The Outer Half Round 90 Degree Bend Tube Shield is fabricated to precisely match the outer arc of 90° tube bends. Its semi-cylindrical form conforms tightly to the external curve, forming a protective barrier that resists abrasive flow and corrosive attack. These shields are typically used in superheaters, reheaters, waste heat recovery boilers (WHRBs), and HRSGs where return bends are most vulnerable. The shields are manufactured from corrosion-resistant stainless steels and heat-resistant alloys, selected based on temperature ratings and media conditions. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of Outer Half Round 90 Degree Bend Tube Shields, offering standard and custom-engineered designs for a wide variety of boiler and heat recovery applications. Available Material Grades • Stainless Steels: SS 304, 304L, 310, 310S, 316, 316L, 410, 420, 430 • Heat-Resistant Alloys: 1Cr13, 1Cr18Ni9Ti, Cr25Ni20, 1Cr25Ni20Si2, Cr23Ni13, 1Cr20Ni14Si2, Inconel 600, and more Typical Chemical Composition (example – SS 316) • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 16.0 – 18.0% • Nickel (Ni): 10.0 – 14.0% • Molybdenum (Mo): 2.0 – 3.0% • Iron (Fe): Balance Applications: Used in curved tube regions where the external surface is subjected to thermal wear, ash abrasion, and corrosive gases. Uses • Protection of 90-degree U-bends in boiler and superheater tube banks • Return bend shielding in heat exchangers and WHRBs • Safeguarding curved tubes in process heaters, HRSGs, and refinery systems • Applied in thermal, petrochemical, and chemical plant steam systems • Suitable for power generation and heavy industrial boilers Features • Form-fitting design – Precisely matches outer curvature of U-bends for tight, secure installation • Heat and corrosion resistance – Manufactured from materials designed to withstand extreme thermal and chemical environments • Durable protection – Shields critical bend zones from fly ash erosion, soot-blowing wear, and gas impingement • Reduced maintenance – Prolongs tube life and minimizes unplanned outages due to bend failure • Custom-engineered – Fabricated based on user drawings, coil geometry, and tube specifications • Flexible installation – Can be clamped, welded, or banded with minimal disassembly Applications • steam power boilers – Protects outer bend regions from accelerated erosion and high-velocity flue gases • oil and gas refineries – Used in convection section return bends to enhance tube longevity • WHRB and HRSG installations – Shields bend areas exposed to intense ash loading • fertilizer and chemical processing – Ideal for curved coils in high-temperature, corrosive environments • industrial heaters – Ensures safety and long-term performance of curved tube bundles Conclusion The Outer Half Round 90 Degree Bend Tube Shield by Ladhani Metal Corporation – manufacturer, supplier, and exporter – delivers critical protection to return bends in thermal process systems. Designed for curved tube geometry, these shields reduce erosion risk, extend tube service life, and support the reliability of high-performance boilers, reformers, and heat recovery units. For custom sizing, material selection, or technical specifications, contact Ladhani Metal Corporation. #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Salem #Erode #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Hassan #Cuttack #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Gaya #Muzaffarpur #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier #SSShielding #IndustrialTubeShield #BoilerTubeGuard #CustomMetalParts #SteelIndustryIndia #MetalEngineering #HeavyIndustrySupply #StainlessSteelIndia #SteelExporters #MetalComponent

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are specially engineered to protect boiler, superheater, and heat exchanger tubes from surface wear, high-temperature scaling, flue gas erosion, and slag buildup. These shields are widely used in thermal power plants, waste heat recovery systems, and high-temperature industrial processes. Designed in a half-round profile, they ensure secure and easy installation over curved or straight tubes, extending tube service life and reducing maintenance interruptions. Cr23Ni13 U Type Outer Half Round Tube Shield The Cr23Ni13 U Type Outer Half Round Tube Shield is manufactured from a high-alloy austenitic stainless steel containing approximately 23% chromium and 13% nickel. This alloy provides superior resistance to oxidation, high-temperature corrosion, and thermal fatigue. The outer U-type shield is designed to protect the external curvature of U-bend tubes, which are often exposed to the harshest operating conditions—such as direct flame impingement, slag attack, and aggressive flue gas streams. • Outer U Type Half Round Tube Shield – Offers targeted protection for the outer arc of U-bend tubes, shielding against intense heat, slag erosion, and high-velocity gas flow. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of Cr23Ni13 U Type Outer Half Round Tube Shields, offering durable, high-performance solutions for critical thermal and chemical environments. Chemical Composition of Cr23Ni13 – High-Alloy Austenitic Stainless Steel • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 1.50% • Phosphorus (P): ≤ 0.040% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.50% • Chromium (Cr): 22.0 – 24.0% • Nickel (Ni): 12.0 – 14.0% • Iron (Fe): Balance Applications: Ideal for high-temperature, oxidizing, and corrosive environments requiring strong thermal stability, scale resistance, and long-term tube protection. Uses • Shielding U-bend outer arcs in superheaters and reheaters exposed to direct flame and thermal cycling • Protection of return bends in waste heat recovery boilers (WHRBs) and heat recovery steam generators (HRSGs) • Coverage for high-temperature bends in petrochemical process heaters and cracking units • Applied in radiant coils and furnace tubes operating under oxidizing and high-velocity gas environments • Suitable for metallurgical, cement, and gas processing industries with extreme thermal conditions Features • Excellent oxidation and corrosion resistance – High chromium and nickel content ensures scale resistance in aggressive atmospheres • High thermal stability – Performs reliably at temperatures exceeding 1100°C, with resistance to thermal fatigue and distortion • Outer bend protection – Specifically guards the most vulnerable surface of the U-bend against slag and flame exposure • Custom fitment – Manufactured to match precise tube diameters and bend radii for tight, stable installation • Easy to install – Mountable with clamps, tack welds, or stainless bands without system disassembly • Long service life – Reduces frequency of tube replacement, enhancing system reliability and uptime Applications • thermal power plants – Used on outer arcs of U-bend tubes in boilers and superheaters to protect against slag and oxidation • petrochemical plants – Shields return bends in high-temperature heaters exposed to process gas erosion and carburization • waste heat recovery – Protects bends in WHRBs and HRSGs subjected to hot gas streams and temperature fluctuations • industrial furnaces – Installed in radiant sections and high-temperature piping in incinerators and process furnaces • cement and metallurgy industries – Applied to bends exposed to flame, dust, and thermal cycling under extreme heat Conclusion The Cr23Ni13 U Type Outer Half Round Tube Shield by Ladhani Metal Corporation—manufacturer, supplier, and exporter—is a robust, heat-resistant solution for protecting the outer curvature of U-bend tubes in aggressive thermal environments. With high oxidation resistance, thermal stability, and long-term structural durability, this shield is ideal for demanding applications in power, chemical, and industrial sectors where performance and reliability are critical. For technical consultation, custom orders, or quotations, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are precision-engineered components used to protect boiler and heat exchanger tubes from erosion, scaling, and high-temperature corrosion. These shields are widely applied in industrial systems exposed to thermal cycling, aggressive gases, and particulate flow. Their half-round shape allows for simple and secure installation over straight or curved tube surfaces, extending tube life and reducing maintenance needs. SS 410 U Type Outer Half Round Tube Shield The SS 410 U Type Outer Half Round Tube Shield is made from SS 410, a hardenable martensitic stainless steel known for its excellent strength, toughness, and moderate corrosion resistance. This outer U-type configuration is designed to protect the external arc of U-bend tubes in heat exchangers, boilers, and reheaters where abrasive flue gases and mechanical wear are common. SS 410’s hardness and resistance to thermal fatigue make it suitable for shielding outer tube surfaces exposed to harsh industrial environments. • Outer U Type Half Round Tube Shield – Protects the outer curvature of U-bend tubes from erosion, scaling, and mechanical impact caused by high-velocity gas and slag deposits. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of SS 410 U Type Outer Half Round Tube Shields, offering durable solutions for power generation and high-temperature applications. Chemical Composition of SS 410 – Martensitic Stainless Steel • Carbon (C): 0.08 – 0.15% • Manganese (Mn): ≤ 1.00% • Phosphorus (P): ≤ 0.040% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 11.5 – 13.5% • Nickel (Ni): ≤ 0.75% • Iron (Fe): Balance Applications: Suitable for high-temperature environments with abrasive gas flow and mechanical stress, where moderate corrosion resistance is sufficient. Uses • Outer arc protection for U-bend tubes in boilers, superheaters, and reheaters in thermal power plants • Shields tube bends in economizers and waste