'minimizes stress'

Ladhani Metal Corporation offers SS Half Round Wedge Wire (WW) Tube Shields specially engineered to protect boiler tubes in power plants, refineries, petrochemical heaters, waste heat recovery boilers (WHRBs), and heat recovery steam generators (HRSGs). These shields are manufactured with a wedge wire surface that improves erosion resistance, enhances flue gas flow dynamics, and minimizes localized turbulence. Designed for severe operating environments, SS WW Tube Shields ensure reliable tube protection under high-velocity flue gas and abrasive ash particle exposure. Function of WW Tube Shields • Protect boiler tubes from erosion, oxidation, and soot blower jet impact • Reduce turbulence by guiding flue gas flow smoothly over tube surfaces • Increase service life of tubes operating in dust-laden high-temperature zones • Minimize downtime and maintenance in critical boiler sections Ladhani Metal Corporation manufactures, supplies, and exports SS Half Round Wedge Wire Tube Shields in standard and custom sizes, catering to both domestic and international boiler maintenance requirements. Available Grades • SS 304 / SS 304L • SS 310 / SS 310S • SS 316 / SS 316L • SS 410 / SS 420 / SS 430 • 1Cr13 • 1Cr18Ni9Ti • 1Cr20Ni14Si2 • 1Cr25Ni20Si2 • Cr23Ni13 • Cr25Ni20 Applications: Ideal for superheater, reheater, economizer, and LTSH sections of boilers where tube surfaces are exposed to abrasive flue gases, ash, and high thermal stresses. Uses • Shields boiler tubes from fly ash erosion and hot flue gases • Protects against damage from soot blowers and particle impact • Extends tube service life in high-temperature operations • Suitable for power generation, petrochemical, and refinery boilers Features • Wedge wire design for superior erosion and wear resistance • High mechanical strength with thermal stability • Corrosion and oxidation resistance under high heat • Precision-engineered for accurate fit and easy installation Applications • Power generation boilers – Reheater and superheater tube protection • Waste heat recovery boilers – Safeguards against abrasive gas flows • HRSGs – Long-lasting erosion protection for high-velocity flue gas paths • Petrochemical and refinery heaters – Durable performance in extreme heat Conclusion The SS Half Round Wedge Wire (WW) Tube Shield from Ladhani Metal Corporation provides advanced erosion protection, extended service life, and reliability in the most demanding boiler environments. Available in a wide range of stainless steel and alloy grades, these shields deliver precision, durability, and global supply capability for the power and process industries. #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Muzaffarpur#halftubeshield #utypehalftubeshield #tubeshieldexporter #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier #SSShielding #IndustrialTubeShield #BoilerTubeGuard #CustomMetalParts #SteelIndustryIndia #MetalEngineering #HeavyIndustrySupply #StainlessSteelIndia #SteelExporters #MetalComponentExport #FabricatedProducts #SteelDealer #IndustrialSupplyIndia #BoilerTubeFittings #TubeShieldingSolutions #HalfTubeCover #HeatExchangerShield #HalfRoundReheaterShield #ReheaterTubeShield #BoilerReheaterProtection #PowerPlantTubeShield #BoilerErosionShield #SteamBoilerTubeShield #HighTempTubeShield #BoilerWearProtection

Ladhani Metal Corporation manufactures Arc Tube Shields engineered to protect boiler tubes in areas subjected to severe erosion, high-velocity flue gases, and soot blower impact. Arc Tube Shields are precision-formed to cover the tube surface at specific angles, providing enhanced protection where abrasive particles and thermal stresses are most concentrated. They are widely used in superheaters, reheaters, economizers, and waste heat recovery boilers, ensuring extended service life and improved operational efficiency. Function of Arc Tube Shields • Protect boiler tubes from localized erosion and high-temperature oxidation • Provide coverage in angular positions most prone to flue gas impact • Extend tube life in high-stress and ash-laden boiler zones • Reduce downtime and maintenance costs in boilers and HRSG systems Ladhani Metal Corporation manufactures, supplies, and exports Arc Tube Shields in multiple sizes, thicknesses, and custom radii to match exact tube curvature for power plants, WHRBs, HRSGs, and industrial boilers. Available