'conventional stainless steels'

Ladhani Metal Corporation offers Stainless Steel Half Round Tube Shields designed to protect boiler tubes from erosion, corrosion, oxidation, and mechanical wear in power plants, refinery heaters, waste heat recovery boilers (WHRBs), and heat recovery steam generators (HRSGs). These shields are semi-cylindrical tube covers fitted over vulnerable sections of boiler tubes to prevent premature thinning caused by high-velocity flue gases, abrasive ash particles, and soot blower impact. By acting as a sacrificial protective layer, Stainless Steel Half Round Tube Shields significantly extend tube service life and improve boiler reliability. Function of Tube Shields • Protect boiler tubes from erosion, corrosion, and scaling • Reduce tube wear in high-temperature and high-flow zones • Minimize shutdowns and maintenance costs • Extend overall efficiency and durability of the boiler system Ladhani Metal Corporation manufactures, supplies, and exports Stainless Steel Half Round Tube Shields in a wide range of standard and custom specifications to meet domestic and international project requirements. Available Grades • SS 304 / SS 304L • SS 310 / SS 310S • SS 316 / SS 316L • SS 410 / SS 420 / SS 430 • 1Cr13 • 1Cr18Ni9Ti • 1Cr20Ni14Si2 • 1Cr25Ni20Si2 • Cr23Ni13 • Cr25Ni20 Applications: Extensively used in thermal power plants, waste heat recovery units, refinery heaters, petrochemical furnaces, HRSGs, and industrial boilers operating in erosive and corrosive environments. Uses • Protects boiler tubes against flue gas erosion and oxidation • Shields reheater and superheater tubes in high-temperature zones • Guards economizer and LTSH sections from ash erosion • Extends operational life in refinery and process heaters Features • Excellent corrosion and oxidation resistance at elevated temperatures • High mechanical strength and durability under cyclic heating • Precision-engineered for accurate fit over tube diameter • Easy installation, removal, and replacement during maintenance Applications • Power generation boilers – Tube protection in superheaters and reheaters • HRSGs – Reliable under frequent thermal cycling • Waste heat recovery boilers – Protection against abrasive and corrosive flue gases • Refinery and petrochemical heaters – Enhanced durability in aggressive atmospheres Conclusion Stainless Steel Half Round Tube Shields for Boilers from Ladhani Metal Corporation are engineered to provide superior protection against erosion, corrosion, and oxidation in demanding boiler environments. Manufactured in stainless steels and heat-resistant alloys, these shields ensure long service life, reduced downtime, and export-ready quality for global energy and industrial applications. #Mumbai #Pune #Ahmedabad #Vadodara #Surat #Rajkot #Jamnagar #Bharuch #Ankleshwar #Vapi #Delhi #Faridabad #Ghaziabad #Noida #Gurugram #Chennai #Coimbatore #Tiruchirappalli #Hyderabad #Visakhapatnam #Vijayawada #Bangalore #Mangalore #Mysore #Kolkata #Durgapur #Asansol #Bhubaneswar #Rourkela #Raipur #Bhilai #Bilaspur #Nagpur #Nashik #Aurangabad #Indore #Bhopal #Jabalpur #Kanpur #Lucknow #Varanasi #Jaipur #Kota #Udaipur #Jodhpur #Chandigarh #Ludhiana #Jalandhar #Haridwar #Dehradun #Agra #Meerut #Aligarh #Moradabad #Bareilly #Mathura #Gwalior #Rewa #Satna #Sagar #Ujjain #Ratlam #Solapur #Kolhapur #Amravati #Akola #Jalgaon #Latur #Sangli #Nanded #Gandhinagar #Bhavnagar #Mehsana #Surendranagar #Junagadh #Nadiad #Nizamabad #Karimnagar #Warangal #Kurnool #Nellore #Tirupati #Madurai #Tirunelveli #Thoothukudi #Belgaum #Hubli #Tumkur #Sambalpur #Jamshedpur #Ranchi #Dhanbad #Patna #Muzaffarpur#halftubeshield #utypehalftubeshield #tubeshieldexporter #TubeShield #HalfTubeShield #SSHalfRoundShield #BoilerTubeShield #BoilerShield #TubeProtection #Tubeshieldmanufacturer #BoilerTubeProtection #SSTubeShield #MetalIndustry #SteelFabrication #IndustrialShielding #SS304Shield #SS316Shield #StainlessSteelShield #WeldOnShield #WeldedTubeShield #TubeCladding #BoilerTubeSleeve #TubeSleeve #MetalFabrication #PowerPlantSupplies #RefineryEquipment #ProcessIndustry #MetalComponent #TubeShieldForBoilers #BoilerParts #SteelSolutions #TubeShieldManufacturer #TubeShieldSupplier #SSShielding #IndustrialTubeShield #BoilerTubeGuard #CustomMetalParts #SteelIndustryIndia #MetalEngineering #HeavyIndustrySupply #StainlessSteelIndia #SteelExporters #MetalComponentExport #FabricatedProducts #SteelDealer #IndustrialSupplyIndia #BoilerTubeFittings #TubeShieldingSolutions #HalfTubeCover #HeatExchangerShield #HalfRoundReheaterShield #ReheaterTubeShield #BoilerReheaterProtection #PowerPlantTubeShield #BoilerErosionShield #SteamBoilerTubeShield #HighTempTubeShield #BoilerWearProtection

