Products

EN 10088-3 X3CrNiMoN27-5-2 is a high-alloy austenitic stainless steel grade with elevated chromium and nitrogen content, designed for applications requiring exceptional corrosion resistance, high strength, and excellent resistance to pitting and crevice corrosion. The addition of molybdenum and nitrogen significantly enhances performance in aggressive and chloride-rich environments while improving mechanical strength. Supplied in rod form, X3CrNiMoN27-5-2 stainless steel is suitable for demanding industrial, chemical, and marine applications. This grade conforms to the EN 10088-3 standard for stainless steel long products. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X3CrNiMoN27-5-2 stainless steel rods. All materials are sourced from approved mills and supplied in compliance with EN 10088-3 requirements, ensuring consistent chemical composition, stable mechanical properties, and precise dimensional accuracy. Forms of Supply: Round bar, hex bar, square bar, rectangular bar, flat bar, rod Explanation of Designation (X3CrNiMoN27-5-2): • X – High-alloy steel • 3 – Approx. 0.03% carbon content • Cr27 – Approx. 27% chromium • Ni5 – Approx. 5% nickel • Mo2 – Approx. 2% molybdenum • N – Nitrogen alloyed for increased strength and corrosion resistance Chemical Composition (% – typical limits): • Carbon (C): ≤ 0.04 • Chromium (Cr): 26.0 – 28.0 • Nickel (Ni): 4.0 – 6.0 • Molybdenum (Mo): 1.5 – 2.5 • Nitrogen (N): 0.20 – 0.35 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 2.00 • Phosphorus (P): ≤ 0.045 • Sulphur (S): ≤ 0.015 Mechanical Properties (Typical, solution annealed): • Tensile Strength: 650 – 900 MPa • Yield Strength: ≥ 350 MPa • Elongation: ≥ 30% • Hardness: Typically ≤ 240 HB Key Features: • High-chromium, nitrogen-alloyed stainless steel • Excellent resistance to pitting, crevice corrosion, and stress corrosion cracking • High mechanical strength due to nitrogen strengthening • Good toughness and ductility • Good weldability with controlled procedures • Non-magnetic in annealed condition Material Characteristics: EN 10088-3 X3CrNiMoN27-5-2 stainless steel rod combines very high corrosion resistance with enhanced mechanical strength. Its alloying design ensures reliable performance in highly aggressive service environments while maintaining good formability and toughness. Applications: • Chemical and petrochemical processing equipment • Marine and offshore components • Desalination plants and seawater systems • Pressure-containing parts • Structural components in corrosive environments Conclusion: Ladhani Metal Corporation supplies premium-quality EN 10088-3 X3CrNiMoN27-5-2 stainless steel rods in round, hex, square, rectangular, flat, and rod forms. With exceptional corrosion resistance, nitrogen-enhanced strength, and full EN 10088-3 compliance, X3CrNiMoN27-5-2 stainless steel rod is an excellent choice for demanding industrial and engineering applications. #EN10088 #EN100883 #EN100883Steel #EN10088StainlessSteel #StainlessSteel #EuropeanStainlessSteel #ENStandardStainlessSteel #EN10088Supplier #EN10088Manufacturer #EN10088Stockist #EN10088Exporter #StainlessSteelBars #StainlessSteelRods #StainlessSteelWire #StainlessSteelBrightBar #SSRoundBar #SSFlatBar #SSHexBar #SSSquareBar #AusteniticStainlessSteel #FerriticStainlessSteel #MartensiticStainlessSteel #DuplexStainlessSteel #304StainlessSteel #304LStainlessSteel #316StainlessSteel #316LStainlessSteel #2205Duplex #StainlessSteelManufacturers #StainlessSteelSuppliers #StainlessSteelStockist #StainlessSteelExporters #IndianStainlessSteel #SSStockist #SSExporter #SteelIndustry #MetalIndustry #EngineeringSteel #IndustrialSteel #CorrosionResistantSteel #HighStrengthStainlessSteel #WeldableStainlessSteel #MachiningSteel #BrightBars #SteelBars #SteelRods #SteelWire #InfrastructureSteel #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar

EN 10088-3 X2CrNiMo18-15-4 is a high-alloy austenitic stainless steel grade engineered for applications requiring excellent corrosion resistance, high toughness, and superior resistance to pitting and crevice corrosion. The increased molybdenum content enhances performance in chloride-rich and aggressive environments, while balanced chromium and nickel levels ensure a stable austenitic structure and good formability. Supplied in bar form, X2CrNiMo18-15-4 stainless steel is widely used in critical industrial, chemical, and marine applications. This grade conforms to the EN 10088-3 standard, which specifies technical delivery conditions for stainless steel long products. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X2CrNiMo18-15-4 stainless steel bars. Our materials are sourced from approved mills and supplied in full compliance with EN 10088-3 requirements, ensuring consistent chemical composition, dependable mechanical properties, and precise dimensional accuracy. Forms of Supply: Round bar, hex bar, square bar, rectangular bar, flat bar, rod Explanation of Designation (X2CrNiMo18-15-4): • X – High-alloy steel • 2 – Approx. 0.02% carbon content • Cr18 – Approx. 18% chromium • Ni15 – Approx. 15% nickel • Mo4 – Approx. 