DIN 2628 Carbon Steel flanges PN 250 are heavy-duty weld neck flanges manufactured in accordance with the DIN 2628 standard, designed for use in high-pressure systems operating up to 250 bar (3625 psi). These flanges are crafted from robust carbon steel grades, offering excellent mechanical strength, weldability, and cost-efficiency. With high tensile strength and good resistance to wear and fatigue, carbon steel flanges are ideal for structural and pressure-bearing applications in industries where corrosion is not a primary concern or where protective coatings are applied. Ladhani Metal Corporation supplies a comprehensive range of DIN 2628 PN 250 Carbon Steel flanges, engineered for demanding industrial environments. Known for precision machining, quality assurance, and consistent performance, our flanges are widely used in sectors such as oil and gas, power generation, water treatment, construction, and mechanical engineering. These flanges provide a reliable connection in pipeline systems that require durable performance under high pressure and mechanical stress. Pressure Rating: • PN 250 (250 bar / 3625 psi): Designed for high-pressure applications that demand strength, durability, and tight sealing under elevated loads. Flange Type: • Weld Neck Flanges Equipped with a tapered hub that enhances mechanical stability and reduces stress concentration at the weld. Ideal for fluctuating temperatures and high-pressure service. • Flat Face (FF) Flanges Flat face design allows for even gasket compression, reducing the risk of leakage when connected to cast or brittle piping components. Carbon Steel Grades and Composition: Common Grades: ASTM A105, ASTM A350 LF2 ASTM A105 • Carbon (C): ≤ 0.35% • Manganese (Mn): 0.60 – 1.05% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.040% • Silicon (Si): 0.10 – 0.35% Applications: Forged carbon steel used in ambient and high-temperature service. Ideal for valves, fittings, and flanges in oil, gas, and industrial pipelines. ASTM A350 LF2 • Carbon (C): ≤ 0.30% • Manganese (Mn): 0.60 – 1.35% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.040% • Silicon (Si): 0.15 – 0.30% Applications: Low-temperature carbon steel suitable for cryogenic and sub-zero environments. Commonly used in pipeline systems, compressors, and pressure vessels. Applications of DIN 2628 Carbon Steel Flanges PN 250: • Oil and Gas Pipelines Used in high-pressure oil, gas, and petrochemical systems where strength and structural integrity are critical. • Power Generation Applied in steam and thermal power plants, including boiler systems and heat exchangers. • Mechanical and Structural Systems Suitable for heavy-duty machinery, process piping, and structural pipe connections. • Water Treatment and Distribution Utilized in potable water and wastewater infrastructure requiring reliable, high-strength components. • HVAC and Industrial Utilities Installed in heating, ventilation, and compressed air systems operating at elevated pressures. Key Features: • Complies with DIN 2628 standard for high-pressure flange applications • PN 250 rating supports high-load, high-stress operational conditions • Weld neck design for optimal flow and reduced weld stress • Flat face option for even gasket pressure and secure sealing • Available in ASTM A105 and A350 LF2 grades • High mechanical strength and excellent machinability • Cost-effective option for non-corrosive or coated environments • Custom sizes, finishes, and drilling patterns available upon request Conclusion: DIN 2628 Carbon Steel Flanges PN 250 by Ladhani Metal Corporation offer a durable, economical solution for high-pressure systems in a variety of industrial applications. With excellent mechanical strength and versatility, these flanges are engineered to perform reliably in demanding environments where corrosion resistance is secondary to pressure and structural requirements. Contact Ladhani Metal Corporation for specifications, technical assistance, or to request a custom quotation for your project needs.

