Products

EN 10088-3 X8CrMnNiN18-9-5 is a nitrogen-alloyed austenitic stainless steel grade engineered to deliver high strength, excellent toughness, and good corrosion resistance. The combined addition of manganese and nitrogen significantly enhances yield strength while maintaining the ductility and formability typical of austenitic stainless steels. Supplied in rod and bar form, X8CrMnNiN18-9-5 stainless steel is well suited for demanding engineering and structural applications where higher mechanical strength and reliable corrosion performance are required. This grade conforms to the EN 10088-3 standard, which specifies technical delivery conditions for stainless steel rods, bars, and related long products for general purposes. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X8CrMnNiN18-9-5 stainless steel rods and bars. Our products are sourced from approved mills and supplied in full compliance with EN 10088-3 specifications, ensuring consistent chemical composition, controlled mechanical properties, and precise dimensional accuracy. Forms of Supply: Round bar, hex bar, square bar, rectangular bar, flat bar, rod Explanation of Designation (X8CrMnNiN18-9-5): • X – High-alloy steel • 8 – Approx. 0.08% carbon content • CrMnNiN18-9-5 – Approx. 18% chromium, 9% nickel, with manganese and nitrogen addition Chemical Composition (% – typical limits): • Carbon (C): ≤ 0.10 • Chromium (Cr): 17.0 – 19.0 • Nickel (Ni): 8.0 – 10.0 • Manganese (Mn): 4.0 – 6.0 • Nitrogen (N): 0.15 – 0.30 • Silicon (Si): ≤ 1.00 • Phosphorus (P): ≤ 0.040 • Sulphur (S): ≤ 0.015 Mechanical Properties (Typical, depending on condition): • Tensile Strength: 700 – 900 MPa • Yield Strength: ≥ 400 MPa • Elongation: 30 – 40% • Hardness: Typically 180 – 240 HB Key Features: • Nitrogen-strengthened austenitic stainless steel • High yield and tensile strength • Excellent toughness and ductility • Good resistance to general corrosion • Non-magnetic in annealed condition • Good formability and weldability Material Characteristics: EN 10088-3 X8CrMnNiN18-9-5 stainless steel rod and bar provides an excellent balance of strength, toughness, and corrosion resistance. Nitrogen alloying enables higher mechanical performance while retaining the processing advantages of austenitic stainless steels. Applications: • Structural and load-bearing components • Shafts, fasteners, and machined parts • Pressure vessels and engineering equipment • Construction and industrial machinery • Chemical and process industry components Conclusion: Ladhani Metal Corporation supplies high-quality EN 10088-3 X8CrMnNiN18-9-5 stainless steel rods and bars in round, hex, square, rectangular, flat, and rod forms. With enhanced strength, good corrosion resistance, and excellent toughness, X8CrMnNiN18-9-5 stainless steel rod is a reliable choice for demanding engineering and structural applications. For size availability or technical support, contact Ladhani Metal Corporation. #EN10088 #EN100883 #EN100883Steel #EN10088StainlessSteel #StainlessSteel #EuropeanStainlessSteel #ENStandardStainlessSteel #EN10088Supplier #EN10088Manufacturer #EN10088Stockist #EN10088Exporter #StainlessSteelBars #StainlessSteelRods #StainlessSteelWire #StainlessSteelBrightBar #SSRoundBar #SSFlatBar #SSHexBar #SSSquareBar #AusteniticStainlessSteel #FerriticStainlessSteel #MartensiticStainlessSteel #DuplexStainlessSteel #304StainlessSteel #304LStainlessSteel #316StainlessSteel #316LStainlessSteel #2205Duplex #StainlessSteelManufacturers #StainlessSteelSuppliers #StainlessSteelStockist #StainlessSteelExporters #IndianStainlessSteel #SSStockist #SSExporter #SteelIndustry #MetalIndustry #EngineeringSteel #IndustrialSteel #CorrosionResistantSteel #HighStrengthStainlessSteel #WeldableStainlessSteel #MachiningSteel #BrightBars #SteelBars #SteelRods #SteelWire #InfrastructureSteel #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar

EN 10088-3 X11CrNiMnN19-8-6 is a nitrogen-alloyed austenitic stainless steel grade designed to provide high strength, excellent toughness, and good corrosion resistance. The addition of nitrogen and manganese significantly enhances yield strength while maintaining the ductility and formability typical of austenitic stainless steels. Supplied in bar and rod form, X11CrNiMnN19-8-6 stainless steel is suitable for demanding engineering and structural applications where higher mechanical strength is required without sacrificing corrosion performance. This grade conforms to the EN 10088-3 standard, which specifies technical delivery conditions for stainless steel rods, bars, and related long products for general purposes. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X11CrNiMnN19-8-6 stainless steel rods and bars. Our products are sourced from approved mills and supplied in full compliance with EN 10088-3 specifications, ensuring consistent chemical composition, controlled mechanical properties, and precise dimensional accuracy. Forms of Supply: Round bar, hex bar, square bar, rectangular bar, flat bar, rod Explanation of Designation (X11CrNiMnN19-8-6): • X – High-alloy steel • 11 – Approx. 0.11% carbon content • CrNiMnN19-8-6 – Approx. 