4% molybdenum Chemical Composition (% – typical limits): • Carbon (C): ≤ 0.03 • Chromium (Cr): 17.0 – 19.0 • Nickel (Ni): 14.0 – 16.0 • Molybdenum (Mo): 3.5 – 4.5 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 2.00 • Phosphorus (P): ≤ 0.045 • Sulphur (S): ≤ 0.015 Mechanical Properties (Typical, solution annealed): • Tensile Strength: 550 – 750 MPa • Yield Strength: ≥ 220 MPa • Elongation: ≥ 35% • Hardness: Typically ≤ 230 HB Key Features: • Austenitic stainless steel with high molybdenum content • Excellent resistance to pitting and crevice corrosion • High toughness and ductility over a wide temperature range • Very good weldability and formability • Non-magnetic in annealed condition • Suitable for severe corrosive environments Material Characteristics: EN 10088-3 X2CrNiMo18-15-4 stainless steel bar offers a robust combination of corrosion resistance, toughness, and fabrication flexibility. Its high molybdenum content ensures superior performance in aggressive chemical and marine environments while maintaining excellent mechanical stability and workability. Applications: • Chemical and petrochemical processing equipment • Marine and offshore components • Heat exchangers and pressure vessels • Industrial piping systems and fittings • Structural components exposed to corrosive media Conclusion: Ladhani Metal Corporation supplies premium-quality EN 10088-3 X2CrNiMo18-15-4 stainless steel bars in round, hex, square, rectangular, flat, and rod forms. With excellent corrosion resistance, high toughness, and reliable mechanical performance, X2CrNiMo18-15-4 stainless steel bar is a dependable solution for demanding industrial, chemical, and marine applications. For size availability, technical specifications, or customized requirements, contact Ladhani Metal Corporation. #EN10088 #EN100883 #EN100883Steel #EN10088StainlessSteel #StainlessSteel #EuropeanStainlessSteel #ENStandardStainlessSteel #EN10088Supplier #EN10088Manufacturer #EN10088Stockist #EN10088Exporter #StainlessSteelBars #StainlessSteelRods #StainlessSteelWire #StainlessSteelBrightBar #SSRoundBar #SSFlatBar #SSHexBar #SSSquareBar #AusteniticStainlessSteel #FerriticStainlessSteel #MartensiticStainlessSteel #DuplexStainlessSteel #304StainlessSteel #304LStainlessSteel #316StainlessSteel #316LStainlessSteel #2205Duplex #StainlessSteelManufacturers #StainlessSteelSuppliers #StainlessSteelStockist #StainlessSteelExporters #IndianStainlessSteel #SSStockist #SSExporter #SteelIndustry #MetalIndustry #EngineeringSteel #IndustrialSteel #CorrosionResistantSteel #HighStrengthStainlessSteel #WeldableStainlessSteel #MachiningSteel #BrightBars #SteelBars #SteelRods #SteelWire #InfrastructureSteel #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar

EN 10088-3 X2CrNiMo18-14-3 is a high-alloy austenitic stainless steel grade developed for applications requiring excellent corrosion resistance, high toughness, and reliable performance in aggressive environments. With increased chromium, nickel, and molybdenum content, this grade offers strong resistance to pitting and crevice corrosion, particularly in chloride-containing media. Supplied in rod form, X2CrNiMo18-14-3 stainless steel is suitable for critical industrial, chemical, and marine applications. This grade conforms to the EN 10088-3 standard for stainless steel long products. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X2CrNiMo18-14-3 stainless steel rods. Our products are sourced from approved mills and supplied in compliance with EN 10088-3 requirements, ensuring consistent chemical composition, dependable mechanical properties, and precise dimensional accuracy. Forms of Supply: Round bar, hex bar, square bar, rectangular bar, flat bar, rod Explanation of Designation (X2CrNiMo18-14-3): • X – High-alloy steel • 2 – Approx. 0.02% carbon content • Cr18 – Approx. 18% chromium • Ni14 – Approx. 14% nickel • Mo3 – Approx. 3% molybdenum Chemical Composition (% – typical limits): • Carbon (C): ≤ 0.03 • Chromium (Cr): 17.0 – 19.0 • Nickel (Ni): 13.0 – 15.0 • Molybdenum (Mo): 2.5 – 3.5 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 2.00 • Phosphorus (P): ≤ 0.045 • Sulphur (S): ≤ 0.015 Mechanical Properties (Typical, solution annealed): • Tensile Strength: 550 – 750 MPa • Yield Strength: ≥ 220 MPa • Elongation: ≥ 35% • Hardness: Typically ≤ 230 HB Key Features: • Austenitic stainless steel with high chromium and molybdenum content • Excellent resistance to pitting and crevice corrosion • High toughness and ductility over a wide temperature range • Very good weldability and formability • Non-magnetic in annealed condition • Suitable for severe corrosive environments Material Characteristics: EN 10088-3 X2CrNiMo18-14-3 stainless steel rod provides a robust combination of corrosion resistance, toughness, and fabrication flexibility. Its alloy composition ensures stable performance in aggressive chemical and marine conditions while maintaining excellent mechanical integrity. Applications: • Chemical and petrochemical processing equipment • Marine and offshore components • Heat exchangers and pressure vessels • Industrial piping systems and fittings • Structural components in corrosive environments Conclusion: Ladhani Metal Corporation supplies premium-quality EN 10088-3 X2CrNiMo18-14-3 stainless steel rods in round, hex, square, rectangular, flat, and rod forms. With excellent corrosion resistance, strong mechanical properties, and full EN 10088-3 compliance, X2CrNiMo18-14-3 stainless steel rod is a reliable solution for demanding industrial and engineering applications. #EN10088 #EN100883 #EN100883Steel #EN10088StainlessSteel #StainlessSteel #EuropeanStainlessSteel #ENStandardStainlessSteel #EN10088Supplier #EN10088Manufacturer #EN10088Stockist #EN10088Exporter #StainlessSteelBars #StainlessSteelRods #StainlessSteelWire #StainlessSteelBrightBar #SSRoundBar #SSFlatBar #SSHexBar #SSSquareBar #AusteniticStainlessSteel #FerriticStainlessSteel #MartensiticStainlessSteel #DuplexStainlessSteel #304StainlessSteel #304LStainlessSteel #316StainlessSteel #316LStainlessSteel #2205Duplex #StainlessSteelManufacturers #StainlessSteelSuppliers #StainlessSteelStockist #StainlessSteelExporters #IndianStainlessSteel #SSStockist #SSExporter #SteelIndustry #MetalIndustry #EngineeringSteel #IndustrialSteel #CorrosionResistantSteel #HighStrengthStainlessSteel #WeldableStainlessSteel #MachiningSteel #BrightBars #SteelBars #SteelRods #SteelWire #InfrastructureSteel #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar

EN 10088-3 X2CrNiMoN17-13-3 is a nitrogen-alloyed austenitic stainless steel grade designed for applications requiring excellent corrosion resistance, high mechanical strength, and superior resistance to pitting and crevice corrosion. The combined addition of molybdenum and nitrogen enhances performance in chloride-bearing and aggressive environments while maintaining excellent toughness and ductility. Supplied in bar form, X2CrNiMoN17-13-3 stainless steel is widely used in chemical, marine, and heavy industrial applications where durability and long service life are essential. This grade conforms to the EN 10088-3 standard for stainless steel long products. Ladhani Metal Corporation is a reliable manufacturer, supplier, and exporter of EN 10088-3 X2CrNiMoN17-13-3 stainless steel bars. All materials are sourced from approved mills and supplied in full compliance with EN 10088-3 requirements, ensuring consistent chemical composition, stable mechanical properties, and precise dimensional accuracy. Forms of Supply: Round bar, hex bar, square bar, rectangular bar, flat bar, rod Explanation of Designation (X2CrNiMoN17-13-3): • X – High-alloy steel • 2 – Approx. 0.02% carbon content • Cr17 – Approx. 17% chromium • Ni13 – Approx. 13% nickel • Mo3 – Approx. 3% molybdenum • N – Nitrogen alloyed for enhanced strength and corrosion resistance Chemical Composition (% – typical limits): • Carbon (C): ≤ 0.03 • Chromium (Cr): 16.0 – 18.0 • Nickel (Ni): 12.0 – 14.0 • Molybdenum (Mo): 2.5 – 3.5 • Nitrogen (N): 0.10 – 0.25 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 2.00 • Phosphorus (P): ≤ 0.045 • Sulphur (S): ≤ 0.015 Mechanical Properties (Typical, solution annealed): • Tensile Strength: 650 – 900 MPa • Yield Strength: ≥ 320 MPa • Elongation: ≥ 35% • Hardness: Typically ≤ 240 HB Key Features: • Nitrogen-alloyed austenitic stainless steel • Excellent resistance to pitting and crevice corrosion • Higher strength than conventional austenitic grades • Excellent toughness and ductility • Very good weldability using standard procedures • Non-magnetic in annealed condition Material Characteristics: EN 10088-3 X2CrNiMoN17-13-3 stainless steel bar offers an excellent balance of corrosion resistance and mechanical strength. Nitrogen strengthening combined with molybdenum alloying ensures reliable performance in aggressive service environments while maintaining good formability and toughness. Applications: • Chemical and petrochemical processing equipment • Marine and offshore structures • Pressure vessels and heat exchangers • Industrial piping systems and fittings • Structural and load-bearing components Conclusion: Ladhani Metal Corporation supplies premium-quality EN 10088-3 X2CrNiMoN17-13-3 stainless steel bars in round, hex, square, rectangular, flat, and rod forms. With superior corrosion resistance, nitrogen-enhanced strength, and full EN 10088-3 compliance, X2CrNiMoN17-13-3 stainless steel bar is a dependable choice for demanding industrial and engineering applications. #EN10088 #EN100883 #EN100883Steel #EN10088StainlessSteel #StainlessSteel #EuropeanStainlessSteel #ENStandardStainlessSteel #EN10088Supplier #EN10088Manufacturer #EN10088Stockist #EN10088Exporter #StainlessSteelBars #StainlessSteelRods #StainlessSteelWire #StainlessSteelBrightBar #SSRoundBar #SSFlatBar #SSHexBar #SSSquareBar #AusteniticStainlessSteel #FerriticStainlessSteel #MartensiticStainlessSteel #DuplexStainlessSteel #304StainlessSteel #304LStainlessSteel #316StainlessSteel #316LStainlessSteel #2205Duplex #StainlessSteelManufacturers #StainlessSteelSuppliers #StainlessSteelStockist #StainlessSteelExporters #IndianStainlessSteel #SSStockist #SSExporter #SteelIndustry #MetalIndustry #EngineeringSteel #IndustrialSteel #CorrosionResistantSteel #HighStrengthStainlessSteel #WeldableStainlessSteel #MachiningSteel #BrightBars #SteelBars #SteelRods #SteelWire #InfrastructureSteel #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar

EN 10088-3 X38CrMo14 is a martensitic stainless steel grade alloyed with chromium and molybdenum, developed for applications requiring high strength, good wear resistance, and improved corrosion resistance compared to standard martensitic steels. The molybdenum addition enhances hardenability and resistance to pitting and crevice corrosion, while the martensitic structure allows the material to be heat treated to achieve high hardness and strength. Supplied in rod form, X38CrMo14 stainless steel is widely used in engineering and industrial components where mechanical performance and durability are critical. This grade complies with the EN 10088-3 standard for stainless steel long products. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X38CrMo14 stainless steel rods. Our materials are sourced from approved mills and supplied in accordance with EN 10088-3 requirements, ensuring consistent chemical composition, reliable mechanical properties, and precise dimensional accuracy. Forms of Supply: Round bar, hex bar, square bar, rectangular bar, flat bar, rod Explanation of Designation (X38CrMo14): • X – High-alloy steel • 38 – Approx. 0.38% carbon content • Cr14 – Approx. 14% chromium • Mo – Molybdenum alloyed for improved hardenability and corrosion resistance Chemical Composition (% – typical limits): • Carbon (C): 0.36 – 0.42 • Chromium (Cr): 13.0 – 14.5 • Molybdenum (Mo): 0.50 – 0.80 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 1.00 • Phosphorus (P): ≤ 0.040 • Sulphur (S): ≤ 0.015 Mechanical Properties (Typical, quenched and tempered): • Tensile Strength: 900 – 1,100 MPa • Yield Strength: ≥ 700 MPa • Elongation: 10 – 14% • Hardness: Approx. 