'high flow velocities'

Ladhani Metal Corporation manufactures and exports SS Half Round Shields for Economizer Tubes, designed to safeguard boiler tubes from erosion, oxidation, and abrasive wear. Economizer tubes are responsible for preheating feedwater using flue gas heat before it enters the boiler drum. These tubes are constantly exposed to high-velocity flue gases and ash particles, which cause localized thinning and premature tube failures. SS Half Round Shields act as protective covers, extending tube life, reducing maintenance needs, and ensuring uninterrupted boiler operation. Function of Economizer Tubes • Preheat feedwater using residual flue gas heat in the economizer section of the boiler • Continuously exposed to erosive ash-laden gases at medium-to-high velocities • Protected with Half Round Shields to minimize wear, scaling, and erosion in critical areas Ladhani Metal Corporation manufactures, supplies, and exports SS Half Round Shields for Economizer Tubes in a wide range of lengths, diameters, thicknesses, and custom configurations for both domestic and international applications. Available Grades • SS 304 / SS 304L • SS 310 / SS 310S • SS 316 / SS 316L • SS 410 / SS 420 / SS 430 • 1Cr13 • 1Cr18Ni9Ti • 1Cr20Ni14Si2 • 1Cr25Ni20Si2 • Cr23Ni13 • Cr25Ni20 Applications: Widely used in thermal power stations, waste heat recovery boilers (WHRBs), heat recovery steam generators (HRSGs), and industrial boilers where economizer tube protection is essential. Uses • Shields economizer tubes from erosion caused by flue gas and ash flow • Provides resistance against oxidation and scaling at elevated temperatures • Extends tube service life and lowers replacement frequency • Ideal for utility boilers, HRSGs, WHRBs, and industrial steam systems Features • Excellent erosion, oxidation, and corrosion resistance • Superior thermal stability under fluctuating boiler conditions • Precision-fitted design for accurate and secure installation • Manufactured in multiple stainless steel and alloy grades for varied applications Applications • Power generation boilers – Protection for economizer tubes in erosive gas streams • Waste heat recovery boilers – Ensures tube durability under abrasive conditions • Heat recovery steam generators – Reliable in cyclic thermal environments • Industrial boilers – Cost-effective solution for extending economizer tube life Conclusion The SS Half Round Shield for Economizer Tubes by Ladhani Metal Corporation offers durable and cost-efficient protection for boiler tubes exposed to erosive and oxidizing conditions. Manufactured in stainless steel grades SS 304/304L, SS 310/310S, SS 316/316L, SS 410/420/430, and special alloys including 1Cr13, 1Cr18Ni9Ti, 1Cr20Ni14Si2, 1Cr25Ni20Si2, Cr23Ni13, and Cr25Ni20, these shields are engineered for precision fit, durability, and export-ready performance for global power and industrial applications. #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Muzaffarpur#halftubeshield #utypehalftubeshield #tubeshieldexporter #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier #SSShielding #IndustrialTubeShield #BoilerTubeGuard #CustomMetalParts #SteelIndustryIndia #MetalEngineering #HeavyIndustrySupply #StainlessSteelIndia #SteelExporters #MetalComponentExport #FabricatedProducts #SteelDealer #IndustrialSupplyIndia #BoilerTubeFittings #TubeShieldingSolutions #HalfTubeCover #HeatExchangerShield #HalfRoundReheaterShield #ReheaterTubeShield #BoilerReheaterProtection #PowerPlantTubeShield #BoilerErosionShield #SteamBoilerTubeShield #HighTempTubeShield #BoilerWearProtection

Ladhani Metal Corporation manufactures and exports Half Round Shields for Economizer Tubes, designed to protect tubes operating in the economizer section of boilers. Economizer tubes are exposed to erosive flue gases, abrasive fly ash, and high-velocity particle flow that can cause localized wear and surface thinning. Half Round Shields serve as sacrificial barriers, preventing premature tube failures, extending service life, and ensuring reliable boiler operation with reduced maintenance downtime. Function of Economizer Tubes • Preheat feedwater using residual flue gas heat before it enters the boiler drum • Continuously exposed to ash-laden flue gases at medium-to-high velocities • Require shielding in high-impact zones to prevent erosion and metal loss Ladhani Metal Corporation manufactures, supplies, and exports Half Round Shields for Economizer Tubes in various lengths, diameters, thicknesses, and geometries to suit diverse boiler layouts across domestic