'system pressure containment'

DIN 2627 Carbon Steel flanges PN 400 are high-strength blind flanges designed for use in high-pressure applications across a wide range of industrial systems. Manufactured in accordance with the DIN 2627 standard, these flanges are primarily used to isolate piping systems by sealing off the end of a pipeline or vessel opening. The PN 400 pressure rating (400 bar / 5800 psi) ensures reliable performance under intense pressure and mechanical stress. Carbon steel flanges offer excellent tensile strength, impact resistance, and structural integrity, making them a cost-effective solution for systems where corrosion resistance is not the primary concern. Typically used in applications involving water, steam, oil, and gas, DIN 2627 carbon steel blind flanges are well-suited for power plants, refineries, petrochemical facilities, and general industrial systems. Ladhani Metal Corporation is a trusted global manufacturer and exporter of carbon steel flanges, producing components that meet rigorous international standards for material quality, dimensional accuracy, and pressure containment. Pressure Rating: • PN 400 (400 bar / 5800 psi): Suitable for extremely high-pressure systems in industrial pipelines and mechanical installations. Flange Type: • Blind Flanges Solid, non-bored flanges used to terminate flow or provide system isolation. Commonly used for pressure testing, maintenance access, and future expansion. • Flat Face (FF) Flanges Flat sealing surfaces designed for use with full-face gaskets and flat-faced mating flanges. Promotes even bolt loading and effective sealing under high-pressure conditions. Carbon Steel Grades and Composition: ASTM A105 (Forged Carbon Steel) • Carbon (C): ≤ 0.35% • Manganese (Mn): 0.60 – 1.05% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.040% • Silicon (Si): 0.10 – 0.35% Applications: Commonly used for high-temperature and high-pressure systems. Ideal for oil and gas, steam, and hydraulic systems. ASTM A350 LF2 (Low-Temperature Carbon Steel) • Carbon (C): ≤ 0.30% • Manganese (Mn): 0.60 – 1.35% • Silicon (Si): 0.15 – 0.30% • Nickel (Ni): ≤ 1.0% Applications: Suitable for sub-zero temperature services such as cryogenic systems, LNG processing, and cold-weather pipelines. Applications of DIN 2627 Carbon Steel Flanges PN 400: • Oil and Gas Transmission Lines Used in pipeline systems and refineries handling hydrocarbons under high pressure. • Steam and Power Generation Plants Ideal for high-pressure steam lines, condensate systems, and boiler feedwater applications. • Petrochemical and Chemical Industries Suitable for handling neutral and non-aggressive chemical fluids and process gases. • Water Treatment and Pumping Stations Used in high-pressure water systems, including pumping stations, pressure regulators, and testing units. • Heating, Ventilation, and Air Conditioning (HVAC) Employed in high-pressure chilled water and steam systems for industrial facilities. • General Manufacturing and Engineering Systems Reliable for structural piping systems in factories and mechanical installations. Key Features: • Compliant with DIN 2627 specifications • PN 400 pressure rating for ultra-high-pressure systems • Blind flange design allows for system isolation and pressure containment • Flat face design compatible with full-face gaskets and flat mating surfaces • Manufactured from forged carbon steels like ASTM A105 and A350 LF2 • Excellent strength, ductility, and impact resistance • Economical and durable for non-corrosive environments • Widely used across oil and gas, power, chemical, and water treatment sectors • Custom sizes, pressure classes, surface coatings, and face types available upon request Conclusion: DIN 2627 Carbon Steel Flanges PN 400 from Ladhani Metal Corporation are engineered for high-performance applications requiring strength, pressure retention, and reliability in demanding industrial environments. Whether used in power plants, oil pipelines, or steam systems, these flanges provide durable and cost-effective sealing for critical operations. Contact Ladhani Metal Corporation for product specifications, technical support, or custom solutions tailored to your piping system requirements.

