Half Round Tube Shield Ladhani Metal Corporation manufactures SS 316 Half Round Straight Tube Shields to offer superior protection for straight tubes in boilers, heat exchangers, and steam systems. Fabricated using molybdenum-bearing austenitic stainless steel, SS 316 provides enhanced resistance to pitting, crevice corrosion, and elevated temperature scaling. These shields are ideal for use in aggressive chemical and marine environments, as well as in high-moisture flue gas areas of power and process boilers. SS 316 Half Round Straight Tube Shield The SS 316 Half Round Straight Tube Shield is designed to safeguard the surface of straight tube sections from erosive flue gas, thermal cycling, and chemical corrosion. Its excellent resistance to chloride-induced attack makes it suitable for areas with seawater exposure, acidic gases, or high humidity. These shields are widely installed in power plants, waste heat recovery units, and process steam equipment where corrosion control is critical to extending tube life and maintaining system efficiency. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of SS 316 Half Round Straight Tube Shields, delivering high-performance thermal protection solutions for demanding industrial applications. Material Grade SS 316 – Molybdenum-enhanced austenitic stainless steel with excellent corrosion resistance and thermal strength. Chemical Composition of SS 316 • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 16.0 – 18.0% • Nickel (Ni): 10.0 – 14.0% • Molybdenum (Mo): 2.0 – 3.0% • Iron (Fe): Balance Applications: Effective in corrosive and wet flue gas environments; ideal for marine boilers, chemical process systems, and flue gas zones with chloride presence. Uses • Protection of straight tubes in superheaters and economizers • Installed in chemical process heat exchangers for corrosion control • Used in marine boilers with exposure to salt-laden air • Applied in biomass and waste-to-energy boilers handling corrosive fuels • Shielding of tubes in fertilizer and paper plants with acidic exhaust gases Features • Excellent corrosion resistance – Especially in chloride, acidic, and marine environments • Good scaling resistance – Performs well under high-temperature oxidative conditions • Durable and reliable – Maintains integrity during prolonged exposure to heat and corrosive elements • Easy to install – Available with weld-on, clamp-on, or strapped fixing options • Available in custom dimensions – Designed to match tube size, shape, and installation parameters • Prolongs tube life – Reduces need for frequent replacement and minimizes unplanned shutdowns Applications • thermal power plants – Protects straight boiler tubes against high-temperature corrosion • marine and offshore systems – Withstands saline and humid atmospheres • waste heat recovery – Shields tubes in exhaust zones from ash and corrosive gases • petrochemical and fertilizer industries – Applied to extend the lifespan of steam and heat exchanger tubing • pulp and paper plants – Protects against acidic process byproducts in recovery boilers Conclusion The SS 316 Half Round Straight Tube Shield from Ladhani Metal Corporation is engineered to deliver long-lasting protection in corrosive, high-heat, and moisture-prone environments. Its molybdenum-rich composition provides exceptional defense against chloride corrosion and thermal degradation, making it an essential component for boiler tube maintenance and longevity. For custom sizes, detailed specifications, or bulk orders, contact Ladhani Metal Corporation. #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Salem #Erode #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Hassan #Cuttack #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Gaya #Muzaffarpur #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies

DIN 2634 monel flanges PN 25 are high-performance weld neck flanges manufactured in accordance with the DIN 2634 standard. Specifically engineered for high-pressure applications up to 25 bar (362 psi), these flanges are made from premium Monel alloys, offering excellent corrosion resistance, high strength, and durability in harsh environments. Their robust construction makes them ideal for applications involving aggressive chemical media and seawater where conventional metal flanges may degrade. Ladhani Metal Corporation is a trusted global manufacturer and supplier of Monel flanges, known for advanced manufacturing capabilities, precision machining, and strict adherence to international