'cylinder descriptors'

Product name: Gr2 Titanium Tubes 25.4mm Standard:ASTM B338 Material:Titanium Gr2 Diameter:5-914mm Wall thickness:0.5-10mm Length:Max 16000mm Surface:Pickling surface/Polished Type:Seamless, welded Application:Heat Exchanger, chemical industry etc. Technique:Rolled Gr2 Titanium Tubes 25.4mm Titanium pipe/titanium alloy pipe has excellent strength, hardness, small density, light weight, high temperature resistance, low temperature resistance, good machining performance, excellent corrosion resistance, non-magnetic non-toxic, good heat exchange performance. It also has memory and superconductivity. Hydrogen storage performance is very outstanding, the products are widely used in: navigation, aerospace, vacuum salt, automotive industry, medical sports, paper and textile industry, electric power industry, metallurgy industry, chlor-alkali industry, chemical fertilizer industry, seawater desalination industry. 1.Shape: round tube, square tube, spiral tube, coil tube, 2. Standard: ASTM B337, ASTM B338, ASTM B861, ASTM B862 3. Srand: Titanium GR2 4. Specifications: ф (3-159) x (0.2-10.0) x L(500-9000) ф (30-1000) x (0.5-12.0) x L(500-15000) Extruded tube (M state) ф (45-219) x (5.0-30.0) x L 5. Production method: cold rolling, extrusion 6. Testing: ultrasonic testing, eddy current testing, water pressure testing, airtight testing Chemical composition (Wt%) ASTM No. Fe max O max N max C max H max Pd Al Bal Grade 2 0.3 0.25 0.03 0.1 0.015 - - Ti Physical Properties (Min) ASTM Grade Alloy Composition Tensile Strength Yield Strength Elongation min % ksi Mpa ksi Mpa

Product name:Titanium Pressure Vessel Hemispherical Tank Head Standard: ASME VIII-I, DIN28013 Material: GR1, GR2, GR7, GR12 etc. Size: Customized The Hemispherical Tank Head head refers to the element used to close the end of the container to isolate the internal and external media, also known as the end cover. The head of cylinder descriptors is generally a rotating shell. According to the shape of the head surface, it can be divided into convex shape, conical shape, flat shape and combined shape. Convex head refers to the head whose outer surface is convex, such as semi spherical, elliptical, dished and non folded spherical head. Some gas cylinders adopt the combined bottom head with convex face inward, which can not only ensure the strength, but also meet the needs of use. Matterial: titanium GR1, GR2, GR7, GR12 etc. Type: select suitable head types according to the requirements and effectiveness of industrial equipment, such as elliptic, butterfly, cone, ball, etc Size: generally, the height width ratio of the head is manufactured according to international standards, or can be customized according to customer requirements Scope of application: the head is widely used in petroleum, electronics, chemical industry, medicine, textile, food, machinery, construction, nuclear power, aerospace, industry and other industries. ASTM B265 Fe max O max N max C max H max Pd Al V Mo Ni Elong'n