'remarkable corrosion resistance'

Ladhani Metal Corporation offers Anti-Corrosion Half Round Tube Shields designed to protect boiler tubes, economizers, superheaters, reheaters, and heat recovery systems from chemical attack, scaling, and oxidation in high-temperature and corrosive environments. These semi-cylindrical shields act as a sacrificial barrier, covering exposed tube surfaces and preventing premature wear caused by flue gas corrosion, ash deposits, and aggressive operating atmospheres. By reducing corrosion-related damage, Anti-Corrosion Half Round Tube Shields extend tube service life, lower maintenance costs, and improve overall boiler efficiency. Function of Anti-Corrosion Half Round Tube Shields • Provide a protective covering against corrosion, oxidation, and scaling • Reduce surface degradation in corrosive gas and ash-laden environments • Extend operational life of tubes under high-temperature service • Minimize shutdowns and replacement costs in boilers and heaters Ladhani Metal Corporation manufactures, supplies, and exports Anti-Corrosion Half Round Tube Shields in a wide range of stainless steels and heat-resistant alloys for domestic and international power and process industries. Available Grades • SS 304 / SS 304L • SS 310 / SS 310S • SS 316 / SS 316L • SS 410 / SS 420 / SS 430 • 1Cr13 • 1Cr18Ni9Ti • 1Cr20Ni14Si2 • 1Cr25Ni20Si2 • Cr23Ni13 • Cr25Ni20 Applications: Widely used in power plants, WHRBs, HRSGs, refinery heaters, petrochemical furnaces, and industrial steam boilers operating in corrosive and high-temperature zones. Uses • Shields boiler tubes against flue gas corrosion and scaling • Protects reheater and superheater sections from oxidation • Extends tube life in economizers and waste heat recovery boilers • Reduces maintenance downtime in petrochemical and refinery heaters Features • Excellent resistance to corrosion and oxidation at elevated temperatures • Strong mechanical performance under cyclic heating conditions • Custom-engineered for precise fit over tube curvature • Easy to install, remove, and replace during boiler overhauls Applications • Thermal power stations – Corrosion protection for superheater and reheater tubes • Waste heat recovery systems – Guards economizer tubes from corrosive flue gases • HRSGs – Reliable under varying operating cycles • Petrochemical and refinery heaters – Durable in aggressive atmospheres Conclusion Anti-Corrosion Half Round Tube Shields by Ladhani Metal Corporation provide long-lasting protection against corrosion, scaling, and oxidation in critical boiler and heater applications. Available in stainless steels and special alloys, these shields are engineered for superior durability, extended service life, and export-quality performance across global power and process industries. #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Muzaffarpur#halftubeshield #utypehalftubeshield #tubeshieldexporter #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier #SSShielding #IndustrialTubeShield #BoilerTubeGuard #CustomMetalParts #SteelIndustryIndia #MetalEngineering #HeavyIndustrySupply #StainlessSteelIndia #SteelExporters #MetalComponentExport #FabricatedProducts #SteelDealer #IndustrialSupplyIndia #BoilerTubeFittings #TubeShieldingSolutions #HalfTubeCover #HeatExchangerShield #HalfRoundReheaterShield #ReheaterTubeShield #BoilerReheaterProtection #PowerPlantTubeShield #BoilerErosionShield #SteamBoilerTubeShield #HighTempTubeShield #BoilerWearProtection

DIN 2545 Inconel flanges are engineered for superior strength, excellent resistance to high temperatures, and remarkable corrosion resistance in extreme environments. Ladhani Metal Corporation provides these high-quality flanges made from Inconel alloys, known for their ability to endure elevated temperatures, oxidation, and corrosive conditions. These flanges are ideal for industries where performance under high-temperature stress and resistance to harsh environments are essential, such as aerospace, chemical processing, power generation, and marine. Types of DIN 2545 Inconel Flanges: Flat Face Flanges (FF) – These flanges have a flat surface that facilitates uniform distribution of the sealing force, making them ideal for low-pressure systems or when a secure seal is required. Raised Face Flanges (RF) – Raised face flanges feature a raised area around the bolt holes, providing enhanced sealing pressure, making them suitable for high-pressure environments. Ring-Type Joint (RTJ) Flanges – Designed with a groove for a metal sealing ring, these flanges are ideal for applications requiring resistance to high pressure and high temperatures. Grades