heat recovery systems from flue gas erosion • Applied in return bends in gas processing heaters and exhaust systems subjected to particulate flow • Ideal for high-strength, mechanically demanding environments where wear resistance is critical • Used in utility boilers, process furnaces, and other industrial systems operating under moderate corrosion and high heat conditions Features • High mechanical strength – Martensitic structure provides excellent hardness and wear resistance for abrasive service conditions • Moderate corrosion resistance – Chromium content offers basic protection against oxidation and steam exposure • Outer bend coverage – Shields the most exposed and impact-prone arc of the U-bend tube • Precision fit – Custom-fabricated to match tube diameters and bend radii, ensuring tight, vibration-free installation • Easy to install – Mountable using stainless steel bands, clamps, or tack welds without dismantling the system • Cost-effective – Offers durable tube protection with high strength at a lower material cost compared to austenitic grades Applications • power generation – Protects outer curves of U-bend tubes in high-temperature zones of boilers and reheaters • petrochemical processing – Shields tube bends in process heaters and reformers from thermal and gas erosion • waste heat recovery – Applied in WHRBs and HRSGs to guard against slag impact and scale formation • industrial furnaces – Suitable for high-wear zones where heat and particulate flow cause surface degradation • general industry – Used in utility boilers and gas exhaust systems where mechanical protection is needed with moderate corrosion resistance Conclusion The SS 410 U Type Outer Half Round Tube Shield by Ladhani Metal Corporation—manufacturer, supplier, and exporter—is a reliable and economical solution for protecting U-bend tube outer surfaces in boilers, heat exchangers, and thermal process systems. With excellent mechanical strength, good thermal stability, and moderate corrosion resistance, it is ideal for industrial applications that demand abrasion resistance and long service life in high-temperature environments. For technical consultation, custom orders, or quotations, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are precision-engineered components used to protect boiler and heat exchanger tubes from erosion, scaling, and high-temperature corrosion. These shields are widely applied in industrial systems exposed to thermal cycling, aggressive gases, and particulate flow. Their half-round shape allows for simple and secure installation over straight or curved tube surfaces, extending tube life and reducing maintenance needs. SS 316L U Type Outer Half Round Tube Shield The SS 316L U Type Outer Half Round Tube Shield is manufactured from SS 316L, a low-carbon molybdenum-bearing austenitic stainless steel known for its superior corrosion resistance and excellent weldability. This outer U-type configuration is designed to protect the external arc of U-bend tubes in boilers, superheaters, heat exchangers, and waste heat recovery systems. The low carbon content of SS 316L reduces the risk of sensitization and intergranular corrosion, making it ideal for welded systems exposed to chlorides, acidic gases, and steam. • Outer U Type Half Round Tube Shield – Offers full coverage to the outer curvature of U-bend tubes, shielding against erosion, slag buildup, high-temperature oxidation, and chemical attack. Ladhani Metal Corporation is a leading manufacturer, supplier, and exporter of SS 316L U Type Outer Half Round Tube Shields, delivering precision-built, long-lasting solutions for demanding industrial applications. Chemical Composition of SS 316L – Low-Carbon Austenitic Stainless Steel • Carbon (C): ≤ 0.03% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 16.0 – 18.0% • Nickel (Ni): 10.0 – 14.0% • Molybdenum (Mo): 2.0 – 3.0% • Iron (Fe): Balance Applications: Suited for high-temperature and corrosive environments requiring superior resistance to chlorides, acids, and weld-induced corrosion. Uses • Protection of U-bend outer arcs in superheaters and reheaters in thermal and nuclear power stations • Shielding tube bends in chemical heat exchangers and steam reformers exposed to chlorides and acidic gases • Outer bend coverage for WHRB and HRSG tubes subjected to flue gas flow, scaling, and erosion • Applied to return bends in condensers and evaporators in marine and coastal facilities • Ideal for pharmaceutical, food processing, and clean energy systems requiring low carbon stainless steel Features • Exceptional corrosion resistance – Molybdenum addition enhances resistance to pitting, crevice corrosion, and chlorides • Low carbon content – Minimizes the risk of sensitization and intergranular corrosion after welding or high-heat exposure • High-temperature capability – Maintains performance under cyclic heating and thermal stress conditions • Precision fitment – Custom-fabricated