'linings common applications'

DIN 2576 Carbon Steel Flanges PN 10 are slip-on type flanges manufactured in accordance with the DIN 2576 standard, suitable for piping systems operating under low to moderate pressures. Made from high-quality carbon steel, these flanges offer good mechanical strength and are cost-effective solutions for a wide range of industrial applications where corrosion resistance is not the primary concern. The slip-on design allows easy fitting over the pipe and facilitates welding on both the inner and outer edges, ensuring reliable and leak-proof connections. Ladhani Metal Corporation is a reputed manufacturer and global supplier of carbon steel flanges, delivering components that comply with international quality and dimensional standards. DIN 2576 carbon steel flanges are widely used in general-purpose piping systems across industries such as oil and gas, power generation, HVAC, water treatment, and process industries. Pressure Rating: • PN 10 (10 bar / 145 psi): Suitable for use in low to medium pressure systems with stable operational demands. Flange Types: • Slip-On Flanges These flanges slide over the pipe end and are welded on both sides, allowing for simple installation and strong mechanical joints. • Flat Face (FF) Flanges Designed to mate with flat gaskets and flat surfaces, suitable for systems involving cast iron or non-metallic components. Carbon Steel Grades and Composition: Common Grades: • ASTM A105 (Forged Carbon Steel) • ASTM A516 Grade 70 (Pressure Vessel Quality Steel) • IS 2062 (Structural Carbon Steel) Typical Composition (ASTM A105): • Carbon (C): 0.35% max • Manganese (Mn): 0.60 – 1.05% • Phosphorus (P): 0.035% max • Sulfur (S): 0.040% max • Silicon (Si): 0.10 – 0.35% Applications: DIN 2576 carbon steel flanges are preferred in systems where high strength is required and the risk of corrosion is minimal or controlled through external protection (e.g., coatings or linings). Common applications include: • Oil and Gas Transmission Used in pipelines and flowlines where moderate pressures are involved. • Power Plants Suitable for steam, water, and air systems in thermal and hydroelectric power stations. • Water Treatment and Distribution Employed in clean water and wastewater systems, including pumping stations and storage tanks. • HVAC Systems Utilized in heating, ventilation, and air conditioning ducting and piping. • Chemical and Petrochemical Applied in non-corrosive fluid handling and auxiliary systems. • Structural and Fabrication Works Used in non-pressure retaining structural supports and frames. Key Features: • Manufactured to DIN 2576 standards • PN 10 pressure rating for medium-duty applications • Cost-effective and mechanically strong • Available in a variety of carbon steel grades • Slip-on design offers ease of installation and alignment • Flat face design compatible with flat gaskets and soft materials • Ideal for industrial sectors with controlled or minimal corrosion environments • Custom drilling, dimensions, and surface treatments available Conclusion: DIN 2576 Carbon Steel Flanges PN 10 by Ladhani Metal Corporation offer a practical and economical solution for low to moderate pressure piping systems. With reliable performance, ease of installation, and availability in various carbon steel grades, these flanges are suited for a broad range of applications in power, water, oil and gas, and infrastructure industries. For detailed specifications, material compatibility, or project-based orders, contact Ladhani Metal Corporation today.