Half Round Tube Shield Half Round Tube Shields by Ladhani Metal Corporation are high-performance components designed to protect heat exchanger and boiler tubes from thermal damage, erosion, and high-temperature corrosion. These shields play a vital role in extending tube life and ensuring stable operation in demanding industrial environments such as petrochemical plants, power generation facilities, and high-temperature furnaces. 1Cr25Ni20Si2 Half Round Tube Shield The 1Cr25Ni20Si2 Half Round Tube Shield is a semi-cylindrical tube protector made from a heat-resistant alloy consisting of 25% chromium, 20% nickel, and 2% silicon. This alloy is known for its outstanding resistance to oxidation, carburization, and scaling at elevated temperatures, often exceeding 1100°C. The presence of silicon further enhances its oxidation resistance by forming a stable protective film on the surface. These shields are precision-formed in a half-round profile for easy clamping or welding over the tube surface, delivering a tight and durable fit. Chemical Composition of 1Cr25Ni20Si2 – Heat-Resistant ss Austenitic Alloy • Carbon (C): ≤ 0.20% • Silicon (Si): 1.50 – 2.50% • Manganese (Mn): ≤ 1.50% • Phosphorus (P): ≤ 0.035% • Sulfur (S): ≤ 0.030% • Chromium (Cr): 24.0 – 26.0% • Nickel (Ni): 19.0 – 22.0% • Iron (Fe): Balance Uses • Superheater and Reheater Tube Protection – Shields tubes from oxidation and metal dusting under high steam and flue gas temperatures in utility boilers. • Furnace Tube Protection – Prevents damage from flame impingement, scaling, and spalling in radiant and convection furnace zones. • Reforming and Cracking Units – Used in petrochemical plants to protect process tubes from carburization and oxidation during prolonged high-temperature service. • Air Preheaters and Heat Recovery Systems – Guards tubes from thermal fatigue and corrosive ash erosion in waste heat systems. • Gas-Fired and Biomass Boilers – Applied to protect critical tube sections exposed to high-velocity combustion gases and corrosive deposits. Features • Superior Oxidation Resistance – The combination of chromium, nickel, and silicon provides long-term stability in oxidizing environments above 1000°C. • Excellent Carburization and Sulfidation Resistance – Performs well in carbon-rich and sulfur-laden atmospheres, making it ideal for petrochemical service. • High Mechanical Strength – Retains structural integrity under thermal cycling and mechanical load at elevated service temperatures. • Precision Half-Round Design – Ensures easy fitment over existing tubes with minimal disruption to equipment layout or flow design. • Enhanced Surface Protection – Silicon contributes to the formation of a dense oxide scale, minimizing material loss due to scaling. • Custom Dimensions – Available in a range of thicknesses, diameters, and lengths with optional surface treatments like bright annealing and passivation. Applications • Thermal Power Plants – Used in critical boiler zones such as superheaters and economizers where high-temperature oxidation resistance is required. • Petrochemical and Refining Industries – Deployed in reformers, ethylene crackers, and process gas heaters where tubes face carburizing and oxidizing atmospheres. • Metallurgical Furnaces – Protects tubes and gas paths in steel, non-ferrous, and heat treatment furnaces operating under extreme thermal conditions. • Waste-to-Energy Systems – Shields boiler tubes and superheaters from corrosive ash and high flue gas temperatures in incinerators and biomass units. • Cement and Glass Plants – Guards heat recovery and exhaust handling tubes from scaling and thermal wear in rotary kilns and regenerative chambers. Conclusion The 1Cr25Ni20Si2 Half Round Tube Shield by Ladhani Metal Corporation is engineered for high-performance protection in environments where conventional stainless steels may fail. Its exceptional resistance to oxidation, carburization, and high-temperature scaling makes it a preferred solution for boiler, furnace, and heat exchanger tube protection across several heavy industries. With customizable sizes, expert fabrication, and material certifications, Ladhani Metal Corporation delivers reliable and long-lasting shielding components designed to enhance system integrity, reduce maintenance costs, and ensure uninterrupted operation under extreme thermal stress. For specification or to request a quotation, please contact Ladhani Metal Corporation.

