'critical pharmaceutical industry'

Ladhani Metal Corporation offers SS 316L Boiler Half Round Tube Shields designed to provide reliable protection for straight boiler and heat exchanger tubes operating in corrosive, high-moisture, and high-temperature environments. SS 316L is particularly suited for marine, chemical, and pharmaceutical boiler systems where both corrosion resistance and cleanliness are critical. The shields are precision-formed into a half-round profile to ensure a secure fit over the tube surface, creating a strong barrier against soot blower impact, abrasive ash particles, and corrosive condensates. This design not only extends the operational life of boiler tubes but also reduces maintenance and downtime. Ladhani Metal Corporation manufactures, supplies, and exports SS 316L Boiler Half Round Tube Shields in a wide range of diameters, lengths, and thicknesses to meet both domestic and international standards. SS 316L Grade Chemical Composition – Austenitic Stainless Steel • Carbon (C): ≤ 0.03% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 16.0 – 18.0% • Nickel (Ni): 10.0 – 14.0% • Molybdenum (Mo): 2.0 – 3.0% • Iron (Fe): Balance Uses • Protection of straight boiler tubes in corrosive marine and coastal environments • Shields against chemical attack in refineries and petrochemical boilers • Prevents tube wear and scaling in moist flue gas areas • Suitable for heat recovery systems in chemical, food, and pharmaceutical plants • Effective in boilers handling chloride-containing fuels or feedwater Features • Excellent corrosion resistance – Withstands chloride-rich and acidic conditions • Low carbon content – Minimizes risk of sensitization during welding • Long service life – Protects against erosion, scaling, and pitting corrosion • Precision fit – Half-round profile ensures complete tube surface coverage • Flexible installation – Can be clamped, welded, or banded • Export quality – Produced to meet global performance and dimensional standards Applications • Marine and offshore boilers – Resistance to seawater-induced corrosion • Food and beverage processing – Meets hygiene and durability requirements • Chemical and pharmaceutical boilers – Withstands aggressive process vapors • Waste heat boilers – Protection against moist and corrosive flue gas exposure Conclusion The SS 316L Boiler Half Round Tube Shield from Ladhani Metal Corporation combines superior corrosion resistance, low-carbon weldability, and precise fit to ensure long-lasting boiler tube protection in challenging environments. Designed for both domestic and export applications, these shields are an ideal choice for industries requiring durability, hygiene, and resistance to aggressive operating conditions. For technical details, sizing options, or international supply inquiries, contact Ladhani Metal Corporation. #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Salem #Erode #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Hassan #Cuttack #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Gaya #Muzaffarpur#halftubeshield #utypehalftubeshield #tubeshieldexporter #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier #SSShielding #IndustrialTubeShield #BoilerTubeGuard #CustomMetalParts #SteelIndustryIndia #MetalEngineering #HeavyIndustrySupply #StainlessSteelIndia #SteelExporters #MetalComponentExport #FabricatedProducts #SteelDealer #IndustrialSupplyIndia #BoilerTubeFittings #TubeShieldingSolutions #HalfTubeCover #HeatExchangerShield

Half Round Tube Shield Ladhani Metal Corporation manufactures SS 316L Half Round Straight Tube Shields to provide corrosion-resistant protection for straight tubes in boilers, economizers, heat exchangers, and steam systems. SS 316L is a low-carbon version of SS 316, offering excellent resistance to intergranular corrosion, particularly after welding. These shields are suitable for use in chemical plants, marine environments, and flue gas systems with high chloride or acidic content. SS 316L Half Round Straight Tube Shield The SS 316L Half Round Straight Tube Shield is designed to fit securely over the outer surface of straight tubes, shielding them from erosive gas flow, thermal fatigue, and corrosive deposits. Its low carbon content ensures minimal carbide precipitation during welding, making it ideal for systems requiring extensive fabrication or exposure to corrosive condensates. SS 316L shields are used in high-humidity areas and aggressive service conditions to extend the life and performance of pressure tubes. Ladhani Metal Corporation is a leading manufacturer, supplier, and exporter of SS 316L Half Round Straight Tube Shields, offering precision-engineered solutions for industrial thermal protection. Material Grade SS 316L – Austenitic stainless steel with low carbon for superior corrosion resistance and post-weld performance. Chemical Composition of SS 316L • Carbon (C): ≤ 0.03% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 16.0 – 18.0% • Nickel (Ni): 10.0 – 