Name: DIN 2576 Carbon Steel Flanges (PN 10)
Availability: instock

DIN 2576 Carbon Steel Flanges (PN 10)

DIN 2576 Carbon Steel Flanges PN 10 are slip-on type flanges manufactured in accordance with the DIN 2576 standard, suitable for piping systems operating under low to moderate pressures. Made from high-quality carbon steel, these flanges offer good mechanical strength and are cost-effective solutions for a wide range of industrial applications where corrosion resistance is not the primary concern. The slip-on design allows easy fitting over the pipe and facilitates welding on both the inner and outer edges, ensuring reliable and leak-proof connections. Ladhani Metal Corporation is a reputed manufacturer and global supplier of carbon steel flanges, delivering components that comply with international quality and dimensional standards. DIN 2576 carbon steel flanges are widely used in general-purpose piping systems across industries such as oil and gas, power generation, HVAC, water treatment, and process industries. Pressure Rating: • PN 10 (10 bar / 145 psi): Suitable for use in low to medium pressure systems with stable operational demands. Flange Types: • Slip-On Flanges These flanges slide over the pipe end and are welded on both sides, allowing for simple installation and strong mechanical joints. • Flat Face (FF) Flanges Designed to mate with flat gaskets and flat surfaces, suitable for systems involving cast iron or non-metallic components. Carbon Steel Grades and Composition: Common Grades: • ASTM A105 (Forged Carbon Steel) • ASTM A516 Grade 70 (Pressure Vessel Quality Steel) • IS 2062 (Structural Carbon Steel) Typical Composition (ASTM A105): • Carbon (C): 0.35% max • Manganese (Mn): 0.60 – 1.05% • Phosphorus (P): 0.035% max • Sulfur (S): 0.040% max • Silicon (Si): 0.10 – 0.35% Applications: DIN 2576 carbon steel flanges are preferred in systems where high strength is required and the risk of corrosion is minimal or controlled through external protection (e.g., coatings or linings). Common applications include: • Oil and Gas Transmission Used in pipelines and flowlines where moderate pressures are involved. • Power Plants Suitable for steam, water, and air systems in thermal and hydroelectric power stations. • Water Treatment and Distribution Employed in clean water and wastewater systems, including pumping stations and storage tanks. • HVAC Systems Utilized in heating, ventilation, and air conditioning ducting and piping. • Chemical and Petrochemical Applied in non-corrosive fluid handling and auxiliary systems. • Structural and Fabrication Works Used in non-pressure retaining structural supports and frames. Key Features: • Manufactured to DIN 2576 standards • PN 10 pressure rating for medium-duty applications • Cost-effective and mechanically strong • Available in a variety of carbon steel grades • Slip-on design offers ease of installation and alignment • Flat face design compatible with flat gaskets and soft materials • Ideal for industrial sectors with controlled or minimal corrosion environments • Custom drilling, dimensions, and surface treatments available Conclusion: DIN 2576 Carbon Steel Flanges PN 10 by Ladhani Metal Corporation offer a practical and economical solution for low to moderate pressure piping systems. With reliable performance, ease of installation, and availability in various carbon steel grades, these flanges are suited for a broad range of applications in power, water, oil and gas, and infrastructure industries. For detailed specifications, material compatibility, or project-based orders, contact Ladhani Metal Corporation today.

Monel Flanges

DIN 2576 Monel Flanges (PN 10)

