'industrial sectors'

Ladhani Metal Corporation offers SS 316L Half Round Tube Shields designed to protect boiler tubes in thermal power plants, HRSGs, WHRBs, and industrial steam systems. Boiler tubes face severe service conditions such as high-temperature flue gas erosion, oxidation, and soot blower impact, which significantly reduce operational life. Manufactured from low-carbon molybdenum-bearing austenitic stainless steel grade SS 316L, these shields provide excellent corrosion resistance, superior scaling resistance, and improved weldability by minimizing the risk of carbide precipitation during welding. Function of Boiler Tubes • Carry water or steam through heating sections of the boiler • Continuously exposed to high-temperature flue gases, ash, and corrosive particles • Require Half Round Tube Shields in high-erosion, corrosive, and soot blower zones Ladhani Metal Corporation manufactures, supplies, and exports SS 316L Half Round Tube Shields in various lengths, diameters, and thicknesses to cater to both domestic and international requirements. SS 316L Grade Chemical Composition – Austenitic Stainless Steel • Carbon (C): ≤ 0.03% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 16.00 – 18.00% • Nickel (Ni): 10.00 – 14.00% • Molybdenum (Mo): 2.00 – 3.00% • Iron (Fe): Balance Applications: Suitable for superheater and reheater tubes in power generation boilers, petrochemical heaters, HRSGs, and waste heat recovery boilers operating in corrosive and high-temperature conditions. Uses • Protects boiler tubes from erosion, oxidation, and flue gas corrosion • Shields tubes against soot blower impact and abrasive ash particles • Extends service life of superheater and reheater components in steam circuits • Applicable in WHRBs, HRSGs, utility boilers, and process steam plants Features • Superior corrosion resistance in oxidizing and chloride-rich atmospheres • Low carbon content reduces sensitization and enhances weldability • Excellent resistance to pitting and crevice corrosion due to molybdenum content • Precision-engineered for exact tube curvature and easy installation Applications • Power generation boilers – Long-lasting protection for reheater and superheater tubes • Waste heat recovery boilers – Reliable against particle erosion and scaling • Industrial steam plants – Performs well under fluctuating high-temperature cycles • Petrochemical and chemical heaters – Ensures durability in corrosive environments Conclusion The SS 316L Half Round Tube Shield for Boiler Tubes by Ladhani Metal Corporation provides long-term, corrosion-resistant protection under demanding boiler conditions. With enhanced weldability, excellent pitting resistance, and reliable high-temperature stability, these shields extend tube service life and reduce maintenance needs. Available in a wide range of export-ready specifications, they are trusted solutions for global power, petrochemical, and industrial sectors. For supply and technical inquiries, contact Ladhani Metal Corporation.

Ladhani Metal Corporation offers SS 316 Half Round Tube Shields designed to protect boiler tubes in power plants, HRSGs, WHRBs, and industrial steam systems. Boiler tubes often face high-temperature flue gas erosion, oxidation, and soot blower impact, which can reduce their operational life. Manufactured from molybdenum-bearing austenitic stainless steel grade SS 316, these shields provide excellent resistance to pitting, crevice corrosion, and scaling in chloride-rich and corrosive boiler atmospheres, making them highly reliable for demanding service conditions. Function of Boiler Tubes • Carry water or steam through heating sections of the boiler • Continuously exposed to high-temperature flue gases, ash, and corrosive deposits • Require Half Round Tube Shields in high-erosion, soot blower, and corrosive zones Ladhani Metal Corporation manufactures, supplies, and exports SS 316 Half Round Tube Shields in customized lengths, diameters, and thicknesses to meet diverse industrial requirements worldwide. SS 316 Grade Chemical Composition – Austenitic Stainless Steel • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 16.00 – 18.00% • Nickel (Ni): 10.00 – 14.00% • Molybdenum (Mo): 2.00 – 3.00% • Iron (Fe): Balance Applications: Suitable for superheater and reheater tubes in thermal power