quality standards. Each flange undergoes thorough inspection and testing to ensure long-term reliability, safety, and resistance to extreme operating conditions. Pressure Rating: • PN 25 (25 bar / 362 psi): Designed for high-pressure systems requiring corrosion-resistant and mechanically robust flange connections. Flange Type: • Weld Neck Flanges Featuring an extended tapered hub, weld neck flanges provide excellent stress distribution at the base, ensuring strong and leak-proof joints in systems exposed to high pressure and thermal cycling. • Flat Face (FF) Flanges Ideal for use with softer gasket materials or in systems connecting to cast components, flat face flanges offer consistent and uniform gasket compression. Monel Grades and Typical Composition: Monel 400 (UNS N04400) – Nickel-Copper Alloy • Nickel (Ni): 63% minimum • Copper (Cu): 28-34% • Iron (Fe): 2.5% maximum • Manganese (Mn): 2.0% maximum • Carbon (C): 0.30% maximum Applications: Preferred in seawater and saltwater service, chemical processing, and marine equipment where excellent corrosion resistance in oxidizing and reducing environments is required. Monel K500 (UNS N05500) – Nickel-Copper Alloy with Additional Strengthening Elements • Nickel (Ni): 63% minimum • Copper (Cu): 28-34% • Iron (Fe): 2.5% maximum • Manganese (Mn): 2.0% maximum • Aluminum (Al) and Titanium (Ti): Added for age hardening Applications: Used in high-strength marine and chemical environments requiring enhanced mechanical properties and corrosion resistance. Applications of DIN 2634 Monel Flanges PN 25: • Offshore and Marine Systems Resists corrosion from seawater, brine, and marine atmospheres while maintaining strength under pressure. • Chemical and Petrochemical Processing Ideal for transporting corrosive media such as acids, alkalis, and chloride solutions at elevated pressures. • Desalination Plants Performs reliably in saltwater treatment and high-pressure water processing systems. • Power Generation Used in systems requiring resistance to erosion and corrosion in high-temperature steam and cooling circuits. • Pharmaceutical and Food Processing Applied in hygienic environments requiring corrosion resistance and chemical inertness. Key Features: • Manufactured in accordance with DIN 2634 dimensional and pressure requirements • PN 25 pressure rating supports high-pressure applications • Excellent resistance to corrosion, erosion, and stress corrosion cracking • Weld neck configuration ensures strong, vibration-resistant joints • Available in Monel 400 and Monel K500 alloys • Custom sizes, pressure classes, and surface finishes available upon request Conclusion: DIN 2634 monel flanges PN 25 from Ladhani Metal Corporation are engineered for demanding conditions where corrosion resistance, mechanical strength, and pressure integrity are essential. These Monel flanges provide long-term durability and reliable performance for advanced applications in marine, chemical, power generation, and industrial systems. For technical consultations, specialized requirements, or pricing information, contact Ladhani Metal Corporation today.

DIN 2632 Monel flanges PN 10 are high-performance weld neck flanges manufactured to meet the DIN 2632 standard, specifically designed for medium-pressure applications up to 10 bar (145 psi). These flanges are made from Monel, a nickel-copper alloy known for its outstanding corrosion resistance, particularly in marine and chemical environments. With excellent mechanical strength and superior durability in highly aggressive conditions, DIN 2632 Monel flanges provide a reliable solution where standard materials may fail. Ladhani Metal Corporation is a leading global manufacturer and supplier of Monel flanges, delivering consistent quality, dimensional accuracy, and full compliance with international standards. Each flange is meticulously tested to ensure optimum performance under demanding industrial conditions. Pressure Rating: • PN 10 (10 bar / 145 psi): Suitable for medium-pressure piping systems requiring high corrosion resistance and mechanical stability. Flange Type: • Weld Neck Flanges Designed with a long tapered hub that ensures precise pipe alignment and reduces localized stress at the flange connection. Ideal for high-integrity, high-strength joints. • Flat Face (FF) Flanges Flat face configuration ensures uniform gasket compression, making them ideal for systems using soft gaskets or connecting to cast components. Monel Grades and Composition: Monel 400 • Nickel (Ni): Minimum 