Grades • SS 304 / SS 304L • SS 310 / SS 310S • SS 316 / SS 316L • SS 410 / SS 420 / SS 430 • 1Cr13 • 1Cr18Ni9Ti • 1Cr20Ni14Si2 • 1Cr25Ni20Si2 • Cr23Ni13 • Cr25Ni20 Applications: Thermal power plants, waste heat recovery boilers, HRSGs, petrochemical heaters, and cement industry boilers operating under erosive and high-temperature conditions. Uses • Shields tube surfaces exposed to flue gas turbulence • Protects elbows, bends, and critical tube sections from ash erosion • Minimizes wear caused by soot blower operation • Extends tube service life and reliability Features • Excellent resistance to erosion and oxidation at elevated temperatures • High mechanical strength with precision fit • Available in stainless steels and special alloys for diverse boiler environments • Easy to install and replace during boiler maintenance Applications • Power generation boilers – Protection in high-erosion flue gas paths • WHRBs and HRSGs – Long-term durability under cyclic operation • Industrial boilers – Enhanced reliability in abrasive environments • Process heaters – Protection against scaling, oxidation, and erosion Conclusion Arc Tube Shields by Ladhani Metal Corporation offer reliable protection for boiler tubes against erosion, scaling, and oxidation. Manufactured in stainless steel grades (SS 304/304L, SS 310/310S, SS 316/316L, SS 410/420/430) and special alloys (1Cr13, 1Cr18Ni9Ti, 1Cr20Ni14Si2, 1Cr25Ni20Si2, Cr23Ni13, Cr25Ni20), these shields are designed for durability, precision fit, and export-ready performance in critical boiler operations. #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Muzaffarpur#halftubeshield #utypehalftubeshield #tubeshieldexporter #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier #SSShielding #IndustrialTubeShield #BoilerTubeGuard #CustomMetalParts #SteelIndustryIndia #MetalEngineering #HeavyIndustrySupply #StainlessSteelIndia #SteelExporters #MetalComponentExport #FabricatedProducts #SteelDealer #IndustrialSupplyIndia #BoilerTubeFittings #TubeShieldingSolutions #HalfTubeCover #HeatExchangerShield #HalfRoundReheaterShield #ReheaterTubeShield #BoilerReheaterProtection #PowerPlantTubeShield #BoilerErosionShield #SteamBoilerTubeShield #HighTempTubeShield #BoilerWearProtection

Ladhani Metal Corporation manufactures, supplies, and exports Boiler Tube Protection Shields and Bends, engineered to safeguard boiler tubes at critical sections such as bends, high-velocity flue gas zones, and soot blower impact areas. These shields are precision-formed to match the outer curvature of tubes, providing a sacrificial protective layer that prevents erosion, corrosion, oxidation, and localized tube thinning. By extending the service life of boiler tubes, they reduce unplanned shutdowns and maintenance costs while ensuring efficient operation of boilers, HRSGs, and heat recovery systems. Function of Boiler Tube Protection Shield / Bend • Protects tube bends and exposed surfaces from high-temperature erosion • Minimizes oxidation and corrosion damage in flue gas streams • Guards tubes from abrasive fly ash and soot blower jets • Extends operational reliability in high-stress boiler environments Available Grades Stainless Steel Grades • SS 304 / SS 304L • SS 310 / SS 310S • SS 316 / SS 316L • SS 410 / SS 420 / SS 430 Special Alloy Grades • 1Cr18Ni9Ti • Cr25Ni20 • 1Cr25Ni20Si2 • Cr23Ni13 • 1Cr20Ni14Si2 • 1Cr13 Applications • Power generation boilers – protection of tube bends in superheater and reheater sections • Waste Heat Recovery Boilers (WHRBs) – erosion resistance in high-velocity flue gas regions • Heat Recovery Steam Generators (HRSGs) – protection of critical bends in thermal cycles • Industrial boilers – extended life for tubes in erosive and corrosive service zones • Petrochemical and process heaters – reliable protection in high-temperature tube bends Features • Superior corrosion and oxidation resistance • High mechanical strength and thermal stability • Designed for precise fit on straight tubes and bends • Manufactured in a wide range of stainless steel and alloy grades • Long-lasting, low-maintenance tube protection solution Conclusion Boiler Tube Protection Shields and Bends from Ladhani Metal Corporation deliver robust protection for tubes operating under extreme thermal and erosive conditions. Available in multiple stainless steel and special alloy grades, these shields ensure