DIN 2627 Monel flanges PN 400 are high-performance blind flanges crafted for ultra-high-pressure systems where superior corrosion resistance, durability, and structural integrity are critical. Compliant with the DIN 2627 standard, these flanges are specifically designed to close off the ends of pipelines in extreme service environments, including highly corrosive marine atmospheres, acidic and alkaline chemical processes, and high-temperature applications. With a PN 400 rating (400 bar / 5800 psi), these flanges ensure leak-free operation under intense pressure and challenging conditions. Made from Monel alloys—primarily Monel 400 and Monel K500—these flanges are widely utilized in offshore oil rigs, naval applications, chemical processing, and power generation systems. Ladhani Metal Corporation is a global leader in manufacturing and exporting DIN-standard Monel flanges, ensuring compliance with international requirements for pressure containment, corrosion resistance, and metallurgical consistency. Pressure Rating: • PN 400 (400 bar / 5800 psi): Engineered for extremely high-pressure piping systems in critical and hazardous service environments where reliable sealing is essential. Flange Type: • Blind Flanges Solid, non-bored flanges used to seal piping systems or terminate flow paths. Ideal for pressure testing, system isolation, and future expansion. • Flat Face (FF) Flanges Designed with a flat sealing surface for use with full-face gaskets and flat mating components. Ensures uniform load distribution and optimal sealing performance. Monel Grades and Composition: Monel 400 (UNS N04400) • Nickel (Ni): ≥ 63% • Copper (Cu): 28 – 34% • Iron (Fe): ≤ 2.5% • Manganese (Mn): ≤ 2% • Silicon (Si): ≤ 0.5% • Carbon (C): ≤ 0.3% Applications: Outstanding resistance to seawater, hydrofluoric acid, alkalis, and other corrosive media. Widely used in marine equipment, chemical processing, and heat exchangers. Monel K500 (UNS N05500) • Nickel (Ni): ≥ 63% • Copper (Cu): 27 – 33% • Aluminum (Al): 2.3 – 3.15% • Titanium (Ti): 0.35 – 0.85% • Iron (Fe): ≤ 2% • Carbon (C): ≤ 0.25% Applications: Combines the corrosion resistance of Monel 400 with enhanced strength and hardness. Suitable for high-stress components like shafts, valve parts, and pump systems in corrosive environments. Applications of DIN 2627 Monel Flanges PN 400: • Offshore Oil and Gas Platforms Ideal for subsea systems exposed to high salinity, pressure, and corrosive gases such as hydrogen sulfide. • Marine and Shipbuilding Preferred in piping systems, ballast lines, and propulsion equipment exposed to seawater and biofouling agents. • Chemical and Petrochemical Plants Used in process systems handling caustic solutions, hydrofluoric acid, and strong alkalis at elevated pressures. • Heat Exchangers and Condensers Excellent thermal conductivity and corrosion resistance make Monel suitable for harsh thermal cycling conditions. • Nuclear and Power Generation Resilient in high-radiation and chemical-laden environments found in cooling systems and high-pressure steam lines. • Aerospace and Defense Used in fuel and hydraulic lines where strength and resistance to high-pressure corrosive media are critical. Key Features: • Manufactured according to DIN 2627 standards • Rated for PN 400 high-pressure operations • Blind flange design ensures reliable sealing and flow isolation • Flat face configuration for full-face gasket compatibility • Available in Monel 400 and Monel K500 grades • Exceptional resistance to corrosion by seawater, acids, and alkalis • High strength and durability in extreme service environments • Widely used in marine, chemical, nuclear, oil and gas, and aerospace industries • Custom configurations, sizes, and material options available on request Conclusion: DIN 2627 Monel Flanges PN 400 from Ladhani Metal Corporation are engineered for mission-critical applications where long-term durability, corrosion resistance, and high-pressure performance are mandatory. Whether you need protection against seawater, alkalis, or aggressive process chemicals, these flanges provide robust, leak-free service in the harshest operating environments. Contact Ladhani Metal Corporation for expert guidance, custom engineering, and dependable supply of Monel flange solutions tailored to your specific needs