63% • Copper (Cu): 28–34% • Iron (Fe): 2.0–2.5% • Manganese (Mn): ≤ 2.0% • Silicon (Si): ≤ 0.5% • Carbon (C): ≤ 0.3% Applications: Monel 400 is widely used in chemical and marine environments due to its excellent resistance to seawater, acids, and alkalis. It is commonly used in heat exchangers, seawater piping, pumps, and valves handling corrosive media. Monel K500 • Nickel (Ni): 63% minimum • Copper (Cu): 27–33% • Aluminum (Al): 2.3–3.15% • Titanium (Ti): 0.35–0.85% • Iron (Fe): ≤ 2.0% • Carbon (C): ≤ 0.25% Applications: Monel K500 combines the corrosion resistance of Monel 400 with greater strength and hardness due to age-hardening. It is used in marine shafts, chemical processing equipment, oil and gas tools, and high-strength fasteners. Applications of DIN 2632 Monel Flanges PN 10: • Marine and Offshore Ideal for seawater handling systems, shipbuilding, desalination units, and offshore platforms exposed to highly corrosive saltwater environments. • Chemical and Petrochemical Industry Used in pipelines and vessels transporting sulfuric acid, hydrofluoric acid, alkalis, and other aggressive substances. • Oil and Gas Industry Suitable for sour gas environments, offshore rigs, and subsea applications where corrosion and stress resistance are critical. • Power Generation Applied in cooling systems, condensers, and process equipment subjected to brine, steam, and corrosive gases. Key Features: • Fabricated to DIN 2632 specifications • PN 10 pressure rating for medium-pressure service • Weld neck and flat face designs available • Manufactured using Monel 400 and Monel K500 for corrosion-intensive applications • Exceptional resistance to seawater, acids, and alkalis • High strength and toughness even at elevated temperatures • Ideal for marine, chemical, and oil & gas industries • Custom dimensions, finishes, and alloy compositions available upon request Conclusion: DIN 2632 Monel Flanges PN 10 from Ladhani Metal Corporation are engineered to provide superior corrosion resistance, mechanical strength, and long-term reliability in medium-pressure industrial systems. With Monel grades 400 and K500, these flanges are well-suited for harsh environments in the marine, chemical, petrochemical, and offshore sectors. For detailed specifications, custom requirements, or pricing information, contact Ladhani Metal Corporation today.

DIN 2628 Monel flanges PN 250 are high-performance weld neck flanges engineered in compliance with the DIN 2628 standard. Designed for high-pressure applications up to 250 bar (3625 psi), these flanges are constructed from Monel alloys, known for their exceptional resistance to corrosion, particularly in acidic and saline environments. Monel flanges deliver robust mechanical strength and thermal stability, making them suitable for challenging industrial applications that involve fluctuating temperatures, corrosive substances, and high mechanical stress. Ladhani Metal Corporation is a reliable global manufacturer and exporter of Monel flanges, providing products that meet exacting international standards for quality and performance. Our DIN 2628 PN 250 Monel weld neck flanges are extensively used in chemical processing, marine engineering, desalination systems, and offshore oil and gas installations. Known for superior build quality and long-term durability, these flanges ensure safe and efficient operations in pressure-sensitive systems exposed to harsh service conditions. Pressure Rating: • PN 250 (250 bar / 3625 psi): Suitable for systems requiring high-pressure endurance, secure sealing capabilities, and enhanced structural integrity. Flange Type: • Weld Neck Flanges Characterized by a long tapered hub that minimizes stress at the weld junction. Ideal for high-temperature and high-pressure applications. • Flat Face (FF) Flanges Provides an even surface for gasket compression, ensuring reliable sealing. Well-suited for connections involving cast components or brittle materials. Monel Grades and Composition: Monel 400 (UNS N04400) • Nickel (Ni): ≥ 63.0% • Copper (Cu): 28.0 – 34.0% • Iron (Fe): ≤ 2.5% • Manganese (Mn): ≤ 2.0% • Silicon (Si): ≤ 0.5% • Carbon (C): ≤ 0.3% Applications: Offers excellent resistance to seawater, hydrofluoric acid, and alkalis. Commonly used in marine piping, pump shafts, heat exchangers, and chemical processing equipment. Monel K500 (UNS N05500) • Nickel (Ni): ≥ 63.0% • Copper (Cu): 27.0 – 33.0% • Aluminum (Al): 2.3 – 3.15% • Titanium (Ti): 0.35 – 0.85% • Iron (Fe): ≤ 2.0% • Carbon (C): ≤ 