to match tube diameter and radius, ensuring tight, vibration-free installation • Easy installation – Mountable with clamps, banding, or tack welds without requiring shutdown or disassembly • Long-term durability – Withstands corrosive gases, scaling, and erosion, extending tube life and reducing downtime Applications • thermal power plants – Protects outer arcs of U-bend tubes from flue gas erosion and scaling in high-temperature zones • chemical and petrochemical plants – Shields return bends in reformers and exchangers operating with corrosive process media • waste heat recovery systems – Provides protection in WHRBs and HRSGs from thermal fatigue and particulate-laden flue gases • marine and offshore facilities – Suitable for chloride-rich environments such as desalination plants and coastal condensers • process and pharmaceutical industries – Ensures corrosion-resistant performance in systems with stringent cleanliness and durability requirements Conclusion The SS 316L U Type Outer Half Round Tube Shield by Ladhani Metal Corporation—manufacturer, supplier, and exporter—is a corrosion-resistant, precision-engineered solution for protecting U-bend tube outer surfaces in boilers and heat exchangers. Its low carbon content, molybdenum-enhanced alloy composition, and excellent weldability make it ideal for harsh industrial environments requiring high performance and reliability. Designed for easy installation and long service life, it is a trusted choice for power, petrochemical, marine, and process applications. For technical consultation, custom orders, or quotations, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are precision-engineered components used to protect boiler and heat exchanger tubes from erosion, scaling, and high-temperature corrosion. These shields are widely applied in industrial systems exposed to thermal cycling, aggressive gases, and particulate flow. Their half-round shape allows for simple and secure installation over straight or curved tube surfaces, extending tube life and reducing maintenance needs. SS 310S U Type Outer Half Round Tube Shield The SS 310S U Type Outer Half Round Tube Shield is designed using SS 310S, a low-carbon austenitic stainless steel known for its excellent resistance to oxidation, high-temperature strength, and enhanced weldability. This outer U-type shield is specifically engineered to cover and protect the outer arc of U-bend tube sections in superheaters, reheaters, waste heat recovery systems, and high-temperature heat exchangers. With its high chromium and nickel content, SS 310S provides superior performance in oxidizing and carburizing environments while maintaining structural stability during prolonged thermal cycling. • Outer U Type Half Round Tube Shield – Shields the external curvature of U-bend tubes from slag deposition, hot gas erosion, scale formation, and high-temperature fatigue. Ladhani Metal Corporation is a leading manufacturer, supplier, and exporter of SS 310S U Type Outer Half Round Tube Shields, offering high-performance solutions for critical thermal and process applications across industries. Chemical Composition of SS 310S – Low-Carbon Austenitic Stainless Steel • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.50% • Chromium (Cr): 24.0 – 26.0% • Nickel (Ni): 19.0 – 22.0% • Iron (Fe): Balance Applications: Best suited for high-temperature, oxidizing, and carburizing environments where thermal stability, scale resistance, and corrosion protection are essential. Uses • Outer surface protection of U-bend tubes in superheaters and reheaters of thermal and industrial power plants • Shielding of return bends in petrochemical reformers, process heaters, and high-temperature exchangers • Applied to outer arcs in WHRBs and HRSGs subjected to thermal cycling, slag erosion, and hot flue gas exposure • Suitable for use in chemical and gas processing units handling oxidizing or acidic exhausts at elevated temperatures • Ideal for incinerator tubes, radiant coils, and furnace bends operating under continuous or cyclic heat conditions Features • Outstanding high-temperature strength – Performs effectively up to 1150°C with excellent resistance to scaling and oxidation • Enhanced weldability – Low carbon content minimizes the risk of sensitization and intergranular corrosion after welding • Outer U-bend coverage – Designed for targeted protection where erosion and thermal impact are most severe • Precision fitment – Manufactured to exact tube radius and diameter specifications for tight, vibration-free installation • Quick installation – Easily mounted using clamps, tack welds, or stainless steel banding without system disassembly • Long-term durability – Resistant to cracking, scaling, and corrosion under thermal fatigue, reducing maintenance and downtime Applications • thermal power plants – Installed on U-bend tube outer curves in superheaters and reheaters for oxidation and erosion