Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are designed to provide surface protection for boiler tubes, superheaters, and heat exchangers from erosion, slag deposition, and thermal wear. These shields are commonly used in low temperature superheaters (LTSH), economizers, and coil sections in power plants and industrial heating systems. Their half-round profile allows quick installation on exposed tube surfaces, ensuring prolonged tube service life and reduced maintenance frequency. SS 304 Half Round Tube Shield for LTSH Tube The SS 304 Half Round Tube Shield is manufactured from austenitic stainless steel grade 304, which offers excellent corrosion resistance, good mechanical strength, and thermal stability. Designed specifically for LTSH (Low Temperature Super Heater) applications, it protects the exposed surfaces of tubes from low-temperature corrosion, soot erosion, and gas flow damage. The shield is precisely fabricated to match the outer diameter of LTSH tubes, enabling a tight and reliable fit. The Low Temperature Superheater (LTSH) is a section in a boiler where saturated steam from the steam drum is superheated to a moderately higher temperature before entering the high-temperature superheater stages. Positioned in areas with relatively lower flue gas temperatures, the LTSH helps improve thermal efficiency and reduces moisture content in steam. Due to constant exposure to abrasive flue gases and ash, LTSH tubes are prone to wear and require protective shielding, such as half round tube shields, to extend service life. Ladhani Metal Corporation is a leading manufacturer, supplier, and exporter of SS 304 Half Round Tube Shields for LTSH applications, delivering durable and performance-oriented shielding solutions for thermal power and industrial process systems. Chemical Composition of SS 304 – Austenitic Stainless Steel • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 18.0 – 20.0% • Nickel (Ni): 8.0 – 10.5% • Iron (Fe): Balance Applications: Ideal for low-temperature zones in superheaters, economizers, and other heat exchange systems exposed to gas flow, corrosion, and mild scaling. Uses • Installed on LTSH tubes in power plant boilers to protect from low-temperature flue gas corrosion • Shields exposed tube sections in economizers, air preheaters, and convection coil banks • Used in heat exchangers and process heaters operating in mildly corrosive and low thermal environments • Suitable for protection in industrial boilers and steam generation systems • Applied in thermal units where soot, slag, or flue gas turbulence causes mechanical surface wear Features • Excellent corrosion resistance – Resists oxidation, acidic gas exposure, and low-temperature fouling • Custom fit – Fabricated to match the exact diameter and length of LTSH tubes • Easy installation – Can be mounted using clamp-on, tack welding, or banding methods • Moderate thermal stability – Maintains structural integrity in low to moderate heat zones • Reduces maintenance – Prevents erosion and pitting, extending tube service life • Available in various lengths, wall thicknesses, and radii as per system specifications Applications • thermal power plants – Installed on LTSH tube banks to guard against flue gas corrosion and surface damage • industrial steam systems – Shields exposed superheater and reheater tube sections • waste heat recovery – Used in lower temperature zones of WHRBs and HRSGs • chemical plants – Provides surface protection in convection and heating coils exposed to process gases • boiler maintenance – Ideal for tube protection during retrofits, upgrades, or preventive maintenance Conclusion The SS 304 Half Round Tube Shield for LTSH Tube by Ladhani Metal Corporation – manufacturer, supplier, and exporter – offers dependable and corrosion-resistant protection for tubes in low-temperature superheater applications. With excellent mechanical and chemical performance, this shield ensures efficient operation and extended tube life in a wide range of thermal and industrial systems. For custom dimensions, technical support, or pricing, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are engineered to provide robust protection for boiler, superheater, and heat exchanger tubes against high-temperature erosion, slag deposition, scaling, and corrosive gas exposure. These shields are essential in power plants, petrochemical systems, and high-heat industrial environments where tubes are vulnerable to rapid degradation due to thermal cycling and particulate flow. The half-round design ensures quick installation over curved or straight tube sections without system disassembly. U Type Inner