280 – 340 HB (depending on heat treatment) Key Features: • Martensitic stainless steel with high strength • Good wear and abrasion resistance • Improved corrosion resistance due to molybdenum • Heat-treatable to achieve high hardness • Good dimensional stability after heat treatment • Suitable for high-stress applications Material Characteristics: EN 10088-3 X38CrMo14 stainless steel rod provides a strong combination of strength, wear resistance, and corrosion performance. Its martensitic structure and molybdenum alloying allow reliable performance in demanding mechanical environments where durability and load-bearing capability are essential. Applications: • Shafts, spindles, and axles • Valve components and pump parts • Tooling and mechanical components • Industrial machinery parts • Wear-resistant engineering components Conclusion: Ladhani Metal Corporation supplies premium-quality EN 10088-3 X38CrMo14 stainless steel rods in round, hex, square, rectangular, flat, and rod forms. With high strength, good wear resistance, and reliable corrosion performance, X38CrMo14 stainless steel rod is a dependable choice for demanding engineering and industrial applications. #EN10088 #EN100883 #EN100883Steel #EN10088StainlessSteel #StainlessSteel #EuropeanStainlessSteel #ENStandardStainlessSteel #EN10088Supplier #EN10088Manufacturer #EN10088Stockist #EN10088Exporter #StainlessSteelBars #StainlessSteelRods #StainlessSteelWire #StainlessSteelBrightBar #SSRoundBar #SSFlatBar #SSHexBar #SSSquareBar #AusteniticStainlessSteel #FerriticStainlessSteel #MartensiticStainlessSteel #DuplexStainlessSteel #304StainlessSteel #304LStainlessSteel #316StainlessSteel #316LStainlessSteel #2205Duplex #StainlessSteelManufacturers #StainlessSteelSuppliers #StainlessSteelStockist #StainlessSteelExporters #IndianStainlessSteel #SSStockist #SSExporter #SteelIndustry #MetalIndustry #EngineeringSteel #IndustrialSteel #CorrosionResistantSteel #HighStrengthStainlessSteel #WeldableStainlessSteel #MachiningSteel #BrightBars #SteelBars #SteelRods #SteelWire #InfrastructureSteel #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar

EN 10088-3 X2CrNiMoV13-5-2 is a martensitic stainless steel grade alloyed with nickel, molybdenum, and vanadium, developed for applications requiring high strength, good toughness, and improved corrosion resistance compared to conventional martensitic steels. The addition of vanadium refines the grain structure and enhances wear resistance, while nickel improves toughness and molybdenum increases resistance to localized corrosion. Supplied in bar form, X2CrNiMoV13-5-2 stainless steel is widely used in high-performance engineering and industrial components. This grade conforms to the EN 10088-3 standard for stainless steel long products. Ladhani Metal Corporation is a reliable manufacturer, supplier, and exporter of EN 10088-3 X2CrNiMoV13-5-2 stainless steel bars. Our materials are sourced from approved mills and supplied in full compliance with EN 10088-3 requirements, ensuring consistent chemical composition, stable mechanical properties, and precise dimensional accuracy. Forms of Supply: Round bar, hex bar, square bar, rectangular bar, flat bar, rod Explanation of Designation (X2CrNiMoV13-5-2): • X – High-alloy steel • 2 – Approx. 0.02% carbon content • Cr13 – Approx. 13% chromium • Ni5 – Approx. 5% nickel • Mo2 – Approx. 2% molybdenum • V – Vanadium alloyed for grain refinement and wear resistance Chemical Composition (% – typical limits): • Carbon (C): ≤ 0.03 • Chromium (Cr): 12.0 – 14.0 • Nickel (Ni): 4.0 – 6.0 • Molybdenum (Mo): 1.5 – 2.5 • Vanadium (V): 0.10 – 0.30 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 1.00 • Phosphorus (P): ≤ 0.040 • Sulphur (S): ≤ 0.015 Mechanical Properties (Typical, quenched and tempered): • Tensile Strength: 850 – 1,050 MPa • Yield Strength: ≥ 650 MPa • Elongation: 12 – 15% • Hardness: Approx. 260 – 320 HB (depending on heat treatment) Key Features: • High-strength martensitic stainless steel • Good toughness due to nickel addition • Improved wear resistance from vanadium • Better corrosion resistance than standard martensitic grades • Heat-treatable for tailored mechanical properties • Suitable for demanding mechanical applications Material Characteristics: EN 10088-3 X2CrNiMoV13-5-2 stainless steel bar offers an excellent balance of strength, toughness, and corrosion resistance. Its alloying elements and martensitic structure allow it to perform reliably under high mechanical loads and dynamic stresses while maintaining reasonable corrosion performance. Applications: • Turbine and power generation components • Shafts, spindles, and high-stress machine parts • Oil and gas equipment • Engineering and industrial components • Wear-resistant mechanical parts Conclusion: Ladhani Metal Corporation supplies high-quality EN 10088-3 X2CrNiMoV13-5-2 stainless steel bars in round, hex, square, rectangular, flat, and rod forms. With high strength, good toughness, and reliable corrosion resistance, X2CrNiMoV13-5-2 stainless steel bar is a dependable choice for advanced engineering and industrial applications. #EN10088 #EN100883 #EN100883Steel #EN10088StainlessSteel #StainlessSteel #EuropeanStainlessSteel #ENStandardStainlessSteel #EN10088Supplier #EN10088Manufacturer #EN10088Stockist #EN10088Exporter #StainlessSteelBars #StainlessSteelRods #StainlessSteelWire #StainlessSteelBrightBar #SSRoundBar #SSFlatBar #SSHexBar #SSSquareBar #AusteniticStainlessSteel #FerriticStainlessSteel #MartensiticStainlessSteel #DuplexStainlessSteel #304StainlessSteel #304LStainlessSteel #316StainlessSteel #316LStainlessSteel #2205Duplex #StainlessSteelManufacturers #StainlessSteelSuppliers #StainlessSteelStockist #StainlessSteelExporters #IndianStainlessSteel #SSStockist #SSExporter #SteelIndustry #MetalIndustry #EngineeringSteel #IndustrialSteel #CorrosionResistantSteel #HighStrengthStainlessSteel #WeldableStainlessSteel #MachiningSteel #BrightBars #SteelBars #SteelRods #SteelWire #InfrastructureSteel #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar

EN 10088-3 X2CrNiMoN17-11-2 is a nitrogen-alloyed austenitic stainless steel grade developed for applications requiring enhanced strength, excellent corrosion resistance, and good resistance to pitting and crevice corrosion. The combined addition of molybdenum and nitrogen improves performance in chloride-containing and aggressive environments while maintaining good toughness and ductility. Supplied in rod form, X2CrNiMoN17-11-2 stainless steel is suitable for demanding industrial, marine, and chemical applications. This grade conforms to the EN 10088-3 standard for stainless steel long products. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X2CrNiMoN17-11-2 stainless steel rods. Materials are sourced from approved mills and supplied in accordance with EN 10088-3 requirements, ensuring consistent chemistry, controlled mechanical properties, and precise dimensional tolerances. Forms of Supply: Round bar, hex bar, square bar, rectangular bar, flat bar, rod Explanation of Designation (X2CrNiMoN17-11-2): • X – High-alloy steel • 2 – Approx. 0.02% carbon content • Cr17 – Approx. 17% chromium • Ni11 – Approx. 11% nickel • Mo2 – Approx. 2% molybdenum • N – Nitrogen alloyed for increased strength and corrosion resistance Chemical Composition (% – typical limits): • Carbon (C): ≤ 0.03 • Chromium (Cr): 16.0 – 18.0 • Nickel (Ni): 10.0 – 12.0 • Molybdenum (Mo): 2.0 – 2.5 • Nitrogen (N): 0.10 – 0.22 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 2.00 • Phosphorus (P): ≤ 0.045 • Sulphur (S): ≤ 0.015 Mechanical Properties (Typical, solution annealed): • Tensile Strength: 600 – 850 MPa • Yield Strength: ≥ 300 MPa • Elongation: ≥ 35% • Hardness: Typically ≤ 230 HB Key Features: • Nitrogen-alloyed austenitic stainless steel • Improved strength compared to conventional austenitic grades • Excellent resistance to pitting and crevice corrosion • Good toughness and ductility • Very good weldability with standard procedures • Non-magnetic in annealed condition Material Characteristics: EN 10088-3 X2CrNiMoN17-11-2 stainless steel rod combines high corrosion resistance with enhanced mechanical strength due to nitrogen alloying. The molybdenum content further improves resistance to localized corrosion, making this grade suitable for severe service environments while retaining good formability and toughness. Applications: • Chemical and petrochemical equipment • Marine and offshore components • Pressure-containing parts • Industrial piping systems and fittings • Structural and load-bearing components Conclusion: Ladhani Metal Corporation supplies premium-quality EN 10088-3 X2CrNiMoN17-11-2 stainless steel rods in round, hex, square, rectangular, flat, and rod forms. With excellent corrosion resistance, nitrogen-enhanced strength, and full EN 10088-3 compliance, X2CrNiMoN17-11-2 stainless steel rod is a dependable solution for demanding industrial and engineering applications. #EN10088 #EN100883 #EN100883Steel #EN10088StainlessSteel #StainlessSteel #EuropeanStainlessSteel #ENStandardStainlessSteel #EN10088Supplier #EN10088Manufacturer #EN10088Stockist #EN10088Exporter #StainlessSteelBars #StainlessSteelRods #StainlessSteelWire #StainlessSteelBrightBar #SSRoundBar #SSFlatBar #SSHexBar #SSSquareBar #AusteniticStainlessSteel #FerriticStainlessSteel #MartensiticStainlessSteel #DuplexStainlessSteel #304StainlessSteel #304LStainlessSteel #316StainlessSteel #316LStainlessSteel #2205Duplex #StainlessSteelManufacturers #StainlessSteelSuppliers #StainlessSteelStockist #StainlessSteelExporters #IndianStainlessSteel #SSStockist #SSExporter #SteelIndustry #MetalIndustry #EngineeringSteel #IndustrialSteel #CorrosionResistantSteel #HighStrengthStainlessSteel #WeldableStainlessSteel #MachiningSteel #BrightBars #SteelBars #SteelRods #SteelWire #InfrastructureSteel #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar

EN 10088-3 X5CrNiMo17-12-2 is an austenitic stainless steel grade alloyed with molybdenum, designed for applications requiring excellent corrosion resistance, good mechanical strength, and high toughness. The presence of molybdenum significantly improves resistance to pitting and crevice corrosion, especially in chloride-containing environments. Supplied in bar form, X5CrNiMo17-12-2 stainless steel is widely used in chemical, marine, and industrial applications where reliability and corrosion performance are critical. This grade complies with the EN 10088-3 standard, covering technical delivery conditions for stainless steel long products. Ladhani Metal Corporation is a dependable manufacturer, supplier, and exporter of EN 10088-3 X5CrNiMo17-12-2 stainless steel bars. Our products are sourced from approved mills and supplied in full compliance with EN 10088-3 requirements, ensuring consistent quality, accurate dimensions, and stable mechanical properties. Forms of Supply: Round bar, hex bar, square bar, rectangular bar, flat bar, rod Explanation of Designation (X5CrNiMo17-12-2): • X – High-alloy steel • 5 – Approx. 0.05% carbon content • Cr17 – Approx. 17% chromium • Ni12 – Approx. 12% nickel • Mo2 – Approx. 