DIN 2576 Monel Flanges PN 10 are high-integrity, slip-on flanges manufactured from corrosion-resistant nickel-copper alloys, specifically designed for demanding low to medium-pressure applications. Compliant with the DIN 2576 standard, these flanges provide exceptional resistance to seawater, acids, alkalis, and corrosive chemicals, making them ideal for highly corrosive industrial environments. The slip-on design allows the flange to be positioned over the pipe and welded in place, ensuring precise alignment and long-term mechanical stability. Ladhani Metal Corporation is a trusted manufacturer and international supplier of Monel flanges, producing components that meet rigorous dimensional, metallurgical, and quality standards. DIN 2576 Monel flanges are widely used in marine, chemical, and oil and gas industries, where material durability and corrosion resistance are critical. Pressure Rating: • PN 10 (10 bar / 145 psi): Designed for systems requiring stable operation under moderate pressures in fluid and gas transport environments. Flange Types: • Slip-On Flanges Facilitate easy assembly by slipping over the pipe and welding on both sides to ensure a leak-proof and secure joint. • Flat Face (FF) Flanges Designed for use with flat gaskets and mating surfaces, offering even pressure distribution and sealing performance, particularly with brittle or non-metallic materials. Monel Grades and Composition: Monel 400 (UNS N04400) Composition: • Nickel (Ni): ≥ 63.0% • Copper (Cu): 28.0 – 34.0% • Iron (Fe), Manganese (Mn), Silicon (Si), Carbon (C): Trace amounts Applications: Monel 400 is well-known for its outstanding resistance to seawater, hydrofluoric acid, sulfuric acid, and alkalis. It is widely used in marine engineering, chemical processing, and heat exchangers. Monel K500 (UNS N05500) Composition: • Nickel (Ni): ≥ 63.0% • Copper (Cu): ~30.0% • Aluminum (Al): 2.3 – 3.15% • Titanium (Ti): 0.35 – 0.85% Applications: Monel K500 offers the same corrosion resistance as Monel 400 but with significantly higher strength and hardness due to age-hardening. It is ideal for high-stress applications such as pump shafts, valve components, and marine fasteners. Applications of DIN 2576 Monel Flanges: • Marine and Offshore Engineering Ideal for seawater exposure, ballast systems, and structural applications in shipbuilding and offshore platforms. • Chemical and Petrochemical Processing Used in piping systems exposed to strong acids, caustics, and other corrosive agents. • Oil and Gas Industry Suitable for sour gas (H₂S) environments, offshore drilling equipment, and refining systems. • Heat Exchangers and Condensers Monel's thermal conductivity and corrosion resistance make it suitable for tube sheets and connecting flanges. • Power Generation Applied in cooling systems, boiler feedwater lines, and other aggressive service environments. • Aerospace and Defense Used in fuel and hydraulic systems where resistance to corrosion and stress cracking is required. Key Features: • Manufactured according to DIN 2576 specification • PN 10 pressure rating for low to medium-pressure fluid systems • Exceptional resistance to seawater, acids, alkalis, and chlorides • Available in Monel 400 and Monel K500 grades • Slip-on design enables easy installation and welding • Flat face versions for compatibility with flat gaskets and brittle materials • Excellent mechanical properties and corrosion resistance • Custom dimensions, finishes, and face types available upon request Conclusion: DIN 2576 Monel Flanges PN 10 from Ladhani Metal Corporation deliver high corrosion resistance and mechanical strength for aggressive environments where conventional materials fail. With availability in Monel 400 and K500 grades, these flanges are suitable for marine, oil & gas, and chemical applications. For technical support, project consultation, or custom orders, contact Ladhani Metal Corporation today.

Stainless Steel Flat Flange

DIN 2576 Stainless Steel Flat Flange (PN 10)