Rp 0.2 Rm No wt% wt% wt% wt% wt% wt% wt% wt% wt% wt% % MPa MPa Grade 1 0.2 0.18 0.03 0.1 0.015 24 170-310 240 Grade 2 0.3 0.25 0.03 0.1 0.015 20 275-450 345-480 Grade 3 0.25 0.3 0.05 0.1 0.015 18 360-480 480-700 Grade 4 0.5 0.4 0.05 0.1 0.015 15 500-530 600-680 Grade 5 0.4 0.2 0.05 0.1 0.015 5.5-6.7 10 800-1100 890-1400 Grade 6 0.1 16 780-820 820-860 Grade 7 0.3 0.25 0.03 0.1 0.015 0,12-0,25 20 275-450** 345 Grade 9 0.25 0.15 0.02 0.05 0.015 2,5-3,05 15 550 650 Grade 11 0.2 0.18 0.03 0.1 0.015 0.12-0.25 24 170-310** 240 Grade 12 0.3 0.25 0.03 0.1 0.015 0.3 0.8 25 414-460 499-600 Grade 13 0.5 Grade 14 0.5 Grade 15 0.5 Grade 16 0.04-0.08 27 345 485 Grade 17 0.18 0.04-0.08 35 206 345

"LADHANI METAL CORPORATION is a professional Manufacturer of Stainless Steel Butt Weld , Socket Weld and Threaded Fittin.we have been producing A403/A403M-99a , A774/A774M-98, A182/182M , A182/A182M, A778 - A778-98 Stainless Steel Threaded Pipe Bend since 1988. We are Manufacturer of Stainless Steel Threaded Pipe Bend , Our products are manufactured using quality material and go through a rigorous quality check at all stages of production to ensure quality. LMC has an extensive history of Stainless Steel Threaded Pipe Bend Manufacturing in india, and Exporting and Trading.We are India Origin Factory of Stainless Steel Threaded Pipe Bend We at LMC has a wide selection at great prices to help you get creative. All the Stainless Steel Threaded Pipe Bend are quality guaranteed. If you have any question, please feel free to contact us. Dimension Spec : ANSI B16.9, B16.28 , MSS SP-43 , SP-79 We Export Quality Fittings to United Arab Emirates,Qatar,Kuwait,Bahrain,Oman,Saudi Arabia,Iran." Stainless Steel Threaded Pipe Bend Available In 1.4002, 1.4002, 1.4006, 1.4016, 1.4021, 1.4057, 1.4301, 1.4307, 1.431, 1.4311, 1.4313, 1.4318, 1.4362, 1.4371, 1.4401, 1.4404, 1.4429, 1.4438, 1.4462, 1.4509, 1.4512, 1.4541, 1.455, 1.4571, 1.4828, 1.4833, 1.4845, 201, 202, 301, 304, 309, 310, 316, 317, 321, 347, 405, 409, 410, 420, 430, 431, 436, 439, 2205, 2304, 00Cr17Ni14Mo2, 00Cr18Ti, 00Cr19Ni13Mo3, 08Ch18N10T, 08Ch18N12B, 0Cr13, 0Cr13Al, 0Cr17Ni12Mo2, 0Cr18Ni10Ti, 0Cr18Ni11Nb, 0Cr18Ni12Mo2Ti, 0Cr18Ni9, 0Cr25Ni20, 10Ch17N13M2T, 1Cr12, 1Cr17, 1Cr17Ni2, 1Cr17Ni7, 1Cr23Ni13, 201L, 201LN, 20Ch17N2, 20Ch23N18, 20Ch25N20S2, 301L, 301LN, 304H, 304L, 304LN, 309S, 310S, 316L, 316LN, 316Ti, 317L, 317LN, 410S, 436L, J-201, J-201L, J-201LN, J-202, J-204 Cu, J-2205, J-2304, J-301, J301L, J301LN, J-304, J-304H, J-304L, J-304LN, J-309, J-309S, J-310, J-310S, J-316, J-316L, J-316LN, J-316Ti, J-317, J31727, J-317L, J-317LN, J-31803, J-321, J-347, J-4, J-405, J-409, J-409M, J-409RC, J-410, J-410S, J-415, J-420, J-430, J-430Ti, J-431, J-436, J-436L, J-439, J-441, JBS, JSLAUS (J1), S20100, S20103, S20153, S20200, S20430, S30100, S30103, S30153, S30400, S30403, S30409, S30453, S30900, S30908, S31000, S31008, S31600, S31603, S31635, S31653, S31700, S31703, S31727, S31753, S31803, S32100, S32205, S32304, S34700, S40500, S40900, S41000, S41008, S41500, S42000, S43000, S43035, S43100, S43600, S43932, S43940, SUH310, SUH409, SUS201, SUS202, SUS301, SUS304, SUS304L, SUS304LN, SUS309S, SUS310S, SUS316, SUS316L, SUS316Ti, SUS317L, SUS321, SUS329J3L, SUS347, SUS403, SUS405, SUS410, SUS420JI, SUS430, SUS430LX, SUS436L, X02Cr17Ni12Mo2, X04Cr12, X04Cr17Ni12Mo2, X04Cr17Ni12Mo2Ti, X04Cr18Ni10Nb, X04Cr18Ni10Ti, X04Cr19Ni9, X07Cr17, X10Cr17Mn6Ni4N20, X10Cr17Ni7, X10Cr18Mn9Ni5, X12Cr12, X12Cr13, X12CrMnNiN17-7-5, X12CrMnNiN18-9-5, X12CrNi17-7, X12CrNi25-21, X15Cr24Ni13, X15CrNiSi25-20, X17CrNi15-2, X20Cr13, X20Cr13, X20Cr25Ni20, X2CrMnNiN17-7-5, X2CrN N 23-4, X2CrNi18-9, X2CrNiMo17-13-2, X2CrNiMo18154, X2CrNiMoN 22-5-3, X2CrNiMoN17-11-2 SUS316LN, X2CrNiN18-10, X2CrNiN18-7, X2CrTi12, X2CrTiNb18, X3CrNiMo13-4, X3CrTi17, X3CrTi17, X5CrNi18-10, X5CrNiMo17-12-2, X6Cr-13, X6Cr17, X6CrAl13, X6CrNiMoTi17-12-2, X6CrNiNb18-10, X6CrNiTi18-10

"LADHANI METAL CORPORATION is a professional Manufacturer of Stainless Steel Butt Weld , Socket Weld and Threaded Fittin.we have been producing A403/A403M-99a , A774/A774M-98, A182/182M , A182/A182M, A778 - A778-98 Stainless Steel Welded Cross since 1988. We are Manufacturer of Stainless Steel Welded Cross , Our products are manufactured using quality material and go through a rigorous quality check at all stages of production to ensure quality. LMC has an extensive history of Stainless Steel Welded Cross Manufacturing in india, and Exporting and Trading.We are India Origin Factory of Stainless Steel Welded Cross We at LMC has a wide selection at great prices to help you get creative. All the Stainless Steel Welded Cross are quality guaranteed. If you have any question, please feel free to contact us. Dimension Spec : ANSI B16.9, B16.28 , MSS SP-43 , SP-79 We Export Quality Fittings to United Arab Emirates,Qatar,Kuwait,Bahrain,Oman,Saudi Arabia,Iran." Stainless Steel Welded Cross Available In 1.4002, 1.4002, 1.4006, 1.4016, 1.4021, 1.4057, 1.4301, 1.4307, 1.431, 1.4311, 1.4313, 1.4318, 1.4362, 1.4371, 1.4401, 1.4404, 1.4429, 1.4438, 1.4462, 1.4509, 1.4512, 1.4541, 1.455, 1.4571, 1.4828, 1.4833, 1.4845, 201, 202, 301, 304, 309, 310, 316, 317, 321, 347, 405, 409, 410, 420, 430, 431, 436, 439, 2205, 2304, 00Cr17Ni14Mo2, 00Cr18Ti, 00Cr19Ni13Mo3, 08Ch18N10T, 08Ch18N12B, 0Cr13, 0Cr13Al, 0Cr17Ni12Mo2, 0Cr18Ni10Ti, 0Cr18Ni11Nb, 0Cr18Ni12Mo2Ti, 0Cr18Ni9, 0Cr25Ni20, 10Ch17N13M2T, 1Cr12, 1Cr17, 1Cr17Ni2, 1Cr17Ni7, 1Cr23Ni13, 201L, 201LN, 20Ch17N2, 20Ch23N18, 20Ch25N20S2, 301L, 301LN, 304H, 304L, 304LN, 309S, 310S, 316L, 316LN, 316Ti, 317L, 317LN, 410S, 436L, J-201, J-201L, J-201LN, J-202, J-204 Cu, J-2205, J-2304, J-301, J301L, J301LN, J-304, J-304H, J-304L, J-304LN, J-309, J-309S, J-310, J-310S, J-316, J-316L, J-316LN, J-316Ti, J-317, J31727, J-317L, J-317LN, J-31803, J-321, J-347, J-4, J-405, J-409, J-409M, J-409RC, J-410, J-410S, J-415, J-420, J-430, J-430Ti, J-431, J-436, J-436L, J-439, J-441, JBS, JSLAUS (J1), S20100, S20103, S20153, S20200, S20430, S30100, S30103, S30153, S30400, S30403, S30409, S30453, S30900, S30908, S31000, S31008, S31600, S31603, S31635, S31653, S31700, S31703, S31727, S31753, S31803, S32100, S32205, S32304, S34700, S40500, S40900, S41000, S41008, S41500, S42000, S43000, S43035, S43100, S43600, S43932, S43940, SUH310, SUH409, SUS201, SUS202, SUS301, SUS304, SUS304L, SUS304LN, SUS309S, SUS310S, SUS316, SUS316L, SUS316Ti, SUS317L, SUS321, SUS329J3L, SUS347, SUS403, SUS405, SUS410, SUS420JI, SUS430, SUS430LX, SUS436L, X02Cr17Ni12Mo2, X04Cr12, X04Cr17Ni12Mo2, X04Cr17Ni12Mo2Ti, X04Cr18Ni10Nb, X04Cr18Ni10Ti, X04Cr19Ni9, X07Cr17, X10Cr17Mn6Ni4N20, X10Cr17Ni7, X10Cr18Mn9Ni5, X12Cr12, X12Cr13, X12CrMnNiN17-7-5, X12CrMnNiN18-9-5, X12CrNi17-7, X12CrNi25-21, X15Cr24Ni13, X15CrNiSi25-20, X17CrNi15-2, X20Cr13, X20Cr13, X20Cr25Ni20, X2CrMnNiN17-7-5, X2CrN N 23-4, X2CrNi18-9, X2CrNiMo17-13-2, X2CrNiMo18154, X2CrNiMoN 22-5-3, X2CrNiMoN17-11-2 SUS316LN, X2CrNiN18-10, X2CrNiN18-7, X2CrTi12, X2CrTiNb18, X3CrNiMo13-4, X3CrTi17, X3CrTi17, X5CrNi18-10, X5CrNiMo17-12-2, X6Cr-13, X6Cr17, X6CrAl13, X6CrNiMoTi17-12-2, X6CrNiNb18-10, X6CrNiTi18-10

Product name: Gr2 Titanium welded Tube Standard:ASTM B338 Material: GR1 GR2 GR7 GR12 Diameter:10-914mm Wall thickness:0.5-10mm Length:Max 16000mm Surface:Pickling surface/Polished Type:Seamless, welded Application:Heat Exchanger, chemical industry etc. Technique:Rolled Gr2 Titanium welded Tube Titanium welded pipe is produced by automatic continuous production line, using titanium strip coil with uniform wall thickness through cold bending forming, welding, online heat treatment, sizing straightening, non-destructive testing and air tightness test and other procedures. From sponge titanium to welded pipe, the material utilization rate is usually about 80%, if the titanium strip coil as the raw material, its material utilization rate is more than 95%. With the rapid development of titanium industry and mature welding technology, the titanium tube welding will also greatly enhance production efficiency, quality stability, consistency, and the production efficiency will be higher, can according to customer request length cut into the required length, short delivery time, high material utilization, cost per unit is seamless tube will be lower. Product name: Gr2 Titanium welded Tube Standard:ASTM B338 ASTMB 862 Material: GR1 GR2 GR7 GR12 Diameter:10-914mm Wall thickness:0.5-10mm Length:Max 16000mm Surface:Pickling surface/Polished Type:Seamless, welded Application:Heat Exchanger, chemical industry etc. Technique:Rolled MOQ:100kgs Titanium welded pipe production process: titanium with open book - shearing butt - looping the loading - titanium belt cleaning - type pipe forming and welding to eddy current flaw detection, the predetermined diameter - online annealing - pure sizing/straightening to eddy current flaw detection, laser caliper - online printing - scale cutting and ultrasonic testing to fine scale/flat head, air tightness test to the finished product inspection, packaging warehousing.