stations, waste heat recovery boilers, HRSGs, petrochemical heaters, and steam plants exposed to corrosive flue gases and high operating temperatures. Uses • Protects boiler tubes against high-temperature corrosion and erosion • Shields tubes from soot blower and abrasive particle damage • Extends service life of boiler heating components in corrosive atmospheres • Widely used in WHRBs, HRSGs, and utility boilers requiring extra corrosion resistance Features • Superior resistance to corrosion and scaling in chloride-laden boiler environments • Enhanced pitting and crevice corrosion resistance due to molybdenum content • Excellent mechanical strength and stability at elevated temperatures • Manufactured for precise fit and easy installation Applications • Power generation boilers – Reliable protection for reheater and superheater tubes • Waste heat recovery boilers – Guards tubes against erosion and flue gas deposits • Industrial steam plants – Ensures longer life in corrosive and erosive atmospheres • Petrochemical process heaters – Ideal for chloride-rich and corrosive flue gas conditions Conclusion The SS 316 Half Round Tube Shield for Boiler Tubes by Ladhani Metal Corporation delivers reliable protection against erosion, scaling, and corrosive damage in harsh boiler environments. Designed with molybdenum-enhanced stainless steel, these shields ensure long service life, reduced maintenance, and superior resistance under severe operating conditions. Available in export-ready specifications, they are a trusted solution for global power, petrochemical, and industrial sectors. For supply and technical support, contact Ladhani Metal Corporation. #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Muzaffarpur#halftubeshield #utypehalftubeshield #tubeshieldexporter #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier #SSShielding #IndustrialTubeShield #BoilerTubeGuard #CustomMetalParts #SteelIndustryIndia #MetalEngineering #HeavyIndustrySupply #StainlessSteelIndia #SteelExporters #MetalComponentExport #FabricatedProducts #SteelDealer #IndustrialSupplyIndia #BoilerTubeFittings #TubeShieldingSolutions #HalfTubeCover #HeatExchangerShield #HalfRoundReheaterShield #ReheaterTubeShield #BoilerReheaterProtection #PowerPlantTubeShield #BoilerErosionShield

Product name:Grade 12 Titanium plate Unit price:$15.5-$36.9/kg Material: Titanium Grade 12 (Ti-0.3Mo-0.8Ni) Standard: ASTM/ASME B265 Demension: Thickness*1000*2000mm Thickness*3000*6000mm (Standard size); Thickness: 0.5mm; 0.8mm; 1.0mm; 1.2mm; 1.5mm; 2.0mm; 3.0mm; 4.0mm ......40mm etc br>Technique : Rolled Status: Annealed(M) GR12 is a titanium alloy containing molybdenum and nickel (Ti-0.3Mo-0.8Ni).Grade 12 titanium plate is high quality and weldability. It is a titanium alloy that has always been very durable, even at high temperatures. In addition, Grade 12 titanium plates have excellent corrosion resistance in reducing and oxidizing environments, and their heat resistance is better than that of pure titanium. Grade 12 titanium sheets generally have few scratches and are not easy to scratch. Product name:Grade 12 Titanium plate Material: Titanium Grade 12 (Ti-0.3Mo-0.8Ni) Standard: ASTM/ASME B265 Demension: Thickness*1000*2000mm Thickness*3000*6000mm (Standard size); Thickness: 0.5mm; 0.8mm; 1.0mm; 1.2mm; 1.5mm; 2.0mm; 3.0mm; 4.0mm ......40mm etc Technique : Rolled Status: Annealed(M) MTC: EN10204.3.1 certificate Applications : Petroleum ,chemical industry, Marine, medical Package:Standard export packaging, inside foam film and pearl cotton protection, outside fumigation-free plywood case. Grade 12 Titanium Plate Equivalent Grades: STANDARD WERKSTOFF NO. UNS Titanium Grade 12 3.7105 R53400 Titanium ASTM B265 Gr 12 Plate Chemical Composition: Fe O C H N Mo Ni ≤0.30 ≤0.18 ≤0.08 ≤0.015 ≤0.03 0.2 - 0.4 0.6 - 0.9 Titanium Grade 12 Plate Mechanical Properties: Material Tensile Strength min Yield Strength Elongation in 2" (%) ksi Mpa Max Min ksi Mpa Ksi Mpa Titanium CP Grade12Annealed Sheet 70 483 50 345 - - 18

Product Name: Titanium Blind Flange Standard: ASME B16.5 Material: Gr1 Gr2 Gr5 Gr7 Gr12 Unit Price: $25usd/pc-$85usd/pc Sealing Surface: RF, FF, TG, RJ etc. Size: NPS 1/2 - NPS 24(DN 10 - 2000) Pressure: 150#-2500# Surface: Polished Technique: Forged and CNC Machined Inspection: UT% PT% Certificate: ISO9001, TUV etc.