DIN 2573 Carbon Steel Flanges PN 6 are robust, low-pressure plate flanges manufactured from high-quality carbon steel, specifically developed for general-purpose applications in non-corrosive to mildly corrosive environments. These flanges are designed in accordance with the DIN 2573 standard and are widely used in industrial piping systems where moderate strength and affordability are key requirements. Their simple design and ease of installation make them suitable for low-pressure fluid transfer, air, steam, and water systems across various industries. Ladhani Metal Corporation is a reputable manufacturer and exporter of carbon steel flanges, offering products that adhere to strict international quality and dimensional standards. The DIN 2573 plate flange configuration provides a secure, gasket-sealed connection, ensuring reliable performance even in basic utility and mechanical piping systems. Pressure Rating: • PN 6 (6 bar / 87 psi): Suitable for low-pressure applications involving air, water, oil, and non-aggressive fluids in industrial or mechanical systems. Flange Types: • Plate Flanges Flat flanges designed for easy bolting and gasket sealing, offering a reliable connection in low-pressure systems. • Flat Face (FF) Flanges Ideal for systems using cast iron or non-metallic components, these flanges provide uniform gasket compression and reduce the risk of flange distortion. • Slip-On Flanges These flanges slide over the pipe and are welded on both sides, ensuring secure attachment and proper alignment in basic fluid and gas systems. • Custom-Machined Flanges Available in a variety of sizes and finishes, custom carbon steel flanges can be tailored to meet project-specific requirements. Carbon Steel Grades and Composition: Carbon Steel A105 (Forged) Composition: • Carbon (C): 0.35% max • Manganese (Mn): 0.60 – 1.05% • Phosphorus (P): 0.035% max • Sulfur (S): 0.040% max • Silicon (Si): 0.10 – 0.35% • Iron (Fe): Balance Applications: A105 carbon steel is commonly used for flanges in ambient and elevated temperature service, especially in oil and gas, water transmission, and mechanical systems. Its good machinability and weldability make it a cost-effective choice for general use. Carbon Steel ST37 / S235JR Composition: • Carbon (C): 0.17 – 0.20% • Manganese (Mn): ≤ 1.4% • Phosphorus (P) and Sulfur (S): ≤ 0.045% • Iron (Fe): Balance Applications: Used in structural piping, water distribution, fire protection systems, and low-pressure industrial piping. ST37/S235JR flanges offer reliable performance in applications where corrosion is minimal and pressure requirements are moderate. Applications of DIN 2573 Carbon Steel Flanges: • Water Distribution Systems: Used in water pipelines, treatment plants, and municipal systems where pressure ratings are low and material strength is sufficient. • HVAC and Utility Systems: Ideal for heating, ventilation, and cooling systems that operate under low pressure with non-corrosive fluids. • Oil and Gas (Low Pressure Segments): Applicable in low-pressure oil pipelines, tank farms, and non-critical utility lines. • General Industrial Piping: Widely used in manufacturing facilities for compressed air, inert gas lines, and general fluid handling. • Fire Protection Systems: Carbon steel flanges are commonly used in fire sprinkler systems and standpipe installations. Key Features: • Manufactured according to DIN 2573 specifications • PN 6 pressure rating for low-pressure fluid and utility applications • Excellent strength, machinability, and weldability • Cost-effective solution for non-aggressive environments • Available in A105, ST37, S235JR, and other carbon steel grades • Suitable for mechanical systems, utilities, and water transmission • Custom face finishes, drilling, and dimensions available Conclusion: DIN 2573 Carbon Steel Flanges PN 6 from Ladhani Metal Corporation offer a durable and economical choice for a wide range of low-pressure applications. Combining structural strength with manufacturing precision, these flanges are ideal for utility piping, water distribution, and general industrial use. For detailed technical support, custom dimensions, or pricing inquiries, contact Ladhani Metal Corporation today. 📞 Contact Ladhani Metal Corporation Website: https://www.ladhanimetal.in/ https://www.ladhanimetal.com/ Email: info@ladhanimetals.com Request a Quote: Custom dimensions, materials, and finishes available upon request