and Chemical Composition: Inconel 600 (UNS N06600) Chemical Composition: Ni: 72%, Cr: 14-17%, Fe: balance, Mn: 1%, Si: 0.5%, C: 0.15% Inconel 600 is known for its excellent resistance to oxidation and corrosion at elevated temperatures. It is widely used in applications like furnace components, chemical processing, and nuclear reactors, offering high strength and good workability. Inconel 625 (UNS N06625) Chemical Composition: Ni: 58%, Cr: 20-23%, Mo: 8-10%, Fe: 5%, Nb: 3.15-4.15%, Ti: 0.4-1% Inconel 625 is a nickel-based alloy that offers superior resistance to high-temperature oxidation and corrosion. It provides exceptional resistance to pitting and crevice corrosion, making it ideal for applications in aerospace, marine, and chemical industries, where high temperatures and corrosive environments are common. Inconel 718 (UNS N07718) Chemical Composition: Ni: 50-55%, Cr: 17-21%, Fe: 0-5%, Mo: 2.8-3.3%, Nb+Ta: 4.75-5.5%, Ti: 0.65-1.15%, Al: 0.2-0.8% Inconel 718 is a high-strength, corrosion-resistant alloy widely used in high-temperature applications. It is designed for use in extreme conditions, offering excellent resistance to oxidation, sulfidation, and high-temperature environments. PN 40 Pressure Rating: The "PN" rating indicates the flange's pressure capacity. PN 40 refers to flanges that are designed to withstand pressures up to 40 bar, making them suitable for high-pressure systems where secure, leak-free connections are essential. Applications: Aerospace Industry: Jet Engines and Turbomachinery: Inconel flanges are commonly used in aerospace applications, including jet engines and turbine systems, where components are exposed to extremely high temperatures and pressures. They provide excellent resistance to heat and corrosion in high-stress environments. Exhaust Systems: Inconel's ability to withstand high temperatures makes it ideal for use in exhaust systems of aircraft engines. 2. Power Generation Industry: Gas Turbines: Inconel flanges are used in gas turbines in power plants, particularly in components that operate at high temperatures, such as turbine blades, combustors, and other critical parts. Nuclear Power Plants: Inconel is used in the construction of components for nuclear reactors, where heat and radiation resistance are crucial. It is used in piping, valves, and other systems exposed to high-temperature nuclear environments. 3. Chemical Processing and Petrochemical Industries: High-Temperature Reactors: Inconel flanges are used in reactors, heat exchangers, and other equipment in the chemical industry that handle aggressive, high-temperature chemical reactions, including those with sulfuric acid, chlorine, and other corrosive substances. Petrochemical Refineries: Inconel is used in systems where high temperatures and reactive chemicals are present, offering superior performance in handling corrosive materials such as acids and hydrocarbons. 4. Oil and Gas Industry: Offshore Platforms: Inconel flanges are widely used in offshore oil and gas platforms, particularly in subsea pipelines, risers, and pressure vessels, where high resistance to both high pressure and corrosion (especially from seawater) is necessary. Wellhead Equipment: Inconel flanges are also used in downhole equipment and wellhead connections that need to resist high-pressure environments and exposure to extreme temperatures. Ladhani Metal Corporation ensures that each Inconel flange is produced to the highest standards of quality and precision, adhering to international specifications. Every flange undergoes thorough testing to meet the required durability and performance standards, providing reliable solutions for critical applications in the most challenging environments. #din2545 #din2545flanges #din2545inconelflanges #flanges #flangessupplier

DIN 2545 Super Duplex flanges are specifically designed to offer outstanding strength and resistance to corrosion, especially in highly aggressive environments. Ladhani Metal Corporation supplies these high-performance flanges made from super duplex stainless steel, combining the advantages of both austenitic and ferritic structures to achieve superior mechanical properties and exceptional resistance to pitting, crevice corrosion, and stress corrosion cracking. With a pressure rating of PN 40, these flanges can withstand pressures up to 40 bar, ensuring reliable and safe performance in demanding applications such as offshore oil and gas, chemical processing, and marine industries. Types of DIN 2545 Super Duplex Flanges: Flat Face Flanges (FF) – These flanges have a flat sealing surface, suitable for low-pressure systems where uniform