'furnaces due'

Ladhani Metal Corporation offers 1Cr25Ni20Si2 Half Round Tube Shields designed for the protection of boiler tubes in reheater, superheater, and waste heat recovery sections. Manufactured from high-performance heat-resistant alloy grade 1Cr25Ni20Si2, these shields offer superior high-temperature strength, excellent oxidation resistance, and enhanced service life in extreme boiler environments. The addition of silicon improves oxidation resistance and thermal stability, making them suitable for long-term use in aggressive furnace conditions. Function of Boiler Tubes • Carry water or steam through critical heating sections of the boiler • Continuously exposed to scaling, erosion, and oxidation from hot flue gases • Protected with Half Round Tube Shields in erosion-prone and soot blower impact zones Ladhani Metal Corporation manufactures, supplies, and exports 1Cr25Ni20Si2 Half Round Tube Shields in multiple lengths, diameters, and thicknesses, tailored to domestic and international requirements. 1Cr25Ni20Si2 Grade Chemical Composition – Heat Resistant Alloy Steel • Carbon (C): ≤ 0.20% • Manganese (Mn): ≤ 1.50% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.030% • Silicon (Si): 1.00 – 2.00% • Chromium (Cr): 24.00 – 26.00% • Nickel (Ni): 19.00 – 22.00% • Iron (Fe): Balance Applications: Ideally suited for reheater and superheater sections of thermal power plants, waste heat recovery boilers, HRSGs, petrochemical heaters, and other industrial furnaces operating at high temperatures under oxidizing and erosive conditions. Uses • Shields boiler tubes from high-temperature oxidation, erosion, and scaling • Protects reheater and superheater tubes against soot blower wear • Extends service life of critical boiler tube components in thermal plants • Commonly applied in WHRBs, HRSGs, and petrochemical processing units Features • Excellent oxidation and scaling resistance at elevated temperatures • High thermal stability due to silicon addition in the alloy • Strong creep resistance for long-term boiler service • Accurate fit and easy installation to cover high-wear tube surfaces Applications • Power generation boilers – Protection for tubes in reheater and superheater zones • Waste heat recovery boilers – Guards against erosive and high-temperature gases • Industrial steam plants – Ensures extended tube life under severe thermal cycling • Petrochemical heaters – Reliable in corrosive and oxidizing service environments Conclusion The 1Cr25Ni20Si2 Half Round Tube Shield for Boiler Tubes by Ladhani Metal Corporation delivers durable, high-temperature protection against erosion, oxidation, and scaling in the harshest boiler conditions. With superior thermal stability and long service life, these shields reduce downtime and extend equipment reliability. Available in export-ready sizes and specifications, they are trusted worldwide for demanding boiler and furnace applications. For supply and technical inquiries, contact Ladhani Metal Corporation. #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Muzaffarpur#halftubeshield #utypehalftubeshield #tubeshieldexporter #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier #SSShielding #IndustrialTubeShield #BoilerTubeGuard #CustomMetalParts #SteelIndustryIndia #MetalEngineering #HeavyIndustrySupply #StainlessSteelIndia #SteelExporters #MetalComponentExport #FabricatedProducts #SteelDealer #IndustrialSupplyIndia #BoilerTubeFittings #TubeShieldingSolutions #HalfTubeCover #HeatExchangerShield #HalfRoundReheaterShield #ReheaterTubeShield #BoilerReheaterProtection #PowerPlantTubeShield #BoilerErosionShield #SteamBoilerTubeShield #HighTempTubeShield #BoilerWearProtection