2% molybdenum Chemical Composition (% – typical limits): • Carbon (C): ≤ 0.07 • Chromium (Cr): 16.5 – 18.5 • Nickel (Ni): 10.0 – 13.0 • Molybdenum (Mo): 2.0 – 2.5 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 2.00 • Phosphorus (P): ≤ 0.045 • Sulphur (S): ≤ 0.015 Mechanical Properties (Typical, solution annealed): • Tensile Strength: 500 – 700 MPa • Yield Strength: ≥ 200 MPa • Elongation: ≥ 40% • Hardness: Typically ≤ 215 HB Key Features: • Austenitic stainless steel with molybdenum addition • Excellent resistance to pitting and crevice corrosion • Good toughness and ductility at low and high temperatures • Very good weldability and formability • Non-magnetic in annealed condition • Suitable for aggressive and chloride-rich environments Material Characteristics: EN 10088-3 X5CrNiMo17-12-2 stainless steel bar provides a reliable combination of corrosion resistance, mechanical strength, and fabrication flexibility. Its molybdenum-enhanced chemistry ensures superior performance in harsh chemical and marine conditions while maintaining excellent toughness and weldability. Applications: • Chemical processing equipment • Marine and offshore components • Heat exchangers and pressure vessels • Pharmaceutical and food processing equipment • Industrial piping systems and fittings Conclusion: Ladhani Metal Corporation supplies high-quality EN 10088-3 X5CrNiMo17-12-2 stainless steel bars in round, hex, square, rectangular, flat, and rod forms. With excellent corrosion resistance, strong mechanical performance, and full EN 10088-3 compliance, X5CrNiMo17-12-2 stainless steel bar is a trusted solution for demanding industrial applications. #EN10088 #EN100883 #EN100883Steel #EN10088StainlessSteel #StainlessSteel #EuropeanStainlessSteel #ENStandardStainlessSteel #EN10088Supplier #EN10088Manufacturer #EN10088Stockist #EN10088Exporter #StainlessSteelBars #StainlessSteelRods #StainlessSteelWire #StainlessSteelBrightBar #SSRoundBar #SSFlatBar #SSHexBar #SSSquareBar #AusteniticStainlessSteel #FerriticStainlessSteel #MartensiticStainlessSteel #DuplexStainlessSteel #304StainlessSteel #304LStainlessSteel #316StainlessSteel #316LStainlessSteel #2205Duplex #StainlessSteelManufacturers #StainlessSteelSuppliers #StainlessSteelStockist #StainlessSteelExporters #IndianStainlessSteel #SSStockist #SSExporter #SteelIndustry #MetalIndustry #EngineeringSteel #IndustrialSteel #CorrosionResistantSteel #HighStrengthStainlessSteel #WeldableStainlessSteel #MachiningSteel #BrightBars #SteelBars #SteelRods #SteelWire #InfrastructureSteel #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar

EN 10088-3 X2CrNiN23-4 is a high-alloy austenitic stainless steel grade characterized by high chromium content, nitrogen alloying, and very low carbon levels. This composition provides excellent resistance to general corrosion, improved pitting resistance compared to standard austenitic grades, and enhanced mechanical strength due to nitrogen strengthening. Supplied in rod form, X2CrNiN23-4 stainless steel is suitable for demanding industrial and engineering applications where corrosion resistance, strength, and structural stability are essential. This grade conforms to the EN 10088-3 standard, which specifies technical delivery conditions for stainless steel long products for general purposes. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X2CrNiN23-4 stainless steel rods. All materials are sourced from approved mills and supplied in accordance with EN 10088-3 requirements, ensuring consistent chemical composition, controlled mechanical properties, and accurate dimensional tolerances. Forms of Supply: Round bar, hex bar, square bar, rectangular bar, flat bar, rod Explanation of Designation (X2CrNiN23-4): • X – High-alloy steel • 2 – Approx. 0.02% carbon content • Cr23 – Approx. 23% chromium • Ni4 – Approx. 4% nickel • N – Nitrogen alloyed for increased strength and corrosion resistance Chemical Composition (% – typical limits): • Carbon (C): ≤ 0.03 • Chromium (Cr): 22.0 – 24.0 • Nickel (Ni): 3.0 – 5.0 • Nitrogen (N): 0.10 – 0.25 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 2.00 • Phosphorus (P): ≤ 0.045 • Sulphur (S): ≤ 0.015 Mechanical Properties (Typical, solution annealed): • Tensile Strength: 600 – 800 MPa • Yield Strength: ≥ 300 MPa • Elongation: ≥ 35% • Hardness: Typically ≤ 240 HB Key Features: • High-chromium austenitic stainless steel • Nitrogen-enhanced strength and pitting resistance • Excellent resistance to general and localized corrosion • Good toughness and ductility • Good weldability with appropriate procedures • Non-magnetic in annealed condition Material Characteristics: EN 10088-3 X2CrNiN23-4 stainless steel rod offers a combination of high corrosion resistance and improved mechanical strength compared to conventional austenitic grades. Nitrogen alloying enhances structural stability while maintaining good formability and toughness, making this grade suitable for demanding service environments. Applications: • Chemical processing equipment • Pressure-containing components • Structural and load-bearing parts • Marine and offshore applications • Industrial machinery and fabricated components Conclusion: Ladhani Metal Corporation supplies premium-quality EN 10088-3 X2CrNiN23-4 stainless steel rods in round, hex, square, rectangular, flat, and rod forms. With high chromium content, nitrogen strengthening, and reliable corrosion resistance, X2CrNiN23-4 stainless steel rod is an excellent choice for advanced industrial and engineering applications. #EN10088 #EN100883 #EN100883Steel #EN10088StainlessSteel #StainlessSteel #EuropeanStainlessSteel #ENStandardStainlessSteel #EN10088Supplier #EN10088Manufacturer #EN10088Stockist #EN10088Exporter #StainlessSteelBars #StainlessSteelRods #StainlessSteelWire #StainlessSteelBrightBar #SSRoundBar #SSFlatBar #SSHexBar #SSSquareBar #AusteniticStainlessSteel #FerriticStainlessSteel #MartensiticStainlessSteel #DuplexStainlessSteel #304StainlessSteel #304LStainlessSteel #316StainlessSteel #316LStainlessSteel #2205Duplex #StainlessSteelManufacturers #StainlessSteelSuppliers #StainlessSteelStockist #StainlessSteelExporters #IndianStainlessSteel #SSStockist #SSExporter #SteelIndustry #MetalIndustry #EngineeringSteel #IndustrialSteel #CorrosionResistantSteel #HighStrengthStainlessSteel #WeldableStainlessSteel #MachiningSteel #BrightBars #SteelBars #SteelRods #SteelWire #InfrastructureSteel #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar

EN 10088-3 X9CrNi18-9 is an austenitic stainless steel grade offering good corrosion resistance, reliable mechanical strength, and excellent formability. With a balanced chromium–nickel composition, this grade provides good resistance to oxidation and general corrosive environments while maintaining good toughness over a wide temperature range. Supplied in bar and rod form, X9CrNi18-9 stainless steel is suitable for general engineering and industrial applications where consistent performance and ease of fabrication are required. This grade conforms to the EN 10088-3 standard, which specifies technical delivery conditions for stainless steel long products for general purposes. Ladhani Metal Corporation is a dependable manufacturer, supplier, and exporter of EN 10088-3 X9CrNi18-9 stainless steel bars and rods. All materials are sourced from approved mills and supplied in full compliance with EN 10088-3 requirements, ensuring consistent chemical composition, mechanical properties, and dimensional accuracy. Forms of Supply: Round bar, hex bar, square bar, rectangular bar, flat bar, rod Explanation of Designation (X9CrNi18-9): • X – High-alloy steel • 9 – Approx. 0.09% carbon content • Cr18 – Approx. 18% chromium • Ni9 – Approx. 9% nickel Chemical Composition (% – typical limits): • Carbon (C): ≤ 0.10 • Chromium (Cr): 17.0 – 19.0 • Nickel (Ni): 8.0 – 10.0 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 2.00 • Phosphorus (P): ≤ 0.045 • Sulphur (S): ≤ 0.030 Mechanical Properties (Typical, solution annealed): • Tensile Strength: 520 – 750 MPa • Yield Strength: ≥ 210 MPa • Elongation: ≥ 40% • Hardness: Typically ≤ 220 HB Key Features: • Austenitic stainless steel with balanced Cr–Ni content • Good general corrosion and oxidation resistance • Excellent formability and weldability • Good toughness at low and elevated temperatures • Non-magnetic in annealed condition Material Characteristics: EN 10088-3 X9CrNi18-9 stainless steel bar and rod provides a reliable combination of corrosion resistance, strength, and workability, making it suitable for a wide range of fabricated and machined components. Applications: • General engineering components • Shafts, fasteners, and machined parts • Chemical and process equipment • Food processing and handling machinery • Architectural and industrial fabrications Conclusion: Ladhani Metal Corporation supplies high-quality EN 10088-3 X9CrNi18-9 stainless steel bars and rods in round, hex, square, rectangular, flat, and rod forms. With dependable corrosion resistance and excellent fabrication characteristics, X9CrNi18-9 stainless steel bar is a practical choice for diverse industrial and engineering applications. #EN10088 #EN100883 #EN100883Steel #EN10088StainlessSteel #StainlessSteel #EuropeanStainlessSteel #ENStandardStainlessSteel #EN10088Supplier #EN10088Manufacturer #EN10088Stockist #EN10088Exporter #StainlessSteelBars #StainlessSteelRods #StainlessSteelWire #StainlessSteelBrightBar #SSRoundBar #SSFlatBar #SSHexBar #SSSquareBar #AusteniticStainlessSteel #FerriticStainlessSteel #MartensiticStainlessSteel #DuplexStainlessSteel #304StainlessSteel #304LStainlessSteel #316StainlessSteel #316LStainlessSteel #2205Duplex #StainlessSteelManufacturers #StainlessSteelSuppliers #StainlessSteelStockist #StainlessSteelExporters #IndianStainlessSteel #SSStockist #SSExporter #SteelIndustry #MetalIndustry #EngineeringSteel #IndustrialSteel #CorrosionResistantSteel #HighStrengthStainlessSteel #WeldableStainlessSteel #MachiningSteel #BrightBars #SteelBars #SteelRods #SteelWire #InfrastructureSteel #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar

EN 10088-3 X5CrNiN19-9 is a nitrogen-alloyed austenitic stainless steel grade designed for applications requiring improved strength, excellent corrosion resistance, and good weldability. The controlled nitrogen addition increases yield strength and enhances resistance to pitting corrosion while maintaining good ductility and toughness. Supplied in rod and bar form, X5CrNiN19-9 stainless steel is suitable for structural, engineering, and industrial applications where higher mechanical performance than standard austenitic grades is required. This grade conforms to the EN 10088-3 standard, which specifies technical delivery conditions for stainless steel long products for general purposes. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X5CrNiN19-9 stainless steel rods and bars. All materials are sourced from approved mills and supplied in full compliance with EN 10088-3 specifications, ensuring consistent chemical composition, reliable mechanical properties, and precise dimensional accuracy. Forms of Supply: Round bar, hex bar, square bar, rectangular bar, flat bar, rod Explanation of Designation (X5CrNiN19-9): • X – High-alloy steel • 5 – Approx. 0.05% carbon content • Cr19 – Approx. 19% chromium • Ni9 – Approx. 