19% chromium, 8% nickel, with manganese and nitrogen addition Chemical Composition (% – typical limits): • Carbon (C): ≤ 0.15 • Chromium (Cr): 18.0 – 20.0 • Nickel (Ni): 7.0 – 9.0 • Manganese (Mn): 5.0 – 7.0 • Nitrogen (N): 0.15 – 0.30 • Silicon (Si): ≤ 1.00 • Phosphorus (P): ≤ 0.040 • Sulphur (S): ≤ 0.015 Mechanical Properties (Typical, depending on condition): • Tensile Strength: 700 – 900 MPa • Yield Strength: ≥ 450 MPa • Elongation: 30 – 40% • Hardness: Typically 180 – 240 HB Key Features: • Nitrogen-alloyed austenitic stainless steel with high strength • Excellent toughness and ductility • Good resistance to general corrosion • Non-magnetic in annealed condition • Good formability and weldability • Suitable for high-load structural applications Material Characteristics: EN 10088-3 X11CrNiMnN19-8-6 stainless steel rod and bar offers a superior combination of strength, toughness, and corrosion resistance. Nitrogen strengthening allows thinner sections and weight reduction while maintaining excellent mechanical performance. Applications: • Structural and load-bearing components • Shafts, fasteners, and machined parts • Pressure vessels and engineering equipment • Chemical and process industry components • Construction and industrial assemblies Conclusion: Ladhani Metal Corporation supplies high-quality EN 10088-3 X11CrNiMnN19-8-6 stainless steel rods and bars in round, hex, square, rectangular, flat, and rod forms. With enhanced strength, good corrosion resistance, and reliable toughness, X11CrNiMnN19-8-6 stainless steel bar is a dependable solution for demanding engineering and structural applications. For size availability or technical support, contact Ladhani Metal Corporation. #EN10088 #EN100883 #EN100883Steel #EN10088StainlessSteel #StainlessSteel #EuropeanStainlessSteel #ENStandardStainlessSteel #EN10088Supplier #EN10088Manufacturer #EN10088Stockist #EN10088Exporter #StainlessSteelBars #StainlessSteelRods #StainlessSteelWire #StainlessSteelBrightBar #SSRoundBar #SSFlatBar #SSHexBar #SSSquareBar #AusteniticStainlessSteel #FerriticStainlessSteel #MartensiticStainlessSteel #DuplexStainlessSteel #304StainlessSteel #304LStainlessSteel #316StainlessSteel #316LStainlessSteel #2205Duplex #StainlessSteelManufacturers #StainlessSteelSuppliers #StainlessSteelStockist #StainlessSteelExporters #IndianStainlessSteel #SSStockist #SSExporter #SteelIndustry #MetalIndustry #EngineeringSteel #IndustrialSteel #CorrosionResistantSteel #HighStrengthStainlessSteel #WeldableStainlessSteel #MachiningSteel #BrightBars #SteelBars #SteelRods #SteelWire #InfrastructureSteel #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar

EN 10088-3 X1CrNiSi18-15-4 is a high-alloy austenitic stainless steel grade characterized by excellent oxidation resistance, good corrosion resistance, and stable mechanical properties at elevated temperatures. The addition of silicon significantly enhances resistance to scaling and oxidation, making this grade suitable for high-temperature and thermal cycling applications. Supplied in rod and bar form, X1CrNiSi18-15-4 stainless steel is widely used in industrial and engineering components exposed to heat, corrosive gases, and demanding service conditions. This grade conforms to the EN 10088-3 standard, which specifies technical delivery conditions for stainless steel rods, bars, and related long products for general purposes. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X1CrNiSi18-15-4 stainless steel rods and bars. Our materials are sourced from approved mills and supplied in full compliance with EN 10088-3 specifications, ensuring consistent chemical composition, controlled mechanical properties, and dimensional accuracy. Forms of Supply: Round bar, hex bar, square bar, rectangular bar, flat bar, rod Explanation of Designation (X1CrNiSi18-15-4): • X – High-alloy steel • 1 – Approx. 0.01% carbon content • CrNiSi18-15-4 – Approx. 18% chromium, 15% nickel, and 4% silicon Chemical Composition (% – typical limits): • Carbon (C): ≤ 0.03 • Chromium (Cr): 17.0 – 19.0 • Nickel (Ni): 14.0 – 16.0 • Silicon (Si): 3.0 – 4.5 • Manganese (Mn): ≤ 2.00 • Phosphorus (P): ≤ 0.040 • Sulphur (S): ≤ 0.015 Mechanical Properties (Typical, depending on condition): • Tensile Strength: 500 – 700 MPa • Yield Strength: ≥ 200 MPa • Elongation: 35 – 45% • Hardness: Typically 160 – 220 HB Key Features: • Austenitic stainless steel with high silicon content • Excellent oxidation and scaling resistance at elevated temperatures • Good corrosion resistance in many environments • High toughness and ductility • Non-magnetic in annealed condition • Suitable for continuous high-temperature service Material Characteristics: EN 10088-3 X1CrNiSi18-15-4 stainless steel rod and bar offers reliable performance in high-temperature and oxidizing environments. Its silicon-enhanced alloy design ensures resistance to scaling and thermal degradation while maintaining good mechanical strength. Applications: • Furnace components and heat treatment fixtures • Exhaust systems and thermal equipment • Chemical processing and petrochemical equipment • Power generation and industrial heaters • High-temperature engineering components Conclusion: Ladhani Metal Corporation supplies premium quality EN 10088-3 X1CrNiSi18-15-4 stainless steel rods and bars in round, hex, square, rectangular, flat, and rod forms. With excellent oxidation resistance, good corrosion performance, and stable high-temperature properties, X1CrNiSi18-15-4 stainless steel rod is an ideal choice for demanding thermal and industrial applications. For size availability or technical assistance, contact Ladhani Metal Corporation. #EN10088 #EN100883 #EN100883Steel #EN10088StainlessSteel #StainlessSteel #EuropeanStainlessSteel #ENStandardStainlessSteel #EN10088Supplier #EN10088Manufacturer #EN10088Stockist #EN10088Exporter #StainlessSteelBars #StainlessSteelRods #StainlessSteelWire #StainlessSteelBrightBar #SSRoundBar #SSFlatBar #SSHexBar #SSSquareBar #AusteniticStainlessSteel #FerriticStainlessSteel #MartensiticStainlessSteel #DuplexStainlessSteel #304StainlessSteel #304LStainlessSteel #316StainlessSteel #316LStainlessSteel #2205Duplex #StainlessSteelManufacturers #StainlessSteelSuppliers #StainlessSteelStockist #StainlessSteelExporters #IndianStainlessSteel #SSStockist #SSExporter #SteelIndustry #MetalIndustry #EngineeringSteel #IndustrialSteel #CorrosionResistantSteel #HighStrengthStainlessSteel #WeldableStainlessSteel #MachiningSteel #BrightBars #SteelBars #SteelRods #SteelWire #InfrastructureSteel #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar

EN 10088-3 X5CrNi17-7 is a precipitation-hardening stainless steel grade that offers a unique combination of high strength, good corrosion resistance, and excellent fatigue properties. With balanced chromium and nickel content, this grade can be strengthened through suitable heat treatment, making it ideal for applications requiring higher mechanical strength than conventional austenitic stainless steels. Supplied in rod and bar form, X5CrNi17-7 stainless steel is widely used in engineering and industrial applications where strength, corrosion resistance, and dimensional stability are critical. This grade conforms to the EN 10088-3 standard, which specifies technical delivery conditions for stainless steel rods, bars, and related long products for general purposes. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X5CrNi17-7 stainless steel rods and bars. Our materials are sourced from approved mills and supplied in full compliance with EN 10088-3 specifications, ensuring consistent chemical composition, controlled mechanical properties, and dimensional accuracy. Forms of Supply: Round bar, hex bar, square bar, rectangular bar, flat bar, rod Explanation of Designation (X5CrNi17-7): • X – High-alloy steel • 5 – Approx. 0.05% carbon content • CrNi17-7 – Approx. 17% chromium and 7% nickel Chemical Composition (% – typical limits): • Carbon (C): ≤ 0.07 • Chromium (Cr): 16.0 – 18.0 • Nickel (Ni): 6.5 – 7.8 • Aluminium (Al): 0.75 – 1.50 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 1.00 • Phosphorus (P): ≤ 0.040 • Sulphur (S): ≤ 0.015 Mechanical Properties (Typical, depending on condition): • Tensile Strength: 900 – 1,200 MPa • Yield Strength: ≥ 700 MPa • Elongation: 6 – 12% • Hardness: Can be significantly increased by precipitation hardening Key Features: • Precipitation-hardening stainless steel • High strength and good fatigue resistance • Good corrosion resistance in many environments • Excellent dimensional stability after heat treatment • Suitable for high-performance spring and structural components Material Characteristics: EN 10088-3 X5CrNi17-7 stainless steel rod and bar combines high strength with good corrosion resistance and fatigue performance. Its precipitation-hardening capability allows it to meet demanding mechanical requirements while maintaining dimensional accuracy. Applications: • Springs and spring components • Shafts and precision mechanical parts • Aerospace and automotive components • Fasteners and high-strength fittings • Industrial and engineering assemblies Conclusion: Ladhani Metal Corporation supplies high-quality EN 10088-3 X5CrNi17-7 stainless steel rods and bars in round, hex, square, rectangular, flat, and rod forms. With high strength, good corrosion resistance, and excellent fatigue properties, X5CrNi17-7 stainless steel bar is a reliable choice for demanding engineering and industrial applications. For size availability or technical support, contact Ladhani Metal Corporation. #EN10088 #EN100883 #EN100883Steel #EN10088StainlessSteel #StainlessSteel #EuropeanStainlessSteel #ENStandardStainlessSteel #EN10088Supplier #EN10088Manufacturer #EN10088Stockist #EN10088Exporter #StainlessSteelBars #StainlessSteelRods #StainlessSteelWire #StainlessSteelBrightBar #SSRoundBar #SSFlatBar #SSHexBar #SSSquareBar #AusteniticStainlessSteel #FerriticStainlessSteel #MartensiticStainlessSteel #DuplexStainlessSteel #304StainlessSteel #304LStainlessSteel #316StainlessSteel #316LStainlessSteel #2205Duplex #StainlessSteelManufacturers #StainlessSteelSuppliers #StainlessSteelStockist #StainlessSteelExporters #IndianStainlessSteel #SSStockist #SSExporter #SteelIndustry #MetalIndustry #EngineeringSteel #IndustrialSteel #CorrosionResistantSteel #HighStrengthStainlessSteel #WeldableStainlessSteel #MachiningSteel #BrightBars #SteelBars #SteelRods #SteelWire #InfrastructureSteel #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar

EN 10088-3 X3CrNiMo13-4 is a low-carbon martensitic–austenitic (martensitic stainless steel with nickel and molybdenum) grade offering high strength, excellent toughness, and improved corrosion resistance compared to standard martensitic steels. The addition of nickel enhances toughness, while molybdenum improves resistance to pitting and crevice corrosion. Supplied in rod and bar form, X3CrNiMo13-4 stainless steel is widely used in demanding engineering and industrial applications requiring a combination of strength, corrosion resistance, and weldability. This grade conforms to the EN 10088-3 standard, which specifies technical delivery conditions for stainless steel rods, bars, and related long products for general purposes. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X3CrNiMo13-4 stainless steel rods and bars. Our materials are sourced from approved mills and supplied in full compliance with EN 10088-3 specifications, ensuring consistent chemical composition, controlled mechanical properties, and dimensional accuracy. Forms of Supply: Round bar, hex bar, square bar, rectangular bar, flat bar, rod Explanation of Designation (X3CrNiMo13-4): • X – High-alloy steel • 3 – Approx. 0.03% carbon content • CrNiMo13-4 – Approx. 