'varied requirements'

Ladhani Metal Corporation manufactures, supplies, and exports a comprehensive range of Erosion Protection Shields designed to safeguard boiler tubes, superheater tubes, and reheater tubes in power plants, industrial boilers, and heat recovery systems. These shields, also known as half round tube shields or boiler tube erosion shields, act as a protective cover over tubes exposed to high-velocity flue gases, abrasive fly ash, and soot blower impact. By reducing direct contact with erosive and corrosive media, they significantly extend the service life of tubes and minimize unplanned shutdowns. Function of Erosion Protection Shields • Provide a wear-resistant barrier for boiler tubes in erosive zones • Reduce damage caused by abrasive ash particles and high-velocity flue gases • Protect against soot blower jet erosion and localized overheating • Extend operational life of tubes, lowering maintenance and replacement costs Available Grades • SS 304 / SS 304L • SS 310 / SS 310S • SS 316 / SS 316L • SS 410 / SS 420 / SS 430 • 1Cr13 • 1Cr18Ni9Ti • Cr25Ni20 • 1Cr25Ni20Si2 • Cr23Ni13 • 1Cr20Ni14Si2 Ladhani Metal Corporation manufactures Erosion Protection Shields in multiple lengths, diameters, and thicknesses, customized to fit various tube sizes and curvature requirements. All shields are precision-engineered for easy installation and secure fitment, ensuring reliable performance even under extreme boiler conditions. Applications • Power generation boilers – protection of superheater, reheater, and economizer tubes • Waste Heat Recovery Boilers (WHRBs) – safeguard against flue gas erosion • Heat Recovery Steam Generators (HRSGs) – protect tubes under continuous high-velocity gas exposure • Petrochemical process heaters and industrial steam systems – long-lasting erosion and oxidation resistance Features • Wide material grade availability to suit varied service conditions • High resistance to oxidation, scaling, and erosion at elevated temperatures • Low maintenance solution that improves tube reliability and lifespan • Export-ready specifications with assured quality and durability Conclusion Erosion Protection Shields from Ladhani Metal Corporation are engineered to deliver long-term protection for boiler tubes operating in highly erosive and corrosive environments. With a wide range of stainless steel and alloy grades available, these shields provide tailored solutions for diverse industrial applications, ensuring maximum efficiency and reduced operational downtime. #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Muzaffarpur#halftubeshield #utypehalftubeshield #tubeshieldexporter #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier #SSShielding #IndustrialTubeShield #BoilerTubeGuard #CustomMetalParts #SteelIndustryIndia #MetalEngineering #HeavyIndustrySupply #StainlessSteelIndia #SteelExporters #MetalComponentExport #FabricatedProducts #SteelDealer #IndustrialSupplyIndia #BoilerTubeFittings #TubeShieldingSolutions #HalfTubeCover #HeatExchangerShield #HalfRoundReheaterShield #ReheaterTubeShield #BoilerReheaterProtection #PowerPlantTubeShield #BoilerErosionShield #SteamBoilerTubeShield #HighTempTubeShield #BoilerWearProtection

Ladhani Metal Corporation offers SS 304 Boiler Tube Shields engineered to protect straight boiler and heat exchanger tubes from erosion, oxidation, and impact damage in aggressive thermal environments. Manufactured from austenitic stainless steel grade SS 304, these shields provide excellent corrosion resistance, good mechanical strength, and thermal stability at high operating temperatures. SS 304 is widely used in applications where exposure to flue gases, steam, and particulate matter demands reliable, long-term protection. The half-round design is precision-formed to match the curvature of straight boiler tubes, ensuring a snug and secure fit. This close contact minimizes tube exposure to abrasive particles, high-velocity gases, and soot blower impact. The shields serve as a durable physical barrier, extending tube life and reducing the frequency of costly maintenance and replacements. Ladhani Metal Corporation manufactures, supplies, and exports SS 304 Boiler Tube Shields in a variety of lengths, diameters, and thicknesses to suit specific application requirements across domestic and international markets. SS 304 Grade Chemical Composition – Austenitic