Product Name: Titanium dished disk for anodizing Material: Grade 2 Application: Electroplating, anodizing etc. Size: Customized Surface: Polished These circles are made of good quality pure titanium. Combining 1 ″ titanium shaft and copper hook, maximize the required time, part of the rack, and maximize the space. Titanium can be reused, with long service life and strong corrosion resistance, making it a better choice than any aluminum shelf. It can also better connect parts, even anodize, and even absorb dyes. The discs are 220mm,250mm or 270mm diameters and mounted on a 1"(25mm) shaft. There are different shape discs,such as spine disc,split finger disc,dished disc etc. It is recommended that you clean and / or degrease this product before using it. 1. Material: pure titanium (Gr2) 2. MOQ: 10 pieces 3. Specification: customized 4. Application: anodizing, heating parts 5. Production and processing: stamping and welding Features of Titanium Dished Disk For Anodizing: a. We use acid resistant titanium material, and the hook of the contact part of the conductive rod is made of the best red copper material. b. The current can pass freely without overheating and burning components due to too small section and too large resistance. c. The contact area with parts is small, and the contact parts will not produce local overheating and part combustion. d. For parts that cannot be hitched in general, in order to ensure product quality and improve production efficiency, special hitching fixtures can be designed and manufactured according to the shape of parts. Chemical composition (Wt%) ASTM No. Fe max O max N max C max H max Pd Al Bal Grade 2 0.3 0.25 0.03 0.1 0.015 - - Ti Physical Properties (Min) ASTM Grade Alloy Composition Tensile Strength Yield Strength Elongation min % ksi Mpa ksi Mpa

Product Name: Titanium Bar Standard: ASTM B348 Material: GR1, GR2, GR5, GR7, GR12 Shape: Round, Square, Flat, Hex Diameter: 6-350mm Length: Max 6000mm Surface: Bright TC11 Titanium Alloy Bar As an important material for aerospace, TC11 is an α+β dual-phase titanium alloy with the phasetransfer temperature between 998 and 1020°C. Due to its excellent properties (such as high strength and fatigue resistance), it has become an ideal material to produce aircraft engine parts. TC11 titanium alloy under 300°C/5000 h has good microstructure and performance stability, different temperature transient high-temperature properties, such as tensile, creep and lasting, and double annealing and isothermal annealing. Through the normal annealing treatment of semi-finished products of TC11 titanium alloy, it can meet the requirements of aircraft structure temperature (below 300°C). Product Information Grade: GR1, GR2, GR4, GR5, GR7, GR12, GR23, TC11, TC21 Russian Grade: BT1-00,BT1-0,BT1-2, BT9, BT22 Standard: ASTM B348, AMS 4928, ASTM F67,ASTM F136 Diameter: 3-350mm Length: up to 6000mm Surface: Polished, Pickled Features: Polished surface with no defects, no cracks and no pitting. Chemical compositions(weight%,<=) Al Sn Mo Zr Si Fe C 5.8-7.0 -- 2.8-3.8 0.8-2.0 0.2-0.35 0.25 0.08 N H O Other(total) Ti 0.05 0.012 0.15 0.4 Remainder Physical properties(>=) Σb Tensile Strength (Mpa) σr0.2 Yield Strength (Mpa) δL0+50mm Elongation (%) ψ Reduction of area (%) 1030 900 10 30 Advantages 1. Price: As a leading manufacturer of titanium products, we have a history of more than 16 years and we know the market very well, so competitive prices can be offered. 2. Equipment: We have annealing furnaces, forging hammers, milling machines, straightening machines, shearing machines, trimming machines, punching machines, sandblasting machines etc. 3. Quality: Our titanium rods are sold to many countries. Our product is widely recognized. MTC, like EN10204.3.1, is available. Third-party test, such as TUV, SGS, BV etc., is also acceptable. 4. Shipment: Various modes of shipping. EXW, FOB, CIF etc. are all ok for us.

