynamic loads, making it suitable for advanced engineering, offshore, and structural applications in extreme conditions. Applications: • Heavy structural steel fabrication • Bridges and high-rise buildings • Cranes, machinery, and heavy equipment • Offshore and onshore structural components • Industrial plants and civil engineering projects Conclusion: Ladhani Metal Corporation supplies premium quality EN 10025-6 S690QL2 steel coils along with plates, sheets, and strips for demanding high-strength and low-temperature structural applications. With exceptional mechanical performance, quenching and tempering treatment, and full compliance with EN 10025-6 standards, S690QL2 steel coil is a reliable and durable solution for extreme engineering and structural requirements. For customized sizes, grade selection, or technical assistance, contact Ladhani Metal Corporation. #EN10025 #EN100256 #EN100256Steel #EN10025StructuralSteel #EN100256StructuralSteel #QuenchedAndTemperedSteel #HighStrengthStructuralSteel #S690QL #S690QL1 #S690QL2 #S890QL #S890QL1 #S960QL #StructuralSteelPlate #StructuralSteelSheet #StructuralSteelCoil #StructuralSteelStrip #CarbonStructuralSteel #EuropeanStructuralSteel #ConstructionSteel #SteelForConstruction #SteelForStructures #BridgeSteel #HeavyEngineeringSteel #CranesSteel #OffshoreSteel #BuildingSteel #EngineeringSteel #FabricationSteel #SteelPlates #SteelSheets #SteelCoils #SteelStrips #HotRolledSteel #QuenchedTemperedSteel #HighStrengthSteel #WeldableSteel #LowCarbonSteel #SteelManufacturers #SteelSuppliers #SteelExporters #IndianSteel #StructuralSteelSupplier #EN100256Supplier #EN100256Manufacturer #EN100256Exporter #SteelPlatesIndia #SteelSheetsIndia #MetalIndustry #IndustrialSteel #InfrastructureSteel #CivilEngineeringSteel #EuropeanSteelStandard #ENStandardSteel #SteelStockist #SteelTrading #EN100256SteelSupplier #EN100256SteelManufacturer #EN100256SteelExporter #LadhaniMetal #Mumbai #NaviMumbai #Thane #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Gandhidham #Delhi #Faridabad #Gurugram #Noida #Ghaziabad #Jaipur #Neemrana #Ludhiana #Jalandhar #Amritsar #Chandigarh #Kolkata #Howrah #Durgapur #Bokaro #Jamshedpur #Rourkela #Bhubaneswar #Visakhapatnam #Vijayawada #Hyderabad #Chennai #Coimbatore #Salem #Hosur #Bengaluru #Tumakuru #Belagavi #Hubballi #Mangaluru #Kochi #Ernakulam #Trivandrum #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Raipur #Bhilai #Bilaspur #Jabalpur #Ujjain #Kanpur #Lucknow #Varanasi #Prayagraj

EN 10025-6 S690QL1 is a high-strength quenched and tempered fine-grain structural steel grade developed for applications requiring exceptional yield strength, excellent toughness, and reliable performance under heavy and dynamic loads. Supplied in plate, sheet, coil, and strip form, S690QL1 steel undergoes a quenching and tempering heat treatment to achieve superior mechanical properties, including high strength, good ductility, and impact toughness. This grade complies with the EN 10025-6 standard and is suitable for demanding structural and engineering applications. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10025-6 S690QL1 steel plates, along with sheets, coils, and strips. Our materials are sourced from approved mills and supplied in full compliance with EN 10025-6 specifications, ensuring dimensional accuracy, uniform quality, and reliable high-strength performance. Forms Available: plate, sheet, coil, strip Grades Available: S690QL1 Explanation of Designation: • S – Structural steel • 690 – Minimum yield strength in MPa • Q – Quenched • L1 – Thermo-mechanically treated with impact toughness at −40°C Chemical Composition (% – typical limits): • Carbon (C): ≤ 0.22 • Manganese (Mn): ≤ 1.60 • Phosphorus (P): ≤ 0.025 • Sulphur (S): ≤ 0.025 • Silicon (Si): ≤ 0.50 • Chromium (Cr): ≤ 0.30 • Nickel (Ni): ≤ 0.65 • Molybdenum (Mo): ≤ 0.25 • Vanadium (V): ≤ 0.12 Mechanical Properties (Typical, vary by thickness): • Tensile Strength: 740 – 900 MPa • Yield Strength: ≥ 690 MPa • Elongation: 12% (for thickness ≤ 16 mm) Key Features: • Very high yield and tensile strength for heavy-duty and high-performance applications • Excellent impact toughness at −40°C • Quenched and tempered for optimized strength, ductility, and toughness • Good weldability with controlled procedures • Stable mechanical properties across thickness ranges • Available in plate, sheet, coil, and strip forms Material Characteristics: S690QL1 steel plate offers a superior combination of high strength, low-temperature toughness, and formability due to the quenching and tempering process. Its fine-grain structure ensures dependable performance under heavy static and dynamic loads, making it ideal for advanced engineering and structural applications. Applications: • Heavy structural steel fabrication • Bridges and high-rise buildings • Cranes, machinery, and heavy equipment • Offshore and onshore structural components • Industrial plants and civil engineering projects Conclusion: Ladhani Metal Corporation supplies premium quality EN 10025-6 S690QL1 steel plates along with sheets, coils, and strips for demanding high-strength structural applications. With excellent low-temperature toughness, quenching and tempering treatment, and full compliance with EN 10025-6 standards, S690QL1 steel plate is a reliable and cost-effective solution for heavy-duty engineering and structural requirements. For customized sizes, grade selection, or technical assistance, contact Ladhani Metal Corporation. #EN10025 #EN100256 #EN100256Steel #EN10025StructuralSteel #EN100256StructuralSteel #QuenchedAndTemperedSteel #HighStrengthStructuralSteel #S690QL #S690QL1 #S690QL2 #S890QL #S890QL1 #S960QL #StructuralSteelPlate #StructuralSteelSheet #StructuralSteelCoil #StructuralSteelStrip #CarbonStructuralSteel #EuropeanStructuralSteel #ConstructionSteel #SteelForConstruction #SteelForStructures #BridgeSteel #HeavyEngineeringSteel #CranesSteel #OffshoreSteel #BuildingSteel #EngineeringSteel #FabricationSteel #SteelPlates #SteelSheets #SteelCoils #SteelStrips #HotRolledSteel #QuenchedTemperedSteel #HighStrengthSteel #WeldableSteel #LowCarbonSteel #SteelManufacturers #SteelSuppliers #SteelExporters #IndianSteel #StructuralSteelSupplier #EN100256Supplier #EN100256Manufacturer #EN100256Exporter #SteelPlatesIndia #SteelSheetsIndia #MetalIndustry #IndustrialSteel #InfrastructureSteel #CivilEngineeringSteel #EuropeanSteelStandard #ENStandardSteel #SteelStockist #SteelTrading #EN100256SteelSupplier #EN100256SteelManufacturer #EN100256SteelExporter #LadhaniMetal #Mumbai #NaviMumbai #Thane #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Gandhidham #Delhi #Faridabad #Gurugram #Noida #Ghaziabad #Jaipur #Neemrana #Ludhiana #Jalandhar #Amritsar #Chandigarh #Kolkata #Howrah #Durgapur #Bokaro #Jamshedpur #Rourkela #Bhubaneswar #Visakhapatnam #Vijayawada #Hyderabad #Chennai #Coimbatore #Salem #Hosur #Bengaluru #Tumakuru #Belagavi #Hubballi #Mangaluru #Kochi #Ernakulam #Trivandrum #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Raipur #Bhilai #Bilaspur #Jabalpur #Ujjain #Kanpur #Lucknow #Varanasi #Prayagraj