distribution of sealing force is needed. Raised Face Flanges (RF) – These flanges feature a raised area around the bolt holes, providing higher sealing pressure and better performance in higher-pressure environments. Ring-Type Joint (RTJ) Flanges – Designed with a groove to accommodate a metal sealing ring, these flanges are ideal for use in high-pressure and high-temperature systems. Grades and Chemical Composition: Super Duplex 2507 (UNS S32750) Chemical Composition: Chromium (Cr): 25% Nickel (Ni): 7% Molybdenum (Mo): 4% Nitrogen (N): 0.27% Iron (Fe): Balance This composition provides a remarkable combination of properties: Corrosion Resistance: Excellent protection against pitting, crevice corrosion, and stress corrosion cracking, even in environments containing chlorides or other aggressive chemicals. High Strength: The high molybdenum and nitrogen content enhance both the strength and corrosion resistance of the material, making it ideal for applications in highly corrosive, high-pressure environments. Ductility and Toughness: Despite its high strength, Super Duplex 2507 maintains good ductility, which is crucial Super Duplex 2507 is a high-alloy material known for its exceptional resistance to chloride stress corrosion cracking, pitting, and crevice corrosion. It is used in the most demanding applications, including offshore and subsea oil and gas, where high pressures and harsh environments are common. The enhanced molybdenum and nitrogen content provide superior mechanical strength and corrosion resistance. PN 40 Pressure Rating: The "PN" rating indicates the flange's pressure capacity. With PN 40, the flange is rated to handle pressures up to 40 bar, making it suitable for high-pressure applications where reliability and leak-free connections are essential. Applications: DIN 2545 Super Duplex flanges with PN 40 are widely used in industries that require superior performance under extreme conditions. Common applications include: Oil and Gas Industry: Offshore Platforms and Subsea Pipelines: Super duplex flanges are commonly used in offshore oil and gas platforms where exposure to seawater and harsh conditions requires materials with superior resistance to corrosion. Downhole Equipment: These flanges are ideal for equipment used in oil extraction, such as wellhead connections, blowout preventers, and pipeline systems under high pressure. Chemical and Petrochemical Industry: High-Pressure Reactors and Heat Exchangers: Super duplex flanges are essential in systems handling aggressive chemicals, such as acids, alkalis, and chloride-containing compounds, where both high strength and corrosion resistance are critical. Pipelines for Petrochemical Transport: Used in the transportation of petrochemicals and refined products, offering durability against corrosive chemicals and high temperatures. Marine and Offshore Applications: Seawater Cooling Systems: The excellent corrosion resistance of super duplex steel makes these flanges ideal for marine cooling systems, including seawater pumps and piping systems on ships and offshore platforms. Desalination Plants: Super duplex flanges are used in seawater desalination systems, where they help resist the corrosive effects of saltwater. Power Generation Industry: Nuclear and Fossil Fuel Plants: Super duplex flanges are employed in high-pressure steam lines, cooling systems, and heat exchangers where both strength and resistance to corrosion and erosion are necessary. Geothermal Energy Systems: Used in geothermal plants where high-temperature, aggressive fluids may cause corrosion, super duplex flanges ensure long-lasting performance. Conclusion: Ladhani Metal Corporation ensures that each Super Duplex flange meets stringent quality standards and is manufactured to exact specifications, ensuring durability and long-lasting performance in the most challenging environments. #din2545 #din2545flanges #din2545superduplexflanges #flanges

Porduct name : Titanium Explosive Clad Steel Plate / Sheet Material: Gr2 Titanium +steel,Gr2 Titanium+stainless steel etc. Size &Standard: As per client drawing Production Method: Forging,annealing and machining Advantage: Excellent corrosion resistance ability Packing: Plywood case Application: Heat Exchanger, chemical equipment, Pressure Vessel, filter devices, etc. Titanium Explosive Clad Steel Plate / Sheet Tube plate in different working environment have different application material, general tube plate use Q345R container board, this is, of course, in the absence of corrosive medium under the condition of flow and pressure, and in some high pressure high temperature corrosion environment we will