Half Round Tube Shield The U Type Inner Half Round Tube Shield is specially designed to protect the inner curvature of U-bend tubes, which often experiences high levels of turbulence, localized corrosion, and scaling due to gas redirection and mechanical stress. Inner shields are commonly paired with outer shields for full bend protection and are manufactured in a wide range of stainless steel and high-temperature alloy grades, customized to specific environmental and system requirements. Ladhani Metal Corporation is a trusted manufacturer, supplier, and exporter of U Type Inner Half Round Tube Shields in various material grades, offering tailored protection solutions for high-temperature and corrosive conditions across multiple industries. Available Grades • SS 304 – General-use stainless steel with good corrosion and heat resistance • SS 304L – Low-carbon version for improved weldability and reduced carbide precipitation • SS 316 – Molybdenum-added alloy with excellent resistance to pitting and chlorides • SS 316L – Low-carbon alternative for superior corrosion resistance in welded environments • SS 310 – Austenitic high-temperature steel with excellent oxidation resistance • SS 310S – Low-carbon SS 310 for better thermal fatigue performance • SS 410 – Martensitic stainless steel with good strength and abrasion resistance • SS 420 – High-hardness martensitic grade ideal for erosion-prone zones • SS 430 – Ferritic grade for moderate corrosion and oxidation resistance • 1Cr13 – Martensitic stainless steel offering mechanical protection and heat resistance • 1Cr18Ni9Ti – Titanium-stabilized grade offering resistance to intergranular corrosion • Cr23Ni13 – High-temperature alloy with excellent oxidation and scaling resistance • Cr25Ni20 – High-performance grade for extreme thermal and oxidizing conditions • 1Cr25Ni20Si2 – Heat-resistant alloy with silicon for improved scale resistance • 1Cr20Ni14Si2 – Alloy for thermal fatigue protection and oxidizing environments Applications • Inner arc protection in U-bend tubes of boilers, superheaters, and reheaters • Shielding internal curves of tubes in waste heat recovery boilers (WHRBs) and HRSGs • Corrosion and scale defense for inner tube arcs in petrochemical and steam reforming units • Inner surface protection in furnace coils, reformers, and incinerators • Installed in chemical plants and thermal systems prone to turbulent flue gas exposure Features • Focused inner arc protection – Guards the most corrosion- and scale-prone surface of U-bend tubes • Material flexibility – Available in multiple grades for varied thermal, mechanical, and chemical requirements • Excellent thermal resistance – Withstands extreme temperatures depending on material (up to 1150°C+) • Precise fit – Custom-fabricated to match exact tube dimensions and bend radii • Simple installation – Mounted using clamps, stainless bands, or welding techniques • Dual-shield pairing – Can be combined with outer shields for complete U-bend coverage • Long-lasting performance – Enhances tube reliability and reduces maintenance in high-wear zones Applications • power generation – Protects U-bend inner surfaces in superheaters and economizers from flue gas turbulence • petrochemical plants – Shields inside arcs in reformers and heaters exposed to chlorides and acidic gases • waste heat systems – Installed in HRSGs and WHRBs to prevent slag and oxidation on internal bends • chemical industries – Suitable for reactors and high-temperature exchangers handling corrosive media • cement and metallurgy – Used in systems exposed to flame, dust, and oxidizing atmospheres Conclusion The U Type Inner Half Round Tube Shield by Ladhani Metal Corporation – manufacturer, supplier, and exporter – is a precision-engineered solution for protecting the inner arc of U-bend tubes against corrosion, scale formation, and thermal damage. Available in a wide range of stainless steels and high-temperature alloys, these shields provide durable, customizable, and easy-to-install protection for critical components in power, chemical, and thermal processing systems. For custom sizes, technical assistance, or quotations, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are essential components engineered to protect boiler, superheater, reheater, and heat exchanger tubes from high-temperature damage, erosion, slag buildup, and corrosion. These shields are commonly used in thermal power plants, petrochemical systems, waste heat recovery units, and high-temperature industrial processes where curved tube sections are frequently exposed to hot flue gases and particulate-laden flow. The half-round shape ensures quick