DIN 2627 Super Duplex Steel flanges PN 400 are robust, high-performance blind flanges engineered for extremely demanding applications requiring exceptional strength, corrosion resistance, and reliability under ultra-high-pressure conditions. Designed according to the DIN 2627 standard, these flanges are primarily used to isolate sections of piping systems, especially in environments that involve aggressive media such as seawater, acidic chemicals, and high-temperature fluids. With a PN 400 pressure rating (400 bar / 5800 psi), these flanges are suitable for critical systems where both mechanical strength and corrosion resistance are vital. Ladhani Metal Corporation is a globally recognized supplier and exporter of Super Duplex DIN flanges, offering products that meet or exceed international quality, safety, and performance standards for extreme-service applications. Pressure Rating: • PN 400 (400 bar / 5800 psi): Designed for high-pressure operations in chemically aggressive and mechanically demanding environments. Flange Type: • Blind Flanges Flat, solid flanges without a bore used to seal the end of piping systems. Ideal for temporary shutdowns, pressure testing, or future system expansion. • Flat Face (FF) Flanges Feature a flat sealing surface, suitable for use with full-face gaskets and flat mating components to ensure consistent and effective sealing under pressure. Super Duplex Steel Grades and Composition: Super Duplex 2507 (UNS S32750) • Chromium (Cr): 24 – 26% • Nickel (Ni): 6 – 8% • Molybdenum (Mo): 3 – 5% • Nitrogen (N): 0.24 – 0.32% • Iron (Fe): Balance Applications: Exceptional corrosion resistance in seawater, brines, and acidic environments. Commonly used in offshore structures, desalination plants, and chemical processing systems. Applications of DIN 2627 Super Duplex Flanges PN 400: • Offshore Oil and Gas Platforms Used in topside and subsea installations exposed to high salinity, pressure, and harsh chemical environments. • Desalination and Water Treatment Plants Resistant to chloride-induced corrosion and fouling in seawater intake and brine discharge systems. • Chemical and Petrochemical Processing Ideal for aggressive process media such as chlorides, sulfur compounds, and acids at high temperatures and pressures. • Marine Engineering and Shipbuilding Excellent corrosion resistance in marine atmospheres, making them suitable for seawater cooling, ballast systems, and structural piping. • Pulp and Paper Industry Deployed in bleaching plants and alkaline recovery lines where strength and corrosion resistance are essential. • Power Generation and Nuclear Facilities Reliable under high-temperature and pressure cycles in superheated steam, feedwater, and condenser systems. Key Features: • Manufactured to DIN 2627 standard • PN 400 pressure class for ultra-high-pressure environments • Blind flange design for secure pipe end sealing or access closure • Flat face type for even gasket compression and leak-free performance • Available in Super Duplex 2507 (UNS S32750) and S32760 • Excellent resistance to pitting, crevice corrosion, and stress corrosion cracking • Twice the strength of conventional stainless steels • Widely used in offshore, marine, petrochemical, and water treatment industries • Custom options available: sizes, pressure ratings, face types, and finishes Conclusion: DIN 2627 Super Duplex Steel Flanges PN 400 by Ladhani Metal Corporation are designed to withstand the harshest industrial environments, providing unmatched corrosion resistance, mechanical strength, and sealing reliability. These flanges are ideal for mission-critical applications in offshore, marine, chemical, and energy industries. For technical assistance, custom fabrication, or detailed product specifications, contact Ladhani Metal Corporation and ensure your systems are protected by industry-leading flange solutions.

