'intermittent high temperatures'

Half Round Tube Shield Ladhani Metal Corporation manufactures SS 430 Half Round Straight Tube Shields to provide cost-effective protection for straight boiler and heat exchanger tubes in mildly corrosive and oxidizing environments. SS 430 is a ferritic stainless steel known for its good resistance to oxidation, thermal fatigue, and moderate corrosion in non-aggressive media. These shields are ideal for shielding tubes exposed to dry flue gases, ash, and scale buildup. SS 430 Half Round Straight Tube Shield The SS 430 Half Round Straight Tube Shield is designed to fit snugly over the exterior surface of straight tubes, forming a physical barrier that resists thermal cycling, soot-blowing erosion, and mechanical wear. With its high chromium content, SS 430 provides enhanced resistance to scaling at elevated temperatures. It is commonly used in power plants, economizers, WHRBs, and industrial boilers where consistent performance and affordability are important. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of SS 430 Half Round Straight Tube Shields, offering practical shielding solutions to extend the life of tubes in thermal and process equipment. Material Grade SS 430 – Ferritic stainless steel with good oxidation resistance and moderate corrosion protection in non-chloride environments. Chemical Composition of SS 430 • Carbon (C): ≤ 0.12% • Manganese (Mn): ≤ 1.00% • Phosphorus (P): ≤ 0.040% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 16.0 – 18.0% • Iron (Fe): Balance Applications: Suitable for dry, clean flue gas zones and mildly corrosive environments with minimal exposure to chlorides or strong acids. Uses • Straight tube shielding in boiler flue gas paths • Protection in economizers and preheater sections • Used in WHRBs for dry particulate erosion prevention • Ideal for food, paper, and textile industries with clean gas flow • Applied in low-to-moderate temperature furnace and duct systems Features • Good oxidation resistance – Performs well in clean, dry heat environments • Cost-efficient – Affordable solution for basic erosion protection • Magnetic ferritic grade – Offers dimensional stability under temperature cycling • Resistant to scaling – Up to ~815°C in intermittent service • Customizable – Lengths, radius, and thickness tailored to project needs • Easy attachment – Suitable for weld-on, clamp-on, or banded installation Applications • thermal boilers – Low-cost shielding for tubes in flue passages • process heat exchangers – Protects tubes in moderately aggressive environments • industrial dryers and ovens – Used in clean-air heating systems • WHRBs – Economical shield in clean-burning furnaces • general steam systems – Prevents tube wear and extends service life Conclusion SS 430 Half Round Straight Tube Shields by Ladhani Metal Corporation are a durable and economical choice for protecting straight tubes from heat, scale, and dry flue gas abrasion. With its balance of thermal resistance and cost-effectiveness, it serves reliably across a wide range of industrial systems. For custom configurations and bulk orders, contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are precision-engineered components used to protect boiler and heat exchanger tubes from erosion, scaling, and high-temperature corrosion. These shields are widely applied in industrial systems exposed to thermal cycling, aggressive gases, and particulate flow. Their half-round shape allows for simple and secure installation over straight or curved tube surfaces, extending tube life and reducing maintenance needs. 1Cr13 U Type Half Round Tube Shield The 1Cr13 U Type Half Round Tube Shield is fabricated from 1Cr13, a martensitic stainless steel known for its excellent hardness, wear resistance, and moderate corrosion resistance. This U-type shield is ideal for protecting U-bend tube sections in systems where mechanical wear, steam erosion, and intermittent high temperatures are a concern. The U-shaped design offers precise coverage of both the inner and outer arcs of tube bends, especially in boiler coils, superheaters, and heat exchangers where localized wear and thermal impact are concentrated. • Outer U Type Half Round Tube Shield – Shields the outer curvature of the U-bend from gas flow abrasion, impact from slag particles, and heat-induced surface degradation. • Inner U Type Half Round Tube Shield – Protects the inner radius against turbulence-induced erosion, scaling, and mechanical fatigue. Ladhani Metal Corporation supplies 1Cr13 U Type Half Round Tube Shields for industrial applications where strength, hardness, and moderate corrosion protection are required at an economical cost. Chemical Composition of 1Cr13 – Martensitic Stainless Steel • Carbon (C): 0.15 – 0.20% • Manganese (Mn): ≤ 1.00% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 12.0 – 14.0% • Nickel (Ni): ≤ 0.60% • Iron (Fe): Balance Applications: Well-suited for mildly corrosive and abrasive environments involving steam, flue gases, or mechanical impact at moderate to high temperatures. Uses • Protection of U-bend tubes in superheaters, reheaters, and boiler coils • Shielding curved tubes in industrial furnaces, economizers, and condensers • Coverage for return bends in WHRBs and HRSGs subject to mechanical and thermal wear • Application in process gas heaters and utility boilers in petrochemical and power sectors • Ideal for systems where hardness and erosion resistance are more critical than high corrosion resistance Features • Good oxidation and scaling resistance – Chromium content offers adequate protection in dry, high-temperature environments. • High mechanical strength – Martensitic structure provides superior wear resistance and hardness, reducing erosion damage in turbulent flow areas. • Dual-bend protection – Available in both inner and outer U-type configurations for complete shielding of tube bends. • Custom fitment – Precisely manufactured to match specific tube radii and diameters, ensuring stable and secure installation. • Fast installation – Easily attached using clamps, banding, or tack welding without requiring system