installation and effective protection without dismantling the tube system. U Type Outer Half Round Tube Shield The U type outer half round tube shield is specifically designed to cover and protect the outer arc of U-bend tubes — the area most vulnerable to heat, gas erosion, flame impingement, and slag accumulation. These shields are manufactured in a wide variety of stainless steel and heat-resistant alloy grades to meet specific temperature, corrosion, and wear resistance requirements across various industries. Ladhani Metal Corporation is a leading manufacturer, supplier, and exporter of U type outer half round tube shields in a full range of grades, offering precise fitment, durability, and reliable protection for curved tubes operating in extreme service environments. Available Grades • SS 304 – General-purpose stainless steel with good resistance to oxidation and moderate corrosion • SS 304L – Low-carbon version of SS 304 for better weldability and intergranular corrosion resistance • SS 316 – Molybdenum-enhanced alloy for superior resistance to chloride pitting and chemical corrosion • SS 316L – Low-carbon variant of SS 316 for enhanced corrosion resistance in welded conditions • SS 310 – High-temperature austenitic stainless steel with excellent oxidation resistance • SS 310S – Low-carbon SS 310 version suitable for thermal cycling and stress-resistance • SS 410 – Martensitic stainless steel with good mechanical strength and wear resistance • SS 420 – High-hardness martensitic steel for erosion-prone environments • SS 430 – Ferritic stainless steel suitable for mild oxidizing conditions and cost-effective applications • 1Cr13 – Martensitic stainless steel ideal for mechanical protection and moderate corrosion resistance • 1Cr18Ni9Ti – Titanium-stabilized alloy resistant to intergranular corrosion and heat stress • Cr23Ni13 – Austenitic heat-resistant alloy with excellent scaling and oxidation resistance • Cr25Ni20 – High-alloy grade for extreme heat and corrosive gas exposure • 1Cr25Ni20Si2 – Silicon-enhanced alloy for high-temperature stability and anti-scaling performance • 1Cr20Ni14Si2 – High-temperature grade with superior thermal fatigue and oxidation resistance Applications • Protection of U-bend outer arcs in superheaters and reheaters of thermal power plants • Shielding of curved tube sections in waste heat recovery boilers (WHRBs) and HRSGs • Flame-side defense for tube bends in petrochemical heaters, steam reformers, and exchangers • Slag and soot protection in return bends of industrial furnaces, incinerators, and kilns • Coverage for U-bend tubes in chemical and refinery plants exposed to acidic or oxidizing gases Features • Full outer arc coverage – Shields the most heat-exposed and erosion-prone section of U-bend tubes • Grade versatility – Available in multiple material options for specific temperature and corrosion demands • Excellent heat and oxidation resistance – Performance stability in conditions up to 1100°C+ depending on grade • Precision fitment – Custom-manufactured to match tube diameter, radius, and system design • Easy to install – Mountable via stainless steel bands, clamps, or tack welds without disassembly • Long-lasting durability – Reduces frequency of tube failure, improving system efficiency and safety Conclusion The U Type Outer Half Round Tube Shield by Ladhani Metal Corporation—manufacturer, supplier, and exporter—is available in a complete range of stainless steel and heat-resistant alloy grades to suit any industrial application. These shields provide robust, reliable protection for the outer arc of U-bend tubes exposed to high temperatures, corrosive gases, and erosive flows. With grade-specific performance, precision fabrication, and simple installation, they are a proven solution for extending tube service life in critical systems. For technical support, customized dimensions, or quotations, please contact Ladhani Metal Corporation.

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are precision-engineered components designed to protect the outer surfaces of boiler tubes, heat exchangers, and industrial piping systems from erosion, scale formation, and thermal fatigue. These shields play a crucial role in minimizing tube failure and improving overall equipment reliability in high-temperature and particulate-laden environments. SS 430 Half Round Tube Shield The SS 430 Half Round Tube Shield is a semi-cylindrical cladding made from ferritic stainless steel grade 430. With good corrosion resistance, excellent oxidation resistance, and superior thermal conductivity, SS 430 is well suited for non-pressurized or moderately corrosive