Ladhani Metal Corporation offers Cr25Ni20 Outer Half Round 90 Degree Bend Tube Shields engineered to safeguard the outer arc of U-bends and 90-degree curved tubes in high-temperature industrial systems such as boilers, heat exchangers, superheaters, and reheaters. The half-round shield is precision-formed to match the curvature of return tube bends, creating a robust physical barrier against erosive flue gas, particulate impact, and mechanical wear from soot blowing. Cr25Ni20 shields are especially suited for utility boilers, incinerators, petrochemical heaters, and waste heat recovery units operating under aggressive thermal and oxidizing conditions. Ladhani Metal Corporation is a reputed manufacturer, supplier, and exporter of Cr25Ni20 Outer Half Round 90 Degree Bend Tube Shields, offering customized configurations for optimal fit and performance. Cr25Ni20 Grade Chemical Composition – Austenitic Stainless Steel • Carbon (C): ≤ 0.10% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.50% • Chromium (Cr): 24.0 – 26.0% • Nickel (Ni): 19.0 – 22.0% • Iron (Fe): Balance Uses • Shields 90-degree return bends in radiant sections of superheaters and reheaters • Applied in HRSGs, waste heat boilers, and incinerators under severe temperature conditions • Guards against metal loss due to flue gas erosion and thermal cycling • Suitable for tube bends in high-temperature reformers, furnaces, and gas processing units Features • Outstanding heat resistance – Performs reliably at sustained temperatures above 1000°C • Excellent oxidation and scaling resistance – Protects metal surfaces in oxidizing and carburizing atmospheres • Long service life – High alloy content ensures resistance to metal fatigue and thermal stress • Tailored fit – Fabricated to match various tube bend radii and dimensions • Flexible installation – Can be clamped, tack welded, or banded based on site requirements • Wide availability – Offered in diverse lengths, wall thicknesses, and bend angles Applications • Power plants – Protects reheater and superheater tube bends in extreme heat zones • Waste incineration plants – Shields tubes from ash erosion and corrosive gas attack • Petrochemical and refinery sectors – Applied in high-temperature fired heaters and steam reformers • Metal and glass industries – Protects furnace coils and curved tubes from high-temperature damage Conclusion The Cr25Ni20 Outer Half Round 90 Degree Bend Tube Shield by Ladhani Metal Corporation offers superior protection for tube bends exposed to intense heat, oxidation, and thermal cycling. With high alloy stability and long-term performance in extreme environments, these shields are ideal for critical thermal processing systems. For custom dimensions, application-specific material advice, or product inquiries, contact Ladhani Metal Corporation. #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Salem #Erode #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Hassan #Cuttack #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Gaya #Muzaffarpur #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier #SSShielding #IndustrialTubeShield #BoilerTubeGuard #CustomMetalParts #SteelIndustryIndia #MetalEngineering #HeavyIndustrySupply #StainlessSteelIndia #SteelExporters #MetalComponentExport #FabricatedProducts #SteelDealer #IndustrialSupplyIndia #BoilerTubeFittings #TubeShieldingSolutions #HalfTubeCover #HeatExchangerShield #halftubeshield #utypehalftubeshield #tubeshieldexporter

Half Round Tube Shield Ladhani Metal Corporation manufactures precision-engineered Half Round Tube Shields to protect boiler and heat exchanger tubes from corrosion, erosion, and surface degradation. Designed for durability in aggressive environments, these shields are especially suited for thermal equipment where tubes are subjected to high flow velocities, abrasive particles, and flue gas turbulence. Their half-round shape allows easy installation while offering long-term protection and reduced maintenance. 