DIN 2567 duplex flanges PN 25 and PN 40 are high-performance threaded flanges manufactured according to DIN 2567 standards, specifically engineered for applications requiring superior strength, corrosion resistance, and long service life in aggressive environments. These flanges are ideal for medium to high-pressure systems and are widely used in industries such as oil & gas, petrochemicals, marine, and wastewater treatment. Ladhani Metal Corporation is a trusted manufacturer and global supplier of duplex flanges, offering precision-machined components designed to withstand stress, temperature fluctuations, and corrosive operating conditions. The threaded configuration enables quick, weld-free assembly, making them suitable for systems requiring routine inspection or maintenance. Pressure Ratings: • PN 25 (25 bar / 362 psi): Suitable for demanding fluid systems operating under moderate to high pressure. • PN 40 (40 bar / 580 psi): Built to handle high-pressure flow systems and aggressive environments, ensuring safety and durability under load. Flange Types: • Threaded (Screwed) Flanges Allow for easy connection and disassembly without welding; ideal for maintenance-accessible systems. • Raised Face (RF) Flanges Enhances gasket performance by focusing sealing pressure in a smaller contact area. • Flat Face (FF) Flanges Common in systems using brittle or non-metallic materials, especially in low-to-medium pressure operations. • Forged Threaded Flanges Deliver greater mechanical strength and improved dimensional accuracy. • Custom-Machined Flanges Offered in customized sizes, pressure classes, and duplex material grades to meet project-specific needs. Duplex Steel Grades and Composition: 1. Duplex 2205 (UNS S31803 / S32205) o Composition:  Chromium (Cr): 21.0 – 23.0%  Nickel (Ni): 4.5 – 6.5%  Molybdenum (Mo): 2.5 – 3.5%  Manganese (Mn): ≤ 2.0%  Nitrogen (N): 0.14 – 0.20%  Carbon (C): ≤ 0.03%  Silicon (Si): ≤ 1.0%  Iron (Fe): Balance Applications: Used in desalination plants, offshore platforms, heat exchangers, and pressure vessels due to its excellent chloride stress corrosion cracking resistance and high mechanical strength. Applications of DIN 2567 Duplex Flanges: • Oil & Gas Industry: Used in pipeline systems, separators, and subsea manifolds • Chemical and Petrochemical Plants: Withstand aggressive chemical exposure, including acids and chlorides • Desalination and Marine Engineering: Excellent performance in saltwater environments • Power Plants: Durable for use in high-pressure steam and cooling water systems • Wastewater Treatment: Corrosion-resistant in sludge, brine, and industrial effluent pipelines • Pulp and Paper Industry: Withstands acidic environments and mechanical abrasion Key Features: • Manufactured as per DIN 2567 standard • Available with PN 25 and PN 40 pressure ratings • High yield strength and stress corrosion cracking resistance • Superior resistance to pitting, crevice corrosion, and chloride-rich environments • Excellent mechanical and fatigue properties under both static and dynamic loading • Supplied with inspection certificates, testing reports, and full material traceability • Compatible with internal linings, coatings, or passivation treatments Conclusion: DIN 2567 duplex flanges PN 25 and PN 40 from Ladhani Metal Corporation are engineered for tough environments where standard stainless steel may fail. With their excellent strength, corrosion resistance, and long-term reliability, these flanges provide a safe and efficient connection solution for critical industrial systems. For detailed specifications, custom requirements, or bulk inquiries, reach out to Ladhani Metal Corporation today.

Standard: ASTM / ASME SB381 Material: Gr1, Gr2, Gr5, Gr7, Gr9, Gr12 Shape: Round or according to your requirements Technique: Forged, CNC Machined Quality Control: Ultrasonic Testing