Ladhani Metal Corporation offers Cr25Ni20 Outer Half Round 90 Degree Bend Tube Shields engineered to safeguard the outer arc of U-bends and 90-degree curved tubes in high-temperature industrial systems such as boilers, heat exchangers, superheaters, and reheaters. The half-round shield is precision-formed to match the curvature of return tube bends, creating a robust physical barrier against erosive flue gas, particulate impact, and mechanical wear from soot blowing. Cr25Ni20 shields are especially suited for utility boilers, incinerators, petrochemical heaters, and waste heat recovery units operating under aggressive thermal and oxidizing conditions. Ladhani Metal Corporation is a reputed manufacturer, supplier, and exporter of Cr25Ni20 Outer Half Round 90 Degree Bend Tube Shields, offering customized configurations for optimal fit and performance. Cr25Ni20 Grade Chemical Composition – Austenitic Stainless Steel • Carbon (C): ≤ 0.10% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.50% • Chromium (Cr): 24.0 – 26.0% • Nickel (Ni): 19.0 – 22.0% • Iron (Fe): Balance Uses • Shields 90-degree return bends in radiant sections of superheaters and reheaters • Applied in HRSGs, waste heat boilers, and incinerators under severe temperature conditions • Guards against metal loss due to flue gas erosion and thermal cycling • Suitable for tube bends in high-temperature reformers, furnaces, and gas processing units Features • Outstanding heat resistance – Performs reliably at sustained temperatures above 1000°C • Excellent oxidation and scaling resistance – Protects metal surfaces in oxidizing and carburizing atmospheres • Long service life – High alloy content ensures resistance to metal fatigue and thermal stress • Tailored fit – Fabricated to match various tube bend radii and dimensions • Flexible installation – Can be clamped, tack welded, or banded based on site requirements • Wide availability – Offered in diverse lengths, wall thicknesses, and bend angles Applications • Power plants – Protects reheater and superheater tube bends in extreme heat zones • Waste incineration plants – Shields tubes from ash erosion and corrosive gas attack • Petrochemical and refinery sectors – Applied in high-temperature fired heaters and steam reformers • Metal and glass industries – Protects furnace coils and curved tubes from high-temperature damage Conclusion The Cr25Ni20 Outer Half Round 90 Degree Bend Tube Shield by Ladhani Metal Corporation offers superior protection for tube bends exposed to intense heat, oxidation, and thermal cycling. With high alloy stability and long-term performance in extreme environments, these shields are ideal for critical thermal processing systems. For custom dimensions, application-specific material advice, or product inquiries, contact Ladhani Metal Corporation. #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Salem #Erode #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Hassan #Cuttack #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Gaya #Muzaffarpur #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier #SSShielding #IndustrialTubeShield #BoilerTubeGuard #CustomMetalParts #SteelIndustryIndia #MetalEngineering #HeavyIndustrySupply #StainlessSteelIndia #SteelExporters #MetalComponentExport #FabricatedProducts #SteelDealer #IndustrialSupplyIndia #BoilerTubeFittings #TubeShieldingSolutions #HalfTubeCover #HeatExchangerShield #halftubeshield #utypehalftubeshield #tubeshieldexporter

Ladhani Metal Corporation offers 1Cr18Ni9Ti Outer Half Round 90 Degree Bend Tube Shields designed to protect the outer curvature of U-bends and 90-degree tube turns in boilers, heat exchangers, superheaters, and reheaters. Manufactured from the austenitic stainless steel grade 1Cr18Ni9Ti (equivalent to AISI 321), these shields provide excellent corrosion resistance, high-temperature strength, and resistance to intergranular corrosion. The semi-cylindrical geometry is precision-engineered to conform to the return bends of tubes, offering reliable protection from erosion due to flue gas velocity, soot blower blasts, and ash impingement. 1Cr18Ni9Ti shields are commonly used in high-temperature steam generation systems, including power plants and industrial thermal processing units, where durability under oxidizing and slightly corrosive conditions is critical. Ladhani Metal Corporation is a leading manufacturer, supplier, and exporter of 1Cr18Ni9Ti Outer Half Round 90 Degree Bend Tube Shields, providing tailored solutions to meet specific plant configurations and thermal requirements. 