and international markets. Available Grades • SS 304 / SS 304L • SS 310 / SS 310S • SS 316 / SS 316L • SS 410 / SS 420 / SS 430 • 1Cr13 • 1Cr18Ni9Ti • 1Cr20Ni14Si2 • 1Cr25Ni20Si2 • Cr23Ni13 • Cr25Ni20 Applications: Widely used in thermal power plants, industrial boilers, waste heat recovery boilers (WHRBs), and heat recovery steam generators (HRSGs). Uses • Protects economizer tubes from erosion and abrasive ash particles • Guards against oxidation and surface scaling in flue gas paths • Reduces tube maintenance and replacement frequency • Ensures longer service life of economizer components in power plants and industrial boilers Features • Excellent resistance to erosion, oxidation, and scaling • Superior durability in medium-to-high temperature boiler atmospheres • Precision-engineered fit for secure installation on economizer tubes • Available in stainless steel and high-performance alloy grades Applications • Power generation boilers – Shielding economizer tubes against flue gas erosion • Waste heat recovery boilers – Durable protection in abrasive gas zones • Heat recovery steam generators – Reliable in cyclic temperature operations • Industrial boilers – Cost-effective solution for prolonging tube life Conclusion The Half Round Shield for Economizer Tubes from Ladhani Metal Corporation offers reliable, long-lasting protection against erosion and oxidation in high-velocity gas environments. Manufactured in stainless steel grades SS 304/304L, SS 310/310S, SS 316/316L, SS 410/420/430, and special alloys such as 1Cr13, 1Cr18Ni9Ti, 1Cr20Ni14Si2, 1Cr25Ni20Si2, Cr23Ni13, and Cr25Ni20, these shields are engineered for precision, durability, and export-quality performance in boilers worldwide.

Ladhani Metal Corporation manufactures and exports Half Round Shields for LTSH (Low Temperature Superheater) Tubes, Type-IV design, engineered to safeguard boiler tubes from erosion, oxidation, and abrasive damage. LTSH tubes in Type-IV sections operate in the convection pass of the boiler, exposed to high flue gas velocities, dust-laden atmospheres, and ash particles that gradually erode the tube surfaces. Type-IV Half Round Shields provide extended surface coverage and robust protection, making them ideal for demanding boiler environments where long service life is critical. Function of LTSH Tubes • Carry steam through the low-temperature superheater section of the boiler • Operate under moderate-to-high temperatures with flue gas erosion risk • Protected with Half Round Shields to reduce wear, oxidation, and maintenance frequency Ladhani Metal Corporation manufactures, supplies, and exports Half Round Tube Shields for LTSH, Type-IV, in a wide range of sizes and grades to meet diverse power plant and industrial boiler requirements. Available Grades • SS 304 / SS 304L • SS 310 / SS 310S • SS 316 / SS 316L • SS 410 / SS 420 / SS 430 • 1Cr13 • 1Cr18Ni9Ti • 1Cr20Ni14Si2 • 1Cr25Ni20Si2 • Cr23Ni13 • Cr25Ni20 Applications: Suitable for low-temperature superheater sections in thermal power stations, waste heat recovery boilers (WHRBs), and heat recovery steam generators (HRSGs), where durability and erosion resistance are required. Uses • Protects LTSH tubes from erosion caused by flue gases and abrasive particles • Minimizes scaling and damage in soot blower impact zones • Extends tube life and reduces unplanned shutdowns • Widely used in WHRBs, HRSGs, utility boilers, and industrial steam plants Features • High resistance to oxidation and erosive flue gases • Stable mechanical performance at elevated temperatures • Designed for precision fit on Type-IV LTSH tubes • Available in stainless steels and high-performance special alloys Applications • Power generation boilers – Reliable shielding for LTSH tubes under erosive gas flow • Waste heat recovery boilers – Prevents early tube failures from abrasion • Heat recovery steam generators – Ensures long service life in cyclic conditions • Industrial boilers – Provides dependable tube protection in dusty environments Conclusion The Half Round Shield for LTSH, Type-IV, by Ladhani Metal Corporation is a robust and efficient solution for boiler tube erosion protection. Manufactured in stainless steel and alloy grades such as SS 304/304L, SS 310/310S, SS 316/316L, SS 410/420/430, 1Cr13, 1Cr18Ni9Ti, 1Cr20Ni14Si2, 1Cr25Ni20Si2, Cr23Ni13, and Cr25Ni20, these shields are engineered for durability, easy installation, and superior performance. For detailed specifications and supply inquiries, contact Ladhani Metal Corporation. #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Muzaffarpur#halftubeshield #utypehalftubeshield #tubeshieldexporter #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier #SSShielding #IndustrialTubeShield #BoilerTubeGuard #CustomMetalParts #SteelIndustryIndia #MetalEngineering #HeavyIndustrySupply #StainlessSteelIndia #SteelExporters #MetalComponentExport #FabricatedProducts #SteelDealer #IndustrialSupplyIndia #BoilerTubeFittings #TubeShieldingSolutions #HalfTubeCover #HeatExchangerShield #HalfRoundReheaterShield #ReheaterTubeShield #BoilerReheaterProtection #PowerPlantTubeShield #BoilerErosionShield #SteamBoilerTubeShield #HighTempTubeShield #BoilerWearProtection