13% chromium, 4% nickel, with molybdenum addition Chemical Composition (% – typical limits): • Carbon (C): ≤ 0.05 • Chromium (Cr): 12.0 – 14.0 • Nickel (Ni): 3.5 – 4.5 • Molybdenum (Mo): 0.4 – 0.7 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 1.00 • Phosphorus (P): ≤ 0.040 • Sulphur (S): ≤ 0.015 Mechanical Properties (Typical, depending on heat treatment): • Tensile Strength: 800 – 1,000 MPa • Yield Strength: ≥ 650 MPa • Elongation: 15 – 18% • Hardness: Can be adjusted by quenching and tempering Key Features: • High-strength martensitic stainless steel with nickel and molybdenum • Improved corrosion resistance compared to standard martensitic grades • Excellent toughness, even at lower temperatures • Good weldability with proper procedures • Heat-treatable to achieve a wide range of mechanical properties • Suitable for critical engineering components Material Characteristics: EN 10088-3 X3CrNiMo13-4 stainless steel rod and bar combines high mechanical strength with good corrosion resistance and toughness. Its balanced alloying ensures reliable performance under high stress, dynamic loads, and moderately corrosive environments. Applications: • Hydraulic and mechanical shafts • Pump and valve components • Turbine parts and power generation equipment • Marine and offshore components • Heavy engineering and industrial machinery Conclusion: Ladhani Metal Corporation supplies premium quality EN 10088-3 X3CrNiMo13-4 stainless steel rods and bars in round, hex, square, rectangular, flat, and rod forms. With high strength, excellent toughness, and enhanced corrosion resistance, X3CrNiMo13-4 stainless steel rod is a dependable solution for demanding industrial and engineering applications. For size availability or technical assistance, contact Ladhani Metal Corporation. #EN10088 #EN100883 #EN100883Steel #EN10088StainlessSteel #StainlessSteel #EuropeanStainlessSteel #ENStandardStainlessSteel #EN10088Supplier #EN10088Manufacturer #EN10088Stockist #EN10088Exporter #StainlessSteelBars #StainlessSteelRods #StainlessSteelWire #StainlessSteelBrightBar #SSRoundBar #SSFlatBar #SSHexBar #SSSquareBar #AusteniticStainlessSteel #FerriticStainlessSteel #MartensiticStainlessSteel #DuplexStainlessSteel #304StainlessSteel #304LStainlessSteel #316StainlessSteel #316LStainlessSteel #2205Duplex #StainlessSteelManufacturers #StainlessSteelSuppliers #StainlessSteelStockist #StainlessSteelExporters #IndianStainlessSteel #SSStockist #SSExporter #SteelIndustry #MetalIndustry #EngineeringSteel #IndustrialSteel #CorrosionResistantSteel #HighStrengthStainlessSteel #WeldableStainlessSteel #MachiningSteel #BrightBars #SteelBars #SteelRods #SteelWire #InfrastructureSteel #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar

EN 10088-3 X10CrNi18-8 is an austenitic stainless steel grade offering excellent corrosion resistance, good mechanical strength, and high toughness. With balanced chromium and nickel content, this grade provides reliable performance in oxidizing and mildly corrosive environments. Supplied in rod and bar form, X10CrNi18-8 stainless steel is widely used in engineering, fabrication, and industrial applications where formability, weldability, and corrosion resistance are essential. This grade conforms to the EN 10088-3 standard, which specifies technical delivery conditions for stainless steel rods, bars, and related long products for general purposes. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X10CrNi18-8 stainless steel rods and bars. Our materials are sourced from approved mills and supplied in full compliance with EN 10088-3 specifications, ensuring consistent chemical composition, dimensional accuracy, and reliable performance. Forms of Supply: Round bar, hex bar, square bar, rectangular bar, flat bar, rod Explanation of Designation (X10CrNi18-8): • X – High-alloy steel • 10 – Approx. 0.10% carbon content • CrNi18-8 – Approx. 18% chromium and 8% nickel Chemical Composition (% – typical limits): • Carbon (C): ≤ 0.15 • Chromium (Cr): 17.0 – 19.0 • Nickel (Ni): 7.5 – 9.5 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 2.00 • Phosphorus (P): ≤ 0.045 • Sulphur (S): ≤ 0.030 Mechanical Properties (Typical, depending on condition): • Tensile Strength: 500 – 750 MPa • Yield Strength: ≥ 210 MPa • Elongation: 40 – 45% • Hardness: Typically 160 – 220 HB Key Features: • Austenitic stainless steel with good corrosion resistance • Excellent formability and weldability • High toughness over a wide temperature range • Non-magnetic in annealed condition • Suitable for machined and fabricated bar components Material Characteristics: EN 10088-3 X10CrNi18-8 stainless steel rod and bar provides a combination of corrosion resistance, strength, and ductility. Its austenitic structure ensures stable performance in demanding industrial and fabrication environments. Applications: • Shafts, fasteners, and machined components • Food processing and dairy equipment • Chemical and process industry components • Architectural and structural applications • General engineering and fabrication Conclusion: Ladhani Metal Corporation supplies high-quality EN 10088-3 X10CrNi18-8 stainless steel rods and bars in round, hex, square, rectangular, flat, and rod forms. With reliable corrosion resistance, good mechanical properties, and excellent fabricability, X10CrNi18-8 stainless steel bar is a dependable choice for industrial and engineering applications. For size availability or technical assistance, contact Ladhani Metal Corporation. #EN10088 #EN100883 #EN100883Steel #EN10088StainlessSteel #StainlessSteel #EuropeanStainlessSteel #ENStandardStainlessSteel #EN10088Supplier #EN10088Manufacturer #EN10088Stockist #EN10088Exporter #StainlessSteelBars #StainlessSteelRods #StainlessSteelWire #StainlessSteelBrightBar #SSRoundBar #SSFlatBar #SSHexBar #SSSquareBar #AusteniticStainlessSteel #FerriticStainlessSteel #MartensiticStainlessSteel #DuplexStainlessSteel #304StainlessSteel #304LStainlessSteel #316StainlessSteel #316LStainlessSteel #2205Duplex #StainlessSteelManufacturers #StainlessSteelSuppliers #StainlessSteelStockist #StainlessSteelExporters #IndianStainlessSteel #SSStockist #SSExporter #SteelIndustry #MetalIndustry #EngineeringSteel #IndustrialSteel #CorrosionResistantSteel #HighStrengthStainlessSteel #WeldableStainlessSteel #MachiningSteel #BrightBars #SteelBars #SteelRods #SteelWire #InfrastructureSteel #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar

EN 10088-3 X2CrNi19-11 is a low-carbon austenitic stainless steel grade known for excellent corrosion resistance, very good weldability, and high toughness. Due to its low carbon content, this grade offers improved resistance to intergranular corrosion, making it suitable for welded constructions and corrosive environments. Supplied in rod and bar form, X2CrNi19-11 stainless steel is widely used in industrial, engineering, and fabrication applications where durability, hygiene, and corrosion resistance are critical. This grade conforms to the EN 10088-3 standard, which specifies technical delivery conditions for stainless steel rods, bars, and related long products for general purposes. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X2CrNi19-11 stainless steel rods and bars. Our materials are sourced from approved mills and supplied in compliance with EN 10088-3 requirements, ensuring consistent chemical composition, dimensional accuracy, and reliable performance. Forms of Supply: Round bar, hex bar, square bar, rectangular bar, flat bar, rod Explanation of Designation (X2CrNi19-11): • X – High-alloy steel • 2 – Approx. 0.02% carbon content • CrNi19-11 – Approx. 19% chromium and 11% nickel Chemical Composition (% – typical limits): • Carbon (C): ≤ 0.03 • Chromium (Cr): 18.0 – 20.0 • Nickel (Ni): 10.0 – 12.0 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 2.00 • Phosphorus (P): ≤ 0.040 • Sulphur (S): ≤ 0.015 Mechanical Properties (Typical, depending on condition): • Tensile Strength: 500 – 700 MPa • Yield Strength: ≥ 200 MPa • Elongation: 40 – 50% • Hardness: Typically 160 – 220 HB Key Features: • Low-carbon austenitic stainless steel • Excellent corrosion resistance in a wide range of environments • Very good weldability without risk of intergranular corrosion • High toughness and ductility • Non-magnetic in annealed condition • Suitable for hygienic and corrosive service applications Material Characteristics: EN 10088-3 X2CrNi19-11 stainless steel rod and bar provides excellent resistance to corrosion, high toughness, and stable mechanical properties. Its low-carbon austenitic structure ensures reliable performance in welded and corrosive industrial environments. Applications: • Chemical and petrochemical equipment • Food processing and dairy equipment • Pharmaceutical and medical components • Shafts, fasteners, and machined parts • Architectural and structural applications Conclusion: Ladhani Metal Corporation supplies high-quality EN 10088-3 X2CrNi19-11 stainless steel rods and bars in round, hex, square, rectangular, flat, and rod forms. With superior corrosion resistance, excellent weldability, and dependable mechanical properties, X2CrNi19-11 stainless steel rod is an ideal choice for demanding industrial and engineering applications. For size availability or technical assistance, contact Ladhani Metal Corporation. #EN10088 #EN100883 #EN100883Steel #EN10088StainlessSteel #StainlessSteel #EuropeanStainlessSteel #ENStandardStainlessSteel #EN10088Supplier #EN10088Manufacturer #EN10088Stockist #EN10088Exporter #StainlessSteelBars #StainlessSteelRods #StainlessSteelWire #StainlessSteelBrightBar #SSRoundBar #SSFlatBar #SSHexBar #SSSquareBar #AusteniticStainlessSteel #FerriticStainlessSteel #MartensiticStainlessSteel #DuplexStainlessSteel #304StainlessSteel #304LStainlessSteel #316StainlessSteel #316LStainlessSteel #2205Duplex #StainlessSteelManufacturers #StainlessSteelSuppliers #StainlessSteelStockist #StainlessSteelExporters #IndianStainlessSteel #SSStockist #SSExporter #SteelIndustry #MetalIndustry #EngineeringSteel #IndustrialSteel #CorrosionResistantSteel #HighStrengthStainlessSteel #WeldableStainlessSteel #MachiningSteel #BrightBars #SteelBars #SteelRods #SteelWire #InfrastructureSteel #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar

EN 10088-3 X4CrNi18-12 is a low-carbon austenitic stainless steel grade offering excellent corrosion resistance, good strength, and outstanding toughness. With high chromium and nickel content, this grade provides reliable performance in oxidizing and mildly aggressive environments. Supplied in rod and bar form, X4CrNi18-12 stainless steel is widely used in engineering and industrial components where durability, formability, and corrosion resistance are essential. This grade conforms to the EN 10088-3 standard, which specifies technical delivery conditions for stainless steel rods, bars, and related long products for general purposes. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X4CrNi18-12 stainless steel rods and bars. Our materials are sourced from approved mills and supplied in full compliance with EN 10088-3 specifications, ensuring consistent chemical composition, precise dimensions, controlled mechanical properties, and reliable performance. Forms of Supply: Round bar, hex bar, square bar, rectangular bar, flat bar, rod Explanation of Designation (X4CrNi18-12): • X – High-alloy steel • 4 – Approx. 0.04% carbon content • CrNi18-12 – Approx. 