ladhani metal corporation is supplier and exporter of PN 0H18N10T sheet , plate , coil , flat bar , circular plate , plate flanges , farma , laser cutting design sheet , waterjet cutting design sheet.PN 0H18N10T is the basic austenitic 18/8 steel stabilised by Titanium or additions. These grades are used because they are not sensitive to intergranular corrosion after heating within the carbide precipitation range of 425-850°C.PN 0H18N10T is the grade of choice for applications in the temperature range of up to about 900°C, combining high strength, resistance to scaling and phase stability with resistance to subsequent aqueous corrosion. Cold Bending : It has excellent cold working properties and cold bending can generally be carried out without too much difficulty. Hot Bending : Hot bending should be performed at 950oC - 1100Oc. Corrosion Resistance : it similar resistance to general corrosion in most media as 304, but not as good as 316. Stress Corrosion Cracking : it has similar resistance to stress corrosion cracking as 304, but not as good as 316. Pitting Corrosion / Crevice Corrosion : It has similar resistance to pitting and crevice corrosion as 304, but not as good as 316. Intergranular Corrosion : it has better resistance to intergranular corrosion than most of the standard 300 grades other than the low carbon types 304L, 316L and 317L due to its titanium content.N.B. Forging : Heat uniformly to 1150oC - 1200oC Machining: It is more difficult to machine than most of the standard austenitic stainless steels, due to its titanium addition. Our Domestic reach is unlimited and we supply to this following cities Ahmedabad, Amritsar, Aurangabad, Bangalore, Bhopal, Chandigarh, Chennai, Coimbatore, Dhanbad, Faridabad, Ghaziabad, Guwahati, Gwalior, Howrah, Hyderabad, Indore, Jabalpur, Jaipur, Jodhpur, Kanpur, Kolkata, Kota, Lucknow, Ludhiana, Madurai, Meerut, Mumbai, Nagpur, Nashik, Navi Mumbai, New Delhi, Patna, Pune, Raipur, Rajkot, Ranchi, Solapur, Srinagar, Surat, Thane, Vadodara, Varanasi, Vijayawada, Visakhapatnam, Hubballi, Tiruchirappalli, Bareilly, Moradabad, Mysore, Gurgaon, Aligarh, Jalandhar, Bhubaneswar We export to following Countries: Russia, Canada, United States, China, Brazil, Australia, Argentina, Kazakhstan, Algeria, Denmark, Saudi Arabia, Mexico, Indonesia, Iran, Mongolia, Peru, South Africa, Colombia, Ethiopia, Bolivia, Egypt, Venezuela, Turkey, Chile, Myanmar, France, Ukraine, Madagascar, Botswana, Kenya, Thailand, Spain, Sweden, Uzbekistan, Morocco, Paraguay, Zimbabwe, Norway, Japan, Germany, Republic of the Congo, Finland, Vietnam, Malaysia, Poland, Oman, Italy, Philippines, Ecuador, New Zealand, United Kingdom, Guinea, Uganda, Nepal, Bangladesh

Ladhani Metal Corporation offers SS Insulated Pipe Shoe Clamps designed to support and secure pipelines while maintaining thermal insulation integrity. These clamps are specially engineered with insulation material between the pipe and the shoe, ensuring minimal heat transfer and preventing energy loss in high-temperature or cryogenic applications. Manufactured from high-quality stainless steel, our insulated pipe shoe clamps combine durability, corrosion resistance, and reliable performance in demanding process environments. Function of SS Insulated Pipe Shoe Clamps • Provide stable pipe support while maintaining insulation continuity • Prevent thermal bridges and reduce energy loss in piping systems • Isolate pipes from supporting structures to minimize heat transfer • Distribute loads evenly, reducing stress on pipelines and insulation • Enhance operational efficiency and protect pipeline coatings Ladhani Metal Corporation manufactures, supplies, and exports SS Insulated Pipe Shoe Clamps in different sizes and designs to meet diverse project requirements across domestic and international markets. Available Grades • SS 304 • SS 304L • SS 316 • SS 316L Applications Commonly used in industries where maintaining insulation and preventing heat loss or gain is critical. • Refineries and petrochemical plants • Cryogenic and LNG facilities • Fertilizer and chemical processing units • Power generation plants and boilers • Marine and offshore engineering projects Uses • Provides insulated support for process pipelines in hot and cold service • Prevents damage to insulation during thermal expansion and movement • Improves efficiency by maintaining process temperature control • Protects against corrosion under insulation (CUI) • Suitable for heavy-duty and high-temperature pipeline systems Features • Integrated insulation design to reduce heat transfer • High load-bearing capacity and durable construction • Resistance to corrosion and oxidation in aggressive environments • Long service life with minimal maintenance requirements • Manufactured in SS 304, 304L, 316, and 316L