0.25% Applications: Precipitation-hardened alloy providing greater strength and hardness than Monel 400. Suitable for valves, springs, and high-strength fasteners in corrosive environments including marine and chemical processing systems. Applications of DIN 2628 Monel Flanges PN 250: • Marine Engineering Highly resistant to saltwater corrosion, suitable for shipbuilding, subsea pipelines, and desalination plants. • Chemical and Petrochemical Processing Performs well in environments containing strong acids, alkalis, and chlorinated solvents. • Offshore Oil and Gas Used in systems that handle sour gas, brine, and other corrosive fluids. • Power and Energy Ideal for condenser systems and piping exposed to high-pressure steam and corrosive environments. • Pulp and Paper Industry Effective in processes involving sulfur compounds and acidic bleaching agents. Key Features: • Designed in accordance with DIN 2628 specifications • Rated for PN 250 (250 bar / 3625 psi) pressure systems • Weld neck configuration ensures superior mechanical strength and fatigue resistance • Flat face option supports uniform gasket pressure distribution • Available in Monel 400 and Monel K500 grades • Excellent corrosion resistance in marine, chemical, and high-saline environments • High mechanical strength and good thermal performance • Custom dimensions, pressure classes, and surface finishes available on request Conclusion: DIN 2628 Monel Flanges PN 250 from Ladhani Metal Corporation are engineered for high-pressure systems operating in some of the most demanding service environments. With excellent resistance to corrosion, superior mechanical properties, and thermal stability, Monel flanges provide reliable, long-term service in critical applications across marine, chemical, and offshore industries. Contact Ladhani Metal Corporation for detailed product specifications, technical support, or to request a customized quote.

DIN 2573 Super Duplex Flanges PN 6 are high-performance, low-pressure flanges engineered from Super Duplex stainless steels, specifically designed for highly corrosive and mechanically demanding environments. These flanges conform to DIN 2573 standards and offer a superior combination of corrosion resistance and tensile strength, making them suitable for critical applications exposed to aggressive chemicals, seawater, and high-pressure fluids. With enhanced resistance to pitting, crevice corrosion, and stress corrosion cracking, Super Duplex flanges are the material of choice for industries requiring durability under extreme service conditions. Ladhani Metal Corporation is a dependable manufacturer and global supplier of Super Duplex flanges, delivering components that meet international quality and performance standards. The DIN 2573 flat flange design ensures ease of installation and reliable sealing in low-pressure systems, even when operating in harsh chemical or marine environments. Pressure Rating: • PN 6 (6 bar / 87 psi): Designed for low-pressure systems where both exceptional corrosion resistance and superior mechanical strength are critical for long-term reliability and safety. Flange Types: • Plate Flanges Flat disc-type flanges used to join piping systems with bolted connections and gasket seals, ensuring tight, leak-free joints in low-pressure operations. • Flat Face (FF) Flanges Provide even load distribution across the sealing surface, ideal for applications involving non-metallic or cast components where flat gaskets are used. • Slip-On Flanges These flanges slip over the pipe and are welded on both the inside and outside, offering simple alignment and reduced fabrication cost for moderate-stress systems. • Custom-Machined Flanges Engineered to specific client requirements, available in a range of Super Duplex grades, with optional face types, dimensions, and surface finishes. Super Duplex Grades and Composition: Super Duplex 2507 (UNS S32750) Composition: • Chromium (Cr): 24.0 – 26.0% • Nickel (Ni): 6.0 – 8.0% • Molybdenum (Mo): 3.0 – 5.0% • Nitrogen (N): 0.24 – 0.32% • Iron (Fe): Balance Applications: Super Duplex 2507 is used in highly corrosive applications requiring high strength and fatigue resistance. Common industries include offshore oil and gas, marine systems, desalination plants, and chemical processing where exposure to chloride-rich and high-pressure environments is prevalent. Super Duplex 32760 (UNS S32760) Composition: • Chromium (Cr): 24.0 – 26.0% • Nickel (Ni): 6.0 – 8.0% • Molybdenum (Mo): 3.0 – 4.0% • Tungsten (W): 0.5 – 