14.0% • Molybdenum (Mo): 2.0 – 3.0% • Iron (Fe): Balance Applications: Designed for welded and corrosion-sensitive systems such as boilers operating with acidic flue gas or chloride-laden environments. Uses • Protection of straight tubes in superheaters, economizers, and marine boilers • Suitable for chemical processing and desulfurization units • Used in wet flue gas paths of waste heat boilers • Shields steam lines and heat exchangers exposed to brine or acidic residues • Installed in paper, pulp, and food processing equipment with steam applications Features • Superior corrosion resistance – Especially in acidic and chloride-rich environments • Low carbon content – Prevents sensitization and supports post-weld integrity • High durability – Withstands thermal cycling, oxidation, and chemical attack • Precise fit – Manufactured to match specific tube diameters and wall clearances • Quick installation – Clamp-on, weld-on, and banding options available • Improves tube longevity – Reduces wear and the need for premature replacement Applications • power generation – Protects straight tubes in low-temperature and high-moisture flue zones • marine and offshore – Ideal for steam systems exposed to saltwater vapor • petrochemical and fertilizer plants – Prevents corrosion in chemical-laden environments • WHRBs and gas turbines – Shields tube surfaces from acidic or condensate-rich exhaust gases • food and pharmaceutical – Used where corrosion resistance and cleanliness are critical Conclusion The SS 316L Half Round Straight Tube Shield from Ladhani Metal Corporation provides enhanced resistance to corrosion, particularly in welded or moisture-prone areas. Its low carbon chemistry and molybdenum-enhanced durability make it a dependable choice for long-term tube protection in harsh thermal and chemical conditions. For tailored dimensions, technical support, or bulk supply inquiries, contact Ladhani Metal Corporation. #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Salem #Erode #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Hassan #Cuttack #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Gaya #Muzaffarpur #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier #SSShielding #IndustrialTubeShield

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are precision-formed protective components used to shield exposed tubes in boilers, heat exchangers, and high-temperature piping systems. Designed to withstand harsh environments, they provide long-term protection against corrosion, erosion, and thermal damage, significantly improving the operational life and reliability of industrial systems. SS 316 Half Round Tube Shield The SS 316 Half Round Tube Shield is a semi-cylindrical cover made from austenitic stainless steel grade 316. Known for its superior corrosion resistance and mechanical strength, SS 316 is especially effective in chloride-rich environments such as marine, chemical, and coastal processing industries. The shield is engineered to fit over existing tubes, acting as a barrier against high-temperature gases, steam erosion, and corrosive media. Its molybdenum-enriched composition enhances pitting and crevice corrosion resistance, making it ideal for aggressive applications. Chemical Composition of SS 316 – Austenitic Stainless Steel • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.00% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.030% • Silicon (Si): ≤ 1.00% • Chromium (Cr): 16.0 – 18.0% • Nickel (Ni): 10.0 – 14.0% • Molybdenum (Mo): 2.0 – 3.0% • Iron (Fe): Balance Uses • Boiler Tube Protection – Provides a robust shield against corrosive flue gases, preventing tube thinning and extending service intervals in industrial boilers. • Heat Exchanger Tube Protection – Reduces erosion and scaling in process systems exposed to fluctuating temperatures and aggressive fluids. • Marine and Coastal Applications – Ideal for protecting piping and steam lines in saltwater environments where chloride-induced corrosion is a major concern. • Chemical Process Tubing – Shields tubes exposed to acidic or caustic compounds, minimizing localized corrosion and chemical wear. • Pharmaceutical and Food Plants – Protects steam and utility tubes while maintaining hygiene and resistance to cleaning agents and sanitizers. Features • Excellent Corrosion Resistance – Molybdenum addition enhances resistance to pitting, crevice corrosion, and chemical attack. • High Strength and Durability – Withstands mechanical stress and thermal cycling without deformation or degradation. • Precision Fit – Half-round profile allows easy installation and secure fitting over tubes with minimal disruption to system performance. • Hygienic Material – Non-reactive and easy to clean, suitable for environments requiring sanitary conditions. • Customizable – Available in a variety of wall thicknesses, diameters, lengths, and mounting styles to meet specific operational needs. • Optional Finishes – Pickled, passivated, and bright annealed