DIN 2576 Stainless Steel Flanges PN 10 are high-quality, slip-on flanges manufactured from corrosion-resistant stainless steel, designed for use in low to medium-pressure piping systems. Produced according to the DIN 2576 standard, these flanges offer reliable sealing, ease of installation, and long-term durability in environments involving water, steam, air, oil, and chemical fluids. The slip-on design allows the flange to slide over the pipe and be welded into place, ensuring accurate alignment and structural integrity in a wide range of industrial applications. Ladhani Metal Corporation is a recognized manufacturer and global exporter of stainless steel flanges, delivering products that meet international quality, dimensional, and performance standards. DIN 2576 flanges provide excellent mechanical strength and corrosion resistance, making them ideal for use in chemical plants, water treatment systems, and general process industries. Pressure Rating: • PN 10 (10 bar / 145 psi): Designed for systems operating under low to moderate pressure, offering dependable performance in industrial fluid and gas transport. Flange Types: • Slip-On Flanges Designed to slip over the pipe and be welded on both the inside and outside, these flanges provide easy installation and solid structural support. • Flat Face (FF) Flanges Used with flat gaskets and flat mating surfaces to ensure even gasket compression and proper load distribution, especially when joining with non-metallic components or cast iron. Stainless Steel Grades and Composition: Stainless Steel 304 (UNS S30400) Composition: • Chromium (Cr): 18.0 – 20.0% • Nickel (Ni): 8.0 – 10.5% • Carbon (C): ≤ 0.08% • Manganese (Mn), Silicon (Si), Phosphorus (P), Sulfur (S): Trace amounts • Iron (Fe): Balance Applications: 304 stainless steel offers good corrosion resistance, formability, and weldability, making it suitable for applications in food processing, water piping, and light chemical handling. Stainless Steel 316 (UNS S31600) Composition: • Chromium (Cr): 16.0 – 18.0% • Nickel (Ni): 10.0 – 14.0% • Molybdenum (Mo): 2.0 – 3.0% • Carbon (C): ≤ 0.08% • Iron (Fe): Balance Applications: 316 stainless steel is ideal for more aggressive environments, offering superior resistance to chlorides, acids, and marine exposure. Common applications include chemical plants, pharmaceutical systems, and marine piping. Stainless Steel 321 (UNS S32100) Composition: • Chromium (Cr): 17.0 – 19.0% • Nickel (Ni): 9.0 – 12.0% • Titanium (Ti): ≥ 5x(C) minimum • Carbon (C): ≤ 0.08% • Iron (Fe): Balance Applications: 321 stainless steel is stabilized with titanium to resist intergranular corrosion after welding. It is commonly used in high-temperature applications such as exhaust systems, heat exchangers, furnace parts, and thermal fluid piping in the chemical and petrochemical industries. Applications of DIN 2576 Stainless Steel Flanges: • Chemical and Petrochemical Industries Used in piping systems that handle corrosive chemicals, acids, and solvents, ensuring safe and long-lasting operation. • Water Treatment and Distribution Widely used in pipelines for potable water, wastewater, and desalination plants due to their corrosion resistance and hygienic properties. • Food and Beverage Processing Ideal for sanitary fluid handling systems, where stainless steel ensures contamination-free and easy-to-clean connections. • Marine and Offshore Applications Suitable for piping exposed to seawater and atmospheric corrosion, especially in deck and ballast systems. • General Industrial Use Used in heating systems, compressed air lines, fire protection networks, and process piping. • High-Temperature Services Grade 321 stainless steel is preferred in applications involving thermal cycling and continuous elevated temperatures, such as refinery piping and power plant components. Key Features: • Manufactured according to DIN 2576 standard • PN 10 pressure rating for low to medium-pressure systems • Excellent corrosion resistance and mechanical strength • Available in stainless steel 304, 316, 321, and other grades • Slip-on design ensures easy welding and alignment • Flat face options available for specific gasket and joint requirements • Suitable for chemical, marine, thermal, and general industrial applications • Available in customized sizes, face types, and surface finishes Conclusion: DIN 2576 Stainless Steel Flanges PN 10 from Ladhani Metal Corporation provide reliable, corrosion-resistant performance for a wide range of industrial systems operating under moderate pressure. For technical support, material selection, or custom orders, contact Ladhani Metal Corporation today. 📞 Contact Ladhani Metal Corporation Website: https://www.ladhanimetal.in/ https://www.ladhanimetal.com/ Email: info@ladhanimetals.com Request a Quote: Custom dimensions, materials, and finishes available upon request.

Carbon Steel Flanges

DIN 2573 Carbon Steel Flanges (PN 6)