protection • petrochemical plants – Used in reformers and cracking furnaces exposed to high-temperature and oxidizing environments • waste heat recovery systems – Protects return bends in WHRBs and HRSGs from hot gas flow, slag buildup, and scaling • chemical and gas processing – Shields bends in high-temperature exchangers and preheaters from corrosive and oxidizing media • furnaces and industrial incinerators – Applied to radiant tubes and burner bends subjected to direct flame and thermal cycling Conclusion The SS 310S U Type Outer Half Round Tube Shield by Ladhani Metal Corporation—manufacturer, supplier, and exporter—is a premium solution for protecting U-bend tube outer arcs in boilers and heat exchangers exposed to severe heat and gas flow conditions. With excellent oxidation resistance, low carbon content for improved weldability, and precision design for long-lasting performance, this shield enhances the lifespan and reliability of thermal systems across a wide range of industrial sectors. For technical consultation, custom orders, or quotations, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are precision-engineered components used to protect boiler and heat exchanger tubes from erosion, scaling, and high-temperature corrosion. These shields are widely applied in industrial systems exposed to thermal cycling, aggressive gases, and particulate flow. Their half-round shape allows for simple and secure installation over straight or curved tube surfaces, extending tube life and reducing maintenance needs. SS 310 U Type Outer Half Round Tube Shield The SS 310 U Type Outer Half Round Tube Shield is made from high-temperature austenitic stainless steel, offering exceptional resistance to oxidation, scaling, and thermal fatigue. This outer U-type configuration is designed specifically to protect the outer curvature of U-bend tubes in extreme heat environments, such as boilers, superheaters, reformers, and heat exchangers. The high chromium and nickel content in SS 310 ensures superior performance under cyclic heating and in the presence of oxidizing and carburizing gases. • Outer U Type Half Round Tube Shield – Provides a protective barrier over the external arc of U-bend tubes, shielding against high-velocity flue gas erosion, slag accumulation, and elevated temperature exposure. Ladhani Metal Corporation supplies SS 310 U Type Outer Half Round Tube Shields engineered for high-performance applications in power, petrochemical, and thermal processing industries. Chemical Composition of SS 310 – High-Temperature Austenitic Stainless Steel • Carbon (C): ≤ 0.25% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.50% • Chromium (Cr): 24.0 – 26.0% • Nickel (Ni): 19.0 – 22.0% • Iron (Fe): Balance Applications: Ideally suited for high-temperature, oxidizing, and mildly carburizing environments such as thermal reactors, flue gas ducts, and furnace systems. Uses • Protection of outer U-bend surfaces in superheaters and reheaters in thermal and captive power plants • Shielding return bends in petrochemical and refinery furnaces exposed to flue gas erosion and thermal cycling • Outer arc protection in waste heat recovery boilers (WHRBs) and HRSGs subjected to slag buildup and gas turbulence • Used in heat exchanger tubes in high-temperature process gas heating systems and steam reformers • Suitable for chemical processing, metallurgical, and furnace industries requiring resistance to extreme heat and oxidation Features • Excellent high-temperature performance – Withstands continuous service in temperatures up to 1150°C with resistance to scaling and oxidation. • Superior oxidation and corrosion resistance – High chromium and nickel content ensures long-term protection in oxidizing and carburizing environments. • Outer bend protection – Specifically shaped for coverage of the most exposed outer arc of U-bend tubes in heat-affected zones. • Custom fit design – Fabricated to match precise tube diameters and bend radii for tight, stable installation without movement. • Easy installation – Quick and secure mounting with clamps, stainless steel banding, or tack welding, eliminating the need for system disassembly. • Long-lasting durability – Reduces erosion, scaling, and heat fatigue, increasing tube service life and reducing maintenance frequency. Applications • thermal power plants – Installed on outer arcs of U-bend tubes in superheaters to prevent oxidation, erosion, and thermal cracking in high-temperature zones. • petrochemical industries – Shields tubes in reformers, process heaters, and crackers exposed to carburizing gases and heat cycling. • waste heat recovery systems – Protects outer bend surfaces in WHRBs and HRSGs from scale buildup, flue gas impact, and slag abrasion. • chemical plants – Suitable for use in heat exchangers and high-temperature reactors handling acidic or oxidizing gas streams. • furnace and incinerator systems – Ideal for radiant tubes, burners, and