Stainless Steel • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 18.0 – 20.0% • Nickel (Ni): 8.0 – 10.5% • Iron (Fe): Balance Applications: Suitable for thermal power stations, process heaters, WHRBs, HRSGs, and chemical industries operating under corrosive and high-heat environments. Uses • Protection of straight boiler tubes from erosion and oxidation • Installed in radiant and convection zones of boilers • Shields against soot blower damage in utility boilers • Used in HRSG and WHRB systems exposed to flue gases • Ideal for chemical, food, and textile processing boilers Features • Excellent corrosion resistance – Performs in oxidizing and mildly acidic environments • High thermal durability – Maintains strength at elevated temperatures • Long service life – Minimizes wear and reduces maintenance intervals • Easy to install – Can be clamped, tack welded, or banded • Custom-built – Available in varied lengths, thicknesses, and diameters • Export-ready – Manufactured to meet international standards Applications • Power plants – Steam generator tube protection from scale and erosion • Refineries and petrochemical units – For tube shielding in process heaters • Waste heat recovery systems – In cement, steel, and glass industries • Industrial boilers – Where high temperature and flue gas exposure are present Conclusion The SS 304 Boiler Tube Shield from Ladhani Metal Corporation delivers robust and corrosion-resistant protection for straight tubes exposed to harsh thermal and gaseous environments. With high-grade austenitic stainless steel construction, precise fit, and customizable dimensions, these shields are ideal for domestic and global boiler systems. For technical consultation, material selection, or custom orders, contact Ladhani Metal Corporation. #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Salem #Erode #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Hassan #Cuttack #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Gaya #Muzaffarpur #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier #SSShielding #IndustrialTubeShield #BoilerTubeGuard #CustomMetalParts #SteelIndustryIndia #MetalEngineering #HeavyIndustrySupply #StainlessSteelIndia #SteelExporters #MetalComponentExport #FabricatedProducts #SteelDealer #IndustrialSupplyIndia #BoilerTubeFittings #TubeShieldingSolutions #HalfTubeCover #HeatExchangerShield #halftubeshield #utypehalftubeshield #tubeshieldexporter

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are engineered to provide robust protection for boiler, superheater, and heat exchanger tubes against high-temperature erosion, slag deposition, scaling, and corrosive gas exposure. These shields are essential in power plants, petrochemical systems, and high-heat industrial environments where tubes are vulnerable to rapid degradation due to thermal cycling and particulate flow. The half-round design ensures quick installation over curved or straight tube sections without system disassembly. U Type Inner Half Round Tube Shield The U Type Inner Half Round Tube Shield is specially designed to protect the inner curvature of U-bend tubes, which often experiences high levels of turbulence, localized corrosion, and scaling due to gas redirection and mechanical stress. Inner shields are commonly paired with outer shields for full bend protection and are manufactured in a wide range of stainless steel and high-temperature alloy grades, customized to specific environmental and system requirements. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of U Type Inner Half Round Tube Shields in various material grades, offering tailored protection solutions for high-temperature and corrosive conditions across multiple industries. Available Grades • SS 304 – General-use stainless steel with good corrosion and heat resistance • SS 304L – Low-carbon version for improved weldability and reduced carbide precipitation • SS 316 – Molybdenum-added alloy with excellent resistance to pitting and chlorides • SS 316L – Low-carbon alternative for superior corrosion resistance in welded environments • SS 310 – Austenitic high-temperature steel with excellent oxidation resistance • SS 310S – Low-carbon SS 310 for better thermal fatigue performance • SS 410 – Martensitic stainless steel with good strength and abrasion resistance • SS 420 – High-hardness martensitic grade ideal for erosion-prone