environments. It is particularly effective in flue gas paths and air preheaters where thermal stress and ash erosion can degrade exposed tubes. The half-round geometry ensures easy, secure installation and a consistent protective barrier around the tube's surface, enhancing durability without interfering with system function. Chemical Composition of SS 430 – Ferritic Stainless Steel • Carbon (C): ≤ 0.12% • Manganese (Mn): ≤ 1.00% • Phosphorus (P): ≤ 0.040% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 16.0 – 18.0% • Nickel (Ni): ≤ 0.75% • Iron (Fe): Balance Uses • Boiler Tube Surface Protection – Shields tubes in low to moderate temperature zones from flue gas corrosion, ash abrasion, and thermal scaling. • Air Preheater Tubing – Guards against dust erosion in regenerative air preheaters and gas-to-air heat transfer zones. • Economizer Tube Protection – Used in downstream sections of boilers where lower temperatures allow for effective use of ferritic steels. • Steam Line Shields – Protects low-pressure steam tubing and condensate lines in systems not requiring austenitic stainless steel grades. • Heat Exchanger Outer Shells – Provides an extra layer of protection in air-cooled or shell-side applications exposed to mechanical wear. Features • Good Oxidation Resistance – Performs reliably in oxidizing conditions up to 815°C, ideal for flue gas exposure and dry ash environments. • Ferritic Structure – Offers better thermal conductivity and resistance to thermal expansion than austenitic grades, reducing distortion risk. • Corrosion Resistance – Resists corrosion from atmospheric moisture, flue gas condensates, and other mildly aggressive compounds. • Cost-Effective – Offers an economical alternative to higher alloy stainless steels in appropriate thermal zones. • Precision Fit – Half-round design enables quick installation and conforms closely to tube diameters for optimal protection. • Surface Finish Options – Supplied in bright annealed, pickled, or passivated finishes based on operational requirements. • Custom Fabrication – Available in a range of wall thicknesses, diameters, and lengths to meet plant-specific installation demands. Applications • Thermal Power Stations – Shields economizer and air preheater tubes from dust-laden exhaust gas erosion and moderate thermal stress. • Cement and Lime Kilns – Used to protect heat recovery and cooler tubes from dry ash abrasion in hot air ducts. • Food Processing Boilers – Applied in steam systems requiring corrosion resistance and thermal control under hygienic conditions. • HVAC and Utility Boilers – Installed in auxiliary boilers where conditions do not require high-alloy materials but demand durability. • Pulp and Paper Mills – Protects lower furnace zone tubes and stack-side economizers from condensate corrosion and soot accumulation. • Sugar and Distillery Plants – Guards process steam and heat recovery tubes from ash and scale in biomass and bagasse-fired units. Conclusion The SS 430 Half Round Tube Shield by Ladhani Metal Corporation is a durable, cost-efficient solution for protecting tubing systems in environments where moderate corrosion resistance, good oxidation behavior, and thermal stability are essential. It is best suited for dry, low to mid-temperature gas flow areas where the mechanical and thermal loads are not extreme. The ferritic stainless steel structure provides a favorable balance of performance and economy, particularly in large-scale power and process plants. With precision manufacturing, tailored dimensions, and reliable service, Ladhani Metal Corporation delivers proven tube protection technology trusted across multiple industries. For custom orders, sizing assistance, or to request a technical quote, please contact Ladhani Metal Corporation.

DIN 2633 Inconel flanges PN 16 are precision-engineered weld neck flanges manufactured to the DIN 2633 standard, specifically designed for use in high-temperature and highly corrosive industrial environments. These flanges offer secure, pressure-resistant connections for pipeline systems operating at up to 16 bar (232 psi). Fabricated from premium Inconel alloys such as 600, 625, and 718, they provide excellent resistance to oxidation, thermal stress, and corrosive chemicals, making them ideal for extreme service conditions across various industries. Ladhani Metal Corporation is a trusted global supplier and manufacturer of Inconel flanges, known for its commitment to material integrity, precision engineering, and strict compliance with international quality standards. Each flange is subjected to thorough inspections to meet performance, safety, and durability