Half Round Tube Shield Ladhani Metal Corporation manufactures precision-engineered Half Round Tube Shields to protect boiler and heat exchanger tubes from corrosion, erosion, and surface degradation. Designed for durability in aggressive environments, these shields are especially suited for thermal equipment where tubes are subjected to high flow velocities, abrasive particles, and flue gas turbulence. Their half-round shape allows easy installation while offering long-term protection and reduced maintenance. 1Cr20Ni14Si2 Half Round Tube Shield for LTSH Tube The 1Cr20Ni14Si2 Half Round Tube Shield is manufactured from a high-temperature-resistant chromium-nickel-silicon alloy. With approximately 20% chromium, 14% nickel, and added silicon, this material offers outstanding oxidation resistance, excellent strength at elevated temperatures, and superior resistance to high-temperature corrosion. It is an ideal choice for shielding Low Temperature Superheater (LTSH) tubes, which are frequently exposed to flue gases carrying ash and particulate matter that can cause rapid wear. The Low Temperature Superheater (LTSH) is a section in a boiler where saturated steam from the steam drum is superheated to a moderately higher temperature before entering the high-temperature superheater stages. Positioned in areas with relatively lower flue gas temperatures, the LTSH helps improve thermal efficiency and reduces moisture content in steam. Due to constant exposure to abrasive flue gases and ash, LTSH tubes are prone to wear and require protective shielding, such as half round tube shields, to extend service life. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of 1Cr20Ni14Si2 Half Round Tube Shields, providing high-performance shielding solutions for challenging industrial heat transfer applications. Chemical Composition of 1Cr20Ni14Si2 – Heat-Resistant Alloy Steel • Carbon (C): ≤ 0.15% • Manganese (Mn): ≤ 1.50% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.030% • Silicon (Si): 1.00 – 2.50% • Chromium (Cr): 19.0 – 22.0% • Nickel (Ni): 13.0 – 15.0% • Iron (Fe): Balance Applications: Best suited for components exposed to oxidizing environments, fluctuating temperatures, and particulate flow where metal surface protection is critical. Uses • Protection of LTSH tubes in thermal power plant boilers • Coverage of heat exchanger tubes in waste heat recovery boilers • Shielding superheater coils from ash erosion and thermal stress • Ideal for utility boilers, steam generators, and flue gas-exposed piping • Applied in industrial boilers within cement, pulp & paper, and refining sectors Features • High-temperature resistance – Performs well in continuous service at elevated temperatures • Oxidation protection – Excellent resistance to flue gas scaling and surface degradation • Precise fitment – Custom curved for exact tube geometry for secure and uniform coverage • Enhanced durability – Reduces erosion, thermal fatigue, and mechanical damage • Versatile installation – Compatible with clamp-on, weld-on, or banding attachment methods • Custom dimensions – Available in multiple sizes and thicknesses per system requirement Applications • thermal power stations – Protects superheater coils and economizer tube bends from low-temperature gas wear • WHRBs – Shields curved tubes in exhaust heat recovery systems • chemical and petrochemical plants – Ensures protection for process steam lines exposed to flue gases • HRSGs – Increases the durability of LTSH coil tubes in combined-cycle systems • boiler and furnace systems – Ideal for superheater areas prone to wear from ash and soot deposition Conclusion The 1Cr20Ni14Si2 Half Round Tube Shield for LTSH Tube by Ladhani Metal Corporation – manufacturer, supplier, and exporter – offers excellent resistance to oxidation, scaling, and thermal damage in low-temperature superheater zones. Its heat-resistant composition and long service life