DIN 2627 stainless steel flanges PN 400 are precision-engineered blind flanges manufactured according to the DIN 2627 standard. Designed to withstand ultra-high-pressure conditions up to 400 bar (5800 psi), these flanges are used to terminate or isolate piping systems safely and effectively. Fabricated from high-grade stainless steels, including 304, 316, and 321, these blind flanges provide superior mechanical strength, corrosion resistance, and long service life in aggressive industrial environments. Ladhani Metal Corporation is a globally recognized manufacturer and exporter of stainless steel flanges. Our DIN 2627 PN 400 blind flanges are widely trusted in sectors such as oil and gas, chemical processing, marine, energy, and high-pressure utility systems for their durability, quality, and performance under extreme conditions. Pressure Rating: • PN 400 (400 bar / 5800 psi): Suitable for high-pressure pipelines and critical systems where absolute sealing and structural integrity are required. Flange Type: • Blind Flanges Solid, non-bored flanges used to block pipeline ends or vessel nozzles. These flanges are essential for system isolation during maintenance, testing, or future expansions. • Flat Face (FF) Flanges Flat face flanges are designed to mate with flat gaskets and flat-faced components. They provide even gasket compression and are ideal when used with cast iron or brittle materials to avoid flange distortion. Stainless Steel Grades and Full Composition: Stainless Steel 304 • Chromium (Cr): 18.0 – 20.0% • Nickel (Ni): 8.0 – 10.5% • Carbon (C): ≤ 0.08% (304), ≤ 0.03% (304L) • Manganese (Mn): ≤ 2.0% • Silicon (Si): ≤ 1.0% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.03% • Iron (Fe): Balance Applications: Excellent general corrosion resistance. Commonly used in food processing, water systems, and chemical equipment. Stainless Steel 316 • Chromium (Cr): 16.0 – 18.0% • Nickel (Ni): 10.0 – 14.0% • Molybdenum (Mo): 2.0 – 3.0% • Carbon (C): ≤ 0.08% (316), ≤ 0.03% (316L) • Manganese (Mn): ≤ 2.0% • Silicon (Si): ≤ 1.0% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.03% • Iron (Fe): Balance Applications: Enhanced resistance to chlorides and acidic environments. Ideal for marine, pharmaceutical, and chemical processing. Stainless Steel 321 • Chromium (Cr): 17.0 – 19.0% • Nickel (Ni): 9.0 – 12.0% • Titanium (Ti): ≥ 5 × C (typically 0.20 – 0.70%) • Carbon (C): ≤ 0.08% • Manganese (Mn): ≤ 2.0% • Silicon (Si): ≤ 1.0% • Phosphorus (P): ≤ 0.045% • Sulfur (S): ≤ 0.03% • Iron (Fe): Balance Applications: 321 stainless steel is stabilized with titanium, providing excellent resistance to intergranular corrosion after welding and high-temperature exposure. Commonly used in thermal processing, aerospace, and exhaust systems. Applications of DIN 2627 Stainless Steel Flanges PN 400: • Oil and Gas Industry Used in upstream and downstream systems, where high pressure and harsh chemicals are common. • Chemical and Petrochemical Plants Ideal for isolating high-pressure lines carrying corrosive or reactive chemicals. • Marine and Offshore Engineering Suitable for saltwater-exposed piping, ballast systems, and underwater applications requiring corrosion resistance. • Power Generation Applied in steam, nuclear, and thermal plants for sealing pressurized piping and vessel systems. • Aerospace and High-Temperature Systems 321-grade blind flanges are used in systems exposed to elevated temperatures and thermal cycling. • Water Treatment and Desalination Withstands chloride-induced corrosion in high-pressure brine and filtration lines. Key Features: • Manufactured to DIN 2627 specifications • PN 400 pressure rating for extreme pressure performance • Blind flange design ideal for system isolation and termination • Available in stainless steel grades 304, 304L, 316, 316L, and 321 • Flat face type for even gasket compression and sealing integrity • Superior corrosion resistance and mechanical strength • Suitable for aggressive chemical, marine, and high-temperature environments • Custom sizes, surface finishes, and pressure classes available upon request Conclusion: DIN 2627 Stainless Steel Flanges PN 400 by Ladhani Metal Corporation are designed for maximum performance in high-pressure, corrosive, and high-temperature environments. With material options including 304, 316, and titanium-stabilized 321 stainless steel, these blind flanges offer flexibility, reliability, and long-term service life across critical industries. Contact Ladhani Metal Corporation today for technical assistance, specifications, or custom flange solutions.