Product name:Gr12 Titanium Hemispherical Head Standard: ASME VIII-I, DIN28013 Material: GR1, GR2, GR7, GR12 Size: Customized Gr12 Titanium Hemispherical Head Hemispherical head refers to the head composed of half spherical shell and straight edge (cylindrical short joint). The radius of curvature of the spherical shell is equal everywhere and the force is uniform. Compared with other heads, hemispherical heads require the smallest wall thickness under the same internal pressure. At the connection between the spherical shell and the cylinder with the same thickness, the edge stress caused by the change of curvature radius is only 3.1% of the overall membrane stress of the cylinder, which can be ignored. Therefore, the mechanical properties of hemispherical head are the best and the materials used are the most economical. Product name:Gr12 Titanium Hemispherical Head Standard: ASME VIII-I, DIN28013 Material: GR12 Size: Customized MOQ:1PC Spherical head, also known as spherical crown head, is a head formed by the spherical crown part of the spherical shell, including hemispherical head and non folded spherical head. The spherical head has excellent forging, smooth surface, acid and alkali resistance, high temperature resistance, beautiful appearance and strong texture performance. The applicable medium of spherical head is gas, liquid and steam. Spherical heads are used in petroleum, electronics, chemical industry, medicine, textile, food, machinery, construction, nuclear power, aerospace, military and other industries. Precautions for use of spherical head: 1. Carbon steel spherical head will crack in nitrate, ammonia, alkaline sodium and other environments. Explain to eliminate residual stress when ordering head. 2. Stress corrosion cracking of austenitic stainless steel will occur in the specific environment with chloride ions. Select appropriate materials when designing spherical head. 3. For carbon steel vessels requiring hot galvanizing or aluminizing, heat treatment shall be carried out first to remove residual stress Titanium grade 12 pipe (Ti-0.3Mo-0.8Ni) Chemical compositions(weight%,<=) Mo Ni Fe C N 0.2-0.4 0.6-0.9 0.30 0.08 0.03 H O Ti Others Total 0.015 0.25 Remainder 0.10 0.40 Physical properties(>=) Σb Tensile Strength (Mpa) σr0.2 Yield Strength (Mpa) δL0+50mm Elongation (%) ψ Reduction of area (%) 440 345 18

Product name:Titanium Dished Head Standard: ASME VIII-I, DIN28013 Material: Titanium GR1, GR2 Size: Customized Titanium Dished Head The most common dish heads are the Ellipsoidal head the Hemispherical head. Heads are widely used in heat exchanger/pressure vessel equipment such as power generation, seawater desalination, water treatment, chemical processing and oil and gas exploration industries. Product name: Titanium dished head Standard: According to DIN28013 Grade: GR1, GR2 Quality Inspection: 100% Ultrasonic Test and PT test after forming. Process: Cold forming and Hot forming Fabrication: According to ASME VIII-I standard. Application:Used for Pressure Vessel Equipment Classification of the head Ellipsoid head, hemispherical head and hyperboloid head are three types of ASME pressure vessel disc head. Ellipsoidal head This is also known as a 2:1 oval head. This head shape is more economical because the height of the head is only a quarter of its diameter. Its radius varies between the major axis and the minor axis. Hemispherical head A sphere is the ideal shape for the head because the pressure in the container is evenly distributed over the surface of the head. The head radius (R) is equal to the radius of the cylindrical part of the container. Spherical head of complex surface These have a disc head with a fixed radius (CR), the size of which depends on the type of spherical head. The transition between the cylinder and the plate is called the knuckle. The steering knuckle is circular. Chemical composition (Wt%) ASTM No. Fe max O max N max C max H max Pd Al Bal Grade 1 0.2 0.18 0.03 0.1 0.015 - - Ti Grade 2 0.3 0.25 0.03 0.1 0.015 - - Ti Physical Properties (Min) ASTM Grade Alloy Composition Tensile Strength Yield Strength Elongation min % ksi Mpa ksi Mpa Grade 1 Unalloyed Ti ("Pure") 35A -CP1 35 240 25 170 30 Grade 2 Unalloyed Ti ("Pure") 50A -CP2 58 400 40 275 25