DIN 2566 carbon steel flanges PN 16 are durable and cost-effective threaded flanges designed for medium-pressure piping systems. Manufactured according to DIN 2566 standards, these flanges offer reliable, weld-free connections suitable for a wide range of industrial applications. Their threaded design ensures easy installation and removal, especially in setups requiring frequent maintenance or modifications. Ladhani Metal Corporation is a leading manufacturer and exporter of carbon steel flanges, delivering precision-engineered components with high mechanical strength, toughness, and machinability. DIN 2566 carbon steel flanges are widely used across industries such as oil & gas, power generation, construction, and water treatment. Flange Types: • Threaded (Screwed) Flanges: Enable fast, non-welded assembly—ideal for maintenance-driven or temporary systems. • Raised Face (RF) Flanges: Improve gasket sealing by focusing pressure on a smaller contact area. • Flat Face (FF) Flanges: Commonly used with cast iron or non-metallic equipment in low-to-medium pressure systems. • Forged Threaded Flanges: Provide enhanced strength, impact resistance, and dimensional accuracy. • Custom-Machined Flanges: Made to customer specifications including pressure class, size, or material variant. Available Carbon Steel Grades and Composition: 1. ASTM A105 (Forged Carbon Steel) • Carbon (C): ≤ 0.35% • Manganese (Mn): 0.60 – 1.05% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.040% • Silicon (Si): 0.10 – 0.35% Applications: Used in ambient and high-temperature pressure systems, including pipelines, valves, and pressure vessels. 2. ASTM A350 LF2 (Low-Temperature Carbon Steel) • Designed for increased impact resistance at low temperatures. • Offers good weldability and strength retention in cryogenic or sub-zero conditions. Applications: Ideal for cold weather installations such as gas processing, refrigeration lines, and cryogenic piping systems. Applications of DIN 2566 Carbon Steel Flanges: • Oil & Gas Industry: Used in pipelines, compressor units, and flow control systems • Petrochemical Plants: Handles hydrocarbons and other industrial fluids • Power Plants: Suitable for steam, gas, and cooling water pipelines • Water & Wastewater Treatment: Cost-effective for fluid handling and filtration lines • Structural & Mechanical Systems: Common in HVAC, infrastructure, and general engineering Key Features: • Manufactured to DIN 2566 standard with PN 16 pressure rating • High tensile strength, ductility, and resistance to wear • Economical and versatile for general-purpose applications • Threaded design for quick, weld-free installation • Compatible with coatings and protective treatments • Supplied with test certificates, inspection reports, and full material traceability Conclusion: DIN 2566 carbon steel flanges PN 16 from Ladhani Metal Corporation are a dependable and budget-friendly solution for medium-pressure piping systems. Known for their mechanical strength, reliability, and ease of installation, these flanges are engineered to perform in a wide variety of industrial environments. For detailed specifications, customization, or large-volume orders, contact Ladhani Metal Corporation today.

Product Name: Titanium Welding Wire Standard: AWS A5.16 Material: ERTi-2 Unit Price: $25usd/kg-$60usd/kg Diameter: 0.8mm/1mm/1.2mm/1.6mm/2mm/2.4mm/3mm/3.2mm etc. Surface: Bright

Porduct name : Titanium Steel Composite Tube plate Material: Titanium +steel,Titanium+stainless steel etc. Size &Standard: As per client drawing Production Method: Forging,annealing and machining Advantage: Excellent corrosion resistance ability Packing: Plywood case Application: Heat Exchanger, chemical equipment, Pressure Vessel, filter devices, etc. Titanium steel composite tube plate Name Clad Metal Base Metal Specification Standard Application Titanium-Steel Cladding plate TA1, TA2, TA9, TA10 Q235, Q245R Q345R Coating metal thickness: 0.5~50mm Base material thickness: 0.5~500mm ASME, ASTM petrochemical, vacuum salt making, Chlor-alkali, food, fertilizer, hydrometallurgy, electroplate and etc. Main applications: Titanium clad steel plate tube sheet is mainly used in two aspects: heat exchanger tube sheet and processing container plate. The total thickness of the tube sheet is 75-100mm and the thickness of the coating is 12-15mm. The total thickness of the processing vessel plate is 19-25mm and the coating thickness is 2-3mm. Titanium-steel clad plate has a good application prospect in the manufacture of heat exchanger tube sheet, large diameter (1800 mm) seamless head and reactor. Titanium clad steel plate tube sheet is used more in the reactor and terephthalic acid plant equipment, as well as ethylene glycol, maleic acid and rust remover production equipment. Some reservoirs have operating temperatures up to 200℃, internal pressure of 9 MPa, equipment diameters of 700 mm, length of 1080 mm, and composite plate thickness of (2 + 15) mm.For petrochemical equipment operating at ordinary high pressures and temperatures, the lining must provide good heat conduction and must withstand heat cycles, pressure differences and other pressures. Therefore, loose lining or spot welding additional lining is not satisfactory, but the titanium-steel clad plate can meet the above requirements. Titanium clad steel plates tube sheets are used not only in pressure vessels, heat exchangers and tubesheets, but also in the following applications: A. containers for municipal sewage treatment, which contain larger chloride. B. chemical distillation tanks for high temperature applications. C. water storage containers and containers for nuclear waste disposal