1.0% • Copper (Cu): 0.5 – 1.0% • Nitrogen (N): 0.2 – 0.3% • Iron (Fe): Balance Applications: This grade is widely used in oil and gas platforms, subsea pipelines, pressure vessels, and pump components, offering excellent corrosion resistance under fluctuating pressures and temperatures, particularly in seawater and acidic environments. Applications of DIN 2573 Super Duplex Flanges: • Offshore and Subsea Engineering: Ideal for pipelines, risers, and manifolds exposed to saltwater, high pressure, and dynamic stresses. • Chemical Processing Plants: Used in systems handling aggressive chemical media like chlorides, sulfides, and acids, where high corrosion resistance is required. • Oil and Gas Industry: Common in wellhead systems, separators, and refinery units where high mechanical strength and resistance to sulfide stress corrosion are essential. • Power Generation: Used in high-pressure steam systems, flue gas scrubbers, and cooling water systems for their strength and corrosion resistance at elevated temperatures. Key Features: • Compliant with DIN 2573 standard for low-pressure flange systems • Superior resistance to pitting, crevice corrosion, and chloride stress corrosion cracking • Excellent mechanical strength, fatigue resistance, and weldability • Available in Super Duplex 2507, 32760, and other high-alloy grades • Long-lasting performance in aggressive and marine service conditions • Custom sizes, face types, and surface finishes available upon request • Ideal for offshore, oil and gas, power, and chemical process industries Conclusion: DIN 2573 Super Duplex Flanges PN 6 from Ladhani Metal Corporation combine superior corrosion resistance with high mechanical integrity, providing a dependable solution for critical systems operating in aggressive and corrosive environments. Designed in accordance with international standards and backed by expert manufacturing, these flanges offer long-term, leak-free performance in demanding industrial sectors. For customized flange solutions, material selection, or technical assistance, reach out to Ladhani Metal Corporation today. 📞 Contact Ladhani Metal Corporation Website: https://www.ladhanimetal.in/ https://www.ladhanimetal.com/ Email: info@ladhanimetals.com Request a Quote: Custom dimensions, materials, and finishes available upon request.

DIN 2573 Monel Flanges PN 6 are premium-quality, low-pressure plate flanges crafted from Monel alloys, specifically engineered for systems that operate in highly corrosive and aggressive environments. Manufactured in accordance with DIN 2573 standards, these flanges offer excellent resistance to seawater, acids, and high-temperature conditions, making them an ideal choice for industries such as marine engineering, chemical processing, oil and gas, and power generation. The exceptional properties of Monel alloys ensure durability and reliability in applications requiring strong resistance to pitting, crevice corrosion, and stress corrosion cracking. Ladhani Metal Corporation is a trusted manufacturer and global supplier of Monel alloy flanges, delivering high-quality products that meet rigorous international standards. The DIN 2573 flange design ensures easy installation and provides a secure, leak-free connection, even in low-pressure, harsh environments. Pressure Rating: • PN 6 (6 bar / 87 psi): Designed for low-pressure applications in corrosive and high-temperature environments where Monel’s strength and resistance to corrosion are critical for long-term performance. Flange Types: • Plate Flanges Flat flanges ideal for bolted connections in piping systems where gasket sealing is required, providing secure, leak-free operation in low-pressure systems. • Flat Face (FF) Flanges Used with flat gaskets and mating surfaces, ensuring uniform contact and load distribution, particularly when joining with non-metallic components or cast iron systems. • Slip-On Flanges These flanges slip over the pipe, providing easy alignment and easy-to-weld connections, ideal for low-pressure applications with moderate pressure fluctuations. • Custom-Machined Flanges Tailored to meet specific dimensional and material requirements, available in various sizes, grades, and face finishes to suit the needs of custom applications. Monel Grades and Composition: Monel 400 (UNS N04400) Composition: • Nickel (Ni): 63.0 – 70.0% • Copper (Cu): 28.0 – 34.0% • Iron (Fe): ≤ 2.5% • Manganese (Mn), Silicon (Si), Carbon (C): Trace amounts Applications: Monel 400 is widely used in marine environments, chemical