18% chromium and 12% nickel Chemical Composition (% – typical limits): • Carbon (C): ≤ 0.08 • Chromium (Cr): 17.0 – 19.0 • Nickel (Ni): 10.5 – 13.0 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 2.00 • Phosphorus (P): ≤ 0.040 • Sulphur (S): ≤ 0.015 Mechanical Properties (Typical, depending on condition): • Tensile Strength: 500 – 700 MPa • Yield Strength: ≥ 200 MPa • Elongation: 40 – 50% • Hardness: Typically 160 – 220 HB Key Features: • Austenitic stainless steel with excellent corrosion resistance • Good toughness and ductility at low and high temperatures • Non-magnetic in annealed condition • Good formability and weldability • Suitable for rods and bars requiring high corrosion resistance Material Characteristics: EN 10088-3 X4CrNi18-12 stainless steel rod and bar provides excellent corrosion resistance, high toughness, and good mechanical properties. Its austenitic structure ensures stable performance in demanding industrial and corrosive environments. Applications: • Shafts, spindles, and axles • Pump and valve components • Chemical and process equipment • Food processing equipment • Marine and general engineering components Conclusion: Ladhani Metal Corporation supplies high-quality EN 10088-3 X4CrNi18-12 stainless steel rods and bars in round, hex, square, rectangular, flat, and rod forms. With excellent corrosion resistance, toughness, and versatility, X4CrNi18-12 stainless steel bar is a dependable choice for industrial and engineering applications. For size availability or technical support, contact Ladhani Metal Corporation. #EN10088 #EN100883 #EN100883Steel #EN10088StainlessSteel #StainlessSteel #EuropeanStainlessSteel #ENStandardStainlessSteel #EN10088Supplier #EN10088Manufacturer #EN10088Stockist #EN10088Exporter #StainlessSteelBars #StainlessSteelRods #StainlessSteelWire #StainlessSteelBrightBar #SSRoundBar #SSFlatBar #SSHexBar #SSSquareBar #AusteniticStainlessSteel #FerriticStainlessSteel #MartensiticStainlessSteel #DuplexStainlessSteel #304StainlessSteel #304LStainlessSteel #316StainlessSteel #316LStainlessSteel #2205Duplex #StainlessSteelManufacturers #StainlessSteelSuppliers #StainlessSteelStockist #StainlessSteelExporters #IndianStainlessSteel #SSStockist #SSExporter #SteelIndustry #MetalIndustry #EngineeringSteel #IndustrialSteel #CorrosionResistantSteel #HighStrengthStainlessSteel #WeldableStainlessSteel #MachiningSteel #BrightBars #SteelBars #SteelRods #SteelWire #InfrastructureSteel #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar

EN 10088-3 X105CrMo17 is a very high-carbon martensitic stainless steel grade developed for applications requiring extremely high hardness, outstanding wear resistance, and good corrosion resistance. The presence of chromium and molybdenum enhances hardenability and corrosion performance, making this grade suitable for demanding mechanical and cutting applications. Supplied in rod and bar form, X105CrMo17 stainless steel is widely used in precision and heavy-duty industrial components. This grade conforms to the EN 10088-3 standard, which specifies technical delivery conditions for stainless steel rods, bars, and related long products for general purposes. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X105CrMo17 stainless steel rods and bars. Our materials are sourced from approved mills and supplied in full compliance with EN 10088-3 specifications, ensuring consistent chemical composition, precise dimensions, controlled mechanical properties, and reliable performance. Forms of Supply: Round bar, hex bar, square bar, rectangular bar, flat bar, rod Explanation of Designation (X105CrMo17): • X – High-alloy steel • 105 – Approx. 1.05% carbon content • CrMo17 – Approx. 17% chromium with molybdenum addition Chemical Composition (% – typical limits): • Carbon (C): 0.95 – 1.10 • Chromium (Cr): 16.0 – 18.0 • Molybdenum (Mo): 0.50 – 0.80 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 1.00 • Phosphorus (P): ≤ 0.040 • Sulphur (S): ≤ 0.015 Mechanical Properties (Typical, depending on heat treatment): • Tensile Strength: 800 – 1,000 MPa • Yield Strength: ≥ 600 MPa • Elongation: 5 – 10% • Hardness: Can be extremely high after quenching and tempering Key Features: • Very high-carbon martensitic stainless steel • Exceptional hardness and wear resistance • Good corrosion resistance for a high-carbon grade • Excellent edge retention and cutting performance • Heat-treatable for maximum strength and hardness • Suitable for precision rods and high-wear components Material Characteristics: EN 10088-3 X105CrMo17 stainless steel rod and bar provides extremely high hardness, superior wear resistance, and strong mechanical performance. Its martensitic structure allows deep hardening, making it ideal for components exposed to severe abrasion, cutting loads, and mechanical stress. Applications: • Industrial knives and cutting tools • Blades, shear knives, and wear parts • Shafts and precision mechanical components • Pump and valve components • Machine parts requiring extreme wear resistance • Industrial tools and heavy-duty assemblies Conclusion: Ladhani Metal Corporation supplies high-quality EN 10088-3 X105CrMo17 stainless steel rods and bars in round, hex, square, rectangular, flat, and rod forms. With extremely high hardness, outstanding wear resistance, and reliable corrosion performance, X105CrMo17 stainless steel rod is an excellent choice for demanding industrial and engineering applications. For size availability or technical support, contact Ladhani Metal Corporation. #EN10088 #EN100883 #EN100883Steel #EN10088StainlessSteel #StainlessSteel #EuropeanStainlessSteel #ENStandardStainlessSteel #EN10088Supplier #EN10088Manufacturer #EN10088Stockist #EN10088Exporter #StainlessSteelBars #StainlessSteelRods #StainlessSteelWire #StainlessSteelBrightBar #SSRoundBar #SSFlatBar #SSHexBar #SSSquareBar #AusteniticStainlessSteel #FerriticStainlessSteel #MartensiticStainlessSteel #DuplexStainlessSteel #304StainlessSteel #304LStainlessSteel #316StainlessSteel #316LStainlessSteel #2205Duplex #StainlessSteelManufacturers #StainlessSteelSuppliers #StainlessSteelStockist #StainlessSteelExporters #IndianStainlessSteel #SSStockist #SSExporter #SteelIndustry #MetalIndustry #EngineeringSteel #IndustrialSteel #CorrosionResistantSteel #HighStrengthStainlessSteel #WeldableStainlessSteel #MachiningSteel #BrightBars #SteelBars #SteelRods #SteelWire #InfrastructureSteel #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar

EN 10088-3 X39CrMo17-1 is a high-carbon martensitic stainless steel grade designed for applications requiring very high hardness, excellent wear resistance, and good corrosion resistance. The addition of molybdenum improves hardenability and enhances resistance to pitting and corrosion in mildly aggressive environments. Supplied in rod and bar form, X39CrMo17-1 stainless steel is widely used in engineering and industrial components where strength, durability, and cutting performance are critical. This grade conforms to the EN 10088-3 standard, which specifies technical delivery conditions for stainless steel rods, bars, and related long products for general purposes. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X39CrMo17-1 stainless steel rods and bars. Our materials are sourced from approved mills and supplied in full compliance with EN 10088-3 specifications, ensuring consistent chemical composition, precise dimensions, controlled mechanical properties, and reliable performance. Forms of Supply: Round bar, hex bar, square bar, rectangular bar, flat bar, rod Explanation of Designation (X39CrMo17-1): • X – High-alloy steel • 39 – Approx. 0.39% carbon content • CrMo17-1 – Approx. 17% chromium and 1% molybdenum Chemical Composition (% – typical limits): • Carbon (C): 0.36 – 0.42 • Chromium (Cr): 16.0 – 18.0 • Molybdenum (Mo): 0.80 – 1.20 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 1.00 • Phosphorus (P): ≤ 0.040 • Sulphur (S): ≤ 0.015 • Nickel (Ni): ≤ 0.50 Mechanical Properties (Typical, depending on heat treatment): • Tensile Strength: 750 – 950 MPa • Yield Strength: ≥ 500 MPa • Elongation: 8 – 12% • Hardness: Can be significantly increased by quenching and tempering Key Features: • High-carbon martensitic stainless steel • Excellent hardness and wear resistance after heat treatment • Improved corrosion resistance due to molybdenum • Heat-treatable for high strength and cutting performance • Suitable for heavy-duty rods and bars • Available in multiple bar and rod shapes Material Characteristics: EN 10088-3 X39CrMo17-1 stainless steel rod and bar offers very high hardness, excellent wear resistance, and strong mechanical performance. Its martensitic structure allows deep hardening through heat treatment, making it suitable for components exposed to heavy mechanical stress, abrasion, and moderately corrosive environments. Applications: • Cutting tools and industrial blades • Shafts, spindles, and axles • Pump and valve components • Machine parts and engineering components • Fasteners, pins, and precision parts • Industrial tools and mechanical assemblies Conclusion: Ladhani Metal Corporation supplies high-quality EN 10088-3 X39CrMo17-1 stainless steel rods and bars in round, hex, square, rectangular, flat, and rod forms. With excellent hardness, wear resistance, and reliable corrosion performance, X39CrMo17-1 stainless steel is a dependable choice for demanding industrial and engineering applications. For size availability or technical support, contact Ladhani Metal Corporation. #EN10088 #EN100883 #EN100883Steel #EN10088StainlessSteel #StainlessSteel #EuropeanStainlessSteel #ENStandardStainlessSteel #EN10088Supplier #EN10088Manufacturer #EN10088Stockist #EN10088Exporter #StainlessSteelBars #StainlessSteelRods #StainlessSteelWire #StainlessSteelBrightBar #SSRoundBar #SSFlatBar #SSHexBar #SSSquareBar #AusteniticStainlessSteel #FerriticStainlessSteel #MartensiticStainlessSteel #DuplexStainlessSteel #304StainlessSteel #304LStainlessSteel #316StainlessSteel #316LStainlessSteel #2205Duplex #StainlessSteelManufacturers #StainlessSteelSuppliers #StainlessSteelStockist #StainlessSteelExporters #IndianStainlessSteel #SSStockist #SSExporter #SteelIndustry #MetalIndustry #EngineeringSteel #IndustrialSteel #CorrosionResistantSteel #HighStrengthStainlessSteel #WeldableStainlessSteel #MachiningSteel #BrightBars #SteelBars #SteelRods #SteelWire #InfrastructureSteel #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar

EN 10088-3 X6CrMo17-1 is a low-carbon martensitic stainless steel grade offering excellent corrosion resistance, good strength, and improved resistance to pitting and crevice corrosion due to the addition of molybdenum. Supplied in rod and bar form, X6CrMo17-1 stainless steel is widely used in engineering and industrial components where durability, corrosion resistance, and reliable mechanical performance are required. This grade conforms to the EN 10088-3 standard, which specifies technical delivery conditions for stainless steel rods, bars, and related long products for general purposes. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X6CrMo17-1 stainless steel rods and bars. Our materials are sourced from approved mills and supplied in full compliance with EN 10088-3 specifications, ensuring consistent chemical composition, precise dimensions, controlled mechanical properties, and dependable performance. Forms of Supply: Round bar, hex bar, square bar, rectangular bar, flat bar, rod Explanation of Designation (X6CrMo17-1): • X – High-alloy steel • 6 – Approx. 0.06% carbon content • CrMo17-1 – Approx. 17% chromium and 1% molybdenum Chemical Composition (% – typical limits): • Carbon (C): ≤ 0.08 • Chromium (Cr): 16.0 – 18.0 • Molybdenum (Mo): 0.80 – 1.20 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 1.50 • Phosphorus (P): ≤ 0.040 • Sulphur (S): ≤ 0.015 • Nickel (Ni): ≤ 0.50 Mechanical Properties (Typical, depending on heat treatment): • Tensile Strength: 600 – 800 MPa • Yield Strength: ≥ 350 MPa • Elongation: 12 – 15% • Hardness: Can be increased by quenching and tempering Key Features: • Low-carbon martensitic stainless steel • Excellent corrosion resistance, including pitting resistance • Good strength and toughness • Heat-treatable for improved mechanical properties • Suitable for precision rods and corrosion-resistant components Material Characteristics: EN 10088-3 X6CrMo17-1 stainless steel rod and bar provides an excellent balance of corrosion resistance and mechanical performance. The molybdenum-enhanced martensitic structure ensures reliable service in corrosive and mechanically demanding environments. Applications: • Shafts, spindles, and axles • Pump and valve components • Chemical and process equipment parts • Marine and offshore components • Precision-engineered rods and mechanical assemblies Conclusion: Ladhani Metal Corporation supplies high-quality EN 10088-3 X6CrMo17-1 stainless steel rods and bars in round, hex, square, rectangular, flat, and rod forms. With excellent corrosion resistance, good mechanical strength, and heat-treatable properties, X6CrMo17-1 stainless steel rod is a dependable solution for industrial and engineering applications. For size availability or technical support, contact Ladhani Metal Corporation. #EN10088 #EN100883 #EN100883Steel #EN10088StainlessSteel #StainlessSteel #EuropeanStainlessSteel #ENStandardStainlessSteel #EN10088Supplier #EN10088Manufacturer #EN10088Stockist #EN10088Exporter #StainlessSteelBars #StainlessSteelRods #StainlessSteelWire #StainlessSteelBrightBar #SSRoundBar #SSFlatBar #SSHexBar #SSSquareBar #AusteniticStainlessSteel #FerriticStainlessSteel #MartensiticStainlessSteel #DuplexStainlessSteel #304StainlessSteel #304LStainlessSteel #316StainlessSteel #316LStainlessSteel #2205Duplex #StainlessSteelManufacturers #StainlessSteelSuppliers #StainlessSteelStockist #StainlessSteelExporters #IndianStainlessSteel #SSStockist #SSExporter #SteelIndustry #MetalIndustry #EngineeringSteel #IndustrialSteel #CorrosionResistantSteel #HighStrengthStainlessSteel #WeldableStainlessSteel #MachiningSteel #BrightBars #SteelBars #SteelRods #SteelWire #InfrastructureSteel #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar

EN 10088-3 X55CrMo14 is a high-carbon martensitic stainless steel grade designed for applications requiring very high hardness, excellent wear resistance, and good corrosion resistance. The addition of molybdenum improves hardenability and corrosion resistance, particularly in mildly aggressive environments. Supplied in rod and bar form, X55CrMo14 stainless steel is widely used in engineering and industrial components where durability, cutting performance, and mechanical strength are critical. This grade conforms to the EN 10088-3 standard, which specifies technical delivery conditions for stainless steel rods, bars, and related long products for general purposes. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10088-3 X55CrMo14 stainless steel rods and bars. Our materials are sourced from approved mills and supplied in full compliance with EN 10088-3 specifications, ensuring consistent chemical composition, precise dimensions, controlled mechanical properties, and reliable performance. Forms of Supply: Round bar, hex bar, square bar, rectangular bar, flat bar, rod Explanation of Designation (X55CrMo14): • X – High-alloy steel • 55 – Approx. 0.55% carbon content • CrMo14 – Approx. 14% chromium with molybdenum addition Chemical Composition (% – typical limits): • Carbon (C): 0.48 – 0.60 • Chromium (Cr): 14.0 – 15.0 • Molybdenum (Mo): 0.50 – 0.80 • Silicon (Si): ≤ 1.00 • Manganese (Mn): ≤ 1.00 • Phosphorus (P): ≤ 0.040 • Sulphur (S): ≤ 0.015 Mechanical Properties (Typical, depending on heat treatment): • Tensile Strength: 750 – 950 MPa • Yield Strength: ≥ 500 MPa • Elongation: 8 – 12% • Hardness: Can be significantly increased by quenching and tempering Key Features: • High-carbon martensitic stainless steel • Excellent hardness and wear resistance after heat treatment • Improved corrosion resistance due to molybdenum • Heat-treatable for high strength and cutting performance • Suitable for precision rods and bars • Available in multiple bar and rod shapes Material Characteristics: EN 10088-3 X55CrMo14 stainless steel rod and bar offers exceptional hardness, wear resistance, and mechanical strength. Its martensitic structure allows deep hardening through heat treatment, making it ideal for components subjected to heavy wear, cutting action, and mechanical stress. Applications: • Cutting tools and industrial blades • Shafts, spindles, and axles • Pump and valve components • Machine parts and engineering components • Fasteners, pins, and precision parts • Industrial tools and mechanical assemblies Conclusion: Ladhani Metal Corporation supplies high-quality EN 10088-3 X55CrMo14 stainless steel rods and bars in round, hex, square, rectangular, flat, and rod forms. With very high hardness, excellent wear resistance, and reliable corrosion performance, X55CrMo14 stainless steel is a dependable choice for demanding industrial and engineering applications. For size availability or technical support, contact Ladhani Metal Corporation. #EN10088 #EN100883 #EN100883Steel #EN10088StainlessSteel #StainlessSteel #EuropeanStainlessSteel #ENStandardStainlessSteel #EN10088Supplier #EN10088Manufacturer #EN10088Stockist #EN10088Exporter #StainlessSteelBars #StainlessSteelRods #StainlessSteelWire #StainlessSteelBrightBar #SSRoundBar #SSFlatBar #SSHexBar #SSSquareBar #AusteniticStainlessSteel #FerriticStainlessSteel #MartensiticStainlessSteel #DuplexStainlessSteel #304StainlessSteel #304LStainlessSteel #316StainlessSteel #316LStainlessSteel #2205Duplex #StainlessSteelManufacturers #StainlessSteelSuppliers #StainlessSteelStockist #StainlessSteelExporters #IndianStainlessSteel #SSStockist #SSExporter #SteelIndustry #MetalIndustry #EngineeringSteel #IndustrialSteel #CorrosionResistantSteel #HighStrengthStainlessSteel #WeldableStainlessSteel #MachiningSteel #BrightBars #SteelBars #SteelRods #SteelWire #InfrastructureSteel #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Trivandrum #Kochi #Mangalore #Goa #Aurangabad #Tirupur #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Vasai #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Nagaur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Surendranagar #Valsad #Bhavnagar