DIN 2627 Inconel flanges PN 400 are premium-grade blind flanges engineered for ultra-high-pressure applications requiring exceptional corrosion resistance, heat resistance, and mechanical strength. Manufactured in accordance with the DIN 2627 standard, these flanges are designed to seal off the ends of piping systems, especially in extreme environments involving high temperatures, aggressive chemicals, or seawater exposure. The PN 400 rating (400 bar / 5800 psi) ensures performance under intense pressure conditions. Produced using high-performance nickel-based alloys such as Inconel 600, Inconel 625, and Inconel 718, these flanges are used extensively in aerospace, chemical processing, offshore oil and gas, marine, and power generation industries. Ladhani Metal Corporation is a leading global manufacturer and exporter of Inconel flanges, supplying components that conform to international standards for material integrity, pressure containment, and corrosion resistance. Pressure Rating: • PN 400 (400 bar / 5800 psi): Suitable for high-pressure piping systems in critical applications where maximum sealing and durability are essential. Flange Type: • Blind Flanges Solid, non-bored flanges used to isolate piping systems or terminate flow. Ideal for pressure testing, maintenance, and future pipeline expansions. • Flat Face (FF) Flanges Designed with a flat sealing surface for use with full-face gaskets and flat mating components, ensuring even load distribution and effective sealing. Inconel Grades and Composition: Inconel 600 (UNS N06600) • Nickel (Ni): ≥ 72% • Chromium (Cr): 14 – 17% • Iron (Fe): 6 – 10% • Manganese (Mn): ≤ 1% • Silicon (Si): ≤ 0.5% • Carbon (C): ≤ 0.15% • Sulfur (S): ≤ 0.015% Applications: Excellent resistance to oxidation, carburization, and chloride-ion stress corrosion cracking. Used in furnace components, heat exchangers, and food processing equipment. Inconel 625 (UNS N06625) • Nickel (Ni): ≥ 58% • Chromium (Cr): 20 – 23% • Molybdenum (Mo): 8 – 10% • Niobium + Tantalum (Nb + Ta): 3.15 – 4.15% • Iron (Fe): ≤ 5% • Carbon (C): ≤ 0.10% • Manganese (Mn): ≤ 0.5% • Silicon (Si): ≤ 0.5% Applications: Outstanding corrosion and fatigue resistance in seawater and chemical environments. Common in marine, aerospace, and offshore industries. Inconel 718 (UNS N07718) • Nickel (Ni): 50 – 55% • Chromium (Cr): 17 – 21% • Iron (Fe): Balance • Niobium + Tantalum (Nb + Ta): 4.75 – 5.5% • Molybdenum (Mo): 2.8 – 3.3% • Titanium (Ti): 0.65 – 1.15% • Aluminum (Al): 0.2 – 0.8% Applications: High strength and oxidation resistance up to 700°C. Used in jet engines, gas turbines, and high-pressure valves. Applications of DIN 2627 Inconel Flanges PN 400: • Offshore Oil and Gas Platforms Withstands high-pressure, high-salinity, and corrosive environments in subsea pipelines and risers. • Chemical Processing Plants Ideal for systems handling oxidizers, acids, solvents, and reactive compounds at high temperatures and pressures. • Aerospace and Jet Propulsion Used in fuel systems, hydraulic lines, and turbine enclosures where extreme heat and stress are common. • Nuclear and Power Generation Suited for high-pressure reactor lines and heat exchanger systems exposed to radiation, heat, and corrosive media. • Desalination and Seawater Systems Highly resistant to chloride-induced pitting and crevice corrosion. • High-Temperature and Reactive Media Systems Perfect for isolating systems exposed to thermal cycling and chemical attack. Key Features: • Manufactured to DIN 2627 standards • Rated for PN 400 ultra-high-pressure systems • Blind flange design for sealing pipe ends or testing access • Flat face design for even gasket compression and sealing • Available in Inconel 600, 625, and 718 • Excellent resistance to oxidation, acids, chlorides, and high heat • High mechanical strength and fatigue resistance • Used in critical industries including aerospace, marine, oil and gas, and chemical processing • Custom sizes, alloys, pressure ratings, and surface finishes available on request Conclusion: DIN 2627 Inconel Flanges PN 400 from Ladhani Metal Corporation offer exceptional performance and reliability in the most demanding service conditions. Whether your system involves corrosive chemicals, high-pressure steam, or marine exposure, these blind flanges deliver secure sealing, longevity, and safety. Contact Ladhani Metal Corporation for material selection, technical support, or custom solutions tailored to your high-performance application.