DIN 2576 Duplex Flanges PN 10 are robust, slip-on flanges engineered from duplex stainless steel, designed for piping systems operating under low to medium pressures. Manufactured according to the DIN 2576 standard, these flanges combine high mechanical strength with excellent corrosion resistance, particularly in chloride-rich and aggressive chemical environments. The slip-on configuration allows for simple positioning over the pipe and secure welding, ensuring accurate alignment and strong sealing integrity in a variety of industrial applications. Ladhani Metal Corporation is a renowned manufacturer and global exporter of duplex steel flanges, offering products that conform to international specifications in terms of dimensions, metallurgy, and performance. DIN 2576 duplex flanges are especially valued in industries requiring resistance to pitting, crevice corrosion, and stress corrosion cracking, including offshore, chemical, and wastewater systems. Pressure Rating: • PN 10 (10 bar / 145 psi): Suitable for moderate-pressure systems requiring long-term performance in harsh environments. Flange Types: • Slip-On Flanges Designed to slide over the pipe and be welded on both sides, these flanges offer easy installation and secure mechanical integrity. • Flat Face (FF) Flanges Used in conjunction with flat gaskets and flat mating surfaces, ideal for connections involving non-metallic or cast components. Duplex Stainless Steel Grades and Composition: Duplex 2205 (UNS S32205 / S31803) Composition: • Chromium (Cr): 21.0 – 23.0% • Nickel (Ni): 4.5 – 6.5% • Molybdenum (Mo): 2.5 – 3.5% • Nitrogen (N): 0.14 – 0.20% • Iron (Fe): Balance Applications: Duplex 2205 offers twice the yield strength of conventional stainless steels with superior resistance to chloride-induced corrosion. Common applications include chemical processing, desalination, marine systems, and structural components in offshore platforms. Applications of DIN 2576 Duplex Flanges: • Offshore and Marine Engineering Ideal for seawater cooling systems, risers, and structural supports exposed to harsh marine environments. • Chemical and Petrochemical Industries Used in systems handling aggressive acids, chlorides, and solvents where standard stainless steels are insufficient. • Water Treatment and Desalination Applied in brine systems, high-salinity piping, and reverse osmosis plants for their resistance to pitting and scaling. • Pulp and Paper Industry Resists corrosion from bleaching chemicals and process fluids under high pressure. • Oil and Gas Suitable for pressure control systems, separators, and sour service applications. • Structural and Pressure Vessel Fabrication Used in tanks, pressure vessels, and piping subjected to mechanical and corrosive stress. Key Features: • Compliant with DIN 2576 standards • PN 10 pressure rating for moderate-pressure use • Excellent resistance to chloride stress corrosion, pitting, and crevice corrosion • High strength-to-weight ratio, reducing component size and cost • Available in Duplex 2205, Super Duplex 2507, and other custom grades • Slip-on design ensures quick and accurate pipe connections • Flat face options compatible with a variety of gaskets and materials • Ideal for chemical, marine, oil and gas, and water treatment sectors • Custom dimensions, face types, and surface finishes available Conclusion: DIN 2576 Duplex Flanges PN 10 from Ladhani Metal Corporation provide outstanding durability and corrosion resistance for challenging industrial environments. With availability in Duplex 2205 and Super Duplex 2507, these flanges are a reliable solution for systems exposed to high chlorides, pressure, and temperature. For technical specifications, grade selection, or project-specific orders, contact Ladhani Metal Corporation today.