Product name:Gr7 Titanium dished Head Standard: ASME VIII-I, DIN28013 Material: GR1, GR2, GR7, GR12 Size: Customized Gr7 Titanium Hemispherical Head Dish-shaped head refers to the head composed of three parts: partial spherical shell, circular arc prayer side and good side (cylinder short treatment). Due to the abrupt change of radius of curvature at the junction between spherical shell and flanged edge, flanged edge and straight edge, the edge stress is much larger than the film stress caused by inner ash, and its mechanical properties are worse than that of spherical and elliptic head. Because of the shallow disc head, the requirements of stamping equipment and mold are low, so it is more convenient to manufacture. Rarely used in force vessels, only where pressure is low and a reduced head depth is required or where a die is lacking. The disc-shaped head is a continuous surface. The radius of curvature of the warp has a sudden change at the junction of three parts. As the curvature changes, there is bending stress. The result of the superposition of the bending stress and the tensile stress makes the stress in this part stand out from the other parts. Compared with the oval head, the stress distribution is not as uniform, but the machining is easier, so it is not ideal in engineering use. But when the mold processing of oval head is difficult, disc head is used instead. Size range: 50mm-10000mm with integral formed,larger sizes with subsection formed can be specified. Standard: ANSI, ASME ,MSS, API, DIN, JIS, BS,AWWA Thickness: 2mm-300mm Material: Titanium, titanium alloy Material grade:Grade 7 Application: mainly for pressure vessels and boilers in diverse industry such as oil, chemical,winery, pharmaceutical, environmental and military. Grade 7 (Ti-0.2Pd) titanium Chemical compositions(weight%,<=) Pd Al V Fe C 0.12-0.25 ---- ---- 0.30 0.08 N H O Other(total) Ti 0.05 0.015 0.2 0.4 Remainder Physical properties(>=) Σb Tensile Strength (Mpa) σr0.2 Yield Strength (Mpa) δL0+50mm Elongation (%) ψ Reduction of area (%) 370 250 20 25

Product Name: Gr12 Titanium Seamless Tube Standard: ASTM B337,ASTM B338,ASTM B861, ASTM B862 Material: Titanium Gr12 Unit Price: $25usd/kg-$40usd/kg Type: Welded/Seamless Shape: Round Outer Diameter: 3-508mm Wall Thickness: 0.1-20mm Length: Max 12000mm Surface: Bright Gr12 Titanium Seamless Tube Titanium tubes have been widely used in chemical, petroleum, petrochemical, vacuum salt making, preparation, marine engineering, electric power and other industries. Titanium is widely used in corrosive media due to its good corrosion resistance, such as ionic membrane caustic soda, propylene oxide, etc. titanium materials are widely used in equipment and pipelines. Product media are also used in formic acid, methane chloride and other projects to solve pipeline corrosion problems. Place of Origin:Shaanxi, China Material:ASTM B337,ASTM B338,ASTM B861, ASTM B862 Outer Diameter:3-508mm Wall Thickness:0.2-20mm Length:Max 15Meter Standard:ASTM B861 Application:Industrial Technique:Seamless Grade:Titanium Alloy Key Words:titanium tube Type:Titanium Round Tube Certificates:SO9001:2015 Processing:Drawing Surface:Bright Finished Shape:Round.square.Rectangle Package:plywood Case Titanium grade 12 pipe (Ti-0.3Mo-0.8Ni) Chemical compositions(weight%,<=) Mo Ni Fe C N 0.2-0.4 0.6-0.9 0.30 0.08 0.03 H O Ti Others Total 0.015 0.25 Remainder 0.10 0.40 Physical properties(>=) Σb Tensile Strength (Mpa) σr0.2 Yield Strength (Mpa) δL0+50mm Elongation (%) ψ Reduction of area (%) 440 345 18 ------- Titanium is widely used in chemical industry because of its high strength, light weight, good heat transfer performance and corrosion resistance. These characteristics of titanium make it a relatively economic method to solve engineering problems related to chemical industry. Although the investment cost of titanium is higher than that of general performance materials, titanium has been widely used in the chemical industry. According to the life cycle analysis, using it can reduce the production cost by reducing maintenance, shortening downtime, increasing product quality and increasing product life.