DIN 2576 Super Duplex Flanges PN 10 are high-performance, slip-on flanges manufactured from super duplex stainless steel, designed for piping systems operating under low to medium pressures. Produced in accordance with the DIN 2576 standard, these flanges offer exceptional mechanical strength combined with superior corrosion resistance, making them ideal for highly aggressive and chloride-laden environments. The slip-on design facilitates easy placement over the pipe and enables secure welding, ensuring precise alignment and a reliable seal across various industrial applications. Ladhani Metal Corporation is a trusted manufacturer and global supplier of super duplex steel flanges, providing products that meet stringent international standards in terms of dimensions, metallurgy, and performance. DIN 2576 super duplex flanges are especially valued in industries where resistance to pitting, crevice corrosion, and stress corrosion cracking is critical, including marine, chemical, and wastewater systems. Pressure Rating: • PN 10 (10 bar / 145 psi): Designed for moderate-pressure systems demanding long-term durability in corrosive environments. Flange Types: • Slip-On Flanges These flanges slide over the pipe and are welded on both sides, offering ease of installation and secure mechanical performance. • Flat Face (FF) Flanges Designed for use with flat gaskets and mating surfaces, these flanges are ideal for applications involving non-metallic or cast components. Super Duplex Stainless Steel Grades and Composition: Super Duplex 2507 (UNS S32750) Composition: • Chromium (Cr): 24.0 – 26.0% • Nickel (Ni): 6.0 – 8.0% • Molybdenum (Mo): 3.0 – 5.0% • Nitrogen (N): 0.24 – 0.32% • Iron (Fe): Balance Applications: Super Duplex 2507 delivers superior yield strength and corrosion resistance, particularly in extreme environments. It is commonly used in subsea equipment, chemical containment, high-pressure systems, and offshore platforms exposed to seawater and chlorides. Applications of DIN 2576 Super Duplex Flanges: • Offshore and Marine Engineering Well-suited for seawater cooling systems, risers, and structural elements exposed to marine conditions. • Chemical and Petrochemical Industries Ideal for conveying highly corrosive fluids, acids, and chlorides in reactors and pipelines. • Water Treatment and Desalination Applied in reverse osmosis systems, brine piping, and high-salinity water circuits requiring enhanced corrosion resistance. • Pulp and Paper Industry Offers protection against aggressive bleaching agents and chemical fluids under pressurized conditions. • Oil and Gas Used in critical systems like separators, manifolds, and sour gas applications. • Structural and Pressure Vessel Fabrication Preferred for tanks and pressure vessels operating under corrosive and mechanical stress. Key Features: • Fully compliant with DIN 2576 standard specifications • PN 10 pressure rating for use in moderate-pressure applications • Superior resistance to chloride-induced pitting, crevice corrosion, and stress corrosion cracking • High mechanical strength reduces material thickness and overall system weight • Manufactured using Super Duplex 2507 and other super duplex alloys • Slip-on design ensures straightforward alignment and welding • Flat face variants suitable for a wide range of gaskets and connection types • Widely used across marine, chemical, oil and gas, and water treatment sectors • Custom sizes, face configurations, and finishes available on request Conclusion: DIN 2576 Super Duplex Flanges PN 10 by Ladhani Metal Corporation offer exceptional strength and corrosion resistance for highly demanding industrial environments. Available in Super Duplex 2507 and other super duplex grades, these flanges ensure reliable performance in systems facing high salinity, pressure, and temperature. For technical guidance, grade selection, or customized project solutions, reach out to Ladhani Metal Corporation today.