make it a dependable choice for demanding boiler and heat exchanger applications across multiple industries. For custom requirements or technical inquiries, contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are precision-engineered components used to protect boiler and heat exchanger tubes from erosion, scaling, and high-temperature corrosion. These shields are widely applied in industrial systems exposed to thermal cycling, aggressive gases, and particulate flow. Their half-round shape allows for simple and secure installation over straight or curved tube surfaces, extending tube life and reducing maintenance needs. SS 316L U Type Half Round Tube Shield The SS 316L U Type Half Round Tube Shield is specifically designed to offer enhanced protection to U-bend sections in heat exchangers, superheaters, and steam reformers. Fabricated from SS 316L, a low-carbon austenitic stainless steel alloyed with molybdenum, it delivers superior resistance to pitting, crevice corrosion, and intergranular attack in chloride-rich and high-temperature environments. The U-type design allows for seamless coverage of both the inner and outer arcs of tube bends, where thermal and mechanical stresses are most concentrated. • Outer U Type Half Round Tube Shield – Protects the outer bend of the tube against high-velocity gas impact, slag accumulation, and surface oxidation. • Inner U Type Half Round Tube Shield – Shields the inner curve from localized erosion, turbulence-related wear, and thermal fatigue cracking. Ladhani Metal Corporation manufactures and supplies SS 316L U Type Half Round Tube Shields for industries operating in corrosive, welded, or high-heat service conditions where enhanced durability and metallurgical stability are critical. Chemical Composition of SS 316L – Low Carbon Austenitic Stainless Steel • Carbon (C): ≤ 0.03% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 16.0 – 18.0% • Nickel (Ni): 10.0 – 14.0% • Molybdenum (Mo): 2.0 – 3.0% • Iron (Fe): Balance Applications: Specifically suited for high-chloride, welded, and high-temperature systems where corrosion resistance and thermal stability are essential. Uses • Protection of U-bend tube sections in superheaters and reheaters in thermal power plants • Coverage for return bends in chemical heat exchangers and ammonia reformers • Shielding curved tube segments in WHRBs and HRSGs exposed to thermal cycling • Corrosion and wear protection in condensers and evaporators operating with chlorides or acidic gases • Ideal for coastal, offshore, and marine installations involving saline or humid environments Features • Corrosion-resistant low carbon grade – SS 316L’s reduced carbon content ensures resistance to sensitization and intergranular corrosion after welding. • High-performance under heat – Maintains structural integrity and corrosion resistance in elevated temperature applications. • Dual-bend protection – Available in inner and outer U-type configurations to safeguard the entire arc of the U-bend. • Custom-formed profiles – Engineered to precisely fit tube diameter and bend radius for secure and stable installation. • Quick installation – Designed for easy mounting via tack welds, banding, or clamping without requiring tube disassembly. • Tailored dimensions – Manufactured in a range of thicknesses, lengths, and profiles to meet exact project needs. Applications • thermal power plants – Installed on U-bend tubes in superheaters and reheaters to mitigate scale formation and corrosion due to flue gases. Enhances heat exchanger reliability and life span. • petrochemical refineries – Used in steam reformers and exchangers handling chlorides, acids, and hydrocarbons. Ensures long-term corrosion resistance in aggressive environments. • waste heat recovery units – Protects U-shaped tubes from erosion and cracking caused by fluctuating gas velocities and slag deposits. • fertilizer and chemical plants – Shields critical tube bends from acidic or chloride-containing media in reformers and process heaters. • marine and coastal systems – Provides anti-corrosion protection in salt-laden and humid atmospheres for extended tube life. Conclusion The SS 316L U Type Half Round Tube Shield by Ladhani Metal Corporation is a robust and corrosion-resistant solution for protecting U-bend tube sections in heat-intensive and chemically aggressive systems. With its low carbon content and molybdenum enhancement, it ensures excellent resistance to pitting, scaling, and intergranular corrosion. Available in inner and outer U-bend configurations and tailored