recommend that users use stainless steel when tubesheet machining, 16 mn or titanium alloy wear resistant material. EXPLOSIVE CLAD PLATES : Description Clad material Base Material Size(mm) Standard Application Titanium Steel clad plate GR1, GR2, GR3 (CP Ti) GR7, GR16 (Ti/Pd alloy) GR12 (Ti-0.3 Mo-0.8 Ni) 516GR-70 A216 A210-C (1-10/5-120)thk ×(≤2000)width ×(≤8000)length ASTMB-898 Petrochemical, chemical, chloral-alkali, food, fertilizer, wet metallurgy, Electroplating, Vacuum Salting Making Titanium Stainless steel clad plate GR1, GR2, GR3 (CP Ti) GR7, GR16 (Ti/Pd alloy) GR12 (Ti-0.3 Mo-0.8 Ni) SUS410 SUS304 (1-6/5120)thk ×(≤2000)width ×(≤8000)length ASTMB-898 Petrochemical, chloral-alkali, aerospace, aviation, low temperature, food, light industry, medicine Titanium Aluminum clad material GR1, GR2, GR3 (CP Ti) GR7, GR16 (Ti/Pd alloy) GR12 (Ti-0.3 Mo-0.8 Ni) L, Ly, LF (1-10/5-50)thk ×(≤2000)width ×(≤8000)length ASTMB-898 aerospace, cookware, chemical, industry, ship, special brazing filler Titanium Copper clad plate GR1, GR2, GR3 (CP Ti) GR7, GR16 (Ti/Pd alloy) GR12 (Ti-0.3 Mo-0.8 Ni) T1, T2, T3, T4 (1-10/5-50)thk ×(≤2000)width ×(≤8000)length ASTMB-432 Power plant, electrolysis, cook ware, wet metallurgy Titanium Nickel clad material GR1, GR2, GR3 (CP Ti) GR7, GR16 (Ti/Pd alloy) GR12 (Ti-0.3 Mo-0.8 Ni) N2, N4, N6 (1-10/5-50)thk ×(≤2000)width ×(≤8000)length Reference to ASTMB-898 Metallurgy Fe max O max N max C max H max Pd Al V Mo Ni Elong'n Rp 0.2 Rm No wt% wt% wt% wt% wt% wt% wt% wt% wt% wt% % MPa MPa Grade 1 0.2 0.18 0.03 0.1 0.015 24 170-310 240 Grade 2 0.3 0.25 0.03 0.1 0.015 20 275-450 345-480 Grade 3 0.25 0.3 0.05 0.1 0.015 18 360-480 480-700 Grade 4 0.5 0.4 0.05 0.1 0.015 15 500-530 600-680 Grade 5 0.4 0.2 0.05 0.1 0.015 5.5-6.7 10 800-1100 890-1400 Grade 6 0.1 16 780-820 820-860 Grade 7 0.3 0.25 0.03 0.1 0.015 0,12-0,25 20 275-450** 345 Grade 9 0.25 0.15 0.02 0.05 0.015 2,5-3,05 15 550 650 Grade 11 0.2 0.18 0.03 0.1 0.015 0.12-0.25 24 170-310** 240 Grade 12 0.3 0.25 0.03 0.1 0.015 0.3 0.8 25 414-460 499-600

Porduct name : Titanium clad stainless steel tube sheet Material: Titanium +steel,Titanium+stainless steel etc. Size &Standard: As per client drawing Production Method: Forging,annealing and machining Advantage: Excellent corrosion resistance ability Packing: Plywood case Application: Heat Exchanger, chemical equipment, Pressure Vessel, filter devices, etc. Titanium clad stainless steel tube sheet Titanium composite steel plate tube-sheet is a single or double-sided composite plate made of ordinary grade TA1 or TA2 (composite metal) and carbon steel or alloy steel by explosion, explosion + rolling or hot rolling. Titanium metal has excellent corrosion resistance, widely used in flue gas desulfurization equipment, power plant chimneys, chemical reactors, heat exchangers, pressure vessels, etc. But its disadvantage is high cost, titanium composite steel plate tubesheet has the corrosion resistance of titanium metal and the structural strength of steel, can greatly reduce the project cost. At present, the production method of titanium composite steel tubesheet is as follows: 1. Weld compound 2. Rolling compound 3. Explosive welding 4. Explosive welding + rolling Baoji Lihua uses explosive welding and rolling and combines the two processes. This method can overcome the disadvantages of small area and complex rolling process of explosive composite plate, give full play to their respective advantages, and produce titanium steel composite plate with large area and small thickness. It is more efficient and cheaper. Technological parameters and shear strength of explosive welding of Titanium clad stainless steel plate tube sheet 1 Cladding materials Base materials h0/ mm Wg/ (g.cm-2) Bond strength/MPa 1 2 3 4 Average Remark Metal δ1/ mm Metal δ2/ mm Titanium 3 5 Stainless steel 18 5 6.5 1.4 1.6 σt 293 200 392 179 266 The substrate is generally polished. σf 247 208 113 92 165 σt 447 530 460 441 444 The substrate is polished. σf 403 200 363 322 σt 139 105 203 205 163 The substrate is generally polished. σf 231 345 286 287 285 σt 407 410 263 407 372 The substrate is polished. σf 498 571 513 527 Losive welding of Titanium clad stainless steel plate tube sheet 2 Cladding materials Base materials h0/ mm Wg/ (g.cm-2) Bond strength/MPa 1 2 3 4 Average Remark Metal δ1/ mm Metal δ2/ mm Titanium 3 5 Stainless steel 18 5 6.5 1.4 1.6 σt 392 87 240 18 The substrate is generally polished. σf 345 92 157 12 σt 530 279 402 5 The substrate is polished. σf 403 200 321 3 σt 339 60 230 18 The substrate is generally polished. σf 287 149 233 11 σt 571 513 541 2 The substrate is polished.