surface finishes available for improved appearance and added protection. Applications • Power Generation Boilers – Used in high-pressure steam systems to shield tubes from gas erosion and oxidation. • Chemical Processing Units – Protects tubes in acidic, alkaline, and oxidizing environments across chemical plants and refineries. • Marine Boilers and Engines – Installed on tubes and exhaust lines in marine vessels to resist chloride-induced corrosion. • Pharmaceutical Facilities – Suitable for clean steam systems and sterile environments requiring high resistance to chemical sanitizers. • Food and Beverage Industry – Used in pasteurization, CIP lines, and steam piping where corrosion resistance and cleanliness are essential. • Desalination Plants – Guards tubing systems in brine and saltwater processing units against aggressive corrosion and scaling. Conclusion The SS 316 Half Round Tube Shield by Ladhani Metal Corporation is an advanced protective solution for critical tubing systems operating in corrosive and high-temperature environments. Its enhanced chemical resistance, mechanical strength, and adaptability to sanitary and marine conditions make it an ideal choice for industries requiring long-term reliability and safety. Designed with precision and manufactured to meet strict industrial standards, these shields ensure prolonged tube life, reduced downtime, and improved system performance. Custom-fabricated to match your application, Ladhani Metal Corporation provides dependable shielding solutions trusted across industries worldwide. For detailed specifications, inquiries, or custom orders, please contact Ladhani Metal Corporation.

DIN 2632 stainless steel flanges PN 10 are precision-engineered weld neck flanges manufactured in accordance with the DIN 2632 standard. These flanges are designed for medium-pressure applications up to 10 bar (145 psi), providing strong, leak-proof connections in a wide range of industrial piping systems. Produced from high-quality stainless steel grades such as 304, 316, and 321, they deliver excellent corrosion resistance, mechanical strength, and durability even under moderately demanding environmental and operational conditions. Ladhani Metal Corporation is a globally recognized manufacturer and supplier of stainless steel flanges, committed to consistent quality and engineering accuracy. Each flange is carefully inspected to meet relevant industry standards and environmental regulations. Pressure Rating: • PN 10 (10 bar / 145 psi): Suitable for medium-pressure pipeline systems requiring robust joint integrity and corrosion resistance. Flange Type: • Weld Neck Flanges Designed with a long tapered hub to provide secure pipe alignment and minimize stress concentrations at the flange base. This ensures smooth flow transitions and reduces turbulence. • Flat Face (FF) Flanges Flat face design facilitates even gasket compression and is ideal for systems using cast components or soft gasket materials. Stainless Steel Grades and Full Composition: Stainless Steel 304 • Chromium (Cr): 18.0 – 20.0% • Nickel (Ni): 8.0 – 10.5% • Carbon (C): ≤ 0.08% (304), ≤ 0.03% (304L) • Manganese (Mn): ≤ 2.0% • Silicon (Si): ≤ 1.0% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.03% • Iron (Fe): Balance Applications: Suitable for general-purpose medium-pressure systems including potable water lines, food-grade applications, and light chemical processing. Stainless Steel 316 • Chromium (Cr): 16.0 – 18.0% • Nickel (Ni): 10.0 – 14.0% • Molybdenum (Mo): 2.0 – 3.0% • Carbon (C): ≤ 0.08% (316), ≤ 0.03% (316L) • Manganese (Mn): ≤ 2.0% • Silicon (Si): ≤ 1.0% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.03% • Iron (Fe): Balance Applications: Provides enhanced corrosion resistance for systems exposed to chlorinated water, cleaning chemicals, and mildly acidic environments. Common in pharmaceutical, marine, and chemical processing pipelines. Stainless Steel 321 • Chromium (Cr): 17.0 – 19.0% • Nickel (Ni): 9.0 – 12.0% • Titanium (Ti): ≥ 5 × C (typically 0.20 – 0.70%) • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.0% • Silicon (Si): ≤ 1.0% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.03% • Iron (Fe): Balance Applications: Ideal for moderate temperature and corrosion environments, frequently used in exhaust systems, thermal processing, and hygienic food equipment. Applications of DIN 2632 Stainless Steel Flanges PN 10: • Water Supply and Treatment Used in potable water and wastewater systems requiring medium-pressure handling. • Food and Beverage Industry Suitable for hygienic piping systems that operate at moderate pressures and require corrosion resistance. • Chemical Distribution Commonly used in pipelines carrying diluted or mildly aggressive chemicals. • HVAC and Ventilation Applied in duct flanges and connections for air handling and medium-pressure ventilation systems. Key Features: • Manufactured as per DIN 2632 standards • PN 10 pressure rating for medium-pressure service • Weld neck design enhances pipe-flange joint strength • Available in stainless steel grades 304, 304L, 316, 316L, and 321 • Resistant to corrosion with long service life under mechanical and environmental stresses • Suitable for food-grade, chemical, water, and HVAC applications • Custom sizes, finishes, and material grades available on request Conclusion: DIN 2632 Stainless Steel Flanges PN 10 from Ladhani Metal Corporation are engineered to meet the demands of medium-pressure industrial applications where reliability, corrosion resistance, and durability are critical. Manufactured from premium stainless steel materials, these weld neck flanges provide an economical and dependable solution across sectors such as water treatment, food processing, chemical distribution, and HVAC systems. For custom requirements, technical support, or pricing information, contact Ladhani Metal Corporation today

DIN 2630 stainless steel flanges PN 2.5 are precision-fabricated weld neck flanges produced in accordance with the DIN 2630 standard. These flanges are engineered for low-pressure applications up to 2.5 bar (36.25 psi), providing reliable and leak-resistant connections in light-duty and non-critical piping systems. Manufactured from premium stainless steel grades including 304, 316, and 321, they offer excellent corrosion resistance, mechanical stability, and longevity even in mildly corrosive or intermittent industrial environments. Ladhani Metal Corporation is a globally trusted manufacturer and supplier of stainless steel flanges, known for delivering consistent quality and engineering precision. Ladhani Metal Corporation ensures each flange meets relevant industrial standards and environmental requirements. Pressure Rating: • PN 2.5 (2.5 bar / 36.25 psi): Suitable for low-pressure pipeline systems that require basic joint integrity and corrosion resistance. Flange Type: • Weld Neck Flanges Designed with a long tapered hub to support pipe alignment and reduce stress at the base of the flange. Ensures steady flow transition with minimal turbulence. • Flat Face (FF) Flanges Flat face design ensures even gasket compression and is preferred in systems using cast components or soft gasket materials. Stainless Steel Grades and Full Composition: Stainless Steel 304 • Chromium (Cr): 18.0 – 20.0% • Nickel (Ni): 8.0 – 10.5% • Carbon (C): ≤ 0.08% (304), ≤ 0.03% (304L) • Manganese (Mn): ≤ 2.0% • Silicon (Si): ≤ 1.0% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.03% • Iron (Fe): Balance Applications: Ideal for general-purpose low-pressure systems including potable water lines, food-grade applications, and non-aggressive chemical piping. Stainless Steel 316 • Chromium (Cr): 16.0 – 18.0% • Nickel (Ni): 10.0 – 14.0% • Molybdenum (Mo): 2.0 – 3.0% • Carbon (C): ≤ 0.08% (316), ≤ 0.03% (316L) • Manganese (Mn): ≤ 2.0% • Silicon (Si): ≤ 1.0% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.03% • Iron (Fe): Balance Applications: Offers higher corrosion resistance for systems handling chlorinated water, cleaning agents, or mildly acidic substances. Common in pharmaceutical and marine-grade piping. Stainless Steel 321 • Chromium (Cr): 17.0 – 19.0% • Nickel (Ni): 9.0 – 12.0% • Titanium (Ti): ≥ 5 × C (typically 0.20 – 0.70%) • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.0% • Silicon (Si): ≤ 1.0% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.03% • Iron (Fe): Balance Applications: Best suited for moderate temperature and corrosion conditions. Often used in low-pressure exhaust lines, thermal processing, and food-grade heat equipment. Applications of DIN 2630 Stainless Steel Flanges PN 2.5: • Water Supply and Treatment Used in potable and greywater systems requiring low-pressure fluid conveyance. • Food and Beverage Industry Ideal for hygienic piping with low flow rates and non-corrosive media. • Chemical Distribution Used in systems handling diluted or non-aggressive chemicals. • HVAC and Ventilation Suited for duct flanges and connections in air-handling systems. Key Features: • Compliant with DIN 2630 standards • PN 2.5 pressure class for low-pressure service • Weld neck design for improved pipe-flange connection • Available in stainless steel grades 304, 316, and 321 • Flat face configuration for even gasket contact • Corrosion-resistant and long-lasting under mild mechanical loads • Suitable for food-grade, chemical, and HVAC systems • Custom sizes, finishes, and material grades available upon request Conclusion: DIN 2630 Stainless Steel Flanges PN 2.5 from Ladhani Metal Corporation are optimized for low-pressure industrial applications where corrosion resistance, hygiene, and operational simplicity are key. Made from high-grade stainless steel materials, these weld neck flanges offer a reliable, economical solution for various sectors including water distribution, food processing, and light chemical service. For custom dimensions, technical consultation, or pricing details, contact Ladhani Metal Corporation today.