heat exchanger bends in high-flame and high-velocity environments. Conclusion The SS 310 U Type Outer Half Round Tube Shield by Ladhani Metal Corporation is an advanced protective solution for safeguarding U-bend tube sections in high-temperature and aggressive gas environments. With outstanding oxidation resistance, thermal durability, and structural stability, this shield is ideal for power generation, petrochemical, and industrial heating systems. Precision-engineered for a secure fit and ease of installation, it offers long-term performance and reliable protection under severe operating conditions. For technical consultation, custom orders, or quotations, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are precision-engineered components used to protect boiler and heat exchanger tubes from erosion, scaling, and high-temperature corrosion. These shields are widely applied in industrial systems exposed to thermal cycling, aggressive gases, and particulate flow. Their half-round shape allows for simple and secure installation over straight or curved tube surfaces, extending tube life and reducing maintenance needs. 1Cr20Ni14Si2 U Type Half Round Tube Shield The 1Cr20Ni14Si2 U Type Half Round Tube Shield is manufactured from a high-temperature austenitic stainless steel alloy designed for demanding thermal environments. Composed primarily of chromium and nickel with enhanced silicon content, this alloy provides outstanding resistance to oxidation, scaling, carburization, and thermal fatigue. It is particularly effective in shielding U-bend tube sections within boilers, reformers, and heat recovery systems where prolonged exposure to high heat and reactive gases can degrade performance. The U-type configuration ensures full coverage of the inner and outer arcs of curved tubes, delivering comprehensive protection against mechanical and thermal damage. • Outer U Type Half Round Tube Shield – Protects the outer curvature of U-bends from high-temperature flue gas erosion, slag deposits, and oxidizing environments. • Inner U Type Half Round Tube Shield – Shields the inner bend arc from thermal stress cracking, scale formation, and turbulence-induced wear. Ladhani Metal Corporation provides 1Cr20Ni14Si2 U Type Half Round Tube Shields for industries requiring reliable, long-term protection in aggressive high-temperature service conditions. Chemical Composition of 1Cr20Ni14Si2 – Heat-Resistant Austenitic Stainless Steel • Carbon (C): ≤ 0.15% • Manganese (Mn): ≤ 1.50% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.030% • Silicon (Si): 1.50 – 2.50% • Chromium (Cr): 19.0 – 21.0% • Nickel (Ni): 13.0 – 15.0% • Iron (Fe): Balance Applications: Ideal for continuous and cyclic high-temperature systems where resistance to oxidation, thermal fatigue, and carburization is critical. Uses • Protection of U-bend tubes in superheaters and reheaters in power generation systems • Shielding of return bends in waste heat recovery boilers and HRSGs operating under high flue gas flow • Coverage for curved tube sections in reformers, cracking furnaces, and thermal oxidizers • Safeguarding tube bends in heat exchangers, condensers, and process gas heating systems • Applicable in chemical, metallurgical, and energy industries where extreme thermal cycling and gas exposure occur Features • Excellent oxidation resistance – Chromium and silicon-rich composition provides strong protection against scaling in high-temperature, oxidizing atmospheres. • Superior thermal fatigue performance – Maintains mechanical strength and dimensional stability under rapid temperature fluctuations. • Dual-arc shielding – Available in inner and outer U-type configurations for total protection of return bends in heat exchanger systems. • Precision engineered – Manufactured to match tube diameter and bend radius, ensuring tight, secure installation without vibration or misalignment. • Easy to install – Can be quickly mounted using banding, clamps, or tack welds without the need to disassemble tube bundles. • Long service life – Designed for demanding environments, reducing maintenance frequency and enhancing overall system efficiency. Applications • thermal power plants – Installed in U-bends of superheaters and reheaters to prevent heat-induced scaling, erosion, and fatigue cracking. Improves reliability and heat transfer efficiency. • petrochemical and refinery units – Used in process heaters, reformers, and thermal units where high-temperature gas exposure is constant. Provides stable, long-term protection. • waste heat recovery units – Shields U-shaped tubes in WHRBs and HRSGs from slag deposits, oxidizing gases, and temperature cycling stress. • chemical industries – Ideal for ammonia synthesis, methanol production, and gas reforming systems exposed to thermal shock and oxidizing media. • metal and glass manufacturing – Protects curved tubes in furnaces and preheaters exposed to abrasive and high-heat