expectations. Pressure Rating: • PN 16 (16 bar / 232 psi): Suitable for high-performance pipeline systems requiring resistance to thermal cycling, corrosion, and pressure fluctuation. Flange Type: • Weld Neck Flanges Long tapered hub design ensures smooth fluid transitions and reduces mechanical stress at the base, offering strong and vibration-resistant joints. • Flat Face (FF) Flanges Promotes even gasket loading and is compatible with soft or cast-mating components, enhancing sealing efficiency and system longevity. Inconel Grades and Full Composition: Inconel 600 • Nickel (Ni): ≥ 72.0% • Chromium (Cr): 14.0 – 17.0% • Iron (Fe): 6.0 – 10.0% • Carbon (C): ≤ 0.15% • Manganese (Mn): ≤ 1.0% • Silicon (Si): ≤ 0.5% • Sulfur (S): ≤ 0.015% Applications: Ideal for high-temperature furnace components, chemical processing, and food equipment exposed to acidic and alkaline environments. Inconel 625 • Nickel (Ni): 58.0% min • Chromium (Cr): 20.0 – 23.0% • Molybdenum (Mo): 8.0 – 10.0% • Niobium (Nb) + Tantalum (Ta): 3.15 – 4.15% • Iron (Fe): ≤ 5.0% • Carbon (C): ≤ 0.10% • Manganese (Mn): ≤ 0.5% • Silicon (Si): ≤ 0.5% Applications: Suitable for seawater systems, offshore oil and gas equipment, aerospace ducting, and high-strength chemical processing. Inconel 718 • Nickel (Ni): 50.0 – 55.0% • Chromium (Cr): 17.0 – 21.0% • Iron (Fe): Balance • Niobium (Nb) + Tantalum (Ta): 4.75 – 5.5% • Molybdenum (Mo): 2.8 – 3.3% • Titanium (Ti): 0.65 – 1.15% • Aluminum (Al): 0.2 – 0.8% • Carbon (C): ≤ 0.08% Applications: Extensively used in aerospace engines, turbine components, cryogenic storage tanks, and high-strength fasteners due to excellent fatigue, creep, and rupture resistance. Applications of DIN 2633 Inconel Flanges PN 16: • Petrochemical and Refining Industries Withstands exposure to high-temperature hydrocarbons, acids, and corrosive gases. • Marine and Offshore Installations Corrosion-resistant in saltwater and high-pressure environments, ideal for subsea and topside systems. • Aerospace and Power Generation Used in turbine and exhaust systems where strength retention at elevated temperatures is critical. • Chemical Processing Plants Stable under acidic, oxidizing, and reducing agents in continuous and batch processing systems. • Heat Exchangers and Reactors Reliable performance in thermal cycling and aggressive fluid handling applications. Key Features: • Designed in accordance with DIN 2633 specifications • Rated PN 16 for secure medium-pressure operation • Weld neck design improves alignment and minimizes mechanical stress • Available in Inconel grades 600, 625, and 718 • Exceptional resistance to high-temperature oxidation and corrosion • High tensile strength and fatigue resistance under mechanical loads • Tailored dimensions, surface finishes, and specifications available upon request Conclusion: DIN 2633 Inconel Flanges PN 16 from Ladhani Metal Corporation are engineered to meet the toughest demands of modern industry. Offering excellent resistance to high-temperature and corrosive environments, these flanges made from Inconel 600, 625, and 718 are ideal for critical applications across aerospace, petrochemical, marine, and power generation sectors. For detailed product options, technical support, or a customized quote, contact Ladhani Metal Corporation today.

DIN 2633 titanium flanges PN 16 are precision-engineered weld neck flanges manufactured in accordance with the DIN 2633 standard. These flanges are designed for medium to high-pressure applications up to 16 bar (232 psi), delivering strong, lightweight, and corrosion-resistant connections in highly demanding pipeline environments. Constructed from premium-grade titanium alloys such as Grade 2 and Grade 5, they offer unmatched corrosion resistance, low density, and excellent mechanical properties, making them ideal for aggressive and weight-sensitive industrial applications. Ladhani Metal Corporation is a globally recognized manufacturer and supplier of titanium flanges, known for its technical expertise, product reliability, and adherence to stringent international specifications. Each flange undergoes meticulous quality checks to meet all applicable safety and performance standards. Pressure Rating: • PN 16 (16 bar / 232 psi): Designed for pipeline systems requiring secure, leak-free connections and outstanding corrosion protection under moderate pressure conditions. Flange Type: • Weld Neck Flanges Designed with an extended tapered hub to ensure superior structural support and reduce localized stress. Ideal for critical piping systems where fatigue resistance is essential. • Flat Face (FF) Flanges Provides an even sealing surface