DIN 2628 stainless steel flanges PN 250 are precision-engineered weld neck flanges manufactured according to the DIN 2628 standard. Designed for high-pressure applications up to 250 bar (3625 psi), these flanges are essential for maintaining strength and leak-free connections in critical piping systems. Made from premium stainless steel grades such as 304, 316, and 321, these flanges offer exceptional mechanical stability, corrosion resistance, and durability under severe industrial operating conditions. Ladhani Metal Corporation is a leading manufacturer and supplier of stainless steel flanges. Our DIN 2628 PN 250 weld neck flanges are trusted in demanding sectors including oil and gas, chemical plants, marine engineering, energy infrastructure, and high-pressure process systems for their consistent quality and dependable performance. Pressure Rating: • PN 250 (250 bar / 3625 psi): Engineered for high-pressure piping systems requiring superior joint integrity and long-term sealing reliability. Flange Type: • Weld Neck Flanges Designed with a long tapered hub for high-stress applications. These flanges ensure smooth flow transition and minimize turbulence and erosion in the pipe system. • Flat Face (FF) Flanges Flat face design ensures uniform gasket compression and is suitable for systems using cast components or where flange distortion must be avoided. Stainless Steel Grades and Full Composition: Stainless Steel 304 / 304L (UNS S30400 / S30403) • Chromium (Cr): 18.0 – 20.0% • Nickel (Ni): 8.0 – 10.5% • Carbon (C): ≤ 0.08% (304), ≤ 0.03% (304L) • Manganese (Mn): ≤ 2.0% • Silicon (Si): ≤ 1.0% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.03% • Iron (Fe): Balance Applications: Suitable for general-purpose corrosion resistance. Commonly used in food processing, water treatment, and chemical piping. Stainless Steel 316 / 316L (UNS S31600 / S31603) • Chromium (Cr): 16.0 – 18.0% • Nickel (Ni): 10.0 – 14.0% • Molybdenum (Mo): 2.0 – 3.0% • Carbon (C): ≤ 0.08% (316), ≤ 0.03% (316L) • Manganese (Mn): ≤ 2.0% • Silicon (Si): ≤ 1.0% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.03% • Iron (Fe): Balance Applications: Excellent resistance to chloride environments and acidic media. Widely used in marine, pharmaceutical, and chemical process plants. Stainless Steel 321 (UNS S32100) • Chromium (Cr): 17.0 – 19.0% • Nickel (Ni): 9.0 – 12.0% • Titanium (Ti): ≥ 5 × C (typically 0.20 – 0.70%) • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.0% • Silicon (Si): ≤ 1.0% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.03% • Iron (Fe): Balance Applications: Titanium-stabilized alloy suited for high-temperature service and excellent resistance to intergranular corrosion. Common in thermal processing and aerospace exhaust systems. Applications of DIN 2628 Stainless Steel Flanges PN 250: • Oil and Gas Sector Used in pressure-critical pipelines, wellheads, and refining equipment. • Chemical and Petrochemical Industry Ideal for corrosive chemical service lines and pressurized chemical tanks. • Marine and Offshore Applications Used in seawater systems and high-pressure marine piping. • Energy and Power Generation Applied in steam, boiler, and high-pressure turbine piping systems. Key Features: • Compliant with DIN 2628 standards • PN 250 pressure class for high-pressure service • Weld neck design for optimal stress distribution • Available in stainless steel grades 304, 304L, 316, 316L, and 321 • Flat face option for uniform sealing and flange safety • Corrosion-resistant and robust under mechanical loads • Applicable in aggressive chemical, marine, and high-temperature environments • Custom sizes, materials, and finishes available upon request Conclusion: DIN 2628 Stainless Steel Flanges PN 250 from Ladhani Metal Corporation are engineered for high-pressure operations where integrity, reliability, and corrosion resistance are paramount. Available in a range of stainless steel materials including 304, 316, and 321, these weld neck flanges provide superior sealing and strength across demanding industrial sectors. Contact Ladhani Metal Corporation for custom solutions, technical assistance, or a detailed quotation.