1Cr20Ni14Si2 Half Round Tube Shield for LTSH Tube The 1Cr20Ni14Si2 Half Round Tube Shield is manufactured from a high-temperature-resistant chromium-nickel-silicon alloy. With approximately 20% chromium, 14% nickel, and added silicon, this material offers outstanding oxidation resistance, excellent strength at elevated temperatures, and superior resistance to high-temperature corrosion. It is an ideal choice for shielding Low Temperature Superheater (LTSH) tubes, which are frequently exposed to flue gases carrying ash and particulate matter that can cause rapid wear. The Low Temperature Superheater (LTSH) is a section in a boiler where saturated steam from the steam drum is superheated to a moderately higher temperature before entering the high-temperature superheater stages. Positioned in areas with relatively lower flue gas temperatures, the LTSH helps improve thermal efficiency and reduces moisture content in steam. Due to constant exposure to abrasive flue gases and ash, LTSH tubes are prone to wear and require protective shielding, such as half round tube shields, to extend service life. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of 1Cr20Ni14Si2 Half Round Tube Shields, providing high-performance shielding solutions for challenging industrial heat transfer applications. Chemical Composition of 1Cr20Ni14Si2 – Heat-Resistant Alloy Steel • Carbon (C): ≤ 0.15% • Manganese (Mn): ≤ 1.50% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.030% • Silicon (Si): 1.00 – 2.50% • Chromium (Cr): 19.0 – 22.0% • Nickel (Ni): 13.0 – 15.0% • Iron (Fe): Balance Applications: Best suited for components exposed to oxidizing environments, fluctuating temperatures, and particulate flow where metal surface protection is critical. Uses • Protection of LTSH tubes in thermal power plant boilers • Coverage of heat exchanger tubes in waste heat recovery boilers • Shielding superheater coils from ash erosion and thermal stress • Ideal for utility boilers, steam generators, and flue gas-exposed piping • Applied in industrial boilers within cement, pulp & paper, and refining sectors Features • High-temperature resistance – Performs well in continuous service at elevated temperatures • Oxidation protection – Excellent resistance to flue gas scaling and surface degradation • Precise fitment – Custom curved for exact tube geometry for secure and uniform coverage • Enhanced durability – Reduces erosion, thermal fatigue, and mechanical damage • Versatile installation – Compatible with clamp-on, weld-on, or banding attachment methods • Custom dimensions – Available in multiple sizes and thicknesses per system requirement Applications • thermal power stations – Protects superheater coils and economizer tube bends from low-temperature gas wear • WHRBs – Shields curved tubes in exhaust heat recovery systems • chemical and petrochemical plants – Ensures protection for process steam lines exposed to flue gases • HRSGs – Increases the durability of LTSH coil tubes in combined-cycle systems • boiler and furnace systems – Ideal for superheater areas prone to wear from ash and soot deposition Conclusion The 1Cr20Ni14Si2 Half Round Tube Shield for LTSH Tube by Ladhani Metal Corporation – manufacturer, supplier, and exporter – offers excellent resistance to oxidation, scaling, and thermal damage in low-temperature superheater zones. Its heat-resistant composition and long service life make it a dependable choice for demanding boiler and heat exchanger applications across multiple industries. For custom requirements or technical inquiries, contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are specially engineered to protect boiler, superheater, and heat exchanger tubes from surface wear, high-temperature scaling, flue gas erosion, and slag buildup. These shields are widely used in thermal power plants, waste heat recovery systems, and high-temperature industrial processes. Designed in a half-round profile, they ensure secure and easy installation over curved or straight tubes, extending tube service life and reducing maintenance interruptions. Cr23Ni13 U Type Outer Half Round Tube Shield The Cr23Ni13 U Type Outer Half Round Tube Shield is manufactured from a high-alloy austenitic stainless steel containing approximately 23% chromium and 13% nickel. This alloy provides superior resistance to oxidation, high-temperature corrosion, and thermal fatigue. The outer U-type shield is designed to protect the external curvature of U-bend tubes, which are often exposed to the harshest operating conditions—such as direct flame impingement, slag attack, and aggressive flue gas streams. • Outer U Type Half Round Tube Shield – Offers targeted protection for the outer arc of U-bend tubes, shielding against intense heat, slag erosion, and high-velocity gas flow. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of Cr23Ni13 U Type Outer Half Round Tube Shields, offering durable, high-performance solutions for critical thermal and chemical environments. Chemical Composition of Cr23Ni13 – High-Alloy Austenitic Stainless Steel • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 1.50% • Phosphorus (P): ≤ 0.040% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.50% • Chromium (Cr): 22.0 – 24.0% • Nickel (Ni): 12.0 – 14.0% • Iron (Fe): Balance Applications: Ideal for high-temperature, oxidizing, and corrosive environments requiring strong thermal stability, scale resistance, and long-term tube protection. Uses • Shielding U-bend outer arcs in superheaters and reheaters exposed to direct flame and thermal cycling • Protection of return bends in waste heat recovery boilers (WHRBs) and heat recovery steam generators (HRSGs) • Coverage for high-temperature bends in petrochemical process heaters and cracking units • Applied in radiant coils and furnace tubes operating under oxidizing and high-velocity gas environments • Suitable for metallurgical, cement, and gas processing industries with extreme thermal conditions Features • Excellent oxidation and corrosion resistance – High chromium and nickel content ensures scale resistance in aggressive atmospheres • High thermal stability – Performs reliably at temperatures exceeding 1100°C, with resistance to thermal fatigue and distortion • Outer bend protection – Specifically guards the most vulnerable surface of the U-bend against slag and flame exposure • Custom fitment – Manufactured to match precise tube diameters and bend radii for tight, stable installation • Easy to install – Mountable with clamps, tack welds, or stainless bands without system disassembly • Long service life – Reduces frequency of tube replacement, enhancing system reliability and uptime Applications • thermal power plants – Used on outer arcs of U-bend tubes in boilers and superheaters to protect against slag and oxidation • petrochemical plants – Shields return bends in high-temperature heaters exposed to process gas erosion and carburization • waste heat recovery – Protects bends in WHRBs and HRSGs subjected to hot gas streams and temperature fluctuations • industrial furnaces – Installed in radiant sections and high-temperature piping in incinerators and process furnaces • cement and metallurgy industries – Applied to bends exposed to flame, dust, and thermal cycling under extreme heat Conclusion The Cr23Ni13 U Type Outer Half Round Tube Shield by Ladhani Metal Corporation—manufacturer, supplier, and exporter—is a robust, heat-resistant solution for protecting the outer curvature of U-bend tubes in aggressive thermal environments. With high oxidation resistance, thermal stability, and long-term structural durability, this shield is ideal for demanding applications in power, chemical, and industrial sectors where performance and reliability are critical. For technical consultation, custom orders, or quotations, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are precision-crafted protective components used to shield boiler and heat exchanger tubes from high-temperature oxidation, slag accumulation, erosion, and thermal fatigue. These shields are essential in industrial systems where tubes are exposed to flue gases, particulate flow, and repeated heating cycles. Their half-round design enables efficient and secure installation over straight or curved tube sections, significantly extending tube life and reducing maintenance frequency. 