for use with softer gaskets or systems involving cast components, ensuring leak-proof performance and consistent compression. Titanium Grades and Full Composition: Titanium Grade 2 • Titanium (Ti): ≥ 98.8% • Iron (Fe): ≤ 0.30% • Oxygen (O): ≤ 0.25% • Carbon (C): ≤ 0.08% • Nitrogen (N): ≤ 0.03% • Hydrogen (H): ≤ 0.015% Applications: Preferred in desalination, chemical processing, marine, and medical applications due to its excellent corrosion resistance and biocompatibility. Titanium Grade 5 (Ti-6Al-4V) • Titanium (Ti): Balance • Aluminum (Al): 5.5 – 6.75% • Vanadium (V): 3.5 – 4.5% • Iron (Fe): ≤ 0.40% • Oxygen (O): ≤ 0.20% • Carbon (C): ≤ 0.08% • Nitrogen (N): ≤ 0.05% • Hydrogen (H): ≤ 0.015% Applications: Commonly used in aerospace, offshore, automotive, and industrial systems requiring high strength-to-weight ratio, fatigue resistance, and temperature stability. Applications of DIN 2633 Titanium Flanges PN 16: • Desalination Plants Highly resistant to seawater and chlorides, suitable for intake and discharge piping. • Chemical and Pharmaceutical Industries Used in handling reactive or highly corrosive media where stainless steel may fail. • Aerospace and Defense Ideal for weight-sensitive applications requiring structural integrity and resistance to atmospheric conditions. • Oil and Gas Reliable in offshore platforms and downhole equipment exposed to saltwater and high pressures. • Medical Equipment Manufacturing Biocompatible properties allow safe usage in hygienic and sterile processing systems. Key Features: • Precision manufactured to DIN 2633 specifications • PN 16 pressure rating for medium to high-pressure performance • Weld neck flange design ensures enhanced mechanical stability • Available in corrosion-resistant titanium grades 2 and 5 • Lightweight construction reduces overall system load • High resistance to acids, chlorides, and extreme environments • Custom dimensions, pressure classes, and finishes available on request Conclusion: DIN 2633 Titanium Flanges PN 16 from Ladhani Metal Corporation provide a high-performance solution for systems that require excellent corrosion resistance, mechanical strength, and reduced weight. With superior manufacturing precision and quality assurance, these flanges are suited for challenging environments in marine, aerospace, chemical, and medical sectors. For custom specifications, detailed technical assistance, or pricing inquiries, contact Ladhani Metal Corporation today.

DIN 2633 stainless steel flanges PN 16 are precision-engineered weld neck flanges manufactured in accordance with the DIN 2633 standard. These flanges are designed for higher medium-pressure applications up to 16 bar (232 psi), offering durable and secure connections in a wide range of industrial pipeline systems. Made from high-quality stainless steel grades such as 304, 316, and 321, they offer superior corrosion resistance, mechanical strength, and long-term performance under more demanding operating and environmental conditions. Ladhani Metal Corporation is a leading global manufacturer and supplier of stainless steel flanges, known for consistent product quality, technical precision, and adherence to international standards. Each flange undergoes rigorous inspection to ensure compliance with industry norms and safety guidelines. Pressure Rating: • PN 16 (16 bar / 232 psi): Suitable for medium to high-pressure pipeline systems requiring enhanced joint strength and corrosion protection. Flange Type: • Weld Neck Flanges Designed with a long tapered hub that facilitates proper pipe alignment and reduces stress concentration at the flange base. This ensures smooth flow transitions and minimizes turbulence. • Flat Face (FF) Flanges Flat face configuration promotes uniform gasket compression, making it ideal for systems using soft gasket materials or mating with cast components. Stainless Steel Grades and Full Composition: Stainless Steel 304 • Chromium (Cr): 18.0 – 20.0% • Nickel (Ni): 8.0 – 10.5% • Carbon (C): ≤ 0.08% (304), ≤ 0.03% (304L) • Manganese (Mn): ≤ 2.0% • Silicon (Si): ≤ 1.0% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.03% • Iron (Fe): Balance Applications: Suitable for general-purpose piping systems including potable water, food-grade processing lines, and moderate chemical environments. Stainless Steel 316 • Chromium (Cr): 16.0 – 18.0% • Nickel (Ni): 10.0 – 14.0% • Molybdenum (Mo): 2.0 – 3.0% • Carbon (C): ≤ 0.08% (316), ≤ 0.03% (316L) • Manganese (Mn): ≤ 2.0% • Silicon (Si): ≤ 1.0% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.03% • Iron (Fe): Balance Applications: Suitable for more aggressive environments including chemical