disassembly. • Economical solution – Provides effective protection in harsh environments with a cost-efficient stainless steel alloy. Applications • thermal power plants – Used on U-bend tubes in superheaters and reheaters where flue gas erosion and steam wear are present. Enhances system life and performance. • waste heat recovery boilers – Shields tube bends in WHRBs from slag, scale, and high-velocity gas streams, improving long-term reliability. • petrochemical industries – Suitable for curved tubes in heaters, exchangers, and gas furnaces exposed to heat and particulate flow. • general industrial boilers – Applied to return bends in utility boilers and process heaters for erosion and oxidation control. • chemical and refining sectors – Ideal for non-aggressive environments requiring mechanical protection more than extreme corrosion resistance. Conclusion The 1Cr13 U Type Half Round Tube Shield by Ladhani Metal Corporation offers strong mechanical protection and moderate corrosion resistance for U-bend tube sections in boilers, heat exchangers, and industrial heating systems. Its martensitic stainless steel composition provides superior wear resistance, making it well-suited for environments with steam erosion, thermal stress, and mechanical impact. Designed for easy installation and long-term durability, this shield is a practical solution for a wide range of thermal and utility applications. For technical consultation, custom orders, or quotations, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are robust, precision-fabricated protective sleeves designed to guard the outer surfaces of tubes in boilers, heat exchangers, incinerators, and high-temperature processing equipment. Engineered to extend the service life of tubes exposed to corrosive gases, abrasive particulates, and elevated temperatures, these shields provide a reliable barrier against mechanical and chemical degradation. The half-round design facilitates easy installation while ensuring a secure, form-fitting layer of defense. 1Cr13 Half Round Tube Shield The 1Cr13 Half Round Tube Shield is a semi-cylindrical component manufactured from martensitic stainless steel containing approximately 13% chromium. Classified under the 1Cr13 grade, this alloy delivers good corrosion resistance, excellent wear performance, and moderate strength at elevated temperatures. It is especially suited for thermal environments that are not extremely oxidizing or carburizing but where erosion and mechanical wear are a concern. With a higher hardness potential through heat treatment and moderate thermal resistance, 1Cr13 shields are ideal for applications involving flue gas exposure, soot-laden atmospheres, and temperature cycling. The shield’s half-round configuration is precision-engineered for optimal tube coverage and long-term durability. It offers a balance of strength, corrosion resistance, and cost-effectiveness, making it suitable for a wide range of industrial processes. Chemical Composition of 1Cr13 – Martensitic Stainless Steel • Carbon (C): 0.15 – 0.20% • Silicon (Si): ≤ 1.00% • Manganese (Mn): ≤ 1.00% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.030% • Chromium (Cr): 12.0 – 14.0% • Nickel (Ni): ≤ 0.60% • Iron (Fe): Balance Uses • Boiler Tube Protection – Shields tube surfaces from flue gas erosion, ash particle abrasion, and soot buildup in economizers and waterwalls. • Heat Exchanger Tubes – Provides an extra layer of wear resistance in zones prone to mechanical stress and fluid turbulence. • Incinerator and Waste Heat Units – Guards tubes exposed to fluctuating temperatures, slag, and particulate deposits. • Cement Plant Piping – Protects tubing and ducts in kiln exhaust systems from abrasive dust and high flow velocity. • Air Preheaters and Recuperators – Enhances the durability of components subjected to temperature variations and corrosive gases. Features • Moderate Oxidation Resistance – Chromium content enables good performance in mildly oxidizing environments and intermittent exposure to high temperatures. • Wear and Abrasion Resistance – Martensitic structure offers high surface hardness and resistance to mechanical wear. • Heat Treatable – Can be hardened to increase durability and resistance to deformation. • Cost-Effective – Provides a lower-cost alternative to austenitic and superalloy shields for moderate service conditions. • High Dimensional Accuracy – Manufactured with tight tolerances to ensure secure fitment and uniform tube coverage. • Convenient Installation – Half-round shape enables quick mounting through welding or clamping techniques. • Versatile Finishing Options – Supplied with pickled or mechanically polished surfaces to improve corrosion resistance and adhesion. Applications • Power Generation – Used in economizer, preheater, and convection sections of boilers to prevent erosion and fouling. • Chemical and Fertilizer Plants – Protects exposed tube surfaces in systems with moderate chemical exposure. • Metallurgical Furnaces – Shields mechanical and flue components exposed to particulate movement and temperature cycling. • Pulp and Paper Industry – Used in recovery boilers and heat exchangers where corrosion resistance and mechanical strength are both required. • Petrochemical Plants – Applied in lower-temperature zones where scaling and erosion are primary concerns. Conclusion The 1Cr13 Half Round Tube Shield by Ladhani Metal Corporation provides an optimal solution for industrial tube protection in moderate temperature and corrosion environments. Its martensitic stainless steel composition ensures excellent wear resistance, good oxidation stability, and structural strength at a competitive cost. Designed for easy installation and reliable performance, these shields are ideal for various applications in power, process, and heat recovery systems. Custom-built to meet specific dimensions, material thicknesses, and finishing preferences, 1Cr13 tube shields offer dependable service life extension for critical heat transfer equipment. For technical specifications, pricing, or customization inquiries, please contact Ladhani Metal Corporation.