longer tube life, reduced maintenance costs, and higher boiler efficiency in domestic and international power and industrial applications. #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Muzaffarpur#halftubeshield #utypehalftubeshield #tubeshieldexporter #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier #SSShielding #IndustrialTubeShield #BoilerTubeGuard #CustomMetalParts #SteelIndustryIndia #MetalEngineering #HeavyIndustrySupply #StainlessSteelIndia #SteelExporters #MetalComponentExport #FabricatedProducts #SteelDealer #IndustrialSupplyIndia #BoilerTubeFittings #TubeShieldingSolutions #HalfTubeCover #HeatExchangerShield #HalfRoundReheaterShield #ReheaterTubeShield #BoilerReheaterProtection #PowerPlantTubeShield #BoilerErosionShield #SteamBoilerTubeShield #HighTempTubeShield #BoilerWearProtection#BoilerTubeProtection #BoilerTubeShield #BoilerBendShield #HalfRoundTubeShield #BoilerTubeWearProtection #PowerPlantTubeShield #BoilerTubeErosionShield #BoilerTubeProtectionShield #BoilerTubeSafety #BoilerTubeBendShield #IndustrialBoilerShield #SteamBoilerTubeProtection #HeatExchangerTubeShield #BoilerTubeGuard #BoilerTubeShielding

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are engineered to protect boiler tubes, superheaters, and heat exchanger coils from erosion, corrosion, scaling, and ash deposition. These shields are widely used in thermal power stations, steam generation units, and waste heat recovery systems to prolong tube life and maintain energy efficiency. Their semi-cylindrical shape enables secure coverage of curved or straight tube surfaces, particularly in high-wear and abrasive flow regions. SS 316L Half Round Tube Shield for LTSH Tube The SS 316L Half Round Tube Shield is manufactured using low-carbon austenitic stainless steel grade 316L, known for its excellent resistance to chloride-induced corrosion, pitting, and crevice attack. Its lower carbon content minimizes the risk of carbide precipitation during welding, making it highly suitable for environments with frequent thermal cycling and corrosive gas exposure. Specifically designed for Low Temperature Superheater (LTSH) applications, this shield safeguards boiler tubes from soot erosion, acidic flue gases, and surface degradation. The Low Temperature Superheater (LTSH) is a section in a boiler where saturated steam from the steam drum is superheated to a moderately higher temperature before entering the high-temperature superheater stages. Positioned in areas with relatively lower flue gas temperatures, the LTSH helps improve thermal efficiency and reduces moisture content in steam. Due to constant exposure to abrasive flue gases and ash, LTSH tubes are prone to wear and require protective shielding, such as half round tube shields, to extend service life. Ladhani Metal Corporation is a leading manufacturer, supplier, and exporter of SS 316L Half Round Tube Shields for LTSH systems, delivering corrosion-resistant, durable, and performance-oriented solutions tailored to thermal protection needs. Chemical Composition of SS 316L – Low Carbon Austenitic Stainless Steel • Carbon (C): ≤ 0.035% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 16.0 – 18.0% • Nickel (Ni): 10.0 – 14.0% • Molybdenum (Mo): 2.0 – 3.0% • Iron (Fe): Balance Applications: Designed for LTSH and low-temperature convection zones exposed to acidic gas environments, moisture, or chlorides, where enhanced corrosion resistance is required. Uses • Installed on LTSH tube surfaces in utility boilers to guard against flue gas corrosion and thermal wear • Shields tubes in HRSGs, economizers, and convection coil banks exposed to ash-laden gas flow • Used in waste heat recovery units operating with corrosive fuel byproducts • Ideal for process boilers in coastal, marine, or high-humidity environments • Protects tube surfaces in low to moderate heat applications where weldability is a concern Features • Excellent corrosion resistance – Resists chloride, acidic gas, and flue-induced degradation • Enhanced weldability – Low carbon content minimizes sensitization during installation • Precision fabrication – Custom-sized to match LTSH tube geometry and coil configuration • Quick installation – Compatible with clamp-on, tack weld, or banding methods • Reduced maintenance – Extends tube service life in flue gas zones, minimizing replacement costs • Available in varied