DIN 2627 stainless steel flanges PN 400 are precision-engineered blind flanges manufactured according to the DIN 2627 standard. Designed to withstand ultra-high-pressure conditions up to 400 bar (5800 psi), these flanges are used to terminate or isolate piping systems safely and effectively. Fabricated from high-grade stainless steels, including 304, 316, and 321, these blind flanges provide superior mechanical strength, corrosion resistance, and long service life in aggressive industrial environments. Ladhani Metal Corporation is a globally recognized manufacturer and exporter of stainless steel flanges. Our DIN 2627 PN 400 blind flanges are widely trusted in sectors such as oil and gas, chemical processing, marine, energy, and high-pressure utility systems for their durability, quality, and performance under extreme conditions. Pressure Rating: • PN 400 (400 bar / 5800 psi): Suitable for high-pressure pipelines and critical systems where absolute sealing and structural integrity are required. Flange Type: • Blind Flanges Solid, non-bored flanges used to block pipeline ends or vessel nozzles. These flanges are essential for system isolation during maintenance, testing, or future expansions. • Flat Face (FF) Flanges Flat face flanges are designed to mate with flat gaskets and flat-faced components. They provide even gasket compression and are ideal when used with cast iron or brittle materials to avoid flange distortion. Stainless Steel Grades and Full Composition: Stainless Steel 304 • Chromium (Cr): 18.0 – 20.0% • Nickel (Ni): 8.0 – 10.5% • Carbon (C): ≤ 0.08% (304), ≤ 0.03% (304L) • Manganese (Mn): ≤ 2.0% • Silicon (Si): ≤ 1.0% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.03% • Iron (Fe): Balance Applications: Excellent general corrosion resistance. Commonly used in food processing, water systems, and chemical equipment. Stainless Steel 316 • Chromium (Cr): 16.0 – 18.0% • Nickel (Ni): 10.0 – 14.0% • Molybdenum (Mo): 2.0 – 3.0% • Carbon (C): ≤ 0.08% (316), ≤ 0.03% (316L) • Manganese (Mn): ≤ 2.0% • Silicon (Si): ≤ 1.0% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.03% • Iron (Fe): Balance Applications: Enhanced resistance to chlorides and acidic environments. Ideal for marine, pharmaceutical, and chemical processing. Stainless Steel 321 • Chromium (Cr): 17.0 – 19.0% • Nickel (Ni): 9.0 – 12.0% • Titanium (Ti): ≥ 5 × C (typically 0.20 – 0.70%) • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.0% • Silicon (Si): ≤ 1.0% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.03% • Iron (Fe): Balance Applications: 321 stainless steel is stabilized with titanium, providing excellent resistance to intergranular corrosion after welding and high-temperature exposure. Commonly used in thermal processing, aerospace, and exhaust systems. Applications of DIN 2627 Stainless Steel Flanges PN 400: • Oil and Gas Industry Used in upstream and downstream systems, where high pressure and harsh chemicals are common. • Chemical and Petrochemical Plants Ideal for isolating high-pressure lines carrying corrosive or reactive chemicals. • Marine and Offshore Engineering Suitable for saltwater-exposed piping, ballast systems, and underwater applications requiring corrosion resistance. • Power Generation Applied in steam, nuclear, and thermal plants for sealing pressurized piping and vessel systems. • Aerospace and High-Temperature Systems 321-grade blind flanges are used in systems exposed to elevated temperatures and thermal cycling. • Water Treatment and Desalination Withstands chloride-induced corrosion in high-pressure brine and filtration lines. Key Features: • Manufactured to DIN 2627 specifications • PN 400 pressure rating for extreme pressure performance • Blind flange design ideal for system isolation and termination • Available in stainless steel grades 304, 304L, 316, 316L, and 321 • Flat face type for even gasket compression and sealing integrity • Superior corrosion resistance and mechanical strength • Suitable for aggressive chemical, marine, and high-temperature environments • Custom sizes, surface finishes, and pressure classes available upon request Conclusion: DIN 2627 Stainless Steel Flanges PN 400 by Ladhani Metal Corporation are designed for maximum performance in high-pressure, corrosive, and high-temperature environments. With material options including 304, 316, and titanium-stabilized 321 stainless steel, these blind flanges offer flexibility, reliability, and long-term service life across critical industries. Contact Ladhani Metal Corporation today for technical assistance, specifications, or custom flange solutions.

DIN 2573 Titanium Flanges PN 6 are lightweight, corrosion-resistant plate flanges manufactured to DIN 2573 standards, specifically designed for low-pressure industrial and chemical applications. Fabricated from premium-grade titanium, these flanges are known for their exceptional strength-to-weight ratio, biocompatibility, and superior corrosion resistance, especially in aggressive environments involving chlorides, seawater, and oxidizing agents. DIN 2573 titanium flanges are ideal for critical applications across industries such as chemical processing, desalination, offshore engineering, medical systems, and aerospace. Ladhani Metal Corporation is a trusted supplier and exporter of precision-engineered titanium flanges, delivering products that meet stringent global quality standards. The DIN 2573 design, combined with the inherent material advantages of titanium, ensures long-lasting performance and ease of integration in low-pressure piping systems. Pressure Rating: • PN 6 (6 bar / 87 psi): Suitable for low-pressure pipelines and systems where outstanding corrosion resistance and long service life are essential, even under chemically aggressive or saline conditions. Flange Types: • Plate Flanges Standard flat flanges designed for bolted connections with gasket sealing, suitable for low-pressure service. • Flat Face (FF) Flanges Ensures full contact with mating flanges or non-metallic components to prevent stress cracking or uneven loading. • Slip-On Flanges Allow for easy alignment and welding, widely used in systems where frequent maintenance or disassembly is required. • Custom-Machined Flanges Available in custom sizes, dimensions, and titanium grades to suit specific project or industry needs. Titanium Grades and Composition: 1. Grade 2 (Commercially Pure Titanium) Composition: • Titanium (Ti): ≥ 99.2% • Iron (Fe): ≤ 0.30% • Oxygen (O): ≤ 0.25% • Carbon (C): ≤ 0.08% • Nitrogen (N): ≤ 0.03% • Hydrogen (H): ≤ 0.015% Applications: Used in desalination plants, chemical handling, marine equipment, and medical fluid systems due to its excellent formability, corrosion resistance, and biocompatibility. 2. Grade 5 (Ti-6Al-4V – Titanium Alloy) Composition: • Titanium (Ti): Balance • Aluminum (Al): 5.5 – 6.75% • Vanadium (V): 3.5 – 4.5% • Iron (Fe): ≤ 0.40% • Oxygen (O): ≤ 0.20% Applications: Preferred in aerospace, high-performance marine, and industrial applications requiring superior mechanical strength, wear resistance, and corrosion protection. Applications of DIN 2573 Titanium Flanges: • Chemical and Petrochemical Plants: Ideal for conveying aggressive acids, chlorides, and alkalis in low-pressure systems. • Desalination and Marine Systems: Exceptional resistance to seawater corrosion makes them suitable for brine, saltwater, and offshore structures. • Medical and Pharmaceutical Equipment: Non-toxic and biocompatible properties support sterile piping systems for fluids and gases. • Aerospace and Defense: Lightweight and high-strength material enhances performance in low-pressure structural and fuel systems. Key Features: • Manufactured according to DIN 2573 specifications • Designed for PN 6 low-pressure applications • Superior corrosion resistance in marine and chemical environments • Lightweight with high structural strength • Suitable for welding, pickling, passivation, and surface customization • Available in Grade 2, Grade 5, and other titanium alloys Conclusion: DIN 2573 Titanium Flanges PN 6 by Ladhani Metal Corporation offer a high-performance, corrosion-resistant solution for low-pressure systems exposed to harsh environments. With excellent mechanical properties and unmatched longevity, these titanium flanges serve critical roles in chemical, marine, medical, and water treatment industries. For detailed specifications, custom sizes, or material selection assistance, contact Ladhani Metal Corporation.