ladhani metal corporation is supplier and exporter of CSN 17248 sheet , plate , coil , flat bar , circular plate , plate flanges , farma , laser cutting design sheet , waterjet cutting design sheet.CSN 17248 is the basic austenitic 18/8 steel stabilised by Titanium or additions. These grades are used because they are not sensitive to intergranular corrosion after heating within the carbide precipitation range of 425-850°C.CSN 17248 is the grade of choice for applications in the temperature range of up to about 900°C, combining high strength, resistance to scaling and phase stability with resistance to subsequent aqueous corrosion. Our Domestic reach is unlimited and we supply to this following cities Ahmedabad, Amritsar, Aurangabad, Bangalore, Bhopal, Chandigarh, Chennai, Coimbatore, Dhanbad, Faridabad, Ghaziabad, Guwahati, Gwalior, Howrah, Hyderabad, Indore, Jabalpur, Jaipur, Jodhpur, Kanpur, Kolkata, Kota, Lucknow, Ludhiana, Madurai, Meerut, Mumbai, Nagpur, Nashik, Navi Mumbai, New Delhi, Patna, Pune, Raipur, Rajkot, Ranchi, Solapur, Srinagar, Surat, Thane, Vadodara, Varanasi, Vijayawada, Visakhapatnam, Hubballi, Tiruchirappalli, Bareilly, Moradabad, Mysore, Gurgaon, Aligarh, Jalandhar, Bhubaneswar We export to following Countries: Russia, Canada, United States, China, Brazil, Australia, Argentina, Kazakhstan, Algeria, Denmark, Saudi Arabia, Mexico, Indonesia, Iran, Mongolia, Peru, South Africa, Colombia, Ethiopia, Bolivia, Egypt, Venezuela, Turkey, Chile, Myanmar, France, Ukraine, Madagascar, Botswana, Kenya, Thailand, Spain, Sweden, Uzbekistan, Morocco, Paraguay, Zimbabwe, Norway, Japan, Germany, Republic of the Congo, Finland, Vietnam, Malaysia, Poland, Oman, Italy, Philippines, Ecuador, New Zealand, United Kingdom, Guinea, Uganda, Nepal, Bangladesh

Ladhani Metal Corporation offers SS 430 Boiler Half Round Tube Shields designed to protect straight boiler and heat exchanger tubes from erosion, oxidation, and high-temperature wear. Manufactured from ferritic stainless steel grade SS 430, these shields provide good corrosion resistance, excellent formability, and reliable thermal stability in moderately aggressive service environments. The shields are precision-formed into a half-round profile to match the curvature of standard boiler tubes, ensuring a secure fit and effective coverage. This design provides a physical barrier against soot blower impact, abrasive flue gas, and particulate erosion, extending the operational life of tubes and reducing maintenance costs. Ladhani Metal Corporation manufactures, supplies, and exports SS 430 Boiler Half Round Tube Shields in a wide range of lengths, diameters, and thicknesses, catering to both domestic and international markets. SS 430 Grade Chemical Composition – Ferritic Stainless Steel • Carbon (C): ≤ 0.12% • Manganese (Mn): ≤ 1.00% • Phosphorus (P): ≤ 0.040% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 16.0 – 18.0% • Nickel (Ni): ≤ 0.75% • Iron (Fe): Balance Applications: Ideal for power plants, WHRBs, HRSGs, and industrial boiler systems requiring protection in dry heat and oxidizing environments. Uses • Shields straight tubes in utility boilers and superheaters • Protects against flue gas erosion and surface scaling • Applied in WHRBs and HRSGs operating with clean or mildly corrosive gases • Suitable for industrial furnaces and heat recovery systems Features • Cost-effective protection – Combines durability with economic material choice • Oxidation resistance – Performs well in clean flue gas and dry heat conditions • Thermal reliability – Withstands repeated heating cycles without deformation • Precision fit – Formed to match tube diameter for secure installation • Flexible mounting – Can be clamped, banded, or tack welded • Export quality – Manufactured to meet international standards Applications • Thermal power stations – Guards steam and boiler tubes from scaling • Waste heat recovery boilers – Shields tubes in clean gas environments • Process heaters – Effective in less corrosive gas heating systems • Food and cement industries – Protects tubes from oxidation and moderate wear Conclusion The SS 430 Boiler Half Round Tube Shield from Ladhani Metal Corporation delivers cost-efficient and reliable protection for boiler tubes in dry heat and oxidizing service conditions. With good formability, corrosion resistance, and thermal performance, these shields are a practical solution for extending tube life and reducing operational downtime. Available in custom dimensions and export-ready specifications, they serve a wide range of industrial boiler applications worldwide. For detailed sizing, technical support, or export inquiries, contact Ladhani Metal Corporation. #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Salem #Erode #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Hassan #Cuttack #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Gaya #Muzaffarpur#halftubeshield #utypehalftubeshield #tubeshieldexporter #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier #SSShielding #IndustrialTubeShield #BoilerTubeGuard #CustomMetalParts #SteelIndustryIndia #MetalEngineering #HeavyIndustrySupply #StainlessSteelIndia #SteelExporters #MetalComponentExport #FabricatedProducts #SteelDealer #IndustrialSupplyIndia #BoilerTubeFittings #TubeShieldingSolutions #HalfTubeCover #HeatExchangerShield