Top EN 10088 SS sheet plate coil strip,EN 10088-3 ss bar & rod,EN 10084 round bars Products in Chennai at best prices

EN 10084 20MoCr3 Round Bars

EN 10084 20MoCr3 is a low alloy molybdenum-chromium carburizing steel grade designed for components requiring a hard, wear-resistant surface combined with a strong and tough core after carburizing and heat treatment. With approximately 0.20% carbon along with molybdenum and chromium additions, this grade offers excellent hardenability, improved core strength, and enhanced resistance to wear and fatigue. Manufactured in accordance with EN 10084, which specifies technical delivery conditions for steels intended for carburizing treatment, 20MoCr3 steel is widely used in automotive, heavy engineering, and power transmission industries. The chromium improves depth of hardening and wear resistance, while molybdenum enhances strength and tempering resistance, ensuring consistent mechanical performance after quenching and tempering. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10084 20MoCr3 round bars, supplied with mill test certificates and strict quality inspection as per European standards. Forms of Supply (as per grade): Hot rolled round bars, Black round bars, Bright round bars, Peeled bars, Turned bars, Ground bars, Forged round bars Explanation of Designation (20MoCr3): • 20 – Approx. 0.20% carbon content • Mo – Molybdenum alloyed steel • Cr – Chromium alloyed steel • 3 – Alloy content classification Chemical Composition (% – typical limits): • Carbon (C): 0.17 – 0.23 • Manganese (Mn): 0.60 – 0.90 • Silicon (Si): ≤ 0.40 • Chromium (Cr): 0.60 – 0.90 • Molybdenum (Mo): 0.15 – 0.30 • Phosphorus (P): ≤ 0.025 • Sulphur (S): ≤ 0.035 Mechanical Properties (Core, typical normalized condition): • Tensile Strength: 850 – 1050 MPa • Yield Strength: ≥ 600 MPa • Elongation: ≥ 9% • Hardness (Core): 220 – 280 HB After carburizing and quenching, the surface hardness can reach approximately 58 – 62 HRC, depending on case depth and heat treatment conditions. Key Features: • Excellent carburizing response • Superior hardenability due to Mo and Cr additions • High core strength with good toughness • Improved resistance to wear and fatigue • Good tempering resistance Material Characteristics: EN 10084 20MoCr3 round bars provide a strong combination of deep case hardening capability and high core strength. The molybdenum addition improves resistance to temper softening, while chromium enhances wear resistance and uniform hardness distribution. Applications: • Heavy-duty gears and gear shafts • Transmission components • Drive shafts and axles • Pinions and sprockets • Automotive drivetrain parts • Industrial machinery components requiring case hardening Conclusion: Ladhani Metal Corporation supplies high-quality EN 10084 20MoCr3 round bars in various diameters and finishes. With enhanced hardenability and strong mechanical properties, 20MoCr3 steel is widely used in automotive and industrial engineering applications requiring durable, case-hardened components. For stock availability, customized sizes, or technical specifications, contact Ladhani Metal Corporation. #EN10084 #EN10084Steel #EN10084Bars #EN10084CarburizingSteel #EN10084CaseHardeningSteel #ENStandardSteel #AlloySteel #CaseHardeningSteel #CarburizingSteel #C10E #C15E #C16E #16MnCr5 #20MnCr5 #18CrNiMo76 #17Cr3 #20MnCrS5 #EngineeringSteelBars #AlloySteelBars #AlloySteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #GearSteel #PinionSteel #ShaftSteel #TransmissionSteel #HeatTreatableSteel #CaseHardenedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #AlloySteelSupplier #EN10084Supplier #EN10084Manufacturer #EN10084Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Bengaluru #Hyderabad #Ahmedabad #Pune #Surat #Jaipur #Lucknow #Kanpur #Nagpur #Indore #Thane #Bhopal #Visakhapatnam #Patna #Vadodara #Ghaziabad #Ludhiana #Coimbatore #Agra #Madurai #Nashik #Faridabad #Meerut #Rajkot #Varanasi #Srinagar #Aurangabad #Dhanbad #Amritsar #NaviMumbai #Allahabad #Ranchi #Howrah #Jabalpur #Gwalior #Vijayawada #Jodhpur #Raipur #Kota #Guwahati #Chandigarh #Solapur #Hubli #Mysuru #Tiruchirappalli #Bareilly