zones • SS 430 – Ferritic grade for moderate corrosion and oxidation resistance • 1Cr13 – Martensitic stainless steel offering mechanical protection and heat resistance • 1Cr18Ni9Ti – Titanium-stabilized grade offering resistance to intergranular corrosion • Cr23Ni13 – High-temperature alloy with excellent oxidation and scaling resistance • Cr25Ni20 – High-performance grade for extreme thermal and oxidizing conditions • 1Cr25Ni20Si2 – Heat-resistant alloy with silicon for improved scale resistance • 1Cr20Ni14Si2 – Alloy for thermal fatigue protection and oxidizing environments Applications • Inner arc protection in U-bend tubes of boilers, superheaters, and reheaters • Shielding internal curves of tubes in waste heat recovery boilers (WHRBs) and HRSGs • Corrosion and scale defense for inner tube arcs in petrochemical and steam reforming units • Inner surface protection in furnace coils, reformers, and incinerators • Installed in chemical plants and thermal systems prone to turbulent flue gas exposure Features • Focused inner arc protection – Guards the most corrosion- and scale-prone surface of U-bend tubes • Material flexibility – Available in multiple grades for varied thermal, mechanical, and chemical requirements • Excellent thermal resistance – Withstands extreme temperatures depending on material (up to 1150°C+) • Precise fit – Custom-fabricated to match exact tube dimensions and bend radii • Simple installation – Mounted using clamps, stainless bands, or welding techniques • Dual-shield pairing – Can be combined with outer shields for complete U-bend coverage • Long-lasting performance – Enhances tube reliability and reduces maintenance in high-wear zones Applications • power generation – Protects U-bend inner surfaces in superheaters and economizers from flue gas turbulence • petrochemical plants – Shields inside arcs in reformers and heaters exposed to chlorides and acidic gases • waste heat systems – Installed in HRSGs and WHRBs to prevent slag and oxidation on internal bends • chemical industries – Suitable for reactors and high-temperature exchangers handling corrosive media • cement and metallurgy – Used in systems exposed to flame, dust, and oxidizing atmospheres Conclusion The U Type Inner Half Round Tube Shield by Ladhani Metal Corporation – manufacturer, supplier, and exporter – is a precision-engineered solution for protecting the inner arc of U-bend tubes against corrosion, scale formation, and thermal damage. Available in a wide range of stainless steels and high-temperature alloys, these shields provide durable, customizable, and easy-to-install protection for critical components in power, chemical, and thermal processing systems. For custom sizes, technical assistance, or quotations, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are precision-fabricated components used to protect the external surfaces of tubes in boilers, heat exchangers, and high-temperature industrial equipment. These shields are critical for reducing erosion, oxidation, and thermal degradation, particularly in high-temperature zones where process gases, flames, or particulate matter can damage tube integrity over time. 1Cr20Ni14Si2 Half Round Tube Shield The 1Cr20Ni14Si2 Half Round Tube Shield is a semi-cylindrical protective sleeve manufactured from a high-performance austenitic stainless steel alloy consisting of approximately 20% chromium, 14% nickel, and 2% silicon. This alloy is designed for excellent oxidation resistance, carburization resistance, and high-temperature structural stability. The inclusion of silicon significantly enhances the formation of a protective oxide film, making it suitable for use in severe thermal environments such as industrial furnaces, superheaters, and reformers. The shield’s half-round profile is engineered for easy installation over the tube surface, ensuring a tight, durable fit and long-term protection. Chemical Composition of 1Cr20Ni14Si2 – Austenitic Heat-Resistant Stainless Steel • Carbon (C): ≤ 0.15% • Silicon (Si): 1.50 – 2.50% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.030% • Chromium (Cr): 19.0 – 21.0% • Nickel (Ni): 13.0 – 15.0% • Iron (Fe): Balance Uses • Boiler Tube Protection – Shields critical areas of superheater and reheater tubes from oxidation and scale formation under high flue gas temperatures. • Furnace Tube Shielding – Guards against flame