Ladhani Metal Corporation, a manufacturer, supplier, and exporter, offers stainless steel sheets, plates, and coils in grade X10Cr17Mn6Ni4N2O as per IS 6911 specifications. X10Cr17Mn6Ni4N2O is an austenitic stainless steel grade stabilized with nitrogen, manganese, and nickel, designed to deliver excellent corrosion resistance, high strength, and superior toughness. This grade is widely preferred in critical industries for its resistance to pitting, stress corrosion cracking, and oxidation. Chemical Composition of X10Cr17Mn6Ni4N2O (as per IS 6911) • Carbon (C): 0.10% max • Manganese (Mn): 5.5% – 7.5% • Silicon (Si): 1.0% max • Phosphorus (P): 0.040% max • Sulphur (S): 0.030% max • Chromium (Cr): 16.5% – 18.5% • Nickel (Ni): 3.5% – 5.5% • Nitrogen (N): 0.15% – 0.30% Functions and Characteristics • Provides excellent corrosion resistance in chloride-bearing and aggressive environments • Nitrogen improves strength, toughness, and resistance to localized corrosion • Manganese enhances mechanical strength and stabilizes the austenitic structure • Offers good resistance to stress corrosion cracking and intergranular corrosion • Non-magnetic in the annealed condition with superior weldability and formability Applications • Power Generation – Heat exchangers, condensers, and boiler parts • Oil and Gas – Offshore platforms, subsea equipment, and pipelines • Petrochemical Industry – Reactors, chemical processing units, and refineries • Fertilizer Plants – Equipment exposed to corrosive fertilizers and chemical solutions • Chemical Industry – Process vessels, storage tanks, and high-strength piping systems • Marine Engineering – Ship components, seawater systems, and offshore structures • Automotive Industry – Exhaust systems, catalytic converter parts, and structural components • Food Processing – Hygienic equipment, storage tanks, and machinery • Construction – Architectural cladding, structural elements, and heavy-duty fasteners • General Engineering – Shafts, fasteners, machine parts, and components exposed to corrosive media Available Forms • Stainless steel sheets • Stainless steel plates • Stainless steel coils Grades Available under IS 6911 Apart from X10Cr17Mn6Ni4N2O, IS 6911 also covers a wide range of stainless steel grades, including X04Cr12, X07Cr17, X12Cr12, X20Cr13, X30Cr13, X40Cr13, X15Cr16Ni2, X108Cr17Mo, X07Cr11Mn12Ni4, X10Cr18Mn9Ni5, X30Cr17Ni7, X07Cr18Ni9, X04Cr19Ni9, X02Cr19Ni10, X15Cr24Ni13, X20Cr25Ni20, X04Cr17Ni12Mo2, X02Cr17Ni12Mo2, X04Cr17Ni12Mo2Ti, X04Cr18Ni10Ti, X04Cr18Ni10Nb and other specified grades. Conclusion IS 6911 SS X10Cr17Mn6Ni4N2O sheets, plates, and coils offered by Ladhani Metal Corporation, a manufacturer, supplier, and exporter, deliver a combination of excellent corrosion resistance, high strength, and structural stability, making them suitable for marine, petrochemical, power generation, and chemical industries. With availability in multiple grades as per IS 6911, we provide stainless steel solutions that meet both domestic and international standards. For inquiries or project requirements, contact Ladhani Metal Corporation. #Mumbai #Delhi #Chennai #Kolkata #Hyderabad #Bangalore #Pune #Ahmedabad #Surat #Rajkot #Vadodara #Coimbatore #Jaipur #Nagpur #Indore #Ludhiana #Kanpur #Bhubaneswar #Rourkela #Visakhapatnam #Trichy #Kochi #Mangalore #Jamnagar #Bharuch #Vapi #Hazira #Ankleshwar #Durgapur #Jamshedpur #Raipur #Bilaspur #Faridabad #Noida #Gurgaon #Chandigarh #Lucknow #Bhopal #Patna #Guwahati #Agra #Varanasi #Meerut #Ghaziabad #Moradabad #Aligarh #Aurangabad #Kolhapur #Nashik #Solapur #Thane #Amravati #Satara #Sangli #Hubli #Belgaum #Davangere #Mysore #Erode #Salem #Madurai #Tirunelveli #Tuticorin #Hosur #Nellore #Warangal #Karimnagar #Nanded #Udaipur #Ajmer #Jodhpur #Kota #Alwar #Gwalior #Rewa #Jhansi #IS6911sheetmanufacturer #IS6911sheet supplier # IS6911sheetexporter #IS6911 #IS6911StainlessSteel #IS6911Sheet #IS6911Plate #IS6911Coil #IS6911Strip #IS6911Manufacturer #IS6911Supplier #IS6911Exporter #StainlessSteelIndia #StainlessSteelSheet #StainlessSteelPlate #StainlessSteelCoil #StainlessSteelStrip #SS304 #SS304L #SS316 #SS316L #X04Cr12 #X07Cr17 #X12Cr12 #X20Cr13 #X30Cr13 #X40Cr13 #X15Cr16Ni2 #X108Cr17Mo #X07Cr18Ni9 #X04Cr19Ni9 #X02Cr19Ni10 #X15Cr24Ni13 #X20Cr25Ni20 #X04Cr17Ni12Mo2 #X02Cr17Ni12Mo2 #X04Cr17Ni12Mo2Ti #X04Cr18Ni10Ti #X04Cr18Ni10Nb #StainlessSteelGrades #StainlessSteelManufacturer #StainlessSteelSupplier #StainlessSteelExporter #StainlessSteelStockist #IndustrialStainlessSteel #BoilerStainlessSteel #PetrochemicalStainlessSteel #ChemicalIndustryStainlessSteel #MarineStainlessSteel #HeatResistantSteel #CorrosionResistantSteel #SSSheetsPlatesCoils #LadhaniMetalCorporation