1Cr18Ni9Ti Grade Chemical Composition – Austenitic Stainless Steel • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 17.0 – 19.0% • Nickel (Ni): 9.0 – 12.0% • Titanium (Ti): ≥ 5 x C content • Iron (Fe): Balance Uses • Protection of 90-degree return bends in superheaters and reheaters • Suitable for HRSG and WHRB applications in gas turbine and industrial waste heat recovery • Shields tube bends from scaling, oxidation, and erosive flue gas flow • Applied in furnaces and process heaters requiring long-term thermal stability Features • Superior corrosion resistance – Performs reliably in oxidizing and mildly corrosive environments • High thermal stability – Maintains structural integrity in elevated temperature conditions • Intergranular corrosion resistance – Titanium stabilization prevents carbide precipitation • Accurate fit – Formed to match specific bend radii and tube sizes for maximum protection • Easy installation – Supports clamping, welding, or banding as per site requirements • Available variants – Offered in multiple lengths, wall thicknesses, and diameters for precise application Applications • Power generation – Protects boiler tube bends in high-temperature steam lines • Petrochemical industries – Ensures thermal integrity in fired heaters and reformers • Industrial boilers – Guards against erosion and scaling in heat recovery systems • Cement and metallurgical plants – Used in tube bends of heat exchangers and gas coolers Conclusion The 1Cr18Ni9Ti Outer Half Round 90 Degree Bend Tube Shield by Ladhani Metal Corporation delivers high-performance protection for boiler and furnace tube bends operating under high heat and oxidizing conditions. With excellent corrosion resistance, thermal reliability, and formability, it is a robust and long-lasting solution for demanding environments. For customized configurations, technical assistance, or material consultation, contact Ladhani Metal Corporation. #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Salem #Erode #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Hassan #Cuttack #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Gaya #Muzaffarpur #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier #SSShielding #IndustrialTubeShield #BoilerTubeGuard #CustomMetalParts #SteelIndustryIndia #MetalEngineering #HeavyIndustrySupply #StainlessSteelIndia #SteelExporters #MetalComponentExport #FabricatedProducts #SteelDealer #IndustrialSupplyIndia #BoilerTubeFittings #TubeShieldingSolutions #HalfTubeCover #HeatExchangerShield #halftubeshield #utypehalftubeshield #tubeshieldexporter

Half Round Tube Shield Ladhani Metal Corporation manufactures high-quality Half Round Tube Shields designed to protect boiler tubes from erosion, corrosion, and mechanical wear in heat transfer systems. These shields are precisely engineered to fit the curvature of boiler tubes, especially in areas exposed to flue gas turbulence and ash impact. The half-round design allows for easy installation and ensures consistent protection throughout the tube's operating life. Cr23Ni13 Half Round Tube Shield for LTSH Tube The Cr23Ni13 Half Round Tube Shield is fabricated using a high-temperature-resistant chromium-nickel alloy containing approximately 23% chromium and 13% nickel. This composition provides excellent resistance to oxidation, thermal shock, and high-temperature corrosion. It is particularly suited for shielding LTSH (Low Temperature Superheater) tubes that operate in areas where flue gases carry abrasive particles, resulting in gradual material degradation over time. The Low Temperature Superheater (LTSH) is a section in a boiler where saturated steam from the steam drum is superheated to a moderately higher temperature before entering the high-temperature superheater stages. Positioned in areas with relatively lower flue gas temperatures, the LTSH helps improve thermal efficiency and reduces moisture content in steam. Due to constant exposure to abrasive flue gases and ash, LTSH tubes are prone to wear and require protective shielding, such as half round tube shields, to extend service life. Ladhani Metal Corporation is a reliable manufacturer, supplier, and exporter of Cr23Ni13 Half Round Tube Shields, delivering robust and thermally stable components for boiler protection applications in demanding industrial conditions. Chemical Composition of Cr23Ni13 – High Chromium-Nickel Heat-Resistant Steel • Carbon (C): ≤ 0.10% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 22.0 – 24.0% • Nickel (Ni): 12.0 – 14.0% • Iron (Fe): Balance Applications: Ideal for high-temperature zones in boilers and furnaces where oxidation, scaling, and ash corrosion pose operational challenges. Uses • Protects LTSH tubes in coal-fired and biomass-fired boilers • Shields heat exchanger tubes in waste