Product name: Titanium Elliptical Dish Tank Head Standard: ASME VIII-I, DIN28013 Material: GR1, GR2, GR7, GR12 Size: Customized Titanium Elliptical Dish Tank Head The Elliptical Dish Tank Head is the lid of the pressure vessel and the main bearing part of the pressure vessel. Its function is to seal. One is an upper and lower pressure vessel consisting of a tank, and the other end is a pipe, which does not extend forward, and is then welded to seal the pipe in the form of a header. The head of the product acts like a blind and a lid, but both can be removed. And the head can not be removed after welding. With support pressure vessels, pipes, flanges, elbows, tees, stone products. The quality of Elliptical Dish Tank Head /dish head is directly related to the long-term safe and reliable operation of pressure vessel. Diameter 300 mm to 2000 mm Shape Round Thickness 1 to 16 mm Process Industrial use Material grade CP4 - level; CP3 - secondary; Titanium contact international.like apply SSDS - level 3; CP1 - level 4; Seven; ; Grade 11 -CP ti-0.15pd; Grade 5 - Titanium 6Al-4V; Grade 6 -- Titanium 5Al-2.5Sn; Grade 9 - Titanium 3Al-2.5V; 12-0.8 Ni Ti - 0.3 - Mo -; Grade 19 - Titanium βC; Grade 23 - Titanium 6Al-4V ELI; 6, 6 v - 2 sn; 6 al zr - 2-2 sn - 4 mo; 6 al zr - 2 sn - 4-6 mo; Mo 8 al - 1-1 v. Fe 10 v - 2-3 al; 15 v - 3 cr - 3 sn - 3 al; Alpha alloy; Beta alloy; Alpha beta alloy Purpose Forging Features Solid construction Smooth Finish High quality Type of disk head/endcaps/head: Ellipsoidal head This is also known as a 2:1 oval head. This head shape is more economical because the height of the head is only a quarter of its diameter. Its radius varies between the major axis and the minor axis. Hemispherical head A sphere is the ideal shape for the head because the pressure in the container is evenly distributed over the surface of the head. The head radius (R) is equal to the radius of the cylindrical part of the container. Torispherical head These have a disc head with a fixed radius (CR), the size of which depends on the type of spherical head. The transition between the cylinder and the plate is called the knuckle. The steering knuckle is circular. Klopper head This is a spherical head. The radius of the plate is equal to the diameter of the cylinder to which it is attached. The radius of the knuckle is equal to one tenth of the diameter of the cylinder. Korbbogen head This is a hemispherical head, also known as a hemispherical head (DIN 28013). The radius of the disk is 80% of the diameter of the cylinder (CR=0.8 x D0.). The radius of the knuckle is (KR= 0.154x D0).

Product name:Titanium Hemispherical Dish Head Standard: ASME VIII-I, DIN28013 Material: Titanium GR1, GR2 Size: Customized Titanium Hemispherical Dish Head Material: titanium, titanium alloy Outer diameter: dn15-dn1200 Wall thickness: sch5-sch160. Standard: ASME DIN JIS BS Scope of application: petrochemical industry, nuclear power, machinery, medical equipment, chemical fertilizer, shipbuilding, waterproof treatment, pipeline, etc Purpose: pipe fittings welded on the pipe end or installed on the external thread of the pipe end to cover and block the pipe. It is used to close the pipeline and has the same function as the pipe plug. The pipe cap includes the design of convex pipe cap, conical shell, reducing section, flat cover and tightening mouth. The most common types of spherical head: Pan head This is a spherical head. The radius of the plate is equal to the diameter of the cylinder to which it is attached. The radius of the knuckle is equal to one tenth of the diameter of the cylinder. Ellipsoidal head This is a semicircular head, also known as a semicircular ellipsoid head. The radius of the disk is 90.45% of the diameter of the cylinder (ICR=0.9045 x od). The radius of the steering knuckle is (IKR=0.1729 x od).