9% nickel • N – Nitrogen addition for enhanced strength and corrosion resistance Chemical Composition (% – typical limits): • Carbon (C): ≤ 0.07 • Chromium (Cr): 18.0 – 20.0 • Nickel (Ni): 8.0 – 10.0 • Nitrogen (N): 0.10 – 0.20 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 2.00 • Phosphorus (P): ≤ 0.045 • Sulphur (S): ≤ 0.015 Mechanical Properties (Typical, solution annealed): • Tensile Strength: 550 – 780 MPa • Yield Strength: ≥ 280 MPa • Elongation: ≥ 40% • Hardness: Typically ≤ 220 HB Key Features: • Nitrogen-alloyed austenitic stainless steel • Higher strength than conventional 18-8 grades • Excellent corrosion and pitting resistance • Good weldability and formability • Non-magnetic in annealed condition • Suitable for structural and pressure applications Material Characteristics: EN 10088-3 X5CrNiN19-9 stainless steel rod and bar combines enhanced mechanical strength with excellent corrosion resistance. Its nitrogen-strengthened austenitic structure ensures reliable performance in demanding service environments. Applications: • Structural and load-bearing components • Pressure vessels and piping systems • Chemical and petrochemical equipment • Food processing and pharmaceutical machinery • General engineering and industrial fabrication Conclusion: Ladhani Metal Corporation supplies premium quality EN 10088-3 X5CrNiN19-9 stainless steel rods and bars in round, hex, square, rectangular, flat, and rod forms. With improved strength, excellent corrosion resistance, and dependable weldability, X5CrNiN19-9 stainless steel rod is a reliable choice for advanced engineering and industrial applications. For size availability or technical support, contact Ladhani Metal Corporation. #EN10088 #EN100883 #EN100883Steel #EN10088StainlessSteel #StainlessSteel #EuropeanStainlessSteel #ENStandardStainlessSteel #EN10088Supplier #EN10088Manufacturer #EN10088Stockist #EN10088Exporter #StainlessSteelBars #StainlessSteelRods #StainlessSteelWire #StainlessSteelBrightBar #SSRoundBar #SSFlatBar #SSHexBar #SSSquareBar #AusteniticStainlessSteel #FerriticStainlessSteel #MartensiticStainlessSteel #DuplexStainlessSteel #304StainlessSteel #304LStainlessSteel #316StainlessSteel #316LStainlessSteel #2205Duplex #StainlessSteelManufacturers #StainlessSteelSuppliers #StainlessSteelStockist #StainlessSteelExporters #IndianStainlessSteel #SSStockist #SSExporter #SteelIndustry #MetalIndustry #EngineeringSteel #IndustrialSteel #CorrosionResistantSteel #HighStrengthStainlessSteel #WeldableStainlessSteel #MachiningSteel #BrightBars #SteelBars #SteelRods #SteelWire #InfrastructureSteel #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar

EN 10088-3 X2CrNiN18-10 is a nitrogen-alloyed austenitic stainless steel grade developed for applications requiring excellent corrosion resistance, improved strength, and good weldability. The controlled nitrogen addition enhances yield strength and resistance to pitting corrosion while maintaining good ductility and toughness. Supplied in bar and rod form, X2CrNiN18-10 stainless steel is widely used in structural, engineering, and industrial applications. This grade conforms to the EN 10088-3 standard, which specifies technical delivery conditions for stainless steel long products for general purposes. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X2CrNiN18-10 stainless steel rods and bars. All materials are sourced from approved mills and supplied in full compliance with EN 10088-3 specifications, ensuring consistent chemical composition, reliable mechanical properties, and precise dimensional accuracy. Forms of Supply: Round bar, hex bar, square bar, rectangular bar, flat bar, rod Explanation of Designation (X2CrNiN18-10): • X – High-alloy steel • 2 – Approx. 0.02% carbon content • Cr18 – Approx. 18% chromium • Ni10 – Approx. 10% nickel • N – Nitrogen addition for enhanced strength and corrosion resistance Chemical Composition (% – typical limits): • Carbon (C): ≤ 0.03 • Chromium (Cr): 17.0 – 19.0 • Nickel (Ni): 9.0 – 11.0 • Nitrogen (N): 0.10 – 0.20 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 2.00 • Phosphorus (P): ≤ 0.045 • Sulphur (S): ≤ 0.015 Mechanical Properties (Typical, solution annealed): • Tensile Strength: 550 – 750 MPa • Yield Strength: ≥ 280 MPa • Elongation: ≥ 40% • Hardness: Typically ≤ 220 HB Key Features: • Nitrogen-alloyed austenitic stainless steel • Higher strength compared to standard X2CrNi18-9 • Excellent corrosion and pitting resistance • Good weldability with reduced risk of intergranular corrosion • Non-magnetic in annealed condition • Suitable for structural and load-bearing applications Material Characteristics: EN 10088-3 X2CrNiN18-10 stainless steel rod and bar offers an excellent combination of strength, corrosion resistance, and ductility. The nitrogen-enhanced austenitic structure ensures superior mechanical performance without sacrificing corrosion resistance. Applications: • Structural and load-bearing components • Chemical and petrochemical equipment • Pressure vessels and piping systems • Food processing and pharmaceutical industries • General engineering and industrial fabrication Conclusion: Ladhani Metal Corporation supplies high-quality EN 10088-3 X2CrNiN18-10 stainless steel rods and bars in round, hex, square, rectangular, flat, and rod forms. With enhanced strength, excellent corrosion resistance, and reliable weldability, X2CrNiN18-10 stainless steel bar is a dependable choice for demanding engineering and industrial applications. For size availability or technical support, contact Ladhani Metal Corporation. #EN10088 #EN100883 #EN100883Steel #EN10088StainlessSteel #StainlessSteel #EuropeanStainlessSteel #ENStandardStainlessSteel #EN10088Supplier #EN10088Manufacturer #EN10088Stockist #EN10088Exporter #StainlessSteelBars #StainlessSteelRods #StainlessSteelWire #StainlessSteelBrightBar #SSRoundBar #SSFlatBar #SSHexBar #SSSquareBar #AusteniticStainlessSteel #FerriticStainlessSteel #MartensiticStainlessSteel #DuplexStainlessSteel #304StainlessSteel #304LStainlessSteel #316StainlessSteel #316LStainlessSteel #2205Duplex #StainlessSteelManufacturers #StainlessSteelSuppliers #StainlessSteelStockist #StainlessSteelExporters #IndianStainlessSteel #SSStockist #SSExporter #SteelIndustry #MetalIndustry #EngineeringSteel #IndustrialSteel #CorrosionResistantSteel #HighStrengthStainlessSteel #WeldableStainlessSteel #MachiningSteel #BrightBars #SteelBars #SteelRods #SteelWire #InfrastructureSteel #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar