Products

EN 10084 18NiCr5-4 is a nickel-chromium alloy carburizing steel grade developed for components requiring a hard, wear-resistant surface with a strong and tough core after carburizing and heat treatment. With approximately 0.18% carbon along with nickel and chromium additions, this grade offers excellent hardenability, improved fatigue strength, and superior impact resistance, making it suitable for highly stressed mechanical components. Manufactured in accordance with EN 10084, which specifies technical delivery conditions for steels intended for carburizing treatment, 18NiCr5-4 steel is widely used in automotive, heavy engineering, and transmission industries. Nickel enhances core toughness and resistance to shock loading, while chromium improves wear resistance and depth of hardening, ensuring reliable mechanical performance after quenching and tempering. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10084 18NiCr5-4 round bars, supplied with mill test certificates and strict quality inspection as per European standards. Forms of Supply (as per grade): Hot rolled round bars, Black round bars, Bright round bars, Peeled bars, Turned bars, Ground bars, Forged round bars Explanation of Designation (18NiCr5-4): • 18 – Approx. 0.18% carbon content • Ni – Nickel alloyed steel • Cr – Chromium alloyed steel • 5-4 – Alloy content classification (nickel and chromium levels) Chemical Composition (% – typical limits): • Carbon (C): 0.16 – 0.21 • Manganese (Mn): 0.50 – 0.80 • Silicon (Si): ≤ 0.40 • Nickel (Ni): 1.00 – 1.40 • Chromium (Cr): 0.80 – 1.10 • Phosphorus (P): ≤ 0.025 • Sulphur (S): ≤ 0.035 Mechanical Properties (Core, typical normalized condition): • Tensile Strength: 850 – 1050 MPa • Yield Strength: ≥ 600 MPa • Elongation: ≥ 9% • Hardness (Core): 230 – 300 HB After carburizing and quenching, the surface hardness can reach approximately 58 – 62 HRC, depending on case depth and heat treatment conditions. Key Features: • Excellent carburizing response • Superior core toughness due to nickel content • Good hardenability and wear resistance • High fatigue strength under dynamic loads • Suitable for heavy-duty case hardened components Material Characteristics: EN 10084 18NiCr5-4 round bars combine deep case hardening capability with enhanced core strength and ductility. The higher nickel content improves impact resistance, while chromium ensures uniform hardness distribution and wear resistance after carburizing and quenching. Applications: • Heavy-duty gears and gear shafts • Transmission and differential components • Drive shafts and pinions • Automotive drivetrain parts • Industrial machinery components requiring case hardening • Components subjected to high cyclic stresses Conclusion: Ladhani Metal Corporation supplies high-quality EN 10084 18NiCr5-4 round bars in various diameters and finishes. With reliable hardenability, excellent fatigue resistance, and strong core toughness, 18NiCr5-4 steel is widely used in demanding automotive and engineering applications. For stock availability, customized sizes, or technical specifications, contact Ladhani Metal Corporation. #EN10084 #EN10084Steel #EN10084Bars #EN10084CarburizingSteel #EN10084CaseHardeningSteel #ENStandardSteel #AlloySteel #CaseHardeningSteel #CarburizingSteel #C10E #C15E #C16E #16MnCr5 #20MnCr5 #18CrNiMo76 #17Cr3 #20MnCrS5 #EngineeringSteelBars #AlloySteelBars #AlloySteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #GearSteel #PinionSteel #ShaftSteel #TransmissionSteel #HeatTreatableSteel #CaseHardenedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #AlloySteelSupplier #EN10084Supplier #EN10084Manufacturer #EN10084Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Bengaluru #Hyderabad #Ahmedabad #Pune #Surat #Jaipur #Lucknow #Kanpur #Nagpur #Indore #Thane #Bhopal #Visakhapatnam #Patna #Vadodara #Ghaziabad #Ludhiana #Coimbatore #Agra #Madurai #Nashik #Faridabad #Meerut #Rajkot #Varanasi #Srinagar #Aurangabad #Dhanbad #Amritsar #NaviMumbai #Allahabad #Ranchi #Howrah #Jabalpur #Gwalior #Vijayawada #Jodhpur #Raipur #Kota #Guwahati #Chandigarh #Solapur #Hubli #Mysuru #Tiruchirappalli #Bareilly

EN 10084 10NiCr5-4 is a low carbon nickel-chromium alloy carburizing steel grade designed for components requiring a very hard, wear-resistant surface with a tough and high-strength core after carburizing and heat treatment. With approximately 0.10% carbon along with significant nickel and chromium additions, this grade provides excellent hardenability, superior core toughness, and high fatigue strength, making it suitable for heavily loaded mechanical parts. Manufactured in accordance with EN 10084, which specifies technical delivery conditions for steels intended for carburizing treatment, 10NiCr5-4 steel is widely used in automotive, heavy-duty transmission, and engineering industries. Nickel enhances core toughness and impact resistance, while chromium improves wear resistance and case hardening depth, ensuring reliable performance under dynamic loading conditions. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10084 10NiCr5-4 round bars, supplied with mill test certificates and strict quality inspection as per European standards. Forms of Supply (as per grade): Hot rolled round bars, Black round bars, Bright round bars, Peeled bars, Turned bars, Ground bars, Forged round bars Explanation of Designation (10NiCr5-4): • 10 – Approx. 0.10% carbon content • Ni – Nickel alloyed steel • Cr – Chromium alloyed steel • 5-4 – Alloy content classification (nickel and chromium levels) Chemical Composition (% – typical limits): • Carbon (C): 0.08 – 0.13 • Manganese (Mn): 0.50 – 0.80 • Silicon (Si): ≤ 0.40 • Nickel (Ni): 1.00 – 1.40 • Chromium (Cr): 0.80 – 1.10 • Phosphorus (P): ≤ 0.025 • Sulphur (S): ≤ 0.035 Mechanical Properties (Core, typical normalized condition): • Tensile Strength: 800 – 1000 MPa • Yield Strength: ≥ 550 MPa • Elongation: ≥ 10% • Hardness (Core): 220 – 280 HB After carburizing and quenching, the surface hardness can reach approximately 58 – 62 HRC, depending on case depth and heat treatment parameters. Key Features: • Excellent case hardening capability • Superior core toughness due to nickel content • Good hardenability and wear resistance • High fatigue strength under dynamic loading • Suitable for heavy-duty carburized components Material Characteristics: EN 10084 10NiCr5-4 round bars offer a strong combination of deep case hardening ability and core ductility. The higher nickel content significantly improves toughness and resistance to impact, while chromium supports consistent surface hardness and wear resistance after carburizing. Applications: • Heavy-duty gears and gear shafts • Automotive transmission components • Drive shafts and pinions • Differential components • Industrial machine parts requiring high fatigue strength • Case hardened components subjected to shock loads Conclusion: Ladhani Metal Corporation supplies premium quality EN 10084 10NiCr5-4 round bars in various diameters and finishes. With excellent hardenability, strong core toughness, and reliable performance after carburizing, 10NiCr5-4 steel is widely preferred for demanding automotive and engineering applications. For stock availability, customized sizes, or technical specifications, contact Ladhani Metal Corporation. #EN10084 #EN10084Steel #EN10084Bars #EN10084CarburizingSteel #EN10084CaseHardeningSteel #ENStandardSteel #AlloySteel #CaseHardeningSteel #CarburizingSteel #C10E #C15E #C16E #16MnCr5 #20MnCr5 #18CrNiMo76 #17Cr3 #20MnCrS5 #EngineeringSteelBars #AlloySteelBars #AlloySteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #GearSteel #PinionSteel #ShaftSteel #TransmissionSteel #HeatTreatableSteel #CaseHardenedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #AlloySteelSupplier #EN10084Supplier #EN10084Manufacturer #EN10084Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Bengaluru #Hyderabad #Ahmedabad #Pune #Surat #Jaipur #Lucknow #Kanpur #Nagpur #Indore #Thane #Bhopal #Visakhapatnam #Patna #Vadodara #Ghaziabad #Ludhiana #Coimbatore #Agra #Madurai #Nashik #Faridabad #Meerut #Rajkot #Varanasi #Srinagar #Aurangabad #Dhanbad #Amritsar #NaviMumbai #Allahabad #Ranchi #Howrah #Jabalpur #Gwalior #Vijayawada #Jodhpur #Raipur #Kota #Guwahati #Chandigarh #Solapur #Hubli #Mysuru #Tiruchirappalli #Bareilly

EN 10084 16NiCrS4 is a nickel-chromium alloy carburizing steel with controlled sulphur content, designed for components requiring a hard, wear-resistant surface combined with a tough and impact-resistant core after carburizing and heat treatment. With approximately 0.16% carbon along with nickel and chromium additions, this grade offers excellent hardenability and core strength, while the sulphur addition improves machinability compared to 16NiCr4. Manufactured in accordance with EN 10084, which specifies technical delivery conditions for steels intended for carburizing treatment, 16NiCrS4 steel is widely used in automotive, heavy engineering, and transmission industries. The nickel improves toughness and fatigue resistance, chromium enhances depth of hardening and wear resistance, and the sulphur addition ensures efficient machining prior to heat treatment. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10084 16NiCrS4 round bars, supplied with mill test certificates and strict quality inspection as per European standards. Forms of Supply (as per grade): Hot rolled round bars, Black round bars, Bright round bars, Peeled bars, Turned bars, Ground bars, Forged round bars Explanation of Designation (16NiCrS4): • 16 – Approx. 0.16% carbon content • Ni – Nickel alloyed steel • Cr – Chromium alloyed steel • S – Increased sulphur content for improved machinability • 4 – Alloy content classification Chemical Composition (% – typical limits): • Carbon (C): 0.14 – 0.19 • Manganese (Mn): 0.50 – 0.80 • Silicon (Si): ≤ 0.40 • Nickel (Ni): 0.90 – 1.20 • Chromium (Cr): 0.60 – 0.90 • Phosphorus (P): ≤ 0.025 • Sulphur (S): 0.020 – 0.040 Mechanical Properties (Core, typical normalized condition): • Tensile Strength: 750 – 950 MPa • Yield Strength: ≥ 500 MPa • Elongation: ≥ 10% • Hardness (Core): 200 – 260 HB After carburizing and quenching, the surface hardness can reach approximately 58 – 62 HRC, depending on case depth and heat treatment conditions. Key Features: • Excellent carburizing response • Improved machinability due to controlled sulphur content • Good hardenability from chromium content • High core toughness due to nickel addition • Enhanced fatigue and impact resistance Material Characteristics: EN 10084 16NiCrS4 round bars combine strong hardenability with enhanced machining performance. The nickel addition improves ductility and resistance to shock loading, chromium supports uniform case depth, and sulphur allows efficient machining before carburizing and heat treatment. Applications: • Gears and gear shafts • Transmission components • Drive shafts and axles • Pinions and sprockets • Automotive drivetrain parts • Industrial machinery components requiring case hardening Conclusion: Ladhani Metal Corporation supplies high-quality EN 10084 16NiCrS4 round bars in various diameters and finishes. With reliable hardenability, improved machinability, and strong mechanical performance, 16NiCrS4 steel is widely used in automotive and industrial engineering applications. For stock availability, customized sizes, or technical specifications, contact Ladhani Metal Corporation. #EN10084 #EN10084Steel #EN10084Bars #EN10084CarburizingSteel #EN10084CaseHardeningSteel #ENStandardSteel #AlloySteel #CaseHardeningSteel #CarburizingSteel #C10E #C15E #C16E #16MnCr5 #20MnCr5 #18CrNiMo76 #17Cr3 #20MnCrS5 #EngineeringSteelBars #AlloySteelBars #AlloySteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #GearSteel #PinionSteel #ShaftSteel #TransmissionSteel #HeatTreatableSteel #CaseHardenedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #AlloySteelSupplier #EN10084Supplier #EN10084Manufacturer #EN10084Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Bengaluru #Hyderabad #Ahmedabad #Pune #Surat #Jaipur #Lucknow #Kanpur #Nagpur #Indore #Thane #Bhopal #Visakhapatnam #Patna #Vadodara #Ghaziabad #Ludhiana #Coimbatore #Agra #Madurai #Nashik #Faridabad #Meerut #Rajkot #Varanasi #Srinagar #Aurangabad #Dhanbad #Amritsar #NaviMumbai #Allahabad #Ranchi #Howrah #Jabalpur #Gwalior #Vijayawada #Jodhpur #Raipur #Kota #Guwahati #Chandigarh #Solapur #Hubli #Mysuru #Tiruchirappalli #Bareilly

EN 10084 16NiCr4 is a low alloy nickel-chromium carburizing steel grade designed for components requiring a hard, wear-resistant surface combined with a tough and high-strength core after carburizing and heat treatment. With approximately 0.16% carbon along with nickel and chromium additions, this grade offers excellent hardenability, improved core toughness, and enhanced resistance to impact and fatigue. Manufactured in accordance with EN 10084, which specifies technical delivery conditions for steels intended for carburizing treatment, 16NiCr4 steel is widely used in automotive, transmission, and general engineering industries. The nickel addition improves toughness and impact resistance, while chromium enhances wear resistance and depth of hardening, ensuring reliable mechanical performance after quenching and tempering. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10084 16NiCr4 round bars, supplied with mill test certificates and strict quality inspection as per European standards. Forms of Supply (as per grade): Hot rolled round bars, Black round bars, Bright round bars, Peeled bars, Turned bars, Ground bars, Forged round bars Explanation of Designation (16NiCr4): • 16 – Approx. 0.16% carbon content • Ni – Nickel alloyed steel • Cr – Chromium alloyed steel • 4 – Alloy content classification Chemical Composition (% – typical limits): • Carbon (C): 0.14 – 0.19 • Manganese (Mn): 0.50 – 0.80 • Silicon (Si): ≤ 0.40 • Nickel (Ni): 0.90 – 1.20 • Chromium (Cr): 0.60 – 0.90 • Phosphorus (P): ≤ 0.025 • Sulphur (S): ≤ 0.035 Mechanical Properties (Core, typical normalized condition): • Tensile Strength: 750 – 950 MPa • Yield Strength: ≥ 500 MPa • Elongation: ≥ 10% • Hardness (Core): 200 – 260 HB After carburizing and quenching, the surface hardness can reach approximately 58 – 62 HRC, depending on case depth and heat treatment conditions. Key Features: • Excellent carburizing response • High core toughness due to nickel addition • Good hardenability from chromium content • Improved impact and fatigue resistance • Suitable for dynamically loaded components Material Characteristics: EN 10084 16NiCr4 round bars provide a strong combination of surface hardness and core toughness. The nickel addition enhances ductility and resistance to shock loading, while chromium improves wear resistance and case depth, making this grade suitable for demanding mechanical applications. Applications: • Gears and gear shafts • Transmission components • Pinions and sprockets • Automotive drivetrain parts • Heavy-duty shafts • Industrial machinery components requiring case hardening Conclusion: Ladhani Metal Corporation supplies high-quality EN 10084 16NiCr4 round bars in various diameters and finishes. With enhanced toughness, hardenability, and reliable performance after heat treatment, 16NiCr4 steel is widely used in automotive and industrial engineering applications. For stock availability, customized sizes, or technical specifications, contact Ladhani Metal Corporation. #EN10084 #EN10084Steel #EN10084Bars #EN10084CarburizingSteel #EN10084CaseHardeningSteel #ENStandardSteel #AlloySteel #CaseHardeningSteel #CarburizingSteel #C10E #C15E #C16E #16MnCr5 #20MnCr5 #18CrNiMo76 #17Cr3 #20MnCrS5 #EngineeringSteelBars #AlloySteelBars #AlloySteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #GearSteel #PinionSteel #ShaftSteel #TransmissionSteel #HeatTreatableSteel #CaseHardenedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #AlloySteelSupplier #EN10084Supplier #EN10084Manufacturer #EN10084Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Bengaluru #Hyderabad #Ahmedabad #Pune #Surat #Jaipur #Lucknow #Kanpur #Nagpur #Indore #Thane #Bhopal #Visakhapatnam #Patna #Vadodara #Ghaziabad #Ludhiana #Coimbatore #Agra #Madurai #Nashik #Faridabad #Meerut #Rajkot #Varanasi #Srinagar #Aurangabad #Dhanbad #Amritsar #NaviMumbai #Allahabad #Ranchi #Howrah #Jabalpur #Gwalior #Vijayawada #Jodhpur #Raipur #Kota #Guwahati #Chandigarh #Solapur #Hubli #Mysuru #Tiruchirappalli #Bareilly

EN 10084 20MoCrS4 is a low alloy molybdenum-chromium carburizing steel grade with controlled sulphur content, designed for components requiring a hard, wear-resistant surface combined with a strong and tough core after carburizing and heat treatment. With approximately 0.20% carbon along with molybdenum and chromium additions, this grade offers excellent hardenability, while the increased sulphur content improves machinability compared to 20MoCr4. Manufactured in accordance with EN 10084, which specifies technical delivery conditions for steels intended for carburizing treatment, 20MoCrS4 steel is widely used in automotive, heavy engineering, and power transmission industries. The chromium improves depth of hardening and wear resistance, molybdenum enhances strength and tempering resistance, and the sulphur addition ensures efficient machining prior to heat treatment. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10084 20MoCrS4 round bars, supplied with mill test certificates and strict quality inspection as per European standards. Forms of Supply (as per grade): Hot rolled round bars, Black round bars, Bright round bars, Peeled bars, Turned bars, Ground bars, Forged round bars Explanation of Designation (20MoCrS4): • 20 – Approx. 0.20% carbon content • Mo – Molybdenum alloyed steel • Cr – Chromium alloyed steel • S – Increased sulphur content for improved machinability • 4 – Alloy content classification Chemical Composition (% – typical limits): • Carbon (C): 0.17 – 0.23 • Manganese (Mn): 0.60 – 0.90 • Silicon (Si): ≤ 0.40 • Chromium (Cr): 0.90 – 1.20 • Molybdenum (Mo): 0.20 – 0.35 • Phosphorus (P): ≤ 0.025 • Sulphur (S): 0.020 – 0.040 Mechanical Properties (Core, typical normalized condition): • Tensile Strength: 900 – 1100 MPa • Yield Strength: ≥ 650 MPa • Elongation: ≥ 8% • Hardness (Core): 240 – 300 HB After carburizing and quenching, the surface hardness can reach approximately 58 – 62 HRC, depending on case depth and heat treatment conditions. Key Features: • Excellent carburizing response • Improved machinability due to controlled sulphur content • Superior hardenability from higher Cr and Mo content • High core strength with good toughness • Enhanced resistance to wear and temper softening Material Characteristics: EN 10084 20MoCrS4 round bars combine strong hardenability with enhanced machining performance. The increased chromium and molybdenum content enables deeper and more uniform case hardening, while sulphur supports efficient machining before carburizing and heat treatment. Applications: • Heavy-duty gears and gear shafts • Transmission components • Drive shafts and axles • Pinions and sprockets • Automotive drivetrain parts • Industrial machinery components requiring deep case hardening Conclusion: Ladhani Metal Corporation supplies high-quality EN 10084 20MoCrS4 round bars in various diameters and finishes. With reliable hardenability, improved machinability, and strong mechanical performance, 20MoCrS4 steel is widely used in automotive and industrial engineering applications. For stock availability, customized sizes, or technical specifications, contact Ladhani Metal Corporation. #EN10084 #EN10084Steel #EN10084Bars #EN10084CarburizingSteel #EN10084CaseHardeningSteel #ENStandardSteel #AlloySteel #CaseHardeningSteel #CarburizingSteel #C10E #C15E #C16E #16MnCr5 #20MnCr5 #18CrNiMo76 #17Cr3 #20MnCrS5 #EngineeringSteelBars #AlloySteelBars #AlloySteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #GearSteel #PinionSteel #ShaftSteel #TransmissionSteel #HeatTreatableSteel #CaseHardenedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #AlloySteelSupplier #EN10084Supplier #EN10084Manufacturer #EN10084Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Bengaluru #Hyderabad #Ahmedabad #Pune #Surat #Jaipur #Lucknow #Kanpur #Nagpur #Indore #Thane #Bhopal #Visakhapatnam #Patna #Vadodara #Ghaziabad #Ludhiana #Coimbatore #Agra #Madurai #Nashik #Faridabad #Meerut #Rajkot #Varanasi #Srinagar #Aurangabad #Dhanbad #Amritsar #NaviMumbai #Allahabad #Ranchi #Howrah #Jabalpur #Gwalior #Vijayawada #Jodhpur #Raipur #Kota #Guwahati #Chandigarh #Solapur #Hubli #Mysuru #Tiruchirappalli #Bareilly

EN 10084 20MoCr4 is a low alloy molybdenum-chromium carburizing steel grade designed for components requiring a hard, wear-resistant surface combined with a strong and tough core after carburizing and heat treatment. With approximately 0.20% carbon along with molybdenum and chromium additions, this grade offers excellent hardenability, improved core strength, and enhanced resistance to wear and fatigue compared to lower alloy carburizing steels. Manufactured in accordance with EN 10084, which specifies technical delivery conditions for steels intended for carburizing treatment, 20MoCr4 steel is widely used in automotive, heavy engineering, and power transmission industries. The chromium improves depth of hardening and wear resistance, while molybdenum enhances strength, tempering resistance, and overall mechanical stability after quenching and tempering. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10084 20MoCr4 round bars, supplied with mill test certificates and strict quality inspection as per European standards. Forms of Supply (as per grade): Hot rolled round bars, Black round bars, Bright round bars, Peeled bars, Turned bars, Ground bars, Forged round bars Explanation of Designation (20MoCr4): • 20 – Approx. 0.20% carbon content • Mo – Molybdenum alloyed steel • Cr – Chromium alloyed steel • 4 – Alloy content classification Chemical Composition (% – typical limits): • Carbon (C): 0.17 – 0.23 • Manganese (Mn): 0.60 – 0.90 • Silicon (Si): ≤ 0.40 • Chromium (Cr): 0.90 – 1.20 • Molybdenum (Mo): 0.20 – 0.35 • Phosphorus (P): ≤ 0.025 • Sulphur (S): ≤ 0.035 Mechanical Properties (Core, typical normalized condition): • Tensile Strength: 900 – 1100 MPa • Yield Strength: ≥ 650 MPa • Elongation: ≥ 9% • Hardness (Core): 240 – 300 HB After carburizing and quenching, the surface hardness can reach approximately 58 – 62 HRC, depending on case depth and heat treatment conditions. Key Features: • Excellent carburizing response • Superior hardenability due to higher Cr and Mo content • High core strength with good toughness • Improved resistance to wear, fatigue, and temper softening • Suitable for heavily loaded components Material Characteristics: EN 10084 20MoCr4 round bars provide enhanced hardenability and strength compared to lower alloy grades. The increased chromium and molybdenum content allows deeper and more uniform case hardening, making the material suitable for high-stress and heavy-duty mechanical applications. Applications: • Heavy-duty gears and gear shafts • Transmission components • Drive shafts and axles • Pinions and sprockets • Automotive drivetrain parts • Industrial machinery components requiring deep case hardening Conclusion: Ladhani Metal Corporation supplies high-quality EN 10084 20MoCr4 round bars in various diameters and finishes. With improved hardenability, strong core properties, and reliable performance after heat treatment, 20MoCr4 steel is widely used in automotive and industrial engineering applications. For stock availability, customized sizes, or technical specifications, contact Ladhani Metal Corporation. #EN10084 #EN10084Steel #EN10084Bars #EN10084CarburizingSteel #EN10084CaseHardeningSteel #ENStandardSteel #AlloySteel #CaseHardeningSteel #CarburizingSteel #C10E #C15E #C16E #16MnCr5 #20MnCr5 #18CrNiMo76 #17Cr3 #20MnCrS5 #EngineeringSteelBars #AlloySteelBars #AlloySteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #GearSteel #PinionSteel #ShaftSteel #TransmissionSteel #HeatTreatableSteel #CaseHardenedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #AlloySteelSupplier #EN10084Supplier #EN10084Manufacturer #EN10084Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Bengaluru #Hyderabad #Ahmedabad #Pune #Surat #Jaipur #Lucknow #Kanpur #Nagpur #Indore #Thane #Bhopal #Visakhapatnam #Patna #Vadodara #Ghaziabad #Ludhiana #Coimbatore #Agra #Madurai #Nashik #Faridabad #Meerut #Rajkot #Varanasi #Srinagar #Aurangabad #Dhanbad #Amritsar #NaviMumbai #Allahabad #Ranchi #Howrah #Jabalpur #Gwalior #Vijayawada #Jodhpur #Raipur #Kota #Guwahati #Chandigarh #Solapur #Hubli #Mysuru #Tiruchirappalli #Bareilly

EN 10084 20MoCrS3 is a low alloy molybdenum-chromium carburizing steel grade with controlled sulphur content, designed for components requiring a hard, wear-resistant surface combined with a strong and tough core after carburizing and heat treatment. With approximately 0.20% carbon along with molybdenum and chromium additions, this grade offers excellent hardenability, while the increased sulphur content improves machinability compared to 20MoCr3. Manufactured in accordance with EN 10084, which specifies technical delivery conditions for steels intended for carburizing treatment, 20MoCrS3 steel is widely used in automotive, heavy engineering, and power transmission industries. The chromium improves depth of hardening and wear resistance, molybdenum enhances strength and tempering resistance, and the sulphur addition ensures efficient machining before heat treatment. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10084 20MoCrS3 round bars, supplied with mill test certificates and strict quality inspection as per European standards. Forms of Supply (as per grade): Hot rolled round bars, Black round bars, Bright round bars, Peeled bars, Turned bars, Ground bars, Forged round bars Explanation of Designation (20MoCrS3): • 20 – Approx. 0.20% carbon content • Mo – Molybdenum alloyed steel • Cr – Chromium alloyed steel • S – Increased sulphur content for improved machinability • 3 – Alloy content classification Chemical Composition (% – typical limits): • Carbon (C): 0.17 – 0.23 • Manganese (Mn): 0.60 – 0.90 • Silicon (Si): ≤ 0.40 • Chromium (Cr): 0.60 – 0.90 • Molybdenum (Mo): 0.15 – 0.30 • Phosphorus (P): ≤ 0.025 • Sulphur (S): 0.020 – 0.040 Mechanical Properties (Core, typical normalized condition): • Tensile Strength: 850 – 1050 MPa • Yield Strength: ≥ 600 MPa • Elongation: ≥ 8% • Hardness (Core): 220 – 280 HB After carburizing and quenching, the surface hardness can reach approximately 58 – 62 HRC, depending on case depth and heat treatment conditions. Key Features: • Excellent carburizing response • Improved machinability due to controlled sulphur content • Superior hardenability from Mo and Cr additions • High core strength with good toughness • Enhanced resistance to wear and fatigue Material Characteristics: EN 10084 20MoCrS3 round bars combine strong hardenability with enhanced machining performance. The molybdenum improves tempering resistance and strength retention, while chromium enhances wear resistance and case depth. The sulphur addition supports efficient machining prior to heat treatment. Applications: • Heavy-duty gears and gear shafts • Transmission components • Drive shafts and axles • Pinions and sprockets • Automotive drivetrain parts • Industrial machinery components requiring case hardening Conclusion: Ladhani Metal Corporation supplies high-quality EN 10084 20MoCrS3 round bars in various diameters and finishes. With reliable hardenability, improved machinability, and strong mechanical properties, 20MoCrS3 steel is widely used in automotive and industrial engineering applications requiring durable, case-hardened components. For stock availability, customized sizes, or technical specifications, contact Ladhani Metal Corporation. #EN10084 #EN10084Steel #EN10084Bars #EN10084CarburizingSteel #EN10084CaseHardeningSteel #ENStandardSteel #AlloySteel #CaseHardeningSteel #CarburizingSteel #C10E #C15E #C16E #16MnCr5 #20MnCr5 #18CrNiMo76 #17Cr3 #20MnCrS5 #EngineeringSteelBars #AlloySteelBars #AlloySteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #GearSteel #PinionSteel #ShaftSteel #TransmissionSteel #HeatTreatableSteel #CaseHardenedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #AlloySteelSupplier #EN10084Supplier #EN10084Manufacturer #EN10084Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Bengaluru #Hyderabad #Ahmedabad #Pune #Surat #Jaipur #Lucknow #Kanpur #Nagpur #Indore #Thane #Bhopal #Visakhapatnam #Patna #Vadodara #Ghaziabad #Ludhiana #Coimbatore #Agra #Madurai #Nashik #Faridabad #Meerut #Rajkot #Varanasi #Srinagar #Aurangabad #Dhanbad #Amritsar #NaviMumbai #Allahabad #Ranchi #Howrah #Jabalpur #Gwalior #Vijayawada #Jodhpur #Raipur #Kota #Guwahati #Chandigarh #Solapur #Hubli #Mysuru #Tiruchirappalli #Bareilly

EN 10084 20MoCr3 is a low alloy molybdenum-chromium carburizing steel grade designed for components requiring a hard, wear-resistant surface combined with a strong and tough core after carburizing and heat treatment. With approximately 0.20% carbon along with molybdenum and chromium additions, this grade offers excellent hardenability, improved core strength, and enhanced resistance to wear and fatigue. Manufactured in accordance with EN 10084, which specifies technical delivery conditions for steels intended for carburizing treatment, 20MoCr3 steel is widely used in automotive, heavy engineering, and power transmission industries. The chromium improves depth of hardening and wear resistance, while molybdenum enhances strength and tempering resistance, ensuring consistent mechanical performance after quenching and tempering. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10084 20MoCr3 round bars, supplied with mill test certificates and strict quality inspection as per European standards. Forms of Supply (as per grade): Hot rolled round bars, Black round bars, Bright round bars, Peeled bars, Turned bars, Ground bars, Forged round bars Explanation of Designation (20MoCr3): • 20 – Approx. 0.20% carbon content • Mo – Molybdenum alloyed steel • Cr – Chromium alloyed steel • 3 – Alloy content classification Chemical Composition (% – typical limits): • Carbon (C): 0.17 – 0.23 • Manganese (Mn): 0.60 – 0.90 • Silicon (Si): ≤ 0.40 • Chromium (Cr): 0.60 – 0.90 • Molybdenum (Mo): 0.15 – 0.30 • Phosphorus (P): ≤ 0.025 • Sulphur (S): ≤ 0.035 Mechanical Properties (Core, typical normalized condition): • Tensile Strength: 850 – 1050 MPa • Yield Strength: ≥ 600 MPa • Elongation: ≥ 9% • Hardness (Core): 220 – 280 HB After carburizing and quenching, the surface hardness can reach approximately 58 – 62 HRC, depending on case depth and heat treatment conditions. Key Features: • Excellent carburizing response • Superior hardenability due to Mo and Cr additions • High core strength with good toughness • Improved resistance to wear and fatigue • Good tempering resistance Material Characteristics: EN 10084 20MoCr3 round bars provide a strong combination of deep case hardening capability and high core strength. The molybdenum addition improves resistance to temper softening, while chromium enhances wear resistance and uniform hardness distribution. Applications: • Heavy-duty gears and gear shafts • Transmission components • Drive shafts and axles • Pinions and sprockets • Automotive drivetrain parts • Industrial machinery components requiring case hardening Conclusion: Ladhani Metal Corporation supplies high-quality EN 10084 20MoCr3 round bars in various diameters and finishes. With enhanced hardenability and strong mechanical properties, 20MoCr3 steel is widely used in automotive and industrial engineering applications requiring durable, case-hardened components. For stock availability, customized sizes, or technical specifications, contact Ladhani Metal Corporation. #EN10084 #EN10084Steel #EN10084Bars #EN10084CarburizingSteel #EN10084CaseHardeningSteel #ENStandardSteel #AlloySteel #CaseHardeningSteel #CarburizingSteel #C10E #C15E #C16E #16MnCr5 #20MnCr5 #18CrNiMo76 #17Cr3 #20MnCrS5 #EngineeringSteelBars #AlloySteelBars #AlloySteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #GearSteel #PinionSteel #ShaftSteel #TransmissionSteel #HeatTreatableSteel #CaseHardenedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #AlloySteelSupplier #EN10084Supplier #EN10084Manufacturer #EN10084Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Bengaluru #Hyderabad #Ahmedabad #Pune #Surat #Jaipur #Lucknow #Kanpur #Nagpur #Indore #Thane #Bhopal #Visakhapatnam #Patna #Vadodara #Ghaziabad #Ludhiana #Coimbatore #Agra #Madurai #Nashik #Faridabad #Meerut #Rajkot #Varanasi #Srinagar #Aurangabad #Dhanbad #Amritsar #NaviMumbai #Allahabad #Ranchi #Howrah #Jabalpur #Gwalior #Vijayawada #Jodhpur #Raipur #Kota #Guwahati #Chandigarh #Solapur #Hubli #Mysuru #Tiruchirappalli #Bareilly

EN 10084 22CrMoS3-5 is a low alloy chromium-molybdenum carburizing steel grade with controlled sulphur content, designed for components requiring a hard, wear-resistant surface along with a strong and tough core after carburizing and heat treatment. With approximately 0.22% carbon and alloying elements such as chromium and molybdenum, this grade provides enhanced hardenability, improved core strength, and excellent fatigue resistance. The added sulphur improves machinability compared to non-sulphurized grades. Manufactured in accordance with EN 10084, which specifies technical delivery conditions for steels intended for carburizing treatment, 22CrMoS3-5 steel is widely used in automotive, heavy engineering, and power transmission industries. The chromium improves depth of hardening and wear resistance, molybdenum enhances tempering resistance and strength, and the sulphur content ensures efficient machining before heat treatment. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10084 22CrMoS3-5 round bars, supplied with mill test certificates and strict quality inspection as per European standards. Forms of Supply (as per grade): Hot rolled round bars, Black round bars, Bright round bars, Peeled bars, Turned bars, Ground bars, Forged round bars Explanation of Designation (22CrMoS3-5): • 22 – Approx. 0.22% carbon content • Cr – Chromium alloyed steel • Mo – Molybdenum alloyed steel • S – Increased sulphur content for improved machinability • 3-5 – Alloy content classification Chemical Composition (% – typical limits): • Carbon (C): 0.19 – 0.25 • Manganese (Mn): 0.60 – 0.90 • Silicon (Si): ≤ 0.40 • Chromium (Cr): 0.60 – 0.90 • Molybdenum (Mo): 0.15 – 0.30 • Phosphorus (P): ≤ 0.025 • Sulphur (S): 0.020 – 0.040 Mechanical Properties (Core, typical normalized condition): • Tensile Strength: 900 – 1100 MPa • Yield Strength: ≥ 650 MPa • Elongation: ≥ 8% • Hardness (Core): 240 – 300 HB After carburizing and quenching, the surface hardness can reach approximately 58 – 62 HRC, depending on case depth and heat treatment conditions. Key Features: • Excellent carburizing response • High hardenability due to Cr and Mo additions • Improved machinability from controlled sulphur content • High core strength and fatigue resistance • Good tempering resistance Material Characteristics: EN 10084 22CrMoS3-5 round bars provide a combination of deep case hardening capability and strong core properties. The chromium and molybdenum improve wear resistance and strength retention, while sulphur ensures better machining efficiency before heat treatment. Applications: • Heavy-duty gears and gear shafts • Transmission components • Drive shafts and axles • Pinions and sprockets • Automotive drivetrain parts • Industrial machinery components requiring deep case hardening Conclusion: Ladhani Metal Corporation supplies high-quality EN 10084 22CrMoS3-5 round bars in various diameters and finishes. With enhanced hardenability, strong core strength, and improved machinability, 22CrMoS3-5 steel is widely used in automotive and industrial engineering applications requiring durable, case-hardened components. For stock availability, customized sizes, or technical specifications, contact Ladhani Metal Corporation. #EN10084 #EN10084Steel #EN10084Bars #EN10084CarburizingSteel #EN10084CaseHardeningSteel #ENStandardSteel #AlloySteel #CaseHardeningSteel #CarburizingSteel #C10E #C15E #C16E #16MnCr5 #20MnCr5 #18CrNiMo76 #17Cr3 #20MnCrS5 #EngineeringSteelBars #AlloySteelBars #AlloySteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #GearSteel #PinionSteel #ShaftSteel #TransmissionSteel #HeatTreatableSteel #CaseHardenedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #AlloySteelSupplier #EN10084Supplier #EN10084Manufacturer #EN10084Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Bengaluru #Hyderabad #Ahmedabad #Pune #Surat #Jaipur #Lucknow #Kanpur #Nagpur #Indore #Thane #Bhopal #Visakhapatnam #Patna #Vadodara #Ghaziabad #Ludhiana #Coimbatore #Agra #Madurai #Nashik #Faridabad #Meerut #Rajkot #Varanasi #Srinagar #Aurangabad #Dhanbad #Amritsar #NaviMumbai #Allahabad #Ranchi #Howrah #Jabalpur #Gwalior #Vijayawada #Jodhpur #Raipur #Kota #Guwahati #Chandigarh #Solapur #Hubli #Mysuru #Tiruchirappalli #Bareilly

EN 10084 18CrMoS4 is a low alloy chromium-molybdenum carburizing steel grade with controlled sulphur content, designed for components requiring a hard, wear-resistant surface and a tough, high-strength core after carburizing and heat treatment. With approximately 0.18% carbon along with chromium and molybdenum additions, this grade offers excellent hardenability, while the increased sulphur content improves machinability compared to 18CrMo4. Manufactured in accordance with EN 10084, which specifies technical delivery conditions for steels intended for carburizing treatment, 18CrMoS4 steel is widely used in automotive, heavy engineering, and power transmission industries. The chromium enhances depth of hardening and wear resistance, molybdenum improves strength and tempering resistance, and the sulphur addition supports efficient machining before heat treatment. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10084 18CrMoS4 round bars, supplied with mill test certificates and strict quality inspection as per European standards. Forms of Supply (as per grade): Hot rolled round bars, Black round bars, Bright round bars, Peeled bars, Turned bars, Ground bars, Forged round bars Explanation of Designation (18CrMoS4): • 18 – Approx. 0.18% carbon content • Cr – Chromium alloyed steel • Mo – Molybdenum alloyed steel • S – Increased sulphur content for improved machinability • 4 – Alloy content classification Chemical Composition (% – typical limits): • Carbon (C): 0.15 – 0.21 • Manganese (Mn): 0.60 – 0.90 • Silicon (Si): ≤ 0.40 • Chromium (Cr): 0.90 – 1.20 • Molybdenum (Mo): 0.15 – 0.30 • Phosphorus (P): ≤ 0.025 • Sulphur (S): 0.020 – 0.040 Mechanical Properties (Core, typical normalized condition): • Tensile Strength: 850 – 1050 MPa • Yield Strength: ≥ 600 MPa • Elongation: ≥ 8% • Hardness (Core): 230 – 290 HB After carburizing and quenching, the surface hardness can reach approximately 58 – 62 HRC, depending on case depth and heat treatment conditions. Key Features: • Excellent carburizing response • Superior hardenability due to Cr and Mo additions • Improved machinability from controlled sulphur content • High core strength with good toughness • Enhanced resistance to wear and fatigue Material Characteristics: EN 10084 18CrMoS4 round bars combine strong hardenability and enhanced machining performance. The molybdenum addition improves strength retention and resistance to temper softening, while sulphur ensures better machinability prior to carburizing and heat treatment. Applications: • Heavy-duty gears and gear shafts • Transmission components • Drive shafts and axles • Pinions and sprockets • Automotive drivetrain parts • Industrial machinery components requiring deep case hardening Conclusion: Ladhani Metal Corporation supplies high-quality EN 10084 18CrMoS4 round bars in various diameters and finishes. With reliable hardenability, improved machinability, and strong core properties, 18CrMoS4 steel is widely used in automotive and industrial engineering applications. For stock availability, customized sizes, or technical specifications, contact Ladhani Metal Corporation. #EN10084 #EN10084Steel #EN10084Bars #EN10084CarburizingSteel #EN10084CaseHardeningSteel #ENStandardSteel #AlloySteel #CaseHardeningSteel #CarburizingSteel #C10E #C15E #C16E #16MnCr5 #20MnCr5 #18CrNiMo76 #17Cr3 #20MnCrS5 #EngineeringSteelBars #AlloySteelBars #AlloySteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #GearSteel #PinionSteel #ShaftSteel #TransmissionSteel #HeatTreatableSteel #CaseHardenedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #AlloySteelSupplier #EN10084Supplier #EN10084Manufacturer #EN10084Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Bengaluru #Hyderabad #Ahmedabad #Pune #Surat #Jaipur #Lucknow #Kanpur #Nagpur #Indore #Thane #Bhopal #Visakhapatnam #Patna #Vadodara #Ghaziabad #Ludhiana #Coimbatore #Agra #Madurai #Nashik #Faridabad #Meerut #Rajkot #Varanasi #Srinagar #Aurangabad #Dhanbad #Amritsar #NaviMumbai #Allahabad #Ranchi #Howrah #Jabalpur #Gwalior #Vijayawada #Jodhpur #Raipur #Kota #Guwahati #Chandigarh #Solapur #Hubli #Mysuru #Tiruchirappalli #Bareilly

EN 10084 18CrMo4 is a low alloy chromium-molybdenum carburizing steel grade designed for components requiring a hard, wear-resistant surface with a tough and high-strength core after carburizing and heat treatment. With approximately 0.18% carbon along with chromium and molybdenum additions, this grade offers excellent hardenability, improved core strength, and enhanced resistance to wear and fatigue. Manufactured in accordance with EN 10084, which specifies technical delivery conditions for steels intended for carburizing treatment, 18CrMo4 steel is widely used in automotive, heavy engineering, and power transmission industries. The chromium improves depth of hardening and wear resistance, while molybdenum enhances strength and tempering resistance, ensuring reliable mechanical performance after quenching and tempering. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10084 18CrMo4 round bars, supplied with mill test certificates and strict quality inspection as per European standards. Forms of Supply (as per grade): Hot rolled round bars, Black round bars, Bright round bars, Peeled bars, Turned bars, Ground bars, Forged round bars Explanation of Designation (18CrMo4): • 18 – Approx. 