Ladhani Metal Corporation, a manufacturer, supplier, and exporter, offers stainless steel sheets, plates, and coils in grade X108Cr17Mo as per IS 6911 specifications. X108Cr17Mo is a high-carbon martensitic stainless steel grade with molybdenum addition, designed to provide superior hardness, wear resistance, and enhanced corrosion resistance. With its ability to retain high strength after heat treatment, this grade is well-suited for cutting tools, industrial blades, and applications requiring long-lasting durability. Chemical Composition of X108Cr17Mo (as per IS 6911) • Carbon (C): 0.95% – 1.20% • Manganese (Mn): 1.0% max • Silicon (Si): 1.0% max • Phosphorus (P): 0.040% max • Sulphur (S): 0.030% max • Chromium (Cr): 16.0% – 18.0% • Molybdenum (Mo): 0.90% – 1.30% Functions and Characteristics • Provides very high hardness and strength after hardening and tempering • Molybdenum addition enhances corrosion resistance and pitting resistance • Offers excellent wear resistance, making it ideal for blades and cutting tools • Magnetic in nature with good edge retention and toughness • Available in annealed, hardened, or tempered condition to meet diverse application needs Applications • Power Generation – High-wear turbine parts and steam-handling components • Oil and Gas – Shafts, valves, pump parts, and components exposed to corrosive fluids • Petrochemical Industry – Blades, knives, reactor parts, and heat exchanger components • Fertilizer Plants – Abrasion-resistant machinery and chemical-handling equipment • Chemical Industry – Cutting edges, processing equipment, and precision parts • Marine Engineering – Offshore and ship components requiring wear and corrosion resistance • Automotive Industry – Engine components, fasteners, clamps, and high-strength parts • Food Processing – Knives, blades, and wear-resistant cutting equipment • Construction – Structural applications demanding high hardness and durability • General Engineering – Tools, surgical instruments, and machine parts requiring edge retention Available Forms • Stainless steel sheets • Stainless steel plates • Stainless steel coils Grades Available under IS 6911 Apart from X108Cr17Mo, IS 6911 also covers a wide range of stainless steel grades, including X04Cr12, X07Cr17, X12Cr12, X20Cr13, X30Cr13, X40Cr13, X15Cr16Ni2, X10Cr17Mn6Ni4N2O, X07Cr11Mn12Ni4, X10Cr18Mn9Ni5, X30Cr17Ni7, X07Cr18Ni9, X04Cr19Ni9, X02Cr19Ni10, X15Cr24Ni13, X20Cr25Ni20, X04Cr17Ni12Mo2, X02Cr17Ni12Mo2, X04Cr17Ni12Mo2Ti, X04Cr18Ni10Ti, X04Cr18Ni10Nb and other specified grades. Conclusion IS 6911 SS X108Cr17Mo sheets, plates, and coils offered by Ladhani Metal Corporation, a manufacturer, supplier, and exporter, combine exceptional hardness, wear resistance, and improved corrosion resistance, making them suitable for industrial blades, tools, and heavy-duty engineering applications. With availability in multiple grades as per IS 6911, we provide solutions that meet both domestic and international standards. For inquiries or project requirements, contact Ladhani Metal Corporation. #Mumbai #Delhi #Chennai #Kolkata #Hyderabad #Bangalore #Pune #Ahmedabad #Surat #Rajkot #Vadodara #Coimbatore #Jaipur #Nagpur #Indore #Ludhiana #Kanpur #Bhubaneswar #Rourkela #Visakhapatnam #Trichy #Kochi #Mangalore #Jamnagar #Bharuch #Vapi #Hazira #Ankleshwar #Durgapur #Jamshedpur #Raipur #Bilaspur #Faridabad #Noida #Gurgaon #Chandigarh #Lucknow #Bhopal #Patna #Guwahati #Agra #Varanasi #Meerut #Ghaziabad #Moradabad #Aligarh #Aurangabad #Kolhapur #Nashik #Solapur #Thane #Amravati #Satara #Sangli #Hubli #Belgaum #Davangere #Mysore #Erode #Salem #Madurai #Tirunelveli #Tuticorin #Hosur #Nellore #Warangal #Karimnagar #Nanded #Udaipur #Ajmer #Jodhpur #Kota #Alwar #Gwalior #Rewa #Jhansi #IS6911sheetmanufacturer #IS6911sheet supplier # IS6911sheetexporter #IS6911 #IS6911StainlessSteel #IS6911Sheet #IS6911Plate #IS6911Coil #IS6911Strip #IS6911Manufacturer #IS6911Supplier #IS6911Exporter #StainlessSteelIndia #StainlessSteelSheet #StainlessSteelPlate #StainlessSteelCoil #StainlessSteelStrip #SS304 #SS304L #SS316 #SS316L #X04Cr12 #X07Cr17 #X12Cr12 #X20Cr13 #X30Cr13 #X40Cr13 #X15Cr16Ni2 #X108Cr17Mo #X07Cr18Ni9 #X04Cr19Ni9 #X02Cr19Ni10 #X15Cr24Ni13 #X20Cr25Ni20 #X04Cr17Ni12Mo2 #X02Cr17Ni12Mo2 #X04Cr17Ni12Mo2Ti #X04Cr18Ni10Ti #X04Cr18Ni10Nb #StainlessSteelGrades #StainlessSteelManufacturer #StainlessSteelSupplier #StainlessSteelExporter #StainlessSteelStockist #IndustrialStainlessSteel #BoilerStainlessSteel #PetrochemicalStainlessSteel #ChemicalIndustryStainlessSteel #MarineStainlessSteel #HeatResistantSteel #CorrosionResistantSteel #SSSheetsPlatesCoils #LadhaniMetalCorporation