heat recovery units • Provides erosion and oxidation resistance in process heaters and reformers • Installed in utility and industrial boilers to prevent wear from low-temperature flue gases • Suitable for use in marine, chemical, and refining industries where steam purity and thermal efficiency are critical Features • High-temperature resistance – Excellent durability under thermal cycling conditions • Corrosion protection – Chromium-rich alloy protects against oxidizing flue gases • Precision fabrication – Custom-fit designs ensure secure coverage of exposed tube surfaces • Enhanced tube longevity – Reduces surface wear, scaling, and thermal fatigue • Multiple installation methods – Supports weld-on, clamp-on, or banding attachment options • Customizable dimensions – Lengths, thicknesses, and radii can be tailored for system compatibility Applications • thermal power stations – Extends the life of LTSH coil sections in superheaters and economizers • WHRBs – Provides protective coverage for tubes exposed to particulate-laden exhaust gases • process industries – Ideal for exchangers and preheaters in refineries and petrochemical plants • HRSGs – Shields low-temperature superheater zones in combined-cycle power systems • cement and paper plants – Protects heat transfer surfaces from soot and particulate erosion Conclusion The Cr23Ni13 Half Round Tube Shield for LTSH Tube by Ladhani Metal Corporation – manufacturer, supplier, and exporter – offers a reliable and thermally robust solution for protecting superheater and heat exchanger tubes in abrasive and corrosive environments. Its high chromium-nickel composition ensures long-lasting performance in boiler systems where operational efficiency and tube integrity are critical. For orders, technical specifications, or consultation, contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are high-strength protective components used to shield boiler tubes, superheaters, and heat exchanger coils from ash impact, flue gas erosion, scaling, and corrosion. These shields are commonly used in thermal power plants, steam generating systems, and industrial boilers to protect tube surfaces and reduce wear in critical heat transfer zones. Their half-round profile is designed for easy installation and secure fitment over curved or straight tubes exposed to mechanical or thermal stress. SS 420 Half Round Tube Shield for LTSH Tube The SS 420 Half Round Tube Shield is manufactured from martensitic stainless steel grade 420, which is known for its high hardness, good oxidation resistance, and moderate corrosion protection. This material provides excellent wear resistance in abrasive and dry flue gas environments. It is particularly suitable for Low Temperature Superheater (LTSH) applications, where tubes are exposed to fly ash erosion, gas turbulence, and mechanical abrasion at relatively lower temperatures. SS 420 is often used where durability and strength are more critical than corrosion resistance alone. The Low Temperature Superheater (LTSH) is a section in a boiler where saturated steam from the steam drum is superheated to a moderately higher temperature before entering the high-temperature superheater stages. Positioned in areas with relatively lower flue gas temperatures, the LTSH helps improve thermal efficiency and reduces moisture content in steam. Due to constant exposure to abrasive flue gases and ash, LTSH tubes are prone to wear and require protective shielding, such as half round tube shields, to extend service life. Ladhani Metal Corporation is a leading manufacturer, supplier, and exporter of SS 420 Half Round Tube Shields for LTSH applications, offering reliable protection where mechanical wear and gas erosion are of primary concern. Chemical Composition of SS 420 – Martensitic Stainless Steel • Carbon (C): 0.15 – 0.40% • Manganese (Mn): ≤ 1.00% • Phosphorus (P): ≤ 0.040% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 12.0 – 14.0% • Iron (Fe): Balance Applications: Best suited for dry ash, solid particulate flow, and mildly oxidizing environments in low-temperature superheater sections of boilers and industrial furnaces. Uses • Installed on LTSH tubes to protect from fly ash abrasion and soot erosion in power boilers • Shields return bends and tube banks in HRSGs and WHRBs exposed to turbulent flue gases • Used in biomass and coal-fired boilers to prevent mechanical wear and scaling on heat transfer tubes • Suitable for zones with high solid particle velocity and moderate corrosion risk • Effective in industrial and utility boilers that operate with abrasive fuels or in dry environments Features • High surface hardness – Excellent resistance to