EN 10084 round bars

EN 10084 C10E Round Bars

EN 10084 C10E is a low carbon case hardening steel grade designed for components that require a hard, wear-resistant surface with a tough and ductile core. With a nominal carbon content of approximately 0.10%, this grade is ideal for carburizing applications where surface hardness is developed through heat treatment while maintaining core strength. Manufactured in accordance with EN 10084, which specifies technical delivery conditions for case hardening steels, C10E steel is widely used in automotive and mechanical engineering industries. The low carbon content ensures good formability and weldability before carburizing, while surface carbon enrichment during heat treatment significantly improves wear resistance. Ladhani Metal Corporation is a reliable manufacturer, supplier, and exporter of EN 10084 C10E round bars, supplied with mill test certificates and strict quality inspection as per European standards. Forms of Supply (as per grade): Hot rolled round bars, Black round bars, Bright round bars, Peeled bars, Turned bars, Ground bars, Forged round bars Explanation of Designation (C10E): • C – Carbon steel • 10 – Approx. 0.10% carbon content • E – Special quality steel with controlled sulphur and phosphorus (low impurity level) Chemical Composition (% – typical limits): • Carbon (C): 0.07 – 0.13 • Manganese (Mn): 0.30 – 0.60 • Silicon (Si): ≤ 0.40 • Phosphorus (P): ≤ 0.025 • Sulphur (S): ≤ 0.035 Mechanical Properties (Core, typical normalized condition): • Tensile Strength: 340 – 470 MPa • Yield Strength: ≥ 210 MPa • Elongation: ≥ 27% • Hardness (Core): 100 – 160 HB After carburizing and quenching, the surface hardness can reach approximately 58 – 62 HRC, depending on treatment conditions. Key Features: • Excellent case hardening response • Good machinability in annealed condition • Good weldability before carburizing • Tough and ductile core after heat treatment • Suitable for surface wear-resistant applications Material Characteristics: EN 10084 C10E round bars are primarily used where surface hardness and wear resistance are critical while maintaining a shock-resistant core. The material offers uniform carburizing characteristics and consistent mechanical performance after heat treatment. Applications: • Gears and pinions • Bushings and sleeves • Shafts and spindles • Cam components • Automotive transmission parts • Small mechanical components requiring surface hardness Conclusion: Ladhani Metal Corporation supplies high-quality EN 10084 C10E round bars in various diameters and finishes. With excellent carburizing capability and reliable core toughness, C10E steel is widely used in automotive and general engineering industries. For stock availability, customized sizes, or technical specifications, contact Ladhani Metal Corporation. #EN10084 #EN10084Steel #EN10084Bars #EN10084CarburizingSteel #EN10084CaseHardeningSteel #ENStandardSteel #AlloySteel #CaseHardeningSteel #CarburizingSteel #C10E #C15E #C16E #16MnCr5 #20MnCr5 #18CrNiMo76 #17Cr3 #20MnCrS5 #EngineeringSteelBars #AlloySteelBars #AlloySteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #GearSteel #PinionSteel #ShaftSteel #TransmissionSteel #HeatTreatableSteel #CaseHardenedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #AlloySteelSupplier #EN10084Supplier #EN10084Manufacturer #EN10084Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Bengaluru #Hyderabad #Ahmedabad #Pune #Surat #Jaipur #Lucknow #Kanpur #Nagpur #Indore #Thane #Bhopal #Visakhapatnam #Patna #Vadodara #Ghaziabad #Ludhiana #Coimbatore #Agra #Madurai #Nashik #Faridabad #Meerut #Rajkot #Varanasi #Srinagar #Aurangabad #Dhanbad #Amritsar #NaviMumbai #Allahabad #Ranchi #Howrah #Jabalpur #Gwalior #Vijayawada #Jodhpur #Raipur #Kota #Guwahati #Chandigarh #Solapur #Hubli #Mysuru #Tiruchirappalli #Bareilly