Product Name: Titanium Stud Bolts Standard: DIN938 DIN939 Material: Gr2 Gr5 Size: M3-M52 Surface: Polished

Product Name: CP Grade 1 Titanium Bar Standard: ASTM B348 Material: Gr1 Unit Price: $15usd/kg- $30usd/kg Shape: Round Diameter: 6-350mm Length: Max 6000mm Surface: Bright

Standard: DIN127 Material: Gr5 Size: M2-M52 Surface: Polished Gr5 Titanium Spring Lock Washer DIN127 Titanium spring lock washer is the most commonly used part to prevent assembly components from loosening. They apply greater bolt tension per unit of applied torque, and provide protection against loosening resulting from vibration and corrosion. Product Information of Gr5 Titanium Spring Lock Washer DIN127 Material: GR2 GR5 Standard: DIN127 Technique: CNC/Forged Surface: Polished Size: M2-M52 Titanium grade 5 is the commonly used titanium alloy that is accounting about 50% of usage throughout the globe. This material is covering 6% aluminum and 4% of vanadium. This material is a good combination of various properties like corrosion-resistant, lightweight, high strength. This alloy is stronger in addition to having thermal properties and stiffness. Among its advantages, this alloy is heat treatable. Also, this grade possesses good weldability and fabricability.

Product Name: titanium plate 4mm Standard: ASTM B265 Material: Gr1 Gr2 Gr5 Gr7 Gr12 Unit Price: $15usd/kg-$48usd/kg Thickness: 0.5-100mm Length: 500-6000mm Or As You Require Width: 500-1000mm Or As You Require Surface: Pickling, Polishing, Sand Blasting

LADHANI METAL CORPORATION We have been considered to be the premium manufacturer and supplier of the finest range of SS316L Stud Bolt. The products are precision engineered and are developed after much research to better match the customers' needs and preferences. Moreover the competitive pricing model adopted by the company has made the products more preferable in the market. We are a brand regularly applauded for offering high quality products. Features: Smooth surface finish Different shapes Easy to install High efficiency Sturdy construction Different sizes Specifications: Stainless Steel: ASTM A 182, A 240 Grade: F 304, 304L, 304H, 316, 316L, 316Ti, 310, 310S, 321, 321H, 317, 347, 347H,904L, Alloy 20 Duplex stainless steel UNS S31803, 2205, Super Duplex stainless steel UNS S32750 Carbon Steel: ASTM A 105, ASTM A 181 Alloy Steel: ASTM A 182, GR F1, F11, F22, F5, F9, F91 Nickel Alloys: Monel 400 & 500, Inconel 600 & 625, Incolloy 800, 825, Hastelloy C22,C276, Titanium Gr 2 & 5 Copper Alloys: Copper, Brass & Gunmetal,

LADHANI METAL CORPORATION We have been considered to be the premium manufacturer and supplier of the finest range of SS317L Stud Bolt. The products are precision engineered and are developed after much research to better match the customers' needs and preferences. Moreover the competitive pricing model adopted by the company has made the products more preferable in the market. We are a brand regularly applauded for offering high quality products. Features: Smooth surface finish Different shapes Easy to install High efficiency Sturdy construction Different sizes Specifications: Stainless Steel: ASTM A 182, A 240 Grade: F 304, 304L, 304H, 316, 316L, 316Ti, 310, 310S, 321, 321H, 317, 347, 347H,904L, Alloy 20 Duplex stainless steel UNS S31803, 2205, Super Duplex stainless steel UNS S32750 Carbon Steel: ASTM A 105, ASTM A 181 Alloy Steel: ASTM A 182, GR F1, F11, F22, F5, F9, F91 Nickel Alloys: Monel 400 & 500, Inconel 600 & 625, Incolloy 800, 825, Hastelloy C22,C276, Titanium Gr 2 & 5 Copper Alloys: Copper, Brass & Gunmetal,