impingement, high-temperature corrosion, and mechanical erosion in radiant and convection zones. • Heat Exchanger Cladding – Offers external protection for tubes subjected to thermal shock and corrosive process gases. • Steam Reforming Equipment – Prevents surface degradation of tubes in syngas and hydrogen production systems operating under carburizing conditions. • Waste Heat Boilers and Incinerators – Provides a thermal barrier for tubes exposed to particulate-laden gas flows and fluctuating temperatures. Features • Excellent Oxidation Resistance – High chromium and silicon content form a dense, protective oxide layer for long service in oxidizing environments. • Carburization and Thermal Fatigue Resistance – Suitable for prolonged use in atmospheres containing hydrocarbons, CO, and high radiant heat. • High-Temperature Durability – Retains strength and resists creep deformation at service temperatures up to 1000°C. • Austenitic Microstructure – Offers superior ductility, resistance to cracking under thermal cycling, and excellent metallurgical stability. • Easy Installation – Half-round configuration allows for fast on-site fitment using mechanical clamping or welding, with minimal tube disruption. • Surface Finishing Options – Available in pickled, passivated, or bright annealed finishes for improved corrosion and heat resistance. • Custom Built – Manufactured to meet specific size, thickness, and design requirements for varied industrial applications. Applications • Thermal Power Plants – Used to protect boiler tubes in high-temperature zones like superheaters, economizers, and air preheaters. • Petrochemical and Refining Plants – Deployed in furnace tubes, reformer systems, and transfer line exchangers where oxidation and carburization are concerns. • Waste-to-Energy Systems – Protects boiler and heat recovery tubes from corrosive gas attack and ash erosion in incinerators. • Metallurgical Furnaces – Applied in annealing, forging, and reheating furnaces for protecting tube walls exposed to high heat and corrosive gases. • Cement and Lime Kilns – Shields heat recovery piping and cooler tubes from abrasion and elevated thermal conditions. • Chemical Process Equipment – Guards steam and process tubes in reactors, condensers, and exchangers from scaling and thermal damage. Conclusion The 1Cr20Ni14Si2 Half Round Tube Shield by Ladhani Metal Corporation is engineered to perform reliably in high-temperature, high-corrosion industrial environments. With excellent resistance to oxidation, carburization, and thermal fatigue, this alloy-based shield offers superior performance and longevity for boiler and furnace applications. Its austenitic structure ensures mechanical stability and ductility under extreme conditions, while its precise half-round design enables convenient installation and durable coverage. Custom-built to your project’s specifications, Ladhani Metal Corporation’s tube shields represent a smart investment in system protection, reliability, and long-term efficiency. For technical details, customization options, or a quotation, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are purpose-built components designed to extend the life of boiler, heat exchanger, and process tubes by offering robust protection from erosion, scaling, and thermal impact. These shields are essential for maintaining system performance and reducing unscheduled downtime in industries that operate under demanding thermal and mechanical conditions. SS 420 Half Round Tube Shield The SS 420 Half Round Tube Shield is a semi-cylindrical protector fabricated from martensitic stainless steel grade 420. Known for its high hardness, wear resistance, and moderate corrosion resistance, SS 420 is ideally suited for applications where abrasion and mechanical stress are predominant concerns. The half-round configuration ensures a secure fit over existing tubes, creating a physical barrier against direct exposure to high-velocity gases, fly ash, and thermal shocks. Its ability to retain strength at elevated temperatures makes it suitable for use in utility boilers, air preheaters, and other high-wear process systems. Chemical Composition of SS 420 – Martensitic Stainless Steel • Carbon (C): 0.15 – 0.40% • Manganese (Mn): ≤ 1.00% • Phosphorus (P): ≤ 0.040% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 12.0 – 14.0% • Nickel (Ni): ≤ 