EN 10083-3 alloy bars and plates

EN 10083-3 30CrNiMo8 Alloy Steel Bars

EN 10083-3 30CrNiMo8 is a high-performance chromium-nickel-molybdenum alloy steel grade designed for applications requiring very high strength, excellent toughness, and outstanding hardenability after heat treatment. With a nominal carbon content of around 0.30% and the balanced addition of chromium, nickel, and molybdenum, 30CrNiMo8 steel offers exceptional fatigue strength and impact resistance, even in large cross-section components. Supplied in plate and bar form, EN 10083-3 30CrNiMo8 alloy steel is widely used in heavy engineering, automotive, defense, and power transmission applications. This grade is manufactured in accordance with EN 10083-3, which specifies technical delivery conditions for alloy steels for quenching and tempering. Ladhani Metal Corporation is a reliable manufacturer, supplier, and exporter of EN 10083-3 30CrNiMo8 alloy steel plates and bars. Our materials are sourced from approved mills and supplied with controlled chemical composition, consistent mechanical properties, and precise dimensional accuracy as per EN 10083-3 requirements. Forms of Supply (as per grade): Hot rolled plates, normalized plates, quenched and tempered plates, cut-to-size plates, hot rolled round bars, black round bars, forged bars, peeled bars, bright round bars, square bars, flat bars Explanation of Designation (30CrNiMo8): • 30 – Approx. 0.30% carbon content • Cr – Chromium for strength, wear resistance, and hardenability • Ni – Nickel for toughness and impact strength • Mo – Molybdenum for improved hardenability, fatigue strength, and resistance to softening • 8 – Indicates alloying content range as per EN standard Chemical Composition (% – typical limits): • Carbon (C): 0.26 – 0.34 • Manganese (Mn): 0.40 – 0.70 • Silicon (Si): ≤ 0.40 • Chromium (Cr): 1.80 – 2.20 • Nickel (Ni): 1.80 – 2.20 • Molybdenum (Mo): 0.30 – 0.50 • Phosphorus (P): ≤ 0.025 • Sulphur (S): ≤ 0.035 Mechanical Properties (Typical, quenched & tempered): • Tensile Strength: 900 – 1100 MPa • Yield Strength: ≥ 700 MPa • Elongation: ≥ 12% • Hardness: 260 – 320 HB (after heat treatment) Key Features: • Cr-Ni-Mo alloy steel with very high strength and toughness • Excellent hardenability for thick plates and large bar sections • Superior fatigue and impact resistance • Very good response to quenching and tempering • Suitable for highly stressed and safety-critical components Material Characteristics: EN 10083-3 30CrNiMo8 alloy steel in plate and bar form provides an exceptional combination of strength, toughness, and hardenability due to its high chromium, nickel, and molybdenum content. It achieves uniform mechanical properties across large sections, making it ideal for critical structural and dynamically loaded components. Applications: • Heavy-duty shafts, axles, and spindles • Gears, pinions, and drive components • High-strength plates for structural and fabricated parts • Automotive, defense, and aerospace components • Heavy engineering and power transmission equipment Conclusion: Ladhani Metal Corporation supplies high-quality EN 10083-3 30CrNiMo8 alloy steel plates and bars in various heat-treated and cut-to-size conditions with consistent quality and reliable performance. With very high strength, excellent toughness, and superior hardenability, 30CrNiMo8 steel is a dependable choice for the most demanding engineering and industrial applications. For size availability, technical specifications, or customized requirements, contact Ladhani Metal Corporation. #EN10083 #EN100833 #EN100833Steel #EN10083AlloySteel #EN10083EngineeringSteel #ENStandardSteel #AlloySteel #ChromiumSteel #34Cr4 #42Cr4 #50Cr4 #EngineeringSteelBars #AlloySteelBars #AlloySteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #ShaftSteel #GearSteel #AxleSteel #CrankshaftSteel #BoltSteel #MachinePartsSteel #HeatTreatableSteel #NormalizedSteel #AnnealedSteel #QuenchedTemperedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #AlloySteelSupplier #EN100833Supplier #EN100833Manufacturer #EN100833Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #InfrastructureSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Kochi #Trivandrum #Goa #Aurangabad #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Bhavnagar