erosion, impact, and abrasion • Moderate oxidation resistance – Performs well in clean, oxidizing gas atmospheres • Precision fitment – Custom-shaped to match tube radius and curvature for secure shielding • Simple installation – Compatible with welding, clamping, or banding methods • Cost-efficient durability – Provides long service life in mechanical wear zones • Offered in varied lengths, thicknesses, and tube diameters based on application needs Applications • thermal power plants – Installed on LTSH tubes to minimize erosion and extend operational life • waste heat recovery units – Protects lower temperature coils from particulate-laden gas streams • coal-fired boilers – Shields convection sections exposed to ash and fly particles • steam generation systems – Guards heat transfer surfaces in dry, abrasive environments • biomass plants – Prevents wear from ash and unburned particulates in combustion zones Conclusion The SS 420 Half Round Tube Shield for LTSH Tube by Ladhani Metal Corporation – manufacturer, supplier, and exporter – offers strong mechanical protection and erosion resistance for superheater and boiler tubes operating in low-temperature, abrasive environments. Designed for durability and precision fit, it enhances tube longevity and system performance in thermal applications where particulate damage is a concern. For product specifications, custom sizes, or technical assistance, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are engineered to protect heat exchanger, boiler, and superheater tubes from erosion, thermal scaling, and high-temperature corrosion. These shields are widely used in power plants, petrochemical systems, and high-temperature industrial equipment where tubes are exposed to direct flame, turbulent gas flow, and particulate matter. Their half-round shape ensures easy installation over curved or straight tube surfaces, providing an effective layer of protection without the need for equipment disassembly. SS 310S U Type Inner Half Round Tube Shield The SS 310S U Type Inner Half Round Tube Shield is made from stainless steel grade 310S, a low-carbon variant of SS 310. It offers excellent resistance to oxidation and high-temperature corrosion while providing improved weldability and reduced risk of sensitization during thermal cycling. This inner U-type shield is specifically designed to cover the inside arc of U-bend tubes, an area commonly affected by accelerated wear due to turbulence, heat concentration, and gas flow deflection. • Inner U Type Half Round Tube Shield – Designed to protect the inner curvature of U-bend tubes from erosion, slag buildup, and oxidation caused by high-velocity gas flow and thermal cycling. Ladhani Metal Corporation is a recognized manufacturer, supplier, and exporter of SS 310S U Type Inner Half Round Tube Shields, providing tailored solutions for heat-exposed systems in demanding industrial environments. Chemical Composition of SS 310S – Low Carbon Austenitic Stainless Steel • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.50% • Chromium (Cr): 24.0 – 26.0% • Nickel (Ni): 19.0 – 22.0% • Iron (Fe): Balance Applications: Best suited for oxidizing and high-temperature environments where welded structures are used and resistance to thermal fatigue is critical. Uses • Inner arc shielding for U-bend tubes in high-temperature boilers and superheaters • Installed in the return bends of HRSGs and waste heat recovery boilers (WHRBs) • Used in curved sections of heat exchangers exposed to combustion gases and fluctuating heat • Protects tube bends in petrochemical reactors, reformers, and process furnaces • Ideal for inner arc protection in high-temperature flue gas zones and incinerator coils Features • Excellent high-temperature oxidation resistance – Effective performance in environments up to 1050°C • Low carbon content – Reduces risk of intergranular corrosion after welding or extended service • Focused protection – Shields the inner bend surface most prone to gas turbulence and scaling • Accurate fitment – Custom-fabricated to match specific tube sizes and radii for optimal coverage • Fast installation – Can be securely mounted using stainless steel clamps, bands, or welds • Reliable performance – Enhances the lifespan of U-bend tubes and minimizes maintenance in heat-affected areas Applications • power plants – Used on U-bend inner surfaces in superheaters and reheaters to resist scale and corrosion • petrochemical industry – Shields inside tube arcs in reformers and exchangers exposed to hot process gases • waste heat systems – Protects internal tube bends in WHRBs and HRSGs from slag and thermal fatigue • chemical plants – Provides corrosion