processing, marine systems, and equipment exposed to chlorinated solutions or cleaning agents. Stainless Steel 321 • Chromium (Cr): 17.0 – 19.0% • Nickel (Ni): 9.0 – 12.0% • Titanium (Ti): ≥ 5 × C (typically 0.20 – 0.70%) • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.0% • Silicon (Si): ≤ 1.0% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.03% • Iron (Fe): Balance Applications: Preferred in applications involving elevated temperatures and moderate corrosion exposure, such as exhaust systems, heat exchangers, and food-grade thermal equipment. Applications of DIN 2633 Stainless Steel Flanges PN 16: • Industrial Water Systems Used in pressurized water delivery and treatment systems requiring increased pressure tolerance. • Chemical and Petrochemical Plants Suitable for pipelines transporting reactive or mildly corrosive chemicals. • Marine and Offshore Applications Resistant to saltwater corrosion and pressure variations in marine environments. • Food and Beverage Processing Employed in sanitary and hygienic systems requiring strong, corrosion-resistant joints. • HVAC Systems Used in high-pressure duct and pipe connections for heating, ventilation, and cooling systems. Key Features: • Manufactured in compliance with DIN 2633 standards • PN 16 pressure rating for enhanced medium-pressure service • Weld neck design supports secure, vibration-resistant connections • Offered in stainless steel grades 304, 304L, 316, 316L, and 321 • High resistance to chemical and environmental corrosion • Long-lasting performance under mechanical stress and thermal cycles • Custom dimensions, materials, and finishes available upon request Conclusion: DIN 2633 Stainless Steel Flanges PN 16 from Ladhani Metal Corporation are built for reliability in demanding industrial settings that require higher pressure tolerance and superior corrosion resistance. These weld neck flanges, made from premium stainless steel, are ideal for applications across water treatment, chemical processing, marine installations, and food-grade systems. For custom configurations, technical consultations, or detailed pricing, contact Ladhani Metal Corporation today.

DIN 2632 duplex steel flanges PN 10 are robust weld neck flanges manufactured in accordance with the DIN 2632 standard, designed for medium-pressure applications up to 10 bar (145 psi). These flanges are made from duplex stainless steel, a material that combines the high strength of ferritic steel with the corrosion resistance of austenitic stainless steel. This dual-phase microstructure provides excellent resistance to stress corrosion cracking, pitting, and crevice corrosion in aggressive environments. Ladhani Metal Corporation is a reputable global manufacturer and supplier of duplex steel flanges, offering products with precise dimensions, superior mechanical integrity, and full compliance with international industry standards. All flanges are rigorously inspected and tested to ensure reliability in demanding applications. Pressure Rating: • PN 10 (10 bar / 145 psi): Ideal for medium-pressure piping systems requiring a balance of strength, corrosion resistance, and cost efficiency. Flange Type: • Weld Neck Flanges Engineered with a long tapered hub for secure and stress-reducing pipe-to-flange connections. Supports smooth fluid transition and minimizes turbulence. • Flat Face (FF) Flanges Flat face construction ensures even gasket compression, suitable for use with soft gasket materials and cast equipment. Duplex Steel Grades and Composition: Duplex 2205 (UNS S32205 / S31803) • Chromium (Cr): 21–23% • Nickel (Ni): 4.5–6.5% • Molybdenum (Mo): 2.5–3.5% • Nitrogen (N): 0.14–0.20% • Manganese (Mn): ≤ 2.0% • Carbon (C): ≤ 0.03% • Iron (Fe): Balance Applications: Duplex 2205 offers outstanding resistance to pitting, crevice corrosion, and chloride stress corrosion cracking. It is widely used in offshore platforms, chemical processing, marine environments, and desalination plants. Applications of DIN 2632 Duplex Steel Flanges PN 10: • Oil and Gas Industry Used in offshore and onshore systems handling sour gas, saltwater, and corrosive media. • Chemical and Petrochemical Ideal for reactors, heat exchangers, and piping exposed to acids, chlorides, and oxidizing substances. • Marine and Shipbuilding Provides excellent performance in seawater systems, ballast water treatment, and ship hull piping. • Desalination and Water Treatment Ensures long-term performance in high-salinity and high-chloride environments. • Pulp and Paper Applied in bleach plants and other areas exposed to aggressive chemical agents. Key Features: • Manufactured to DIN 2632 specifications • PN 10 pressure