to match system specifications, these shields offer reliable, long-lasting tube protection in power, chemical, marine, and industrial sectors. For technical consultation, custom orders, or quotations, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are high-precision protective elements designed to safeguard boiler and heat exchanger tubes against mechanical wear, erosion, and high-temperature gas attack. These shields are essential in industrial systems where exposure to thermal cycling, high-velocity gases, and abrasive particles can rapidly degrade unprotected tubing. SS 410 Half Round Tube Shield The SS 410 Half Round Tube Shield is a semi-cylindrical tube protector manufactured using stainless steel grade 410. As a martensitic stainless steel, SS 410 offers a unique combination of good corrosion resistance, high mechanical strength, and excellent wear resistance. It is particularly suitable for environments with moderate corrosion exposure and significant mechanical stress. The half-round shape is precisely formed to ensure a tight fit over exposed tubes, providing a durable and reliable barrier that extends tube service life in industrial boilers, heat exchangers, and process equipment. Chemical Composition of SS 410 – Martensitic Stainless Steel • Carbon (C): 0.08 – 0.15% • Manganese (Mn): ≤ 1.00% • Phosphorus (P): ≤ 0.040% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 11.5 – 13.5% • Nickel (Ni): ≤ 0.75% • Iron (Fe): Balance Uses • Boiler Tube Protection – Provides abrasion and erosion resistance in utility and industrial boilers where tubes face harsh combustion environments. • Heat Exchanger Shielding – Reduces mechanical wear caused by high flow velocities and particulate impact in condensers and evaporators. • Furnace Tube Safeguarding – Protects radiant and convection tubes from scale buildup and flame impingement in high-temperature furnace applications. • Steam and Process Line Protection – Extends the life of piping systems in moderately corrosive environments with mechanical stress. • Air Preheater and Economizer Units – Shields tubes from dust-laden gas erosion in flue gas recovery systems. Features • Excellent Wear Resistance – High hardness and toughness of SS 410 make it ideal for shielding tubes exposed to abrasive flows or soot-blowing operations. • Good Oxidation Resistance – Performs reliably in mildly corrosive and oxidizing environments up to 650°C (1200°F). • High Strength – Provides superior mechanical durability under vibration, pressure, and impact loading conditions. • Easy to Fabricate and Install – Half-round design allows for quick field installation and secure clamping or welding without altering system layout. • Economical Option – Offers a cost-effective tube protection solution where severe corrosion resistance is not critical. • Customization – Available in different thicknesses, diameters, lengths, and surface finishes (pickled or bright annealed). Applications • Thermal Power Plants – Used in boiler and superheater tubes to resist wear from flue gas erosion and thermal fluctuations. • Cement and Steel Industries – Protects tubes in high-wear areas exposed to dust, ash, and scale in kilns, coolers, and furnaces. • Oil Refineries – Applied in areas where high strength is required along with moderate corrosion resistance, such as preheaters or tube bundles. • Chemical Plants – Suitable for process tubes in mildly corrosive environments with strong flow dynamics or steam load cycling. • Pulp and Paper Industry – Shields tubes in recovery and power boilers exposed to high-pressure steam and abrasive residues. • Biomass and Waste-to-Energy Plants – Guards against erosion from fly ash and combustion residues in environmentally demanding systems. Conclusion The SS 410 Half Round Tube Shield from Ladhani Metal Corporation is a robust and reliable solution for protecting critical tube systems subjected to mechanical wear and thermal stress. Its excellent hardness and strength make it especially effective in applications involving high-velocity gas flow, abrasive particles, and fluctuating temperatures. While not suited for highly corrosive environments, SS 410 excels in systems where durability, cost-efficiency, and resistance to erosion are key priorities. With customizable sizing and expert engineering support, Ladhani Metal Corporation ensures dependable, application-specific shielding solutions for a wide range of industries. For technical specifications, fabrication assistance, or pricing inquiries, please contact Ladhani Metal Corporation.