DIN 2573 Carbon Steel Flanges PN 6 are robust, low-pressure plate flanges manufactured from high-quality carbon steel, specifically developed for general-purpose applications in non-corrosive to mildly corrosive environments. These flanges are designed in accordance with the DIN 2573 standard and are widely used in industrial piping systems where moderate strength and affordability are key requirements. Their simple design and ease of installation make them suitable for low-pressure fluid transfer, air, steam, and water systems across various industries. Ladhani Metal Corporation is a reputable manufacturer and exporter of carbon steel flanges, offering products that adhere to strict international quality and dimensional standards. The DIN 2573 plate flange configuration provides a secure, gasket-sealed connection, ensuring reliable performance even in basic utility and mechanical piping systems. Pressure Rating: • PN 6 (6 bar / 87 psi): Suitable for low-pressure applications involving air, water, oil, and non-aggressive fluids in industrial or mechanical systems. Flange Types: • Plate Flanges Flat flanges designed for easy bolting and gasket sealing, offering a reliable connection in low-pressure systems. • Flat Face (FF) Flanges Ideal for systems using cast iron or non-metallic components, these flanges provide uniform gasket compression and reduce the risk of flange distortion. • Slip-On Flanges These flanges slide over the pipe and are welded on both sides, ensuring secure attachment and proper alignment in basic fluid and gas systems. • Custom-Machined Flanges Available in a variety of sizes and finishes, custom carbon steel flanges can be tailored to meet project-specific requirements. Carbon Steel Grades and Composition: Carbon Steel A105 (Forged) Composition: • Carbon (C): 0.35% max • Manganese (Mn): 0.60 – 1.05% • Phosphorus (P): 0.035% max • Sulfur (S): 0.040% max • Silicon (Si): 0.10 – 0.35% • Iron (Fe): Balance Applications: A105 carbon steel is commonly used for flanges in ambient and elevated temperature service, especially in oil and gas, water transmission, and mechanical systems. Its good machinability and weldability make it a cost-effective choice for general use. Carbon Steel ST37 / S235JR Composition: • Carbon (C): 0.17 – 0.20% • Manganese (Mn): ≤ 1.4% • Phosphorus (P) and Sulfur (S): ≤ 0.045% • Iron (Fe): Balance Applications: Used in structural piping, water distribution, fire protection systems, and low-pressure industrial piping. ST37/S235JR flanges offer reliable performance in applications where corrosion is minimal and pressure requirements are moderate. Applications of DIN 2573 Carbon Steel Flanges: • Water Distribution Systems: Used in water pipelines, treatment plants, and municipal systems where pressure ratings are low and material strength is sufficient. • HVAC and Utility Systems: Ideal for heating, ventilation, and cooling systems that operate under low pressure with non-corrosive fluids. • Oil and Gas (Low Pressure Segments): Applicable in low-pressure oil pipelines, tank farms, and non-critical utility lines. • General Industrial Piping: Widely used in manufacturing facilities for compressed air, inert gas lines, and general fluid handling. • Fire Protection Systems: Carbon steel flanges are commonly used in fire sprinkler systems and standpipe installations. Key Features: • Manufactured according to DIN 2573 specifications • PN 6 pressure rating for low-pressure fluid and utility applications • Excellent strength, machinability, and weldability • Cost-effective solution for non-aggressive environments • Available in A105, ST37, S235JR, and other carbon steel grades • Suitable for mechanical systems, utilities, and water transmission • Custom face finishes, drilling, and dimensions available Conclusion: DIN 2573 Carbon Steel Flanges PN 6 from Ladhani Metal Corporation offer a durable and economical choice for a wide range of low-pressure applications. Combining structural strength with manufacturing precision, these flanges are ideal for utility piping, water distribution, and general industrial use. For detailed technical support, custom dimensions, or pricing inquiries, contact Ladhani Metal Corporation today. 📞 Contact Ladhani Metal Corporation Website: https://www.ladhanimetal.in/ https://www.ladhanimetal.com/ Email: info@ladhanimetals.com Request a Quote: Custom dimensions, materials, and finishes available upon request

Duplex Flanges

DIN 2573 Duplex Flanges (PN 6)