processing, and heat exchangers, where it is subjected to both high temperatures and exposure to saltwater or acids. Its superior resistance to corrosion and oxidation makes it a preferred material in demanding applications like pumps, valves, and marine piping systems. Monel K-500 (UNS N05500) Composition: • Nickel (Ni): 63.0 – 70.0% • Copper (Cu): 27.0 – 33.0% • Aluminum (Al): 2.3 – 3.2% • Titanium (Ti): 0.35 – 0.85% • Iron (Fe): ≤ 2.5% Applications: Monel K-500 offers higher strength and hardness compared to Monel 400, making it suitable for applications in oil and gas extraction, marine industries, and aerospace systems, where both corrosion resistance and high mechanical properties are required. Applications of DIN 2573 Monel Flanges: • Chemical and Petrochemical Plants: Monel flanges are ideal for use in chemical reactors, exchangers, and pipelines handling aggressive chemicals like sulfuric acid, hydrochloric acid, and caustics. • Marine and Offshore Engineering: Highly resistant to seawater corrosion, Monel flanges are used extensively in marine piping systems, offshore oil rigs, and shipbuilding applications where exposure to saltwater and harsh weather conditions is frequent. • Oil and Gas Industry: Monel flanges are often used in production platforms, refineries, and pipelines exposed to brine and acidic substances, offering both strength and resistance to corrosion under high-stress conditions. • Power Generation: Used in systems handling high-temperature steam and corrosive environments, Monel flanges provide reliable service for high-performance power plant components. • Desalination and Water Treatment: With their corrosion resistance to saline environments, Monel flanges are also ideal for seawater desalination plants and water treatment facilities. Key Features: • Manufactured according to DIN 2573 standards • Rated for PN 6 low-pressure systems, with exceptional resistance to corrosion • Outstanding performance in highly corrosive, high-temperature environments • Available in Monel 400, Monel K-500, and other Monel alloys • High strength-to-weight ratio for reliable long-term performance • Suitable for marine, offshore, chemical, and power generation applications • Available with custom drilling, surface finishes, and flange faces Conclusion: DIN 2573 Monel Flanges PN 6 from Ladhani Metal Corporation provide unmatched durability, corrosion resistance, and performance in low-pressure applications exposed to challenging chemical, thermal, and environmental conditions. For custom dimensions, material selections, or technical support, contact Ladhani Metal Corporation today.

DIN 2566 Monel flanges PN 16 are high-performance, corrosion-resistant threaded flanges designed for medium-pressure piping systems exposed to aggressive environments such as seawater, acids, and alkalis. These flanges are manufactured in accordance with DIN 2566 standards and are ideal for non-welded connections requiring strength, durability, and resistance to harsh chemicals. Ladhani Metal Corporation is a trusted manufacturer and exporter of Monel flanges, delivering precisely machined components with excellent dimensional accuracy and long service life. These flanges are widely used in marine, chemical, and offshore applications where standard stainless steels or carbon steels may fail due to corrosion. Flange Types: • Threaded (Screwed) Flanges: Enable fast installation and removal without welding, ideal for maintenance-friendly and modular systems. • Raised Face (RF) Flanges: Enhance gasket compression for improved sealing under pressure. • Flat Face (FF) Flanges: Used with flat-faced equipment or non-metallic components in moderate-pressure systems. • Forged Threaded Flanges: Offer enhanced strength and impact resistance due to forging. • Custom-Machined Flanges: Available upon request, tailored to specific dimensional and material needs. Available Monel Grades and Composition: 1. Monel 400 (UNS N04400) • Nickel (Ni): ≥ 63% • Copper (Cu): 28.0 – 34.0% • Iron (Fe): ≤ 2.5% • Manganese (Mn): ≤ 2.0% • Excellent resistance to seawater, steam, salt, and corrosive acids such as hydrofluoric and sulfuric acid. Applications: Used in marine hardware, chemical processing, offshore structures, pump shafts, and heat exchangers. 