The DIN 2558 Super Duplex Flange PN 6 is a high-performance piping component engineered for the most demanding industrial applications. Designed in accordance with DIN (Deutsches Institut für Normung) specifications, these flanges are manufactured from premium-grade super duplex stainless steel, offering outstanding mechanical strength and superior corrosion resistance, particularly in aggressive environments. Supplied by Ladhani Metal Corporation, these flanges are trusted by industries that require durability, safety, and long-lasting performance. Super duplex flanges are widely used in offshore oil and gas, petrochemical, chemical processing, desalination, and marine applications where resistance to stress corrosion cracking, pitting, and erosion is essential. The PN 6 pressure rating (6 bar or approximately 87 psi) makes them suitable for medium-pressure systems requiring robust and corrosion-resistant connections. Types: Weld Neck Flange – Offers a strong welded connection ideal for high-pressure and high-temperature systems. Slip-On Flange – Easy to install and weld, suitable for lower-stress applications. Blind Flange – Used to seal off the end of a pipeline, ensuring zero leakage. Threaded Flange – Provides a screw-type connection where welding isn’t preferred. Socket Weld Flange – Ideal for small-diameter, high-pressure applications requiring a smooth bore and secure weld. Grade & Chemical Composition: Super Duplex 2507 (UNS S32750): Chromium (Cr): 24.0 – 26.0% Nickel (Ni): 6.0 – 8.0% Molybdenum (Mo): 3.0 – 5.0% Nitrogen (N): 0.24 – 0.32% Manganese (Mn): ≤ 1.2% Silicon (Si): ≤ 0.8% Carbon (C): ≤ 0.03% Iron (Fe): Balance Key Properties: Exceptional resistance to chloride-induced stress corrosion cracking, pitting, and crevice corrosion High tensile and yield strength—almost double that of conventional austenitic stainless steels Outstanding performance in seawater and chemically aggressive environments PN 6 Rating: The PN 6 pressure rating corresponds to 6 bar (approximately 87 psi), making this flange ideal for medium-pressure pipelines where superior strength and corrosion resistance are required for safe and long-lasting operation. Features: Corrosion Resistance: Excellent resistance to both uniform and localized corrosion, even in chloride-rich environments such as seawater. High Mechanical Strength: Delivers outstanding load-bearing capacity, enabling the use of thinner wall sections for lighter system design. Long Service Life: Built for durability in extreme conditions, reducing maintenance and replacement costs over time. Stress Corrosion Resistance: Provides safety in high-stress, high-temperature, and aggressive chemical conditions. Industry Versatility: Widely used in offshore platforms, chemical plants, desalination units, marine vessels, and high-performance piping systems. Cost Efficiency: High strength and corrosion resistance allow for optimized system design with reduced material usage. Ladhani Metal Corporation ensures that each DIN 2558 Super Duplex Flange is manufactured using advanced technology and strict quality control processes. These flanges deliver the strength, reliability, and corrosion resistance required in the most challenging industrial applications—offering a dependable, long-term solution for critical infrastructure. #din2558 #din2558flanges #din2558superduplexflanges #flanges

The DIN 2558 Duplex Flange PN 6 is a high-quality, precision-engineered piping component designed to deliver exceptional mechanical strength and corrosion resistance in harsh industrial environments. Manufactured to DIN (Deutsches Institut für Normung) standards, these flanges are produced using premium duplex stainless steels, which combine the benefits of both austenitic and ferritic stainless steels. Ladhani Metal Corporation supplies these flanges with a strong focus on durability, reliability, and performance under challenging operating conditions. Duplex flanges are widely used in industries such as oil and gas, petrochemical, marine, desalination, pulp and paper, and chemical processing—where resistance to stress corrosion cracking, pitting, and crevice corrosion is essential. The PN 6 pressure rating (6 bar or approximately 87 psi) makes these flanges suitable for medium-pressure systems that demand both structural integrity and long service life. Types: Weld Neck Flange – Provides a robust, welded connection ideal for high-stress, high-temperature applications. Slip-On Flange – Offers ease of installation and is welded on both the inner and outer surfaces for a secure fit. Blind Flange – Used to close the end of a pipe system, ensuring leak-tight sealing. Threaded Flange – Allows for easy, non-welded connection to piping systems with threaded ends. Socket Weld Flange – Ideal for smaller-diameter high-pressure lines, offering smooth flow and strong connections. Grades & Chemical Composition: Duplex 2205 (UNS S31803/S32205): Chromium (Cr): 21.0 – 23.0% Nickel (Ni): 4.5 – 6.5% Molybdenum (Mo): 2.5 – 3.5% Manganese (Mn): ≤ 2.0% Silicon (Si): ≤ 1.0% Nitrogen (N): 0.14 – 0.20% Carbon (C): ≤ 0.03% Iron (Fe): Balance Key Features: Excellent resistance to pitting, crevice corrosion, and chloride-induced stress corrosion cracking. Superior strength compared to standard stainless steels PN 6 Rating: The PN 6 rating signifies a nominal pressure capacity of 6 bar (approximately 87 psi), making these flanges suitable for medium-pressure applications in both industrial and marine systems where enhanced corrosion resistance and mechanical strength are required. Features: Corrosion Resistance: Excellent resistance to a wide range of corrosive environments, especially chlorides and sulfides. High Strength: Duplex steel offers nearly twice the strength of conventional austenitic stainless steel, reducing wall thickness and weight. Stress Corrosion Resistance: Ideal for applications involving aggressive media and fluctuating temperatures. Longevity: Designed to offer extended service life with minimal maintenance in severe environments. Versatile Use: Applicable in offshore platforms, chemical plants, desalination systems, and high-performance piping networks . Cost-Efficient: Combines strength and corrosion resistance, often allowing for reduced material thickness and overall system weight. Ladhani Metal Corporation ensures that each DIN 2558 Duplex Flange is precision-machined and rigorously tested to meet or exceed international standards. These flanges offer a reliable, leak-proof solution for critical piping systems, balancing performance, safety, and long-term value.