DIN 2573 Duplex Flanges PN 6 are premium-quality, low-pressure plate flanges made from Duplex stainless steels, designed for applications requiring both excellent corrosion resistance and high mechanical strength. Manufactured in compliance with DIN 2573 standards, these flanges provide a reliable, cost-effective solution for demanding industrial environments, especially those exposed to chloride-bearing media, high-pressure fluids, and extreme temperatures. The balanced microstructure of Duplex alloys offers superior resistance to pitting, crevice corrosion, and stress corrosion cracking, making them ideal for use in challenging service conditions. Ladhani Metal Corporation is a reliable manufacturer and global supplier of Duplex steel flanges, offering products that meet stringent quality and international performance standards. The DIN 2573 flange configuration allows for easy assembly and a secure, leak-tight seal, even in low-pressure, corrosive service environments. Pressure Rating: • PN 6 (6 bar / 87 psi): Engineered for low-pressure applications where corrosion resistance, strength, and long-term durability are required in aggressive service conditions. Flange Types: • Plate Flanges Flat, circular flanges designed for bolted piping connections with gaskets, ensuring a leak-free joint suitable for low-pressure systems. • Flat Face (FF) Flanges These flanges offer uniform surface contact, ideal for use with flat gaskets and compatible materials like non-metallic components or cast iron. • Slip-On Flanges Designed to slip over the pipe and be welded into place, these flanges offer easy alignment and simplified installation for low to moderate pressure systems. • Custom-Machined Flanges Custom-fabricated to meet specific application needs, including unique dimensions, face types, and surface finishes, in various Duplex steel grades. Duplex Steel Grades and Composition: Duplex 2205 (UNS S32205 / S31803) Composition: • Chromium (Cr): 21.0 – 23.0% • Nickel (Ni): 4.5 – 6.5% • Molybdenum (Mo): 2.5 – 3.5% • Nitrogen (N): 0.14 – 0.20% • Manganese (Mn), Silicon (Si), Iron (Fe): Balance Applications: Duplex 2205 is ideal for environments with high chloride exposure, offering enhanced strength and corrosion resistance. Commonly used in offshore platforms, heat exchangers, pressure vessels, and seawater piping systems. Applications of DIN 2573 Duplex Flanges: • Chemical and Petrochemical Plants: Used in vessels, tanks, and piping that transport acidic and corrosive chemicals, Duplex flanges provide long service life and resistance to chemical attack. • Marine and Offshore Engineering: Ideal for seawater systems and subsea equipment due to their high corrosion resistance and excellent strength under pressure. • Oil and Gas Industry: Used in flowlines, risers, and subsea systems, these flanges offer mechanical durability and protection against corrosion in harsh hydrocarbon environments. • Power Generation: Duplex flanges are used in heat exchangers, condensers, and high-pressure steam lines, delivering stability under fluctuating temperature and pressure conditions. • Water Treatment and Desalination: Well-suited for brine handling and reverse osmosis systems, thanks to superior resistance to chloride-induced stress corrosion. Key Features: • Manufactured in accordance with DIN 2573 standard • Rated PN 6 for low-pressure systems requiring corrosion resistance • Exceptional performance in environments with chlorides and high mechanical stress • Available in Duplex 2205, Super Duplex 2507, and other Duplex grades • High strength combined with cost efficiency • Excellent fatigue resistance and weldability • Customization available for surface finishes, flange faces, and drilling patterns Conclusion: DIN 2573 Duplex Flanges PN 6 by Ladhani Metal Corporation offer a robust, corrosion-resistant solution for industries operating in aggressive chemical, marine, and high-pressure environments. Combining the mechanical strength of Duplex stainless steels with the reliable DIN 2573 design, these flanges ensure secure, long-lasting connections in critical systems. For detailed specifications, special dimensions, or technical consultations, contact Ladhani Metal Corporation today.

Monel Flanges

DIN 2573 Monel Flanges (PN 6)