2. Monel K500 (UNS N05500) • Nickel (Ni): 63.0% min (includes cobalt) • Copper (Cu): 27.0 – 33.0% • Aluminum (Al): 2.30 – 3.15% • Titanium (Ti): 0.35 – 0.85% • Iron (Fe): ≤ 2.0% • Manganese (Mn): ≤ 1.5% • Silicon (Si): ≤ 0.5% • Carbon (C): ≤ 0.25% • Sulfur (S): ≤ 0.01% Applications: Ideal for high-strength, corrosion-resistant components such as pump shafts, marine equipment, fasteners, and valve components in oil & gas, marine, and chemical industries. Applications of DIN 2566 Monel Flanges: • Marine and Shipbuilding: Resistant to saltwater and brine environments • Offshore Oil & Gas Platforms: Corrosion-resistant in harsh subsea conditions • Chemical and Petrochemical Processing: Withstands acids and alkalis, including HF • Pump and Valve Systems: Durable and reliable in corrosive fluid transfer • Heat Exchangers and Condensers: Non-reactive in high-temperature, high-corrosion zones Key Features: • Manufactured to DIN 2566 standard with PN 16 pressure rating • Excellent resistance to corrosion, erosion, and acidic environments • Suitable for chloride-rich and saltwater systems • Non-magnetic and stable in extreme temperature variations • Threaded design allows easy assembly without welding • Supplied with material test certificates, inspection documents, and traceability Conclusion: DIN 2566 Monel flanges PN 16 from Ladhani Metal Corporation offer outstanding performance in highly corrosive and marine environments. Built from premium Monel alloys like Monel 400 and K500, these flanges provide superior strength, thermal stability, and longevity for critical systems. For technical details, custom sizing, or volume orders, contact Ladhani Metal Corporation today.

Ladhani Metal Corporation is a reputed manufacturer and exporter of DIN 2561 Monel flanges, engineered for durability and corrosion resistance in low-pressure piping systems. Manufactured in accordance with the DIN 2561 standard, these flanges are available in pressure ratings including PN6, PN10, PN16, PN25, and PN40, offering excellent adaptability for custom project requirements. Monel, a high-performance nickel-copper alloy, is known for its exceptional resistance to seawater, acidic environments, and high-temperature oxidation. These properties make Monel flanges a preferred choice for marine, chemical, and oil & gas applications. Flange Types: Weld neck flanges: Designed for high-strength applications and superior leak-proof integrity. Raised face (RF): Enhances gasket compression and improves sealing performance. Flat face (FF): Ideal for connections involving brittle or non-metallic mating surfaces. Grades, Chemical Composition, and Applications: Monel 400 (UNS N04400) Chemical Composition: Nickel (Ni): ≥ 63.0% Copper (Cu): 28.0 – 34.0% Iron (Fe): ≤ 2.5% Manganese (Mn): ≤ 2.0% Silicon (Si): ≤ 0.5% Carbon (C): ≤ 0.30% Applications: Used in marine engineering, chemical processing, hydrocarbon processing, and heat exchangers. Outstanding resistance to seawater, acidic solutions (such as hydrofluoric and sulfuric acids), and high-pressure steam. Monel K500 (UNS N05500) Chemical Composition: Nickel (Ni): ≥ 63.0% Copper (Cu): 27.0 – 33.0% Aluminum (Al): 2.3 – 3.15% Titanium (Ti): 0.35 – 0.85% Iron (Fe): ≤ 2.0% Carbon (C): ≤ 0.25% Applications: Commonly used in oil and gas drilling tools, marine shafts, fasteners, and pumps. Offers higher strength and hardness than Monel 400 while retaining excellent corrosion resistance. Key Features: Complies with DIN 2561 standard specifications. Excellent resistance to corrosion in seawater and acidic environments. High mechanical strength and dimensional stability. Available in custom sizes, face finishes, and drilling options. Supplied with complete material test certificates and quality documentation. Applications: Marine & Shipbuilding: Exceptional resistance to saltwater corrosion makes Monel flanges suitable for seawater piping, condensers, and pump components. Oil & Gas Industry: Ideal for offshore rigs, valves, drilling equipment, and sour gas environments due to their resistance to corrosion and high pressure. Chemical Processing: Used in equipment handling hydrofluoric acid, alkalis, and other corrosive media in chemical plants. Conclusion: DIN 2561 Monel flanges from Ladhani Metal Corporation are engineered to deliver superior corrosion resistance and mechanical strength in aggressive environments. With Monel grades such as 400 and K500, these flanges are trusted by global industries for critical applications where reliability and performance are paramount. Our strict quality control and precision manufacturing ensure flanges that meet the highest standards of durability and safety. For technical details, pricing, or bulk inquiries, contact Ladhani Metal Corporation.