thicknesses and lengths per system specifications Applications • thermal power plants – Shields LTSH tubes from moisture corrosion and fly ash erosion • chemical and refinery boilers – Protects superheater coils exposed to process gases and acidic residues • waste heat recovery – Installed in WHRBs to protect low-temperature return bends and convection sections • steam generation systems – Guards against corrosion in zones with flue gas condensation • marine and coastal facilities – Effective in chloride-laden environments requiring enhanced protection Conclusion The SS 316L Half Round Tube Shield for LTSH Tube by Ladhani Metal Corporation – manufacturer, supplier, and exporter – offers high-quality protection for boiler and superheater tubes in corrosive, low-temperature applications. With outstanding corrosion resistance and excellent performance under thermal stress, it ensures long-term durability and minimal maintenance in critical energy systems. For custom sizes, material consultation, or pricing details, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are protective components engineered to shield boiler tubes, superheaters, and heat exchangers from erosion, scaling, and ash impact. These shields are widely used in thermal power plants, industrial steam systems, and waste heat recovery units to prolong tube life and enhance operational reliability. Their semi-cylindrical shape allows for easy installation over exposed tube surfaces, especially in zones exposed to abrasive flue gases and thermal stress. SS 310S Half Round Tube Shield for LTSH Tube The SS 310S Half Round Tube Shield is manufactured from low-carbon austenitic stainless steel grade 310S. With high chromium and nickel content, it offers excellent resistance to oxidation and scaling at elevated temperatures, while its reduced carbon level enhances weldability and reduces the risk of sensitization. This makes it ideal for Low Temperature Superheater (LTSH) applications, where tubes are exposed to flue gas streams, ash particles, and moderate thermal cycling. The Low Temperature Superheater (LTSH) is a section in a boiler where saturated steam from the steam drum is superheated to a moderately higher temperature before entering the high-temperature superheater stages. Positioned in areas with relatively lower flue gas temperatures, the LTSH helps improve thermal efficiency and reduces moisture content in steam. Due to constant exposure to abrasive flue gases and ash, LTSH tubes are prone to wear and require protective shielding, such as half round tube shields, to extend service life. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of SS 310S Half Round Tube Shields for LTSH tubes, offering high-performance shielding solutions for long-term service in boiler and heat recovery systems. Chemical Composition of SS 310S – Low Carbon Austenitic Stainless Steel • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.50% • Chromium (Cr): 24.0 – 26.0% • Nickel (Ni): 19.0 – 22.0% • Iron (Fe): Balance Applications: Suitable for areas with exposure to moderate temperatures, oxidizing gases, and ash deposition where high-temperature strength and corrosion resistance are critical. Uses • Protects LTSH tubes in power boilers from ash erosion, soot impact, and flue gas corrosion • Used in convection zones of HRSGs, economizers, and waste heat recovery units • Shields tube surfaces in steam generation systems exposed to gas turbulence and thermal cycling • Effective in industrial heating systems and chemical boilers facing scale formation and heat stress • Enhances durability of tubes in coal-fired and biomass-fired boilers with fly ash carryover Features • Excellent oxidation and scaling resistance – Performs in oxidizing environments and thermal zones • Superior weldability – Low carbon content minimizes risk of intergranular corrosion during welding • Tailored protection – Custom-fabricated to match tube diameter, bend radius, and system layout • Simple installation – Compatible with clamping, banding, or welding methods for quick setup • Extended tube life – Minimizes erosion and surface degradation, reducing maintenance downtime • Available in various lengths and thicknesses per system requirements Applications • thermal power plants – Installed on LTSH tube banks for long-term protection against erosion and corrosion • waste heat recovery boilers – Shields curved tubes in return flow zones with ash-laden flue gas • petrochemical units – Applied on steam coils and heat exchanger tubes operating under oxidizing gas exposure • utility boilers – Protects superheater tubes from scaling and particulate impact in low-temperature sections • industrial boiler systems – Enhances performance and service life of steam tubes in energy recovery zones Conclusion The SS 310S Half Round Tube Shield for LTSH Tube by Ladhani Metal Corporation – manufacturer, supplier, and exporter – offers reliable protection for superheater tubes operating in low-temperature, oxidizing, and abrasive flue gas environments. With enhanced weldability, high-temperature resistance, and custom-fit fabrication, this shield ensures dependable performance across a wide range of thermal and industrial applications. For technical assistance, tailored designs, or quotation requests, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are engineered to protect the surfaces of boiler tubes, superheaters, and heat exchanger coils from high-temperature corrosion, erosion, slag deposition, and scaling. Widely used in power generation, petrochemical, and industrial processing systems, these shields are fabricated with a half-round profile that allows quick installation over curved or straight tube surfaces, extending service life and minimizing repair and replacement needs. Cr23Ni13 U Type Inner Half Round Tube Shield The Cr23Ni13 U Type Inner Half Round Tube Shield is manufactured from a chromium-nickel austenitic alloy known for its excellent high-temperature resistance, structural stability, and corrosion resistance. It performs reliably under continuous thermal exposure and is well-suited for systems exposed to oxidizing, carburizing, and sulfur-rich gases. The inner U-type configuration is designed specifically to shield the inner arc of U-bend tubes, which are more susceptible to localized turbulence, thermal fatigue, and scale formation. • Inner U Type Half Round Tube Shield – Covers the internal curvature of U-bend tubes, providing targeted protection from flue gas erosion, thermal scaling, and corrosion. Ladhani Metal Corporation is a leading manufacturer, supplier, and exporter of Cr23Ni13 U Type Inner Half Round Tube Shields, offering precision-engineered solutions for high-performance thermal and chemical systems. Chemical Composition of Cr23Ni13 – Austenitic Heat-Resistant Steel • Carbon (C): ≤ 0.12% • Manganese (Mn): ≤ 1.50% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.50% • Chromium (Cr): 22.0 – 24.0% • Nickel (Ni): 12.0 – 14.0% • Iron (Fe): Balance Applications: Suitable for continuous exposure to high temperatures in oxidizing and chemically aggressive environments. Ideal for inner bend protection in return coil systems subjected to high thermal load and corrosive gas flow. Uses • Protects inner arcs of U-bend tubes in thermal power plant superheaters, reheaters, and economizers • Installed in WHRBs and HRSGs to resist scale and slag in return bends exposed to flue gas turbulence • Applied in steam reformers, process furnaces, and heat exchangers where inner tube surfaces face corrosive and hot gas impact • Used in chemical reactors and cracking units operating under cyclic thermal and chemical stress • Suitable for long-term protection of curved tubes in industrial combustion and heating equipment Features • High-temperature oxidation resistance – Performs in continuous service above 1000°C • Inner arc shielding – Targets protection for the most erosion-prone and heat-stressed tube area • Corrosion resistance – Withstands exposure to sulfur-rich gases, acidic vapors, and flue gas byproducts • Fabricated to specification – Available in custom sizes and bend radii for a precise fit and stable coverage • Simple installation – Can be secured using clamping, banding, or welding without disrupting the system • Extended service life – Reduces risk of tube failure, minimizes maintenance downtime, and improves system efficiency Applications • thermal and power generation – Protects inner U-bend surfaces from corrosion and erosion in steam circuits • petrochemical processing – Shields return bends in reformers and exchangers from hot process gases • waste heat recovery – Used in curved tubes of WHRBs and HRSGs for inner arc scale protection • chemical industry – Applied in reactors and