protection for return bends in reactors and condensers • high-temperature industrial units – Installed in curved tube coils subjected to flame exposure and oxidizing gases Conclusion The SS 310S U Type Inner Half Round Tube Shield by Ladhani Metal Corporation – manufacturer, supplier, and exporter – is a dependable, high-temperature protective solution for shielding the inner arc of U-bend tubes. With its excellent oxidation resistance, low carbon content, and suitability for welded environments, this shield is ideal for critical systems operating under thermal stress and corrosive gas flow. For technical consultation, custom fabrication, or quotations, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are precision-engineered solutions designed to protect boiler, superheater, and heat exchanger tubes from erosion, scaling, slag buildup, and high-temperature corrosion. These shields are widely used in systems that operate under extreme thermal and mechanical stress, particularly in industries such as power generation, petrochemical processing, and waste heat recovery. The half-round design ensures easy and secure installation over straight or curved tube surfaces, helping to extend service life and reduce operational downtime. SS 304 U Type Inner Half Round Tube Shield The SS 304 U Type Inner Half Round Tube Shield is manufactured from austenitic stainless steel grade 304, which contains chromium and nickel as its primary alloying elements. This grade offers a combination of good corrosion resistance, oxidation resistance, and mechanical strength. The inner U-type configuration is specifically designed to cover the inner arc of U-bend tubes in boilers and heat exchangers, an area that typically experiences accelerated wear due to flue gas turbulence, scaling, and heat stress. • Inner U Type Half Round Tube Shield – Shields the internal curvature of U-bend tubes from corrosion, turbulent flow-induced erosion, and thermal scaling. Ladhani Metal Corporation is a reliable manufacturer, supplier, and exporter of SS 304 U Type Inner Half Round Tube Shields, delivering durable and cost-effective shielding for critical industrial applications. Chemical Composition of SS 304 – Austenitic Stainless Steel • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 18.0 – 20.0% • Nickel (Ni): 8.0 – 11.0% • Iron (Fe): Balance Applications: Ideally suited for clean to mildly corrosive environments, including thermal and chemical plants where moderate oxidation and corrosion resistance is needed under elevated temperatures. Uses • Inner surface protection for U-bend tubes in superheaters and reheaters exposed to turbulent gas flow • Applied in return bends of waste heat recovery boilers (WHRBs) and HRSGs • Installed in curved sections of heat exchangers, steam reformers, and process heaters • Suitable for flue gas ducts, evaporators, and condensers with moderate thermal cycling • Used in chemical and refining systems where steam and mildly acidic gases are present Features • Good corrosion and oxidation resistance – Suitable for a broad range of service conditions • Inner arc coverage – Protects the inner bend area from scaling and erosion caused by turbulent flue gases • Durable performance – Offers dependable protection at temperatures up to 870°C • Precise fit – Fabricated to match the exact bend radius and tube dimensions for a secure installation • Easy mounting – Can be installed using clamps, stainless steel banding, or tack welding • Cost-effective solution – Provides a balance of performance, longevity, and affordability for standard industrial applications Applications • thermal power plants – Used in inner U-bends of superheaters and economizers to minimize scaling and erosion • petrochemical industries – Shields inside tube curves exposed to combustion gases and steam • waste heat systems – Protects internal arcs of curved tubes in WHRBs and HRSGs from slag and heat damage • chemical and refinery plants – Provides resistance against moderate levels of corrosion in return bends • industrial heating systems – Ensures extended tube life in furnaces, heat exchangers, and flue gas systems Conclusion The SS 304 U Type Inner Half Round Tube Shield by Ladhani Metal Corporation – manufacturer, supplier, and exporter – is a practical and reliable solution for protecting the inner arc of U-bend tubes in moderate to high-temperature industrial environments. With its balance of corrosion resistance, mechanical durability, and ease of installation, this shield is ideal for a wide range of power and process industry applications. For technical consultation, custom sizes, or quotations, please contact Ladhani Metal Corporation.