The DIN 2558 Monel Flange PN 6 is a precision-engineered piping component manufactured to meet DIN (Deutsches Institut für Normung) specifications. Made from high-performance Monel alloys—nickel-copper-based materials known for their outstanding resistance to corrosion, particularly in marine and chemical environments—these flanges offer exceptional durability and reliability in some of the most demanding industrial applications. Supplied by Ladhani Metal Corporation, these flanges are designed to provide a leak-free, long-lasting solution in medium-pressure systems. Monel flanges are widely used in industries such as marine engineering, chemical processing, hydrocarbon refining, heat exchangers, and offshore oil and gas production. Types: Weld Neck Flange – Offers a high-strength welded connection ideal for high-pressure and high-temperature systems. Slip-On Flange – Easy to install and align, welded on both sides for secure sealing. Blind Flange – Closes off the end of a pipeline or vessel, ensuring no fluid passes through. Threaded Flange – Allows for non-welded assembly, suitable for low-pressure piping systems. Socket Weld Flange – Designed for small-diameter, high-pressure applications requiring a smooth bore and strong weld. Grades & Chemical Composition: Monel 400 (UNS N04400): Nickel (Ni): ≥ 63.0% Copper (Cu): 28.0 – 34.0% Iron (Fe): ≤ 2.5% Manganese (Mn): ≤ 2.0% Carbon (C): ≤ 0.30% Silicon (Si): ≤ 0.50% Key Features: Excellent resistance to seawater, steam, salt, and caustic solutions; strong mechanical properties across a wide temperature range. Monel K500 (UNS N05500): Nickel (Ni): ≥ 63.0% Copper (Cu): 27.0 – 33.0% Aluminum (Al): 2.3 – 3.15% Titanium (Ti): 0.35 – 0.85% Iron (Fe): ≤ 2.0% Key Features: Combines the corrosion resistance of Monel 400 with higher strength and hardness due to age hardening; excellent resistance to sour gas and seawater environments. PN 6 Rating: The PN 6 rating signifies a nominal pressure class of 6 bar (87 psi), making these flanges ideal for medium-pressure systems where corrosion resistance is paramount, particularly in chloride-rich or alkaline environments. Features: Outstanding Corrosion Resistance: Especially effective in marine, saltwater, and chemical processing environments. High Strength and Toughness: Maintains structural integrity under mechanical stress and thermal fluctuations. Long Service Life: Designed for durability in aggressive media, reducing maintenance and replacement costs. Excellent Weldability: Compatible with standard welding techniques, allowing easy integration into piping systems. Versatile Industrial Use: Suitable for offshore platforms, shipbuilding, desalination, chemical plants, and heat exchangers. Leak-Proof Sealing: Precision manufacturing ensures tight connections that prevent leaks and system inefficiencies. Ladhani Metal Corporation ensures each DIN 2558 Monel Flange is manufactured with stringent quality control and tested for compliance with international standards. These flanges offer a reliable, corrosion-resistant solution for medium-pressure industrial systems operating in highly aggressive environments. #din2558 #din2558flanges #din2558monelflanges #monelflanges #flanges