Ladhani Metal Corporation, a manufacturer, supplier, and exporter, offers stainless steel sheets, plates, and coils in grade X15Cr16Ni2 as per IS 6911 specifications. X15Cr16Ni2 is a martensitic stainless steel grade alloyed with nickel to enhance toughness, corrosion resistance, and mechanical properties. It provides a balance of strength, hardness, and resistance to wear, making it suitable for demanding applications across multiple industries. Manufactured with precision and adherence to international standards, our products ensure durability and reliable service life. Chemical Composition of X15Cr16Ni2 (as per IS 6911) • Carbon (C): 0.12% – 0.18% • Manganese (Mn): 1.0% max • Silicon (Si): 1.0% max • Phosphorus (P): 0.040% max • Sulphur (S): 0.030% max • Chromium (Cr): 15.0% – 17.0% • Nickel (Ni): 1.5% – 2.5% Functions and Characteristics • Offers a combination of high hardness, strength, and toughness after heat treatment • Provides better corrosion resistance compared to standard martensitic grades due to nickel addition • Maintains good wear and abrasion resistance for components under load and friction • Supplied in annealed, quenched, or tempered condition depending on customer requirements • Magnetic in nature with improved structural toughness Applications • Power Generation – Turbine blades, boiler parts, and steam piping systems • Oil and Gas – Shafts, valves, pumps, and wear-resistant components • Petrochemical Industry – Reactors, processing units, and heat exchangers • Fertilizer Plants – Equipment exposed to chemical and abrasive conditions • Chemical Industry – Pressure vessels, process equipment, and industrial fittings • Marine Engineering – Ship components, offshore platforms, and seawater systems • Automotive Industry – Exhaust components, clamps, fasteners, and structural elements • Food Processing – Cutting tools, machinery, and wear-resistant hygienic parts • Construction – Structural steel, load-bearing parts, and architectural applications • General Engineering – Machine parts, blades, tools, and fasteners Available Forms • Stainless steel sheets • Stainless steel plates • Stainless steel coils Grades Available under IS 6911 Apart from X15Cr16Ni2, IS 6911 also covers a wide range of stainless steel grades, including X04Cr12, X07Cr17, X12Cr12, X20Cr13, X30Cr13, X40Cr13, X108Cr17Mo, X10Cr17Mn6Ni4N2O, X07Cr11Mn12Ni4, X10Cr18Mn9Ni5, X30Cr17Ni7, X07Cr18Ni9, X04Cr19Ni9, X02Cr19Ni10, X15Cr24Ni13, X20Cr25Ni20, X04Cr17Ni12Mo2, X02Cr17Ni12Mo2, X04Cr17Ni12Mo2Ti, X04Cr18Ni10Ti, X04Cr18Ni10Nb and other specified grades. Conclusion IS 6911 SS X15Cr16Ni2 sheets, plates, and coils offered by Ladhani Metal Corporation, a manufacturer, supplier, and exporter, deliver superior strength, hardness, and enhanced corrosion resistance, making them a reliable choice for industries such as power generation, petrochemicals, marine, and engineering. With availability in multiple grades as per IS 6911, we provide stainless steel solutions that meet both domestic and international standards. For inquiries or project requirements, contact Ladhani Metal Corporation. #Mumbai #Delhi #Chennai #Kolkata #Hyderabad #Bangalore #Pune #Ahmedabad #Surat #Rajkot #Vadodara #Coimbatore #Jaipur #Nagpur #Indore #Ludhiana #Kanpur #Bhubaneswar #Rourkela #Visakhapatnam #Trichy #Kochi #Mangalore #Jamnagar #Bharuch #Vapi #Hazira #Ankleshwar #Durgapur #Jamshedpur #Raipur #Bilaspur #Faridabad #Noida #Gurgaon #Chandigarh #Lucknow #Bhopal #Patna #Guwahati #Agra #Varanasi #Meerut #Ghaziabad #Moradabad #Aligarh #Aurangabad #Kolhapur #Nashik #Solapur #Thane #Amravati #Satara #Sangli #Hubli #Belgaum #Davangere #Mysore #Erode #Salem #Madurai #Tirunelveli #Tuticorin #Hosur #Nellore #Warangal #Karimnagar #Nanded #Udaipur #Ajmer #Jodhpur #Kota #Alwar #Gwalior #Rewa #Jhansi #IS6911sheetmanufacturer #IS6911sheet supplier # IS6911sheetexporter #IS6911 #IS6911StainlessSteel #IS6911Sheet #IS6911Plate #IS6911Coil #IS6911Strip #IS6911Manufacturer #IS6911Supplier #IS6911Exporter #StainlessSteelIndia #StainlessSteelSheet #StainlessSteelPlate #StainlessSteelCoil #StainlessSteelStrip #SS304 #SS304L #SS316 #SS316L #X04Cr12 #X07Cr17 #X12Cr12 #X20Cr13 #X30Cr13 #X40Cr13 #X15Cr16Ni2 #X108Cr17Mo #X07Cr18Ni9 #X04Cr19Ni9 #X02Cr19Ni10 #X15Cr24Ni13 #X20Cr25Ni20 #X04Cr17Ni12Mo2 #X02Cr17Ni12Mo2 #X04Cr17Ni12Mo2Ti #X04Cr18Ni10Ti #X04Cr18Ni10Nb #StainlessSteelGrades #StainlessSteelManufacturer #StainlessSteelSupplier #StainlessSteelExporter #StainlessSteelStockist #IndustrialStainlessSteel #BoilerStainlessSteel #PetrochemicalStainlessSteel #ChemicalIndustryStainlessSteel #MarineStainlessSteel #HeatResistantSteel #CorrosionResistantSteel #SSSheetsPlatesCoils #LadhaniMetalCorporation