1Cr25Ni20Si2 U Type Outer Half Round Tube Shield The 1Cr25Ni20Si2 U Type Outer Half Round Tube Shield is manufactured from a high-temperature resistant austenitic alloy containing 25% chromium, 20% nickel, and 2% silicon. This combination offers excellent oxidation resistance, strong thermal stability, and enhanced anti-scaling performance at elevated temperatures. Designed specifically to cover the outer arc of U-bend tubes, this shield protects surfaces most exposed to hot gases, flame impingement, and corrosive particles in demanding thermal environments. • Outer U Type Half Round Tube Shield – Protects the external arc of U-bend tubes from direct exposure to slag, high-velocity flue gas, and oxidizing atmospheres. Ladhani Metal Corporation is a reputed manufacturer, supplier, and exporter of 1Cr25Ni20Si2 U Type Outer Half Round Tube Shields, offering durable and heat-resistant solutions for thermal, petrochemical, and metallurgical applications. Chemical Composition of 1Cr25Ni20Si2 – Austenitic Heat-Resistant Alloy • Carbon (C): ≤ 0.10% • Manganese (Mn): ≤ 1.50% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.030% • Silicon (Si): 1.50 – 2.50% • Chromium (Cr): 24.0 – 26.0% • Nickel (Ni): 19.0 – 22.0% • Iron (Fe): Balance Applications: Best suited for environments requiring resistance to oxidation, thermal cycling, and high-temperature corrosion, especially in furnaces and exhaust systems. Uses • Outer arc protection of U-bend tubes in reheaters and superheaters exposed to slag, flame, and flue gas in power plants • Shielding external curves of return bends in waste heat recovery units (WHRBs) and HRSGs • Applied in radiant coils and heat exchanger bends operating in high-temperature industrial furnaces • Suitable for petrochemical processing units, steam reformers, and chemical heaters handling oxidizing or carburizing gases • Ideal for high-heat metallurgical and cement kiln systems requiring thermal fatigue and scale resistance Features • Excellent high-temperature oxidation resistance – High chromium and silicon content forms a stable protective scale layer • Enhanced anti-scaling performance – Withstands prolonged exposure to oxidizing environments up to 1150°C • Outer bend protection – Shields the most exposed section of U-bend tubes from erosion, slag, and thermal impact • Precision fitment – Custom-made to match tube radius and diameter for secure, rattle-free installation • Easy to install – Secured by clamps, stainless steel bands, or tack welding without disassembling the system • Long operational lifespan – Reduces tube wear and replacement frequency in aggressive thermal service conditions Applications • power generation – Used on U-bend outer arcs in superheaters and reheaters for oxidation and slag protection • petrochemical plants – Shields tube bends in reformers and high-temperature heaters exposed to process gas erosion • waste heat recovery boilers – Installed in WHRBs and HRSGs operating under fluctuating temperatures and gas flow • cement and metallurgy industries – Protects curved tubes and heat exchanger bends exposed to high-temperature dust and gas streams • furnace and incineration systems – Applied to outer arcs in radiant coils subjected to direct flame and extreme heat Conclusion The 1Cr25Ni20Si2 U Type Outer Half Round Tube Shield by Ladhani Metal Corporation—manufacturer, supplier, and exporter—is a high-performance shielding component designed for the most demanding high-temperature industrial environments. With its superior oxidation resistance, scale protection, and thermal fatigue strength, it provides lasting protection to U-bend tubes in boilers, furnaces, and heat exchangers across the power, petrochemical, and metallurgical sectors. For technical consultation, custom orders, or quotations, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are precision-manufactured components designed to protect boiler and heat exchanger tubes from erosion, scaling, slag deposition, and high-temperature corrosion. These shields are essential for ensuring the longevity of tubes in power plants, petrochemical units, and high-heat industrial