grades Conclusion The SS Insulated Pipe Shoe Clamp from Ladhani Metal Corporation is a reliable solution for maintaining insulation performance and structural integrity in pipeline systems. Manufactured in SS 304, SS 304L, SS 316, and SS 316L grades, these clamps provide dependable service in industries requiring thermal efficiency, durability, and corrosion resistance. For inquiries or project requirements, contact Ladhani Metal Corporation #Mumbai #Delhi #Bangalore #Hyderabad #Chennai #Kolkata #Pune #Ahmedabad #Surat #Vadodara #Rajkot #Nagpur #Indore #Bhopal #Jaipur #Lucknow #Kanpur #Patna #Ranchi #Jamshedpur #Bhubaneswar #Raipur #Visakhapatnam #Vijayawada #Coimbatore #Madurai #Kochi #Trivandrum #Tiruchirappalli #Mangalore #Mysore #Noida #Gurgaon #Faridabad #Ghaziabad #Ludhiana #Amritsar #Chandigarh #Jalandhar #Agra #Varanasi #Meerut #Aurangabad #Nashik #Solapur #Gwalior #Allahabad #Guwahati #Shillong #PipeShoeClamp #StainlessSteelPipeShoeClamp #SSPipeShoeClamp #PipeShoeClampManufacturer #PipeShoeClampSupplier #PipeShoeClampExporter #PipeShoeClampIndia #IndustrialPipeShoeClamp #HeavyDutyPipeShoeClamp #CustomPipeShoeClamp #HighQualityPipeShoeClamp #304PipeShoeClamp #316PipeShoeClamp #304LPipeShoeClamp #316LPipeShoeClamp #PipeShoeClampFittings #PipeShoeClampSupport #SS304PipeShoeClamp #SS316PipeShoeClamp #SS316LPipeShoeClamp #SS304LPipeShoeClamp #PipeShoeClampDesign #PipeShoeClampApplication #PipeShoeClampForBoilers #PipeShoeClampForRefinery #PipeShoeClampForPetrochemical #PipeShoeClampForPowerPlant #PipeShoeClampForOilAndGas #PipeShoeClampForChemicalPlant #PipeShoeClampSolutions #PipeShoeClampProducts #PipeShoeClampFabrication #PipeShoeClampInstallation #PipeShoeClampSupportSystem #PipeShoeClampAssembly #PipeShoeClampHardware #PipeShoeClampTechnology #DurablePipeShoeClamp #ReliablePipeShoeClamp #PipeShoeClampStockist #PipeShoeClampWholesale #PipeShoeClampTrading #PipeShoeClampDistribution #PipeShoeClampExports #PipeShoeClampWorldwide #PipeShoeClampIndustry #PipeShoeClampMarket #PipeShoeClampOnline #PipeShoeClampComponents #PipeShoeClampSystems

Ladhani Metal Corporation offers SS Insulated Pipe Shoe Clamps designed to support and secure pipelines while maintaining thermal insulation integrity. These clamps are specially engineered with insulation material between the pipe and the shoe, ensuring minimal heat transfer and preventing energy loss in high-temperature or cryogenic applications. Manufactured from high-quality stainless steel, our insulated pipe shoe clamps combine durability, corrosion resistance, and reliable performance in demanding process environments. Function of SS Insulated Pipe Shoe Clamps • Provide stable pipe support while maintaining insulation continuity • Prevent thermal bridges and reduce energy loss in piping systems • Isolate pipes from supporting structures to minimize heat transfer • Distribute loads evenly, reducing stress on pipelines and insulation • Enhance operational efficiency and protect pipeline coatings Ladhani Metal Corporation manufactures, supplies, and exports SS Insulated Pipe Shoe Clamps in different sizes and designs to meet diverse project requirements across domestic and international markets. Available Grades • SS 304 • SS 304L • SS 316 • SS 316L Applications Commonly used in industries where maintaining insulation and preventing heat loss or gain is critical. • Refineries and petrochemical plants • Cryogenic and LNG facilities • Fertilizer and chemical processing units • Power generation plants and boilers • Marine and offshore engineering projects Uses • Provides insulated support for process pipelines in hot and cold service • Prevents damage to insulation during thermal expansion and movement • Improves efficiency by maintaining process temperature control • Protects against corrosion under insulation (CUI) • Suitable for heavy-duty and high-temperature pipeline systems Features • Integrated insulation design to reduce heat transfer • High load-bearing capacity and durable construction • Resistance to corrosion and oxidation in aggressive environments • Long service life with minimal maintenance requirements • Manufactured in SS 304, 304L, 316, and 316L grades Conclusion The SS Insulated Pipe Shoe Clamp from Ladhani Metal Corporation is a reliable solution for maintaining insulation performance and structural