thermal systems subjected to chemical vapors and high heat • furnace and incineration systems – Effective in resisting slag and gas-induced wear in industrial burners Conclusion The Cr23Ni13 U Type Inner Half Round Tube Shield by Ladhani Metal Corporation – manufacturer, supplier, and exporter – offers dependable inner arc protection for U-bend tubes operating in aggressive thermal and chemical environments. Its high-temperature and corrosion-resistant properties make it ideal for safeguarding critical process tubes across a range of high-performance industrial systems. For technical consultation, customized fabrication, or quotations, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are engineered to protect heat exchanger, boiler, and superheater tubes from erosion, thermal scaling, and high-temperature corrosion. These shields are widely used in power plants, petrochemical systems, and high-temperature industrial equipment where tubes are exposed to direct flame, turbulent gas flow, and particulate matter. Their half-round shape ensures easy installation over curved or straight tube surfaces, providing an effective layer of protection without the need for equipment disassembly. SS 310S U Type Inner Half Round Tube Shield The SS 310S U Type Inner Half Round Tube Shield is made from stainless steel grade 310S, a low-carbon variant of SS 310. It offers excellent resistance to oxidation and high-temperature corrosion while providing improved weldability and reduced risk of sensitization during thermal cycling. This inner U-type shield is specifically designed to cover the inside arc of U-bend tubes, an area commonly affected by accelerated wear due to turbulence, heat concentration, and gas flow deflection. • Inner U Type Half Round Tube Shield – Designed to protect the inner curvature of U-bend tubes from erosion, slag buildup, and oxidation caused by high-velocity gas flow and thermal cycling. Ladhani Metal Corporation is a recognized manufacturer, supplier, and exporter of SS 310S U Type Inner Half Round Tube Shields, providing tailored solutions for heat-exposed systems in demanding industrial environments. Chemical Composition of SS 310S – Low Carbon Austenitic Stainless Steel • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.50% • Chromium (Cr): 24.0 – 26.0% • Nickel (Ni): 19.0 – 22.0% • Iron (Fe): Balance Applications: Best suited for oxidizing and high-temperature environments where welded structures are used and resistance to thermal fatigue is critical. Uses • Inner arc shielding for U-bend tubes in high-temperature boilers and superheaters • Installed in the return bends of HRSGs and waste heat recovery boilers (WHRBs) • Used in curved sections of heat exchangers exposed to combustion gases and fluctuating heat • Protects tube bends in petrochemical reactors, reformers, and process furnaces • Ideal for inner arc protection in high-temperature flue gas zones and incinerator coils Features • Excellent high-temperature oxidation resistance – Effective performance in environments up to 1050°C • Low carbon content – Reduces risk of intergranular corrosion after welding or extended service • Focused protection – Shields the inner bend surface most prone to gas turbulence and scaling • Accurate fitment – Custom-fabricated to match specific tube sizes and radii for optimal coverage • Fast installation – Can be securely mounted using stainless steel clamps, bands, or welds • Reliable performance – Enhances the lifespan of U-bend tubes and minimizes maintenance in heat-affected areas Applications • power plants – Used on U-bend inner surfaces in superheaters and reheaters to resist scale and corrosion • petrochemical industry – Shields inside tube arcs in reformers and exchangers exposed to hot process gases • waste heat systems – Protects internal tube bends in WHRBs and HRSGs from slag and thermal fatigue • chemical plants – Provides corrosion protection for return bends in reactors and condensers • high-temperature industrial units – Installed in curved tube coils subjected to flame exposure and oxidizing gases Conclusion The SS 310S U Type Inner Half Round Tube Shield by Ladhani Metal Corporation – manufacturer, supplier, and exporter – is a dependable, high-temperature protective solution for shielding the inner arc of U-bend tubes. With its excellent oxidation resistance, low carbon content, and