Ladhani Metal Corporation, a manufacturer, supplier, and exporter, offers stainless steel sheets, plates, and coils in grade X40Cr13 as per IS 6911 specifications. X40Cr13 is a high-carbon martensitic stainless steel grade that provides very high hardness, wear resistance, and cutting-edge strength. With proper heat treatment, it achieves excellent mechanical properties along with fair corrosion resistance. Manufactured with precision and strict adherence to standards, our products deliver reliable performance in industrial and engineering applications. Chemical Composition of X40Cr13 (as per IS 6911) • Carbon (C): 0.36% – 0.45% • Manganese (Mn): 1.0% max • Silicon (Si): 1.0% max • Phosphorus (P): 0.040% max • Sulphur (S): 0.030% max • Chromium (Cr): 12.0% – 14.0% • Nickel (Ni): 0.6% max Functions and Characteristics • Achieves very high hardness after hardening and tempering • Provides superior wear and abrasion resistance in demanding applications • Offers fair corrosion resistance in mildly corrosive and oxidizing environments • Maintains sharp edges, making it ideal for blades and cutting tools • Magnetic in nature with high strength and toughness Applications • Power Generation – Turbine parts, boiler components, and high-wear machinery • Oil and Gas – Valves, shafts, pumps, and wear-resistant parts • Petrochemical Industry – Heat exchangers, process equipment, and fittings • Fertilizer Plants – Components exposed to abrasive and corrosive chemicals • Chemical Industry – Suitable for process vessels and plant equipment • Marine Engineering – Applied in offshore structures, pumps, and ship components • Automotive Industry – Blades, fasteners, exhaust parts, and structural applications • Food Processing – Cutting tools, knives, blades, and wear-resistant machinery • Construction – Load-bearing steel parts and architectural elements • General Engineering – Surgical instruments, machine parts, and wear tools Available Forms • Stainless steel sheets • Stainless steel plates • Stainless steel coils Grades Available under IS 6911 Apart from X40Cr13, IS 6911 also covers a wide range of stainless steel grades, including X04Cr12, X07Cr17, X12Cr12, X20Cr13, X30Cr13, X15Cr16Ni2, X108Cr17Mo, X10Cr17Mn6Ni4N2O, X07Cr11Mn12Ni4, X10Cr18Mn9Ni5, X30Cr17Ni7, X07Cr18Ni9, X04Cr19Ni9, X02Cr19Ni10, X15Cr24Ni13, X20Cr25Ni20, X04Cr17Ni12Mo2, X02Cr17Ni12Mo2, X04Cr17Ni12Mo2Ti, X04Cr18Ni10Ti, X04Cr18Ni10Nb and other specified grades. Conclusion IS 6911 SS X40Cr13 sheets, plates, and coils offered by Ladhani Metal Corporation, a manufacturer, supplier, and exporter, deliver superior hardness, wear resistance, and mechanical strength, making them an excellent choice for cutting tools, blades, and heavy-duty industrial components. With availability in multiple grades as per IS 6911, we provide solutions that meet both domestic and international standards. For inquiries or project requirements, contact Ladhani Metal Corporation. #Mumbai #Delhi #Chennai #Kolkata #Hyderabad #Bangalore #Pune #Ahmedabad #Surat #Rajkot #Vadodara #Coimbatore #Jaipur #Nagpur #Indore #Ludhiana #Kanpur #Bhubaneswar #Rourkela #Visakhapatnam #Trichy #Kochi #Mangalore #Jamnagar #Bharuch #Vapi #Hazira #Ankleshwar #Durgapur #Jamshedpur #Raipur #Bilaspur #Faridabad #Noida #Gurgaon #Chandigarh #Lucknow #Bhopal #Patna #Guwahati #Agra #Varanasi #Meerut #Ghaziabad #Moradabad #Aligarh #Aurangabad #Kolhapur #Nashik #Solapur #Thane #Amravati #Satara #Sangli #Hubli #Belgaum #Davangere #Mysore #Erode #Salem #Madurai #Tirunelveli #Tuticorin #Hosur #Nellore #Warangal #Karimnagar #Nanded #Udaipur #Ajmer #Jodhpur #Kota #Alwar #Gwalior #Rewa #Jhansi #IS6911sheetmanufacturer #IS6911sheet supplier # IS6911sheetexporter #IS6911 #IS6911StainlessSteel #IS6911Sheet #IS6911Plate #IS6911Coil #IS6911Strip #IS6911Manufacturer #IS6911Supplier #IS6911Exporter #StainlessSteelIndia #StainlessSteelSheet #StainlessSteelPlate #StainlessSteelCoil #StainlessSteelStrip #SS304 #SS304L #SS316 #SS316L #X04Cr12 #X07Cr17 #X12Cr12 #X20Cr13 #X30Cr13 #X40Cr13 #X15Cr16Ni2 #X108Cr17Mo #X07Cr18Ni9 #X04Cr19Ni9 #X02Cr19Ni10 #X15Cr24Ni13 #X20Cr25Ni20 #X04Cr17Ni12Mo2 #X02Cr17Ni12Mo2 #X04Cr17Ni12Mo2Ti #X04Cr18Ni10Ti #X04Cr18Ni10Nb #StainlessSteelGrades #StainlessSteelManufacturer #StainlessSteelSupplier #StainlessSteelExporter #StainlessSteelStockist #IndustrialStainlessSteel #BoilerStainlessSteel #PetrochemicalStainlessSteel #ChemicalIndustryStainlessSteel #MarineStainlessSteel #HeatResistantSteel #CorrosionResistantSteel #SSSheetsPlatesCoils #LadhaniMetalCorporation