integrity in pipeline systems. Manufactured in SS 304, SS 304L, SS 316, and SS 316L grades, these clamps provide dependable service in industries requiring thermal efficiency, durability, and corrosion resistance. For inquiries or project requirements, contact Ladhani Metal Corporation #Mumbai #Delhi #Bangalore #Hyderabad #Chennai #Kolkata #Pune #Ahmedabad #Surat #Vadodara #Rajkot #Nagpur #Indore #Bhopal #Jaipur #Lucknow #Kanpur #Patna #Ranchi #Jamshedpur #Bhubaneswar #Raipur #Visakhapatnam #Vijayawada #Coimbatore #Madurai #Kochi #Trivandrum #Tiruchirappalli #Mangalore #Mysore #Noida #Gurgaon #Faridabad #Ghaziabad #Ludhiana #Amritsar #Chandigarh #Jalandhar #Agra #Varanasi #Meerut #Aurangabad #Nashik #Solapur #Gwalior #Allahabad #Guwahati #Shillong #PipeShoeClamp #StainlessSteelPipeShoeClamp #SSPipeShoeClamp #PipeShoeClampManufacturer #PipeShoeClampSupplier #PipeShoeClampExporter #PipeShoeClampIndia #IndustrialPipeShoeClamp #HeavyDutyPipeShoeClamp #CustomPipeShoeClamp #HighQualityPipeShoeClamp #304PipeShoeClamp #316PipeShoeClamp #304LPipeShoeClamp #316LPipeShoeClamp #PipeShoeClampFittings #PipeShoeClampSupport #SS304PipeShoeClamp #SS316PipeShoeClamp #SS316LPipeShoeClamp #SS304LPipeShoeClamp #PipeShoeClampDesign #PipeShoeClampApplication #PipeShoeClampForBoilers #PipeShoeClampForRefinery #PipeShoeClampForPetrochemical #PipeShoeClampForPowerPlant #PipeShoeClampForOilAndGas #PipeShoeClampForChemicalPlant #PipeShoeClampSolutions #PipeShoeClampProducts #PipeShoeClampFabrication #PipeShoeClampInstallation #PipeShoeClampSupportSystem #PipeShoeClampAssembly #PipeShoeClampHardware #PipeShoeClampTechnology #DurablePipeShoeClamp #ReliablePipeShoeClamp #PipeShoeClampStockist #PipeShoeClampWholesale #PipeShoeClampTrading #PipeShoeClampDistribution #PipeShoeClampExports #PipeShoeClampWorldwide #PipeShoeClampIndustry #PipeShoeClampMarket #PipeShoeClampOnline #PipeShoeClampComponents #PipeShoeClampSystems

Ladhani Metal Corporation offers SS Insulated Pipe Shoe Clamps designed to support and secure pipelines while maintaining thermal insulation integrity. These clamps are specially engineered with insulation material between the pipe and the shoe, ensuring minimal heat transfer and preventing energy loss in high-temperature or cryogenic applications. Manufactured from high-quality stainless steel, our insulated pipe shoe clamps combine durability, corrosion resistance, and reliable performance in demanding process environments. Function of SS Insulated Pipe Shoe Clamps • Provide stable pipe support while maintaining insulation continuity • Prevent thermal bridges and reduce energy loss in piping systems • Isolate pipes from supporting structures to minimize heat transfer • Distribute loads evenly, reducing stress on pipelines and insulation • Enhance operational efficiency and protect pipeline coatings Ladhani Metal Corporation manufactures, supplies, and exports SS Insulated Pipe Shoe Clamps in different sizes and designs to meet diverse project requirements across domestic and international markets. Available Grades • SS 304 • SS 304L • SS 316 • SS 316L Applications Commonly used in industries where maintaining insulation and preventing heat loss or gain is critical. • Refineries and petrochemical plants • Cryogenic and LNG facilities • Fertilizer and chemical processing units • Power generation plants and boilers • Marine and offshore engineering projects Uses • Provides insulated support for process pipelines in hot and cold service • Prevents damage to insulation during thermal expansion and movement • Improves efficiency by maintaining process temperature control • Protects against corrosion under insulation (CUI) • Suitable for heavy-duty and high-temperature pipeline systems Features • Integrated insulation design to reduce heat transfer • High load-bearing capacity and durable construction • Resistance to corrosion and oxidation in aggressive environments • Long service life with minimal maintenance requirements • Manufactured in SS 304, 304L, 316, and 316L grades Conclusion The SS Insulated Pipe Shoe Clamp from Ladhani Metal Corporation is a reliable solution for maintaining insulation performance and structural integrity in pipeline systems. Manufactured in SS 304, SS 304L, SS 316, and SS 316L grades, these clamps provide dependable service in industries requiring thermal