environments. Conclusion The 1Cr20Ni14Si2 U Type Half Round Tube Shield by Ladhani Metal Corporation is a high-performance solution for protecting U-bend tube sections in the most demanding thermal and chemical environments. With excellent resistance to oxidation, carburization, and thermal fatigue, this shield is ideal for use in power plants, refineries, chemical processing units, and high-temperature industrial systems. Designed for precision fit and easy installation, it provides dependable, long-lasting protection that reduces maintenance and extends equipment service life. For technical consultation, custom orders, or quotations, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are precision-engineered components used to protect boiler and heat exchanger tubes from erosion, scaling, and high-temperature corrosion. These shields are widely applied in industrial systems exposed to thermal cycling, aggressive gases, and particulate flow. Their half-round shape allows for simple and secure installation over straight or curved tube surfaces, extending tube life and reducing maintenance needs. 1Cr18Ni9Ti U Type Half Round Tube Shield The 1Cr18Ni9Ti U Type Half Round Tube Shield is specifically designed for protection of U-bend tube sections in high-temperature heat exchangers, boilers, and superheaters. Manufactured from 1Cr18Ni9Ti, a titanium-stabilized austenitic stainless steel equivalent to AISI 321, this shield delivers excellent resistance to intergranular corrosion, high-temperature oxidation, and thermal fatigue. The titanium addition prevents chromium carbide precipitation during welding or long-term heat exposure, making it ideal for use in welded structures subjected to continuous heating cycles. • Outer U Type Half Round Tube Shield – Provides robust protection to the outer curve of U-bends against hot gas erosion, flame impingement, and scaling. • Inner U Type Half Round Tube Shield – Safeguards the inner arc of the bend from localized wear, slag buildup, and thermal degradation. Ladhani Metal Corporation manufactures and exports 1Cr18Ni9Ti U Type Half Round Tube Shields to industries requiring high-performance shielding in aggressive thermal and chemical service environments, particularly where welding is involved. Chemical Composition of 1Cr18Ni9Ti – Titanium-Stabilized Austenitic Stainless Steel • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 17.0 – 19.0% • Nickel (Ni): 8.0 – 11.0% • Titanium (Ti): ≥ 5 × C content • Iron (Fe): Balance Applications: Suitable for high-temperature environments where welded tube systems are exposed to flue gases, thermal cycling, and corrosive atmospheres. Uses • Protection of U-bend tubes in reheaters and superheaters in thermal power plants • Shielding tube bends in waste heat recovery boilers and steam reformers • Coverage for curved tubes in high-temperature chemical process equipment • Guarding return bends in condensers and evaporators subject to scaling and oxidation • Ideal for systems requiring welded tube shields with resistance to intergranular corrosion Features • Titanium stabilization – Prevents sensitization and intergranular corrosion in welded or heat-affected zones, ensuring long-term structural reliability. • Excellent high-temperature resistance – Performs reliably under continuous thermal exposure, resisting scaling and surface degradation. • Complete bend protection – Available in both inner and outer U-type configurations for full shielding of curved tube areas. • Tight fit and customization – Manufactured to precise dimensions matching tube radius and diameter for secure, stable installation. • Easy to mount – Designed for hassle-free installation using clamps, tack welding, or banding without requiring tube removal. • Versatile performance – Suitable for oxidizing and mildly corrosive environments involving high heat and mechanical stress. Applications • thermal power stations – Protects U-bend tubes in critical heat transfer sections against heat-induced wear and gas corrosion. Enhances operational lifespan and safety. • petrochemical and refinery plants – Used in process heaters, reformers, and exchangers exposed to flue gases and thermal cycling. Maintains performance under continuous operation. • waste heat recovery systems – Shields curved tubes from erosion and scaling in gas recovery units and economizers. Improves durability in high-velocity environments. • chemical industries – Applied to tube bends in reactors, steam heaters, and evaporators where corrosion and temperature resistance are essential. • boiler systems and HRSGs – Provides reliable protection against fatigue, oxidation, and slag accumulation in high-temperature return bends. Conclusion The 1Cr18Ni9Ti U Type Half Round Tube Shield from Ladhani Metal Corporation is an advanced solution for protecting U-bend tube sections in thermally aggressive and welded environments. Its titanium-stabilized composition offers superior