ladhani metal corporation is supplier and exporter of AISI 321H sheet , plate , coil , flat bar , circular plate , plate flanges , farma , laser cutting design sheet , waterjet cutting design sheet.AISI 321H is the basic austenitic 18/8 steel stabilised by Titanium or additions. These grades are used because they are not sensitive to intergranular corrosion after heating within the carbide precipitation range of 425-850°C.AISI 321H is the grade of choice for applications in the temperature range of up to about 900°C, combining high strength, resistance to scaling and phase stability with resistance to subsequent aqueous corrosion. Cold Bending : It has excellent cold working properties and cold bending can generally be carried out without too much difficulty. Hot Bending : Hot bending should be performed at 950oC - 1100Oc. Corrosion Resistance : it similar resistance to general corrosion in most media as 304, but not as good as 316. Stress Corrosion Cracking : it has similar resistance to stress corrosion cracking as 304, but not as good as 316. Pitting Corrosion / Crevice Corrosion : It has similar resistance to pitting and crevice corrosion as 304, but not as good as 316. Intergranular Corrosion : it has better resistance to intergranular corrosion than most of the standard 300 grades other than the low carbon types 304L, 316L and 317L due to its titanium content.N.B. Forging : Heat uniformly to 1150oC - 1200oC Machining: It is more difficult to machine than most of the standard austenitic stainless steels, due to its titanium addition. Our Domestic reach is unlimited and we supply to this following cities Ahmedabad, Amritsar, Aurangabad, Bangalore, Bhopal, Chandigarh, Chennai, Coimbatore, Dhanbad, Faridabad, Ghaziabad, Guwahati, Gwalior, Howrah, Hyderabad, Indore, Jabalpur, Jaipur, Jodhpur, Kanpur, Kolkata, Kota, Lucknow, Ludhiana, Madurai, Meerut, Mumbai, Nagpur, Nashik, Navi Mumbai, New Delhi, Patna, Pune, Raipur, Rajkot, Ranchi, Solapur, Srinagar, Surat, Thane, Vadodara, Varanasi, Vijayawada, Visakhapatnam, Hubballi, Tiruchirappalli, Bareilly, Moradabad, Mysore, Gurgaon, Aligarh, Jalandhar, Bhubaneswar We export to following Countries: Russia, Canada, United States, China, Brazil, Australia, Argentina, Kazakhstan, Algeria, Denmark, Saudi Arabia, Mexico, Indonesia, Iran, Mongolia, Peru, South Africa, Colombia, Ethiopia, Bolivia, Egypt, Venezuela, Turkey, Chile, Myanmar, France, Ukraine, Madagascar, Botswana, Kenya, Thailand, Spain, Sweden, Uzbekistan, Morocco, Paraguay, Zimbabwe, Norway, Japan, Germany, Republic of the Congo, Finland, Vietnam, Malaysia, Poland, Oman, Italy, Philippines, Ecuador, New Zealand, United Kingdom, Guinea, Uganda, Nepal, Bangladesh.

Ladhani Metal Corporation offers Clip-On Tube Shields designed for quick installation and reliable protection of boiler tubes in power plants, refineries, petrochemical heaters, waste heat recovery boilers (WHRBs), and heat recovery steam generators (HRSGs). These shields feature a clip-on fastening mechanism that allows them to be mounted securely onto tube surfaces without welding, reducing installation time, labor, and downtime while still ensuring effective tube protection in high-wear areas. Function of Clip-On Tube Shields • Provide erosion and corrosion protection for boiler tubes in flue gas paths • Reduce downtime with fast, non-weld installation and removal • Shield tubes from soot blower jets, ash particle erosion, and hot flue gases • Extend service life of boiler components under high-temperature operation Ladhani Metal Corporation manufactures, supplies, and exports Clip-On Tube Shields in various sizes, thicknesses, and radii, catering to both domestic and international market requirements. Available Grades • SS 304 / SS 304L • SS 310 / SS 310S • SS 316 / SS 316L • SS 410 / SS 420 / SS 430 • 1Cr13 • 1Cr18Ni9Ti • 1Cr20Ni14Si2 • 1Cr25Ni20Si2 • Cr23Ni13 • Cr25Ni20 Applications: Widely used in reheater, superheater, economizer, and LTSH sections where high-velocity flue gases and abrasive particles cause localized tube erosion. Uses • Protects boiler tubes from erosion, oxidation, and mechanical wear • Shields against soot blower jet impingement • Reduces costly maintenance and tube replacement • Suitable for power plants, HRSGs, WHRBs, and refinery heaters Features • Clip-on design – Easy installation and removal without welding • Strong hold for reliable protection in high-velocity zones • Corrosion and oxidation resistance at elevated temperatures • Designed for accurate fit and long-term service Applications • Power generation boilers – Fast protection solution for reheater/superheater tubes • Waste heat recovery boilers – Guards tubes in erosive gas flows • HRSGs – Provides durable shielding with minimal downtime • Industrial and petrochemical steam systems – Reliable in high-temperature cycles Conclusion The Clip-On Tube Shield from Ladhani Metal Corporation offers a practical and efficient solution for protecting boiler tubes from erosion and corrosion without requiring welding. Available in a wide range of stainless steel and alloy grades, these shields deliver precision, durability, and global supply capability to meet the needs of power generation and process industries.