0.75% • Iron (Fe): Balance Uses • Boiler Tube Protection – Provides abrasion resistance in flue gas paths, soot blower zones, and areas exposed to particulate erosion in industrial boilers. • Heat Exchanger Shielding – Minimizes mechanical damage caused by turbulent flow and particulate-laden fluids, preserving heat transfer efficiency. • Furnace Tube Guarding – Protects furnace and kiln tubes from thermal scale buildup and flame impingement in harsh operating zones. • Steam and Condensate Systems – Shields tubes from vibration, pressure cycling, and moderate steam-induced corrosion. • Ash and Gas Flow Zones – Ideal for protecting tubes in areas of fly ash impact or high-speed combustion gas flow in WTE and biomass plants. Features • High Surface Hardness – Excellent resistance to surface wear, impact, and mechanical abrasion due to its high carbon and martensitic structure. • Moderate Corrosion Resistance – Withstands oxidizing and mildly corrosive conditions up to 650°C, suitable for moderate industrial atmospheres. • Structural Integrity – Maintains strength under pressure and temperature cycling, offering long service life in mechanical protection roles. • Easy Installation – The half-round design enables fast application in the field with minimal disruption to tube layout or operation. • Finishing Options – Available in bright annealed, pickled, or passivated surfaces depending on operational requirements. • Custom Built – Offered in varied lengths, diameters, thicknesses, and attachment styles (clamp-on or weld-on) to match specific installations. Applications • Thermal and Biomass Power Stations – Used to protect boiler tubes from ash erosion and gas turbulence in high-velocity flue paths. • Cement and Steel Industries – Shields kiln and heat recovery tubes from particulate impact, slag, and high-temperature dust environments. • Waste-to-Energy Plants – Guards tubes in combustion chambers and economizers where gas stream erosion and soot buildup are persistent issues. • Oil Refineries – Applied in heat exchangers and preheater tubes exposed to abrasive flow or moderate corrosion risk. • Pulp and Paper Mills – Used in black liquor recovery boilers and steam generators handling fibrous or corrosive waste products. • Air Preheaters – Ideal for tubes located in dust-laden environments requiring protection against wear and gas abrasion. Conclusion The SS 420 Half Round Tube Shield from Ladhani Metal Corporation offers a high-performance, wear-resistant solution for tube protection in mechanically aggressive and thermally intensive environments. Its martensitic structure provides outstanding surface hardness, making it especially effective in soot blower zones, high-velocity ducts, and areas subject to abrasive particle flow. While not intended for severe chemical environments, SS 420 delivers exceptional value where mechanical durability is the top priority. With full customization options and precision manufacturing, Ladhani Metal Corporation ensures durable, reliable shielding products tailored to your plant’s exact operational needs. For technical consultations, order customization, or to request a quotation, please contact Ladhani Metal Corporation.

Ladhani Metal Corporation is a reliable manufacturer and supplier of DIN 2561 carbon steel flanges, built to deliver strength, durability, and cost-effectiveness in low-pressure piping systems. Produced in compliance with the DIN 2561 standard, these flanges are offered in pressure ratings such as PN6, PN10, PN16, PN25, and PN40, tailored to meet varied industrial requirements. Carbon steel flanges are widely used in applications where high mechanical strength is needed and corrosion resistance is less critical. They are commonly found in oil and gas, petrochemical, power plants, and general engineering industries. Flange Types: Weld neck flanges: Ideal for high-pressure, high-temperature environments requiring a strong connection. Raised face (RF): Designed for better gasket sealing to prevent leakage under pressure. Flat face (FF): Suitable for systems using brittle or non-metallic gasket materials. Common Grades, Chemical Composition, and Applications: ASTM A105 (Forged Carbon Steel) Chemical Composition: Carbon (C): 0.35% max Manganese (Mn): 0.60–1.05% Phosphorus (P): 0.035% max Sulfur (S): 0.040% max Silicon (Si): 0.10–0.35% Applications: Widely used in