efficiency, durability, and corrosion resistance. For inquiries or project requirements, contact Ladhani Metal Corporation #Mumbai #Delhi #Bangalore #Hyderabad #Chennai #Kolkata #Pune #Ahmedabad #Surat #Vadodara #Rajkot #Nagpur #Indore #Bhopal #Jaipur #Lucknow #Kanpur #Patna #Ranchi #Jamshedpur #Bhubaneswar #Raipur #Visakhapatnam #Vijayawada #Coimbatore #Madurai #Kochi #Trivandrum #Tiruchirappalli #Mangalore #Mysore #Noida #Gurgaon #Faridabad #Ghaziabad #Ludhiana #Amritsar #Chandigarh #Jalandhar #Agra #Varanasi #Meerut #Aurangabad #Nashik #Solapur #Gwalior #Allahabad #Guwahati #Shillong #PipeShoeClamp #StainlessSteelPipeShoeClamp #SSPipeShoeClamp #PipeShoeClampManufacturer #PipeShoeClampSupplier #PipeShoeClampExporter #PipeShoeClampIndia #IndustrialPipeShoeClamp #HeavyDutyPipeShoeClamp #CustomPipeShoeClamp #HighQualityPipeShoeClamp #304PipeShoeClamp #316PipeShoeClamp #304LPipeShoeClamp #316LPipeShoeClamp #PipeShoeClampFittings #PipeShoeClampSupport #SS304PipeShoeClamp #SS316PipeShoeClamp #SS316LPipeShoeClamp #SS304LPipeShoeClamp #PipeShoeClampDesign #PipeShoeClampApplication #PipeShoeClampForBoilers #PipeShoeClampForRefinery #PipeShoeClampForPetrochemical #PipeShoeClampForPowerPlant #PipeShoeClampForOilAndGas #PipeShoeClampForChemicalPlant #PipeShoeClampSolutions #PipeShoeClampProducts #PipeShoeClampFabrication #PipeShoeClampInstallation #PipeShoeClampSupportSystem #PipeShoeClampAssembly #PipeShoeClampHardware #PipeShoeClampTechnology #DurablePipeShoeClamp #ReliablePipeShoeClamp #PipeShoeClampStockist #PipeShoeClampWholesale #PipeShoeClampTrading #PipeShoeClampDistribution #PipeShoeClampExports #PipeShoeClampWorldwide #PipeShoeClampIndustry #PipeShoeClampMarket #PipeShoeClampOnline #PipeShoeClampComponents #PipeShoeClampSystems

Ladhani Metal Corporation offers Half Round Wedge Wire (WW) Tube Shields designed for protecting boiler tubes against severe erosion, corrosion, and high-velocity flue gas impact in power plants, refineries, petrochemical heaters, waste heat recovery boilers (WHRBs), and heat recovery steam generators (HRSGs). Unlike standard shields, these tube shields feature a wedge wire surface that enhances resistance to abrasive ash particles, improves gas flow dynamics, and reduces localized turbulence, making them ideal for high-erosion environments. Function of WW Tube Shields • Protect boiler tubes from accelerated wear in flue gas zones • Minimize erosion caused by abrasive fly ash and soot blower jets • Improve gas flow distribution by reducing turbulence • Extend tube service life and reduce frequency of replacement Ladhani Metal Corporation manufactures, supplies, and exports Half Round Wedge Wire Tube Shields in standard and customized dimensions to meet diverse industrial and international project requirements. Available Grades • SS 304 / SS 304L • SS 310 / SS 310S • SS 316 / SS 316L • SS 410 / SS 420 / SS 430 • 1Cr13 • 1Cr18Ni9Ti • 1Cr20Ni14Si2 • 1Cr25Ni20Si2 • Cr23Ni13 • Cr25Ni20 Applications: Commonly used in high-dust and erosive sections of boilers including LTSH, economizers, superheaters, and reheaters in thermal power plants, HRSGs, WHRBs, and refinery process heaters. Uses • Protection against flue gas erosion in high-dust zones • Shields superheater, reheater, and economizer tubes from abrasive particles • Reduces damage from soot blower impact • Enhances overall boiler efficiency and tube longevity Features • Wedge wire surface provides superior erosion resistance • Excellent high-temperature oxidation and corrosion resistance • Strong mechanical strength for high-pressure and high-heat environments • Precision-engineered for accurate fit and easy installation Applications • Power generation boilers – Superheater and reheater tube protection • HRSGs and WHRBs – Long-lasting shielding in dust-laden gas streams • Refinery and petrochemical heaters – Reliable under continuous high heat cycles • Industrial steam boilers – Cost-effective tube protection solution Conclusion The Half Round Wedge Wire (WW) Tube Shield by Ladhani Metal Corporation is a robust and advanced solution for boiler tube protection in high-erosion environments. With availability in stainless steel and heat-resistant alloys, these shields deliver durability, precision fit, and long-term reliability, meeting the demanding needs of global energy and process industries.