suitability for welded environments, this shield is ideal for critical systems operating under thermal stress and corrosive gas flow. For technical consultation, custom fabrication, or quotations, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are precision-fabricated protective components used to extend the life of boiler, superheater, and heat exchanger tubes exposed to extreme heat, flue gas erosion, scaling, and corrosive environments. These shields are installed on curved or straight sections of tubes, helping to prevent mechanical wear and oxidation damage while ensuring reliable performance in thermal power, petrochemical, and industrial heat recovery systems. The half-round structure offers a secure fit and easy installation, eliminating the need for system disassembly. SS 310 U Type Inner Half Round Tube Shield The SS 310 U Type Inner Half Round Tube Shield is made from high-temperature austenitic stainless steel grade 310, which contains elevated levels of chromium and nickel. This alloy provides excellent resistance to oxidation, scaling, and thermal fatigue at service temperatures up to 1100°C. The inner U-type configuration is specifically designed to shield the inner curvature of U-bend tubes, which are susceptible to accelerated degradation due to turbulence, corrosive combustion gases, and localized heat concentration. • Inner U Type Half Round Tube Shield – Covers the inside arc of U-bend tubes, offering robust protection against turbulent flow erosion, slag buildup, and high-temperature scaling. Ladhani Metal Corporation is a leading manufacturer, supplier, and exporter of SS 310 U Type Inner Half Round Tube Shields, offering custom-built solutions for high-temperature tube protection in demanding process and energy systems. Chemical Composition of SS 310 – Austenitic High-Temperature Stainless Steel • Carbon (C): ≤ 0.25% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.50% • Chromium (Cr): 24.0 – 26.0% • Nickel (Ni): 19.0 – 22.0% • Iron (Fe): Balance Applications: Ideal for high-temperature and oxidizing environments such as boilers, reformers, kilns, and heat exchangers where scaling, corrosion, and thermal stress are prevalent. Uses • Installed on inner arcs of U-bend tubes in power plant superheaters and reheaters exposed to extreme temperatures • Applied in return bends of steam reformers and heat exchangers handling oxidizing and acidic gases • Shields inner curves in waste heat recovery boilers (WHRBs) and heat recovery steam generators (HRSGs) • Used in chemical process units, incinerators, and high-temperature furnace systems • Suitable for curved tube coils in metallurgical, cement, and process gas heating applications Features • Excellent oxidation resistance – Performs at temperatures up to 1100°C without significant scaling • Inner arc protection – Guards against erosion and heat damage caused by turbulent flue gas flow • High structural stability – Maintains strength and surface integrity under thermal cycling and load conditions • Precision fit – Custom-engineered to match tube diameter and bend radius for secure, long-lasting placement • Easy installation – Can be attached using stainless bands, clamps, or tack welding methods • Extended service life – Minimizes tube replacement and reduces maintenance frequency in high-heat systems Applications • thermal and power plants – Protects U-bend tubes in superheaters from flame impingement and slag attack • petrochemical industries – Shields return bends in reformers and exchangers from high-temperature gas streams • waste heat recovery – Used in WHRBs and HRSGs to defend tube bends from scaling and erosion • high-temperature process plants – Provides inner arc coverage in systems handling oxidizing combustion byproducts • furnace systems – Installed in curved tube coils subjected to high radiant heat and thermal cycling Conclusion The SS 310 U Type Inner Half Round Tube Shield by Ladhani Metal Corporation – manufacturer, supplier, and exporter – is a high-performance shielding solution for protecting the inner bend of tubes operating under intense heat and oxidation stress. Designed for precise fitment and long-term durability, this shield is ideal for boilers, reformers, and heat exchangers in power generation, petrochemical, and industrial heating systems. For technical consultation, custom orders, or