Ladhani Metal Corporation offers SS Half Round Wedge Wire (WW) Tube Shields specially engineered to protect boiler tubes in power plants, refineries, petrochemical heaters, waste heat recovery boilers (WHRBs), and heat recovery steam generators (HRSGs). These shields are manufactured with a wedge wire surface that improves erosion resistance, enhances flue gas flow dynamics, and minimizes localized turbulence. Designed for severe operating environments, SS WW Tube Shields ensure reliable tube protection under high-velocity flue gas and abrasive ash particle exposure. Function of WW Tube Shields • Protect boiler tubes from erosion, oxidation, and soot blower jet impact • Reduce turbulence by guiding flue gas flow smoothly over tube surfaces • Increase service life of tubes operating in dust-laden high-temperature zones • Minimize downtime and maintenance in critical boiler sections Ladhani Metal Corporation manufactures, supplies, and exports SS Half Round Wedge Wire Tube Shields in standard and custom sizes, catering to both domestic and international boiler maintenance requirements. Available Grades • SS 304 / SS 304L • SS 310 / SS 310S • SS 316 / SS 316L • SS 410 / SS 420 / SS 430 • 1Cr13 • 1Cr18Ni9Ti • 1Cr20Ni14Si2 • 1Cr25Ni20Si2 • Cr23Ni13 • Cr25Ni20 Applications: Ideal for superheater, reheater, economizer, and LTSH sections of boilers where tube surfaces are exposed to abrasive flue gases, ash, and high thermal stresses. Uses • Shields boiler tubes from fly ash erosion and hot flue gases • Protects against damage from soot blowers and particle impact • Extends tube service life in high-temperature operations • Suitable for power generation, petrochemical, and refinery boilers Features • Wedge wire design for superior erosion and wear resistance • High mechanical strength with thermal stability • Corrosion and oxidation resistance under high heat • Precision-engineered for accurate fit and easy installation Applications • Power generation boilers – Reheater and superheater tube protection • Waste heat recovery boilers – Safeguards against abrasive gas flows • HRSGs – Long-lasting erosion protection for high-velocity flue gas paths • Petrochemical and refinery heaters – Durable performance in extreme heat Conclusion The SS Half Round Wedge Wire (WW) Tube Shield from Ladhani Metal Corporation provides advanced erosion protection, extended service life, and reliability in the most demanding boiler environments. Available in a wide range of stainless steel and alloy grades, these shields deliver precision, durability, and global supply capability for the power and process industries. #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Muzaffarpur#halftubeshield #utypehalftubeshield #tubeshieldexporter #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier #SSShielding #IndustrialTubeShield #BoilerTubeGuard #CustomMetalParts #SteelIndustryIndia #MetalEngineering #HeavyIndustrySupply #StainlessSteelIndia #SteelExporters #MetalComponentExport #FabricatedProducts #SteelDealer #IndustrialSupplyIndia #BoilerTubeFittings #TubeShieldingSolutions #HalfTubeCover #HeatExchangerShield #HalfRoundReheaterShield #ReheaterTubeShield #BoilerReheaterProtection #PowerPlantTubeShield #BoilerErosionShield #SteamBoilerTubeShield #HighTempTubeShield #BoilerWearProtection