Ladhani Metal Corporation manufactures and exports SS Half Round Shields for LTSH (Low Temperature Superheater) Tubes, Type-IV, designed to protect boiler tubes against erosion, oxidation, and abrasive wear. LTSH tubes in Type-IV sections operate in the convection pass of boilers, where flue gas velocities and ash particles cause surface thinning and premature failure. These shields are precision-engineered to provide extended protection and ensure long service life of superheater tubes in power generation and industrial boilers. Function of LTSH Tubes • Carry steam through the low-temperature superheater section of the boiler • Exposed to erosive flue gases, abrasive fly ash, and soot blower impacts • Protected with Half Round Shields to reduce erosion, oxidation, and tube maintenance Ladhani Metal Corporation manufactures, supplies, and exports SS Half Round Shields for LTSH, Type-IV, in various lengths, diameters, and thicknesses, catering to both domestic and international power plant applications. Available Grades • SS 304 / SS 304L • SS 310 / SS 310S • SS 316 / SS 316L • SS 410 / SS 420 / SS 430 • 1Cr13 • 1Cr18Ni9Ti • 1Cr20Ni14Si2 • 1Cr25Ni20Si2 • Cr23Ni13 • Cr25Ni20 Applications: Suitable for LTSH tube protection in thermal power plants, industrial boilers, WHRBs (Waste Heat Recovery Boilers), and HRSGs (Heat Recovery Steam Generators). Uses • Shields LTSH tubes from erosion caused by ash-laden flue gases • Protects against oxidation and scaling in high-temperature zones • Extends tube service life and reduces frequent shutdowns • Commonly used in WHRBs, HRSGs, process boilers, and industrial steam systems Features • Excellent resistance to erosion, oxidation, and corrosion • High mechanical stability in elevated temperature operations • Precision-engineered design for accurate Type-IV fitment • Available in stainless steel and high-performance alloy grades Applications • Power generation boilers – Reliable tube protection in LTSH sections • Waste heat recovery boilers – Guards tubes against abrasive particle erosion • Heat recovery steam generators – Ensures durability in cyclic temperature operations • Industrial boilers – Effective shielding in harsh flue gas conditions Conclusion The SS Half Round Shield for LTSH, Type-IV, from Ladhani Metal Corporation offers durable and cost-effective protection for boiler tubes exposed to erosive and oxidizing conditions. Available in stainless steel grades SS 304/304L, SS 310/310S, SS 316/316L, SS 410/420/430, and special alloys including 1Cr13, 1Cr18Ni9Ti, 1Cr20Ni14Si2, 1Cr25Ni20Si2, Cr23Ni13, and Cr25Ni20, these shields are engineered for long-lasting performance and export-ready supply. For specifications and orders, contact Ladhani Metal Corporation. #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Muzaffarpur#halftubeshield #utypehalftubeshield #tubeshieldexporter #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier #SSShielding #IndustrialTubeShield #BoilerTubeGuard #CustomMetalParts #SteelIndustryIndia #MetalEngineering #HeavyIndustrySupply #StainlessSteelIndia #SteelExporters #MetalComponentExport #FabricatedProducts #SteelDealer #IndustrialSupplyIndia #BoilerTubeFittings #TubeShieldingSolutions #HalfTubeCover #HeatExchangerShield #HalfRoundReheaterShield #ReheaterTubeShield #BoilerReheaterProtection #PowerPlantTubeShield #BoilerErosionShield #SteamBoilerTubeShield #HighTempTubeShield #BoilerWearProtection