resistance to intergranular corrosion, oxidation, and thermal stress. Custom-engineered for precision fit and available in dual-sided configurations, this tube shield enhances system reliability and reduces maintenance needs in power, chemical, and industrial heating systems. For technical consultation, custom orders, or quotations, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are precision-engineered components used to protect boiler and heat exchanger tubes from erosion, scaling, and high-temperature corrosion. These shields are widely applied in industrial systems exposed to thermal cycling, aggressive gases, and particulate flow. Their half-round shape allows for simple and secure installation over straight or curved tube surfaces, extending tube life and reducing maintenance needs. SS 420 U Type Half Round Tube Shield The SS 420 U Type Half Round Tube Shield is manufactured from hardenable martensitic stainless steel, providing robust mechanical strength, surface hardness, and oxidation resistance in high-temperature service environments. Designed specifically for U-bend sections in heat exchangers, boilers, and superheaters, this shield offers dependable protection against scaling, thermal fatigue, and particulate erosion. The U-type configuration enables targeted shielding of both the inner and outer arcs of tube bends—critical areas where temperature gradients and gas velocity are highest. • Outer U Type Half Round Tube Shield – Protects the outer curve of U-bends from slag accumulation, flame impingement, and surface wear caused by high-velocity gas flow. • Inner U Type Half Round Tube Shield – Shields the inner arc against turbulence-induced erosion, scaling, and corrosion under thermal stress conditions. Ladhani Metal Corporation supplies SS 420 U Type Half Round Tube Shields tailored to meet the demands of thermal power, petrochemical, and process industries operating in elevated temperature ranges with limited corrosive exposure. Chemical Composition of SS 420 – Hardenable Martensitic Stainless Steel • Carbon (C): 0.15 – 0.40% • Manganese (Mn): ≤ 1.00% • Phosphorus (P): ≤ 0.040% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 12.0 – 14.0% • Nickel (Ni): ≤ 0.75% • Iron (Fe): Balance Applications: Ideal for systems requiring wear resistance, oxidation stability, and mechanical strength in dry, heat-intensive environments. Uses • Protection of U-bend tubes in thermal power plant superheaters and reheaters • Coverage for curved tube sections in WHRBs and HRSGs exposed to abrasive gas flow • Shielding tube bends in chemical reactors and reformers where thermal shock and particulate wear are common • Erosion prevention in return bends of condensers, evaporators, and economizers • Suitable for heat exchanger systems with low moisture and minimal chemical corrosion Features • Excellent surface hardness – SS 420 can be heat-treated for increased hardness and wear resistance, making it suitable for erosive and abrasive service. • Good oxidation resistance – Performs effectively in dry air at elevated temperatures, helping prevent surface scaling and material degradation. • Full bend protection – Offered in both inner and outer U-type forms to ensure total shielding of critical tube bend areas. • Tight and secure fit – Engineered to match tube radius and diameter, ensuring vibration-free performance and minimal exposure. • Simple installation – Can be easily mounted using banding, clamping, or light tack welding without requiring full system shutdown. • Cost-effective solution – Provides a balance of performance and affordability for moderately aggressive service conditions. Applications • thermal and captive power plants – Used on U-bends in reheaters and superheaters to combat flue gas erosion and temperature cycling. Ensures better tube life and heat retention. • refinery and process industries – Suitable for return bends in units with dry, high-temperature gas flow and minimal moisture-induced corrosion. • waste heat recovery systems – Shields U-shaped tubes in WHRBs from slag, particulate impact, and scale buildup. • cement and glass industries – Installed on high-temperature tubes exposed to solid-laden gas streams for wear resistance and surface stability. • chemical plants – Applied in select heat exchanger areas where scaling and erosion are more critical than chemical corrosion. Conclusion The SS 420 U Type Half Round Tube Shield by Ladhani Metal Corporation offers a rugged and efficient solution for protecting U-bend tubes exposed to heat, slag, and abrasive gas flow. With its ability to resist scaling, erosion, and surface fatigue, SS 420 is ideal for industries operating in dry, high-temperature environments. Precision fit, dual-arc protection, and easy installation make these shields a valuable addition to any boiler or heat exchanger system. For technical consultation, custom orders, or quotations, please contact Ladhani Metal Corporation.