0.18% carbon content • Cr – Chromium alloyed steel • Mo – Molybdenum alloyed steel • 4 – Alloy content classification Chemical Composition (% – typical limits): • Carbon (C): 0.15 – 0.21 • Manganese (Mn): 0.60 – 0.90 • Silicon (Si): ≤ 0.40 • Chromium (Cr): 0.90 – 1.20 • Molybdenum (Mo): 0.15 – 0.30 • Phosphorus (P): ≤ 0.025 • Sulphur (S): ≤ 0.035 Mechanical Properties (Core, typical normalized condition): • Tensile Strength: 850 – 1050 MPa • Yield Strength: ≥ 600 MPa • Elongation: ≥ 9% • Hardness (Core): 230 – 290 HB After carburizing and quenching, the surface hardness can reach approximately 58 – 62 HRC, depending on case depth and heat treatment conditions. Key Features: • Excellent carburizing response • Superior hardenability due to Cr and Mo additions • High core strength with good toughness • Improved resistance to wear and fatigue • Good tempering resistance Material Characteristics: EN 10084 18CrMo4 round bars provide a strong combination of surface hardness and high core strength. The addition of molybdenum enhances strength retention at elevated temperatures and improves resistance to softening during tempering, making the grade suitable for heavily loaded components. Applications: • Heavy-duty gears and gear shafts • Transmission components • Drive shafts and axles • Pinions and sprockets • Automotive drivetrain parts • Industrial machinery components requiring deep case hardening Conclusion: Ladhani Metal Corporation supplies high-quality EN 10084 18CrMo4 round bars in various diameters and finishes. With enhanced hardenability, strength, and wear resistance, 18CrMo4 steel is widely used in automotive and industrial engineering applications requiring durable, case-hardened components. For stock availability, customized sizes, or technical specifications, contact Ladhani Metal Corporation. #EN10084 #EN10084Steel #EN10084Bars #EN10084CarburizingSteel #EN10084CaseHardeningSteel #ENStandardSteel #AlloySteel #CaseHardeningSteel #CarburizingSteel #C10E #C15E #C16E #16MnCr5 #20MnCr5 #18CrNiMo76 #17Cr3 #20MnCrS5 #EngineeringSteelBars #AlloySteelBars #AlloySteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #GearSteel #PinionSteel #ShaftSteel #TransmissionSteel #HeatTreatableSteel #CaseHardenedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #AlloySteelSupplier #EN10084Supplier #EN10084Manufacturer #EN10084Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Bengaluru #Hyderabad #Ahmedabad #Pune #Surat #Jaipur #Lucknow #Kanpur #Nagpur #Indore #Thane #Bhopal #Visakhapatnam #Patna #Vadodara #Ghaziabad #Ludhiana #Coimbatore #Agra #Madurai #Nashik #Faridabad #Meerut #Rajkot #Varanasi #Srinagar #Aurangabad #Dhanbad #Amritsar #NaviMumbai #Allahabad #Ranchi #Howrah #Jabalpur #Gwalior #Vijayawada #Jodhpur #Raipur #Kota #Guwahati #Chandigarh #Solapur #Hubli #Mysuru #Tiruchirappalli #Bareilly

EN 10084 20MnCrS5 is a low alloy manganese-chromium carburizing steel grade with controlled sulphur content, designed for components requiring a hard, wear-resistant surface combined with a tough and high-strength core after carburizing and heat treatment. With approximately 0.20% carbon along with manganese and chromium additions, this grade offers excellent hardenability, while the increased sulphur content improves machinability compared to 20MnCr5. Manufactured in accordance with EN 10084, which specifies technical delivery conditions for steels intended for carburizing treatment, 20MnCrS5 steel is widely used in automotive, transmission, and heavy engineering industries. The balanced alloy composition ensures uniform case hardening, reliable core strength, and consistent mechanical performance after quenching and tempering. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10084 20MnCrS5 round bars, supplied with mill test certificates and strict quality inspection as per European standards. Forms of Supply (as per grade): Hot rolled round bars, Black round bars, Bright round bars, Peeled bars, Turned bars, Ground bars, Forged round bars Explanation of Designation (20MnCrS5): • 20 – Approx. 0.20% carbon content • Mn – Manganese alloyed steel • Cr – Chromium alloyed steel • S – Increased sulphur content for improved machinability • 5 – Alloy content classification Chemical Composition (% – typical limits): • Carbon (C): 0.17 – 0.22 • Manganese (Mn): 1.10 – 1.40 • Silicon (Si): ≤ 0.40 • Chromium (Cr): 1.00 – 1.30 • Phosphorus (P): ≤ 0.025 • Sulphur (S): 0.020 – 0.040 Mechanical Properties (Core, typical normalized condition): • Tensile Strength: 800 – 1000 MPa • Yield Strength: ≥ 550 MPa • Elongation: ≥ 8% • Hardness (Core): 220 – 280 HB After carburizing and quenching, the surface hardness can reach approximately 58 – 62 HRC, depending on case depth and heat treatment conditions. Key Features: • Excellent carburizing response • Improved machinability due to controlled sulphur content • High hardenability from Mn and Cr additions • Strong core strength with good toughness • Uniform case depth and hardness distribution Material Characteristics: EN 10084 20MnCrS5 round bars combine enhanced machining performance with excellent carburizing characteristics. The manganese and chromium additions improve hardenability and wear resistance, while the sulphur content supports efficient machining before heat treatment. Applications: • Gears and gear shafts • Transmission components • Camshafts • Pinions and sprockets • Automotive drivetrain parts • Industrial machinery components requiring case hardening Conclusion: Ladhani Metal Corporation supplies high-quality EN 10084 20MnCrS5 round bars in various diameters and finishes. With reliable hardenability, improved machinability, and excellent case hardening properties, 20MnCrS5 steel is widely used in automotive and industrial engineering applications. For stock availability, customized sizes, or technical specifications, contact Ladhani Metal Corporation. #EN10084 #EN10084Steel #EN10084Bars #EN10084CarburizingSteel #EN10084CaseHardeningSteel #ENStandardSteel #AlloySteel #CaseHardeningSteel #CarburizingSteel #C10E #C15E #C16E #16MnCr5 #20MnCr5 #18CrNiMo76 #17Cr3 #20MnCrS5 #EngineeringSteelBars #AlloySteelBars #AlloySteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #GearSteel #PinionSteel #ShaftSteel #TransmissionSteel #HeatTreatableSteel #CaseHardenedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #AlloySteelSupplier #EN10084Supplier #EN10084Manufacturer #EN10084Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Bengaluru #Hyderabad #Ahmedabad #Pune #Surat #Jaipur #Lucknow #Kanpur #Nagpur #Indore #Thane #Bhopal #Visakhapatnam #Patna #Vadodara #Ghaziabad #Ludhiana #Coimbatore #Agra #Madurai #Nashik #Faridabad #Meerut #Rajkot #Varanasi #Srinagar #Aurangabad #Dhanbad #Amritsar #NaviMumbai #Allahabad #Ranchi #Howrah #Jabalpur #Gwalior #Vijayawada #Jodhpur #Raipur #Kota #Guwahati #Chandigarh #Solapur #Hubli #Mysuru #Tiruchirappalli #Bareilly