pressure systems at ambient and high temperatures, such as valves, fittings, and flanges in oil & gas pipelines and refineries. ASTM A350 LF2 (Low-Temperature Carbon Steel) Chemical Composition: Carbon (C): ≤ 0.30% Manganese (Mn): 0.60–1.35% Phosphorus (P): ≤ 0.035% Sulfur (S): ≤ 0.040% Silicon (Si): 0.15–0.30% Applications: Used in low-temperature service applications such as cryogenic piping, pressure vessels, and heat exchangers. Key Features: Manufactured according to DIN 2561 specifications. High mechanical strength and load-bearing capacity. Cost-effective solution for general-purpose industrial piping. Available in various face types, sizes, and drilling patterns. Applications: Oil & Gas Pipelines: Ideal for upstream, midstream, and downstream operations where high strength is essential. Petrochemical Industry: Used in process lines, utility systems, and structural pipework exposed to high temperatures and pressure. Power Plants: Suitable for use in high-temperature steam and water pipelines in thermal and nuclear power plants. Water Treatment & Distribution: Commonly used in municipal water supply and wastewater systems due to their strength and cost-efficiency. Construction & Engineering: Employed in structural supports, machinery, and piping frameworks where mechanical integrity is crucial. Conclusion: DIN 2561 carbon steel flanges from Ladhani Metal Corporation offer a strong, economical solution for a wide range of industrial piping systems. With availability in trusted grades like ASTM A105 and A350 LF2, these flanges meet international standards for strength and reliability. Backed by precise manufacturing and rigorous quality checks, our carbon steel flanges ensure dependable performance across industries. For technical details, pricing, or bulk inquiries, contact Ladhani Metal Corporation.

Our organization has successfully expanded its business in market owing to the offered elevated quality array of SS904L Union. The offered union is manufactured by utilizing high-grade raw material and advanced technology by our skilled engineers. Apart from this, our union is tested on various parameters in order to ensure its sturdiness and quality. Clients can avail this union from us in different specifications and at affordable prices. Features: Facilitate reliable electrical connection Heat resistance Durable construction Seamless polish Electrically safe to use Specific design Specifications: Size: 1/2"NB TO 4"NB IN Class: 3000 LBS, 6000 LBS, 9000 LBS Type: Socket Weld (S/W) & SCREWED (SCRD) – NPT, BSP, BSPT Materials: Stainless Steel Dairy Union: SS Dairy Union ASTM A182 F304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L,

Our organization has successfully expanded its business in market owing to the offered elevated quality array of SS904L Union. The offered union is manufactured by utilizing high-grade raw material and advanced technology by our skilled engineers. Apart from this, our union is tested on various parameters in order to ensure its sturdiness and quality. Clients can avail this union from us in different specifications and at affordable prices. Features: Facilitate reliable electrical connection Heat resistance Durable construction Seamless polish Electrically safe to use Specific design Specifications: Size: 1/2"NB TO 4"NB IN Class: 3000 LBS, 6000 LBS, 9000 LBS Type: Socket Weld (S/W) & SCREWED (SCRD) – NPT, BSP, BSPT Materials: Stainless Steel Dairy Union: SS Dairy Union ASTM A182 F304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L,

Our organization has successfully expanded its business in market owing to the offered elevated quality array of SS904L Union. The offered union is manufactured by utilizing high-grade raw material and advanced technology by our skilled engineers. Apart from this, our union is tested on various parameters in order to ensure its sturdiness and quality. Clients can avail this union from us in different specifications and at affordable prices. Features: Facilitate reliable electrical connection Heat resistance Durable construction Seamless polish Electrically safe to use Specific design Specifications: Size: 1/2"NB TO 4"NB IN Class: 3000 LBS, 6000 LBS, 9000 LBS Type: Socket Weld (S/W) & SCREWED (SCRD) – NPT, BSP, BSPT Materials: Stainless Steel Dairy Union: SS Dairy Union ASTM A182 F304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L,