systems where tubes are subjected to direct flame, abrasive particles, and corrosive gases. Their half-round form enables easy and secure installation over curved or straight tube sections. Cr25Ni20 U Type Outer Half Round Tube Shield The Cr25Ni20 U Type Outer Half Round Tube Shield is fabricated from a high-alloy austenitic stainless steel containing approximately 25% chromium and 20% nickel. This alloy offers exceptional oxidation resistance, thermal stability, and resistance to carburization and sulfidation at elevated temperatures. The outer U-type shield is specifically designed to cover the external arc of U-bend tubes in superheaters, reheaters, and reformers, where they are exposed to intense heat and reactive flue gases. • Outer U Type Half Round Tube Shield – Provides robust coverage to the outer curvature of U-bend tubes, protecting against flame impingement, slag erosion, and high-temperature corrosion. Ladhani Metal Corporation is a leading manufacturer, supplier, and exporter of Cr25Ni20 U Type Outer Half Round Tube Shields, delivering high-performance tube protection for the most demanding thermal and chemical environments. Chemical Composition of Cr25Ni20 – High-Temperature Austenitic Stainless Steel • Carbon (C): ≤ 0.10% • Manganese (Mn): ≤ 1.50% • Phosphorus (P): ≤ 0.040% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 2.00% • Chromium (Cr): 24.0 – 26.0% • Nickel (Ni): 19.0 – 22.0% • Iron (Fe): Balance Applications: Ideal for extreme heat environments and oxidizing atmospheres such as furnaces, boilers, and process heaters requiring excellent scale resistance and thermal strength. Uses • Outer arc shielding of U-bend tubes in superheaters and reheaters in high-temperature thermal power plants • Protection of external bends in petrochemical heat exchangers and reformers exposed to high-temperature process gases • Coverage for U-bend tubes in waste heat recovery boilers and HRSGs operating under oxidizing and carburizing gas flows • Applied in radiant coils and return bends in industrial furnaces and incinerators exposed to direct flame and slag • Suitable for chemical and gas processing applications where metal surfaces face extreme temperature and thermal fatigue Features • Exceptional high-temperature performance – Resists scaling, oxidation, and deformation at temperatures above 1100°C • Superior corrosion resistance – High chromium and nickel content provide defense against aggressive gas attacks • Targeted outer arc protection – Guards the most exposed section of U-bend tubes from slag, heat, and particulate damage • Precision engineered – Manufactured to custom tube diameter and radius for tight and vibration-free installation • Easy installation – Designed for quick mounting using clamps, tack welds, or stainless steel banding • Long-term durability – Reduces tube replacement frequency and enhances system efficiency in harsh operating conditions Applications • thermal and captive power plants – Installed on outer arcs of U-bend tubes in boilers, superheaters, and reheaters • petrochemical and refinery systems – Shields tubes in steam reformers and process heaters subjected to extreme temperatures • waste heat recovery boilers – Protects tube bends in HRSGs and WHRBs from scale, oxidation, and thermal fatigue • metallurgical and cement industries – Applied in radiant tubes and hot gas ducts exposed to slag, dust, and intense flame • high-temperature chemical plants – Used in reactors and cracking units where resistance to carburizing and oxidizing gases is essential Conclusion The Cr25Ni20 U Type Outer Half Round Tube Shield by Ladhani Metal Corporation—manufacturer, supplier, and exporter—is a high-performance protective component for U-bend tubes exposed to severe thermal and chemical stresses. With outstanding heat resistance, oxidation protection, and structural integrity, it ensures long-term tube life and efficient performance in boilers, heat exchangers, and reformers across thermal, petrochemical, and industrial sectors. For technical consultation, custom orders, or quotations, please contact Ladhani Metal Corporation.