Product Name: Titanium Pipe Standard: ASTM B861, ASTM B862 Material: Gr7 Type: Welded/Seamless Shape: Round Outer Diameter: 3-114mm or as customized Wall Thickness: 0.5-7mm or as customized Length: Max 12000mm Surface: Bright Product Information of Grade 7 Titanium Pipe Material: Gr7 Standard: ASTM B861, ASTM B862 OD: 3-114mm or as customized WT: 0.5-7mm or as customized Length: Max 12m Type: Welded/Seamless Surface: Polishing, Pickling Grade 7 Titanium Grade 7 titanium has physical and mechanical properties equivalent to Grade 2 titanium (CP3). It has excellent welding and fabrication properties and is extremely resistant to corrosion, especially from reducing acids.

Product name:Titanium Sheet Unit price:$15.5-$36.9/kg Material: Titanium Grade 5 (Ti6al4v) Standard: ASTM/ASME B265 AMS 4911 ASTM F136 Demension: Thickness*1000*2000mm Thickness*3000*6000mm (Standard size); Thickness: 0.5mm; 0.8mm; 1.0mm; 1.2mm; 1.5mm; 2.0mm; 3.0mm; 4.0mm ......40mm etc br>Technique : Rolled Status: Annealed(M) MTC: EN10204.3.1 certificate MOQ : 10kgs Applications : Petroleum ,chemical industry, Marine, medical Package:Standard export packaging, inside foam film and pearl cotton protection, outside fumigation-free plywood case. Customized size welcome. Hot rolled titanium plate Titanium plate gr5 Grade 5 titanium plate titanium alloy plate Ti6al4v plate Grade 5 titanium is one of the most commonly used alloys in titanium industry, accounting for 50% of the world titanium consumption. Also known as Ti-6Al-4V (or ti6-4), this name refers to its main chemical composition of 90% titanium, 6% aluminum, 4% vanadium, 0.25% (maximum) iron and 0.2% (maximum) oxygen. It has almost the same high corrosion resistance as pure titanium, but has better strength, low elastic modulus, good weldability and heat treatment. The addition of aluminum and vanadium improves the hardness and physical and mechanical properties of the alloy. Product name:Titanium Sheet ,grade 5 titanium sheet ,titanium alloy sheet,10mm titanium sheet,5mm titanium sheet,gr5 titanium sheet,6Al4V sheet, Ti6Al4V titanium sheet,Titanium sheet plate price per kg Material: Titanium Grade 5 (Ti6al4v) Standard: ASTM/ASME B265, AMS 4911, ASTM F136 Demension: Thickness*1000*2000mm Thickness*3000*6000mm (Standard size); Thickness: 0.5mm; 0.8mm; 1.0mm; 1.2mm; 1.5mm; 2.0mm; 3.0mm; 4.0mm ......40mm etc Technique : Rolled Status: Annealed(M) MTC: EN10204.3.1 certificate Grade 5 (Ti6Al4V) titanium sheet/plate Chemical compositions(weight%,<=) Ti Al V Fe C Remainder 5.5-6.75 3.5-4.5 0.30 0.08 N H O Other(total) 0.05 0.015 0.2 0.4 Physical properties(>=) Σb Tensile Strength (Mpa) σr0.2 Yield Strength (Mpa) δL0+50mm Elongation (%) ψ Reduction of area (%) 895 830 12 25