rating suitable for medium-pressure applications • Weld neck design for high-integrity, low-stress connections • Available in Duplex 2205 and Super Duplex 2507 for tailored corrosion resistance and strength • Flat face option for optimal gasket compression • Excellent resistance to stress corrosion cracking and pitting • High strength-to-weight ratio • Custom sizes, pressure classes, and finishes available upon request Conclusion: DIN 2632 duplex steel flanges PN 10 from Ladhani Metal Corporation provide a highly reliable, corrosion-resistant, and mechanically strong solution for demanding industrial applications. With advanced material options such as Duplex 2205 and Super Duplex 2507, these flanges are well-suited for marine, chemical, oil and gas, and water treatment sectors. For customized solutions, technical support, or pricing details, contact Ladhani Metal Corporation today

DIN 2632 Monel flanges PN 10 are high-performance weld neck flanges manufactured to meet the DIN 2632 standard, specifically designed for medium-pressure applications up to 10 bar (145 psi). These flanges are made from Monel, a nickel-copper alloy known for its outstanding corrosion resistance, particularly in marine and chemical environments. With excellent mechanical strength and superior durability in highly aggressive conditions, DIN 2632 Monel flanges provide a reliable solution where standard materials may fail. Ladhani Metal Corporation is a leading global manufacturer and supplier of Monel flanges, delivering consistent quality, dimensional accuracy, and full compliance with international standards. Each flange is meticulously tested to ensure optimum performance under demanding industrial conditions. Pressure Rating: • PN 10 (10 bar / 145 psi): Suitable for medium-pressure piping systems requiring high corrosion resistance and mechanical stability. Flange Type: • Weld Neck Flanges Designed with a long tapered hub that ensures precise pipe alignment and reduces localized stress at the flange connection. Ideal for high-integrity, high-strength joints. • Flat Face (FF) Flanges Flat face configuration ensures uniform gasket compression, making them ideal for systems using soft gaskets or connecting to cast components. Monel Grades and Composition: Monel 400 • Nickel (Ni): Minimum 63% • Copper (Cu): 28–34% • Iron (Fe): 2.0–2.5% • Manganese (Mn): ≤ 2.0% • Silicon (Si): ≤ 0.5% • Carbon (C): ≤ 0.3% Applications: Monel 400 is widely used in chemical and marine environments due to its excellent resistance to seawater, acids, and alkalis. It is commonly used in heat exchangers, seawater piping, pumps, and valves handling corrosive media. Monel K500 • Nickel (Ni): 63% minimum • Copper (Cu): 27–33% • Aluminum (Al): 2.3–3.15% • Titanium (Ti): 0.35–0.85% • Iron (Fe): ≤ 2.0% • Carbon (C): ≤ 0.25% Applications: Monel K500 combines the corrosion resistance of Monel 400 with greater strength and hardness due to age-hardening. It is used in marine shafts, chemical processing equipment, oil and gas tools, and high-strength fasteners. Applications of DIN 2632 Monel Flanges PN 10: • Marine and Offshore Ideal for seawater handling systems, shipbuilding, desalination units, and offshore platforms exposed to highly corrosive saltwater environments. • Chemical and Petrochemical Industry Used in pipelines and vessels transporting sulfuric acid, hydrofluoric acid, alkalis, and other aggressive substances. • Oil and Gas Industry Suitable for sour gas environments, offshore rigs, and subsea applications where corrosion and stress resistance are critical. • Power Generation Applied in cooling systems, condensers, and process equipment subjected to brine, steam, and corrosive gases. Key Features: • Fabricated to DIN 2632 specifications • PN 10 pressure rating for medium-pressure service • Weld neck and flat face designs available • Manufactured using Monel 400 and Monel K500 for corrosion-intensive applications • Exceptional resistance to seawater, acids, and alkalis • High strength and toughness even at elevated temperatures • Ideal for marine, chemical, and oil & gas industries • Custom dimensions, finishes, and alloy compositions available upon request Conclusion: DIN 2632 Monel Flanges PN 10 from Ladhani Metal Corporation are engineered to provide superior corrosion resistance, mechanical strength, and long-term reliability in medium-pressure industrial systems. With Monel grades 400 and K500, these flanges are well-suited for harsh environments in the marine, chemical, petrochemical, and offshore sectors. For detailed specifications, custom requirements, or pricing information, contact Ladhani Metal Corporation today.