DIN 2573 Monel Flanges PN 6 are premium-quality, low-pressure plate flanges crafted from Monel alloys, specifically engineered for systems that operate in highly corrosive and aggressive environments. Manufactured in accordance with DIN 2573 standards, these flanges offer excellent resistance to seawater, acids, and high-temperature conditions, making them an ideal choice for industries such as marine engineering, chemical processing, oil and gas, and power generation. The exceptional properties of Monel alloys ensure durability and reliability in applications requiring strong resistance to pitting, crevice corrosion, and stress corrosion cracking. Ladhani Metal Corporation is a trusted manufacturer and global supplier of Monel alloy flanges, delivering high-quality products that meet rigorous international standards. The DIN 2573 flange design ensures easy installation and provides a secure, leak-free connection, even in low-pressure, harsh environments. Pressure Rating: • PN 6 (6 bar / 87 psi): Designed for low-pressure applications in corrosive and high-temperature environments where Monel’s strength and resistance to corrosion are critical for long-term performance. Flange Types: • Plate Flanges Flat flanges ideal for bolted connections in piping systems where gasket sealing is required, providing secure, leak-free operation in low-pressure systems. • Flat Face (FF) Flanges Used with flat gaskets and mating surfaces, ensuring uniform contact and load distribution, particularly when joining with non-metallic components or cast iron systems. • Slip-On Flanges These flanges slip over the pipe, providing easy alignment and easy-to-weld connections, ideal for low-pressure applications with moderate pressure fluctuations. • Custom-Machined Flanges Tailored to meet specific dimensional and material requirements, available in various sizes, grades, and face finishes to suit the needs of custom applications. Monel Grades and Composition: Monel 400 (UNS N04400) Composition: • Nickel (Ni): 63.0 – 70.0% • Copper (Cu): 28.0 – 34.0% • Iron (Fe): ≤ 2.5% • Manganese (Mn), Silicon (Si), Carbon (C): Trace amounts Applications: Monel 400 is widely used in marine environments, chemical processing, and heat exchangers, where it is subjected to both high temperatures and exposure to saltwater or acids. Its superior resistance to corrosion and oxidation makes it a preferred material in demanding applications like pumps, valves, and marine piping systems. Monel K-500 (UNS N05500) Composition: • Nickel (Ni): 63.0 – 70.0% • Copper (Cu): 27.0 – 33.0% • Aluminum (Al): 2.3 – 3.2% • Titanium (Ti): 0.35 – 0.85% • Iron (Fe): ≤ 2.5% Applications: Monel K-500 offers higher strength and hardness compared to Monel 400, making it suitable for applications in oil and gas extraction, marine industries, and aerospace systems, where both corrosion resistance and high mechanical properties are required. Applications of DIN 2573 Monel Flanges: • Chemical and Petrochemical Plants: Monel flanges are ideal for use in chemical reactors, exchangers, and pipelines handling aggressive chemicals like sulfuric acid, hydrochloric acid, and caustics. • Marine and Offshore Engineering: Highly resistant to seawater corrosion, Monel flanges are used extensively in marine piping systems, offshore oil rigs, and shipbuilding applications where exposure to saltwater and harsh weather conditions is frequent. • Oil and Gas Industry: Monel flanges are often used in production platforms, refineries, and pipelines exposed to brine and acidic substances, offering both strength and resistance to corrosion under high-stress conditions. • Power Generation: Used in systems handling high-temperature steam and corrosive environments, Monel flanges provide reliable service for high-performance power plant components. • Desalination and Water Treatment: With their corrosion resistance to saline environments, Monel flanges are also ideal for seawater desalination plants and water treatment facilities. Key Features: • Manufactured according to DIN 2573 standards • Rated for PN 6 low-pressure systems, with exceptional resistance to corrosion • Outstanding performance in highly corrosive, high-temperature environments • Available in Monel 400, Monel K-500, and other Monel alloys • High strength-to-weight ratio for reliable long-term performance • Suitable for marine, offshore, chemical, and power generation applications • Available with custom drilling, surface finishes, and flange faces Conclusion: DIN 2573 Monel Flanges PN 6 from Ladhani Metal Corporation provide unmatched durability, corrosion resistance, and performance in low-pressure applications exposed to challenging chemical, thermal, and environmental conditions. For custom dimensions, material selections, or technical support, contact Ladhani Metal Corporation today.