DIN 2545 is a German standard for stainless steel flanges, designed for use in piping systems requiring durability, corrosion resistance, and strong mechanical properties. These flanges are commonly used in industries like chemical, petrochemical, food processing, and more. They come in various sizes and configurations for secure and leak-proof connections. The PN 40 rating indicates that these flanges can withstand pressures up to 40 bar (approximately 580 psi) at normal temperatures (typically 20°C or 68°F). Types of DIN 2545 SS Flanges: · Slip-On Flange (SO): A flange that slides over the pipe and is welded inside and outside for a secure connection. · Weld Neck Flange (WN): A flange with a tapered neck that allows for a stronger weld, commonly used in high-pressure applications. · Blind Flange: A flange with no bore used to seal the end of a pipe or vessel. · Threaded Flange: A flange with internal threads that allows it to be screwed onto a pipe without welding. · Socket Weld Flange: Designed for pipes to fit into the socket of the flange, offering good pressure containment in high-temperature applications. · Lap Joint Flange: Used with a stub end and ideal for applications requiring frequent disassembly. Grades and Their Chemical Composition: · Grade 304 (AISI 304): This grade has a chemical composition consisting of 18-20% chromium, 8-10.5% nickel, with a carbon content of up to 0.08%. It also contains small amounts of manganese (2.00-2.50%), silicon (≤ 1.00%), phosphorus (≤ 0.045%), and sulfur (≤ 0.030%), while the rest is iron. It is widely used due to its good corrosion resistance, weldability, and formability. · Grade 316 (AISI 316): The chemical composition of 316 includes 16-18% chromium, 10-14% nickel, and 2-3% molybdenum. It also contains up to 0.08% carbon, 2.00-2.50% manganese, and ≤ 1.00% silicon, with iron making up the balance. The addition of molybdenum provides improved resistance to corrosion, particularly in chloride environments, making it suitable for marine and chemical industries · Grade 321 (AISI 321): This grade has a chemical composition with 17-19% chromium, 9-12% nickel, and a maximum carbon content of 0.08%. It also contains 2.00-2.50% manganese, ≤ 1.00% silicon, and small amounts of phosphorus (≤ 0.045%) and sulfur (≤ 0.030%). The remainder is iron. Grade 321 is stabilized with titanium to prevent sensitization and is highly resistant to intergranular corrosion, making it ideal for high-temperature applications like in the aerospace and chemical industries. Applications: DIN 2545 Stainless Steel Flanges (PN 40) are widely used in various industries due to their superior strength, corrosion resistance, and versatility. These flanges are specifically designed to handle higher pressure ratings (PN 40), making them ideal for demanding applications. Some of the key applications include: -Chemical Processing: Used in the manufacturing of chemicals, pharmaceuticals, and petrochemicals, where high resistance to corrosion is essential. -Oil and Gas Industry: For pipelines, pumps, and valves that transport oil, gas, and other fluids under high pressure. -Water Treatment Plants: Employed in water and wastewater management systems to connect piping and ensure leak-free connections under high pressure. -Food and Beverage Industry: In production systems where hygiene and corrosion resistance are critical, especially in food processing and dairy plants. -Power Generation: For use in power plants in systems such as steam lines and cooling circuits that operate under high-pressure conditions. -Marine and Offshore: Often used in ships, platforms, and offshore structures that are exposed to harsh environmental conditions. -HVAC Systems: In high-pressure heating, ventilation, and air conditioning applications. DIN 2545 Stainless Steel Flanges (PN 40) offer both durability and reliability in these high-pressure applications, ensuring safe and efficient performance in various industries. Conclusion: DIN 2545 SS flanges provide a reliable and robust solution for piping systems across various industries. These flanges are widely used in applications ranging from general industrial use to highly specialized sectors like aerospace, marine, and chemical processing, ensuring safe and efficient operation in demanding environments. The PN 40 rating guarantees they can withstand medium-to-high pressure systems.

Product Name: titanium plate 4mm Standard: ASTM B265 Material: Gr1 Gr2 Gr5 Gr7 Gr12 Unit Price: $15usd/kg-$48usd/kg Thickness: 0.5-100mm Length: 500-6000mm Or As You Require Width: 500-1000mm Or As You Require Surface: Pickling, Polishing, Sand Blasting

Product name:1 inch titanium plate Grades: Gr5 Standard: ASTM B265 AMS 4911,ASTM F136 Thickness: δ1.0mm, 3.0mm, 6.0mm, 10mm, 12mm, 15mm 16mm, 20mm,25mm,30mm,35mm etc. Width:200-3000mm Length:500-6000mm Supply status: Annealed(M) Package: Carton box or plywood case. MTC: EN10204.3.1 certificate

Product name:titanium plate 6al-4v Unit price:$21.5-$55.8/kg Material: Titanium Grade 5(Ti6Al4V) Standard: ASTM/ASME B265, ASTM/ASME B4911 Demension: Thickness*1000*2000mm Thickness*3000*6000mm (Standard size); Thickness: 0.5mm; 0.8mm; 1.0mm; 1.2mm; 1.5mm; 2.0mm; 3.0mm; 4.0mm ......40mm etc

Product Name: Titanium racks Material: Gr1, Gr2 Application: Electroplating, anodizing etc. Size: Customized Surface: Polished