DIN 2568 Titanium Flanges PN 64 are precision-engineered threaded flanges manufactured from high-performance titanium alloys, designed to meet the rigorous demands of high-pressure and highly corrosive industrial environments. Built to DIN 2568 specifications, these flanges deliver exceptional corrosion resistance, high strength-to-weight ratio, and thermal stability, making them ideal for use in specialized sectors such as chemical processing, marine systems, aerospace, medical, and desalination plants. Ladhani Metal Corporation is a trusted manufacturer and exporter of titanium flanges, offering products that conform to international quality and dimensional standards. The threaded design supports easy, weld-free installation and disassembly, particularly beneficial in applications requiring frequent maintenance or rapid assembly in corrosive settings. Pressure Rating: • PN 64 (64 bar / 928 psi): Specifically engineered for high-pressure applications in harsh environments where both mechanical reliability and corrosion resistance are critical. Flange Types: • Threaded (Screwed) Flanges Facilitates easy assembly and removal, suitable for systems under routine inspection or component replacement. • Raised Face (RF) Flanges Improves gasket performance and leak-proof sealing in high-pressure and high-temperature applications. • Flat Face (FF) Flanges Ideal for use with equipment made from brittle or non-metallic materials to ensure even load distribution. • Forged Threaded Flanges Offers superior strength, precise tolerances, and excellent fatigue resistance. • Custom-Machined Flanges Available in multiple sizes, titanium grades, and configurations to meet project-specific requirements. Available Titanium Grades and Composition: 1. Grade 2 (Commercially Pure Titanium) Composition: • Titanium (Ti): ≥ 98.9% • Iron (Fe): ≤ 0.30% • Oxygen (O): ≤ 0.25% • Carbon (C): ≤ 0.08% • Nitrogen (N): ≤ 0.03% • Hydrogen (H): ≤ 0.015% Applications: Widely used in chemical processing, desalination, and medical systems due to excellent corrosion resistance, formability, and weldability. 2. Grade 5 (Ti-6Al-4V, Titanium Alloy) Composition: • Titanium (Ti): Balance • Aluminum (Al): 5.5 – 6.75% • Vanadium (V): 3.5 – 4.5% • Iron (Fe): ≤ 0.40% • Oxygen (O): ≤ 0.20% Applications: Preferred in aerospace, marine, and high-performance engineering applications due to its high strength, lightweight nature, and resistance to fatigue and cracking. Applications of DIN 2568 Titanium Flanges: • Chemical and Petrochemical Plants: Used in aggressive chemical environments including acid production and chlor-alkali plants. • Marine and Offshore Engineering: Ideal for seawater exposure, underwater pipelines, and offshore installations. • Aerospace and Defense: Applied in fuel systems, hydraulics, and high-stress structural components. • Medical and Pharmaceutical Industry: Suitable for biocompatible and sterile processing systems. • Water Treatment and Desalination Plants: Used in brine handling systems and long-service, corrosion-prone environments. Key Features: • Manufactured to DIN 2568 standard • Available in PN 64 pressure rating • Outstanding resistance to corrosion, erosion, and seawater attack • High strength-to-weight ratio and excellent fatigue performance • Threaded design allows weld-free, fast installation and maintenance • Supplied with material test certificates and full traceability • Can be supplied with specialized surface finishes including anodizing or pickling Conclusion: DIN 2568 Titanium Flanges PN 64 from Ladhani Metal Corporation combine advanced material properties with precision engineering to offer a premium solution for high-pressure, corrosive, and high-performance applications. These flanges are engineered for longevity, reliability, and ease of use in the most demanding environments. For detailed specifications, custom machining, or technical support, contact Ladhani Metal Corporation today.