Titanium Flat Flange

DIN 2573 Titanium Flat Flange

DIN 2573 Titanium Flanges PN 6 are lightweight, corrosion-resistant plate flanges manufactured to DIN 2573 standards, specifically designed for low-pressure industrial and chemical applications. Fabricated from premium-grade titanium, these flanges are known for their exceptional strength-to-weight ratio, biocompatibility, and superior corrosion resistance, especially in aggressive environments involving chlorides, seawater, and oxidizing agents. DIN 2573 titanium flanges are ideal for critical applications across industries such as chemical processing, desalination, offshore engineering, medical systems, and aerospace. Ladhani Metal Corporation is a trusted supplier and exporter of precision-engineered titanium flanges, delivering products that meet stringent global quality standards. The DIN 2573 design, combined with the inherent material advantages of titanium, ensures long-lasting performance and ease of integration in low-pressure piping systems. Pressure Rating: • PN 6 (6 bar / 87 psi): Suitable for low-pressure pipelines and systems where outstanding corrosion resistance and long service life are essential, even under chemically aggressive or saline conditions. Flange Types: • Plate Flanges Standard flat flanges designed for bolted connections with gasket sealing, suitable for low-pressure service. • Flat Face (FF) Flanges Ensures full contact with mating flanges or non-metallic components to prevent stress cracking or uneven loading. • Slip-On Flanges Allow for easy alignment and welding, widely used in systems where frequent maintenance or disassembly is required. • Custom-Machined Flanges Available in custom sizes, dimensions, and titanium grades to suit specific project or industry needs. Titanium Grades and Composition: 1. Grade 2 (Commercially Pure Titanium) Composition: • Titanium (Ti): ≥ 99.2% • Iron (Fe): ≤ 0.30% • Oxygen (O): ≤ 0.25% • Carbon (C): ≤ 0.08% • Nitrogen (N): ≤ 0.03% • Hydrogen (H): ≤ 0.015% Applications: Used in desalination plants, chemical handling, marine equipment, and medical fluid systems due to its excellent formability, corrosion resistance, and biocompatibility. 2. Grade 5 (Ti-6Al-4V – Titanium Alloy) Composition: • Titanium (Ti): Balance • Aluminum (Al): 5.5 – 6.75% • Vanadium (V): 3.5 – 4.5% • Iron (Fe): ≤ 0.40% • Oxygen (O): ≤ 0.20% Applications: Preferred in aerospace, high-performance marine, and industrial applications requiring superior mechanical strength, wear resistance, and corrosion protection. Applications of DIN 2573 Titanium Flanges: • Chemical and Petrochemical Plants: Ideal for conveying aggressive acids, chlorides, and alkalis in low-pressure systems. • Desalination and Marine Systems: Exceptional resistance to seawater corrosion makes them suitable for brine, saltwater, and offshore structures. • Medical and Pharmaceutical Equipment: Non-toxic and biocompatible properties support sterile piping systems for fluids and gases. • Aerospace and Defense: Lightweight and high-strength material enhances performance in low-pressure structural and fuel systems. Key Features: • Manufactured according to DIN 2573 specifications • Designed for PN 6 low-pressure applications • Superior corrosion resistance in marine and chemical environments • Lightweight with high structural strength • Suitable for welding, pickling, passivation, and surface customization • Available in Grade 2, Grade 5, and other titanium alloys Conclusion: DIN 2573 Titanium Flanges PN 6 by Ladhani Metal Corporation offer a high-performance, corrosion-resistant solution for low-pressure systems exposed to harsh environments. With excellent mechanical properties and unmatched longevity, these titanium flanges serve critical roles in chemical, marine, medical, and water treatment industries. For detailed specifications, custom sizes, or material selection assistance, contact Ladhani Metal Corporation.

Duplex Steel Flanges

DIN 2568 Duplex Steel Flanges (PN 64)

DIN 2568 Duplex Steel Flanges PN 64 are high-performance threaded flanges manufactured from premium duplex stainless steel, engineered to provide superior strength and corrosion resistance in demanding high-pressure environments. Designed in accordance with DIN 2568 standards, these flanges combine the benefits of both austenitic and ferritic stainless steels, delivering excellent mechanical properties, exceptional resistance to stress corrosion cracking, and outstanding durability in aggressive media. Ladhani Metal Corporation is a leading manufacturer and exporter of duplex flanges, supplying components that meet stringent international quality and dimensional standards. The threaded design offers efficient, weld-free assembly and disassembly, making these flanges ideal for systems that require easy maintenance access in chemically harsh or offshore environments. Pressure Rating: • PN 64 (64 bar / 928 psi): Specially designed for use in high-pressure applications involving corrosive media, temperature fluctuations, and mechanical stress. Flange Types: • Threaded (Screwed) Flanges Enable quick connection and removal, suitable for pipelines and assemblies requiring periodic inspection or replacement. • Raised Face (RF) Flanges Enhance sealing performance in high-pressure environments by focusing gasket compression. • Flat Face (FF) Flanges Used in conjunction with flat-faced valves or equipment, especially where gasket alignment and load distribution are crucial. • Forged Threaded Flanges Deliver high strength, superior pressure resistance, and dimensional precision. • Custom-Machined Flanges Offered in a wide variety of sizes, face types, and duplex steel grades to meet specific project requirements. Available Duplex Grades and Composition: 1. Standard Duplex Stainless Steel Composition: • Chromium (Cr): 21.0 – 23.0% • Nickel (Ni): 4.5 – 6.5% • Molybdenum (Mo): 2.5 – 3.5% • Nitrogen (N): 0.08 – 0.20% • Carbon (C): ≤ 0.030% Applications: Commonly used in chemical processing, marine systems, and power generation due to its excellent resistance to pitting, crevice corrosion, and chloride-induced stress corrosion cracking. Applications of DIN 2568 Duplex Flanges: • Offshore and Marine Engineering: Used in subsea equipment, pipelines, and ballast systems exposed to chloride-rich environments. • Chemical Processing Plants: Withstands corrosive acids, alkalis, and solvents commonly encountered in aggressive chemical processes. • Desalination and Water Treatment: Used in high-salinity applications, such as RO systems and brine discharge lines. • Pulp and Paper Industry: Resists acidic liquors and bleach chemicals in harsh production environments. • Oil and Gas Industry: Employed in pipelines, separators, and injection systems operating under high pressure and exposure to sour service. Key Features: • Designed to DIN 2568 standards • Rated for PN 64 high-pressure service • Combines high mechanical strength and corrosion resistance • Threaded design supports easy, non-welded installation and maintenance • Excellent resistance to pitting, crevice corrosion, and chloride stress cracking • Supplied with full material traceability, test certificates, and quality documentation • Available with custom coatings, surface finishes, and machining options Conclusion: DIN 2568 Duplex Steel Flanges PN 64 from Ladhani Metal Corporation offer a robust and reliable solution for high-pressure, corrosive, and mechanically demanding systems. Their dual-phase microstructure ensures superior performance across a wide range of industrial applications. For custom dimensions, material consultations, or technical assistance, contact Ladhani Metal Corporation today.