EN 10083-3 alloy bars and plates

EN 10083-3 34CrNiMo6 Alloy Steel Bar

EN 10083-3 34CrNiMo6 is a high-strength chromium-nickel-molybdenum alloy steel grade designed for components subjected to heavy dynamic loads and high stress conditions. With a nominal carbon content of approximately 0.34% and alloying additions of chromium, nickel, and molybdenum, this grade offers excellent hardenability, superior toughness, and outstanding fatigue resistance after quenching and tempering. EN 10083-3 34CrNiMo6 alloy steel bars are widely used in automotive, heavy engineering, oil & gas, and power transmission applications. The material is manufactured in accordance with EN 10083-3, which specifies technical delivery conditions for alloy steels for quenching and tempering. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of EN 10083-3 34CrNiMo6 alloy steel bars, supplied with certified chemical composition and controlled mechanical properties to meet international standards. Forms of Supply (as per grade): Hot rolled round bars, black round bars, forged bars, peeled bars, bright round bars, square bars, flat bars Explanation of Designation (34CrNiMo6): • 34 – Approx. 0.34% carbon content • Cr – Chromium for strength, wear resistance, and hardenability • Ni – Nickel for improved toughness and impact strength • Mo – Molybdenum for enhanced hardenability, fatigue strength, and resistance to tempering softening • 6 – Indicates alloying content range as per EN standard Chemical Composition (% – typical limits): • Carbon (C): 0.30 – 0.38 • Manganese (Mn): 0.50 – 0.80 • Silicon (Si): ≤ 0.40 • Chromium (Cr): 1.30 – 1.70 • Nickel (Ni): 1.30 – 1.70 • Molybdenum (Mo): 0.15 – 0.30 • Phosphorus (P): ≤ 0.025 • Sulphur (S): ≤ 0.035 Mechanical Properties (Typical, quenched & tempered condition): • Tensile Strength: 900 – 1100 MPa (can reach higher depending on section size and heat treatment) • Yield Strength: ≥ 750 MPa • Elongation: ≥ 12% • Impact Strength: Excellent toughness even at low temperatures • Hardness: 280 – 320 HB (after heat treatment) Key Features: • High-strength Cr-Ni-Mo alloy steel • Excellent hardenability for large diameter bars • Superior fatigue and impact resistance • Very good machinability in normalized or annealed condition • Reliable performance in heavy-duty and safety-critical components Material Characteristics: EN 10083-3 34CrNiMo6 alloy steel bar combines high strength with excellent toughness and fatigue resistance. Due to its strong hardenability, it maintains uniform mechanical properties across large cross sections. The presence of molybdenum improves resistance to temper brittleness and enhances high-temperature strength. Applications: • Crankshafts and camshafts • Heavy-duty shafts and axles • Gears, pinions, and couplings • Oil & gas components • Bolts, studs, and high-strength fasteners • Forged and machined mechanical parts Conclusion: Ladhani Metal Corporation supplies premium quality EN 10083-3 34CrNiMo6 alloy steel bars in various sizes and finishes to meet demanding engineering requirements. With its excellent strength, toughness, and fatigue resistance, 34CrNiMo6 is an ideal choice for critical mechanical and structural applications. For size availability, technical data, or customized supply requirements, contact Ladhani Metal Corporation. #EN10083 #EN100833 #EN100833Steel #EN10083AlloySteel #EN10083EngineeringSteel #ENStandardSteel #AlloySteel #ChromiumSteel #34Cr4 #42Cr4 #50Cr4 #EngineeringSteelBars #AlloySteelBars #AlloySteelRods #RoundBar #FlatBar #SquareBar #HexBar #ForgingSteel #MachinerySteel #AutomotiveSteel #MechanicalSteel #ShaftSteel #GearSteel #AxleSteel #CrankshaftSteel #BoltSteel #MachinePartsSteel #HeatTreatableSteel #NormalizedSteel #AnnealedSteel #QuenchedTemperedSteel #SteelManufacturers #SteelSuppliers #SteelStockist #SteelExporter #IndianSteel #AlloySteelSupplier #EN100833Supplier #EN100833Manufacturer #EN100833Exporter #SteelBarsIndia #SteelRodsIndia #MetalIndustry #IndustrialSteel #InfrastructureSteel #EngineeringIndustry #HeavyEngineeringSteel #FabricationSteel #SteelTrading #SteelWholesale #LadhaniMetal #Mumbai #Delhi #Chennai #Kolkata #Pune #Ahmedabad #Hyderabad #Bengaluru #Coimbatore #Surat #Vadodara #Rajkot #Nashik #Indore #Nagpur #Ludhiana #Faridabad #Noida #Visakhapatnam #Bhubaneswar #Jamshedpur #Patna #Ranchi #Jaipur #Lucknow #Kanpur #Bhopal #Chandigarh #Amritsar #Kochi #Trivandrum #Goa #Aurangabad #Salem #Hosur #Durgapur #Guwahati #Vapi #Ankleshwar #Morbi #Thane #Belgaum #Vijayawada #Madurai #Erode #Kolhapur #Hubli #Udaipur #Raipur #Bilaspur #Agra #Varanasi #Meerut #Jodhpur #Bhavnagar

EN 10084 20MoCr3 Round Bars

EN 10084 C10E Round Bars

EN 10083-3 30CrNiMo8 Alloy Steel Bars

EN 10083-3 34CrNiMo6 Alloy Steel Bar

steelrodsindia

Subcategory Tags

Contact Us