quotations, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are precision-engineered components used to protect boiler and heat exchanger tubes from erosion, scaling, and high-temperature corrosion. These shields are widely applied in industrial systems exposed to thermal cycling, aggressive gases, and particulate flow. Their half-round shape allows for simple and secure installation over straight or curved tube surfaces, extending tube life and reducing maintenance needs. SS 316L U Type Outer Half Round Tube Shield The SS 316L U Type Outer Half Round Tube Shield is manufactured from SS 316L, a low-carbon molybdenum-bearing austenitic stainless steel known for its superior corrosion resistance and excellent weldability. This outer U-type configuration is designed to protect the external arc of U-bend tubes in boilers, superheaters, heat exchangers, and waste heat recovery systems. The low carbon content of SS 316L reduces the risk of sensitization and intergranular corrosion, making it ideal for welded systems exposed to chlorides, acidic gases, and steam. • Outer U Type Half Round Tube Shield – Offers full coverage to the outer curvature of U-bend tubes, shielding against erosion, slag buildup, high-temperature oxidation, and chemical attack. Ladhani Metal Corporation is a leading manufacturer, supplier, and exporter of SS 316L U Type Outer Half Round Tube Shields, delivering precision-built, long-lasting solutions for demanding industrial applications. Chemical Composition of SS 316L – Low-Carbon Austenitic Stainless Steel • Carbon (C): ≤ 0.03% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 16.0 – 18.0% • Nickel (Ni): 10.0 – 14.0% • Molybdenum (Mo): 2.0 – 3.0% • Iron (Fe): Balance Applications: Suited for high-temperature and corrosive environments requiring superior resistance to chlorides, acids, and weld-induced corrosion. Uses • Protection of U-bend outer arcs in superheaters and reheaters in thermal and nuclear power stations • Shielding tube bends in chemical heat exchangers and steam reformers exposed to chlorides and acidic gases • Outer bend coverage for WHRB and HRSG tubes subjected to flue gas flow, scaling, and erosion • Applied to return bends in condensers and evaporators in marine and coastal facilities • Ideal for pharmaceutical, food processing, and clean energy systems requiring low carbon stainless steel Features • Exceptional corrosion resistance – Molybdenum addition enhances resistance to pitting, crevice corrosion, and chlorides • Low carbon content – Minimizes the risk of sensitization and intergranular corrosion after welding or high-heat exposure • High-temperature capability – Maintains performance under cyclic heating and thermal stress conditions • Precision fitment – Custom-fabricated to match tube diameter and radius, ensuring tight, vibration-free installation • Easy installation – Mountable with clamps, banding, or tack welds without requiring shutdown or disassembly • Long-term durability – Withstands corrosive gases, scaling, and erosion, extending tube life and reducing downtime Applications • thermal power plants – Protects outer arcs of U-bend tubes from flue gas erosion and scaling in high-temperature zones • chemical and petrochemical plants – Shields return bends in reformers and exchangers operating with corrosive process media • waste heat recovery systems – Provides protection in WHRBs and HRSGs from thermal fatigue and particulate-laden flue gases • marine and offshore facilities – Suitable for chloride-rich environments such as desalination plants and coastal condensers • process and pharmaceutical industries – Ensures corrosion-resistant performance in systems with stringent cleanliness and durability requirements Conclusion The SS 316L U Type Outer Half Round Tube Shield by Ladhani Metal Corporation—manufacturer, supplier, and exporter—is a corrosion-resistant, precision-engineered solution for protecting U-bend tube outer surfaces in boilers and heat exchangers. Its low carbon content, molybdenum-enhanced alloy composition, and excellent weldability make it ideal for harsh industrial environments requiring high performance and reliability. Designed for easy installation and long service life, it is a trusted choice for power, petrochemical, marine, and process applications. For technical consultation, custom orders, or quotations, please contact Ladhani Metal Corporation.