STAINLESS STEEL SHEET/ PLATE/ COIL

BS S524 STAINLESS STEEL PLATE

ladhani metal corporation is supplier and exporter of BS S524 sheet , plate , coil , flat bar , circular plate , plate flanges , farma , laser cutting design sheet , waterjet cutting design sheet.BS S524 is the basic austenitic 18/8 steel stabilised by Titanium or additions. These grades are used because they are not sensitive to intergranular corrosion after heating within the carbide precipitation range of 425-850°C.BS S524 is the grade of choice for applications in the temperature range of up to about 900°C, combining high strength, resistance to scaling and phase stability with resistance to subsequent aqueous corrosion. Cold Bending : It has excellent cold working properties and cold bending can generally be carried out without too much difficulty. Hot Bending : Hot bending should be performed at 950oC - 1100Oc. Corrosion Resistance : it similar resistance to general corrosion in most media as 304, but not as good as 316. Stress Corrosion Cracking : it has similar resistance to stress corrosion cracking as 304, but not as good as 316. Pitting Corrosion / Crevice Corrosion : It has similar resistance to pitting and crevice corrosion as 304, but not as good as 316. Intergranular Corrosion : it has better resistance to intergranular corrosion than most of the standard 300 grades other than the low carbon types 304L, 316L and 317L due to its titanium content.N.B. Forging : Heat uniformly to 1150oC - 1200oC Machining: It is more difficult to machine than most of the standard austenitic stainless steels, due to its titanium addition. Our Domestic reach is unlimited and we supply to this following cities Ahmedabad, Amritsar, Aurangabad, Bangalore, Bhopal, Chandigarh, Chennai, Coimbatore, Dhanbad, Faridabad, Ghaziabad, Guwahati, Gwalior, Howrah, Hyderabad, Indore, Jabalpur, Jaipur, Jodhpur, Kanpur, Kolkata, Kota, Lucknow, Ludhiana, Madurai, Meerut, Mumbai, Nagpur, Nashik, Navi Mumbai, New Delhi, Patna, Pune, Raipur, Rajkot, Ranchi, Solapur, Srinagar, Surat, Thane, Vadodara, Varanasi, Vijayawada, Visakhapatnam, Hubballi, Tiruchirappalli, Bareilly, Moradabad, Mysore, Gurgaon, Aligarh, Jalandhar, Bhubaneswar We export to following Countries: Russia, Canada, United States, China, Brazil, Australia, Argentina, Kazakhstan, Algeria, Denmark, Saudi Arabia, Mexico, Indonesia, Iran, Mongolia, Peru, South Africa, Colombia, Ethiopia, Bolivia, Egypt, Venezuela, Turkey, Chile, Myanmar, France, Ukraine, Madagascar, Botswana, Kenya, Thailand, Spain, Sweden, Uzbekistan, Morocco, Paraguay, Zimbabwe, Norway, Japan, Germany, Republic of the Congo, Finland, Vietnam, Malaysia, Poland, Oman, Italy, Philippines, Ecuador, New Zealand, United Kingdom, Guinea, Uganda, Nepal, Bangladesh.